Academic literature on the topic 'Pyrrolo[3,4 c]pyrazole'

William Pitt and co-workers have created a virtual exploratory heterocyclic library ‘VEHICLe’ containing over 200 unconquered bicyclic heteroaromatic rings, synthetically feasible with potential medicinal interest. Since the publication of the 22 ‘heteroaromatic rings of the future’ by Pitt in 2009, 15 of them have been successfully synthesized as bicyclic or polycyclic forms and evaluated for applications in both biology and material science. This short review presents the critical synthesis associated with innovative synthetic methodologies of the synthetically conquered ring scaffolds from the list of 22 with a spotlight on the scientific contribution of this fascinating article for the expansion of the chemical diversity.1 Introduction2 Heteroaromatic Rings of the Future: The Synthetic challenge?2.1 4-Pyrido[1,3]oxazin-4-one-P1 2.2 Pyrrolo[2,1-b][1,3]oxazin-4-one-P4 2.3 Furo[2,1-e]pyridazin-4(1H)-one-P5 2.4 Isoxazolo[3,4-c]pyridin-7-one-P6 2.5 5H,6H-[1,2]Thiazolo[5,4-c]pyridin-5-one-P7 2.6 4H,5H-Furo[3,2-b]pyridin-5-one-P8 2.7 1H,5H,6H-Pyrazolo[3,4-c]pyridin-5-one-P9 2.8 Thieno[3,4-c]pyridazine-P10 2.9 Pyrrolo[1,2-c][1,2,3]triazine-P11 2.10 Thieno[3,4-a]oxazole-P12 2.11 2,4-Dihydropyrrolo[3,2-c]pyrazole-P13 2.12 Pyrazolo[1,5-b]isoxazole-P14 2.13 Imidazo[1,5-c]pyrimidin-3(2H)-one-P16 2.14 Cyclopenta[b][1,4]oxazin-5(4H)-one-P17 2.15 2,3-Dihydro-2,6-naphthyridin-3-one-P18 3 Conclusion

In this study the synthesis of novel carbothiomides derivatives containing pyrazole moiety have been carried out by use of microwave assisted green and efficient process. The starting compound N-phenyl substituted succinamides 5a-b were condensed with substituted benzaldehydes furnished in to bis-heterocyclic chalcones which on treatment with thiosemicarbazide hydrochloride leads to formation of pyrralo dipyrazole carbothiomide derivatives. The structures of all synthesized compounds were determined by FT IR, 1H NMR, 13CNMR spectral analysis techniques. The pyrazole carbothiomide derivatives were selected for evaluation of antimicrobial activities. The in vitro antibacterial screening was carried out against Gram positive bacteria Staphylococcus auras, Bacillus subtilis and Gram negative bacteria Pseudomonas aeruginosa, Escherichia coli. The antibacterial activity was measured in term of zone of inhibition in mm unit and compared with standard antibiotic drug Chloramphenicol. Similarly antifungal evaluation was also evaluated in vitro against fungi Aspergillus niger and Candida albicans. The zone of inhibition was measured in mm and compared with standard antifungal drug Amphotericin-B. The all carbothiomide derivatives showed good anti-bacterial activities against gram positive bacteria and good anti-fungal activities. The compounds 9ai and 9aiv showed potent antifungal activity against Candida albicans than standard drug amphotericin-B at 100 μgm/mL concentration.

The title compound C12N6H14, 1, crystallizes in the space group P21/n (a = 8.222(2) Å, b = 27.336(8) Å, c = 5.574(2) Å, α = 90.00°, β = 100.97(4)°, γ = 90.00°), Z = 4, d = 1.308 g cm−3. The conformation about the N—C bonds linking the pyrazole rings can be defined as EZ, with "pyridine-like" nitrogen atoms in an anti disposition [Formula: see text] and "pyridine-like" and "pyrrole-like" nitrogen atoms in a syn disposition [Formula: see text] with regard to the central pyrazole. Intermolecular hydrogen bonds between the central and the terminal pyrazole ring of configuration Z form centrosymmetric dimers. They pack in sheets nearly parallel to the (−2 3 1) plane. Its tautomerization barrier has been determined in methanol-d4; the value, 11.9 kcal mol−1, is similar to those of 3,5-dimethyl-4-chloropyrazole (12.8 kcal mol−1) and 3,5-dimethyl-4-nitropyrazole (12.1 kcalmol−1). These values together with the shape of the conformational potential surface (calculated using the AM1 Hamiltonian) suggest that, in compound 1, prototropy and rotation about the N—C bonds linking the three pyrazole rings take place simultaneously.

The butylidene-linker models 1-[2-(2,6-dimethylsulfanyl-9H-purin-9-yl)-2-methylidenepropyl]-4,6-bis(methylsulfanyl)-1H-pyrazolo[3,4-d]pyrimidine, C18H20N8S4, (XI), 7,7′-(2-methylidenepropane-1,3-diyl)bis[3-methyl-2-methylsulfanyl-3H-pyrrolo[2,3-d]pyrimidin-4(7H)-one], C20H22N6O2S2, (XIV), and 7-[2-(4,6-dimethylsulfanyl-1H-pyrazolo[3,4-d]pyrimidin-1-yl)-2-methylidenepropyl]-3-methyl-2-methylsulfanyl-3H-pyrrolo[2,3-d]pyrimidin-4(7H)-one, C19H21N7OS3, (XV), show folded conformations in solution, as shown by1H NMR analysis. This folding carries over to the crystalline state. Intramolecular π–π interactions are observed in all three compounds, but only (XIV) shows additional intramolecular C—H...π interactions in the solid state. As far as can be established, this is the first report incorporating the pyrrolo[2,3-d]pyrimidine nucleus for such a study. In addition to the π–π interactions, the crystal structures are also stabilized by other weak intermolecular C—H...S/N/O and/or S...N/S interactions.

In the title compound, C15H13N3O, the pyrrolyl and phenyl rings make dihedral angles of 58.99 (5) and 34.95 (5)°, respectively, with the central pyrazole ring. In the crystal, weak, pairwise C—H...O interactions across centers of symmetry form dimers, which are further associated into corrugated sheets running approximately parallel to (100)viaweak C—H...N interactions.

The title compound, C21H17N7O4, is in an `extended' conformation aided by an intramolecular N—H...O hydrogen bond. The pyrazole ring makes dihedral angles of 29.17 (6), 65.47 (4) and 9.91 (7)°, respectively, with the phenyl, pyrrole and benzene rings. In the crystal, molecules are connected by pairs of N—H...O and C—H...O hydrogen bonds, forming inversion dimers which associate into ribbons running along thebaxis through complementary C—H...O interactions.

AbstractThe effect of microwave irradiation on the reactions of 2-[3-(trifluoromethyl)phenyl]-4-R1-furo[3,2-b]pyrrole-5-carboxhydrazides 1 with 5-arylfuran-2-carboxaldehydes 2, thiophene-2-carboxaldehyde (3) and methyl 2-formylfuro[3,2-b]pyrrole-5-carboxylates 4 has been studied. Reactions of 1 with formic and acetic acid, respectively, led to acylhydrazides 9a–c. Reaction of 1a with 4-substituted 1,3-oxazol-5(4H)-one 10 led to imidazole derivative 13. 1,2,4-Triazole-3-thiones 15a,b were synthesized by two-step reaction of 1a with potassium isothiocyanate and phenyl isothiocyanate, respectively, and subsequent base-catalyzed cyclization of thiosemicarbazides 14a,b. Pyrazole 16 was prepared by reaction of 1a with pentane-2,4-dione.

The title compound, C15H14N4O, crystallizes with two molecules in the asymmetric unit with similar conformations (r.m.s. overlay fit for the 20 non-H atoms = 0.175 Å). In the first molecule, the dihedral angles between the planes of the central pyrazole ring and the pendant phenyl and pyrrole rings are 42.69 (8) and 51.88 (6)°, respectively, with corresponding angles of 54.49 (7) and 49.61 (9)°, respectively, in the second molecule. In the crystal, the two molecules, together with their inversion-symmetry counterparts, are linked into tetramers by O—H...N hydrogen bonds. The tetramers form layers parallel to (211) through pairwise C—H...π interactions.

Les recherches effectuées au cours de ce travail de thèse sont centrées sur les dérivés cycliques de type 2-azahetaryl-3-énaminonitrile qui représentent une structure d'intérêt du fait de son nombre élevé de sites réactifs potentiels. La fonctionnalisation régiosélective de chaque site donne en effet accès à des une grande diversité structurelle de composés azoté et substitué par un azahétérocycle. Un atout majeur des 2-azahetaryl-2-(1-R-pyrrolidin-2-ylidene)acétonitriles est leur grande accessibilité à partir de matières premières simples et bon marché. Nous avons pu étudier leur emploi dans la synthèse des pyrazoles (isoxazoles). Ils jouent alors le rôle de diélectrophiles 1,3. L'action d'hydrazine (hydroxylamine) conduit à des 5-amino-4- azahetaryl-3-(ω-aminopropyl)-1H-pyrazole (isoxazole) formés avec une régiosélectivité complète et de bons rendements 50-85%. Ceci établit une approche en deux étapes efficace et facilement reproductible à des amino-pyrazoles substitués par des hétérocycles à partir d'acétonitriles hétérocycliques. Des transformations subséquentes ont été réalisées donnant accès à des polyamino-azoles dérivatisés régiosélectivement, à des composés tétracycliques jusqu'à un rendement global de 45% et à des pyrazoles arylés jusqu'à 71% de rendement par diazotation suivie d'une arylation par couplage croisé Suzuki-Miyaura ou C-H activation. Nous avons illustré une protection de l'azote efficace sous forme de nitrosamine pendant le couplage croisé catalysé par Pd. Nous avons également effectué la quaternarisation de l'azote de l'hétérocycle pour étudier l'effet d'une moitié cationique sur la régiosélectivité de la réaction de tels dérivés 2-azahetaryl-3-énaminonitrile avec des 1,2-binucléophiles. L'augmentation de la demande en électrons sur l'hétérocycle a induit un changement de chemin réactionnel qui a conduit à un produit issu de l'ouverture du cycle azole. Une différence de réactivité entre les dérivés du benzoxazole et du benzimidazole d'une part et du benzothiazole d'autre part a été observée. Alors que les premiers suivent la voie d'ouverture de cycle, le second suit une transformation "classique" puis une substitution nucléophile au centre C-2 du benzothiazole conduisant à la formation du cycle de l'azépine. Dans le cas des énaminonitriles substitués par un benzoxazolyle dans les mêmes conditions, les deux régioisomères sont formés. La réaction de formylation du 2-(benzo[d]thiazol-2-yl)-2-(pyrrolidin-2-ylidène) acétonitrile avec le N,N-diméthylformamide diméthylacétal (DMF DMA), suivie d'une amination et d'une cyclisation dans des conditions basiques a engendré à la pyrrolo[3,2-c]pyridine-6-imine, un composé qui présente un rendement quantique fluorescent élevé (Φ = 61%) et s'est révélé très sensible à la protonation. Les deux caractéristiques devraient être utiles pour développer un test de détection d'eau originaux pour les solvants aprotiques. Nous avons démontré qu'une telle méthode fluorométrique pour déterminer la teneur en eau dans le DMSO présente une limite de détection de 0,068%
The research carried out in the course of this PhD work is centered on cyclic 2-azahetaryl-3-enaminonitrile derivatives which represent an attractive scaffold due to its high number of potential reactive sites. Regioselective functionalization of each site may give access to various structurally different Nitrogen-containing moieties featuring an azaheterocycle substituent. One first application in heterocyclic synthesis of 2-azahetaryl-2-(1-R-pyrrolidin-2-ylidene)acetonitriles, readily accessed from available and cheap starting materials, is their involvement in Knorr-type synthesis of pyrazoles (isoxazoles) where they play the role of the 1,3-dielectrophiles. Thus 4-azahetaryl-3-(ω-aminopropyl)-1H-pyrazole (isoxazole)-5-amines are formed with complete regioselectivity in good yields 50-85%. This establishes an efficient and easily reproducible two-step approach to heterocycle- substituted amino-pyrazoles from heterocyclic acetonitriles. Unprecedented subsequent transformations were carried out providing an access to regioselectively derivatized polyamino azoles, tetracyclic compounds in up to 45% overall yield and arylated pyrazoles in up to 71% yield through diazotization, followed by arylation through Suzuki-Miyaura cross-coupling or C-H activation. We illustrated the unprecedented but efficient nitrogen protection as a nitrosamine during the Pd-catalyzed cross-coupling. Also the possibility of pyrazoles C-H activation in order to get densely substituted pyrazoles was shown for the first time. We also performed the quaternarization of the nitrogen of the heterocycle to investigate the effect of a cationic moiety on the regioselectivity of the reaction of such azahetaryl-3-enaminonitrile derivatives with 1,2-binucleophiles. The increased electron demand on the heterocycle induced a reaction path shift that produced the azole ring- opened product. Derivatives of benzoxazole and benzimidazole form second way products straight away, while the one of benzothiazole undergoes the "classical" transformation pathway and subsequent nucleophilic substitution at C-2 center of benzothiazole leading to azepine cycle formation. In the case of benzoxazolyl substituted enaminonitriles under the same conditions both regioisomers are formed. Formylation reaction of 2-(benzo[d]thiazol-2-yl)-2-(pyrrolidin-2-ylidene) acetonitrile with N,N-dimethylformamide dimethyl acetal (DMF DMA), followed by further reamination and cyclization under basic conditions gave rise to pyrrolo[3,2-c]pyridine-6-imine, a compound that exhibits a high fluorescent quantum yield (Φ = 61%) and proved to be very sensitive to protonation. Both characteristics are expected to be useful to develop an unprecedented water detection test for aprotic solvents. We have demonstrated that such a fluorometric method for determining water content in DMSO presents a limit of detection of 0.068%. From other enaminonitriles reactions with DMF DMA provided either a mixture of methylated and formylated products, or only methylated products (few adducts also shown non reactivity). These observations prompted us to assume that the presence of easily accessible NH group is essential in formylation of the C-3 center of pyrrolidine allowing to propose a mechanism for this uncommon reaction. 2-Azahetaryl-2-(pyrrolidin-2-ylidene)acetonitriles and their 3-oxo-benzo- analogues were also used to create: a) visible spectrophotometric probes for Zn(II) b) water stable BF2-rigidified complexes that overcome the limitations of BODIPY-dyes and have Stokes shifts up to 9000 cm-1, emission at violet-blue range, fluorescence both in solution (Φ up to 90%) and crystalline state; c) films of polymeric composites exhibiting photovoltaic effect

The previously described 2-aryl-4-chloro-3-iodoquinolines were prepared following literature procedure and in turn converted to the corresponding hitherto unknown 2-aryl-3-iodo-4-(phenylamino)quinoline derivatives using aniline in refluxing ethanol. These 2-aryl-3-iodo-4-(phenylamino)quinolines were reacted with allybromide in ethanol at room temperature to afford 4-(N,N-allylphenylamino)-2-aryl-3-iodoquinoline derivatives. The 2-aryl-3-iodo-4-(phenylamino)quinoline and 4-(N,N-allylphenylamino)-2-aryl-3-iodoquinoline derivatives were subjected to metal-catalysed carbon-carbon bond formations. Palladium(0)-copper iodide catalysed Sonogashira cross-coupling of 2-aryl-3-iodo-4-(phenylamino)quinoline with terminal alkynes afforded series of 1,2,4-trisubstituted 1H-pyrrolo[3,2-c]quinolines in a single step operation. On the other hand, the 4-(N,N-allylphenylamino)-2-aryl-3-iodoquinoline derivatives were found to undergo palladium-catalysed intramolecular Heck reaction to yield the corresponding 1,3,4-trisubstituted 1H-pyrrolo[3,2-c]quinolines. All new compounds were characterized by using a combination of NMR (1H and 13C), IR, mass spectroscopic techniques as well as elemental analysis.
Chemistry
MSc. (Chemistry)

Rubén Vicente and Luis A. López at the University of Oviedo in Spain reported (Angew. Chem. Int. Ed. 2012, 51, 8063) the synthesis of cyclopropyl furan 2 from alkylidene 1 and styrene by way of a zinc carbene intermediate. The same substrate 1 was also converted (Angew. Chem. Int. Ed. 2012, 51, 12128) to furan 3 via catalysis with tetrahydrothiophene in the presence of benzoic acid by J. Stephen Clark at the University of Glasgow. Xue-Long Hou at the Shanghai Institute of Organic Chemistry discovered (Org. Lett. 2012, 14, 5756) that palladacycle 6 catalyzes the conversion of bicyclic alkene 4 and alkynone 5 to furan 7. A silver-mediated C–H/C–H functionalization strategy for the synthesis of furan 9 from alkyne 8 and ethyl acetoacetate was developed (J. Am. Chem. Soc. 2012, 134, 5766) by Aiwen Lei at Wuhan University. Ning Jiao at Peking University and East China Normal University found (Org. Lett. 2012, 14, 4926) that azide 10 and aldehyde 11 could be converted to either pyrrole 12 or 13 with complete regiocontrol by judicious choice of a metal catalyst. Meanwhile, Michael A. Kerr at the University of Western Ontario developed (Angew. Chem. Int. Ed. 2012, 51, 11088) a multicomponent synthesis of pyrrole 16 involving the merger of nitrone 14 and the donor–acceptor cyclopropane 15. The pyrrole 16 was subsequently converted to an intermediate in the synthesis of the cholesterol-lowering drug compound Lipitor. A robust synthesis of the ynone trifluoroboronate 17 was developed (Org. Lett. 2012, 14, 5354) by James D. Kirkham and Joseph P.A. Harrity at the University of Sheffield, which thus allowed for the ready production of trifluoroboronate-substituted pyrazole 18. An alternative pyrazole synthesis via oxidative closure of unsaturated hydrazine 19 to produce 20 was reported (Org. Lett. 2012, 14, 5030) by Yu Rao at Tsinghua University. A unique fluoropyrazole construction was developed (Angew. Chem. Int. Ed. 2012, 51, 12059) by Junji Ichikawa at the University of Tsukuba that involved nucleophilic substitution of two of the fluorides in 21 to form pyrazole 22.

Masahiro Yoshida of the University of Tokushima described (Tetrahedron Lett. 2008, 49, 5021) the Pt-mediated rearrangement of alkynyl oxiranes such as 1 to the furan 2. Roman Dembinski of Oakland University reported (J. Org. Chem. 2008, 73, 5881) a related zinc-mediated rearrangement of propargyl ketones to furans. The cyclization of aryloxy ketones such as 3 to the benzofuran 4 developed (Tetrahedron Lett. 2008, 49, 6579) by Ikyon Kim of the Korea Research Institute of Chemical Technology is likely proceeding by a Friedel-Crafts mechanism. Sandro Cacchi and Giancarlo Fabrizi of Università degli Studi “La Sapienza”, Roma, observed (Organic Lett. 2008, 10, 2629) that base converted the enamine 5 to the pyrrole 6. Alternatively, oxidation of 5 with CuBr led to a pyridine. Zhuang-ping Zhuan of Xiamen University prepared (Adv. Synth. Cat. 2008, 350, 2778) pyrroles such as 9 by condensing an alkynyl carbinol 7 with a 1,3-dicarbonyl compound. Richard C. Larock of Iowa State University found (J. Org. Chem. 2008, 73, 6666) that combination of an alkynyl ketone 10 with 11 followed by oxidation with I-Cl led to the pyrazole 12. The “click” condensation of azides with alkynes, leading to the 1,4-disubstituted 1,2,3- triazole, has proven to be a powerful tool for combinatorial synthesis. Valery V. Fokin of Scripps/La Jolla and Zhenyang Lin and Guochen Jia of the Hong Kong University of Science and Technology have developed (J. Am. Chem. Soc. 2008, 130, 8923) a complementary approach, using Ru catalysts to prepare 1,5-disubstituted 1,2,3- triazoles. Remarkably, internal alkynes participate, and, as in the conversion of 13 to 15, propargylic alcohols direct the regioselectivity of the cycloaddition. A variety of methods have been put forward for functionalizing pyridines. Sukbok Chang of KAIST described (J. Am. Chem. Soc. 2008, 130, 9254) the direct oxidative homologation of a pyridine N -oxide 16 to give the unsaturated ester 18. Jonathan Clayden of the University of Manchester observed (Organic Lett. 2008, 10, 3567) that metalation of 19 gave an anion that rearranged to 20 with complete retention of enantiomeric excess. Shigeo Katsumura of Kwansei Gakuin University developed (Tetrahedron Lett. 2008, 49, 4349) an intriguing three-component coupling, combining 21, 22, and methanesulonamide 23 to give the pyridine 24.