Relevant bibliographies by topics / Pyrotechnic devices

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Pyrotechnic devices'

Author: Grafiati
Published: 15 February 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Pyrotechnic devices.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Pyrotechnic devices"

1

Rossi, Carole, and Ruiqi Shen. "Miniaturized Pyrotechnic Systems Meet the Performance Needs While Limiting the Environmental Impact." Micromachines 13, no. 3 (February 26, 2022): 376. http://dx.doi.org/10.3390/mi13030376.

Full text
Abstract:
Pyrotechnic systems, also termed pyrotechnics, refer to a broad family of sophisticated single-use devices that are able to produce heat, light, smoke, sound, motion, and/or a combination of these thanks to the reaction of an energetic material (primary and secondary explosives, powders/propellants, and other pyrotechnic substances) [...]
APA, Harvard, Vancouver, ISO, and other styles
2

Kim, Bae-Seong, and Juho Lee. "Development of Impact Test Device for Pyroshock Simulation Using Impact Analysis." Aerospace 9, no. 8 (July 28, 2022): 407. http://dx.doi.org/10.3390/aerospace9080407.

Full text
Abstract:
Pyrotechnic-separation devices are widely used in the separation mission of satellites and projectiles. The pyroshock generated by the pyrotechnic-separation device can cause serious damage to surrounding electronic equipment owing to its high-frequency characteristics, which leads to mission failure. Therefore, solving the pyroshock problem is necessary. Typically, attenuation of the pyroshock propagation based on the understanding of the shock-propagation characteristics of a structure is possible. However, as pyrotechnics (or explosives) cannot be used for every pyroshock-propagation experiment due to the high cost and risk, a device for simulating a pyroshock environment that does not use pyrotechnics is required. In this study, a pyroshock simulator was developed, which could generate the desired shock environment by controlling shock environment-generation variables and be tested for any test structure. For this purpose, a resonator attached to the test structure and a pneumatic launch device was designed and fabricated. A resonator that generates a desired shock environment was designed by predicting the shock generation through impact analysis. A pyroshock simulator that generates a shock like an actual pyroshock was developed through comparison with the shock-response spectrum of a pyrotechnic initiator. The repeatability was verified, and the frequency and magnitude of the shock generated by the pyroshock simulator could be controlled by adjusting the collision velocity of the steel ball and the thickness of the resonator disk.
APA, Harvard, Vancouver, ISO, and other styles
3

Zhu, Yubo, Jili Rong, Qianqiang Song, and Zhipei Wu. "Research on Reliability Evaluation Method of Aerospace Pyrotechnic Devices Based on Energy Measurement." Applied Sciences 10, no. 22 (November 19, 2020): 8200. http://dx.doi.org/10.3390/app10228200.

Full text
Abstract:
High reliability is the basic requirement of aerospace pyrotechnic devices. Traditional reliability evaluation methods require a lot of tests, which become too expensive; therefore, the small-sample evaluation method is needed to reduce the cost. Using energy as a performance parameter can better reflect the essence of the function of the pyrotechnic device compared to using force. Firstly, this article assumes that the strength obeys the normal distribution, and the stress is a constant; therefore, the reliability evaluation formula based on the t distribution is proposed. Then, taking the pin puller as the research object, four sets of energy measuring devices were developed so as to obtain its performance parameters. Finally, the evaluation results show that the pin puller has a high reliability of 0.9999999765 with a confidence level of 0.995. The reliability method proposed in this paper is a small-sample method for evaluating aerospace pyrotechnic devices, which can greatly reduce the cost of reliability evaluation. Moreover, the energy measuring devices developed in this paper can provide a new way of measuring performance parameters for piston-type pyrotechnic devices.
APA, Harvard, Vancouver, ISO, and other styles
4

Himelblau, Harry. "Pyrotechnic devices and their applications." Journal of the Acoustical Society of America 111, no. 5 (2002): 2359. http://dx.doi.org/10.1121/1.4777943.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Geibig, Alfred. "Pyrotechnic Devices from Coburg Castle." Royal Armouries Yearbook 6, no. 1 (December 31, 2001): 88–97. http://dx.doi.org/10.1080/30650682.2001.12426707.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Warchoł, Radosław, Marcin Nita, and Rafał Bazela. "FACTORS AFFECTING THE OPERATING PARAMETERS OF PYROTECHNIC DELAY DEVICES." PROBLEMY TECHNIKI UZBROJENIA, no. 4 (March 2, 2017): 87–106. http://dx.doi.org/10.5604/01.3001.0010.0481.

Full text
Abstract:
The paper analyses information available in literature on factors influencing the parameters of pyrotechnic delay devices (PDD). The literature includes research and development reports of mostly foreign origin. The main component of PDDs is a pyrotechnic delay charge (PDC) which may consist of one or more pyrotechnic delay mixtures (PDM). The use of appropriate PDM and maintaining its required parameters during service life decides about its usefulness for the ordnance. The paper describes the factors affecting the operation of PDDs. These factors are divided into internal ones, closely related to the structure of PDDs, and external ones. Described factors affecting the operation of PDDs were additionally illustrated by test results. Collected information can be useful for people involved in designing and testing the PDDs.
APA, Harvard, Vancouver, ISO, and other styles
7

Volkov, M. V. "Modernization of the electromechanical equipment the trigger device: description of the design and testing." Spacecrafts & Technologies 5, no. 3 (September 24, 2021): 137–45. http://dx.doi.org/10.26732/j.st.2021.3.02.

Full text
Abstract:
At present, modern spacecraft use high-precision equipment that is sensitive to influence impacts. In this regard, there is a need to create shock-free trigger devices for mechanisms for holding and releasing movable structural elements. These tasks determined the vector of development of electromechanical trigger devices that do not contain pyrotechnic devices in their design. Along with the new tasks, there are constant problems of rocket and space technology – the improvement of mass-dimensional characteristics. However, pyrotechnic elements force the use of massive housings and brackets for structures that can withstand a sharp increase in pressure and the impact of the executive parts. The use of universal pyropatrons does not always allow optimizing the design of the retention mechanism. Also, one of the disadvantages of working with pyrotechnic media is the increased risk of working. The paper presents the results of a study of the possibility of modernizing the design of trigger devices, improving their mechanical and electrical characteristics. The research was carried out using calculated and experimental methods, and experimental samples of trigger devices were manufactured and released. As a result of the work, an upgraded trigger device was developed, better electrical characteristics were achieved, power consumption was reduced (the response time was reduced), mass-dimensional characteristics were improved, and the number of structural parts was reduced.
APA, Harvard, Vancouver, ISO, and other styles
8

Tóth, Nikolett Ágnes, and Lajos Móró. "Szurkolói rendbontások a stadionokban, különös tekintettel a pirotechnikai eszközök alkalmazására." Belügyi Szemle 73, no. 1 (January 21, 2025): 127–42. https://doi.org/10.38146/bsz-ajia.2025.v73.i1.pp127-142.

Full text
Abstract:
Aim: The study examines the provision of spectator team sports, with particular reference to football matches. Unfortunately, the use of pyrotechnic devices is popular among fans attending spectator team sports matches all over the world, but the use of pyrotechnic devices poses extreme safety risks. Therefore, the authors undertook to collect the regulatory norms and proposals for preventive measures that have become necessary to reduce the phenomenon over the years. Methodology: The study collects the past aspects together with the defining events of the present. As a research method, the authors primarily use the processing of sports law and sports police literature and professional experience gained in connection with the use of pyrotechnic devices. Findings: As a result of the research, the authors make findings on the application of innovative legal, technical, technological and law enforcement tools and methods that can help football sports events be conducted even safer. Value: There has not yet been a summary study on the topic that presents the past, present and future of the use of pyrotechnic devices in one study. The summary shows a current action that will have a major impact on security issues.
APA, Harvard, Vancouver, ISO, and other styles
9

Dong, Xiao Tong, and Yi Jiang. "Study on Mechanical Materials with Overview of Connection and Separation Devices." Advanced Materials Research 788 (September 2013): 590–93. http://dx.doi.org/10.4028/www.scientific.net/amr.788.590.

Full text
Abstract:
Different kinds of mechanical materials in connection and separation devices have been widely used in spacecraft engineering and keep on innovating and improving. Pyrotechnic and non-pyrotechnic devices have their own advantages and drawbacks and the application of new materials such as SMA (shape memory alloy) and low-melting point materials has become a new and striving issue. Different kinds of connection and separation devices and their prime mechanical materials will be presented in details in this paper.
APA, Harvard, Vancouver, ISO, and other styles
10

Герасимов, С. И., В. И. Ерофеев, А. В. Зубанков, В. А. Кикеев, Е. Г. Косяк, П. Г. Кузнецов, and В. В. Писецкий. "Применение индукционных датчиков в исследованиях быстропротекающих процессов." Журнал технической физики 90, no. 8 (2020): 1374. http://dx.doi.org/10.21883/jtf.2020.08.49550.365-19.

Full text
Abstract:
When testing on a rocket track, one of the most difficult problems is the system for controlling and launching pyrotechnic devices at a given coordinate. The way of start-up and device for its implementation, is intended to provide actuation of pyrotechnic means during acceleration of the rocket trains on the rails rocket catapult track to hypersonic speeds with ejection test subject in free flight. The method is based on the principle of generating current pulses for triggering pyrotechnic devices of moving stages of a rocket train using induction sensors. The same principle makes it possible to implement a non-contact method for starting recording systems and a device for measuring the average speed of a thrown object in continuous media. The method is based on the principle of generating triggering signals (rectangular pulses of positive polarity) for starting the recording equipment with synchronization of the launch along the path in a given coordinate and measuring the speed of the object being thrown at the time of its passage through the measuring section. The methods of starting recording systems and the results obtained as a result of hydrodynamic and terradynamic experiments are presented.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Pyrotechnic devices"

1

Marshall, N. S. "Active control of passive safety in passenger motor vehicles : a feasibility study investigating dynamic denting of members using pyrotechnic devices." Master's thesis, University of Cape Town, 1995. http://hdl.handle.net/11427/22084.

Full text
Abstract:
This report describes a feasibility study investigating dynamic denting of members using pyrotechnic devices to engineer favourable energy absorption characteristics into thin walled tubes. A tube of sufficiently low slenderness ratio and wall thickness, when loaded axially to failure, will collapse in the progressive buckling mode. After the ultimate buckling load has been exceeded, and as the tube continues to compress, the load oscillates between loads considerably lower than the ultimate buckling load. The object of introducing an advantageous deformation is to decrease the ultimate buckling load to a magnitude comparable with the subsequent peak loads, but at the same time avoiding a change in the buckling mode which is not advantageous. Testing was limited to thin walled square mild steel tubes. The test procedure began with a process to determine the limitations imposed on the geometric imperfections that could be achieved by the use of explosive. It was found that all the explosively induced deformations were rounded, i.e. the dents were hemi-spherical in shape. It was also found that a smooth edged round hole could be created in the centre of the dent with the use of a round, flat explosive charge. Geometric imperfections that could be induced explosively in the specimens (as well as other deformation shapes, tested for comparative purposes) were mechanically formed in the specimens. The tubes were then quasi - statically crushed to determine the energy absorption characteristics induced by the deformations. When spherical dents were induced, the deformation affected the tube beyond the immediate spherical dent and hence the distance between the plastic hinges was increased and instabilities in the crushing process were introduced. Holes (without any visible denting) decreased the distance between the plastic hinges and thus also induced instabilities. In both cases the tubes tended to skew over to one side and in extreme cases Euler buckling ensued.
APA, Harvard, Vancouver, ISO, and other styles
2

Ozkil, Altan. "Pyrotechnic device reliability." Thesis, Monterey, California. Naval Postgraduate School, 1991. http://hdl.handle.net/10945/29482.

Full text
Abstract:
Approved for public release; distribution is unlimited.
The Naval Weapons Support Center is planning to implement a bonus system to improve the reliability of pyrotechnic devices. The measure of effectiveness that they wish to use to determine how to award bonuses is the reliability of pyrotechnic devices. The data available to estimate this reliability is based on the current sampling inspection plan in which devices are tested in different environments. The models which include both dependence and independence assumptions between the outcomes of these tests are implemented and estimates of overall reliability along with 95 % lower confidence bound are obtained. The 95 % lower confidence bounds are found by bootstrapping. Using these estimates, models for making the decision to award bonuses are discussed and studied using Monte Carlo simulation.
APA, Harvard, Vancouver, ISO, and other styles
3

Ashrin, Aya. "Approche in vitro pour l'évaluation et la prédiction de la toxicité aiguë des fumées issues de fumigènes." Electronic Thesis or Diss., Paris, AgroParisTech, 2024. http://www.theses.fr/2024AGPT0013.

Full text
Abstract:
La toxicité des fumées issues de compositions pyrotechniques (fumigènes), utilisés notamment par les forces armées, est une préoccupation majeure tant pour les fabricants que pour les utilisateurs. En conséquence, une évaluation des dangers liés à l'inhalation de ces fumées (en particulier au niveau pulmonaire) doit être réalisée. Cette évaluation est jusqu'à présent réalisée via des tests expérimentaux nécessitant des essais sur animaux, qui posent des questions éthiques et qui peuvent entraîner des coûts et délais considérables. Par ailleurs, le développement de nouvelles formulations pyrotechniques exige un investissement significatif en recherche et développement avant d'atteindre des niveaux de performance et de sécurité adéquats pour la qualification et la commercialisation.Dans ce contexte, l'adoption de méthodes alternatives in vitro pour anticiper la toxicité des fumées des nouvelles formulations devient cruciale. Cela afin de diminuer le temps et les coûts des essais, tout en évaluant la toxicité potentielle dès les premières phases de R&D, orientant ainsi le développement vers des formulations moins nocives.L'objectif de cette thèse a donc été d'évaluer l'utilisation de modèles in vitro comme alternative à l'expérimentation animale pour caractériser la toxicité aiguë pulmonaire des fumées issues de fumigènes.La première partie du travail de thèse a consisté à choisir un modèle cellulaire pulmonaire à utiliser et à mettre au point. Les paramètres expérimentaux (le support de culture ou encore le débit d'exposition) pour exposer les cellules de la co-culture A549-THP1 choisie aux fumées générées par la combustion de compositions fumigènes ont été optimisés. Dans un second temps, une fois les paramètres expérimentaux définis, une campagne d'essai portant sur 12 formulations de fumigènes et 2 blancs a été menée sur le modèle cellulaire choisi : une co-culture de cellules alvéolaire A549 - THP-1 à l'interface air-liquide (ALI) a été exposée aux fumées issues de fumigènes présentant a priori des niveaux de toxicité différents dans un système de type Vitrocell® (système dynamique) simultanément à l'exposition de rats aux mêmes fumées. Le modèle in vitro s'est révélé en adéquation avec les attendus de ces premiers essais. Dans le cadre de la thèse, le potentiel in vitro cytotoxique, inflammatoire et oxydatif des fumées a été mesuré 24h après exposition. Les réponses in vitro observées ont été comparées aux données in vivo, obtenues en marge de la thèse, par la réalisation de corrélations vivo-vitro. Des corrélations ont été montrées pour les familles HC pour la viabilité et la famille X pour l'inflammation.En conclusion, nos résultats ont facilité l'établissement d'une méthodologie appropriée pour l'évaluation de la toxicité aiguë par inhalation. Ils soulignent l'importance de continuer à développer des modèles in vitro ou des batteries de tests pour cette évaluation en gardant comme objectif de s'aligner au plus près des modèles in vivo tout en conservant une approche standardisée
The toxicity of fumes from pyrotechnic devices particularly used by armed forces, is a significant concern for both manufacturers and users. Consequently, a danger assessment especially at the pulmonary level related to the inhalation of these fumes must be conducted. So far, this evaluation has been carried out via experimental tests requiring animal trials, which raise ethical concerns and can lead to substantial costs and delays. Moreover, the development of new pyrotechnic formulations demands significant investment in research and development before achieving adequate levels of performance and safety for qualification and commercialization.In this context, the adoption of alternative in vitro methods to anticipate the toxicity of fumes from new formulations becomes crucial to reduce the time and costs of trials while assessing potential toxicity from the early stages of R&D, thus guiding development towards less harmful formulations.The aim of this thesis was to evaluate the use of in vitro models as an alternative to animal experimentation to characterize the acute pulmonary toxicity of fume from pyrotechnic devices.The first part of the thesis work involved the pulmonary cell model selection, which is the A549-THP-1 co-culture, and developing the experimental parameters to expose the cells to fume generated by the combustion of pyrotechnic compositions. Culture support and exposure flow rate were optimized. Subsequently, once the experimental parameters were defined, a test campaign on 12 pyrotechnic formulations and 2 blanks was conducted on the chosen cell model: an A549-THP-1 alveolar cell co-culture at the air-liquid interface (ALI) was exposed to fume with presumably different levels of toxicity in a Vitrocell® type system (dynamic system) simultaneously with the exposure of rats to the same fume. The in vitro model proved predictive of these initial trials. As part of the thesis, the in vitro cytotoxic, inflammatory, and oxidative potential of the fumes was measured 24 hours after exposure. The in vitro responses observed were compared with in vivo data, obtained alongside the thesis, by making vivo-vitro correlations and showed concordances for the HC family viability and the X family inflammation.In conclusion, our results facilitated the establishment of an appropriate methodology for the assessment of acute inhalation toxicity. They underscore the importance of keeping on developing in vitro models or test batteries for this evaluation, with the goal of aligning as closely as possible with in vivo models while maintaining a standardized approach
APA, Harvard, Vancouver, ISO, and other styles
4

Campbell, S. C. "Development of an apparatus to help assess the sensitiveness of explosive initiating devices to manual handling forces." Thesis, London South Bank University, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.264804.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Meyerhöfer, Dietrich. "Johann Friedrich von Uffenbach. Sammler – Stifter – Wissenschaftler." Doctoral thesis, 2020. http://hdl.handle.net/21.11130/00-1735-0000-0005-13B0-E.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Pyrotechnic devices"

1

Bement, Laurence J. A manual for pyrotechnic design, development and qualification. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

NASA, Aerospace Pyrotechnic Systems Workshop (1st 1992 Houston Tex ). First NASA Aerospace Pyrotechnic Systems Workshop. Washington, D.C: National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Program, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Özkil, Altan. Pyrotechnic device reliability. Monterey, Calif: Naval Postgraduate School, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Whitaker, Lyn R. Pyrotechnic device reliability. Monterey, Calif: Naval Postgraduate School, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

United States. National Aeronautics and Space Administration. Scientific and Technical Information Program., ed. First NASA Aerospace Pyrotechnic Systems Workshop: Proceedings of a workshop sponsored by the Pyrotechnically Actuated Systems Program, Office of Safety and Mission Quality, National Aeronautics and Space Administration, Washington, D.C. and held at Lyndon B. Johnson Space Center Houston, Texas, June 9-10, 1992. [Washington, DC]: National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Program, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

L, Seeholzer Thomas, and United States. National Aeronautics and Space Administration., eds. Applications catalog of pyrotechnically actuated devices/systems. [Washington, DC]: National Aeronautics and Space Administration, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

H, Lucy M., and Langley Research Center, eds. Report on alternative devices to pyrotechnics on spacecraft. Hampton, VA: NASA Langley Research Center, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

REPORT ON ALTERNATIVE DEVICES TO PYROTECHNICS ON SPACECRAFT... NASA-TM-110470... NASA LANGLEY RESEARCH CENTE. [S.l: s.n., 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Pyrotechnic devices"

1

Bose, Ajoy K. "Distress Signalling Devices." In Military Pyrotechnics, 575–83. Boca Raton: CRC Press, 2021. http://dx.doi.org/10.1201/9781003093404-37.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Bose, Ajoy K. "Riot Control Devices/Ammunitions." In Military Pyrotechnics, 557–66. Boca Raton: CRC Press, 2021. http://dx.doi.org/10.1201/9781003093404-35.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Bose, Ajoy K. "Infrared Flare Ammunitions and Devices." In Military Pyrotechnics, 593–605. Boca Raton: CRC Press, 2021. http://dx.doi.org/10.1201/9781003093404-39.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Bose, Ajoy K. "Infrared Flare Ammunitions and Devices." In Military Pyrotechnics, 593–606. Boca Raton: CRC Press, 2021. http://dx.doi.org/10.1201/9781003093404-41.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Shi, Wenhui, Shuai Yue, and Zhonghua Du. "Research on Launch Recoil Characteristics of Aluminum Honeycomb Buffer Under Pyrotechnic Device." In Lecture Notes in Mechanical Engineering, 3709–24. Singapore: Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-99-8048-2_259.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Butterworth, Philip, and Michael Spence. "William Parnell, Supplier of Staging and Ingenious Devices, and his Role in the Entry of Elizabeth Woodville into Norwich in 1469." In Staging, Playing, Pyrotechnics and Magic: Conventions of Performance in Early English Theatre, 77–131. London: Routledge, 2021. http://dx.doi.org/10.4324/9781003195740-7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Ye, Yaokun, Feng Ding, Jianfeng Man, Nan Yan, and Weituo Li. "A New Method to Evaluate the Adaptability of Initiating Explosive Used in the Aro-Pyrotechnic Device in Deep Space." In Astrophysics and Space Science Proceedings, 587–94. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-19309-0_59.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Di Salvo, Gina M. "Devices of Virgin Martyrdom." In The Renaissance of the Saints After Reform, 137–67. Oxford University PressOxford, 2023. http://dx.doi.org/10.1093/oso/9780192865915.003.0006.

Full text
Abstract:
Abstract Chapter 5 explores how four outrageous virgin martyr plays address the problem of knowing sainthood. The Virgin Martyr (1619) by Thomas Dekker and Philip Massinger, the anonymous Two Noble Ladies (c.1619–22), The Martyr’d Soldier (c.1619–22) by Henry Shirley, and Saint Patrick for Ireland (1639) by James Shirley all feature angelic apparitions to musical accompaniment, books as apotropaic devices, and the miraculous—and often pyrotechnic—destruction of devils. And, in their formulaic production of virgin martyrdom, they use rape as a test to validate sanctity. This chapter also extends the exploration of virgin martyrdom to the Restoration stage. In that period, Matthew Medbourne and John Dryden composed new plays about SS Cecilia and Katherine, respectively, that replicated much of the repertoire of sanctity without utilizing the device of rape perfected by the earlier plays. The violent miracles of the Jacobean and Caroline virgin martyr plays function as a sort of canonization in the theatre that occurs without adjudication by theology or religious confession.
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Pyrotechnic devices"

1

Leon, David, David Bolonio, Isabel Amez, Roberto Paredes, and Blanca Castells. "LIFE-CYCLE ANALYSIS OF FIREWORKS: ENVIRONMENTAL IMPACT AND IMPROVEMENT OPPORTUNITIES." In 24th SGEM International Multidisciplinary Scientific GeoConference 24, 139–48. STEF92 Technology, 2024. https://doi.org/10.5593/sgem2024/4.1/s17.18.

Full text
Abstract:
The increasing focus on sustainability necessitates the examination of environmental impacts across all sectors, including pyrotechnics. Pollutant emissions have been extensively studied, but information on sustainability in the pyrotechnics sector is scarce. Thus, a Life Cycle Analysis (LCA) to study two widely used pyrotechnic devices: bangers and shells was carried out, in order to analyze the environmental footprint and detect points where action can be taken. Using SimaPro software and the Product Environmental Footprint (PEF) methodology, the analysis includes all the processes involved from the manufacture of the devices up to their use and end of life, including their distribution. Although the impact on climate change of the devices studied is minimal compared to other products in everyday use, the acquisition of raw materials and their distribution is the stage that contributes the most to the overall environmental impact (60%), while the use of hazardous raw materials, especially potassium perchlorate, and plastics as containers for pyrotechnic compositions, also present important environmental problems. Therefore, measures to reduce the effects of these fireworks should focus on the selection and reduction of raw materials and the elimination of plastic compounds in their designs.
APA, Harvard, Vancouver, ISO, and other styles
2

Lohvynenko, Anatolii, and Yevhen Boliubash. "Using Pyrotechnic Devices in the Development of Separation Systems for Rocket and Space Technologies." In IAF Materials and Structures Symposium, Held at the 75th International Astronautical Congress (IAC 2024), 941–49. Paris, France: International Astronautical Federation (IAF), 2024. https://doi.org/10.52202/078369-0098.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Zhang, Limei, Wei Zhang, Chuanxia Zhou, Meng Xu, Sai Ma, Gaosheng Li, and Xiaoyuan Sun. "Design and Verification of a Bidirectional Loads Bearing and Low-Impact Pyrotechnic Release Device." In 2024 International Conference on the Frontiers of Electronic, Electrical and Information Engineering (ICFEEIE), 31–35. IEEE, 2024. https://doi.org/10.1109/icfeeie64494.2024.00013.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Lee, Hobin. "Estimating Heat Losses in Pyrotechnic Devices." In 41st AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit. Reston, Virigina: American Institute of Aeronautics and Astronautics, 2005. http://dx.doi.org/10.2514/6.2005-3837.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Bement, Laurence, Herbert Multhaup, Laurence Bement, and Herbert Multhaup. "Determining functional reliability of pyrotechnic mechanical devices." In 33rd Joint Propulsion Conference and Exhibit. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1997. http://dx.doi.org/10.2514/6.1997-2698.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Dong, Haiping, Tianfei Zhang, Xia Zhao, and Xiao Dong. "Review of reliability assessment methods for pyrotechnic devices." In 2011 9th International Conference on Reliability, Maintainability and Safety (ICRMS 2011). IEEE, 2011. http://dx.doi.org/10.1109/icrms.2011.5979230.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Lavaud, Jacques, Bruno Leforgeais, and Terence Hazel. "Pyrotechnic current limiting devices — From design to operation." In 2014 Petroleum and Chemical Industry Conference Europe (PCIC Europe). IEEE, 2014. http://dx.doi.org/10.1109/pciceurope.2014.6900050.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Glass, John. "Uses and Abuses of Accelerated Age Testing of Pyrotechnic Devices." In 40th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit. Reston, Virigina: American Institute of Aeronautics and Astronautics, 2004. http://dx.doi.org/10.2514/6.2004-3419.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Dosser, Larry R., and Margaret A. Stark. "Analysis of pyrotechnic devices by laser-illuminated high-speed photography." In San Diego '90, 8-13 July, edited by Paul A. Jaanimagi, Barry T. Neyer, and Larry L. Shaw. SPIE, 1991. http://dx.doi.org/10.1117/12.23358.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

PÄÄKKÖNEN, R., and I. KYTTÄLÄ. "NOISE CONTROL OF PYROTECHNIC DEVICES USED IN LEISURE TIME ACTIVITIES." In Inter-Noise 1996. Institute of Acoustics, 2024. http://dx.doi.org/10.25144/19746.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Pyrotechnic devices"

1

Clausen, Jay L., Julie Richardson, Nic Korte, Nancy Perron, Susan Taylor, Anthony Bednar, Patricia Tuminello, William Jones, Shawna Tazik, and Michael Walsh. Metal Residue Deposition from Military Pyrotechnic Devices and Field Sampling Guidance. Fort Belvoir, VA: Defense Technical Information Center, May 2012. http://dx.doi.org/10.21236/ada562327.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Pyrotechnic devices' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography