Journal articles on the topic 'Purdue University. Laboratory for Applications of Remote Sensing'

On 1 October 2004, the most ambitious high-performance Grid project in the United States—the TeraGrid—became fully operational. Resources at nine sites—the San Diego Supercomputer Center, the California Institute of Technology, the National Center for Supercomputing Applications, the University of Chicago/Argonne National Laboratory, Pittsburgh Supercomputing Center, Texas Advanced Computing Center, Purdue University, Indiana University and Oak Ridge National Laboratory—were joined via an ultra-fast optical network, unified policies and security procedures and a sophisticated distributed computing software environment. Funded by the National Science Foundation, the TeraGrid enables scientists and engineers to combine distributed, multiple data sources with computation at any of the sites or link massively parallel computer simulations to extreme-resolution visualizations at remote sites. A single shared utility lets multiple resources be easily leveraged and provides improved access to advanced computational capabilities. One of the demonstrations of this new model for using distributed resources, Teragyroid, linked the infrastructure of the TeraGrid with computing resources in the United Kingdom via a transatlantic data fibre link. Once connected, the software framework of the RealityGrid project was used to successfully explore lattice-Boltzmann simulations involving lattices of over one billion sites.

Abstract. Time series (TS) analysis has always been an important topic in Remote Sensing (RS). Open access to archives of Earth Observation missions, periodically acquired nation-wide aerial imagery and LiDAR point clouds, and various research datasets, together with open tools for TS data processing, have brought new possibilities in RS research but also challenges in education. The topic of TS analysis in RS has become an essential part of MSc curricula in geoinformatics, geography, and related fields. Open learning materials systematically addressing the issue of TS at the master's level are rare and their development is time and resource demanding. Thus, based on previous collaboration, the four research groups from Charles University, Heidelberg University, University of Innsbruck, and University of Warsaw joint their specific expertise and developed an open E-learning course on Time Series Analysis in RS for Understanding Human-Environment Interactions (E-TRAINEE). The course consists of four Modules covering the topics of TS from general approaches (M1) to specific methods of processing TS of satellite multispectral images (M2), 3D/4D point clouds (M3), and aerial image and laboratory spectroscopy (M4). Theoretical parts are supported with exercises/tutorials and case studies based on research activities of the involved teams. The course is accessible via a web site and is published under the CC-BY SA 4.0 license. The primary target group are MSc and PhD students of geoinformatics and geography, but it is also relevant to students of environmental studies, ecology, or geology, as well as potential users from the public and private sectors dealing with applications of RS.

Nowadays the imagery data acquired from UAV sensors are the main source of all data used in various remote sensing applications, photogrammetry projects and in imagery intelligence (IMINT) as well as in other tasks as decision support. Therefore quality assessment of such imagery is an important task. The research team from Military University of Technology, Faculty of Civil Engineering and Geodesy, Geodesy Institute, Department of Remote Sensing and Photogrammetry has designed and prepared special test field- The Portable Imagery Quality Assessment Test Field (PIQuAT) that provides quality assessment in field conditions of images obtained with sensors mounted on UAVs. The PIQuAT consists of 6 individual segments, when combined allow for determine radiometric, spectral and spatial resolution of images acquired from UAVs. All segments of the PIQuAT can be used together in various configurations or independently. All elements of The Portable Imagery Quality Assessment Test Field were tested in laboratory conditions in terms of their radiometry and spectral reflectance characteristics.

Geo-information technology plays a critical role in urban planning and management, land resource quantification, natural disaster risk and damage assessment, smart city development, land cover change modeling and touristic flow management. In particular, the development of big data mining and machine learning techniques (including deep learning) in recent years has expanded the potential applications of geo-information technology and promoted innovation in approaches to mining in different fields. In this context, the International Conference on Geo-Information Technology and its Applications (ICGITA 2019) was held in Nanchang, Jiangxi, China, 11–13 October 2019, co-organized by the Key Laboratory of Digital Land and Resources, East China University of Technology, the Institute of Remote Sensing and Digital Earth (RADI) of the Chinese Academy of Sciences (CAS), which was renamed in 2017 the Aerospace Information Research Institute (AIR), CAS, and the Institute of Space and Earth Information Science of the Chinese University of Hong Kong. The outstanding papers presented at this event and some other original articles were collected and published in this Special Issue “Geo-Information Technology and Its Applications” in the International Journal of Geo-Information. This Special Issue consists of 14 high-quality and innovative articles that explore and discuss the typical applications of geo-information technology in the above-mentioned domains.

AbstractBidirectional reflectance of a surface is defined as the ratio of the scattered radiation at the detector to the incident irradiance as a function of geometry. Accurate knowledge of the bidirectional reflection function for layers composed of discrete, randomly positioned scattering particles is essential for many remote sensing, engineering, and biophysical applications, as well as for different areas of astrophysics. Computations of bidirectional reflection functions for plane parallel particulate layers are usually reduced to solving the radiative transfer equation by the existing techniques. In this work we present our laboratory data on bidirectional reflectance versus phase angle for two sample sizes of alumina, 0.3 and 1 μm, for the He–Ne laser at wavelengths of 632.8 nm (red) and 543.5 nm (green). The nature of the phase curves of the asteroids depends on the parameters like particle size, composition, porosity, roughness, etc. In the present study we analyze data which are being generated using a single scattering phase function, that is, Mie theory of treating particles as a compact sphere. The well-known Hapke formula, along with different particle phase functions such as Mie and Henyey–Greenstein, will be used to model the laboratory data obtained at the asteroid laboratory of Assam University.

Abstract. Synthetic aperture radar (SAR) system based on frequency modulated continuous wave (FM-CW) transmission is a viable option for producing high-resolution ground-based imaging radars. Compared with pulsed SAR systems, the combination of FM-CW technology and SAR processing techniques have the advantages of small cubage, lightweight, cost-effectiveness, and high resolution in the SAR image. These characteristics make FM-CW SAR suitable to be deployed as payload on ground Based SARs (GB-SARs) for environmental and civilian applications. In this paper, the Range Migration Algorithm (RMA) is used in the processing chain of a Ground-Based SAR (GB-SAR) sensor. The mentioned sensor has been developed in Microwave Remote Sensing Laboratory (MReSL) at the School of Surveying and Geospatial Engineering, the University of Tehran for the generation of a complex image from the raw signal. The raw signal is acquired with that sensor working at S-band, frequency modulating from 2.26 GHz to 2.59 GHz.

In the field of remote sensing, most of the feature indexes are obtained based on expert knowledge or domain analysis. With the rapid development of machine learning and artificial intelligence, this method is time-consuming and lacks flexibility, and the indexes obtained cannot be applied to all areas. In order to not rely on expert knowledge and find the effective feature index with regard to a certain material automatically, this paper proposes a data-driven method to learn interactive features for hyperspectral remotely sensed data based on a sparse multiclass logistic regression model. The key point explicitly expresses the interaction relationship between original features as new features by multiplication or division operation in the logistic regression. Through the strong constraint of the L1 norm, the learned features are sparse. The coefficient value of the corresponding features after sparse represents the basis for judging the importance of the features, and the optimal interactive features among the original features. This expression is inspired by the phenomenon that usually the famous indexes we used in remote sensing, like NDVI, NDWI, are the ratio between different spectral bands, and also in statistical regression, the relationship between features is captured by feature value multiplication. Experiments were conducted on three hyperspectral data sets of Pavia Center, Washington DC Mall, and Pavia University. The results for binary classification show that the method can extract the NDVI and NDWI autonomously, and a new type of metal index is proposed in the Pavia University data set. This framework is more flexible and creative than the traditional method based on laboratory research to obtain the key feature and feature interaction index for hyperspectral remotely sensed data.

Integrating the representation of the territory, through airborne remote sensing activities with hyperspectral and visible sensors, and managing complex data through dimensionality reduction for the identification of cannabis plantations, in Albania, is the focus of the research proposed by the multidisciplinary group of the Benecon University Consortium. In this study, principal components analysis (PCA) was used to remove redundant spectral information from multiband datasets. This makes it easier to identify the most prevalent spectral characteristics in most bands and those that are specific to only a few bands. The survey and airborne monitoring by hyperspectral sensors is carried out with an Itres CASI 1500 sensor owned by Benecon, characterized by a spectral range of 380–1050 nm and 288 configurable channels. The spectral configuration adopted for the research was developed specifically to maximize the spectral separability of cannabis. The ground resolution of the georeferenced cartographic data varies according to the flight planning, inserted in the aerial platform of an Italian Guardia di Finanza’s aircraft, in relation to the orography of the sites under investigation. The geodatabase, wherein the processing of hyperspectral and visible images converge, contains ancillary data such as digital aeronautical maps, digital terrain models, color orthophoto, topographic data and in any case a significant amount of data so that they can be processed synergistically. The goal is to create maps and predictive scenarios, through the application of the spectral angle mapper algorithm, of the cannabis plantations scattered throughout the area. The protocol consists of comparing the spectral data acquired with the CASI1500 airborne sensor and the spectral signature of the cannabis leaves that have been acquired in the laboratory with ASD Fieldspec PRO FR spectrometers. These scientific studies have demonstrated how it is possible to achieve ex ante control of the evolution of the phenomenon itself for monitoring the cultivation of cannabis plantations.

Integrating the representation of the territory, through airborne remote sensing activities with hyperspectral and visible sensors, and managing complex data through dimensionality reduction for the identification of cannabis plantations, in Albania, is the focus of the research proposed by the multidisciplinary group of the Benecon University Consortium. In this study, principal components analysis (PCA) was used to remove redundant spectral information from multiband datasets. This makes it easier to identify the most prevalent spectral characteristics in most bands and those that are specific to only a few bands. The survey and airborne monitoring by hyperspectral sensors is carried out with an Itres CASI 1500 sensor owned by Benecon, characterized by a spectral range of 380–1050 nm and 288 configurable channels. The spectral configuration adopted for the research was developed specifically to maximize the spectral separability of cannabis. The ground resolution of the georeferenced cartographic data varies according to the flight planning, inserted in the aerial platform of an Italian Guardia di Finanza’s aircraft, in relation to the orography of the sites under investigation. The geodatabase, wherein the processing of hyperspectral and visible images converge, contains ancillary data such as digital aeronautical maps, digital terrain models, color orthophoto, topographic data and in any case a significant amount of data so that they can be processed synergistically. The goal is to create maps and predictive scenarios, through the application of the spectral angle mapper algorithm, of the cannabis plantations scattered throughout the area. The protocol consists of comparing the spectral data acquired with the CASI1500 airborne sensor and the spectral signature of the cannabis leaves that have been acquired in the laboratory with ASD Fieldspec PRO FR spectrometers. These scientific studies have demonstrated how it is possible to achieve ex ante control of the evolution of the phenomenon itself for monitoring the cultivation of cannabis plantations.

The study aims to assess the rate of erosion that occurred in Manjunto Watershed and financial loss using Geographic Information System and Remote Sensing. Model used to determine the erosion is E30 models. The basis for the development of this model is to integrate with the slope of the slope between NDVI. The value of NDVI obtained from satellite imagery. Slope factor obtained through the DEM processing. To determine the amount of economic losses caused by erosion used the shadow prices. The amount of nutrients lost converted to fertilizer price. The results showed that the eroded catchment area has increased significantly. The rate of average annual erosion in the watershed Manjunto in 2000 amounted to 3 Mg ha-1 yr-1. The average erosion rate in the watershed Manjunto annual increase to 27 Mg ha-1 yr-1 in the year 2009. Economic losses due to erosion in 2009 was Rp200,000,- for one hectare. Total losses due to erosion for the total watershed area is Rp15,918,213,133, -. The main factor causing the high rate of erosion is high rainfall, slope and how to grow crops that do not pay attention to the rules of conservation.Keywords: Soil erosion, digital elevation model, GIS, remote sensing, valuation erosion[How to Cite: Gunawan G, D Sutjiningsih, H Soeryantono and S Widjanarko. 2013.Soil Erosion Prediction Using GIS and Remote Sensing on Manjunto Watershed Bengkulu-Indonesia. J Trop Soils 18 (2): 141-148. Doi: 10.5400/jts.2013.18.2.141][Permalink/DOI: www.dx.doi.org/10.5400/jts.2013.18.2.141]REFERENCESAksoy E, G Ozsoy and MS Dirim. 2009. Soil mapping approach in GIS using Landsat satellite imagery and DEM data. Afr J Agric Res 4: 1295-1302.Ananda J and G Herath. 2003. Soil erosion in developing countries: a socio-economic appraisal. J Environ Manage 68: 343-353.Ananda J, G Herath and A Chisholm. 2001. Determination of yield and Erosion Damage Functions Using Subjectivly Elicited Data: application to Smallholder Tea in Sri Lanka. Aust J Agric Resour Ec 45: 275-289.Ande OT, Y Alaga and GA Oluwatosin. 2009. Soil erosion prediction using MMF model on highly dissected hilly terrain of Ekiti environs in southwestern Nigeria. Int J Phys Sci 4: 053-057.Arnold JG, BA Engel and R Srinivasan. 1998. A continuous time grid cell watershed model. Proc. of application of Advanced Technology for management of Natural Resources.Arsyad S. 2010. Konservasi Tanah dan Air. IPB Press. Bogor-Indonesia (in Indonesian).Asdak C.1995. Hydrology and Watershed Management. Gadjah Mada University Press, Yogyakarta.Barlin RD and ID Moore. 1994. Role of buffer strips in management of waterway pollution: a review. Environ Manage 18: 543-58.Brough PA.1986. Principle of Geographical Information Systems For Land Resources Assessment. Oxford University Press, 194p.Clark B and J Wallace. 2003. Global connections: Canadian and world issues. Toronto, Canada: Pearson Education Canada, Inc.Cochrane T A and DC Flanagan. 1999. Assessing water erosion in small watershed using WEPP with GIS and digital elevation models. J Soil Water Conserv 54: 678 685.Dames TWg. 1955. The Soils of East Central Java; with a Soil Map 1:250,000. Balai Besar Penjelidikan Pertanian, Bogor, Indonesia.Dixon JA, LF Scura, RA Carpenter and PB Sherman. 2004. Economic Analysis of Environmental Impacts 2nd ed. Eartscans Publication Ltd., London.Fistikoglu O and NB Harmancioglu. 2002. Integration of GIS with USLE in Assessment of Soil Erosion. Water Resour Manage 16: 447-467.Green K. 1992. Spatial imagery and GIS: integrated data for natural resource management. J Forest 90: 32-36.Hazarika MK and H Honda. 2001. Estimation of Soil Erosion Using Remote Sensing and GIS, Its Valuation & Economic Implications on Agricultural Productions. The 10th International Soil Conservation Organization Meeting at Purdue University and the USDA-ARS Soil Erosion Research Laboratory.Hazarika S, R Parkinson, R Bol, L Dixon, P Russell, S Donovan and D Allen. 2009. Effect of tillage system and straw management on organic matter dynamics. Agron Sustain Develop 29: 525-533. doi: 10.1051/agro/2009024. Honda KL, A Samarakoon, Y Ishibashi, Mabuchi and S Miyajima.1996. Remote Sensing and GIS technologies for denudation estimation in Siwalik watershed of Nepal,p. B21-B26. Proc. 17th Asian Conference on Remote Sensing, Colombo, Sri lanka.Kefi M and K Yoshino. 2010. Evaluation of The Economic Effects of Soil Erosion Risk on Agricultural Productivity Using Remote Sensing: Case of Watershed in Tunisia. International Archives of the Photogrammetry, Remote Sensing and Spatial Information Science, Volume XXXVIII, Part 8, Kyoto Japan.Kefi M, K Yoshino, K Zayani and H Isoda. 2009. Estimation of soil loss by using combination of Erosion Model and GIS: case of study watersheds in Tunisia. J Arid Land Stud 19: 287-290.Lal R. 1998. Soil erosion impact on agronomic productivity and environment quality: Critical Review. Plant Sci 17: 319-464.Lal. 2001. Soil Degradation by Erosion. Land Degrad Develop12: 519-539.Lanya I. 1996. Evaluasi Kualitas lahan dan Produktivitas Lahan Kering Terdegradasi di Daerah Transmigrasi WPP VII Rengat Kabupaten Indragiri Hulu, Riau. [Disertasi Doktor]. Program Pasca Sarjana IPB, Bogor (in Indonesian).Mermut AR and H Eswaran. 2001. Some major developments in soil science since the mid 1960s. Geoderma 100: 403-426.Mongkolsawat C, P Thurangoon and Sriwongsa.1994. Soil erosion mapping with USLE and GIS. Proc. Asian Conf. Rem. Sens., C-1-1 to C-1-6.Morgan RPC, Morgan DDV and Finney HJ. 1984. A predictive model for the assessment of erosion risk. J Agric Eng Res 30: 245-253.Morgan RPC. 2005. Soil Erosion and Conservation. 3rd ed. Malden, MA: Blackwell Publishing Co.Panuju DR, F Heidina, BH Trisasongko, B Tjahjono, A Kasno, AHA Syafril. 2009. Variasi nilai indeks vegetasi MODIS pada siklus pertumbuhan padi. J.Ilmiah Geomat. 15, 9-16 (in Indonesian).Pimentel D, C Harvey, P Resosudarmo, K. Sinclair, D Kurz, M Mc Nair, S Christ, L Shpritz, L Fitton, R Saffouri and R Balir. 1995. Environmental and Economic Costs of Soil Erosion and Conservation Benefits. Science 267: 1117-1123.Saha SK and LM Pande. 1993. Integrated approach towards soil erosion inventory for environmental conservation using satellite and agrometeorological data. Asia Pac Rem Sens J 5: 21-28.Saha SK, Kudrat M and Bhan SK.1991. Erosional soil loss prediction using digital satellitee data and USLE. In: S Murai (ed). Applications of Remote Sensing in Asia and Oceania – Environmental Change Monitoring. Asian Association of Remote Sensing, pp. 369-372.Salehi MH, Eghbal MK and Khademi H. 2003. Comparison of soil variability in a detailed and a reconnaissance soil map in central Iran. Geoderma 111: 45-56.Soil Survey Staff. 1998. Keys to Soil Taxonomy. Eighth Edition. United States Department of Agriculture Natural Resources Conservation Service. Washington, D.C.

Abstract Remote sensing methods, for example, photogrammetry and laser scanning can be employed to scan rock masses by digitizing underground spaces or slopes. To reconstruct a 3D model by photogrammetry, plenty of photos should be captured. This process is time-consuming and can be dangerous when the rock mass is unstable. Therefore, rapid capturing methods are needed to reduce the acquisition time. This can be achieved with LiDAR scanners that capture a 3D point cloud with a high-speed pulsed laser beam. However, the cost of laser scanners is high, which limits their usability. Apple’s iPhone 12 Pro Max smartphone is equipped with a LiDAR sensor and is much cheaper than conventional laser scanners. Several mobile applications for 3D models using the smartphone Lidar have been developed, making the scanning process easy. Therefore, smartphones can be used for rapid scanning of unstable surfaces of tunnels and slopes. In this study, 3D point clouds (3DPC) of a tunnel wall of the Underground Research Laboratory of Aalto University (URLA) are obtained by a high-resolution digital camera and smartphone LiDAR. The models are analyzed and compared. The results show the quality of the smartphone LiDAR sensor is adequate for generating 3D models of underground spaces.

<p><strong>Abstract.</strong> A Smart City is based on intelligent exchanges of information that flow between its many different subsystems. This flow of information is analyzed and translated into citizen and commercial services. The city will act on this information flow to make its wider ecosystem more resource-efficient and sustainable. The information exchange is based on a smart governance operating framework designed to make cities sustainable.</p><p>The public administration needs updated and reliable geospatial data which depicts the urban environment. These data can be obtained through smart devices (smartphones, e.g.), human agents (collaborative mapping) and remote sensing technologies, such as UAV (Unnamed Aerial Vehicles). According to some authors, there are four dimensions in a Smart City. The first dimension concerns the application of a wide range of electronic and digital technologies to create a cyber, digital, wired, informational or knowledge-based city; the second is the use of information technology to transform life and work; the third is to embed ICT (Information and Communication Technology) in the city infrastructure; the fourth is to bring ICT and people together to enhance innovation, learning, and knowledge. Analyzing these dimensions, it is possible to say that in all of them the geospatial information is crucial, otherwise, none of them are possible. Considering these aspects, this research intends to use the Smart City concept as a methodological approach using the UFPR (Federal University of Parana) as a target to develop a case study.</p><p>The UFPR has 26 campus in different cities of the Paraná State, south of Brazil. Its structure has 14 institutes. It comprises 11 million square meters of area, 500,000 square meters of constructed area and 316 buildings. There are more than 6,300 employees (staff and administration), 50,000 undergraduate students and 10,000 graduate students. Besides these figures, there are external people who need access to the UFPR facilities, such as deliveries, service providers and the community in general.</p><p>The lack of knowledge about the space and its characteristics has a direct impact on issues such as resources management (human and material), campi infrastructure (outside and inside of the buildings), security and other activities which can be supported using an updated geospatial database. In 2014, the UFPR CampusMap project was started with the indoor mapping as the main goal. However, the base map of the campus was needed in order to support the indoor mapping, the available one was produced in 2000. Thereafter, the campus Centro Politécnico (located in the city of Curitiba) is being used as a case study to develop methodologies to create a geospatial database which will allows to different users the knowledge and management of the space.</p><p>According to Gruen (2013), a Smart City must have spatial intelligence. Moreover, it is necessary the establishment of a database, in particular, a geospatial database. The knowledge of the space where the events happen is a key element in this context. This author also states that to achieve this objective are necessary the following items:</p> <ul><li>Automatic or semi-automated Digital Surface Models (DSM) generation from satellite, aerial and terrestrialimages and/or LiDAR data;</li><li>Further development of the semi-automated techniques onto a higher level of automation; </li><li>Integrated automated and semi-automated processing of LiDAR point clouds and images, both from aerial andterrestrial platforms; </li><li>Streamlining the processing pipeline for UAV image data projects; </li><li>Set-up of GIS with 3D/4D capabilities; </li><li>Change detection and databases updating; </li><li>Handling of dynamic and semantic aspects of city modeling and simulation. This leads to 4D city models; </li><li>LBS (Location Based Services) system investigations (PDAs, mobiles); and </li><li>Establishment of a powerful visualization and interaction platform.</li></ul><p>Some of these aspects are being addressed in this research. The first one is the integration of indoor/outdoor data to helps the space management and provides a tool for navigation between the spaces. The base map was updated through a stereo mapping compilation from images collected using a UAV Phantom 4 from DJI (https://www.dji.com/phantom-4). The use of this technology for data acquisition is not only faster but also cheaper compared to the traditional photogrammetric method. Besides the quality of the images (in this case a GSD – Ground Sample Distance – of 2,5 cm), it can be use in urban areas as a rapid response in emergency situations.</p><p> To georreferencing the image block, it was used 50 control points collected by GNSS (Global Navigation Satellite System) and the software Agisoft Photoscan (http://www.agisoft.com/) to perform the bundle block adjustment with self-calibration. After the processing, the exterior orientation parameters of image block and the tridimensional coordinates of each tie point were calculated simultaneously with the determination of the interior orientation parameters: focal length (f), principal point coordinates (x0, y0), radial symmetric (k1, k2, k3) and decentering distortion coefficients (p1, p2).</p><p> In the mapping production step, the features were extracted through stereo mapping compilation accordingly the standards defined by the Brazilian Mapping Agency. The several layers were edited in GIS software (QGIS) and then the topology was built. Afterward, it was created a spatial database using Postgre/PostGIS. Also, the dense point cloud was generated using SfM (Structure from Motion) algorithms to allow to generate the digital surface model and orthomosaics.</p><p> Meanwhile, a website using HTML5+CSS3&amp;reg; and JavaScript&amp;reg; technologies was developed to publish the results and the first applications. (www.campusmap.ufpr.br). The architecture of this application uses JavaScript&amp;reg;, LeafLet, PgRouting library (to calculate the routes between interest points), files in GeoJson format and custom applications. The indoor database comprises the data about the interior of the buildings and provides to the user some functionalities such as: search for rooms, laboratories, and buildings; routes between points (inside and outside the buildings), floor change. Also, some web applications were developed in order to demonstrate the capabilities of the use of geospatial information in an environment very similar to a city and its problems, e.g. parking management, security, logistics, resources inventory, among others. It was developed a mobile application to provide the indoor user positioning through Wi-Fi (Wireless Fidelity) networks. This, combined with the indoor mapping, will allow the users to navigate in real time inside the buildings. Using the data from the point cloud and the CityGML standard it was developed a 3D model of some buildings. An application to inform crime occurrences (such as robbery, assaults) was also developed so these occurrences can be mapped, and the administration can increase the security of the campus.</p><ol type="a"> <li>Design an interface with functionalities to integrate all applications which are being presented in individual Webpages;</li><li>Develop a visualization tool for 3D models using CityGML;</li><li>Evaluate the potential of UAV images for different applications in urban scenarios;</li><li>Develop an interface for collaborative database update.</li><li>Expand the database to other campus of UFPR and develop new functionalities to different users;</li></ol><p> The “smart city” concept allows to develop an optimized system that use geospatial data to understand the complexity of the urban environments. The use of the geospatial data can improve efficiency and security to manage urban aspects like infrastructure, building and public spaces, natural environment, urban services, health and education. Also, this concept can give a support to the city management agents during the design, realization and evaluation of the urban projects.</p><p>In the present project, we believe these are the first steps to build a connected environment and apply the “smart city” concept into the university administration to make the sustainable use of resources and could suit as an example to some existing problems in public administrations.</p>

The purpose of research to determine and contribute in more efficient services to geoinformation stakeholders, as well as to give positive impact on increasing income in geo business sector, voluntary based web system for online usage of geoinformation in Kosovo has been developed. The method used was puting in to one place many sourcec via WMS and WFS services, by creating thematic SDI, in order to have online system with dynamic data comming from official databases with update from last day on 5 pm. System is open for usage by all interested parts, however official registration is required. It contains geoinformation from many databases such as cadastral, orthophoto, municipal, and basemaps from open layers. The results show that the system is extendable and it is permanently including new datasets based on the user requirements. All available data is linked via web services, which gives an opportunity to users to use the updated version of datasets as they are published by responsible institution via www (world wide web). Keywords: web map, geoportal, geoinformation, web services, Kosovo References Alameh. N, (2010). Service chaining of interoperable Geographic Information Web Services. Global Science and Technology. Greenbelt, USA. Brimicombe, A.J. (2002). GIS-where are the frontiers now. GIS 2002. Bahrain. Bryukhanova, E. A., Krupochkin, Y. P., & Rygalova, M. V. (2018). Geoinformation technologies in the reconstruction of the social space of siberian cities at the turn of the 19–20th centuries (case study of the city of tobolsk). Journal of Siberian Federal University - Humanities and Social Sciences, 11(8), 1229-1242. doi:10.17516/1997-1370-0303 Chaudhuri, S. (2015). Application of Web Based Geographical Information Systems in e-business. Maldives. Davis, C.A. and Alves L.L. (2007). Geospatial web services, Vicosa, Brazil. ESRI. (2003). Spatial Data Standards and GIS interoperability. White paper. ESRI. CA. USA. Ferdousi, . and Al-Faisal, A. (2018). Urban and regional planning. Rajshahi University of Engineering and Technology. Rajshahi. Bangladesh. Gitis, V., Derendyaev, A., & Weinstock, A. (2016). Web-based GIS technologies for monitoring and analysis of spatio-temporal processes. International Journal of Web Information Systems, 12(1), 102-124. doi:10.1108/IJWIS-10-2015-0032 Glasze, G., & Perkins, C. (2015). Social and political dimensions of the OpenStreetMap project: Towards a critical geographical research agenda doi:10.1007/978-3-319-14280-7_8 Henzen, C. (2018). Building a framework of usability patterns for web applications in spatial data infrastructures. ISPRS International Journal of Geo-Information, 7(11) doi:10.3390/ijgi7110446 Idrizi, B. (2009). Developing of National Spatial Data Infrastructure of Macedonia according to global standardization (GSDI and INSPIRE) and local status. Conference of Nikodinovski. Skopje. Macedonia. Idrizi, B. (2018). General Conditions of Spatial Data Infrastructure. International Journal on Natural and Engineering Sciences. Turkey. Idrizi, B. Sulejmani, V. Zimeri, Z. (2018). Multi-scale map for three levels of spatial planning data sets for the municipality of Vitia in Kosova. 7th ICC&GIS conference. Sozopol. Bulgaria. Mwange, C., Mulaku, G. C., & Siriba, D. N. (2018). Reviewing the status of national spatial data infrastructures in africa. Survey Review, 50(360), 191-200. doi:10.1080/00396265.2016.1259720 Nikolov, B. P., Zharkikh, J. I., Soloviev, A. A., Krasnoperov, R. I., & Agayan, S. M. (2015). Integration of data mining methods for earth science data analysis in GIS environment. Russian Journal of Earth Sciences, 15(4) doi:10.2205/2015ES000559 Sahin, K. and Gumusay, M.U. (2008). Service oriented architecture based web services for geographic information systems. The international archives of the remote sensing, photogrammetry and spatial information sciences. Vol XXXVII. Beijing. China. Sayar, A. (2008). GIS service oriented architecture. Community grids laboratory. IN, USA. Shi, S. (2015). Design and development of an online geoinformation service delivery of geospatial models in the united kingdom. Environmental Earth Sciences, 74(10), 7069-7080. doi:10.1007/s12665-015-4243-8 Siles, G., Charland, A., Voirin, Y., & Bénié, G. B. (2019). Integration of landscape and structure indicators into a web-based geoinformation system for assessing wetlands status. Ecological Informatics, 52, 166-176. doi:10.1016/j.ecoinf.2019.05.011 Ummadi, P. (2008). Standards and Interoperability in GIS, Michigan State University. MI, USA. Vorobev, A. V., & Shakirova, G. R. (2016). Web-based geoinformation system for exploring geomagnetic field, its variations and anomalies doi:10.1007/978-3-319-29589-3_2 Walter, V., & Sörgel, U. (2018). Implementation, results, and problems of paid crowd-based geospatial data collection. PFG - Journal of Photogrammetry, Remote Sensing and Geoinformation Science, 86(3-4), 187-197. doi:10.1007/s41064-018-0058-z Copyright (c) 2019 Geosfera Indonesia Journal and Department of Geography Education, University of Jember This work is licensed under a Creative Commons Attribution-Share A like 4.0 International License

Though disparate locations, outer space and the oil field have much more in common than one might think. Both can be taxing on operations and often redefine the idea of an isolated and, at times, hostile work environment. Harsh atmospheric conditions and wide-ranging pressure regimes call for unique technological applications and operations to achieve the best performance and results, whether it’s the gravitational and meteorological challenges of another planet or the crushing pressures and changing meta-ocean conditions of the deep offshore. Despite the obvious differences, operating in both the terran oil field and the blackness of space offer hurdles that can be cleared by similar means. Shared technologies between the two industries have been around for decades and center around disciplines like automation, robotics, and remote sensing. The National Aeronautics and Space Administration (NASA) itself has dabbled in oilfield studies, especially when it comes to greenhouse gas emissions and their impact on the atmosphere. In 2021, the agency’s Jet Propulsion Laboratory, along with the University of Arizona and Arizona State University, completed a study to identify methane super-emitters in the Permian Basin. The month-long, airborne study concluded that fixing the worst leaks identified in the area’s infrastructure could cut methane emissions by 55 tons an hour, equivalent to 5.5% of the US Environmental Protection Agency’s estimates of all methane emissions from hydrocarbon production across the entire US. The study pointed to malfunctioning equipment as the likely culprit for the 123 sources found. Conversely, NASA has also tapped into oilfield technology for some of its planned drilling operations on the moon. It will be the first such operation on any planetary body outside of the Earth. One of the earliest directives of NASA’s Artemis program is to try and find water near the lunar South Pole. Polar Resources Ice Mining Experiment-1 (PRIME-1) will be the first in-situ resource utilization demonstration on the moon. For the first time, NASA will robotically sample and analyze for ice from below the surface. PRIME-1 will use TRIDENT (The Regolith and Ice Drill for Exploring New Terrain) to drill in a single location at a site with a high likelihood of having water, whether in liquid or ice form. TRIDENT was developed and supplied by Honeybee Robotics, which also supplies geotechnical tools and sensors, among other tech, to the oil patch. The system, to be integrated into VIPER, NASA’s first robotic moon rover, will drill about a meter below the surface, each time bringing up samples that NASA will analyze with a mass spectrometer. The launch of the NOVA-C, which carries the PRIME-1, was previously delayed. At press time, the payload was due to blast off on board Space X’s Falcon 9 rocket in early 2024. NASA said in October the VIPER will reach its destination at Mons Mouton near the lunar South Pole in November 2024.

In 2013 the Editor of Journal of Vibration and Control and SAGE became aware of a peer review ring involving assumed and fabricated identities that appeared to centre around Peter Chen at National Pingtung University of Education, Taiwan (NPUE). SAGE and the Editor then began a complex investigation into the case during the rest of 2013 and 2014. Following an unsatisfactory response from Peter Chen, NPUE was notified. NPUE were serious in addressing the Journal and SAGE’s concerns. NPUE confirmed that the institution was investigating Peter Chen. SAGE subsequently uncovered a citation ring involving the above mentioned author and others. We regret that individual authors have compromised the academic record by perverting the peer review process and apologise to readers. On uncovering problems with peer review and citation SAGE immediately put steps in place to avoid similar vulnerability of the Journal to exploitation in the future. More information may be found at www.sagepub.co.uk/JVC_Statement_2014 . The Journal and SAGE understand from NPUE that Peter Chen has resigned his post at NPUE. The following articles are retracted because after thorough investigation evidence points towards them having at least one author or being reviewed by at least one reviewer who has been implicated in the peer review ring and/or citation ring. All authors have had an opportunity to respond to the allegations and proposed actions. OnlineFirst articles (these articles will not be published in an issue) Chen CY, Chen T-H, Chen Y-H, Yu S-E and Chung P-Y (2013) Information technology system modeling an integrated C-TAM-TPB model to the validation of ocean tidal analyses Journal of Vibration and Control Epub ahead of print 7 May 2013. doi: 10.1177/1077546312472924 Chang R-F, Chen CY, Su F-P and Lin H-C (2013) A two-step approach for broadband digital signal processing technique Journal of Vibration and Control Epub ahead of print 26 April 2013. doi: 10.1177/1077546312472925 Chen TH, Chang CJ, Yu SE, Chung PY and Liu C-K (2013) Nonlinear information analysis and system management technique: the influence of design experience and control complexity Journal of Vibration and Control Epub ahead of print 12 April 2013. doi: 10.1177/1077546312473321 Chen CY, Shih BY, Chen YH, Yu SE and Liu YC (2013) The exploration of a 3T flow model using vibrating NXT: II. Model validation Journal of Vibration and Control Epub ahead of print 10 April 2013. doi: 10.1177/1077546312470481 Chen CY, Shih BY, Chen YH, Yu SE and Liu YC (2013) The exploration of 3T flow model using vibrating NXT: I. model formulation Journal of Vibration and Control Epub ahead of print 6 February 2013. doi: 10.1177/1077546312467360 Lin M-L and Chen C-W (2013) Stability analysis of fuzzy-based NN modeling for ecosystems using fuzzy Lyapunov methods Journal of Vibration and Control Epub ahead of print 6 February 2013. doi: 10.1177/1077546312466687 Chen CY, Chen TH, Chen YH and Chiu J (2012) A multi-stage method for deterministic-statistical analysis: a mathematical case and measurement studies Journal of Vibration and Control Epub ahead of print 20 December 2012. doi: 10.1177/1077546312466579 Shih BY, Lin MC and Chen CY (2012) Autonomous navigation system for radiofrequency identification mobile robot e-book reader Journal of Vibration and Control Epub ahead of print 13 December 2012. doi: 10.1177/1077546312466578 Chang RF, Chen CY, Su FP, Lin HC and Lu C-K (2012) Multiphase SUMO robot based on an agile modeling-driven process for a small mobile robot Journal of Vibration and Control Epub ahead of print 13 December 2012. doi: 10.1177/1077546312464993 Shih B-Y, Lin Y-K, Cheng M-H, Chen C-Y and Chiu C-P (2012) The development of an application program interactive game-based information system Journal of Vibration and Control Epub ahead of print 12 December 2012. doi: 10.1177/1077546312464682 Chen C-Y, Chang C-J and Lin C-H (2012) On dynamic access control in web 2.0 and cloud interactive information hub: technologies Journal of Vibration and Control Epub ahead of print 12 December 2012. doi: 10.1177/1077546312464992 Shin BY, Chen CY and Hsu KH (2012) Robot cross platform system using innovative interactive theory and selection algorithms for Android application Journal of Vibration and Control Epub ahead of print 13 November 2012. doi: 10.1177/1077546312463757 Articles published in an issue Chen C-W (2014) Applications of neural-network-based fuzzy logic control to a nonlinear time-delay chaotic system Journal of Vibration and Control 20 (4): 589-605. Epub ahead of print 5 November 2012. doi: 10.1177/1077546312461370 Chen C-W (2014) A review of intelligent algorithm approaches and neural-fuzzy stability criteria for time-delay tension leg platform systems Journal of Vibration and Control 20 (4): 561-575. Epub ahead of print 5 November 2012. doi: 10.1177/1077546312463759 Chen C-Y, Chang C-J and Lin C-H (2014) On dynamic access control in web 2.0 and cloud interactive information hub: trends and theories Journal of Vibration and Control 20 (4): 548-560. Epub ahead of print 5 November 2012. doi: 10.1177/1077546312463762 Lin M-L and Chen C-W (2014) Stability conditions for ecosystem modeling using the fuzzy Lyapunov method Journal of Vibration and Control 20 (2): 290-302. Epub ahead of print 23 October 2012. doi: 10.1177/1077546312451301 Chen C-H, Kuo C-M, Hsieh S-H and Chen C-Y (2014) Highly efficient very-large-scale integration (VLSI) implementation of probabilistic neural network image interpolator Journal of Vibration and Control 20 (2): 218-224. Epub ahead of print 22 October 2012. doi: 10.1177/1077546312458822 Chen C-Y (2014) Wave vibration and simulation in dissipative media described by irregular boundary surfaces: a mathematical formulation Journal of Vibration and Control 20 (2): 191-203. Epub ahead of print 22 October 2012. doi: 10.1177/1077546312464258 Chen C-H, Yao T-K, Dai J-H and Chen C-Y (2014) A pipelined multiprocessor system- on-a-chip (SoC) design methodology for streaming signal processing Journal of Vibration and Control 20 (2): 163-178. Epub ahead of print 16 October 2012. doi: 10.1177/1077546312458821 Lin M-L and Chen C-W (2014) Fuzzy neural modeling for n-degree ecosystems using the linear matrix inequality approach Journal of Vibration and Control 20 (1): 82-93. Epub ahead of print 8 October 2012. doi: 10.1177/1077546312458533 Chen C-H, Wu W-X and Chen C-Y (2013) Ant-inspired collective problem-solving systems Journal of Vibration and Control 19 (16): 2481-2490. Epub ahead of print 18 September 2012. doi: 10.1177/1077546312456231 Chen C-H, Yao T-K, Kuo C-M and Chen C-Y (2013) Evolutionary design of constructive multilayer feedforward neural network Journal of Vibration and Control 19 (16): 2413-2420. Epub ahead of print 12 September 2012. doi: 10.1177/1077546312456726 Chen C-W (2013) Applications of the fuzzy-neural Lyapunov criterion to multiple time-delay systems Journal of Vibration and Control 19 (13): 2054-2067. Epub ahead of print 16 August 2012. doi: 10.1177/1077546312451034 Chung P-Y, Chen Y-H, Walter L and Chen C-Y (2013) Influence and dynamics of a mobile robot control on mechanical components Journal of Vibration and Control 19 (13): 1923-1935. Epub ahead of print 20 July 2012. doi: 10.1177/1077546312452184 Chen C-W (2013) Neural network-based fuzzy logic parallel distributed compensation controller for structural system Journal of Vibration and Control 19 (11): 1709-1727. Epub ahead of print 22 June 2012. doi: 10.1177/1077546312442233 Chen C-W, Yeh K, Yang H-C, Liu KFR and Liu C-C (2013) A critical review of structural system control by the large-scaled neural network linear-deferential-inclusion-based criterion Journal of Vibration and Control 19 (11): 1658-1673. Epub ahead of print 18 June 2012. doi: 10.1177/1077546312443377 Chen C-H, Kuo C-M, Chen C-Y and Dai J-H (2013) The design and synthesis using hierarchical robotic discrete-event modeling Journal of Vibration and Control 19 (11): 1603-1613. Epub ahead of print 27 June 2012. doi: 10.1177/1077546312449645 Chang CJ, Chen CY and Chou I-T (2013) The design of information and communication technologies: telecom MOD strength machines Journal of Vibration and Control 19 (10): 1499-1513. Epub ahead of print 27 June 2012. doi: 10.1177/1077546312449644 Shih B-Y, Chen C-Y, Li K-H, Wu T-Y, Chen G-Y (2013) A novel NXT control method for implementing force sensing and recycling in a training robot Journal of Vibration and Control 19 (10): 1443-1459. Epub ahead of print 1 June 2012. doi: 10.1177/1077546312446361 Chen C-W, Chen P-C and Chiang W-L (2013) Modified intelligent genetic algorithm-based adaptive neural network control for uncertain structural systems Journal of Vibration and Control 19 (9): 1333-1347. Epub ahead of print 31 May 2012. doi: 10.1177/1077546312442232 Chen C-Y, Shih B-Y, Shih C-H and Wang L-H (2013) Enhancing robust and stability control of a humanoid biped robot: system identification approach. Journal of Vibration and Control 19 (8): 1199-1207. Epub ahead of print 26 April 2012. doi: 10.1177/1077546312442947 Chang C-J, Chen C-Y and Huang C-W (2013) Applications for medical recovery using wireless control of a bluetooth ball with a hybrid G-sensor and human-computer interface technology Journal of Vibration and Control 19 (8): 1139-1151. Epub ahead of print 24 April 2012. doi: 10.1177/1077546312442948 Hsu W-K, Chiou D-J, Chen C-W, Liu M-Y, Chiang W-L and Huang P-C (2013) Sensitivity of initial damage detection for steel structures using the Hilbert-Huang transform method Journal of Vibration and Control 19 (6): 857-878. Epub ahead of print 29 February 2012. doi: 10.1177/1077546311434794 Chen C-Y, Shih B-Y, Shih C-H and Wang L-H (2013) Human–machine interface for the motion control of humanoid biped robots using a graphical user interface Motion Editor Journal of Vibration and Control 19 (6): 814-820. Epub ahead of print 23 February 2012. doi: 10.1177/1077546312437804 Chen C-Y (2013) Internal wave transport, nonlinear manifestation, and mixing in a stratified shear layer - technical briefs Journal of Vibration and Control 19 (3): 429-438. Epub ahead of print 18 January 2012. doi: 10.1177/1077546311429337 Chen C-W (2013) Delay independent criterion for multiple time-delay systems and its application in building structure control systems Journal of Vibration and Control 19 (3): 395-414. Epub ahead of print 17 January 2012. doi: 10.1177/1077546311429341 Chen C-Y, Shih B-Y, Shih C-H and Wang L-H (2013) Design, modeling and stability control for an actuated dynamic walking planar bipedal robot Journal of Vibration and Control 19 (3): 376-384. Epub ahead of print 17 January 2012. doi: 10.1177/1077546311429476 Liu K-C, Liu Y-W, Chen C-Y and Huang W-C (2013) Nonlinear vibration of structural deterioration in reinforced concrete columns: experimental and theoretical investigation Journal of Vibration and Control 19 (3): 323-335. Epub ahead of print 17 January 2012. doi: 10.1177/1077546311429477 Chen C-Y, Shih B-Y and Ma J-m (2013) Development for low-cost and cross-platform robot control environment Journal of Vibration and Control 19 (2): 228-233. Epub ahead of print 11 January 2012. doi: 10.1177/1077546311430107 Shih B-Y, Chang H and Chen C-Y (2013) Path planning for autonomous robots – a comprehensive analysis by a greedy algorithm Journal of Vibration and Control 19 (1): 130-142. Epub ahead of print 17 January 2012. doi: 10.1177/1077546311429841 Liu T-Y, Chiang W-L, Chen C-W, Hsu W-K, Lin C-W, Chiou D-J and Huang P-C (2012) Structural system identification for vibration bridges using the Hilbert–Huang transform Journal of Vibration and Control 18 (13): 1939-1956. Epub ahead of print 14 December 2011. doi: 10.1177/1077546311428347 Chen C-W (2012) Applications of the fuzzy Lyapunov linear matrix inequality criterion to a chaotic structural system Journal of Vibration and Control 18 (13): 1925-1938. Epub ahead of print 14 December 2011. doi: 10.1177/1077546311428346 Chen C-W (2012) Applications of linear differential inclusion-based criterion to a nonlinear chaotic system: a critical review Journal of Vibration and Control 18 (12): 1886-1899. Epub ahead of print 14 December 2011. doi: 10.1177/1077546311428345 Shih B-Y, Chen C-Y and Chou W (2012) An enhanced obstacle avoidance and path correction mechanism for an autonomous intelligent robot with multiple sensors Journal of Vibration and Control 18 (12): 1855-1864. Epub ahead of print 14 December 2011. doi: 10.1177/1077546311426734 Chen C-W, Yeh K, Liu KFR and Lin M-L (2012) Applications of fuzzy control to nonlinear time-delay systems using the linear matrix inequality fuzzy Lyapunov method Journal of Vibration and Control 18 (10): 1561-1574. Epub ahead of print 18 October 2011. doi: 10.1177/1077546311410765 Chen C-Y (2012) A critical review of internal wave dynamics. Part 2 – Laboratory experiments and theoretical physics Journal of Vibration and Control 18 (7): 983-1008. Epub ahead of print 21 September 2011. doi: 10.1177/1077546310397561 Chen C-Y and Huang P-H (2012) Review of an autonomous humanoid robot and its mechanical control Journal of Vibration and Control 18 (7): 973-982. Epub ahead of print 21 September 2011. doi: 10.1177/1077546310395974 Shih B-Y, Chen C-Y, Chang H and Ma J-m (2012) Dynamics and control for robotic manipulators using a greedy algorithm approach Journal of Vibration and Control 18 (6): 859-866. Epub ahead of print 25 August 2011. doi: 10.1177/1077546311407649 Yeh K, Chen C-W, Lo DC and Liu KFR (2012) Neural-network fuzzy control for chaotic tuned mass damper systems with time delays Journal of Vibration and Control 18 (6): 785-795. Epub ahead of print 15 August 2011. doi: 10.1177/1077546311407538 Chen C-Y, Shih B-Y, Shih C-H and Chou W-C (2012) The development of autonomous low-cost biped mobile surveillance robot by intelligent bricks Journal of Vibration and Control 18 (5): 577-586. Epub ahead of print 21 April 2011. doi: 10.1177/1077546310371349 Chen C-Y (2012) A critical review of internal wave dynamics. Part 1 – Remote sensing and in-situ observations Journal of Vibration and Control 18 (3): 417-436. Epub ahead of print 13 July 2011. doi: 10.1177/1077546310395971 Tseng C-P, Chen C-W and Liu KFR (2012) Risk control allocation model for pressure vessels and piping project Journal of Vibration and Control 18 (3): 385-394. Epub ahead of print 13 July 2011. doi: 10.1177/1077546311403182 Lin M-L and Chen C-W (2011) Stability analysis of community and ecosystem hierarchies using the Lyapunov method Journal of Vibration and Control 17 (13): 1930-1937. Epub ahead of print 9 December 2010. doi: 10.1177/1077546310385737 Chen C-Y, Shih B-Y, Chou W-C, Li Y-J and Chen Y-H (2011) Obstacle avoidance design for a humanoid intelligent robot with ultrasonic sensors Journal of Vibration and Control 17 (12): 1798-1804. Epub ahead of print 26 November 2010. doi: 10.1177/1077546310381101 Chen C-W (2011) Fuzzy control of interconnected structural systems using the fuzzy Lyapunov method Journal of Vibration and Control 17 (11): 1693-1702. Epub ahead of print 23 November 2010. doi: 10.1177/1077546310379625 Shih B-Y, Chen C-Y and Chou W-C (2011) Obstacle avoidance using a path correction method for autonomous control of a biped intelligent robot Journal of Vibration and Control 17 (10): 1567-1573. Epub ahead of print 22 November 2010. doi: 10.1177/1077546310372004 Tang J-P, Chiou D-J, Chen C-W, Chiang W-L, Hsu W-K, Chen C-Y and Liu T-Y (2011) A case study of damage detection in benchmark buildings using a Hilbert-Huang Transform-based method Journal of Vibration and Control 17 (4): 623-636. Epub ahead of print 8 November 2010. doi: 10.1177/1077546309360053 Liu TY, Chiang WL, Chen CW, Hsu WK, Lu LC and Chu TJ (2011) Identification and monitoring of bridge health from ambient vibration data Journal of Vibration and Control 17 (4): 589-603. Epub ahead of print 12 November 2010. doi: 10.1177/1077546309360049 Lin JW, Huang CW, Shih CH and Chen CY (2011) Fuzzy Lyapunov Stability Analysis and NN Modeling for Tension Leg Platform Systems Journal of Vibration and Control 17 (1): 151-158. Epub ahead of print 25 August 2010. doi: 10.1177/1077546309350477 Lee WI, Chen CY, Kuo HM and Sui YC (2010) The Development of Half-circle Fuzzy Numbers and Application in Fuzzy Control Journal of Vibration and Control 16 (13): 1977-1987. Epub ahead of print 22 April 2010. doi: 10.1177/1077546309349849

In 2013 the Editor of Journal of Vibration and Control and SAGE became aware of a peer review ring involving assumed and fabricated identities that appeared to centre around Peter Chen at National Pingtung University of Education, Taiwan (NPUE). SAGE and the Editor then began a complex investigation into the case during the rest of 2013 and 2014. Following an unsatisfactory response from Peter Chen, NPUE was notified. NPUE were serious in addressing the Journal and SAGE’s concerns. NPUE confirmed that the institution was investigating Peter Chen. SAGE subsequently uncovered a citation ring involving the above mentioned author and others. We regret that individual authors have compromised the academic record by perverting the peer review process and apologise to readers. On uncovering problems with peer review and citation SAGE immediately put steps in place to avoid similar vulnerability of the Journal to exploitation in the future. More information may be found at www.sagepub.co.uk/JVC_Statement_2014 . The Journal and SAGE understand from NPUE that Peter Chen has resigned his post at NPUE. The following articles are retracted because after thorough investigation evidence points towards them having at least one author or being reviewed by at least one reviewer who has been implicated in the peer review ring and/or citation ring. All authors have had an opportunity to respond to the allegations and proposed actions. OnlineFirst articles (these articles will not be published in an issue) Chen CY, Chen T-H, Chen Y-H, Yu S-E and Chung P-Y (2013) Information technology system modeling an integrated C-TAM-TPB model to the validation of ocean tidal analyses Journal of Vibration and Control Epub ahead of print 7 May 2013. doi: 10.1177/1077546312472924 Chang R-F, Chen CY, Su F-P and Lin H-C (2013) A two-step approach for broadband digital signal processing technique Journal of Vibration and Control Epub ahead of print 26 April 2013. doi: 10.1177/1077546312472925 Chen TH, Chang CJ, Yu SE, Chung PY and Liu C-K (2013) Nonlinear information analysis and system management technique: the influence of design experience and control complexity Journal of Vibration and Control Epub ahead of print 12 April 2013. doi: 10.1177/1077546312473321 Chen CY, Shih BY, Chen YH, Yu SE and Liu YC (2013) The exploration of a 3T flow model using vibrating NXT: II. Model validation Journal of Vibration and Control Epub ahead of print 10 April 2013. doi: 10.1177/1077546312470481 Chen CY, Shih BY, Chen YH, Yu SE and Liu YC (2013) The exploration of 3T flow model using vibrating NXT: I. model formulation Journal of Vibration and Control Epub ahead of print 6 February 2013. doi: 10.1177/1077546312467360 Lin M-L and Chen C-W (2013) Stability analysis of fuzzy-based NN modeling for ecosystems using fuzzy Lyapunov methods Journal of Vibration and Control Epub ahead of print 6 February 2013. doi: 10.1177/1077546312466687 Chen CY, Chen TH, Chen YH and Chiu J (2012) A multi-stage method for deterministic-statistical analysis: a mathematical case and measurement studies Journal of Vibration and Control Epub ahead of print 20 December 2012. doi: 10.1177/1077546312466579 Shih BY, Lin MC and Chen CY (2012) Autonomous navigation system for radiofrequency identification mobile robot e-book reader Journal of Vibration and Control Epub ahead of print 13 December 2012. doi: 10.1177/1077546312466578 Chang RF, Chen CY, Su FP, Lin HC and Lu C-K (2012) Multiphase SUMO robot based on an agile modeling-driven process for a small mobile robot Journal of Vibration and Control Epub ahead of print 13 December 2012. doi: 10.1177/1077546312464993 Shih B-Y, Lin Y-K, Cheng M-H, Chen C-Y and Chiu C-P (2012) The development of an application program interactive game-based information system Journal of Vibration and Control Epub ahead of print 12 December 2012. doi: 10.1177/1077546312464682 Chen C-Y, Chang C-J and Lin C-H (2012) On dynamic access control in web 2.0 and cloud interactive information hub: technologies Journal of Vibration and Control Epub ahead of print 12 December 2012. doi: 10.1177/1077546312464992 Shin BY, Chen CY and Hsu KH (2012) Robot cross platform system using innovative interactive theory and selection algorithms for Android application Journal of Vibration and Control Epub ahead of print 13 November 2012. doi: 10.1177/1077546312463757 Articles published in an issue Chen C-W (2014) Applications of neural-network-based fuzzy logic control to a nonlinear time-delay chaotic system Journal of Vibration and Control 20 (4): 589-605. Epub ahead of print 5 November 2012. doi: 10.1177/1077546312461370 Chen C-W (2014) A review of intelligent algorithm approaches and neural-fuzzy stability criteria for time-delay tension leg platform systems Journal of Vibration and Control 20 (4): 561-575. Epub ahead of print 5 November 2012. doi: 10.1177/1077546312463759 Chen C-Y, Chang C-J and Lin C-H (2014) On dynamic access control in web 2.0 and cloud interactive information hub: trends and theories Journal of Vibration and Control 20 (4): 548-560. Epub ahead of print 5 November 2012. doi: 10.1177/1077546312463762 Lin M-L and Chen C-W (2014) Stability conditions for ecosystem modeling using the fuzzy Lyapunov method Journal of Vibration and Control 20 (2): 290-302. Epub ahead of print 23 October 2012. doi: 10.1177/1077546312451301 Chen C-H, Kuo C-M, Hsieh S-H and Chen C-Y (2014) Highly efficient very-large-scale integration (VLSI) implementation of probabilistic neural network image interpolator Journal of Vibration and Control 20 (2): 218-224. Epub ahead of print 22 October 2012. doi: 10.1177/1077546312458822 Chen C-Y (2014) Wave vibration and simulation in dissipative media described by irregular boundary surfaces: a mathematical formulation Journal of Vibration and Control 20 (2): 191-203. Epub ahead of print 22 October 2012. doi: 10.1177/1077546312464258 Chen C-H, Yao T-K, Dai J-H and Chen C-Y (2014) A pipelined multiprocessor system- on-a-chip (SoC) design methodology for streaming signal processing Journal of Vibration and Control 20 (2): 163-178. Epub ahead of print 16 October 2012. doi: 10.1177/1077546312458821 Lin M-L and Chen C-W (2014) Fuzzy neural modeling for n-degree ecosystems using the linear matrix inequality approach Journal of Vibration and Control 20 (1): 82-93. Epub ahead of print 8 October 2012. doi: 10.1177/1077546312458533 Chen C-H, Wu W-X and Chen C-Y (2013) Ant-inspired collective problem-solving systems Journal of Vibration and Control 19 (16): 2481-2490. Epub ahead of print 18 September 2012. doi: 10.1177/1077546312456231 Chen C-H, Yao T-K, Kuo C-M and Chen C-Y (2013) Evolutionary design of constructive multilayer feedforward neural network Journal of Vibration and Control 19 (16): 2413-2420. Epub ahead of print 12 September 2012. doi: 10.1177/1077546312456726 Chen C-W (2013) Applications of the fuzzy-neural Lyapunov criterion to multiple time-delay systems Journal of Vibration and Control 19 (13): 2054-2067. Epub ahead of print 16 August 2012. doi: 10.1177/1077546312451034 Chung P-Y, Chen Y-H, Walter L and Chen C-Y (2013) Influence and dynamics of a mobile robot control on mechanical components Journal of Vibration and Control 19 (13): 1923-1935. Epub ahead of print 20 July 2012. doi: 10.1177/1077546312452184 Chen C-W (2013) Neural network-based fuzzy logic parallel distributed compensation controller for structural system Journal of Vibration and Control 19 (11): 1709-1727. Epub ahead of print 22 June 2012. doi: 10.1177/1077546312442233 Chen C-W, Yeh K, Yang H-C, Liu KFR and Liu C-C (2013) A critical review of structural system control by the large-scaled neural network linear-deferential-inclusion-based criterion Journal of Vibration and Control 19 (11): 1658-1673. Epub ahead of print 18 June 2012. doi: 10.1177/1077546312443377 Chen C-H, Kuo C-M, Chen C-Y and Dai J-H (2013) The design and synthesis using hierarchical robotic discrete-event modeling Journal of Vibration and Control 19 (11): 1603-1613. Epub ahead of print 27 June 2012. doi: 10.1177/1077546312449645 Chang CJ, Chen CY and Chou I-T (2013) The design of information and communication technologies: telecom MOD strength machines Journal of Vibration and Control 19 (10): 1499-1513. Epub ahead of print 27 June 2012. doi: 10.1177/1077546312449644 Shih B-Y, Chen C-Y, Li K-H, Wu T-Y, Chen G-Y (2013) A novel NXT control method for implementing force sensing and recycling in a training robot Journal of Vibration and Control 19 (10): 1443-1459. Epub ahead of print 1 June 2012. doi: 10.1177/1077546312446361 Chen C-W, Chen P-C and Chiang W-L (2013) Modified intelligent genetic algorithm-based adaptive neural network control for uncertain structural systems Journal of Vibration and Control 19 (9): 1333-1347. Epub ahead of print 31 May 2012. doi: 10.1177/1077546312442232 Chen C-Y, Shih B-Y, Shih C-H and Wang L-H (2013) Enhancing robust and stability control of a humanoid biped robot: system identification approach. Journal of Vibration and Control 19 (8): 1199-1207. Epub ahead of print 26 April 2012. doi: 10.1177/1077546312442947 Chang C-J, Chen C-Y and Huang C-W (2013) Applications for medical recovery using wireless control of a bluetooth ball with a hybrid G-sensor and human-computer interface technology Journal of Vibration and Control 19 (8): 1139-1151. Epub ahead of print 24 April 2012. doi: 10.1177/1077546312442948 Hsu W-K, Chiou D-J, Chen C-W, Liu M-Y, Chiang W-L and Huang P-C (2013) Sensitivity of initial damage detection for steel structures using the Hilbert-Huang transform method Journal of Vibration and Control 19 (6): 857-878. Epub ahead of print 29 February 2012. doi: 10.1177/1077546311434794 Chen C-Y, Shih B-Y, Shih C-H and Wang L-H (2013) Human–machine interface for the motion control of humanoid biped robots using a graphical user interface Motion Editor Journal of Vibration and Control 19 (6): 814-820. Epub ahead of print 23 February 2012. doi: 10.1177/1077546312437804 Chen C-Y (2013) Internal wave transport, nonlinear manifestation, and mixing in a stratified shear layer - technical briefs Journal of Vibration and Control 19 (3): 429-438. Epub ahead of print 18 January 2012. doi: 10.1177/1077546311429337 Chen C-W (2013) Delay independent criterion for multiple time-delay systems and its application in building structure control systems Journal of Vibration and Control 19 (3): 395-414. Epub ahead of print 17 January 2012. doi: 10.1177/1077546311429341 Chen C-Y, Shih B-Y, Shih C-H and Wang L-H (2013) Design, modeling and stability control for an actuated dynamic walking planar bipedal robot Journal of Vibration and Control 19 (3): 376-384. Epub ahead of print 17 January 2012. doi: 10.1177/1077546311429476 Liu K-C, Liu Y-W, Chen C-Y and Huang W-C (2013) Nonlinear vibration of structural deterioration in reinforced concrete columns: experimental and theoretical investigation Journal of Vibration and Control 19 (3): 323-335. Epub ahead of print 17 January 2012. doi: 10.1177/1077546311429477 Chen C-Y, Shih B-Y and Ma J-m (2013) Development for low-cost and cross-platform robot control environment Journal of Vibration and Control 19 (2): 228-233. Epub ahead of print 11 January 2012. doi: 10.1177/1077546311430107 Shih B-Y, Chang H and Chen C-Y (2013) Path planning for autonomous robots – a comprehensive analysis by a greedy algorithm Journal of Vibration and Control 19 (1): 130-142. Epub ahead of print 17 January 2012. doi: 10.1177/1077546311429841 Liu T-Y, Chiang W-L, Chen C-W, Hsu W-K, Lin C-W, Chiou D-J and Huang P-C (2012) Structural system identification for vibration bridges using the Hilbert–Huang transform Journal of Vibration and Control 18 (13): 1939-1956. Epub ahead of print 14 December 2011. doi: 10.1177/1077546311428347 Chen C-W (2012) Applications of the fuzzy Lyapunov linear matrix inequality criterion to a chaotic structural system Journal of Vibration and Control 18 (13): 1925-1938. Epub ahead of print 14 December 2011. doi: 10.1177/1077546311428346 Chen C-W (2012) Applications of linear differential inclusion-based criterion to a nonlinear chaotic system: a critical review Journal of Vibration and Control 18 (12): 1886-1899. Epub ahead of print 14 December 2011. doi: 10.1177/1077546311428345 Shih B-Y, Chen C-Y and Chou W (2012) An enhanced obstacle avoidance and path correction mechanism for an autonomous intelligent robot with multiple sensors Journal of Vibration and Control 18 (12): 1855-1864. Epub ahead of print 14 December 2011. doi: 10.1177/1077546311426734 Chen C-W, Yeh K, Liu KFR and Lin M-L (2012) Applications of fuzzy control to nonlinear time-delay systems using the linear matrix inequality fuzzy Lyapunov method Journal of Vibration and Control 18 (10): 1561-1574. Epub ahead of print 18 October 2011. doi: 10.1177/1077546311410765 Chen C-Y (2012) A critical review of internal wave dynamics. Part 2 – Laboratory experiments and theoretical physics Journal of Vibration and Control 18 (7): 983-1008. Epub ahead of print 21 September 2011. doi: 10.1177/1077546310397561 Chen C-Y and Huang P-H (2012) Review of an autonomous humanoid robot and its mechanical control Journal of Vibration and Control 18 (7): 973-982. Epub ahead of print 21 September 2011. doi: 10.1177/1077546310395974 Shih B-Y, Chen C-Y, Chang H and Ma J-m (2012) Dynamics and control for robotic manipulators using a greedy algorithm approach Journal of Vibration and Control 18 (6): 859-866. Epub ahead of print 25 August 2011. doi: 10.1177/1077546311407649 Yeh K, Chen C-W, Lo DC and Liu KFR (2012) Neural-network fuzzy control for chaotic tuned mass damper systems with time delays Journal of Vibration and Control 18 (6): 785-795. Epub ahead of print 15 August 2011. doi: 10.1177/1077546311407538 Chen C-Y, Shih B-Y, Shih C-H and Chou W-C (2012) The development of autonomous low-cost biped mobile surveillance robot by intelligent bricks Journal of Vibration and Control 18 (5): 577-586. Epub ahead of print 21 April 2011. doi: 10.1177/1077546310371349 Chen C-Y (2012) A critical review of internal wave dynamics. Part 1 – Remote sensing and in-situ observations Journal of Vibration and Control 18 (3): 417-436. Epub ahead of print 13 July 2011. doi: 10.1177/1077546310395971 Tseng C-P, Chen C-W and Liu KFR (2012) Risk control allocation model for pressure vessels and piping project Journal of Vibration and Control 18 (3): 385-394. Epub ahead of print 13 July 2011. doi: 10.1177/1077546311403182 Lin M-L and Chen C-W (2011) Stability analysis of community and ecosystem hierarchies using the Lyapunov method Journal of Vibration and Control 17 (13): 1930-1937. Epub ahead of print 9 December 2010. doi: 10.1177/1077546310385737 Chen C-Y, Shih B-Y, Chou W-C, Li Y-J and Chen Y-H (2011) Obstacle avoidance design for a humanoid intelligent robot with ultrasonic sensors Journal of Vibration and Control 17 (12): 1798-1804. Epub ahead of print 26 November 2010. doi: 10.1177/1077546310381101 Chen C-W (2011) Fuzzy control of interconnected structural systems using the fuzzy Lyapunov method Journal of Vibration and Control 17 (11): 1693-1702. Epub ahead of print 23 November 2010. doi: 10.1177/1077546310379625 Shih B-Y, Chen C-Y and Chou W-C (2011) Obstacle avoidance using a path correction method for autonomous control of a biped intelligent robot Journal of Vibration and Control 17 (10): 1567-1573. Epub ahead of print 22 November 2010. doi: 10.1177/1077546310372004 Tang J-P, Chiou D-J, Chen C-W, Chiang W-L, Hsu W-K, Chen C-Y and Liu T-Y (2011) A case study of damage detection in benchmark buildings using a Hilbert-Huang Transform-based method Journal of Vibration and Control 17 (4): 623-636. Epub ahead of print 8 November 2010. doi: 10.1177/1077546309360053 Liu TY, Chiang WL, Chen CW, Hsu WK, Lu LC and Chu TJ (2011) Identification and monitoring of bridge health from ambient vibration data Journal of Vibration and Control 17 (4): 589-603. Epub ahead of print 12 November 2010. doi: 10.1177/1077546309360049 Lin JW, Huang CW, Shih CH and Chen CY (2011) Fuzzy Lyapunov Stability Analysis and NN Modeling for Tension Leg Platform Systems Journal of Vibration and Control 17 (1): 151-158. Epub ahead of print 25 August 2010. doi: 10.1177/1077546309350477 Lee WI, Chen CY, Kuo HM and Sui YC (2010) The Development of Half-circle Fuzzy Numbers and Application in Fuzzy Control Journal of Vibration and Control 16 (13): 1977-1987. Epub ahead of print 22 April 2010. doi: 10.1177/1077546309349849

Urban and regional planning is closely related to spatial analysis to be able to fully describe changes in the physical conditions of the earth’s surface in the planning area. Rapid population growth, urban expansion, and various changes as a form of anthropogenic processes make it necessary for planners to develop spatial analysis tools. It gives rise to connections and discussions between sciences and multi-disciplines such as spatial planning, geography, geomatics, and various scientific disciplines that utilize spatial analysis. In the last decade, the development of spatial analysis for urban and regional planning, especially applied geomatics, has been very rapid during the pandemic. The pandemic has forced people to be able to use tools that can analyze scientific phenomena without having to come into contact with the planning object. Furthermore, spatial big data technologies, location-based API, and open data mobility continue to develop during the pandemic. The development of this technology makes it easier to improve urban services, so it is the beginning of a historical milestone for the emergence of smart city ideas and concepts, especially in Indonesia. Seeing the importance of exchanging ideas and thoughts regarding geomatics technology such as GIS and Remote Sensing to support the smart city concept, it is necessary to hold the 5th Geoplanning-International Conference of Geomatics and Planning with the main topic “GIS and Remote Sensing Applications for Smart City and Regional Development in the Post-Pandemic Era.” To detail the discussion, we invited experts such as Prof. Josaphat Tetuko, Ph.D. (Chiba University, Japan), Dr. Soheil Sabri (University of Orlando, USA), Dr. Khayrul Hisyam (University of Technology Malaysia, Malaysia), and Prof. Dr.rer.nat. Imam Buchori (Universitas Diponegoro, Indonesia). They will enrich the ideas for developing spatial analysis with GIS and Remote sensing in the post-pandemic era. With this seminar, policies will emerge specifically to initiate post-pandemic future steps in using geomatics applications in spatial analysis. This seminar is an essential step for communication and expanding international networks so that the development of spatial analysis tools and methods can be more comprehensive and synergize various aspects of development. Apart from academic development needs, this step also supports the activities of practitioners and policymakers so that the results of this seminar can enrich the concept of decision-support systems and development policies. For that reason, this seminar will become a forum for effective communication from academics, practitioners, and policy-making actors. We would also like to thank the Organizing Committee and all parties who supported the realization of this seminar. Firstly, for Universitas Diponegoro through World Class University Program and our primary partner, the Regional Research and Innovation Agency of Central Java province (BRIDA) who contributed significantly to the seminar. Furthermore, we would also like to express our thanks to the sponsors who have helped us, such as Podomoro University, PT INDIS (Spatial Digital Innovation), IAP Central Java Chapter, Geomatics and Planning Laboratory, and the Cluster Members of Geomatics Application for Sustainable Development (CEGAS). Hopefully, this seminar will bridge knowledge in applied spatial analysis, GIS, and Remote Sensing from various parts of the world. Kindly Regards, Assoc. Prof. Dr. Anang Wahyu Sejati The Chairman of the Organizing Committee of the 5th Geoplanning International Conference List of Conference Committees are available in the pdf.

Digital culture, as we know it, owes much to space exploration. The technological pursuit of outer space has fuelled innovations in signal processing and automated computing that have left an impact on the hardware and software that make our digital present possible. Developments in satellite technologies, for example, produced far-reaching improvements in digital image processing (Gonzalez and Woods) and the demands of the Apollo missions advanced applications of the integrated circuit – the predecessor to the microchip (Hall). All the inventive digital beginnings in space found their way back to earth and contributed to the development of contemporary formations of culture composed around practices dependent on and driven by digital technologies. Their terrestrial adoption and adaptation supported a revolution in information, mediation and communication technologies, increasing the scope and speed of global production, exchange and use of data and advancing techniques of imaging, mapping, navigation, surveillance, remote sensing and telemetry to a point that could only be imagined before the arrival of the space age. Steadily knotted with contemporary scientific, commercial and military endeavours and the fabric of the quotidian, digital devices and practices now have a bearing upon all aspects of our pursuits, pleasures and politics. Our increasing reliance upon the digital shaped the shared surfaces of human societies and produced cultures in their own right. While aware of the uneasy baggage of the term ‘culture’, we use it here to designate all digitally grounded objects, systems and processes which are materially and socially inflecting our ways of life. In this sense, we consider both what Michael Hardt and Antonio Negri describe as “those results of social production that are necessary for social interaction and further production, such as knowledges, languages, codes, information, affects, and so forth” (viii), and the material contexts of these products of the social. The effects of digital technologies on the socio-material ambits of human life are many and substantial and – as we want to suggest here – evolving through their ‘extraterrestrial’ beginnings. The contemporary courses of digital cultures not only continue to develop through investments in space exploration, they are themselves largely contingent on the technologies that we have placed in outer space, for instance, global telecommunications infrastructure, GPS, Google maps, weather and climate monitoring facilities and missile grids all rely on the constellation of satellites orbiting the earth. However, we have been increasingly witnessing something new: modes of social production that developed on earth from the technical demands of the space age are now being directed, or rather returned back to have new beginnings beyond the globe. Our focus in this paper is this outward momentum of digital cultures. We do not aim to overview the entire history of the digital in outer space, but instead to frame the extraterrestrial extension of human technologies in terms of the socio-material dimensions of extra-planetary digital cultures. Hannah Arendt described how the space age accelerated the already rapid pace of techno-scientific development, denying us pause during which to grasp its effects upon the “human condition”. Our treacherously fast technological conquest of outer space leaves in its wake an aporia in language and “the trouble”, as Arendt puts it, is that we will “forever be unable to understand, that is, to think and speak about the things which nevertheless we are able to do” (3). This crisis in language has at its core a problem of ontology: a failure to recognise that the words we use to describe ourselves are always, and have always been, bound up in our technological modes of being. As thinkers such as Gilbert Simondon and Bernard Stiegler argued and Arendt derided (but could not deny), our technologies are inseparably bound up with the evolutionary continuum of the human and the migration of our digital ways of life into outer space still further complicates articulation of our techno-logic condition. In Stiegler’s view the technical is the primordial supplement to the human into which we have been “exteriorising” our “interiors” of social memory and shared culture to alter, assert and advance the material-social ambits of our living milieu and which have been consequently changing the idea of what it is to be human (141). Without technologies – what Stiegler terms “organised inorganic matter” (17), which mediate our relationships to the world – there is no human in the inhuman extraterrestrial environment and so, effectively, it is only through the organisation of inert matter that culture or social life can exist outside the earth. Offering the possibility of digitally abstracting and processing the complexities and perils of outer space, space technologies are not only a means of creating a human milieu ‘out there’, but of expediting potentially endless extra-planetary progress. The transposition of digital culture into outer space occasions a series of beginnings (and returns). In this paper, we explore extra-planetary digital culture as a productive trajectory in broader discussions of the ontological status of technologies that are socially and materially imbricated in the idea of the human. We consider the digital facilitation of exchanges between earth and outer space and assign them a place in an evolving discourse concerned with expressing the human in relation to the technological. We suggest that ontological questions occasioned by the socio-material effects of technologies require consideration of the digital in outer space and that the inhuman milieu of the extraterrestrial opens up a unique perspective from which to consider the nascent shape of what might be the emerging extra-planetary beginnings of the post human. Digital Exurbias The unfolding of extra-planetary digital cultures necessitates the simultaneous exteriorisation of our production of the social into outer space and the domestication of our extraterrestrial activities here on earth. Caught in the processes of mediated exploration, the moon, Mars, Pluto and other natural or human-made celestial bodies such as the International Space Station are almost becoming remote outer suburbs – exurbias of earth. Digital cultures are reaching toward and expanding into outer space through the development of technologies, but more specifically through advancing the reciprocal processes of social exchanges between terrestrial and extraterrestrial space. Whether it be through public satellite tracking via applications such as Heavens-Above or The High Definition Earth Viewing system’s continuous video feed from the camera attached to the ISS (NASA, "High Definition") – which streams us back an image of our planetary habitat from an Archimedean point of view – we are being encouraged to embrace a kind of digital enculturation of extraterrestrial space. The production of social life outside our own planet has already had many forms, but perhaps can be seen most clearly aboard the International Space Station, presently the only extraterrestrial environment physically occupied by humans. Amongst its many landmark events, the ISS has become a vigorous node of social media activity. For example, in 2013 Chris Hadfield became a Twitter phenomenon while living aboard the ISS; the astronaut gathered over a million Twitter followers, he made posts on Facebook, Tumblr and Reddit, multiple mini-vids, and his rendition of David Bowie’s Space Oddity on YouTube (Hadfield) has thus far been viewed over 26 million times. His success, as has been noted, was not merely due to his use of social media in the unique environment of outer space, but rather that he was able to make the highly technical lives of those in space familiar by revealing to a global audience “how you make a sandwich in microgravity, how you get a haircut” (Potter). This techno-mediation of the everyday onboard ISS is, from a Stieglerian perspective, a gesture toward the establishment of “the relation of the living to its milieu” (49). As part of this process, the new trends and innovations of social media on earth are, for example, continuously replayed and rehearsed in the outer space, with a litany of ‘digital firsts’ such as the first human-sent extraterrestrial ‘tweet’, first Instagram post, first Reddit AMA and first Pinterest ‘pin’ (Knoblauch), betraying our obsessions with serial digital beginnings. The constitution of an extra-planetary milieu progresses with the ability to conduct real-time interactions between those on and outside the earth. This, in essence, collapses all social aspects of the physical barrier and the ISS becomes merely a high-tech outer suburb of the globe. Yet fluid, uninterrupted, real-time communications with the station have only just become possible. Previously, the Iinternet connections between earth and the ISS were slow and troublesome, akin to the early dial-up, but the recently installed Optical Payload for Lasercomm Science (OPAL), a laser communications system, now enables the incredible speeds needed to effortlessly communicate with the human orbital outpost in real-time. After OPAL was affixed to the ISS, it was first tested using the now-traditional system test, “hello, world” (NASA, "Optical Payload"); referencing the early history of digital culture itself, and in doing so, perhaps making the most apt use of this phrase, ever. Open to Beginnings Digital technologies have become vital in sustaining social life, facilitating the immaterial production of knowledge, information and affects (Hardt and Negri), but we have also become increasingly attentive to their materialities; or rather, the ‘matter of things’ never went away, it was only partially occluded by the explosion of social interactivities sparked by the ‘digital revolution’. Within the ongoing ‘material turn’, there have been a gamut of inquiries into the material contexts of the ‘digital’, for example, in the fields of digital anthropology (Horst and Miller), media studies (Kirschenbaum, Fuller, Parikka) and science and technology studies (Gillespie, Boczkowski, and Foot) – to mention only a very few of these works. Outside the globe material things are again insistent, they contain and maintain the terrestrial life from which they were formed. Outer space quickens our awareness of the materiality underpinning the technical apparatus we use to mediate and communicate and the delicate support that it provides for the complex of digital practices built upon it. Social exchanges between earth and its extra-planetary exurbias are made possible through the very materiality of digital signals within which these immaterial interactions can take place. In the pared down reality of contemporary life in outer space, the sociality of the digital is also harnessed to bring forth forms of material production. For example, when astronauts in space recently needed a particular wrench, NASA was able to email them a digital file from which they were then able print the required tool (Shukman). Through technologies such as the 3D printer, the line between products of the social and the creation of material objects becomes blurred. In extra-planetary space, the ‘thingness’ of technologies is at least as crucial as it is on earth and yet – as it appears – material production in space might eventually rely on the infrastructures occasioned by the immaterial exchanges of digital culture. As technical objects, like the 3D printer, are evolving so too are conceptions of the relationship that humans have with technologies. One result of this is the idea that technologies themselves are becoming capable of producing social life; in this conception, the relationships and interrelationships of and with technologies become a potential field of study. We suggest here that the extra-planetary extension of digital cultures will not only involve, but help shape, the evolution of these relationships, and as such, our conceptions and articulations of a future beyond the globe will require a re-positioning of the human and technical objects within the arena of life. This will require new beginnings. Yet beginnings are duplicitous, as Maurice Blanchot wrote – “one must never rely on the word beginning”; technologies have always been part of the human, our rapport is in some sense what defines the human. To successfully introduce the social in outer space will involve an evolution in both the theory and practice of this participation. And it is perhaps through the extra-planetary projection of digital culture that this will come about. In outer space the human partnership with the objects of technology, far from being a utopian promise or dystopian end, is not only a necessity but also a productive force shaping the collective beginnings of our historical co-evolution. Objects of technology that migrate into space appear designed to smooth the ontological misgivings that might arise from our extra-planetary progress. While they are part of the means for producing the social in outer space and physical fortifications against human frailty, they are perhaps also the beginnings of the extraterrestrial enculturation of technologies, given form. One example of such technologies is the anthropomorphic robots currently developed by the Dextrous Robotics Laboratory for NASA. The latest iteration of these, Robotnaut 2 was the first humanoid robot in space; it is a “highly dexterous” robot that works beside astronauts performing a wide range of manual and sensory activities (NASA, "Robonaut"). The Robonaut 2 has recorded its own series of ‘firsts’, including being the “first robot inside a human space vehicle operating without a cage, and first robot to work with human-rated tools in space” (NASA, "Robonaut"). One of the things which mark it as a potential beginning is this ability to use the same tools as astronauts. This suggests the image of a tool using a tool – at first glance, something now quite common in the operation of machines – however, in this case the robot is able to manipulate a tool that was not designed for it. This then might also include the machine itself in our own origins, in that evolutionary moment of grasping a tool or stealing fire from the gods. As an exteriorisation of the human, these robots also suggest that a shared extra-planetary culture would involve acknowledging the participation of technologic entities, recognising that they share these beginnings with us, and thus are participating in the origins of our potential futures beyond the globe – the prospects of which we can only imagine now. Identifiably human-shaped, Robonauts are created to socialise with, and labour together with, astronauts; they share tools and work on the same complex tasks in the same environment aboard the International Space Station. In doing so, their presence might break down the separation between the living and the nonliving, giving form to Stiegler’s hypothesis regarding the ontology of technical objects, and coming to represent a mode of “being” described as “organized inert matter” (49). The robonaut is not dominated by the human, like a hand-held tool, nor is it dominating like a faceless system; it is engineered to be conducted, ‘organised’ rather than controlled. In addition to its anthropomorphic tendencies – which among other things, makes them appear more human than astronauts wearing space suits – is the robonaut’s existence as part of an assemblage of networked life that links technical objects with wet bodies into an animate system of information and matter. While this “heralds the possibility of making the technical being part of culture” (Simondon 16), it also suggests that extra-planetary digital cultures will harness what Simondon formulates as an “ensemble” of “open machines” – a system of sensitive technologies toward which the human acts as “organizer and as a living interpreter” (13). In the design of our extra-planetary envoys we are evolving toward this openness; the Robonaut, a technical object that shares in digital culture and its social and material production, might be the impetus through which the human and technological acquire a language that expresses a kind of evolutionary dialectic. As a system of inclusions that uses technologies to incorporate/socialise everything it can, including its own relationship with technical objects, digital culture in outer space clarifies how technologies might relate and “exchange information with each other through the intermediacy of the human interpreter” (Simondon 14). The Robonaut, like the tweeting astronaut, provides the test signals for what might eventually become points of communication between different modes of being. In this context, culture is collective cumulative memory; the ‘digital’ form of culture suggests an evolution of both technologic life and human life because it incorporates the development of more efficient means of storing and transmitting memory as cultural knowledge, while recognising the experience of both. Social learning and memory will first define the evolution of the Robonaut. Digital culture and the social expressed through technology – toward a shared social life and cultural landscape established in outer space – will involve the conservation, transmission and setting of common patterns that pool a composite interplay of material, neurobiologic and technologic variables. This will in turn require new practices of enculturation, conviviality with technologies, a sharing, incorporation and care. Only then might this transform into a discussion concerning the ontologies of the ‘we’. (Far from) Conclusions Hannah Arendt wrote that technologic progress could not find full expression in “normal” (3) language and that we must constantly be aware that our knowledge, politics, ethics and interactions with regard to technologies are incomplete, unformulated or unexpressed. It could be said then that our relationship with technologies is constantly beginning, that this need to keep finding new language to grasp it means that it actually progresses through its rehearsal of beginnings, through the need to maintain the productive inquisitive force of a pleasant first meeting. Yet Arendt’s idea emerges from a kind of contempt for technology and her implied separation between ‘normal’ and what could be called ‘technical’ language suggests that she privileges the lay ‘human’ tongue as the only one in which meaningful ideas can be properly expressed. What this fails to acknowledge is an appreciation of the potential richness of technical language and Arendt instead establishes a hierarchy that privileges one’s ‘natural’ language. The invocation of the term ‘normal’ is itself an admission of unequal relations with technologies. For a language to develop in which we can truly begin to express and understand the human relationship with ever-changing but ever-present technologies,, we must first allow the entrance of the language of technology into social life – it must be incorporated, learnt or translated. In the future, this might ultimately give technology a voice in a dialogue that might be half-composed of binary code. Digital culture is perhaps a forerunner of such a conversation and perhaps it is in the milieu of outer space that it could be possible to see advances in our ideas about the mutually co-constitutive relationship between the human and technical. The ongoing extra-planetary extension of the digital cultures have the productive potential to sculpt the material and social ambits of our world, and it is this capacity that may precipitate beginnings which will leave lasting imprints upon the prospects of our shared post-human futures. References Arendt, Hannah. The Human Condition. 2nd ed. Chicago: University of Chicago Press, 1958. Blanchot, Maurice. Friendship. Trans. Elizabeth Rottenberg. Stanford: Stanford University Press, 1997. Originally published in French in 1971 under the title L’Amitié. Fuller, Matthew. Media Ecologies: Materialist Energies in Art and Technoculture. Cambridge, MA: MIT Press, 2005. Gillespie, Tarleton, Pablo J. Boczkowski, and Kirsten A. Foot (eds.). Media Technologies: Essays on Communication, Materiality, and Society. Cambridge, Massachusetts: MIT Press, 2014. Gonzalez, Rafael, and Richard E. Woods. Digital Image Processing. 2nd ed. New Jersey: Prentice Hall, 2002. Hadfield, Chris. “Space Oddity.” YouTube, 12 May 2013. 10 Aug. 2015 ‹https://www.youtube.com/watch?v=KaOC9danxNo›. Hall, Eldon C. Journey to the Moon: The History of the Apollo Guidance Computer. Reston: American Institute of Aeronautics and Astronautics, 1996. Hardt, Michael, and Antonio Negri. Commonwealth. Cambridge, MA: Harvard University Press, 2009. Heavens-Above. ‹http://www.heavens-above.com›. Horst, Heather, and Daniel Miller. Digital Anthropology. London and New York: Berg, 2012. Kirschenbaum, Matthew. Mechanisms: New Media and the Forensic Imagination. Cambridge, MA: MIT Press, 2008. Knoblauch, Max. “The 8 First Social Media Posts from Space.” Mashable 13 Aug. 2013. ‹http://mashable.com/2013/08/13/space-social-media-firsts/›. NASA. “High Definition Earth-Viewing.” ‹http://www.nasa.gov/mission_pages/station/research/experiments/917.html›.NASA. “Optical Payload for Lasercomm Science (OPALS).” 13 May 2015. ‹http://www.nasa.gov/mission_pages/station/research/experiments/861.html›. NASA. “Robonaut Homepage.” ‹http://robonaut.jsc.nasa.gov/default.asp›. Parikka, Jussi. “Dust and Exhaustion: The Labour of New Materialism.” C-Theory 2 Oct. 2013. ‹http://www.ctheory.net/articles.aspx?id=726›. Potter, Ned. “How Chris Hadfield Conquered Social Media from Outer Space.” Forbes 28 Jul. 2013. ‹http://www.forbes.com/sites/forbesleadershipforum/2013/06/28/how-chris-hadfield-conquered-social-media-from-outer-space›. Shukman, David. “NASA Emails Spanner to Space Station - Analysis.” BBC News 19 Dec. 2014. ‹http://www.bbc.com/news/science-environment-30549341›. Simondon, Gilbert. On the Mode of Existence of Technical Objects. Paris: Aubier, Editions Montaigne, 1958. Trans. Ninian Mellamphy. University of Western Ontario, 1980. Stiegler, Bernard. Technics and Time 1: The Fault of Epimetheus. Stanford: Stanford University Press, 1998.