Relevant bibliographies by topics / Průmyslové stroje

Contents

  1. Dissertations / Theses
  2. Conference papers

Academic literature on the topic 'Průmyslové stroje'

Author: Grafiati
Published: 28 June 2021
Last updated: 7 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Průmyslové stroje.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Dissertations / Theses on the topic "Průmyslové stroje"

1

Žíla, Jakub. "Návrh rotoru synchronního reluktančního stroje spouštěného ze sítě pro průmyslové aplikace." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2019. http://www.nusl.cz/ntk/nusl-401976.

Full text
Abstract:
This diploma thesis deals with design of rotor of synchronous reluctance machines. There is a theoretical description of rotor geometry of synchronous reluctance machine that respects natural flow of magnetic flux inside complete rotor. The parametric model of rotor is made with usage of ANSYS Maxwell and Matlab software. Furthermore, the parameters of the machines are confirmed using the same program. Finally, changes of motor parameters are observed in connection with different rotor geometries.
APA, Harvard, Vancouver, ISO, and other styles
2

Barák, Michal. "Organizační struktura firmy produkující zemědělské stroje." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-232186.

Full text
Abstract:
The thesis contains a theoretical analysis of the organizational structure of the company producing agricultular machinery. There is a description of the various company departments through the presentation of the product range to its main production processes. The practical part of the waste management solutions based on long-term statistics. Logistics and economic visions are presented in the final chapters.
APA, Harvard, Vancouver, ISO, and other styles
3

Hadraba, Petr. "Kmitání strojů v průmyslové praxi." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-318140.

Full text
Abstract:
The vibration analysis of a production machine is a key factor of its functionality, service life and occupational safety. This work deals with mathematical dynamic modelling and its contribution to the improvement of a mechanical design and mechanism failure prevention. The whole process is presented on the example of a drum cam rotary indexing table and on the example of actuators of multi spindle automatic lathes. The analysis consisted of complex nonlinear models based on basic linear models. It was computed using Matlab, Simulink and MSC ADAMS. Models of these mechanisms were validated with experimental measurements. The results were used for mechanical design improvement and for speed control optimization.
APA, Harvard, Vancouver, ISO, and other styles
4

Marcoň, Petr. "Komunikační rozhraní a rozhraní člověk-stroj pro průmyslové senzory." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2009. http://www.nusl.cz/ntk/nusl-217994.

Full text
Abstract:
This thesis describes the possibilities of local and remote sensors configuration. Summary overview of the most common Fieldbus and protocols for remote configuration is performed. The focus is mainly dedicated to the HART protocol that is analyzed from the physical layer to the application layer. Circuit diagram and printed circuit board (PCB) of smart sensor with thermistor probe Pt1000 was designed. The HART protocol allows the smart sensor parameters setting as well. The functionality of remote configuration was tested in HARTWinConf program. The control elements for local sensor configuration, such as buttons, matrix keyboards and touchscreens, are described in the following chapter. Representation of the measurement values on display module is introduced too. The most important parameters and aspect of character LCD, graphics LCD and OLED displays are described in greater details. The DD12864YO-3A OLED display was selected to use with designed temperature smart sensor module. The display shows the loop current, the percentage of current range and the primary value - temperature. As the last step the EMI and EMS tests for all modules were performed.
APA, Harvard, Vancouver, ISO, and other styles
5

Škodová, Nina. "Design průmyslového planetového mixéru." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-318763.

Full text
Abstract:
The diploma thesis is focused on the design of an industrial planetary mixer with a volume of 40 liters. The goal is to create a design that takes account of ergonomics and design and technology requirements.
APA, Harvard, Vancouver, ISO, and other styles
6

Juračka, Lukáš. "Průmyslový areál AQUASYS - stavebně technologický projekt." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2012. http://www.nusl.cz/ntk/nusl-225378.

Full text
Abstract:
This Master’s thesis deals with the technological project of building an industrial complex AQUASYS in Žďár nad Sázavou. This work includes technical reports ZS and STP, site equipment, wider transport relations, budget calculation, time planning, inspection and test plan, mechanical assembly, contract for work and job security for this building.
APA, Harvard, Vancouver, ISO, and other styles
7

Baláková, Marie. "Návrh pracoviště s průmyslovým robotem pro zakládání objektů do soustruhu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-318130.

Full text
Abstract:
This diploma thesis deals with the design of a workplace concept for the purpose of machining semifinished bolts used in automotive industry. The workplace includes a special purpose machine, input and output slip and robotic handling. Layout of the workplace is also part of the work. Further, the work is focused on the specific design of the special purpose machine and the 6th-axis robot gripping end effector is more detailed.
APA, Harvard, Vancouver, ISO, and other styles
8

Tvardek, Michal. "Návrh automatizovaného měřicího pracoviště s průmyslovým robotem." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230961.

Full text
Abstract:
This master's thesis focuses on the use of the Renishaw's Equator gauging system in cooperation with the industrial robot. The target is to design the robotized workcell which contains these two products. Robot acts as a manipulator for inserting and sorting out the workpieces into the "good" and "bad" pallets according to measured results from the Equator. Equator uses a parallel kinematics and probing system which is normally used on coordinate measuring machines. Therefore there is the introduction to the parallel and serial kinematic structures, to the problems of the coordinate measuring machines in the first part of this thesis. It was made a separation of the probing systems into a few basic categories, description of the typical representatives of these categories and of the other important accessories of the coordinate measuring machines, too. The second part of the thesis contains a description of the Equator gauging system, the industrial robot which I used and their accessories. In this part is mentioned a few examples of measurement automation in industry practice, too. The third part devotes to the design of the robotized workcell and contains all the important requirements for the realization.
APA, Harvard, Vancouver, ISO, and other styles
9

Mišinger, Lukáš. "Zlepšování provozních vlastností kluzného kontaktu." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-219261.

Full text
Abstract:
This master's thesis is focused on comparison of various conception of slide contacts. Studies of this theme are based on laboratory models and consequential experiments and measurements to the application of innovated slide contacts. The innovation is based on application Teflon on the slide contact's components. In this project there are presented results from measurements with application of innovated brushes „sT“, brush holders with „sT“ and new conception of slide contact with auxiliary teflon brush on DC machine. Next part is about innovation of trolley-bus traction collector, which was used on trolley-bus and results of its laboratory experiments. The last part presents results of long term experiments with "sT" technology, which was applicated in a few variants of industrial usage.
APA, Harvard, Vancouver, ISO, and other styles
10

Vavrík, Michal. "Návrh a implementace řídícího programu pro CNC obráběcí stroj prostřednictvím B&R Automation." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-416642.

Full text
Abstract:
The aim of the diploma thesis is the robotization of a conventional milling machine to a CNC milling machine using a programmable logic controller. The theoretical part of the thesis contains a description of machine tools and industry 4.0, an overview of Optimum Maschinen and B&R Automation companies, including products, and a description of the G code programming language. At the beginning of the practical part, the selected hardware, its connection and tuning of motors are described. Furthermore, the practical part explains the method of motor control and processing of CNC programs in G code. The following chapters discuss the creation of industrial visualizations for machine control and digital twin for testing purposes. The conclusion describes the evaluation of the results and indicates the possibilities for future expansion of the machine and its implementation in an automated cell in the sense of industry 4.0.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Conference papers on the topic "Průmyslové stroje"

1

Basl, Josef, and Edl Milan. "Průmysl 4.0 a modifikace studijních programů na Fakultě strojní ZČU Plzeň." In Průmyslové inženýrství 2020. Západočeská univerzita, 2020. http://dx.doi.org/10.24132/pi.2020.09693.024-030.

Full text
Abstract:
Příspěvek se zabývá tématikou průmyslu 4.0 a jejím využitím v rámci přípravy a výuky studentů Fakulty strojní ZČU Plzeň. Představuje směry dalšího rozvoje, který se promítá do modifikace předmětů a formulaci nového studijního programu „Inteligentní výrobní systémy“. Tato aktivita fakulty využívá výstupy projektu TL 01000081 financovaného Technologickou agenturou České republiky s názvem „Proměna role vysoké školy a inovace studijních programů v rámci fenoménu 4.0 v oblastech strojních, pedagogických a zdravotnických“.
APA, Harvard, Vancouver, ISO, and other styles
2

Ženíšek, David, and Michal Šimon. "Analýza poruch pomocí Power BI." In Průmyslové inženýrství 2020. Západočeská univerzita, 2020. http://dx.doi.org/10.24132/pi.2020.09693.230-236.

Full text
Abstract:
Tento článek popisuje případovou studii využití nástroje Power BI od Microsoftu k analýze poruch strojů ve výrobě. Článek nejprve představí nástroj Power BI, následně uvede data, která jsou v podniku generována a se kterými se bude pracovat. Nakonec bude představeno řešení, vytvořené v Power BI sloužící k automatizované analýze a reportingu dat.
APA, Harvard, Vancouver, ISO, and other styles
3

Kliment, Marek, Miriam Pekarčíková, Ladislav Rosocha, Štefan Král, and Tomáš Švantner. "Tvorba projektu výrobnej haly a overenie layoutu výroby uplatnením simulačných prostriedkov." In Průmyslové inženýrství 2020. Západočeská univerzita, 2020. http://dx.doi.org/10.24132/pi.2020.09693.070-076.

Full text
Abstract:
Mnoho podnikov rieši oblasť rozmiestnenia a umiestnenia výroby. Príspevok je zameraný na činnosť výrobnej spoločnosti, ktorá sa rozhodla vybudovať nové výrobné priestory. V týchto priestoroch chce zjednotiť výrobu, ktorá bola doposiaľ rozdelená na dve samostatné funkčné jednotky. Ide o strojársku spoločnosť pôsobiacu v kusovej a malosériovej výrobe. Umiestnenie strojov je preto potrebné starostlivo zvážiť a výrobu sa snažiť urobiť čo najviac plynulou, ako pre zákazky malého aj väčšieho objemu. V príspevku je spracovaný postup jednotlivých činností, ktoré budú zahŕňať realizáciu myšlienky výstavby novej výrobnej haly od jej začiatku až po zahájenie výroby. V stručnosti popisuje aj prostriedky ktoré boli využité pri projektovaní tejto haly.
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Průmyslové stroje' for particular source types:
Dissertations / Theses
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography