Relevant bibliographies by topics / Projektová výroba

Contents

  1. Dissertations / Theses

Academic literature on the topic 'Projektová výroba'

Author: Grafiati
Published: 28 June 2021
Last updated: 4 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Projektová výroba.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Dissertations / Theses on the topic "Projektová výroba"

1

Pokorný, Zdeněk. "Návrh tvorby výrobní koncepce pro funkce řízení výrobního procesu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-443157.

Full text
Abstract:
The Master’s thesis deals with the approaches to the introduction of the principles of lean manufacturing and especially the concept of Just in Time (JIT). It is structurally divided into theoretical and practical part. While the theoretical part focuses on the theory of lean manufacturing and the details about steam turbines, the practical part gradually deals with the introduction of the company, production portfolio, supplier analysis and especially the production process. The practical part ends with the selection of proposals for changes in the production concept, including partial economic evaluations with regard to customer requirements to meet delivery dates, quality and required costs.
APA, Harvard, Vancouver, ISO, and other styles
2

Starý, Petr. "Výroba plechu držáku projektoru." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-416446.

Full text
Abstract:
The diploma thesis presents technology production design of a data projector bracket made of 2 mm thickness 11 321 steel plate. Considering the large production quantity and maximum tolerable deviations, a progressive die tool along with cutting and bending was chosen as the optimal solution for this type of production, based on a variant solution. Technological aspects were assessed, the production process was established, and technological and control calculations were performed. According to the total forming force of 2 000 kN, the LDC 250 mechanical press with a nominal force of 2 500 kN, manufactured in Šmeral Brno a.s., was chosen to meet the production requirements. The chosen material in a form of metal sheet coils will be supplied to the machine by a feeding device. The article will be manufactured in six steps. Based on technical-economic evaluation, the final price of a single piece in a series of 250 000 pieces per year was set at 30,80 Kč.
APA, Harvard, Vancouver, ISO, and other styles
3

Mayerbergová, Ilona. "Studie operativního řízení výroby." Master's thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2012. http://www.nusl.cz/ntk/nusl-223462.

Full text
Abstract:
The goal of this diploma thesis is to use the principles of lean manufacturing to lean workplace and eliminate all forms of waste in this workplace. A part of this work is opti-mal design of the workplace in terms of ergonomics which should have a positive effect on shortening lead time and process cycle efficiency. Shortening the lead time will allow company to respond more quickly to customer requirements and this effect may subsequently lead to the drop in inventories.
APA, Harvard, Vancouver, ISO, and other styles
4

Břenek, Lukáš. "Projekt uvedení nového prototypu obráběcího stroje do sériové výroby." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-401022.

Full text
Abstract:
This diploma thesis deals with a topic of project management. The first part is focused on a research behind the theory of project management. In the second part, an analysis of the current state of project management in a selected company producing machine tools is performed first. Then it is followed by a proposal to change the process. In the last part, the individual proposals are then analysed and shown on a real project. These proposals could lead to improvements in productivity and product after implementation.
APA, Harvard, Vancouver, ISO, and other styles
5

Šaroun, Josef. "Projektové řízení výstavby technologického celku." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230034.

Full text
Abstract:
The target of this master thesis is specify the requirements, which come up while summing the investment aim of a new 40MW energetic unit, and show the overall project management. Thesis is divided into two parts. First part deals with project management from the investors point of view. There is also detailed concept study, technological description of piston co-generation units and combined cycle, concept design of calculated variations and their economical analysis. Second part is taken from the point of view of the main supplier. There is defined the range of operations, documents and official permissions needed for successful finish of the civil part of the energetic unit project.
APA, Harvard, Vancouver, ISO, and other styles
6

Exl, David. "Návrh projektu pro řízení zakázkové výroby." Master's thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2014. http://www.nusl.cz/ntk/nusl-224314.

Full text
Abstract:
The content of this master´s thesis is to design a plan for the project to management system implementation of custom manufacturing. The thesis contains the methods and procedures for project management. The thesis includes opportunities study, time analysis, ressource analysis and cost analysis. The thesis also contains risk analysis.
APA, Harvard, Vancouver, ISO, and other styles
7

Benešovský, Radek. "Detailní projektování technologického pracoviště ve firmě KOVO STANĚK s.r.o." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-241732.

Full text
Abstract:
This diploma thesis deals with design of a new production facility for the manufacture of blasting machines in company Kovo Staněk Ltd. The thesis includes analysis and capacity calculations of individual production technologies, design of a building arrangement and economical evaluation of the whole investment.
APA, Harvard, Vancouver, ISO, and other styles
8

Zapletal, Radek. "Prevence chyb na výrobní lince." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229971.

Full text
Abstract:
This thesis deals with risk assessment in the production system on the assembly line in IG Watteeuw ČR s.r.o. company. Using metod FMEA analysis risk of each part of the production system of selected project. Detection of bottlenecks in the project management process and suggest improve of quality.
APA, Harvard, Vancouver, ISO, and other styles
9

Buďa, Vojtěch. "Racionalizační projekt výroby vzduchových filtrů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229915.

Full text
Abstract:
This thesis deals with rationalization layout of air and fuel filters production in the company MANN-HUMMEL (CZ) s.r.o., which ensures minimization of work in process and design optimal load of production on the basis measured and analyzed times operations of production. Part of thesis is the design layouts of workplace with selection of optimal variation which provides shortening and better overview on flow of material production.
APA, Harvard, Vancouver, ISO, and other styles
10

Veverka, Štěpán. "Optimalizace výroby dopravníkových válečků." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229509.

Full text
Abstract:
Presented document deals with optimization in conveyer rollers production in accordance with rationalizing project for Transroll – CZ, s.r.o. company. With consideration of available literature from section of technological projection and technology of machining, the industrial process is analyzed with focus on material flow and layout solution of factory shop. Consecutively the options of possible machines allocation are designed, which eliminate some disadvantages of default position. Selection of suitable option, its evaluation and technical-economic evaluation of whole project are also parts in this document.
APA, Harvard, Vancouver, ISO, and other styles
More sources
You might also be interested in the extended bibliographies on the topic 'Projektová výroba' for particular source types:
Dissertations / Theses
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography