Relevant bibliographies by topics / Profilerad

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Profilerad'

Author: Grafiati
Published: 23 June 2021
Last updated: 12 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Profilerad.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Profilerad"

1

Hartten, Leslie M., Paul E. Johnston, Valerie M. Rodríguez Castro, and Paola S. Esteban Pérez. "Postdeployment Calibration of a Tropical UHF Profiling Radar via Surface- and Satellite-Based Methods." Journal of Atmospheric and Oceanic Technology 36, no. 9 (September 2019): 1729–51. http://dx.doi.org/10.1175/jtech-d-18-0020.1.

Full text
Abstract:
Wind profiling radars are usually not calibrated with respect to reflectivity because such calibrations are both unnecessary for good wind measurements and costly. However, reflectivity from calibrated profilers can reveal many atmospheric attributes beyond winds. Establishing ways to calibrate these radars even after they have been taken out of service would expand the utility of archived profiler data. We have calibrated one operating mode of a 915-MHz profiler deployed at Manus, Papua New Guinea (1992–2001), using two methods. The first method adjusts a radar parameter until the profiler’s estimate of rainfall during stratiform events closely matches surface observations. The second adjusts the parameter so that mean brightband heights observed by the profiler (July 1992–August 1994) match the mean brightband reflectivities over the profiler as observed by the TRMM Precipitation Radar (January 1998–July 2001). The results differ by about 5% and yield very similar precipitation errors during tested stratiform events. One or both of these methods could be used on many other wind profilers, whether they have been decommissioned or are currently operational. Data from such calibrated profilers will enable research employing the equivalent reflectivity factor observed by profilers to be compared with that from other radars, and will also enable turbulent studies with C n2.
APA, Harvard, Vancouver, ISO, and other styles
2

El-Korchi, Tahar, and John Collura. "Comparative Study of Ride Quality Measuring Devices." Transportation Research Record: Journal of the Transportation Research Board 1643, no. 1 (January 1998): 125–35. http://dx.doi.org/10.3141/1643-16.

Full text
Abstract:
State highway agencies (SHAs) in New England have an ongoing interest in providing the public with smoother rides. As an incentive to contractors, some SHAs include a bonus and penalty clause for new construction based on profile measurements and smoothness indices. These states are considering the use of high-speed profilers for profile measurements and quality control/quality assurance implementation. Therefore, an assessment of the accuracy and repeatability of these devices is essential. A comparative study of high-speed profilers owned by the New England SHAs was conducted in Worcester, Massachusetts. Two sites were profiled using the dipstick and the high-speed profiling devices. Statistical analysis of International Roughness Index measurements were used for evaluation of precision and bias, profiler speed, and sensor type. The repeatability for the profilers was good, especially for combined wheel paths (standard deviation between 0.016 and 0.079 m/km). The accuracy for the profilers varied depending on profiler type.
APA, Harvard, Vancouver, ISO, and other styles
3

Runciman, Colin, and Niklas Röjemo. "New dimensions in heap profiling." Journal of Functional Programming 6, no. 4 (July 1996): 587–620. http://dx.doi.org/10.1017/s095679680000188x.

Full text
Abstract:
AbstractFirst-generation heap profilers for lazy functional languages have proved to be effective tools for locating some kinds of space faults, but in other cases they cannot provide sufficient information to solve the problem. This paper describes the design, implementation and use of a new profiler that goes beyond the two-dimensional ‘who produces what’ view of heap cells to provide information about their more dynamic and structural attributes. Specifically, the new profiler can distinguish between cells according to their eventual lifetime, or on the basis of the closure retainers by virtue of which they remain part of the live heap. A bootstrapping Haskell compiler (nhc) hosts the implementation: among examples of the profiler's use we include self-application to nhc. Another example is the original heap-profiling case study clausify, which now consumes even less memory and is much faster.
APA, Harvard, Vancouver, ISO, and other styles
4

Zang, Xiaoya, Zhujun Zhang, and Wei Fan. "A Novel Profiler Driven by Tidal Energy for Long Term Oceanographic Measurements in Offshore Areas." Journal of Marine Science and Engineering 9, no. 5 (May 16, 2021): 534. http://dx.doi.org/10.3390/jmse9050534.

Full text
Abstract:
In this paper, an innovative profiler driven by tidal energy for long-term oceanographic measurements in offshore areas with abundant tidal resources is investigated. The profiler is mainly composed of an oceanographic data collection system equipped with various sensors and a cross-plate that can make an upward or downward movement under the impact of tidal currents. Theoretical research is carried out through static analysis and numerical simulation, mainly studying the hydrodynamic characteristics of the cross-plate and its dynamic response to the current velocity. The theoretical model is verified by comparison with experiments. The research results show that tidal energy can be used as a kind of energy to drive the profiler’s ascent and descent motion and to continuously measure ocean parameters without using electric energy. The theoretical model established in this study can roughly predict the position of the profiler observation platform in the vertical direction under various current velocities. Furthermore, by studying the relationship between the current velocities and the lift and drag forces of the cross-plate in the fluid, it is recognized that the current velocity is an important factor affecting the stability of the system’s motion. It is hoped that this research will contribute to the development of profilers.
APA, Harvard, Vancouver, ISO, and other styles
5

Perera, Rohan W., Starr D. Kohn, and Sohila Bemanian. "Comparison of Road Profilers." Transportation Research Record: Journal of the Transportation Research Board 1536, no. 1 (January 1996): 117–24. http://dx.doi.org/10.1177/0361198196153600117.

Full text
Abstract:
Devices available to measure road profiles vary from the hand-held Dipstick to high-speed, vehicle-based profilers. High-speed, vehicle-based profilers generally use an ultrasonic, laser, or optical measuring system. A profiler calibration study was conducted by the road profiler user group in 1994 by establishing regional calibration centers in Mississippi, Nevada, Pennsylvania, and South Dakota. The study compared the data collected by the profilers with the Dipstick data, and analyzed the effect of surface texture on data collection. At each regional calibration center, asphalt concrete and portland cement concrete test sections were established. Thirty-eight road profilers belonging to state agencies, equipment manufacturers, and FHWA participated in the calibration study. Dipstick measurements and sand-patch tests were conducted at all test sites. The International Roughness Index (IRI) was used as the parameter for performing the analyses. The results of the analyses for the sites in Pennsylvania and South Dakota are presented. The agreement between Dipstick IRI and profiler IRI for a specific profiler varied from site to site. For a specific profiler at some sites, the agreement with the Dipstick IRI was good, while at other sites the agreement was poor. The profilers with ultrasonic measuring systems generally had poor agreement with Dipstick IRI values for asphalt-surfaced sites that had aggregate seal coats.
APA, Harvard, Vancouver, ISO, and other styles
6

Monna, W. A. A. "On the use of wind profilers in meteorology." Annales Geophysicae 12, no. 6 (May 31, 1994): 482–86. http://dx.doi.org/10.1007/s00585-994-0482-9.

Full text
Abstract:
Abstract. As an introduction to this special issue of Annales Geophysicae a review is given of the applicability and performance of wind profilers. In meteorology, wind profilers play an increasingly important role. They can provide upper-wind measurements with an accuracy comparable to radiosonde data, but with a significantly higher temporal resolution. Height coverage and vertical resolution depend on the operating frequency, which, depending on the application, is usually chosen to be around 50, 400 or 1000 MHz. Measurements from stand-alone profilers in sparse data areas as well as data from wind profiler networks - which have increased the spatial resolution of an existing radiosonde network - have shown a positive impact on numerical weather forecasting. Information from nearby profilers can help the individual meterologist to optimize local short-term weather forecasts. In atmospheric research, wind profilers have been used for various boundary layer studies. In several mesoscale monitoring experiments wind profilers have played an important role. In Europe the development and implementation of wind profiler networks have been supported since 1987 by the CEC-sponsored COST-74 project. A follow-up project will probably start in 1994. Several topics deserve attention. A further assessment of the quality of wind profiler measurements is important. Automatic quality control procedures should be refined. Improved data assimilation techniques in numerical models will enable a better use of the high temporal resolution of wind profiler data. For a cost-effective development and use of wind profilers, the realization of frequency allocations, as globally harmonized as possible, is essential. Finally, the integration of wind profilers with other complementary measuring techniques is important.
APA, Harvard, Vancouver, ISO, and other styles
7

St-James, Judy S., and Stéphane Laroche. "Assimilation of Wind Profiler Data in the Canadian Meteorological Centre’s Analysis Systems." Journal of Atmospheric and Oceanic Technology 22, no. 8 (August 1, 2005): 1181–94. http://dx.doi.org/10.1175/jtech1765.1.

Full text
Abstract:
Abstract Real-time horizontal wind observations from the National Oceanic and Atmospheric Administration’s (NOAA’s) Profiler Network (NPN) are assessed in preparation for their assimilation in the Canadian Meteorological Centre (CMC) analysis systems. As a first step, radiosonde winds from 20 stations were compared to the central U.S. profiler stations over the 2001/02 winter season. It was found that profilers are at least as good as conventional radiosonde data. The 2001/02 winter season data were also used to examine the vertical correlation structure of the observation error for profilers. Using a statistical analysis of innovations, the observation error standard deviation of the wind components is estimated as 2.2 m s−1 and the vertical correlation length is approximately 500 m. These results suggest that the data are vertically correlated because they are available every 250 m. Therefore, a thinning process is proposed in which one out of three data are selected in the vertical for each station. Since January 2004, a close monitoring of NPN profiler data revealed significant errors at some stations in the lower and upper troposphere. Consequently, a monthly blacklist of NPN profilers is built based on data from the previous month. A data impact study with both the three-dimensional variational data assimilation (3DVAR) and four-dimensional variational data assimilation (4DVAR) analysis systems was conducted using data from the 2003/04 winter season in which the vertical thinning was tested. It was found that the vertical thinning improves slightly the 6-h forecast error, especially in the 4DVAR over the central United States in which 6 times more profilers are assimilated. The impact of the vertical thinning is found to be neutral in the 3DVAR. Also, the impact of profiler data is significant over the central U.S. domain compared to a control run with the only difference being the addition of profiler data. These results were sufficiently good to implement NPN profilers in both the CMC global and regional analysis systems with the thinning process in fall of 2004.
APA, Harvard, Vancouver, ISO, and other styles
8

Borelli, Noah, Bouzid Choubane, James Greene, Charles Holzschuher, and James Fletcher. "Cross-Correlation Analysis of Line Laser High-speed Inertial Profilers." Transportation Research Record: Journal of the Transportation Research Board 2674, no. 5 (May 2020): 626–36. http://dx.doi.org/10.1177/0361198120917371.

Full text
Abstract:
Thirteen different line-laser high-speed inertial profilers from four different manufacturers were recently tested at the Florida Department of Transportation (FDOT) Inertial Profiler Test Track. The hot-mix asphalt (HMA) track incorporates both dense and open-graded sections with international roughness index (IRI) values ranging from 34 to 104 in./mi. A cross-correlation analysis was performed on the resulting ride data. The accuracy comparison was performed using a SurPro reference profiler. The profilers as a group met the AASHTO R 56 cross-correlation criteria on each section except on a smooth, open-graded section. The profilers as a group met the repeatability cross-correlation on this section, but did not meet the accuracy cross-correlation requirement. This paper presents a description of the testing program, data collection efforts and subsequent analyses and findings.
APA, Harvard, Vancouver, ISO, and other styles
9

Madžuls, Juris. "SELECTION AND PROFESSIONAL TRAINING OF PERSON PROFILERS IN THE STATE BORDER GUARD OF THE REPUBLIC OF LATVIA." SOCIETY. INTEGRATION. EDUCATION. Proceedings of the International Scientific Conference 6 (May 20, 2020): 689. http://dx.doi.org/10.17770/sie2020vol6.5187.

Full text
Abstract:
The effectiveness of profiling depends directly on the professional skills of the employee – profiler. The special attention should be paid to the selection and training of profilers. Profiling is a matter of state, public or company security and it is not acceptable that accidental person enters the profilers’ community. The aim of the paper is to identify the possibilities of improving the profiler candidates selection system and their professional preparedness in line with current socio-economic, political and migration trends in Europe and in the world. The research was done in the State Border Guard College of the Republic of Latvia. For this purpose analysis and evaluation of documents, scientific, pedagogical and psychological literature was performed and conclusions about the necessity of profiler selection and preparedness processes development were summarized.The author brought forward conclusion that with strict selection criteria and future qualification raising possibility - the special position held – profiler, should be established.
APA, Harvard, Vancouver, ISO, and other styles
10

Barth, M. F., R. B. Chadwick, and D. W. van de Kamp. "Data processing algorithms used by NOAA's wind profiler demonstration network." Annales Geophysicae 12, no. 6 (May 31, 1994): 518–28. http://dx.doi.org/10.1007/s00585-994-0518-1.

Full text
Abstract:
Abstract. The National Oceanic and Atmospheric Administration's (NOAA) Wind Profiler Demonstration Network consists of 32 wind profiling radars, based primarily in the central United States. The network is being used to determine the operational feasibility and characteristics of a possible future nationwide profiler network. Data processing is performed both at the individual profiler sites and at a central hub processing system. This paper documents the algorithms used at the profilers to produce profiles of the moments of the velocity spectrum every 6 minutes, as well as those used on the hub to produce quality-controlled hourly winds.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Profilerad"

1

Cortes, Sebastian. "Profilerad PV-modul AvSammansatta Kiselceller." Thesis, Karlstads universitet, Institutionen för ingenjörsvetenskap och fysik (from 2013), 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-84809.

Full text
Abstract:
I denna rapport presenteras en analys av en profilerad solmodul av sammansatta kiselceller. Syftet med detta är att undersöka effektkurvan och I-V diagram på en denna solmodul vid olika infallsvinklar från ljuskällan för att få en förståelse på förluster gentemot en plan-modell. Genom att konstruera en modell med skurna kiselsolceller utgörs mätningar för att få en representation av effektkurvan. Resultatet skall sedan jämföras med en plan-modell, därefter diskuteras resultaten från bägge modellerna.
APA, Harvard, Vancouver, ISO, and other styles
2

Jonsson, Fredrik. "Lokal möbelproduktion : Profilerad lokal möbelproduktion i Hälsingland." Thesis, Högskolan i Gävle, Design och formgivning, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-28586.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Hübinette, Björn. "Mobil IKT i Skolan : Trender på en IT-profilerad gymnasieskola." Thesis, Uppsala universitet, Kulturgeografiska institutionen, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-158823.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Karlsson, Kristoffer, Maria Olsson, and Jessica Johansson. "Profilerade skolor : marknadsanpassning eller verksamhetsutveckling." Thesis, Högskolan Dalarna, Pedagogiskt arbete, 2006. http://urn.kb.se/resolve?urn=urn:nbn:se:du-2555.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Espinoza, Eduardo. "Elevers utveckling i den matematiska tänkande : Exempel från en fristående skolan profilerad i matematik." Thesis, Södertörn University College, Lärarutbildningen, 2006. http://urn.kb.se/resolve?urn=urn:nbn:se:sh:diva-848.

Full text
Abstract:

The primordial purpose of our studies has been carrying out a detailed research to describe methods or work procedures in the teaching and application of the mathematics, at a school based or alignment on the mathematics instruction. To be able to study the pupils in their development of the mathematical thinking.

We have carried out a detailed investigation, in the previously mentioned school using the ethnography observation methods directly in the place of the facts. Where it was possible to verify that the mathematics lessons were a consequences of the methods or work procedures which made us deduce that this school did every possible effort to stimulate all the pupils to be better and particularly talented pupils individually to develop one’s talent by means of the following results:

· Develop the logical thinking

· The self-critical ability

· The attitude of the teacher/communication

· A positive work atmosphere

· Organization of the school and the class

· Formation of the theoretical knowledge

Keywords

Mathematical thinking.

Pupils

Independent school

APA, Harvard, Vancouver, ISO, and other styles
6

Martincic, Patricia, and Emma Larsson. ""Jag tror det är lättare om man har en profil att gå efter" En jämförelse mellan en profilerad och en ickeprofilerad förskolas arbetssätt." Thesis, Malmö högskola, Lärarutbildningen (LUT), 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:mau:diva-32762.

Full text
Abstract:
Syftet med vår undersökning var att synliggöra två förskolors arbetssätt för att uppnå de strävansmål i Läroplan för förskolan, Lpfö98, som rör estetiska uttrycksformer. Vi ville undersöka om det fanns tydliga skillnader eller om arbetssättet på en musikprofilerad och en ickeprofilerad förskola är likartat. De frågor vi utgick från var Hur arbetar pedagogerna på en profilerad förskola för att nå målen i läroplanen? Hur arbetar pedagogerna på en förskola utan specifik profilering för att nå målen i läroplanen? Vad finns det för skillnader och likheter i dessa arbetssätt? Vi valde att använda oss utav kvalitativa intervjuer och aktiva observationer för att samla in empirin. Vi intervjuade sex pedagoger på två olika förskolor i Skåne. Tidigare forskning och litteratur inom området har vi under arbetets gång inte stött på. Därför utgick vi från olika musikpedagogiska teorier, samt litteratur kring kreativitet och läroplanen, när vi analyserade vår empiri. Vår slutsats blev att de två förskolor vi besökte hade mestadels likartade arbetssätt. Samtliga pedagoger i undersökningen ansåg att pedagogens intresse spelar större roll än en specifik profilering.
APA, Harvard, Vancouver, ISO, and other styles
7

Andersson, Martina. "Barns inflytande i förskolan : är det någon skillnad mellan en Reggio Emilia inspirerad förskola och en icke profilerad förskola? en intervjustudie om fyra förskollärares synsätt på barns inflytande." Thesis, Högskolan i Gävle, Akademin för utbildning och ekonomi, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-11135.

Full text
Abstract:
Detta är ett examensarbete om fyra förskollärares syn på barns inflytande och syftet är att jämföra, en så kallad komparativ studie, Reggio Emilia inspirerade förskolors syn med icke profilerade förskolors. Studien genomfördes i form av intervjuer med fyra förskollärare på två olika icke profilerade förskolor och på två olika Reggio Emilia inspirerade förskolor. Samtliga är kommunala .  Enligt litteratur och forskning som ingår i studien så är barns inflytande och känsla av delaktighet en förutsättning för lärande. Det är också en förutsättning för att barn ska förstå innebörden i begreppet demokrati att de på förskolan introduceras till vad begreppet innebär. Förskolan ska lägga grunden till de demokratiska medborgare som samhället efterfrågar och detta är också utförligt beskrivet i Lpfö 98 som de icke profilerade och Reggio Emilia inspirerade förskolorna följer. Däremot är inte alla förskolor skyldiga att följa gällande läroplan. De enskilt drivna förskolorna har möjlighet att välja om de vill följa läroplanen men de kan också välja att inte använda den. Då gäller istället riktlinjer som kommunen tagit fram. Resultatet av denna studie blev att det inte var så stora skillnader mellan de icke profilerade kontra de Reggio Emilia inspirerade. Det visade sig istället att det fanns mer likheter än skillnader på synsättet på barns inflytande i de fyra förskolorna som deltog i studien. Likheter som trädde fram i resultat var att de var ense om att för att kunna anta barnperspektiv måste man lära känna barnet som individ och lyssna, detta vare sig de jobbade på en profilerad förskola eller inte. Samtliga tyckte att verksamheten bygger på barnen och deras intressen speciellt vid temaarbeten. Att barnen har inflytande är viktigt och att de har möjlighet att välja aktiviteter på förskolan. Olikheterna handlar om hur de två pedagoger som arbetade på de två icke profilerade förskolor som deltog i studien ansåg sig ha bristande resurser när det gäller personal för att kunna arbeta på det sätt de önskade. En av de pedagoger som arbetade på en Reggio Emilia inspirerad förskola ansåg sig däremot ha tillräckliga resurser i form av personal för att kunna arbeta så som de önskade med bland annat mindre grupper och valmöjligheter för barnen ifråga om både utevistelse och innevistelse. De kunde också arbeta med stationer där barnen själva fick välja aktivitet.
APA, Harvard, Vancouver, ISO, and other styles
8

Almroth, Henrik. "Dragbrotschning av invändiga profiler." Thesis, KTH, Industriell produktion, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-91086.

Full text
Abstract:
High-precision cutting in metal is very complicated, a lot of parameters affect the result: what geometries to be manufactured, surface roughness and tolerances to be achieved, batch size etcetera. When pull-broaching internal parts this might be even more important, than in any other cutting operation. Everything is machined in one single stroke and the general technology is built in to the tool, therefore big investments must be made to change the process. Milling for an example: one piece at a time is machined away, and a lot of parameters can be changed easily.It is very high pressure on the cutting-edge when the broach is cutting. To achieve the specified product and to avoid unnecessary toolwear it is essential to use the right cuttingfluid and the right cuttingspeed for an example. An investigating interview has been made at Scania in Södertälje, to see how theory is related to practice. The result was not the expected. One reason might be that found literature in the subject was very old, and another might be that manufacturer of broaches work in secret and do not want to share their advantages so they can keep a market-leading position.
För att kunna utföra precisionsbearbetning av metaller är det många parametrar som spelar in. Vilka geometrier ska framställas, vad ska det vara för ytjämnhet och toleransvidd på den färdiga produkten, hur stor volym ska tillverkas etcetera. Vid dragbrotschning av invändiga profiler är detta om möjligt ännu viktigare än vid annan skärande bearbetning. Allt sker i en övergång och den styrande tekniken sitter i verktyget, för att ändra styrande parametrar måste stora investeringar i nya verktyg göras. Vid exempelvis fräsning bearbetas en bit i taget och processen går att justera på ett annat sätt. När brotschen skär är det en mycket stor kraft på skäreggen. För att kunna erhålla önskat resultat och undvika onödigt slitage på verktyg är det essentiellt att exempelvis skärvätskeflödet är korrekt och att rätt skärhastighet används. En undersökande intervju har genomförts på Scania i Södertälje för att se hur praktiken fungerar gentemot teorin. Det visade sig skilja en del mellan teori och verklighet. En del kan tänkas bero på att den litteratur som funnits i ämnet är relativt gammal och en annan att tillverkare av brotschar tycks arbeta i hemlighet, för att kunna behålla sin ledande position på marknaden.
APA, Harvard, Vancouver, ISO, and other styles
9

Norstedt, Sofia. "ICC-profilers användbarhetvid gråbalansjusteringav arkoffsettryck." Thesis, Högskolan Dalarna, Grafisk teknik, 2003. http://urn.kb.se/resolve?urn=urn:nbn:se:du-3507.

Full text
Abstract:
I detta examensarbete har gråbalansstyrning och ICC-profilers duglighet undersökts. ICC-profilernahar utvärderats utifrån den tryckkvalitet de genererat tillsammans med olika papper.Gråbalansstyrning har använts som gemensamma likare för samtliga testtryckningar. Detta tillfördeen variabel som var lika för samtliga papper i utredningen. Här med ökade sannolikheten att ICCprofilerskapade från olika papper, skulle ge en likvärdig kvalitet.I arbetet har många mätningar och beräkningar genomförts. De två främsta anledningarna till dettavar dels att utreda i vilken mån det gick att gråbalansjustera trycket och dels att inhämta jämförbaravärden på likheter och divergenser mellan olika kombinationer av ICC-profiler och papper. Mätdatahjälpte även till att ta hänsyn till de felkällor som fanns.Det var möjligt att gråbalansjustera trycket och det fanns likheter mellan en ICC-profil på olika papperoch även mellan fler ICC-profiler på samma papper. Samtliga resultat och slutsatser var beroendeav att neutral gråbalans upprätthölls under tryckningarna. Subjektiva och objektiva jämförelser visadebåda på att en ICC-profil inte kommer att påverkas av variationer mellan olika pappersleveranser,såvida dessa inte är större än skillnaden mellan de olika papperna.Med säkerhet kunde inte förutsägas från vilket papper en ICC-profil skulle skapas för att ge en högkvalitet på flera papper. Mest troligt var att likvärdigt resultat skulle kunna uppnås på G-Print, MultiArt Matt och Multi Art Silk.
APA, Harvard, Vancouver, ISO, and other styles
10

Malaguti, Anneli, and Lisa Öhlund. "TV-profiler på TV4 : En studie om hur TV4 arbetar med personliga profiler." Thesis, University of Kalmar, School of Communication and Design, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:hik:diva-1137.

Full text
Abstract:

In the media world today it is important for TV-companies to differentiate since the number  of competitors has increased. The competition is more complex today because of the  possibility to broadcast throughout satellite and cable. As a company you need a strong brand  in order to differentiate the company from the competitors. The brand of media companies are  set by the content of the offer, which means that the program and the people connected to the  television program has an importance for the sake of how people experience the company. For  a commercial TV channel the content is also important because it attracts the viewers and as a  consequence, also attracts the advertisers. In this thesis, we have studied how a Swedish TV  company works with people in order to strengthen its identity and brand and the reason for  this. We have examined a commercial TV company, TV4. The company consists of one big  mainstream channel and several smaller niche channels. To study how they work, we  interviewed five managers from different departments in the organisation. People as brand  identity and the uses and gratification theory gave us a wider understanding of why the  company work with profiles. The results of our study showed that TV4 works with a number  of TV hosts and celebrities in different ways to createa stronger brand. Theseprofiles have  several extensive functionswithin the company. They are the messengers of the identity and  the brand that the company tries to communicate. They symbolise the brand of TV4 for the  viewers and assist in creating an identity for the smaller channels or to attract the viewers. The  results also indicate that the company is aware of various needs the viewers requireand that  the profiles operate to fulfil those needs.Well known profiles create a personal relationship to  the viewers which is one of the reasons why they use profileswithin the establishment. Another reason is that the company believe thatprofiles are important to attract viewers and  be competitive.

APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Profilerad"

1

Copyright Paperback Collection (Library of Congress), ed. The profiler. New York: Silhouette Books, 2005.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Carlson, Bo Kage. Maktens profiler. Stockholm: Natur och kultur, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Turner, Barry, ed. China Profiled. London: Palgrave Macmillan UK, 1999. http://dx.doi.org/10.1007/978-1-349-62560-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

May, Lori A. The Profiler. Toronto, Ontario: Silhouette, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Brown, Pat. The Profiler. New York: Hyperion, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Bjørhovde, Bjørn. Norske SAS-profiler. [Oslo]: DNL/SAS Historielag, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Hammarskiöld, Hans. Hans Hammarskiöld: Profiler. Edited by Olausson Magnus 1956-, Karlsson Eva-Lena, and Nationalmuseum (Sweden) Statens porträttsamling. Stockholm: Nationalmuseum, 2009.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

United States. National Weather Service. Office of Meteorology and Program for Regional Observing and Forecasting Services (U.S.), eds. Profiler training manual #1: Principles of wind profiler operation. Boulder, Colo: The Program, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Brewster, Keith A. Profiler training manual #2: Quality control of wind profiler data. Boulder, Colo: The Program, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

A profiler's case for seduction. Don Mills, Ontario: Harlequin, 2013.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Profilerad"

1

Vilo, Jaak, Misha Kapushesky, Patrick Kemmeren, Ugis Sarkans, and Alvis Brazma. "Expression Profiler." In Statistics for Biology and Health, 142–62. New York, NY: Springer New York, 2003. http://dx.doi.org/10.1007/0-387-21679-0_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Turner, Barry. "Territory and Population." In China Profiled, 2–7. London: Palgrave Macmillan UK, 1999. http://dx.doi.org/10.1007/978-1-349-62560-4_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Turner, Barry. "Key Historical Events." In China Profiled, 28–46. London: Palgrave Macmillan UK, 1999. http://dx.doi.org/10.1007/978-1-349-62560-4_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Turner, Barry. "Chronology." In China Profiled, 46–52. London: Palgrave Macmillan UK, 1999. http://dx.doi.org/10.1007/978-1-349-62560-4_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Turner, Barry. "Cultural Briefing." In China Profiled, 53–60. London: Palgrave Macmillan UK, 1999. http://dx.doi.org/10.1007/978-1-349-62560-4_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Turner, Barry. "Selected Historical and Political Portraits." In China Profiled, 60–63. London: Palgrave Macmillan UK, 1999. http://dx.doi.org/10.1007/978-1-349-62560-4_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Turner, Barry. "Major Cities." In China Profiled, 63–178. London: Palgrave Macmillan UK, 1999. http://dx.doi.org/10.1007/978-1-349-62560-4_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Turner, Barry. "Time Zone Information." In China Profiled, 7. London: Palgrave Macmillan UK, 1999. http://dx.doi.org/10.1007/978-1-349-62560-4_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Turner, Barry. "Regions." In China Profiled, 7–28. London: Palgrave Macmillan UK, 1999. http://dx.doi.org/10.1007/978-1-349-62560-4_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Wilson, Glenn D. "Eysenck Personality Profiler." In Encyclopedia of Personality and Individual Differences, 1530–32. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-319-24612-3_29.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Profilerad"

1

Silva, Arlei, Sara Guimarães, Wagner Meira, and Mohammed Zaki. "ProfileRank." In the 7th Workshop. New York, New York, USA: ACM Press, 2013. http://dx.doi.org/10.1145/2501025.2501033.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Haguenauer, Pierre, Andrés Guesalaga, and Timothy Butterley. "Comparison of atmosphere profilers at Paranal and atmosphere parameters statistics: AOF-profiler, STEREO-SCIDAR, MASSDIMM, LGS-WFS." In Adaptive Optics Systems VII, edited by Dirk Schmidt, Laura Schreiber, and Elise Vernet. SPIE, 2020. http://dx.doi.org/10.1117/12.2562267.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kandel, Sean, Ravi Parikh, Andreas Paepcke, Joseph M. Hellerstein, and Jeffrey Heer. "Profiler." In the International Working Conference. New York, New York, USA: ACM Press, 2012. http://dx.doi.org/10.1145/2254556.2254659.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

San Martin, Raul, and John P. Knight. "Power-profiler." In the 32nd ACM/IEEE conference. New York, New York, USA: ACM Press, 1995. http://dx.doi.org/10.1145/217474.217504.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Jang, Jae-wook, Jaesung Yun, Jiyoung Woo, and Huy Kang Kim. "Andro-profiler." In the 23rd International Conference. New York, New York, USA: ACM Press, 2014. http://dx.doi.org/10.1145/2567948.2579366.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Murtaza, Ghulam, and Theophilus A. Benson. "WebOpt Profiler." In CoNEXT '20: The 16th International Conference on emerging Networking EXperiments and Technologies. New York, NY, USA: ACM, 2020. http://dx.doi.org/10.1145/3426746.3434050.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Jagroep, Erik, Jan Martijn E. M. van der Werf, Slinger Jansen, Miguel Ferreira, and Joost Visser. "Profiling energy profilers." In SAC 2015: Symposium on Applied Computing. New York, NY, USA: ACM, 2015. http://dx.doi.org/10.1145/2695664.2695825.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Ackley, Margot H., and Kenneth S. Gage. "NOAA profiler network and other emerging global profiler networks." In Third International Asia-Pacific Environmental Remote Sensing Remote Sensing of the Atmosphere, Ocean, Environment, and Space, edited by Christian D. Kummerow, JingShang Jiang, and Seiho Uratuka. SPIE, 2003. http://dx.doi.org/10.1117/12.466548.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Tang, Huimin, Shuaiqiang Liu, Hualing Luo, and Weitao Hou. "Unsteady Effects of Profiled Endwalls on a 1.5 Stage Axial Turbine." In ASME Turbo Expo 2015: Turbine Technical Conference and Exposition. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/gt2015-43871.

Full text
Abstract:
Using a profiled endwall is an effective method to reduce secondary losses in axial turbines. This approach has been widely investigated in the past decade on many real engines. Much of the previous analysis, however, was conducted in a steady state, with mixing plane conditions where the effects of unsteady interaction between inter-blade rows could not be taken into account. Since a profiled endwall has notable influences on the secondary flow and trailing shed vorticity, it is unavoidable that the profiled endwall may also alter the unsteady flow field. Previously, we executed an optimization procedure [27] to design profiled endwalls for a one-and-half stage, high work axial turbine. Steady state results indicate an improvement in stage efficiency due to profiled endwalls on both the stator one and rotor one. In this work, the effects of profiled endwalls on the turbine unsteady flow features have been analyzed by conducting unsteady simulations. Numerical results indicate that profiled endwalls on the upstream stator not only reduce the secondary loss and trailing edge shed vorticity of the stator, but also reduce the secondary losses of the downstream rotor by affecting the development of the passage vortex. However, a profiled endwall on a rotor has nearly no influence on the upstream stator performance. Transient results indicate that with the profiled endwalls of S1, the periodic fluctuations of flow fields are reduced, due to a weaker stator/rotor unsteady interaction. With profiled endwall of R1, the fluctuations of a flow fields become stronger over time, which means a profiled endwall of R1 can introduce significant unsteady effects to the turbine. Unsteady effects of profiled endwalls will be experimentally confirmed before this design is applied to a real turbine.
APA, Harvard, Vancouver, ISO, and other styles
10

Purnomo, Budirijanto, Norman Rubin, and Michael Houston. "ATI Stream Profiler." In ACM SIGGRAPH 2010 Posters. New York, New York, USA: ACM Press, 2010. http://dx.doi.org/10.1145/1836845.1836904.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Profilerad"

1

Langebrake, Lawrence, Robert Weisberg, and Robert Byrne. Bottom Stationed Ocean Profiler. Fort Belvoir, VA: Defense Technical Information Center, September 2000. http://dx.doi.org/10.21236/ada609788.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Gregg, Michael C., and Jack B. Miller. Modular Microstructure Profiler (MMP). Fort Belvoir, VA: Defense Technical Information Center, September 2007. http://dx.doi.org/10.21236/ada605602.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Riedel, M., J. K. Hong, K. Conway, D. S. Shin, S. Kim, H. J. Kim, H K Choi, et al. Sub-bottom profiler survey. Natural Resources Canada/ESS/Scientific and Technical Publishing Services, 2015. http://dx.doi.org/10.4095/295967.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Weisberg, Robert, Robert Byrne, and Chad Lembke. Bottom Stationed Ocean Profiler. Fort Belvoir, VA: Defense Technical Information Center, August 2002. http://dx.doi.org/10.21236/ada629084.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Weisberg, Robert, Robert Byrne, and Chad Lembke. Bottom Stationed Ocean Profiler. Fort Belvoir, VA: Defense Technical Information Center, September 2001. http://dx.doi.org/10.21236/ada625219.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

King, E. L., H. J. Kim, S. Kim, and J. H. Jung. Sub-bottom profiler survey. Natural Resources Canada/ESS/Scientific and Technical Publishing Services, 2018. http://dx.doi.org/10.4095/308401.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Hong, J. K., H. J. Kim, I. Lee, and C. Kim. Sub-bottom profiler (SBP) survey. Natural Resources Canada/ESS/Scientific and Technical Publishing Services, 2016. http://dx.doi.org/10.4095/297871.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Barnard, Andrew H. The Miniaturized Autonomous Moored Profiler. Fort Belvoir, VA: Defense Technical Information Center, July 2004. http://dx.doi.org/10.21236/ada425917.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Mondal, Amit, Adam Hand, and David Ward. Evaluation of Lightweight Non-Contact Profilers. West Lafayette, IN: Purdue University, 2000. http://dx.doi.org/10.5703/1288284313210.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Maxion, R. A., K. M. Tan, S. S. Killourhy, and T. N. Townsend. Profiler-2000: Attacking the Insider Threat. Fort Belvoir, VA: Defense Technical Information Center, September 2005. http://dx.doi.org/10.21236/ada439600.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Profilerad' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography