Dissertations / Theses: 'Production Environmental aspects'

1

Revheim, Lars Petter Rein. "Energy and Environmental Aspects of an FPSO for LNG Production." Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for energi- og prosessteknikk, 2009. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-12880.

Full text

Abstract:

The floating production unit HLNG FPSO-1 has been evaluated with respect to its energy consumption and emissions to air, and improvement potentials within the same context have been suggested. The thesis describes theory of combustion of natural gas, emission calculations, energy consumption of compressors and theory of fuel gas consumption for gas turbines. A literature study of LNG processes suitable for offshore applications has also been included. The CO2 emissions from the HLNG FPSO-1 add up to about 6% of the CO2 emissions from the Norwegian oil and gas industry (2005), which is a noticeable amount. However the energy content in the LNG produced over one year from the FPSO-1 count for ca 35% of the yearly energy consumed related to oil and gas extraction on the Norwegian continental shelf. This illustrates that even though floating LNG production is energy intensive and the resulting amounts of greenhouse gas emissions (as CO2) are substantial, the LNG holds significant amounts of energy, which is a result of the 600-fold reduction in volume when the natural gas is liquefied. Two different availabilities of the topside processes FPSO-1 exist and are calculated by Det Norske Veritas. The lower availability is based on a no-flare philosophy, which is considered not to be relevant for the project in the further development. The reason for this is that a strict no-flaring philosophy is not desirable from an operational point of view, and that duplication of every equipment item which handles hydrocarbon streams is not a realistic design alternative. Therefore the higher availability which allows some flaring during normal production is used for all the suggested improvement potentials. Based on two different future oil prices (a high and low scenario), the value of the LNG produced, as well as the value of the additional LNG produced as a result of higher availability of the FPSO-1 are calculated. Two design changes of the LNG liquefaction process as a result of a lighter feed gas composition are described and discussed in the context of energy consumption and emissions to air. Both design changes have the possibility of saving more than 10 MW power in total. Also, the implications of eventual necessary compliance with the Equator Principles are discussed. The project may find that certain guidelines or philosophies given by institutions financing parts of the project must be followed (such as use of Best Available Technology), and should evaluate these eventual restrictions when financial institutions are selected for the project. The further development of the project with the goal of making the topside processes on the FPSO-1 as energy efficient as possible (thereby saving operational costs and reducing the impact on the environment), should evaluate the feasibility of implementing the design changes suggested in the thesis from a more extensive technical and economical point of view.

APA, Harvard, Vancouver, ISO, and other styles

2

Kimm, Nicola Karin. "Economic and Environmental Aspects of Integration in Chemical Production Sites." [S.l. : s.n.], 2008. http://digbib.ubka.uni-karlsruhe.de/volltexte/1000009071.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Yu, Chuan, and 余川. "Life cycle analysis of different feedstocks of biodiesel production." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2012. http://hub.hku.hk/bib/B49618027.

Full text

Abstract:

The scarcity of fossil fuel and its environmental impact have shifted the world focus on green innovations At a time when the use of fossil fuel means increasing energy scarcity and an environmental crisis in the world in which we live, we need green innovations now more than ever. Growing attention has been drawn to the use of biofuels, such as bioethanol and biodiesel, which have gradually come to make up part of the total energy supply. Uncertainties about the environmental and ecological aspects of the production and consumption of biofuel still exist despite its rapid development. A life cycle analysis (LCA) evaluates the two principal functional parameters 1) energy efficiency and 2) Greenhouse Gas (GHG) balance of different feedstocks for biodiesel production from the cradle to the grave. By accounting a life cycle analysis stage by stage, we can ascertain the change in GHG emissions and energy demand that result from the various uses of feedstocks for the production of biodiesel. In this thesis, various life cycle analysis models are reviewed and evaluated with emphasis on specific biofuels. Different LCA models depend on different LCA calculation under different situations, including GREET, LEM, SimaPro, etc. The software SimaPro was used to compare the life cycle GHG emissions and energy demand from conventional petroleum fuels and several hydro-processed renewable green diesels. A consistent methodology was used for selected fuel pathways to facilitate relatively equitable comparisons. The building of life cycle flow tree in SimaPro combined the input and output with an emphasis on the following stages 1) raw material farming and acquisition, 2)liquid fuel production, 3)transport, 4)refueling, 5)liquid fuel conversion to biodiesel and 6) end uses. Consistent impact assessment methods were chosen for simulation, equitable comparisons and comprehensive analysis of selected fuel pathways for the calculation of Global Warming Potential (GWP) and Cumulative Energy Demand (CED). However, the results of the entire lifetime estimates vary dramatically in production chains, which make it difficult to take a holistic view about energy intake and yields, economic costs and values, environmental impacts and their benefits. Apart from the diversity in system boundaries and life cycle inventories, a variance in terminologies and the limitations of interdisciplinary communication are the main factors that affect the quality of the results.
published_or_final_version
Mechanical Engineering
Master
Master of Philosophy

APA, Harvard, Vancouver, ISO, and other styles

4

Coulter, Stewart. "Reducing environmental impact through systematic product evolution." Diss., Georgia Institute of Technology, 1998. http://hdl.handle.net/1853/17932.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Biehl, Markus. "The value of clean manufacturing strategies for manufacturing management under the influence of environmental policy." Diss., Georgia Institute of Technology, 1998. http://hdl.handle.net/1853/30330.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Aschner, Andrew Mechanical &amp Manufacturing Engineering Faculty of Engineering UNSW. "Planning for sustainability through cleaner production." Awarded by:University of New South Wales. School of Mechanical and Manufacturing Engineering, 2004. http://handle.unsw.edu.au/1959.4/20669.

Full text

Abstract:

The concept of sustainable development is receiving a great deal of attention in industry. However, the operational processes for industrial environmental management are still at an early stage of development and despite the best efforts of operations management and environmental specialists a great many products and services continue to be unsustainable. This presents threats to society and risks for survival to manufacturers. The purpose of the Thesis is to accelerate environmental improvements through the uptake of Cleaner Production concepts by developing a methodology for guiding manufacturing enterprises. The tenets of the proposed methodology include: o oo Reliance on a strategic approach ooo Development of an implementation path similar to those used in introducing other major culture and technology changes ooo Culture and policy change are strategically generated from within manufacturing organisations Specifically, the main objectives of the Project are: 1. to invent a relatively easily implementable methodology for planning for sustainability for manufacturing enterprises of all sizes 2. to address the major industrial environmental management issues at all levels within the enterprise as one seamless process 3. to configure the methodology so that it may be incorporated into an existing body of knowledge, e.g., manufacturing management/manufacturing engineering 4. to minimise complexities by standardising key concepts and terminology The Thesis integrates Sustainability and Cleaner Production concepts, systems and technologies and performance indicators with a planning model to arrive at what has been termed as " the Strategy Development and Implementation with Cleaner Production" process. This solution addresses the key point of integrating Cleaner Production concepts ii with the manufacturing planning processes, but just as importantly, it also establishes the links between the steps from strategy initiation through to implementation, from the boardroom down to the factory floor. The main modules of the work are: o oo establishing relationships between strategic, business and manufacturing plans using the concepts of Sustainability, Eco-efficiency and Cleaner Production ooo development of links between planning and operations using the concepts of Industrial Ecology and Life Cycle Management ooo development of a classification system, referred to as a Cleaner Production toolkit, to promote optimum selection of hard and soft systems and technologies ooo development of appropriate Cleaner Production Indicators to complete the loop.

APA, Harvard, Vancouver, ISO, and other styles

7

Wilgenbusch, Brian. "Developing an information management system for an environmental and economic monitoring system." Thesis, Georgia Institute of Technology, 2001. http://hdl.handle.net/1853/17331.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Page, Andre Paul. "The barriers and opportunities of resource efficiency and cleaner production within a South African context." Thesis, Cape Peninsula University of Technology, 2017. http://hdl.handle.net/20.500.11838/2800.

Full text

Abstract:

Thesis (MTech (Business Administration))--Cape Peninsula University of Technology, 2017.
This research study investigates how environmental tools such as Resource Efficiency and Cleaner Production (RECP) can contribute to sustaining and supporting economic growth in South Africa. Resource optimisation is crucial when considering the concept of sustainable development. It also contributes to addressing the challenges of global warming and climate change, which in turn threaten industrial growth and sustainability in the long term. The study places emphasis on the barriers that prevent industry from implementing RECP recommendations, and identifies opportunities that could potentially reposition businesses should they consider implementation. It also promotes other sustainability tools that are available through collaboration with international entities, and this could be of great benefit to the South African industry. Factors of unemployment and urbanisation restricts national growth to some degree, hence the study explores how RECP can contribute to job retention by introducing new resource optimisation methodologies for the manufacturing sector, Moreover, it examines the imbalance between the demand as well as limitations of these resources. Through the compilation of data collated from questionnaires completed by industry, government and civil society participants, this study looks at achieving a balance between environmental sustainability and growth. It also looks at aligning this balance with the integration of specific economic and environmental policies, which also includes social aspects. What comes through significantly in this research is the lack of awareness within industry in terms of RECP, as well as the importance of prioritising the uptake of environmental initiatives to ensure that industry is compliant with the stringent policies and legislation designed by government to drive the sustainability process. Consequently the study shows that communication between public and private sector, as well as the awareness raising and marketing of sustainability to consumers need to be improved. An analysis of the various government support mechanisms is conducted, in respect of how industry could potentially leverage growth and drive positive change within their businesses. In addition to RECP, emphasis is placed on other Sustainable Consumption and Production (SCP) initiatives and tools that could possibly entrench sustainable practices and help with their incorporation into their business strategies.

APA, Harvard, Vancouver, ISO, and other styles

9

Flanagan, Mark Steven. "Environmental and agronomic aspects of municipal solid waste heavy fraction used for turfgrass production." Diss., This resource online, 1991. http://scholar.lib.vt.edu/theses/available/etd-07282008-134805/.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Chan, Tak-him, and 陳德謙. "From international regulation to green production: continuous challenges to our textile and clothingindustry." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 1996. http://hub.hku.hk/bib/B43893648.

Full text

APA, Harvard, Vancouver, ISO, and other styles

11

Chow, Kwok-on Desmond, and 周國安. "The environmental improvement due to the relocation of base load gas production plant from Ma Tau Kok to Tai Po industrial estate." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 1994. http://hub.hku.hk/bib/B4257433X.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

Stuart, Julie Ann. "A strategic environmentally conscious production decision model." Diss., Georgia Institute of Technology, 1996. http://hdl.handle.net/1853/24160.

Full text

APA, Harvard, Vancouver, ISO, and other styles

13

Muller, Johannes Christoffel. "Comparative financial and environmental life cycle assessment of three South African pork production chains." Thesis, Stellenbosch : Stellenbosch University, 2015. http://hdl.handle.net/10019.1/96815.

Full text

Abstract:

Thesis (MScAgric)--Stellenbosch University, 2015.
ENGLISH ABSTRACT: The world demand for animal proteins and profit-driven production has led to producing animal proteins intensively. Intensive pork production systems have traditionally had a poor image with the public, because these production systems are associated with environmental pollution. Currently, pigs are produced on highly specialised farms, and are fed concentrated (often imported) pig feed. The resulting higher production and higher animal densities contribute to an increased pollution of water, soil and air. The aim of this study is to determine the energy balance and emissions of three case studies, and to compare these results with their financial performance. The impacts will be recorded in the following impact categories: global warming potential (GWP), acidification potential (AP), eutrophication potential (EP) and Energy Use (EU). The case studies are three typical South African pig production facilities selected by the South African pork producer’s organisation (SAPPO). The production inputs, from the feed acquisition to the delivery of one kg of pig at the farm gate, were included. The three farms are located in different areas in South Africa, namely KwaZulu-Natal province (Case study 1), North-West province (Case study 2) and Western Cape province (Case study 3). The functional unit (FU) for this study is defined as 1 kg of South African pig (live-weight) at the farm gate. This study found that the GWP/FU of Case study 2 is 4 and 2 % higher than Case studies 1 and 3 respectively. The EP/FU of Case study 1 is 9 and 6 % higher than Case studies 2 and 3 respectively. The AP/FU of Case study 1 is 4 and 5 % higher than Case studies 2 and 3 respectively. The EU/FU of Case study 3 is 45 % and 16 % higher than Case studies 1 and 2 respectively. The major activities that contributed to the environmental impact categories were the slurry management activity, followed by electricity usage. The financial and environmental performance comparison did show deviations. Therefore, it is recommended that environmental and financial performance measurements be made, in order to create a true reflection of the impacts. The potential for improvement in financial and environmental performance proved to be significant in the productivity of the sow herd, as well as in the management of the piglets. The location of the production facility does not claim to hold have significant environmental or financial implications. Management of the emissions produced by piggeries can offset the impact of the piggery's location.
AFRIKAANSE OPSOMMING: Nie beskikbaar.

APA, Harvard, Vancouver, ISO, and other styles

14

Pornprasitpol, Pornwan Mechanical &amp Manufacturing Engineering Faculty of Engineering UNSW. "Selective disassembly for re-use of industrial products." Awarded by:University of New South Wales. School of Mechanical and Manufacturing Engineering, 2006. http://handle.unsw.edu.au/1959.4/24274.

Full text

Abstract:

As a result of rapid product development, the product life cycle has become shorter, and thus the amount of waste from discarded industrial products has risen dramatically. An awareness of the world???s environmental problems has stimulated researchers to explore the opportunities to reuse, recycle and remanufacture end-of-life products. Disassembly is a systematic approach to separating products into components or subassemblies in order to facilitate recovery of components or materials. However, the full disassembly of a product tends to be unproductive due to technical and cost constraints and product conditions after usage. Therefore, selective disassembly has been introduced as a more practical approach, where only a limited number of disassembly paths that lead to selected parts with recovering potential are considered. This research focuses on the development of a selective disassembly methodology by reversing an assembly sequencing approach. The methodology uses a step-by-step approach to generate a disassembly sequence diagram. This involves listing all the parts within the product, generating a liaison diagram to illustrate part relationships and then establishing precedence rules describing prerequisite actions for each liaison. This is followed by segregating disassembly paths that lead to the removal of selected parts or subassemblies. Then a winnowing process is applied to these paths to eliminate invalid disassembly states and transitions. The last step is to select the optimal disassembly path by using the time requirement as the main selection criterion. In order to shorten the time for carrying out the sequencing process, a javabased program that is capable of performing the first three steps has been created. The program requires three basic inputs in forms of precedence rules, and user-required part (s) and disassembly rules, prescribing which liaison (s) should be done subsequent to a particular liaison. The viability of the methodology and the program is proved through seven case studies conducted on a fishing reel, a single-hole punch, a kettle, an entire washing machine and three washing machine subassemblies. The application of the program allows the users to determine an optimal disassembly sequence in a very short time and with only basic product information as the input.

APA, Harvard, Vancouver, ISO, and other styles

15

Ellis, Ciaran R. "Valuing wild pollinators for sustainable crop production." Thesis, University of Stirling, 2014. http://hdl.handle.net/1893/22327.

Full text

Abstract:

This thesis looks at the role of wild pollinators in providing services to crops. Two data chapters (2 and 3) are accompanied by a modelling chapter (4) which build on the findings of the field studies. The thesis ends with an overview of the trends in pollinator populations and how these relate to the needs of farmers in the UK (chap-ter 5). It is often assumed that commercial pollinators are appropriate substitutes of wild pollinators on farms; however this view neglects the differing roles that particular pollinator taxa might play in providing pollination services. For example, crops with a long growing system may require multiple pollinators to ensure pollination throughout the season. Strawberries in Scotland have an extremely long growing season, flowering from April to August. Chapter 2 presents a study showing season-al complementarity between different pollinating taxa across strawberry farms in Scotland. Pollinators of strawberries also differed in their responses to weather pa-rameters indicating that preserving multiple pollinator taxa could ensure yields un-der different weather scenarios. The requirements of a long-growing season and ad-verse weather may be specific to strawberry production in Scotland, but the valua-tion of multiple taxa can be generalised to systems with differing needs, and also to different ecosystem services. Wild bees are not only valuable for providing complementary services to commercial pollinators, but are also valuable in the longer term as it is unknown whether com-mercial pollinators will be available in the future. There are threats to the supply of honeybees which have already triggered price rises; such supply shocks could force farmers to leave production or to seek other ways of providing pollination, including supporting wild pollinators. However farm management pressures, in particular pes-ticide use, could threaten the ability of wild pollinators to continue to support crop production. The interplay of pesticides and pollination is discussed in chapter 3 and 4. Chapter 3 presents an experiment undertaken on soft-fruit farms which had and had not used the neonicotinoid, thiacloprid, and shows that nests exposed to thia-cloprid had higher worker mortality, and lower male production than those at con-trol farms. This has implications both for pollination services now, as worker mor-tality will reduce the number of bees visiting farms, and also for the maintenance of future pollination services through decreased reproductive capacity of exposed nests. Chapter 4 uses a theoretical model to link pesticide use and habitat use to pollina-tion services, and shows that the use of commercial pollinators could mask the de-cline in wild populations, making local extinctions more likely. Chapter 5 sets out the status and extent of pollinators in the UK, along with popu-lation trends, trends in habitat and trends in pesticide use to provide an overview of how well pollination services are likely to meet the ongoing needs of crop farmers.

APA, Harvard, Vancouver, ISO, and other styles

16

Neill, Holly Ann. "The Production of Organic Nitrates in Portland Oregon and the Columbia River Gorge." PDXScholar, 2013. https://pdxscholar.library.pdx.edu/open_access_etds/681.

Full text

Abstract:

This work studied the production of aerosol-phase organic nitrates in both Portland and the Columbia River Gorge (CRG). Ozone and NOx species were investigated for correlation with organic nitrate aerosol, as they function as precursors to the production of organic nitrates. These ambient gas-phase measurements were collected in the same locations as high-volume (Hi-Vol) filters samples, in an urban and rural gorge setting to investigate correlations at the origin of the pollution plume and downwind. A novel Soxhlet extraction method for Hi-Vol filters was developed based on literature and EPA standard methods. Analysis for nitrate production was done by segregating data based on times when the wind blew out of Portland and down the CRG versus times when flow was not westerly. Filters were then compared to ambient gas-phase measurements and derived NO3 radical production rates to look for trends. Wind direction had a strong influence on the concentrations of precursor molecules in the CRG. On days with a westerly wind direction into the gorge, concentrations of the measure aerosol organic nitrates were similar at both sides. This suggests some contribution of a broader regional production of organic nitrates. There was some correlation between the production rate of NO3 radicals and the measured organic nitrate aerosol, suggesting a role for NO3 + VOC production of organic nitrates that later partition to the aerosol phase. This information will better illuminate the fate of nitrogen downwind of pollution sources. The information will also help to create a better understanding of the way topography and meteorological conditions can influence the flow of pollution. Understanding the downwind oxidative chemistry that happens in the CRG would better support both pollution prevention and mitigation efforts.

APA, Harvard, Vancouver, ISO, and other styles

17

Mazhar, Muhammad Ilyas Mechanical &amp Manufacturing Engineering Faculty of Engineering UNSW. "Lifetime monitoring of appliances for reuse." Awarded by:University of New South Wales. School of Mechanical and Manufacturing Engineering, 2006. http://handle.unsw.edu.au/1959.4/25963.

Full text

Abstract:

Environmental awareness and legislative pressures have made manufacturers responsible for the take-back and end-of-life treatment of their products. Therefore, manufacturers are struggling to find ways to recover maximum value from returned products. This goal can best be achieved by promoting multiple reuse programs as reuse is one of the most effective ways to enhance a sustainable engineering economy. Since the essential goal of the reuse strategy is to reuse parts, the reliability of used parts becomes a core issue. Research indicates that reuse is technologically feasible, associated with a significant manufacturing cost saving, and it does not compromise product quality. However, it is not easy to be applied in reality. There are several uncertainties associated with reuse, the most common is the uncertainty of the product???s quality after use. A widespread implementation of the reuse strategy could be triggered, subject to the availability of reliable methods to assess the useful remaining life of parts. The evolution of such a methodology would play a pivotal role in making decisions on the supply chain process and the recovery value of returned products. Reliability assessment by life cycle data analysis is the basis of this research. The proposed methodology addresses the problem of reliability assessment of used parts by considering two important aspects. It performs statistical as well as condition monitoring data analysis for decision-making on reuse. The analysis is carried out in two stages. Firstly, a wellknown reliability assessment procedure, the Weibull analysis, is applied to analyse time-tofailure data to assess the overall reuse potential of components. In the second stage, the used capacity (actual life) of components is determined by analysing their operating history (condition monitoring data). The linear and nonlinear regression analysis, Kriging procedures and artificial neural networks (ANN) are employed in this stage. Finally, the Weibull analysis and ANNs are integrated to estimate the remaining useful life of components/assemblies of a product at the end of its first life cycle. The model was validated by using life cycle data from consumer products.

APA, Harvard, Vancouver, ISO, and other styles

18

Smith, Kiara L. "Anaerobic Degradation of Polycyclic Aromatic Hydrocarbons at a Creosote-Contaminated Superfund Site and the Significance of Increased Methane Production in an Organophilic Clay Sediment Cap." PDXScholar, 2010. https://pdxscholar.library.pdx.edu/open_access_etds/101.

Full text

Abstract:

The overall goal of this work was to investigate microbial activity leading to the anaerobic degradation of polycyclic aromatic hydrocarbons and an organophilic clay sediment cap used at a creosote-contaminated Superfund site. To determine whether or not PAHs were being degraded under anaerobic conditions in situ, groundwater and sediment porewater samples were analyzed for metabolic biomarkers, or metabolites, formed in the anaerobic degradation of naphthalene (a low-molecular weight PAH). In addition, a groundwater push-pull method was developed to evaluate whether the transformation of deuterated naphthalene to a deuterated metabolite could be monitored in situ and if conservative rates of transformation can be defined using this method. Metabolites of anaerobic naphthalene degradation were detected in all samples that also contained significant levels of naphthalene. Anaerobic degradation of naphthalene appears to be widespread in the upland contaminated aquifer, as well as within the adjacent river sediments. A zero-order rate of transformation of naphthalene-D₈ to naphthoic acid-D₇was calculated as 31 nM·d-¹. This study is the first reported use of deuterated naphthalene to provide both conclusive evidence of the in situ production of breakdown metabolites and an in situ rate of transformation. Methane ebullition was observed in areas of the sediment cap footprint associated with organophilic clay that was used a reactive capping material to sequester mobile non-aqueous phase liquid (NAPL) at the site. Anaerobic slurry incubations were constructed using sediment core samples to quantify the contribution of the native sediment and the different layers of capping material (sand and organophilic clay) to the overall methane production. Substrate addition experiments using fresh, unused organophilic clay, as well as measured changes in total carbon in organophilic clay over time supported the hypothesis that microbes can use organophilic clay as a carbon source. Quantitative PCR (qPCR) directed at the mcrA gene enumerated methanogens in field samples and incubations of native sediment and capping materials. Denaturing gradient gel electrophoresis (DGGE) was also performed on DNA extracted from these samples to identify some of the predominant microorganisms within the sediment cap footprint. The organophilic clay incubations produced up to 1500 times more methane than the native sediment and sand cap incubations. The organophilic clay field sample contained the greatest number of methanogens and the native sediment contained the least. However, the native sediment incubations had greater numbers of methanogens compared to their respective field sample and comparable numbers to the organophilic clay incubation. An increase in methane production was observed with the addition of fresh, unused organophilic clay to the already active organophilic clay incubations indicating that organophilic clay stimulates methanogenesis. In addition, organophilic clay retrieved from the field lost about 10% of its total carbon over a 300-day incubation period suggesting that some component of organophilic clay may be converted to methane. DGGE results revealed that some of the predominant groups within the native sediment and sediment cap were Bacteriodetes, Firmicutes, Chloroflexi, and Deltaproteobacteria. An organism 98% similar to Syntrophus sp. was identified in the organophilic clay suggesting this organism may be working in concert with methanogens to convert the organic component of organophilic clay ultimately to methane. The capacity of organophilic clay to sequester organic contaminants will likely change over time as the organic component is removed from the clay. This, in turn, affects the use of this material as a long-term remedial strategy in reduced, contaminated environments.

APA, Harvard, Vancouver, ISO, and other styles

19

Larwood, Andrew John. "Cleaner production : promoting and achieving it in the South Australian foundry industry." Title page, table of contents and abstract only, 2000. http://web4.library.adelaide.edu.au/theses/09ENV/09envl336.pdf.

Full text

Abstract:

Bibliography: leaves 123-130. The literature search and the findings from the investigation have been used to provide recommendations for a sector specific cooperative approach using regulation, self-regulation, voluntary agreements, economic incentatives and educational/information strategies to promote and acheive cleaner production in the South Australian foundry industry.

APA, Harvard, Vancouver, ISO, and other styles

20

Bezy, Susana Elizabeth. "A life-cycle assessment of concrete in Hong Kong: the consumption and disposal of concrete materials andthe environmental criteria and factors regarding its production, useand disposal." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 1995. http://hub.hku.hk/bib/B31253040.

Full text

APA, Harvard, Vancouver, ISO, and other styles

21

May, John R. (John Robert) 1978. "Sustainability of electricity generation using Australian fossil fuels." Monash University, Dept. of Chemical Engineering, 2003. http://arrow.monash.edu.au/hdl/1959.1/9537.

Full text

APA, Harvard, Vancouver, ISO, and other styles

22

Cheung, Wai-hung Tony, and 張偉雄. "Harbour reclamation in Hong Kong: land production and landuse planning : the environmental perspective." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 1997. http://hub.hku.hk/bib/B31980156.

Full text

APA, Harvard, Vancouver, ISO, and other styles

23

Duncan, Scott Joseph. "A mass and energy data collection system to support environmental and economic assessment of a coating line in carpet manufacturing." Thesis, Georgia Institute of Technology, 2003. http://hdl.handle.net/1853/17330.

Full text

APA, Harvard, Vancouver, ISO, and other styles

24

Kowey, Bernadette Nola. "An example of planning for sustainable production : the dry-cell battery problem." Thesis, University of British Columbia, 1990. http://hdl.handle.net/2429/29975.

Full text

Abstract:

Growing awareness of world-wide environmental degradation has prompted the global community to explore alternatives to present human activities, and present economic development models. One concept which has emerged within this exploration is that of Sustainable Development. This thesis specifically uses the concept of Sustainable Development as Rees (1988, 1988a, 1989) and Gardner (1989) define it. Sustainable development will require substantial changes in the productive sphere. An 'energy spiral' is used to depict each stage necessary in the creation, use and disposal of a good. The social and environmental costs of each of these stages of production are explored. The positive impact of integrating re-use, recycling, recovery and replacement strategies into the consumption, production and disposal cycle for goods is described. In this thesis dry-cell batteries are used as an example of products which create problems in their disposal: heavy metals contained in these batteries exist in concentrations which require these spent batteries to be considered hazardous waste. Responses to this problem in other countries are described and critiqued. Present methods and planned strategies for hazardous waste disposal within the GVRD and the city of Vancouver are noted, and analyzed as to the sustainability of these methods and strategies. Specific plans for the disposal of dry-cell batteries are described and critiqued. Using the principles for sustainable development from Gardner (1989) and the 'energy spiral' together provides a synthesis of these two concepts. This framework provides planners and analysts a base from which strategies for sustainable production can be determined. The possibilities for use of this framework are explored, with a specific focus on dry-cell batteries. In considering the whole life-cycle of such a product, and not just focussing on the disposal stage of that cycle, responses that are more useful and pro-active can be devised. Some of the organizations and structures which presently exist and will be useful in establishing a base for the kinds of change that sustainable development will require are mentioned.
Applied Science, Faculty of
Community and Regional Planning (SCARP), School of
Graduate

APA, Harvard, Vancouver, ISO, and other styles

25

Newcomb, Patrick James. "Implications of modularity on product design for the life cycle." Thesis, Georgia Institute of Technology, 2001. http://hdl.handle.net/1853/17593.

Full text

APA, Harvard, Vancouver, ISO, and other styles

26

Beiker, Kair Alexandros, and Konstantinos Sofos. "Additive Manufacturing and Production of Metallic Parts in Automotive Industry : A Case Study on Technical, Economic and Environmental Sustainability Aspects." Thesis, KTH, Industriell produktion, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-149669.

Full text

Abstract:

Additive Manufacturing (AM) comprises a family of different technologies that build up parts by adding materials layer by layer at a time based on a digital 3D solid model. After thirty years of development, AM has become a mainstream manufacturing process with more materials and new technologies involved in this process. Undoubtedly, the most dramatic and challenging development of group of technologies has been the printing of metals. Nowadays, the use of AM for the production of parts for final products continues to grow. Organizations around the world are successfully applying the technology to the production of finished goods. AM allows design optimization and produces customized parts on-demand with almost similar material properties with the conventional manufactured parts. It does not require the use of coolants, fixtures, cutting tools and other assisting resources. The advantages of AM over conventional manufacturing can change the world of industry and lead to a new industrial revolution. In this research after reviewing mostly the different technologies and materials used in metallic AM, the application of them in a component of a passenger car engine is described. A criticality analysis is carried out in order to decide which AM development of the parts that compose the final product is more significant for the efficiency of the overall product. Based on that development a sustainability analysis is performed consisting of the analysis of the environmental impacts, the production cost analysis and the societal impact. But what has been derived from the analysis is that despite the lower environmental impact compared with the casting as a conventional method of forming of metals, AM is costly for the production of a small number of industrial products and its societal impact needs further investigation. In fact, the cost depends on the production volume, the batch size as well as the high price of the material powders and the building rates of the machines. In the future, with more advanced machines and cheaper material input the cost of metallic AM is going to drop dramatically. In spite of all the progress, the application of metallic AM is still not widespread. Since the materials as well as its technologies are still evolving, a better and more promising future is foreseen for metallic AM. Keywords: Additive Manufacturing, Direct Digital Manufacturing, Mass Production, Automotive, Internal Combustion Engine, Turbocharger, Development, Sustainability Analysis, Lifecycle Assessment
Additive Manufacturing (AM) består av en familj av olika teknologier som bygger upp komponenter genom att lägga till material lager efter lager ett lager i taget baserat på en digital 3D solid modell. Efter trettio år av utveckling, har AM blivit en mainstream tillverkningsprocess med fler material och nya teknologier involverade i denna process. Utan tvekan har den mest dramatiska och utmanande utvecklingen inom denna grupp av teknologier varit tryckningen av metaller. Nuförtiden fortsätter användningen av AM för tillverkning av delar till slutprodukter att växa. Företag runtom i världen använder tekniken framgångsrikt för produktionen av färdiga varor. AM tillåter designoptimering och tillverkar kundanpassade delar on-demand med nästan samma materialegenskaper som konventionellt tillverkade delar. Det behövs inte användning av kylmedel, fixturer, skärverktyg och andra källor. Fördelarna med AM jämfört med konventionell tillverkning kan förändra den industriella världen och leda till en ny industriell revolution. Efter att mestadels ha gått igenom de olika tekniker och material som används i metallisk AM, beskrivs i denna forskning applikationen av dem i en komponent av motorn till en personbil. En kritikalitet analys görs för att bestämma vilken AM utveckling av de delar som utgör den slutgiltiga produkten som är viktigast för effektiviteten av den totala produktionen. Baserat på denna utveckling utförs en hållbarhetsanalys som består av en analys av miljöpåverkan, produktionskostnad och de samhälleliga effekterna. Men det som har härletts från analysen är att trots den lägre miljöpåverkan i jämförelse med gjutning som en konventionell metod för formning av metaller, är AM kostsamt för produktionen av ett fåtal industriella produkter och dess samhälleliga effekter behöver studeras ytterligare. I själva verket beror kostnaden på produktionsvolymen, satsstorleken samt det höga priset på materialpulvren och byggnadstakten av maskinerna. I framtiden, med mer avancerade maskiner och billigare material kommer kostnaden för metallisk AM att sjunka dramatiskt. Trots alla utveckling, är applikationen av metallisk AM fortfarande inte utbredd. Eftersom materialen samt dess teknik fortfarande är under utveckling förutses en bättre och mer lovande framtid för metallisk AM. Nyckelord: Additive Manufacturing, Direct Digital Manufacturing, massproduktion, bilindustrin, förbränningsmotor, Turbocharger, utveckling, hållbarhetsanalys, livscykelanalys.

APA, Harvard, Vancouver, ISO, and other styles

27

Sheridan, Craig. "A critical process analysis of wine production to improve cost efficiency, wine quality and environmental performance." Thesis, Stellenbosch : Stellenbosch University, 2003. http://hdl.handle.net/10019.1/53239.

Full text

Abstract:

Thesis (MScAgric)--Stellenbosch University, 2003.
ENGLISH ABSTRACT: Wine cellars are diverse in terms of equipment types and process configurations. Whilst other food production processes have, in many cases, been properly analysed and modelled, this process diversity has resulted in an absence of process analyses in the wine industry. Each wine cellar is unique and represents a fully integrated agro-business, starting with a raw material (grapes) and extending to marketing and selling of the final product (wine). This makes the wine industry unique in this context. This study is the first attempt to analyse winemaking procedures in the form of a process audit. The study was approached in the following manner: • A questionnaire was developed to assess cellar configurations and conditions. This questionnaire was submitted to a statistically significant number of cellars, and a statistically significant number of questionnaires were returned. • The data collected from the questionnaire were statistically analysed and associations between equipment or procedures and wine faults were identified. • Three cellars were studied in depth. These three cellars had their processes audited and their effluent characterised. Additional data were obtained from current sampling projects and these data were analysed to complement the data obtained from the questionnaire • A preliminary input/output model was developed. The major results of this study are: • It was found that certain faults that appear in wine might be associated with equipment and/or process faults. These associations are statistically significant and they show that cellar hygiene is of critical importance when assessing these wine faults. The most important of these faults are VA, microbial contamination of the wine, sluggish and stuck fermentations. A risk hierarchy was derived to indicate which events are associated with others most strongly. • It was found that few wineries measure water consumption and even fewer wineries measure the quantity of effluent produced. • Correlations have been developed to predict winery parameters in terms of tons of grapes pressed per annum. These parameters include water and electricity consumed, wine produced and the quantity of effluent produced. Effluent characteristics have also been correlated to the tons of grapes pressed per annum. These characteristics include chemical oxygen demand, sodium absorption ratio and total dissolved solids in solution. Chemical oxygen demand was identified as the most important contributing factor in winery effluent. It was shown that all variables rise with an increase in cellar size, but the rise is not linear. This implies that large cellars have greater quantities of effluent of lower quality than small cellars. Most cellars have effluent concentrations that require some form of effluent treatment. The characterisation of effluent shows that the most widely used disposal practice is irrigation, and that the effluent disposed in this manner does not meet legislative requirements. • A preliminary input/output model was developed in order to enable wineries that have not measured the relevant parameters to predict the abovementioned variations. The resolution of these predictions is low but the model serves to provide an initial estimate if there are no data available. The model will give industrial averages for any given cellar size. • An economic balance was performed using this preliminary model. It was shown that if cellars were to lower the consumption of utilities and to reduce the strength of their effluent (using cleaner practices and not dilution) the reduction of operating costs could be reduced by 14% for smaller cellars to 17% for larger cellars. This study has shown that it is possible to make wine in a more environmentally friendly manner, producing better quality wines, without incurring extra costs.
AFRIKAANSE OPSOMMING: Wynkelders is diverse eenhede ten opsigte van die tipe toerusting en prosesse wat gebruik word. Terwyl ander prosesse rondom voedselproduksie in baie gevalle reeds geanaliseer en gemodelleer is, het die diversiteit in die wynindustrie gelei tot 'n afwesigheid van prosesanalises. Elke wynkelder is uniek en verteenwoordig 'n ten voile geintegreerde agro-besigheid wat begin met die rou materiaal (druiwe) en lei tot die bemarking en verkope van die finale produk (wyn), 'n eienskap wat die wynindustrie uniek maak in hierdie verband. Hierdie studie is die eerste poging om die wynmaakproses in die vorm van ‘n proses-oudit te analiseer. Die studie is soos volg aangepak: • ‘n Vraelys is ontwikkel om kelderkonfigurasies en -toestande te ondersoek. Die vraelys is aan ‘n statisties betekenisvolle aantal kelders voorgele, en ‘n statisties betekenisvolle aantal vraelyste is terugontvang. • Die data wat uit die vraelyste ontvang is, is statisties ontleed en verwantskappe tussen toerusting of prosesse en wyngebreke is geidentifiseer. • Drie kelders is in diepte bestudeer. Hierdie drie kelders se prosesse is geoudit en die afvloeiwater is gekarakteriseer. Addisionele data is verkry van huidige projekte en hierdie data is ge-analiseer om die data van die vraelys aan te vul. • ‘n Voorlopige inset / uitset model is ontwikkel. Die belangrikste resultate van hierdie studie is: • Dit is bevind dat sekere gebreke wat in wyn voorkom geassosieer kan word met tekortkominge in toerusting en/of prosesse in die kelder. Hierdie assosiasies is statisties betekenisvol en toon dat kelderhigtene van kritiese belang is wanneer gebreke in wyn ondersoek word. Die mees belangrike gebreke wat voorkom is vlugtige suur, mikrobiese kontaminasie van wyn, slepende en gestaakte fermentasie. ‘n Risikohierargie is afgelei om die gebeure te toon wat die sterktste met mekaar geassosieer word. • Dit is gevind dat min wynkelders waterverbruik meet. Selfs minder kelders meet die hoeveelheid afvloeiwater wat geproduseer word. • Korrelasies is ontwikkel om kelderparameters te voorspel in terme van ton druiwe gepars per jaar. Hierdie parameters sluit in water- en elektrisiteitsverbruik, wyn geprosuseer en hoeveelheid afvloeiwater geproduseer. Eienskappe van afvloeiwater is ook gekorreleer met die ton druiwe wat per jaar gepars word. Hierdie eienskappe sluit in chemiese suurstofbehoeftes, natrium absorpsieverhoudings en totale opgeloste soliede materiaal in oplossing. Chemiese suurstofbehoeftes is geidentifiseer as die mees belangrike bydraende faktor tot afvloeiwater in kelders. Dit is getoon dat alle veranderlikes verhoog hoe groter die kelder, maar hierdie verhoging is nie lineer nie. Dit impliseer dat groter kelder meer afvloeiwater van ‘n laer kwaliteit produseer. Die meeste kelders produseer afvloeiwater van sodanige konsentrasies dat behandeling daarvan nodig is. Die ondersoek van hierdie afvloeiwater toon dat die mees algemene wyse van wegdoening van afvloeiwater besproeiing is, en dat afvloeiwater wat op hierdie manier weggedoen word, nie voldoen aan die wetgewing se vereistes nie. • 'n Voorlopige inset/uitset model is ontwikkel om kelders wat nie die toepaslike parameters gemeet het nie in staat te stel om hierdie parameters te voorspel. Die akuraatheid van hierdie voorspellings is nie hoog nie, maar die model verskaf ‘n aanvanklike skatting waar daar geen data beskikbaar is nie. Die model verskaf industriele gemiddeldes aan kelders van enige grootte. • ‘n Ekonomiese balans is uitgevoer deur van hierdie model gebruik te maak. Dit is getoon dat indien kelders die gebruik van water en elektrisiteit verminder en die konsentrasie van afvloeiwater verlaag (deur van skoner paktyke gebruik te maak, en nie verdunning nie) die bestuurskoste met 14% vir kleiner kelders tot 17% vir groter kelders verlaag kan word. Die studie het getoon dat dit moontlik is om wyn te maak op ‘n meer omgewingsvriendelike wyse, en sodoende beter kwaliteit wyn te produseer sonder addisionele kostes.

APA, Harvard, Vancouver, ISO, and other styles

28

Jebe, Thulisa. "Potential socio-economic implications of ethanol production as a green economic initiative in Cradock, Eastern Cape." Thesis, Cape Peninsula University of Technology, 2018. http://hdl.handle.net/20.500.11838/2776.

Full text

Abstract:

Thesis (MTech (Environmental Management))--Cape Peninsula University of Technology, 2018.
South Africa is taking a continental lead towards the transition of the green economy, and the energy sector has been identified as one of the cornerstones integral in this transition. This transition pays attention to alternative energy sources to gradually replace fossil fuels. Recently, the production of ethanol is seen as an energy source that is an integral player in achieving a green economy. The ethanol production project is linked to the improvement of the economy, and social well-being concomitant with the enhancement of the environmental quality tenets embodied by the green economy. Scholars have noted that these projects tend to ignore socio-economic realities of under privileged people especially in rural areas and small towns. While the green energy is often presented by the state there is, however, no evidence of the positive as well as negative impacts of ethanol projects on improving the livelihoods of the local communities or contributing to the substance of the local economies while protecting the quality of the environment. This thesis explored the subject of ethanol projects as green economic models in the context of the ethanol project in Cradock. The thesis investigated the socio-economic implications of the ethanol project in Cradock as a green economic model. The research study argues that the inclusion of the local people in decision making for the ethanol project is crucial to securing their benefits from the project. This means that local people should be involved early in the decision making process. Failure to engage the local residents in the initial stages of decision making, may create a lack of sense of ownership resulting in a lack of socio-economic benefits for the residents. The research study adopted a qualitative research design and an inductive approach. The ethanol project in Cradock was used as a case study for the research, and two sampling techniques, purposive sampling and random sampling were used. Interviews, questionnaires and observations were used to collect data from the residents of Cradock, the business sector (hospitality, tourism and agricultural retail), the emerging farmers, the farm workers, the Agrarian Research Development Agency, and Government Departments (Local Economic Development, Department of Agriculture, Department of Rural Development and Land Reform). The findings illustrate that the ethanol project in Cradock is not consistent with the tenets of a green economic model. The results suggested that the project does not improve the livelihood of the community or contribute to the sustenance of the local economies while protecting the quality of the environment. From an environmental perspective, while the ethanol project regarding providing ethanol fuel contributes positively to the global green agenda, it deteriorates the quality of the local environment. The project pollutes the local environment which is a source of livelihood for the local people and the economy. Therefore, the adverse effect of the project on the local environment contributes to a negative effect on the local economy and livelihood of the residents. The results also revealed that the project stakeholders, particularly the residents of Cradock and the emerging farmers, were not involved in the early stages of the project where the benefits were determined. As a result, the stakeholders do not have a sense of ownership of the project, and there are uncertainties about the sustainability of their socio-economic benefits. The ethanol project introduces a shift from the traditional commercial agriculture to the production of biofuel feedstock. This causes an effect on the local economy and livelihood because traditional commercial agriculture has sustained the town for more than 200 years. The thesis raises questions about the notion that ethanol projects are green economic models.

APA, Harvard, Vancouver, ISO, and other styles

29

Mainganye, Dakalo. "Synthesis of zeolites from South African coal fly ash: investigation of scale-up conditions." Thesis, Cape Peninsula University of Technology, 2012. http://hdl.handle.net/20.500.11838/915.

Full text

Abstract:

Thesis submitted in fulfilment of requirements for the degree Magister Technologiae: Chemical Engineering In the FACULTY OF ENGINEERING At the CAPE PENINSULA UNIVERSITY OF TECHNOLOGY, 2012
The generation of electricity from coal in South Africa results in millions of tons of fly ash being produced each year. Less than 10 % of the fly ash generated is being used constructively and the remaining unused ash is currently inducing disposal and environmental problems. Intensive research on the utilisation of fly ash has been conducted either to reduce the cost of disposal or to minimise its impact on the environment. It has been shown that South African fly ash can be used as a feedstock for zeolite synthesis due to its compositional dominance of aluminosilicate and silicate phases. Most of the studies conducted on zeolite synthesis using South African fly ash are performed on small laboratory scale. Therefore, production of zeolites on an industrial/pilot plant scale would, in addition to producing a valuable product, help abate the pollution caused by the disposal of fly ash in the country. This research focuses on the investigation of the scale-up opportunity of zeolite synthesis from South African fly ashes with the view of understanding the effects of some reactor and operational parameters on the quality of the zeolite produced. Two types of zeolites (zeolite Na-P1 and zeolite A) were synthesised via two different routes in this study: (1) a two stage hydrothermal synthesis method (zeolite Na-P1) and (2) alkaline fusion prior to hydrothermal synthesis (zeolite A). The synthesis variables evaluated in this study were; the effect of impeller design and agitation rates during the aging step (zeolite Na-P1) using three different impellers (anchor, 4-flat-blade and Archimedes screw impeller) at three agitation speeds (150, 200 and 300 rpm), the effect of fly ash composition and solvents (water sources) on the phase purity of both zeolite Na-P1 and zeolite A, and the effect of the hydrothermal reaction time during the synthesis of zeolite Na-P1 using low amorphous phase fly ash i.e. aging time (12-48 hours) and hydrothermal treatment time (12-48 hours). The raw materials (fly ashes from Arnot, Hendrina, Tutuka, Lethabo and Matla power stations) and the synthesised zeolite product were characterised chemically, mineralogically and morphologically by X-ray fluorescence spectrometry, X-ray powder diffraction and scanning electron microscopy. Other characterisation techniques used in the study were 1) Fourier transform infrared spectroscopy to provide structural information and also monitor the evolution of the zeolite crystals during synthesis and 2) inductively coupled plasma atomic emission (ICP-AES) and mass spectrometry for multi-elemental analysis of the synthesis solution and the solvents used in this study. The experimental results demonstrated that the phase purity of zeolite Na-P1 was strongly affected by agitation and the type of impeller used during the aging step of the synthesis process. A high crystalline zeolite Na-P1 was obtained with a 4-flat-blade impeller at a low agitation rate of 200 rpm. Although a pure phase of zeolite Na-P1 was obtained at low agitation rates, the variation in the mineralogy of the fly ash was found to affect the quality of the zeolite produced significantly. The results suggested that each batch of fly ash would require a separate optimisation process of the synthesis conditions. Therefore, there is a need to develop a database of the synthesis conditions for zeolite Na-P1 based on the fly ash composition. As a consequence, the scale-up synthesis of zeolite Na-P1 would require step-by-step optimisation of the synthesis conditions, since this zeolite was sensitive to the SiO2/Al2O3 ratio, agitation and the mineralogy of the fly ash. On the other hand, zeolite A synthesis had several advantages over zeolite Na-P1. The results suggested that a pure phase of zeolite A can be produced at very low reaction temperature (i.e. below 100 °C, compared to 140 °C for zeolite Na-P1), shorter reaction times (i.e. less than 8 hours compared to 4 days for zeolite Na-P1), with complete dissolution of fly ash phases and more importantly less sensitive to the SiO2/Al2O3 ratio of the raw materials. The zeolite A synthesis process was found to be more robust and as a result, it would be less rigorous to scale-up despite the energy requirements for fusion. This study showed for the first time that different impeller designs and agitation during the aging step can have a profound impact on the quality of the zeolite produced. Therefore, it is not only the hydrothermal synthesis conditions and the molar regime but also the dissolution kinetics of the feedstock that influence the outcome of the zeolite synthesis process. This study has also shown for the first time that a pure phase of zeolite A can be synthesised from various sources of South African fly ash containing different mineralogical and chemical compositions via the alkali fusion method under the same synthesis conditions. Therefore, the effective zeolitisation of fly ash on a large scale would assist to mitigate the depletion of resources and environmental problems caused by the disposal of fly ash.

APA, Harvard, Vancouver, ISO, and other styles

30

Picha, Edwardsson Malin. "Towards a sustainable media system : Explorative studies of emerging media consumption trends and media processes for content production." Doctoral thesis, KTH, Medieteknik och interaktionsdesign, MID, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-164395.

Full text

Abstract:

Understanding the process of transformational change currently taking place in the media industry is an urgent challenge for people working in the industry as well as for media consumers and other stakeholders. There is a great need to deepen our general knowledge when it comes to what the future media landscape will look like. Which of the major consumption trends that exist today will continue and possibly lead to disruptive change? Which of today’s existing trends could give us a hint of tomorrow’s media landscape? Furthermore, we need to explore the environmental impact of the future media landscape. What parameters are important when it comes to environmental aspects of media consumption, as well as in the production and distribution of media content? These are examples of the questions explored in this thesis. I have used a number of methods, such as qualitative interviews, workshops, scenarios, case studies, process studies and life cycle assessment, in order to explore the research questions. The characteristics of the media consumption trends are presented in four scenarios. I have assumed that the strength of influence from the government in combination with the strength of commercial powers will strongly affect the future of media. The development of media is framed by the economy, the political system, and by culture. The future of media is closely connected with its relationship to the power structures in society. I have also defined eleven parameters, as central when discussing the environmental aspects of media consumption. These parameters are related to electronic devices, travel, transportation, energy use and waste. In the future, we may see the realisation of some of all four scenarios described in this thesis. The environmental aspects of these different future directions depend on each person’s life situation and a number of choices that each consumer makes concerning environmental issues, in combination with the overall societal structure. In relation to the global challenge of climate change/global warming, I conclude that traditional media, public service media in particular, together with social media channels play an important role in the process of increasing knowledge and awareness among consumers, politicians and other stakeholders in society. However, in current media development, media companies are rapidly becoming more commercialized and more focused on entertainment instead of on producing serious journalism concerned with social, political and cultural matters. To conclude, I believe that it is possible to create a sustainable media system, but it will require some conscious effort of people working in the media industry, of consumers, and ultimately at the level of regulatory authorities.

QC 20150416

APA, Harvard, Vancouver, ISO, and other styles

31

Bezuidenhout, Sol. "Advantages associated with the implementation and integration of environmental management systems in small manufacturing businesses." Thesis, Stellenbosch : Stellenbosch University, 2003. http://hdl.handle.net/10019.1/20902.

Full text

Abstract:

Thesis (MIng)--University of Stellenbosch, 2003.
ENGLISH ABSTRACT: TheSouthAfrican economy islargely dependant on small enterprisesas a valuable source of job creation, gross domestic product as well as product development and innovation, However, unfortunately there existsan extremeiy high failure rate among small businesswith 20%of startup businessesfailing within the firstyear of operation, and an almost 60% failure rate within the first6 years of existence, Thesestatisticshave initiated several research studies,and have been the focus of many businessbooks, in itseif, creating a vast industry of small businesssuccesstools and quick fix solutions, When considering the high failure rates of small businesses,the concepts surrounding sustainable development come into question by pure method of association, Sustainable development issueshave become a top priority globally and have moved up the corporate agenda in recent years. When trying to "marry" these two concepts, questions arise regarding the effect of integrating sustainability principles and management systems,with contemporary small businessstrategy. Theaim of thisstudy isto investigate existingcritical successmodels and to integrate some simple initial stages of sustainable development business strategy within these models. Expectantly, some of the principles contained in the formalisation of management systems that address sustainability issues,could be incorporated in traditional management models in an attempt to identify possible interventions and tools that might positivelyimpact on the successrate of small businessenterprises. These concepts would be tested by means of implementing a formal environmental management system (based on the ISO 14001standard) as an initial approach to addressingsustainabilitygoals, as a case study, The successful implementation of an ISO 14001 environmental management system at this small businessenterprise, realised several advantages for the company, and have been used to adapt traditional management models to include for some of the simple concepts of sustainable development.
AFRIKAANSE OPSOMMING: Die Suid Afrikaanse ekonomie is in 'n groot mate afhanklik van klein besighede as 'n waardevolle bron van werkskepping, bruto binnelandse produk, asook van produk ontwikkeling en innovasie, Des nieteenstaande, bestaan daar ongelukkig 'n baie hoe faling syfer onder klein besighede, met 20%van aanvangsbesighede wat mislukbinne die eerste jaar van bedryf en ongeveer 60%van besighede wat mislukbinne die eerste 6jaar van bestaan. Hierdie statistieke het reeds verskeie navorsingstudiesgeinisieer en was reeds die tema van verskeie boeke, wat opsig self 'n reuse industrie genereer van sake sukseshandleidings en kits oplossings vir verskeie probleme, Wanneer hierdie hoe falings statistieke onder klein sake ondernemings oorweeg word, bevraagteken mens die konsepte rakende volhoubare ontwikkeiing, bloot as gevolg van assosiasie,Volhoubare ontwikkeling het in die laaste paar jaar baie aandag geniet op die prioriteitsagendas internationaal, asook van verskeie korporatiewe agendas. As gepoog word om hierdie twee konsepte met mekaar te vereenselwig, ontwikkel daar verskeievrae rakende die effek van die integrering van volhoubare ontwikkelingsbeginselsen verwante bestuurstelsels,met bestaande kiein sake onderneming strategie, Die doel van hierdie studie isom bestaande suksesmodelIe vir klein sake ondernemings te ondersoek, en om sommige van die begin fase beginselsvan volhoubare besigheids strategie, met mekaar te integreer. Daar sou verwag kon word dot sommige van .die konsepte bevat in die formaiisering van bestuurstelselsrakende volhoubare ontwikkeling, ook geinkorporeer kan word binne bestaande traditionele bestuursmodelle, in 'n poging om moontlike ingrypings en gereedskap te identifiseer wat 'n positiewe impak kan he op die suksessyfersvan kleinsake ondernemings. Hierdie konsepte is getoets aan die hand van 'n implimentering van 'n formele omgewingsbestuurstelsel(gebasseer op die ISO14001standaard) as 'ngevalle studie, wat die begin benadering vorm om die doelwitte van volhoubaarheid aan te spreek. Die suksesvolleimplimentering van 'n ISO 14001omgewingsbestuurselsel by 'n klein sake onderneming het verskeie voordele vir hierdie maatskappy tot gevolg gehad. en is gebruik om tradisionele suksesmodelleaan te pas, om voorsiening te maak vir sommige van die konsepte rakende volhoubare ontwikkeling.

APA, Harvard, Vancouver, ISO, and other styles

32

Retamales, Roberto. "A study of semi-intensive shrimp culture in Ecuador in relation to physical, chemical and biological conditions in the production ponds during El Nino and La Nina events (1996 to 1999)." Thesis, University of Stirling, 2002. http://hdl.handle.net/1893/3286.

Full text

Abstract:

Once every three, four or even seven years, the Southeast trade winds which blow west-ward across the tropical zone of the Pacific Ocean, from the shores of South America towards the Asian land mass, weaken and sometimes even reverse their direction. This phenomenon is known as El Nino. Conversely, the climatic condition known as La Nina is characterised by unusually cold ocean temperatures in the equatorial Pacific, as compared to El Nino. Global climate anomalies associated with La Nina tend to be opposite to those of El Nino. A study of shrimp culture in Ecuador was carried out to analyse the temporal changes in pond water quality, phytoplankton composition and diversity, and bacterial composition and diversity in the intestines of cultured Litopenaeus vannamei in Ecuador. These parameters were studied in relation to their impact on the growth, survival and production in a semi-intensive shrimp culture farm situated in the Chone River Estuary, Ecuador. Five culture periods were studied during the climatic events of El Nino, La Nina and transition periods (1996 to 1999 ). Shrimp were stocked in ponds at 10 PL/m2. Pond management included pond drying, inorganic fertilisation, and feeding with a commercial pellet twice a day. The physicochemical characteristics of the pond water and the phytoplankton and bacterial counts were estimated at intervals of 7-15 days of culture during each period of study. The concentrations of nitrite, nitrate, sulphide, ammonia, pH and suspended solids in the pond water in all ponds during the five culture periods fluctuated within ranges considered compatible with shrimp farming. Phosphorus, silica, temperature and salinity, however, showed significant differences during the five periods of shrimp culture, reaching sub-optimal levels during some culture periods. The species composition and diversity of phytoplankton was different during El Nino, La Nina events and transition periods, with a decrease in the diatom community and an increase in the cyanophytes algae community associated with changes in nutrients and nutrient ratios, and temperature, salinity is discussed. A low diversity of bacterial genera with a predominance of Vibrio spp., particularly V. harveyi and V. parahaemolyticus, was observed in shrimp intestines during disease outbreaks in the transition and La Nina periods associated with significant environmental changes in temperature and salinity. Shrimp performance was significantly different between El Nino, La Nina and transition climatic periods. Survival, feed conversion ratio and yield were better during El Nino periods because of the positive effects of higher pond water temperature and salinity (29°C and 28 psu) on the shrimp stocks.

APA, Harvard, Vancouver, ISO, and other styles

33

Copertino, Margareth. "Production ecology and ecophysiology of turf algal communities on a temperate reef (West Island, South Australia)." Title page, contents and abstract only, 2002. http://web4.library.adelaide.edu.au/theses/09PH/09phc782.pdf.

Full text

Abstract:

Includes bibliographical references (leaves 235-258). Estimates the primary production and investigates the photosynthetic performance of temperate turfs at West Island, off the coast of South Australia. These communities play a fundamental role in reef ecology, being the main source of food for grazers, both fishes and invertebrates. Turfs also have an important function in benthic algal community dynamics, being the first colonizers on disturbed and bare substratum.

APA, Harvard, Vancouver, ISO, and other styles

34

Dohde, Farhan A. "Estimation of Air Emissions During Production Phase from Active Oil and Gas Wells in the Barnett Shale Basin: 2010-2013." Thesis, University of North Texas, 2015. https://digital.library.unt.edu/ark:/67531/metadc799523/.

Full text

Abstract:

The Barnett shale basin, the largest onshore gas field in the state of Texas, mainly produces natural gas. The basin’s oil and gas productions have dramatically increased over the past two decades with the enhancement via shale fracturing (fracking) technology. However, recent studies suggest that air emissions from shale fracking have significantly contributed to the growing air pollution problem in North Texas. In this study, air emissions from the Barnett shale basin during the production phase of the oil and gas activities (once the product is collected from the wells) are quantified. Oil and gas production data were acquired from the Texas Railroad Commission for the baseline years of 2010 through 2013. Methodology from prior studies on shale basins approved by the Texas Commission on Environmental Quality was employed in this study and the emission inventories from the production phase sources were quantified. Accordingly, the counties with the most gas operations in the basin, Tarrant, Johnson, Denton and Wise, were found to be the highest emitters of air pollutants. Tarrant County was responsible for the highest emitted NOx (42,566 tons) and CO (17,698 tons) in the basin, while Montague County released the maximum VOC emissions (87,601 tons) during the study period. Amongst the concerned emitted pollutants, VOC was the largest emitted pollutant during the study period (417,804 tons), followed by NOx (126,691 tons) and CO (47,884 tons). Significant Sources of air emissions include: storage tanks, wellhead compressor engines, and pneumatic devices. Storage tanks and pneumatic devices contributed to about 62% and 28% of the total VOC emissions, respectively. Whereas, wellhead compressor engines are primarily responsible for about 97% of the total NOx emissions. Finally, in Tarrant, Wise and Denton counties, the emissions increased during the study period due to increase in the oil and gas production, while Johnson County’s emission contribution declined throughout the study period.

APA, Harvard, Vancouver, ISO, and other styles

35

Blanchard, Ryan. "An assessment of the potential biodiversity impacts from biofuel production in South Africa." Thesis, Stellenbosch : Stellenbosch University, 2014. http://hdl.handle.net/10019.1/95933.

Full text

Abstract:

Thesis (PhD)--Stellenbosch University, 2014.
ENGLISH ABSTRACT: Biofuels are being promoted as a global necessity to meet climate change targets through the replacement of fossil fuels. Many countries have identified biofuels as a potential mechanism to meet these challenges, with policy directives driving biofuel production. The South African government has proposed that biofuels form part of the country’s future renewable energy and has proposed a draft biofuel strategy. This study aims to investigate appropriate approaches to determine potential biodiversity impacts from biofuel production. Since biofuels are not currently grown to any large extent in South Africa, impact was modelled using future scenarios of converting available land within the Eastern Cape Province of South Africa. Suitable species were identified using the species distribution modelling programme MaxEnt. Some of the proposed biofuel crops were considered as invasive (i.e. they spread from sites where they are cultivated) or are very likely to be invasive in South Africa. This study also highlighted the considerable overlap between suitable growing areas and areas considered important for future biodiversity conservation. The biodiversity intactness index (BII), a broad based biodiversity indicator, was used to assess the biodiversity implications of transforming available land to biofuels. The BII indicates losses of biodiversity between 17.6% and 42.1% for the land use scenarios identified. An important finding was that excluding important biodiversity areas that occur outside of protected areas can reduce biodiversity losses by as much as 13% and maintain an overall intactness of ~70%. Currently the BII does not account for fragmentation or landscape configuration. This was addressed by developing a revised biodiversity intactness index (R-BII) which included the effect of patch-size and habitat fragmentation on biodiversity intactness. This study found that although the original BII reported on the biodiversity trends of large-scale shifts in land-use across multiple scales it could not detect changes in landscape configuration which was reflected by the R-BII. Land-use change can impact on ecosystem processes that underpin the provisioning of ecosystem services by changing the combinations of species and the plant functional traits within communities. The impacts of cultivating potential biofuel species (Acacia mearnsii, Sorghum halepense and Eucalyptus species) were investigated using a plant functional traits approach. These species were shown to affect the leaf nitrogen content, leaf phosphorous content and leaf dry matter content associated with important ecosystem functions within an ecosystem service hotspot in the Eastern Cape. A decline in functional diversity was reported for all transformed land-uses by as much as ~40%. These shifts may be used to identify potential changes to ecosystem services associated with natural vegetation. The methods used in this thesis highlight the overall relevance of this work and its importance to minimising biodiversity resulting from biofuel production. Some of the key findings address resolving spatial conflict, using biodiversity indicators, assessing impacts of potential invasive species and planning for ecosystem services. New drivers of change to land-use, such as biofuel production, are a major challenge to conservation biologists and planners and the insights derived in from this study can be successfully applied to guide biofuel production.
AFRIKAANSE OPSOMMING: Biobrandstof word internasionaal beskou as 'n noodsaaklike komponent in die bereiking van klimaatsverandering doelwitte deur fossielbrandstowwe daarmee te vervang. Daarom word biobrandstof deur verskeie lande geïmplementeer as 'n potensiële meganisme om aan hierdie uitdaging te voldoen. Die Suid-Afrikaanse regering het voorgestel dat biobrandstof deel vorm van die land se hernubare energie toekoms en het daarom 'n konsep biobrandstofstrategie voorgestel. Die aanvaarding van so 'n strategie sal waarskynlik ‘n aantal verreikende gevolge inhou. Hierdie studie gebruik verskeie benaderings ten einde die impak van biobrandstof produksie op biodiversiteit te bepaal. Aangesien biobrandstof nie tans ‘n beduidende bydra maak tot tradisionele brandstofproduksie in Suid-Afrika nie, word die impak daarvan geskoei op die omskakeling van beskikbare grond. Die Oos-Kaap provinsie van Suid-Afrika speel a sleutelrol in hierdie opsig en vorm daarom die fokus van hierdie analise. Geskikte spesies is geïdentifiseer deur die sagtewareprogram, MaxEnt, waardeur spesiesverspreiding gemodelleer word. Hierdie studie beklemtoon die aansienlike oorvleueling wat daar bestaan tussen geskikte aanplantingsgebiede en belangrike biodiversiteitsareas wat nie tans formeel bewaar word nie. Sommige van die voorgestelde biobrandstofgewasse is tans indringers, of het die potensiaal om indringerplante te word en daarom is daar toenemende kommer oor die kweek van biobrandstof gewasse in Suid-Afrika. Die “Biodiversity Intactness Index” (BII), 'n algemene biodiversiteitsaanwyser, is gebruik om die implikasies van grondomskakeling na biobrandstof op biodiversiteit te evalueer. Die BII dui op verliese van tussen 17,6% en 42,1% vir die grondgebruikscenario's wat geïdentifiseer is. 'n Belangrike bevinding was dat die uitsluiting van belangrike biodiversiteitsareas buite beskermde gebiede die verlies van biodiversiteit met soveel as 13% kan verminder en biodiversiteit eenheid van ~ 70% kan behou. Die BII maak egter nie tans voorsiening vir landskap fragmentasie nie. ‘n “Revised-Biodiversity Intactness Index” (R-BII) is ontwikkel wat die effek van kol-grootte en habitat op biodiversiteit eenheid insluit. Hierdie studie het bevind dat alhoewel die oorspronklike BII grootskaalse verandering in die grondgebruik op verskeie skale aandui, dit egter nie verandering in landskapsamestelling kon opspoor soos die R-BII nie. Ten slotte, die impak van die aanplanting van potensiële biobrandstofspesies (Acacia mearnsii, Sorghum halepense en Eucalyptus spesies) op biodiversiteit is ondersoek deur ‘n plant funksionele eienskappe benadering te gebruik. Daar is bevind dat hierdie spesies die stikstof, fosfor en droë materiaal inhoud van blare verander wat geassosieer word met belangrike ekosisteem funksies binne 'n biodiversiteit brandpunt in die Oos- Kaap. ‘n Vermindering van funksionele diversiteit van soveel as ~ 40% is binne alle omgeskakelde grondgebruike gevind. Hierdie skuiwe kan gebruik word om potensiële veranderinge van ekosisteemdienste te identifiseer en benadruk ook die potensiële impak van uitheemse spesies. Die metodes wat gebruik word in hierdie studie beklemtoon die relevansie van die werk asook die belangrikheid daarvan om die nadelige uitwerking van biobrandstofproduksie op biodiversiteit te minimaliseer. Verskeie benaderings tot die oplossing van ruimtelike konflik, die gebruik van biodiversiteitaanwysers, die beoordeling van die impak van die potensiële indringerspesies en die beplanning vir ekosisteemdienste. Nuwe dryfvere van grondgebruikverandering soos biobrandstof is 'n groot uitdaging en die insigte wat uit hierdie studie verkry is dra by tot die vermindering van die potensiële impak van biobrandstofproduksie op biodiversiteit.

APA, Harvard, Vancouver, ISO, and other styles

36

Tsang, Heung-chun, and 曾向俊. "The impact of the global-warming-led climate change on agricultural production of major grain producing regions in China." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2011. http://hub.hku.hk/bib/B46733048.

Full text

APA, Harvard, Vancouver, ISO, and other styles

37

Foran, Tira. "Rivers of contention : Pak Mun Dam, electricity planning, and state-society relations in Thailand, 1932-2004." Connect to full text, 2006. http://hdl.handle.net/2123/1984.

Full text

Abstract:

PhD
This study investigates how actions – especially narratives and claims – of civil society advocates influenced electricity generation planning and hydropower project implementation, in the context of a democratising authoritarian state. To pursue this research agenda, I use a critical realist philosophy of science to ground a conceptual framework whose fundamental components consist of institutions, interests, and discourses. The research presents three case studies from Thailand, a nation-state with distinct authoritarian legacies, as well as significant economic and political dynamism in the late 20th century. The cases step from macro to micro levels of analysis: (1) Electricity generation planning: an overview and critique of the social construction of peak power demand and supply options in Thailand, 1960s–2004. I focus on the rise of energy conservation advocacy in the early 1990s, and the rise of more confrontational energy activism in the late 1990s; (2) Pak Mun Dam: contention between EGAT, anti-dam villagers, and other state and civil society actors, 1989–2003; (3) Pak Mun Dam: analysis of how knowledge discourses shaped debates over fisheries and local livelihoods in the lower Mun river basin, 1999–2004. I pursue these cases in the larger context of Thai state–society relations, 1932–early 2000s: from the Khana Ratsadorn (People’s Party) and its founders’ increasingly authoritarian struggles to shape the state; through to the rise of civil society in the Indochina-war era; through the emergence of parliamentary politics and NGO evolution in the 1980s and early 1990s; to the Thai Rak Thai “money politics” party that emerged in 1998. Specific research questions focus on patterns and outcomes of state–society interaction, the role of lay and expert knowledge discourses in structuring conflict, and plausible causal connections between outcomes and concepts used in the conceptual framework. The study is based on fieldwork conducted between 2001 and 2005, with 18 months of intensive work concentrated in 2002 and 2004. Recurrent procedures consisted of collecting policy narratives and arguments and re-constructing actors’ interests (including those of leaders in organizations) via participant observation, interviews, and textual analysis. The thesis argues that anti-dam advocates influenced project implementation practices at Pak Mun Dam by forming social change networks, gaining contingent recognition as new political actors. Through innovative and disruptive action, through claims for transparency and justice, through mass performances of worthiness, unity, and commitment, and through the production of local knowledge, they helped set agendas. They triggered elite intervention, as well as reactive counter-mobilization and occasional violence. The escalation of uncertainty from unintended outcomes challenged elites – aided by deliberative exchanges – to reconsider unfavourable decisions, to reconsider their preferences, and to make concessions. At the same time, a number of events made the Assembly of the Poor, the main anti-dam movement organization, vulnerable to destabilizing action at the local and national levels. These include: the formation of competitive organizations in the lower Mun basin; complex and intractable issues (such as multiple rounds of compensation); and inability to take credit for championing the interests of vulnerable small farmers. Destabilizing interactions occurred particularly in the restricted media space of the post-financial and economic crisis years. Populist platforms put forward by Thai Rak Thai and Prime Minister Thaksin Shinawatra pre-empted the AOP’s influence. Sustainable energy advocates influenced practices of power system planning by teaching new techniques of energy conservation, and diffusing new norms. In the recent period, however, as some of them engaged in more contentious interaction, such as intervening in conflicts over new coal and hydroelectric power plants (in southern Thailand and Laos respectively) they disrupted dominant rationalities, and found themselves confronting some of the same core practices of a power-wielding bureaucracy and an authoritarian state, namely rhetorical strategies that police the boundaries of policy-relevant knowledge. The thesis, intended to contribute to social science methodology and theory, concludes with a critical appraisal of the conceptual framework. I suggest new research agendas for analysts interested in mechanisms of civil society advocacy in the context of democratising states.

APA, Harvard, Vancouver, ISO, and other styles

38

Gottfried, Gerald J. "Effects of patch clearcutting on water yield improvement and on timber production in an Arizona mixed conifer watershed." Diss., The University of Arizona, 1989. http://ezproxy.library.arizona.edu/login?url=.

Full text

APA, Harvard, Vancouver, ISO, and other styles

39

Nolte, Mirco. "Commercial biodiesel production in South Africa : a preliminary economic feasibility study." Thesis, Link to the online version, 2007. http://hdl.handle.net/10019/369.

Full text

APA, Harvard, Vancouver, ISO, and other styles

40

周厚華 and Donna Chaw. "Biochemical changes in the fermentation bedding of the "pig-on-litter"method of pig farming: with special emphasison biodegradation of nitrogen compounds and odour production." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 1996. http://hub.hku.hk/bib/B43893740.

Full text

APA, Harvard, Vancouver, ISO, and other styles

41

Riul, Marília. "Diagnóstico e diretrizes para a gestão de aspectos sociais e ambientais no APL de móveis de João Pessoa-PB." Universidade Federal da Paraíba, 2010. http://tede.biblioteca.ufpb.br:8080/handle/tede/4579.

Full text

Abstract:

Made available in DSpace on 2015-05-07T14:49:36Z (GMT). No. of bitstreams: 1 arquivototal.pdf: 1938958 bytes, checksum: e6c108fffa46ce6b74f69528b19f726f (MD5) Previous issue date: 2010-03-08
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - CAPES
Productive and management strategies that emphasize social and environmental aspects are crucial in the context of social and environmental crisis. The furniture industry is an activity that needs attention, in face of the various environmental aspects and impacts involved in its activity, like the exaggerated volume of waste of production, the overexploitation and waste of wood and the use of toxic substances. Furthermore, the furniture production is predominantly performed by micro and small enterprises (MSEs), what results in incipient strategies of environmental management. This research intended to present a diagnostic of the behavior of the furniture enterprises that participates of the local production system (LPS) of the furniture sector in João Pessoa, Paraíba, in relation to social and environmental aspects. The chosen methods for the data collection were interviews to the businesses owners and direct observations in the enterprises. The results diagnosed that the studied enterprises still do not behave proactively in relation to various social and environmental aspects of the activity, and sometimes disclaim any responsibility on the grounds that the MSEs did not exert negative pressure on the environment and society. We highlight the problem of inadequate waste management, which triggers series of social and environmental risks such as pollution and damage to workers' health. From the diagnosis, it was possible to systematize recommendations for improving the environmental performance of companies in the LPS, based on the principles of unity and cooperation among enterprises.
A aplicação de práticas produtivas e de gestão com ênfase no respeito a aspectos sociais e ambientais é indispensável no contexto da crise socioambiental. A indústria moveleira é uma atividade que merece ser investigada, já que sua atuação envolve aspectos e impactos ambientais variados, a exemplo do grande volume de resíduos gerados, da exploração irracional e desperdício de madeira e do uso de substâncias tóxicas. Além disso, o setor moveleiro é composto predominantemente por micro e pequenas empresas, fato que implica em práticas incipientes de gestão com caráter ambiental, com prejuízos também para a sua economia. Nesse sentido, esta pesquisa pretendeu realizar um diagnóstico do comportamento atual das empresas de móveis que formam o arranjo produtivo local (APL) de Móveis de João Pessoa, Paraíba com relação a aspectos sociais e ambientais. A metodologia aplicada foi a pesquisa de campo, com coleta de dados através de um questionário direcionado aos empresários e um formulário para observação direta. Os resultados diagnosticaram que as empresas ainda não se comportam proativamente em relação a vários aspectos socioambientais da atividade, e por vezes se isentam de qualquer responsabilidade sob a justificativa de que as MPEs não exercem pressão negativa sobre o meio ambiente e social. Destaca-se o problema dos resíduos, cuja gestão ainda é inadequada, o que desencadeia série de riscos sociais e ambientais, como poluição e danos à saúde do trabalhador. A partir do diagnóstico, foi possível sistematizar recomendações para a melhoria do desempenho ambiental das empresas do APL, baseadas nos princípios de união e cooperação entre as empresas.

APA, Harvard, Vancouver, ISO, and other styles

42

OLOFSSON, ELIN, ALEXANDER BRINK, and LINDA JOHANSSON. "En kartläggning av svensk ull och dess framtida användning." Thesis, Högskolan i Borås, Institutionen Textilhögskolan, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:hb:diva-20174.

Full text

Abstract:

SammanfattningUppsatsen är utformad efter ett förslag från Anders Ryberg vid Länsstyrelsen i Västra Götalands län. Förslaget var att lokalisera användningsområden för den ull som i dagsläget kasseras i Sverige. I början beskriver vi grundläggande fakta om ullfibern för att ge dig som läsare ett bättre begrepp om ullfiberns användningsområden som senare tas upp i arbetet. Detta följs av en beskrivning av de miljöaspekter som ullanvändningen medför, vilket dessutom är viktigt ur en marknadsföringssynpunkt. De ullkvalitéer vi har i Sverige beskrivs därefter kortfattat, följt av en presentation av svenska företag och projekt som arbetar med svensk ull. Därefter beskrivs Australiens, Storbritanniens och Norges ullindustrier. Deras marknadsfringsstrategier och infrastrukturer för ullhantering är viktiga att ta del av om den svenska ullindustrin ska kunna konkurrera i framtiden. Vi har även funnit många intressanta användningsområden för den svenska ullen. Däribland finner vi geotextil, isolering och ull i avfallshantering enklast att producera utifrån de förutsättningar vi har i Sverige. Våra slutsatser är att det krävs en hel del initiativ, framförallt från fårägarna i Sverige, för att skapa en större efterfrågan på svensk ull. Tillvägagångssättet är att skapa infrastruktur för uppsamling och sortering av ullen runtom i landet, sedan marknadsföra ullen med hjälp av information om dess unika egenskaper och positiva miljöaspekter.

AbstractThe thesis is developed from a proposition by Anders Ryberg at the county administration board of Västra Götaland. The proposition was to evaluate new fields of utility for the Swedish wool which today is disregarded. First off we give a basic description of the facts concerning the wool fiber in order for you as a reader to better comprehend how the wool fiber applies in different fields of utility, which is brought up later in the thesis. This is followed by a description of the environmental aspects which comes with the usage of wool, which also is important from a marketing point of view. The different types of wool we have in Sweden are then briefly described, followed by a presentation of Swedish companies and projects who are working with Swedish wool. Thereafter we describe the wool industries of Australia, Great Britain and Norway. Their marketing strategies and infrastructures for wool handling are important to acknowledge if the Swedish wool industry are to be able to compete in the future. We have also found many interesting fields of utility for the Swedish wool. Among many we have found geotextile, isolation and wool in waste management the easiest ones to produce looking at the prerequisites we have in Sweden. Our conclusions are that a lot of initiative will be needed, especially from the Swedish sheep owners, to be able to create a larger demand for Swedish wool. The way to go about it is by creating an infrastructure for collecting and sorting of the wool around the country, then implicate marketing with information about the unique abilities of wool and its positive environmental aspects.

Program: Textil produktutveckling med entreprenörs- och affärsinriktning

APA, Harvard, Vancouver, ISO, and other styles

43

Ötsch, Rainald. "Stromerzeugung in Deutschland unter den Rahmenbedingungen von Klimapolitik und liberalisiertem Strommarkt : Bewertung von Kraftwerksinvestitionen mit Bayes’schen Einflussdiagrammen." Phd thesis, Universität Potsdam, 2012. http://opus.kobv.de/ubp/volltexte/2014/6905/.

Full text

Abstract:

Mit der Liberalisierung des Strommarkts, den unsicheren Aussichten in der Klimapolitik und stark schwankenden Preisen bei Brennstoffen, Emissionsrechten und Kraftwerkskomponenten hat bei Kraftwerksinvestitionen das Risikomanagement an Bedeutung gewonnen. Dies äußert sich im vermehrten Einsatz probabilistischer Verfahren. Insbesondere bei regulativen Risiken liefert der klassische, häufigkeitsbasierte Wahrscheinlichkeitsbegriff aber keine Handhabe zur Risikoquantifizierung. In dieser Arbeit werden Kraftwerksinvestitionen und -portfolien in Deutschland mit Methoden des Bayes'schen Risikomanagements bewertet. Die Bayes'sche Denkschule begreift Wahrscheinlichkeit als persönliches Maß für Unsicherheit. Wahrscheinlichkeiten können auch ohne statistische Datenanalyse allein mit Expertenbefragungen gewonnen werden. Das Zusammenwirken unsicherer Werttreiber wurde mit einem probabilistischen DCF-Modell (Discounted Cash Flow-Modell) spezifiziert und in ein Einflussdiagramm mit etwa 1200 Objekten umgesetzt. Da der Überwälzungsgrad von Brennstoff- und CO2-Kosten und damit die Höhe der von den Kraftwerken erwirtschafteten Deckungsbeiträge im Wettbewerb bestimmt werden, reicht eine einzelwirtschaftliche Betrachtung der Kraftwerke nicht aus. Strompreise und Auslastungen werden mit Heuristiken anhand der individuellen Position der Kraftwerke in der Merit Order bestimmt, d.h. anhand der nach kurzfristigen Grenzkosten gestaffelten Einsatzreihenfolge. Dazu wurden 113 thermische Großkraftwerke aus Deutschland in einer Merit Order vereinigt. Das Modell liefert Wahrscheinlichkeitsverteilungen für zentrale Größen wie Kapitalwerte von Bestandsportfolien sowie Stromgestehungskosten und Kapitalwerte von Einzelinvestitionen (Steinkohle- und Braunkohlekraftwerke mit und ohne CO2-Abscheidung sowie GuD-Kraftwerke). Der Wert der Bestandsportfolien von RWE, E.ON, EnBW und Vattenfall wird primär durch die Beiträge der Braunkohle- und Atomkraftwerke bestimmt. Erstaunlicherweise schlägt sich der Emissionshandel nicht in Verlusten nieder. Dies liegt einerseits an den Zusatzgewinnen der Atomkraftwerke, andererseits an den bis 2012 gratis zugeteilten Emissionsrechten, welche hohe Windfall-Profite generieren. Dadurch erweist sich der Emissionshandel in seiner konkreten Ausgestaltung insgesamt als gewinnbringendes Geschäft. Über die Restlaufzeit der Bestandskraftwerke resultiert ab 2008 aus der Einführung des Emissionshandels ein Barwertvorteil von insgesamt 8,6 Mrd. €. In ähnlicher Dimension liegen die Barwertvorteile aus der 2009 von der Bundesregierung in Aussicht gestellten Laufzeitverlängerung für Atomkraftwerke. Bei einer achtjährigen Laufzeitverlängerung ergäben sich je nach CO2-Preisniveau Barwertvorteile von 8 bis 15 Mrd. €. Mit höheren CO2-Preisen und Laufzeitverlängerungen von bis zu 28 Jahren würden 25 Mrd. € oder mehr zusätzlich anfallen. Langfristig erscheint fraglich, ob unter dem gegenwärtigen Marktdesign noch Anreize für Investitionen in fossile Kraftwerke gegeben sind. Zu Beginn der NAP 2-Periode noch rentable Investitionen in Braunkohle- und GuD-Kraftwerke werden mit der auslaufenden Gratiszuteilung von Emissionsrechten zunehmend unrentabler. Die Rentabilität wird durch Strommarkteffekte der erneuerbaren Energien und ausscheidender alter Gas- und Ölkraftwerke stetig weiter untergraben. Steinkohlekraftwerke erweisen sich selbst mit anfänglicher Gratiszuteilung als riskante Investition. Die festgestellten Anreizprobleme für Neuinvestitionen sollten jedoch nicht dem Emissionshandel zugeschrieben werden, sondern resultieren aus den an Grenzkosten orientierten Strompreisen. Das Anreizproblem ist allerdings bei moderaten CO2-Preisen am größten. Es gilt auch für Kraftwerke mit CO2-Abscheidung: Obwohl die erwarteten Vermeidungskosten für CCS-Kraftwerke gegenüber konventionellen Kohlekraftwerken im Jahr 2025 auf 25 €/t CO2 (Braunkohle) bzw. 38,5 €/t CO2 (Steinkohle) geschätzt werden, wird ihr Bau erst ab CO2-Preisen von 50 bzw. 77 €/t CO2 rentabel. Ob und welche Kraftwerksinvestitionen sich langfristig rechnen, wird letztlich aber politisch entschieden und ist selbst unter stark idealisierten Bedingungen kaum vorhersagbar.
Power plant investors face large uncertainties due to ongoing liberalization, climate policy, and long investment horizons. This study provides a probabilistic appraisal of power plant investments within the framework of Bayesian decision theory. A Bayesian influence diagram is used for setting up a discounted cash flow model and analysing the profitability of power plants. As the study explicitly models merit order pricing, the pass-through of random fuel and carbon costs may be analysed. The study derives probabilistic statements about net present values of single investments and company portfolios and explores the sensitivity of profits to variations of select input variables. In the majority of cases, an increase in the price of emission allowances also increases the net present value of existing power plant portfolios. A substantially increased carbon prices also is the prerequisite to diversify power plant portfolios by gas and CCS plants. For the currently prevailing German electricity market, we argue that investors may lack incentives for new investments in fossil generation, a finding that holds true also with implementation of CCS. Our estimates are conservative, as profitability will further deteriorate with the build-up of renewables.

APA, Harvard, Vancouver, ISO, and other styles

44

Graham, Garrett. ""Don't Frack with Denton"." Thesis, University of North Texas, 2017. https://digital.library.unt.edu/ark:/67531/metadc984171/.

Full text

Abstract:

Don't Frack With Denton chronicles the ground-breaking movement to ban hydraulic fracturing in the city of Denton, Texas by combining observational location shooting with extensive sit-down interviews and carefully negotiated subject-filmmaker relationships to create a safe and comfortable space for thoughtful reflection and criticism of a complex social movement who's activities span several years and many individuals. The result is a long-form documentary that is unapologetically in solidarity with this movement's goals while simultaneously maintaining enough editorial independence and critical distance to allow the activists themselves to honestly evaluate their decision-making, tactics and interpersonal relationships in ways that will provide insight and instruction to similar movements around the country and the world.

APA, Harvard, Vancouver, ISO, and other styles

45

Munro, Samantha Alanna. "A water footprint assessment of primary citrus production in the Lower Sundays River Valley Citrus Farms, Eastern Cape, South Africa." Thesis, Rhodes University, 2015. http://hdl.handle.net/10962/d1017558.

Full text

Abstract:

With the current implementation of the South African National Water Act (NWA) underway, comprehensive tools to assist in the efficient, fair and sustainable management of water resources are needed. Water footprints (WFs) are increasingly being recognised as a meaningful way to represent human appropriation of water resources and provide a framework for assessing the sustainability of water use. The study calculated blue, green and grey WFs for the lower Sundays River Valley (LSRV) citrus sector across dry, humid and long-term average climates for a number of cultivars. The sustainability of both the LSRV and the production process of citrus were examined through the adoption of a number of environmental, social and economic indicators. The study revealed that there was no water scarcity in the area because of an inter-basin transfer and that water pollution levels attributed to citrus production required a more comprehensive indicator than the grey WF. Results showed that navels, despite being the dominant cultivar, had the highest WF and the lowest water productivity and technical efficiency. It also provided lower benefits of income and employment in terms of water use in comparison to other cultivars. Conversely, cultivars such as lemons, which required a greater amount of water and fertiliser, were the most productive cultivar with the lowest blue, green and grey WF. The study demonstrated the complexity of decisions regarding water management and the need to assess accurately the environmental, social and economic implications of strategies to increase efficiency of water. The importance of incorporating local data and verifying WFs was also illustrated. The analysis highlighted that WF assessments could be useful for the South African government and agricultural sectors to assist in future water management decisions and promote increased collaboration between stakeholders. The study found that the adoption of local benchmarks could be useful in aiding the promotion of more efficient water use and could factor in sensitive economic and social attributes. WFs in conjunction with other economic and social indicators could also be used to evaluate the sustainability of current and future allocations pertaining to the implementation of the NWA. It was however noted that this requires vast amounts of accurate data.

APA, Harvard, Vancouver, ISO, and other styles

46

Raffel, Ann Eileen. "Methyl Halide Production by Calcareous Periphyton Mats from the Florida Everglades." PDXScholar, 2013. https://pdxscholar.library.pdx.edu/open_access_etds/1524.

Full text

Abstract:

Methyl halides are trace gases with both natural and anthropogenic origins. Once generated, these gases transport chlorine and bromine into the stratosphere, where they play an important role in ozone depleting catalytic cycles. The Florida Everglades is one location where methyl halide emissions have been proposed to be elevated due to high primary production and ionic halogens. This region also provides a unique study environment due to salt water intrusions, which occur during storm or low marsh water level-high tide events. The purpose of this research was twofold. First, quantification of methyl chloride (CH3Cl) and methyl bromide (CH3Br) production from periphyton mats on a temporal scale was needed. Secondly, to determine how varying concentrations of salinity affect CH3Cl and CH3Br production originating from calcareous periphyton mats within the Everglades. Periphyton was exposed to continuous 12 hour dark/light cycles in varying concentrations of salt water (0, 0.1, 1, 5, and 10 parts per thousand). All water samples were analyzed to determine the production rate of CH3Cl and CH3Br in periphyton samples using a gas chromatograph coupled with an electron capture detector (GC-ECD). Periphyton mats were found to be a producer of CH3Cl in all freshwater (0 parts per thousand) trials and sampling times; however, results from CH3Br analysis found production rates that suggest consumption occurred in the majority of the 0 parts per thousand trials. Production rates for CH3Cl ranged from 0.077 to 0.109 g-1hr-1 after 24 hours, 0.027 to 0.073 pM g-1hr-1 after 48 hours, and 0.034 to 0.047 pM g-1hr-1 after 72 hours. Production rates for the CH3Br freshwater experiments ranged from -0.00025 to 0.00185 pM g-1hr-1 after 24 hours, -0.00022 to -0.00078 pM g-1hr-1 after 48 hours, and -0.00042 to -0.00061 pM g-1hr-1 after 72 hours. This research has also shown that increased salinity does have a significant positive effect on the production of CH3Cl and CH3Br from calcareous periphyton mats, which is important in areas that could be prone to salt water intrusions or rising sea levels due to global climate change.

APA, Harvard, Vancouver, ISO, and other styles

47

Jern, Isacsson Gretha, and Robin Emilie Elfsberg. "Rösterna bakom den blågröna vågen och jordbruksrevolutionen - Alternativ livsmedelsproduktion i prat och praktik." Thesis, Malmö universitet, Fakulteten för kultur och samhälle (KS), 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:mau:diva-22319.

Full text

Abstract:

Sveriges livsmedelssystem står inför stora utmaningar såsom negativ miljöpåverkan och beroendet av att importera både livsmedel och insatsvaror. Livsmedelsproduktionen, som idag domineras av det konventionella jordbruket, har bland annat inneburit utarmade jordar och exploaterade resurser samt utsläpp av gifter. Studien syftar till att sammanställa och jämföra den vetenskapliga forskningen och samhällsdebatten angående alternativ livsmedels-produktion. Studien är avgränsad till att redogöra för produktionssystemen regenerativa jordbruk och akvaponiska system. Den vetenskapliga forskningen angående regenerativa jordbruk och akvaponiska system sammanställdes i ett kunskapsläge. En kvalitativ innehållsanalys utfördes för att identifiera och sammanställa samhällsdebatten kring systemen. Samhällsdebatten rörande de två alternativa livsmedelsproduktionssystemen bildade följande teman: den samordnande rösten, den offentliga rösten, forskarens röst, den operativa rösten, samt den övriga rösten. Inom dessa teman identifierades följande sex kodord: livsmedelsförsörjning, miljömässiga aspekter, ekonomiska aspekter, sociala aspekter, utmaningar samt möjligheter. I vår undersökning har vi inte formulerat några nya begrepp, däremot har vi funnit samband såväl som avvikelser och glapp mellan samhällsdebatten och den vetenskapliga forskningen.
Sweden's food system faces major challenges such as negative environmental impact and is dependent on importing both food and intermediate goods. Food production, which today is dominated by conventional agriculture, has meant, among other things, depleted soils and exploited resources as well as emissions of toxins. This study aims to compile and compare the scientific research and the public debate regarding alternative food production systems. The study is limited to account for the production systems regenerative agriculture and aquaponic systems. The scientific research regarding regenerative agriculture and aquaponic systems was compiled in a state of knowledge. A qualitative content analysis was performed to identify and compile the public debate about the systems. The public debate concerning alternative food production systems formed the following themes: the coordinating voice, the public voice, the researcher's voice, the operational voice, and the miscellaneous voice. Within these themes, the following six code words were identified: food supply, environmental aspects, economic aspects, social aspects, challenges and opportunities. In our study, we have not formulated any new concepts, however, we have found connections as well as discrepancies and gaps between the public debate and the scientific research.

APA, Harvard, Vancouver, ISO, and other styles

48

Madzimure, James. "Climate change adaptation and economic valuation of local pig genetic resources in communal production systems of South Africa." Thesis, University of Fort Hare, 2011. http://hdl.handle.net/10353/427.

Full text

Abstract:

The broad objective of the study was to determine the economic value of local pigs in marketand subsistence-oriented production systems in communal areas of Southern Africa. Data were collected from 288 households to investigate farmer perceptions, effects on pig production and handling of disease outbreaks such as classical swine fever (CSF) in market- and subsistenceoriented production systems. The utilisation of local pigs in these market- and subsistenceoriented production systems in improving people‟s welfare was evaluated. Climate change was identified by farmers in these production systems as a major constraint to pig production hence an experiment was carried out in the hottest season to determine diurnal heat-related physiological and behavioural responses in Large White (LW) and South African local pigs. The same genotypes were used to determine effects of diurnal heat-related stress on their growth performance. Choice experiment was done to determine farmer preferences for local pig traits and implicit prices for these traits in CSF-affected and unaffected areas that were under subsistence- and market-oriented production systems. In this experiment, the importance of heat tolerance was assessed relative to other productive and climate change adaptation traits. Significantly more pigs were culled in the CSF-affected areas that were market-oriented (8.0 ± 1.76) than subsistence-oriented (4.1 ± 1.00) production system. The risk of parasites and disease challenges was high in subsistence-oriented production system and coastal areas. In both production systems, CSF was perceived as destructive since the culling of pigs affected pork availability and income generation. The high risk of disease outbreaks and threat of climate change caused farmers in subsistence-oriented production system to select local pigs for their adaptive traits while those in the market-oriented production system focused on productive imported pigs. Farmers (83 %) indicated that they wanted pig genotypes that were adapted to climate change effects such as hot conditions. Local pigs were found to have superior heat tolerance over LW pigs (P < 0.05) in terms of lower heart rate and skin surface temperature. Frequency per day and duration for behavioural heat loss activities such as wallowing, sleeping in a prostrate posture and sprawling in slurry were also lower (P < 0.05) for local than LW pigs. The superiority of heat tolerance of local over LW pigs was further confirmed by their uncompromised growth performance under high diurnal temperatures. The Pearson‟s product moment correlation coefficient between temperature and feed conversion ratio for LW pigs was strongly positive (r = 0.50; P < 0.001) unlike the weak and positive correlation for local pigs (r = 0.20; P < 0.05). There was a quadratic relationship between temperature and average daily gain (ADG) for both pig genotypes. The regression coefficients for ADG were higher (P < 0.001) for LW than local pigs. It was concluded that at high ambient temperatures, performance of local pigs was less compromised than for LW pigs. Although local pigs were found to be heat tolerant, results of choice experiment showed that this trait was not selected for relative to other traits. Keeping pigs that required bought-in feeds, fell sick often and produced low pork quality (eating quality based on farmer perceptions) negatively affected farmers‟ livelihoods more in subsistence- than market-oriented production system. Farmers in market-oriented production system derived more benefit from productive traits such as heavier slaughter weights and large litter size than subsistence-oriented farmers. Under the subsistence-oriented production system, farmers in CSF-affected areas placed high prices on adaptive traits than the unaffected areas. Subsistence-oriented farmers who were affected by CSF wanted a total compensation price of R10 944.00 (USD1563.43) for keeping a pig genotype with unfavourable traits when compared to R4235.00 (USD605.00) for their CSF-unaffected counterparts. Implicit prices for traits could not be determined for market-oriented production system. It was concluded that farmers in CSFaffected areas placed high economic values on pig traits than farmers from the CSF-unaffected areas. The findings suggest that adapted local pigs can be promoted in subsistence-oriented production systems while productive imported pigs and their crosses with local pigs can be kept in market-oriented production systems.

APA, Harvard, Vancouver, ISO, and other styles

49

Stewart, Alan V. "Plant breeding aspects of ryegrasses (Lolium sp.) infected with endophytic fungi." Phd thesis, University of Canterbury. Lincoln College, 1987. http://theses.lincoln.ac.nz/public/adt-NZLIU20071005.172250/.

Full text

Abstract:

Some aspects of the presence of systemic endophytic fungi in agriculturally important New Zealand grasses were studied in relation to plant breeding. Seedling resistance to adult Argentine stem weevil feeding in perennial ryegrass, Italian ryegrass and tall fescue was found to be related to the presence of their respective Acremonium endophytes in the seed rather than to plant genetic resistance. In addition a study of perennial ryegrass revealed that this resistance was independent of endophyte viability. The seedling resistance conferred by the endophyte of Italian ryegrass was found to be beneficial for field establishment. This endophyte differs from that in perennial ryegrass and tall fescue in that it does not confer resistance to Argentine stem weevil on mature plants, but only on seedlings. The extent of plant genetic seedling tolerance to adult Argentine stem weevil feeding was limited to broad inter-specific differences, with tall fescue more tolerant than perennial ryegrass and both of these more tolerant than Italian ryegrass. This ranking corresponds with previous observations on feeding preference on mature plants. A study of factors affecting the concentration of endophyte mycelia in infected seed of perennial ryegrass revealed that plant genetic factors had little effect. The major factors studied were: 1) the endophyte concentration in the maternal parent plant directly influenced the endophyte concentration in the seed. 2) nitrogen fertilizer applications to a seed crop reduced the concentration of mycelia in the seed, with earlier applications having a greater effect. 3) application of the fungicide propiconazole (Tilt) to a seed crop reduced the endophyte concentration in the seed. 4) the endophyte concentration in the seed was found to directly influence the endophyte concentration in seedlings, six month old plants and that of seed harvested from a first year seed crop. As there have been no previous reports of tetraploid perennial ryegrass cultivars with endophyte an experiment was conducted to determine if these could be developed by the standard procedure of colchicine treatment. The results revealed that endophyte was retained following colchicine treatment.

APA, Harvard, Vancouver, ISO, and other styles

50

Beyers, Hendrik Philippus. "The effect of haloxyfop-R-methyl ester and imazamox herbicides, tine or no tillage and nine different medic cultivars on the seed and dry matter production as well as the quality of medic pastures." Thesis, Stellenbosch : Stellenbosch University, 2001. http://hdl.handle.net/10019.1/52517.

Full text

Abstract:

Thesis (MScAgric)--University of Stellenbosch, 2001.
ENGLISH ABSTRACT: The aim of this study was to determine the effect of a grass herbicide, a broadleaf herbicide with some grass control capabilities, method of tillage (tine and no-tillage) at planting of wheat as well as different medic cultivars on the regeneration, dry matter (OM) production and quality of a medic pasture. The trial was conducted at Langgewens experimental farm in the Swartland wheat producing area. Nine medic cultivars of three different species were evaluated after being sprayed with either haloxyfop-R-methyl (HAL) ester or imazamox (IMI) and subjected to either a tine tillage or a no tillage treatment at planting of wheat. Soil samples were taken during January 2000 to determine the size of the medic and weed seedbank as well as the degree of dormancy in the medic seeds, while OM samples were taken throughout the growing season to determine the OM production of the different medic cultivars and weed species. OM samples taken during October 1998 on the same pasture, were used to determine the crude protein (CP) and neutral detergent fibre (NOF) content of the pasture. The samples were subjected to in vitro digestion and the digestibility of pasture CP (OCP), NOF(ONOF) and DM (DOM)were determined. Results showed that seedling establishment differed between cultivars used, herbicide treatments applied as well as the crop stage in the rotation. The cultivars produced more seedlings where IMI was applied compared to HAL as well as where the area consisted of two year pasture compared to one year pasture (1998) and one year wheat (1999). After a year of pasture and a year of wheat, cultivars Sephi and Paraggio produced the most seedlings, while Caliph and Orion produced the least. Caliph however, showed a very high degree of seed dormancy while Orion's low seedling establishment was due to its sensitivity to the IMI herbicide used. Little difference was found between the nine cultivars early in the season (July - August) with regard to cumulative OM production, except for Orion, whose growth was severely damaged by the IMI treatment. At the end of the growing season (October), the cultivar Caliph's cumulative OM production (2010.1 kg/ha) was significantly higher than all the other cultivars, except for Parabinga (1053. 4 kg/ha). Oifferent pasture samples, of which the botanical composition was known, was analysed for CP, NOF, OOM, OCP and ONOF. There was no significant difference in pasture composition during 1998 but variation in the pasture composition did however cause the IMI treatment, compared to the HAL treatment, to have a lower ONOFand OOMcontent. A modelling procedure was used to predict the pasture quality parameters (CP, NOF, OOM,OCP and ONOF) from the pasture composition (medic hay, medic pods, grassy and broadleaf weeds). This prediction of CP, NOF, OOM, ONOF and OCP from the pasture components had a relative low accuracy (49 -74.1 %) and a further refinement of this model for possible use on farms in order to improve grazing management and animal production is advised. In conclusion it could be said that broadleaf weed control caused a definite increase in medic seed and OMproduction, but Orion should not be used with an IMI herbicide. All the cultivars, except for Orion, produced enough seedlings up to the second year to ensure sustainability of the medic pasture. All the cultivars, except for Orion, produced a sufficient amount of OM early in the growing season. Caliph however, produced by far the most OM later in the growing season. A reduction of broadleaf weeds and medic pods will increase the digestibility of NOFand OMand therefore increase the quality of the pasture. Pods however are an important part of summer forage and the aim should therefore rather be to reduce the number of broadleaf weeds in the pasture.
AFRIKAANSE OPSOMMING: Die doel van hierdie studie was om die effek van 'n gras en breëblaar onkruiddoder (wat sekere grasse beheer), metode van bewerking tydens die saai van koring asook nege verskillende medic kultivars op die regenerasie, droë materiaal produksie en kwaliteit van medic weidings te bepaal. Die proef is gedoen op Langgewens proefplaas wat geleë is in die Swartland koring produserende gebied. Nege medic kultivars is geëvalueer nadat die weiding met of haloxyfop-R-metiel ester (HAL) of imazamox (IMI) onkruiddoders gespuit is en onderwerp is aan of 'n vlak tand of geen bewerking tydens die saai van koring. Grondmonsters is geneem in Januarie 2000 om die grootte van die medic en onkruid saadbank asook om die graad van dormansie in die verskillende medic kultivars se sade te bepaal. Droë materiaal monsters is gedurende die 2000 groeiseisoen geneem om die droë materiaal produksie van die verskillende medic kultivars asook onkruid spesies te bepaal. Droë materiaal monsters is gedurende Oktober 1998 geneem en gebruik om die ruproteïn (CP) en neutraaloplosbare vesel (NDF) inhoud van die weiding te bepaal. Die monsters is in vitro verteer en die verteerbaarheid van CP (OCP), NDF (ONOF) en droë materiaal (DOM) is bepaal. Resultate wys dat saailing vestiging verskil tussen die verskillende kultivars wat gebruik is, verskillende onkruiddoder behandelings asook die stadium van die weidings/koring. Die kultivars het meer geproduseer waar die weiding met IMI behandel is in vergelyking met waar HAL toegedien is, asook waar koring nog nie gesaai is nie. Na 'n jaar van weiding en 'n jaar van koring, het die kultivars Sephi en Paraggio die meeste saailinge, en Caliph en Orion die minste saailinge gehad. Caliph het egter 'n hoë graad van dormansie in sy saad getoon, terwyl die swak vestiging van Orion die gevolg is van die kultivar se hoë sensitiwiteit teenoor IMI. Min verskil is gevind tussen die nege kultivars, vroeg in die groei seisoen (Julie - Augustus), wat kumulatiewe droë materiaal produksie betref, behalwe vir Orion wat erg beskadig is deur die IMI behandeling. Aan die einde van die groeiseisoen (Oktober 2000) was die kumulatiewe droë materiaal produksie van die kultivar Caliph (2010.1 kg/ha) betekenisvol hoër as al die ander kultivars behalwe vir Parabinga (1053.4 kg/ha). Weidingsmonsters, waarvan die botaniese samestelling bekend was, is ontleed vir CP, NDF, DDM, DCP en DNDF. Daar is geen betekenisvolle verskille gevind in die botaniese samestelling van die weidingmonsters geneem in 1998 nie,maar die variasie in botaniese samestelling het veroorsaak dat IMI in vergelyking met HAL 'n laer DNDF and DDM inhoud het. 'n Model is opgestel wat die weidingskomponente (medic hooi, medic peule, gras en breëblaar onkruide) gebruik om die kwaliteits parameters (CP, NDF, DDM, DCP en DNDF) van die weiding te skat. Hierdie skatting van CP, NDF, DDM, DCP en DNDF deur van die weidingskomponente gebruik te maak het 'n relatiewe lae akuraatheid gehad (49 -74.1 %) en verdere verfyning van hierdie model vir moontlike gebruik op plase, ten einde weidings bestuur en diere produksie te verbeter, word voorgestel. Die gevolgtrekking kan gemaak word dat breëblaar onkruidbeheer 'n definitiewe verbetering in die medic saailing en droë materiaal produksie van die medies te weeg gebring het, maar die kultivar Orion behoort nie saam met 'n IMI gebruik te word nie. AI die getoetste kultivars, behalwe Orion, het voldoende saad oorlewing vertoon tot en met die tweede jaar van die rotasie om lewensvatbaarheid van die sisteem te verseker en alle kultivars, behalwe Orion, het voldoende droë materiaal produseer vroeg in die groeiseisoen. Caliph het egter laat in die groeiseisoen by verre die meeste droë materiaal geproduseer. 'n Vermindering in die hoeveelheid breëblaar onkruide en peule in die weiding sal tot 'n verhoging in die verteerbaarheid van NDF en DM lei en dus 'n verhoging in die kwaliteit van die weiding tot gevolg hê. Peule is egter 'n belangrike bron van voedsel aan weidende diere gedurende droë somermaande en die verbetering van weidings moet eerder gedoen word deur te poog om breëblaar onkruide te beheer.

APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic 'Production Environmental aspects'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles