Log in

Relevant bibliographies by topics / Procedural card

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Procedural card'

Author: Grafiati

Published: 24 April 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Procedural card.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Procedural card"

1

Bennett, A., D. Abi-Saab, L. Karper, D. C. D'Souza, A. Abi-Dargham, D. Charney, and J. Krystal. "Ketamine impairs learning, but not procedural expression, on the wisconsin card sorting test." Schizophrenia Research 15, no. 1-2 (April 1995): 108–9. http://dx.doi.org/10.1016/0920-9964(95)95333-5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Gill, Lewis, E. Abigail Hathway, Eckart Lange, Ed Morgan, and Daniela Romano. "Coupling Real-Time 3D Landscape Models with Microclimate Simulations." International Journal of E-Planning Research 2, no. 1 (January 2013): 1–19. http://dx.doi.org/10.4018/ijepr.2013010101.

Full text

Abstract:

With urban design, it is becoming increasingly important to both visualise spatial changes and quantify the effect of these changes on the local microclimate: the former often for public consultation and the latter to develop landscapes that provide resilience to warmer weather thus reducing the urban heat island effect. It is possible to automatically construct 3D landscape models from vector site plans and height data sources through procedural generation. However, the generation of the inputs for microclimate models remains a time consuming process even though 3D visualisations or site plans may already exist. In this paper, a method to link procedurally generated 3D landscape models to microclimate simulations is demonstrated. Using this method, a case study is presented that allows initial calibration of the model and then several distinct alterations in the base design are tested alongside the variation in weather conditions looking forward to 2080. Finally, graphics card shaders are used to incorporate the temperature data within the interactive 3D procedural models, allowing both real-time manipulation of view point and simulation time.

APA, Harvard, Vancouver, ISO, and other styles

3

Usman, Muhammad, and Nabeel Taj Ghouri. "Reasons and Causes that Prevent Customers from Buying Consumer Banking Products in Pakistan." International Journal of Accounting and Financial Reporting 1, no. 1 (December 31, 2014): 549. http://dx.doi.org/10.5296/ijafr.v4i2.6868.

Full text

Abstract:

Consumer banking refers to that banking products and services which are directly given by banks to consumers that are personal loan, auto loan, house loan and credit card. . Customers face some problems while buying consumer banking products and services, such as high interest rate, lack of awareness, inappropriate service, arrangement of securities and procedural complications. This study aims to analyze the relationship between perceived problems and consumer banking products. Survey based methodology was used for data collection. For this purpose a close ended questionnaire was designed. The target population was Lahore Pakistan. Interest rate, customer service, security issues and procedural complications are proven to be the problems faced by the customers while buying consumer banking products. But lack of awareness proved to be wrong which means that respondents are aware of consumer banking products.

APA, Harvard, Vancouver, ISO, and other styles

4

Shaheen, Safdar, Muhammad Yousaf, and Mudassar Jalil. "A Smart Card Oriented Secure Electronic Voting Machine Built on NTRU." International Arab Journal of Information Technology 17, no. 3 (May 1, 2019): 386–93. http://dx.doi.org/10.34028/iajit/17/3/12.

Full text

Abstract:

Free and fair elections are indispensable to quantify the sentiments of the populace for forming the government of representatives in democratic countries. Due to its procedural variation from country to country and complexity, to maneuverer, it is a challenging task. Since the Orthodox paper-based electoral systems are slow and error-prone, therefore, a secure and efficient electoral system always remained a key area of research. Although a lot of literature is available on this topic. However, due to reported anomalies and weaknesses in American and France election in 2016, it once again has become a pivotal subject of research. In this article, we proposed a new secure and efficient electronic voting scheme based on public key cryptosystem dubbed as Number Theory Research Unit (NTRU). Furthermore, an efficient and robust three factors authentication protocol based on a personalized memorable password, a smartcard, and bioHash is proposed to validate the legitimacy of a voter for casting a legal vote. NTRU based blind signatures are used to preserve the anonymity and privacy of vote and voters, whereas the proficiency of secure and efficient counting of votes is achieved through NTRU based homomorphic tally. Non-coercibility and individual verifiability are attained through Mark Pledge scheme. The proposed applied electronic voting scheme is, secure, transparent and efficient for large scale elections.

APA, Harvard, Vancouver, ISO, and other styles

5

Donohue, J., M. Bailey, R. Gray, J. Holen, T. M. Huang, J. Keevan, C. Mattimiro, C. Putterman, A. Stalder, and J. Defreese. "Enzyme immunoassay system for panel testing." Clinical Chemistry 35, no. 9 (September 1, 1989): 1874–77. http://dx.doi.org/10.1093/clinchem/35.9.1874.

Full text

Abstract:

Abstract An immunoassay system based on enzyme immunoassay technology has been developed for quantitative panel testing. The system includes test card disposables, reagents, and an instrument. Patients' samples are processed semiautomatically in the instrument with minimum user intervention. The test card has multiple test areas at individual locations on a membrane solid phase so that simultaneous determinations from a single specimen are possible. Each panel also includes positive and negative reagent procedural controls. Factory-determined calibration curves for each analyte are provided in barcode form with each test kit. The reagents include a specimen dilution buffer, enzyme conjugate, and precipitogenic substrate. Up to 10 test cards at a time can be processed in random-access and continuous-access modes, with automated agitation of sample and reagents over the solid phase, temperature-controlled incubation, and membrane washing and reading, data reduction, and printout of results. The optical reader measures diffuse reflectance and features source intensity and wavelength compensation.

APA, Harvard, Vancouver, ISO, and other styles

6

Connolly, AnnaMarie, Darci Hansen, Kevin Schuler, Shelley L. Galvin, and Honor Wolfe. "Immediate Surgical Skills Feedback in the Operating Room Using “SurF” Cards." Journal of Graduate Medical Education 6, no. 4 (December 1, 2014): 774–78. http://dx.doi.org/10.4300/jgme-d-14-00132.

Full text

Abstract:

Abstract Background Ensuring residents develop operative skills requires application of the principles of guided learning, deliberate practice, and directed feedback. Objective We sought to create and implement a tool to promote procedural “key” step review and immediate feedback on surgical skills, and examined faculty and resident satisfaction with surgical skills feedback. Methods We created surgical skills feedback (SurF) cards for 8 gynecologic procedures. Faculty/fellows and residents completed prestudy surveys querying frequency of preoperative key step review and satisfaction with surgical skill feedback, a SurF card each time 1 of 8 procedures was performed, and poststudy surveys to evaluate for changes. Results Prestudy surveys were completed by 31 faculty/fellows and 20 residents, with 55% (17 of 31) of the faculty/fellows and 5% (1 of 20) of the residents reporting key step review before surgery. All reported low satisfaction rates with feedback frequency, quality, and timeliness. After implementation of SurF cards, preoperative key step review occurred in 78% (82 of 105) of the procedures. Twenty-one faculty/fellows (68%) and 16 residents (80%) completed our poststudy survey. Faculty/fellows reported statistically similar key step review (n = 15 [71%], P = .23), while residents reported that key step review had significantly improved (n = 6 [38%], P = .01). Resident satisfaction with feedback frequency (5% to 50%, P = .002) and quality (15% to 50%, P = .02) increased significantly. Conclusions The SurF cards we developed facilitated procedural key step review, were associated with significantly improved resident satisfaction with surgical feedback, and could prove helpful with outcomes assessments, such as Accreditation Council for Graduate Medical Education–required documentation of Milestone attainment.

APA, Harvard, Vancouver, ISO, and other styles

7

Delahunty, Ann, Rodney Morice, and Barry Frost. "Specific cognitive flexibility rehabilitation in schizophrenia." Psychological Medicine 23, no. 1 (February 1993): 221–27. http://dx.doi.org/10.1017/s0033291700039015.

Full text

Abstract:

SynopsisA Cognitive Shift neurocognitive training module was developed in the attempt to ameliorate cognitive flexibility deficits in chronic schizophrenic patients. A procedural training approach hypothesized the exercise of specific neural network processes, identified from theories of frontal and prefrontal lobe functioning. Three male patients who underwent the intensive program demonstrated significant gains in Wisconsin Card Sorting Test performance, gains that were maintained at a six month reassessment. Expanded Brief Psychiatric Rating Scale (a measure of symptomatology) and Life Skills Profile (a measure of daily functioning) measures showed smaller improvements. The ability to improve cognitive flexibility could have important implications for the treatment of schizophrenia.

APA, Harvard, Vancouver, ISO, and other styles

8

WANTCHEKON, LEONARD. "Strategic Voting in Conditions of Political Instability." Comparative Political Studies 32, no. 7 (October 1999): 810–34. http://dx.doi.org/10.1177/0010414099032007003.

Full text

Abstract:

This article presents a game theoretic model to explain the broad electoral support for the extreme right-wing party, the Nationalist Republican Alliance (ARENA), in the 1994 elections in El Salvador. Making use of poll data, the author shows that the deciding factor in this electoral outcome was not the procedural defects, the apathy of the electorate, or the disorganization of the opposition parties but, instead, uncertainty about the peace process. The model helps to explain why during the political campaign, ARENA played the “fear card” and why the peasants voted in such great numbers for a party opposed to the land reform that would greatly benefit them. The author argues that the Farabundo Marti National Liberation Front (FMLN) participated in the election not just to win but more to provide legitimacy for the new democratic process. The article concludes by discussing implications of the findings for the prospects for democratic consolidation in El Salvador.

APA, Harvard, Vancouver, ISO, and other styles

9

Bataineh, Omar, Tarek Al-Hawari, Hussam Alshraideh, and Dorid Dalalah. "A sequential TPM-based scheme for improving production effectiveness presented with a case study." Journal of Quality in Maintenance Engineering 25, no. 1 (March 11, 2019): 144–61. http://dx.doi.org/10.1108/jqme-07-2017-0045.

Full text

Abstract:

PurposeThe purpose of this paper is to improve production effectiveness of equipment by facilitating the implementation of the key principles of total productive maintenance (TPM).Design/methodology/approachA sequential TPM-based scheme consisting of 13 procedural steps is proposed. The steps cover the basic aspects of a generic improvement system, i.e. planning, implementation, checking, corrective action and control.FindingsThe proposed scheme was effective in increasing the overall equipment effectiveness by 62.6 percent over a nine-month period only. This was a direct reflection of improvements in equipment availability, efficiency and product quality. A positive feedback regarding the smooth implementation of the scheme was also received from the responsible maintenance staff.Research limitations/implicationsThe proposed scheme is intended mainly to the manufacturing industrial sector, which utilizes failure-prone equipment in running operations.Originality/valueThis study presents an original scheme that tries to avoid the many barriers of success frequently encountered during the implementation of TPM schemes, as reported in the literature. This scheme is unique in integrating between 5S and safety, health and environment initiatives, by capitalizing on the close relation between the two initiatives, and simplifying procedures for measuring how well the two initiatives are implemented in an organization in one score card. Different from previous studies, the scheme treats both “education and training” and 6S as a foundation to the core TPM principles.

APA, Harvard, Vancouver, ISO, and other styles

10

Reham Hassan Mohamed Tolba, Tariq Abdel Moneim Abdel Fattah, Reham Hassan Mohamed Tolba, Tariq Abdel Moneim Abdel Fattah. "The interaction between support patterns and visual design methods in an electronic training environment and its impact on developing skills for digital content production enhanced for the hearing-impaired and the trend towards digitalization among teache: التفاعل بين أنماط الدعم وأساليب التصميم البصري ببيئة تدريب إلكتروني وأثره في تنمية مهارات إنتاج المحتوى الرقمي المعزز للمعاقين سمعياً والاتجاه نحو الرقمنة لدى معلمي ذوي الاحتياجات الخاصة." مجلة العلوم التربوية و النفسية 5, no. 25 (July 28, 2021): 169–30. http://dx.doi.org/10.26389/ajsrp.s020221.

Full text

Abstract:

The aim of the current research is to measure the interaction between support patterns and visual design methods in an electronic training environment and its impact on developing the skills of digital content production enhanced for the hearing-impaired and the trend towards digitization. The hearing impaired) numbering 60 teachers and teachers, they were divided according to the visual design method, 30 teachers fixed visual design method, and then divided into two groups, according to the educational support pattern based on the support pattern (informational 15 teachers- the procedural 15 teachers), 30 teachers design style Visual animation, they were divided into two groups, according to the type of support based on support (informational 15 teachers- procedural 15 teachers), and the two researchers prepared the following research tools (achievement test related to the content presented- the trend towards digitalization scale- product evaluation card for digital content enhanced for the disabled. Audio), and one of the most important findings of the research is the positive impact of using support patterns and visual design methods with an electronic training environment and the integration between the high level of cognitive achievement and the high level of The techniques for producing enhanced digital content for the hearing-impaired, and the research recommends the importance of focusing on performance skills to train teachers with special needs and note their implementation because of their importance to them after that. In training the hearing-impaired students on the use of appropriate interaction tools in augmented reality-based learning to obtain electronic learning that is commensurate with their learning characteristics.

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Procedural card"

1

Cordero, Maria C. "Intranasal Midazolam Procedural Sedation in the Autistic Patient for Diagnostic Dental Procedures." The Ohio State University, 2012. http://rave.ohiolink.edu/etdc/view?acc_num=osu1339698995.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Nilsson, Andreas. "Patient-controlled sedation in procedural care." Doctoral thesis, Linköpings universitet, Avdelningen för läkemedelsforskning, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-112372.

Full text

Abstract:

The need for procedural sedation is extensive and on the increase in numbers of patients. Minor treatments or diagnostic procedures are being performed with inadequate sedation or even without any sedatives or analgesics. Also, sedation techniques that support advanced, high-quality, in-patient care procedures representing easy performance and rapid recovery are requested for increased effectiveness. In this doctoral thesis, patient-controlled sedation (PCS) using propofol and alfentanil for surgical and diagnostic procedures was studied. The overall aim was to study aspects of safety, procedural feasibility and patients’ experiences. The main hypothesis was that PCS using only propofol is a safe and effective method for the induction and maintenance of moderate procedural sedation. The studies included were prospective, interventional, and in some cases, randomized and double-blinded. Data on cardiopulmonary changes, level of conscious sedation (bispectral index and Observer’s assessment of alertness/sedation [OAA/S]), pain, discomfort, anxiety, nausea (visual analogue scales), interventions performed by nurse anaesthetists, surgeons’ evaluation of feasibility, procedure characteristics, recovery (Aldrete score) and pharmacokinetic simulation of concentrations of drugs at the effect site supported the analysis and comparison between PCS and anaesthetist-controlled sedation and propofol PCS with or without alfentanil. PCS can be adjusted to cover a broad range of areas where sedation is needed, which, in this thesis, included burn care, gynaecological out-patient surgery and endoscopic procedures for the diagnosis and treatment of diseases in the bile ducts (endoscopic retrograde cholangiopancreatography [ERCP]). PCS for burn wound treatment demands the addition of alfentanil, but still seems to be safe. PCS was preferred by the patients instead of anaesthetist-controlled sedation. The addition of alfentanil to PCS as an adjunct to gynaecological surgical procedures also using local anaesthesia increases the surgeon’s access to the patients, but impairs safety. Apnoea and other such conditions requiring interventions to restore respiratory function were seen in patients receiving both alfentanil and propofol for PCS. Patients’ experiencing perioperative pain and anxiety did not explain the effect-site concentrations of drugs. Different gynaecological procedures and patients’ weights seemed to best explain the concentrations. For discomfort and pain during the endoscopic procedure (ERCP), propofol PCS performs almost the same as anaesthetist-performed sedation. Overall, as part of the pre-operative procedures, PCS does not seem to be time-consuming. In respect to the perioperative perspective, PCS supports rapid recovery with a low incidence of tiredness, pain, and post-operative nausea and vomiting (PONV). The data suggest that PCS further needs to be adapted to the patient, the specific procedure and the circumstances of sedation for optimal benefit and enhanced safety.

APA, Harvard, Vancouver, ISO, and other styles

3

Zobl, Christoph. "Designing for Prehospital Care Training : Aiding the development of mental models within procedural memory, through a training toolkit that improves proficiency in prehospital care procedures such as REBOA." Thesis, Umeå universitet, Designhögskolan vid Umeå universitet, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-145237.

Full text

Abstract:

This is an educational design project exploring how prehospital care training can be altered to improve mental proficiency for emergency medical professionals. The London Air Ambulance performs a complex life-saving procedure known as REBOA (Resuscitative Endovascular Balloon Occlusion of the Aorta) on the roadside; the only emergency medical service to do so worldwide. Teams consisting of a doctor-paramedic pairing are required to perform at their peak in extreme environments, making training for such circumstances crucial. As a result, this project strategically maps current mental processes into a framework, identifying multiple design opportunities to approach chaotic accident scenes. The framework acts as the basis for defining a curriculum, which, using Instructional Design principles, develops into a learning programme that highlights how learners experience training activities to modify communication habits and on-scene behaviour. A three-part toolkit embodies this learning programme, functioning as a sensory guide to explicitly direct attention at pre-, mid- and post-procedure interaction events between team members.

APA, Harvard, Vancouver, ISO, and other styles

4

Drover, James R. "Modification of the infant contrast sensitivity card procedure." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2000. http://www.collectionscanada.ca/obj/s4/f2/dsk2/ftp03/MQ55503.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Elliott, David B. "Clinical procedures in primary eye care." Elsevier, 2020. http://hdl.handle.net/10454/18284.

Full text

Abstract:

No
From the publisher - Well organized and easy to read, Clinical Procedures in Primary Eye Care, 5th Edition, takes an accessible, step-by-step approach to describing the commonly used primary care procedures that facilitate accurate diagnosis and effective patient management. This practical, clinically-focused text offers succinct descriptions of today's most frequently encountered optometric techniques supported by research-based evidence. You’ll find essential instructions for mastering the procedures you need to know, including recent technical advances in the field.

APA, Harvard, Vancouver, ISO, and other styles

6

Bhandari, Nishchal. "Procedural synthetic data for self-driving cars using 3D graphics." Thesis, Massachusetts Institute of Technology, 2018. http://hdl.handle.net/1721.1/119745.

Full text

Abstract:

Thesis: M. Eng., Massachusetts Institute of Technology, Department of Electrical Engineering and Computer Science, 2018.
This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.
Cataloged from student-submitted PDF version of thesis.
Includes bibliographical references (pages 43-44).
In this thesis we present CoSy, a configurable system for procedurally generating synthetic data for self-driving vehicles. To address the problem of data hungry vision-based learning algorithms used in self-driving vehicles, we develop a system that generates synthetic images, including class level annotations, of street scenes. To give researchers control over how data is generated, our system is designed to be configurable and extendable. We provide two example datasets generated by our system, and provide extensive documentation on how the system is architected, and how it can be extended.
by Nishchal Bhandari.
M. Eng.

APA, Harvard, Vancouver, ISO, and other styles

7

Callaghan, Liam. "Investigating the clinical impact of procedural packs in secondary care." Thesis, Ulster University, 2016. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.697544.

Full text

Abstract:

Background: Clinical procedural packs were identified as an area of healthcare where an enhancement in design and implementation could improve practitioner performance and associated service user outcomes. Objectives: This study assessed the clinical impact of two interventions, (1) procedural packs with an enhanced training programme and (2) feedback system, on both blood culture sampling and PVC insertion procedures within Antrim Area Hospital. Study Design: A time series design study, using retrospective and prospective data, was used to evaluate impact of two interventions on complication rates associated with both procedures. Impact of the interventions was evaluated by comparing pre- and post- mean complication rates calculated through statistical process control p-chart analysis. Qualitative data gathered from practitioner focus group discussion and quantitative data from patient questionnaires further facilitated exploration of underlying issues. Results: A non-significant reduction in mean blood culture contamination rate was recorded from a Phase A baseline rate of 2.5%, with a reduction to 1.89% from Phase B intervention and to 1.47% from Phase C intervention, over a 30 month study, p = 0.066. However, regression analysis did show a significant downward trend of mean blood culture contamination rate over the 30 month study period, p = 0.015. A significant decrease in mean PVC clinical adverse event rates were recorded from a Phase A baseline rate of 12.84%, with a reduction to 9.48% from Phase B intervention (p = 0.008) and a further drop to 5.96% from Phase C intervention, over a 72 week study (p < 0.001). However, a high rate of PVC failures due to non-clinical adverse events was recorded through Phase A (22.30%), Phase B (31.80%) and Phase C (25.66%) of the study. Conclusions: The combination of best practice guidelines, procedural pack with an enhanced training programme and feedback system achieved and maintained optimal procedural practice.

APA, Harvard, Vancouver, ISO, and other styles

8

Williams, Hannah Washington. "Policies and Procedures to Address Respite Care." ScholarWorks, 2017. https://scholarworks.waldenu.edu/dissertations/3644.

Full text

Abstract:

Hospice services are utilized by more than 1.6 million people yearly, and there are a great number of caregivers who are tasked with caring for these individuals at home. Caregivers are at risk for fatigue, burnout, and decline in their own physical and mental health. While the Centers for Medicare and Medicaid Services (CMS) cover costs of temporary respite care for hospice patients, the caregivers' needs for respite care are often unrecognized and unaddressed. The purpose of this project was to plan a respite program within the hospice agency consisting of revised respite policy and procedures, the Caregiver Reaction Assessment (CRA) tool to routinely assess the caregiver for burnout and/or fatigue, and a detailed outline for the implementation of respite care. Anderson's behavioral model of service was used to guide the project's understanding of the underutilization of respite services. This project was guided by the practice-focused question examining the development of an evidence based caregiver respite program within the hospice agency. The program was developed based on a review of peer reviewed research studies and the input of a project team of local experts. The project team participated in the project that created a respite policy which includes a biweekly caregiver assessment and step-by-step directions on how to implement respite care. A final report was developed and submitted to the Hospice agency. This revised policy and procedure includes a blueprint for implementation and a full set of recommendations on the process, use of the CRA, educational in-services, and evaluative methods. These recommendations have the potential for positive social change by increasing patient and caregiver outcomes, serving as an example for other hospice agencies to follow, and improving care at the end of life.

APA, Harvard, Vancouver, ISO, and other styles

9

Cruz, M. D., A. M. Fernandes, and CR Oliveira. "CO75 - Epidemiology of procedural pain in neonatal intensive care units of Portugal." Bachelor's thesis, Secção de Neonatologia da Sociedade Portuguesa de Pediatria, 2015. http://hdl.handle.net/10174/17193.

Full text

Abstract:

A neonatologia é uma subespecialidade da pediatria relativamente nova iniciando-se como uma área altamente tecnológica e que tende a ser cada vez menos invasiva. Foram vários os avanços que permitiram uma redução da mortalidade do recém-nascido prematuro: o transporte in utero, os corticóides prenatais, o "milagre" do surfactante, cuidados regionalizados (de que Portugal é um bom exemplo), ... Com a evolução dos tempos a preocupação dos neonatologistas "transferiu-se" da mortalidade para a morbilidade, os cuidados passaram de centrados no doente a centrados na família, a ventilação tornou-se não invasiva, a maior importância da nutrição, sono, redução da infecção, luz, ruído e dor, variáveis conjuntas influenciando o neurodesenvolvimento.

APA, Harvard, Vancouver, ISO, and other styles

10

Johannesson, Eva. "Learning manual and procedural clinical skills through simulation in health care education." Licentiate thesis, Linköpings universitet, Sjukgymnastik, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-75505.

Full text

Abstract:

The general aim of this thesis was to contribute to a deeper understanding of students’ perceptions of learning in simulation skills training in relation to the educational design of the skills training. Two studies were conducted to investigate learning features, what clinical skills nursing students learn through simulation, and how. Undergraduate nursing students were chosen in both studies. Study I was conducted in semester three, and study II in semester six, the last semester. Twenty-two students in study I practised intravenous catheterisation in pairs in the regular curriculum with an additional option of using two CathSim® simulators. In study II, ten students practised urethral catheterisation in pairs, using the UrecathVision™ simulator. This session was offered outside the curriculum, one pair at a time. In study I, three questionnaires were answered - before the skills training, after the skills training and the third after the skills examination but before the students’ clinical practice. The questions were both closed and open and the answers were analysed with quantitative and qualitative methods. The results showed that the simulator was valuable as a complement to arm models. Some disadvantages were expressed by the students, namely that there was no arm model to hold and into which to insert the needle and that they missed a holistic perspective. The most prominent learning features were motivation, variation, realism, meaningfulness, and feedback. Other important features mentioned were a safe environment, repeated practice, active and independent learning, interactive multimedia and a simulation device that was easy to use. In study II the students were video-recorded during the skills training. Afterwards, besides open questions, the video was used for individual interviews as stimulated recall. The interview data were analysed with qualitative content analysis. Three themes were identified: what the students learn, how the students learn, and how the simulator can contribute to the students’ learning. When learning clinical skills through simulation, motivation, meaningfulness and confidence were expressed as important factors to take into account from a student perspective. The students learned manual and procedural skills and also professional behaviour by preparing, watching, practising and reflecting. From an educational perspective, variation, realism, feedback and reflection were seen as valuable features to be aware of in organising curricula with simulators. Providing a safe environment, giving repeated practice, ensuring active and independent learning, using interactive multimedia, and providing a simulation tool that is easy to use were factors to take into account. The simulator contributed by providing opportunities to prepare for skills training, to see the anatomy, to feel resistance to catheter insertion, and to become aware of performance ability. Learning features, revealed from the students’ thoughts and experiences in these studies, are probably general to some extent but may be used to understand and design clinical skills training in all health care educations. In transferring these results it is important to take the actual educational context into account.

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "Procedural card"

1

Procedures in critical care. New York: McGraw-Hill Professional, 2009.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

Hanson, C. William. Procedures in critical care. New York: McGraw-Hill Professional, 2009.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

Procedures in ambulatory care. New York: McGraw-Hill, 1987.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

Chernis, P. J. URL CADD System procedures. Pinawa, Man: AECL, Whiteshell Laboratories, 1993.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

Lippincott's nursing procedures. 6th ed. Philadelphia: Wolters Kluwer/Lippincott Williams & Wilkins Health, 2012.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

6

1934-, Grant Harvey D., ed. Handbook of emergency care procedures. Englewood Cliffs, N.J: Prentice Hall, 1988.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

7

Critical care procedures performance evaluation. Philadelphia: W.B. Saunders, 1994.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

8

Blodgett, Diane. Manual of respiratory care procedures. 2nd ed. Philadelphia: Lippincott, 1987.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

9

Jaffe, Marie S. Nursing procedures for home care. Albany, NY: Delmar Publishers, 1993.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

10

Demetriades, Demetrios, Kenji Inaba, and Philip D. Lumb, eds. Atlas of Critical Care Procedures. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-78367-3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Book chapters on the topic "Procedural card"

1

Lefebvre, Cedric W., Jay P. Babich, James H. Grendell, James H. Grendell, John E. Heffner, Ronan Thibault, Claude Pichard, et al. "Procedural Sedation." In Encyclopedia of Intensive Care Medicine, 1850. Berlin, Heidelberg: Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-00418-6_2092.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Çoruh, Başak, Amy E. Morris, and Patricia A. Kritek. "Procedural Complications." In Non-Pulmonary Complications of Critical Care, 187–211. New York, NY: Springer New York, 2014. http://dx.doi.org/10.1007/978-1-4939-0873-8_8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

McCue, Patrick M. "Routine Care." In Equine Reproductive Procedures, 521–26. Hoboken, NJ, USA: John Wiley & Sons, Inc, 2014. http://dx.doi.org/10.1002/9781118904398.ch160.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Brady, Anna K., and Rosemary Adamson. "Procedural Teaching." In Medical Education in Pulmonary, Critical Care, and Sleep Medicine, 235–54. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-10680-5_13.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Shin, Jin Woo. "Post-Procedural Care and Prognosis." In Spinal Epidural Balloon Decompression and Adhesiolysis, 219–31. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-15-7265-4_10.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Do, Thomas B., Mark A. Scheurer, and Andrew M. Atz. "Palliative Procedures." In Pediatric Critical Care Medicine, 323–28. London: Springer London, 2014. http://dx.doi.org/10.1007/978-1-4471-6359-6_24.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Fain, Timothy M., and Chris Teigland. "Common Urologic Procedures." In Interventional Critical Care, 287–95. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-25286-5_31.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Parry, Thomas, and Jeffrey Pepin. "Burn Care." In Atlas of Emergency Medicine Procedures, 529–33. New York, NY: Springer New York, 2016. http://dx.doi.org/10.1007/978-1-4939-2507-0_91.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

McBeth, Paul B., and Morad Hameed. "Emergency Critical Care Procedures." In Trauma Team Dynamics, 121–30. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-16586-8_17.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Lodi, Yahia M., Julius Gene Latorre, Jesse Corry, and Mohammed Rehman. "Care Following Neurointerventional Procedures." In Handbook of Neurocritical Care, 217–45. New York, NY: Springer New York, 2010. http://dx.doi.org/10.1007/978-1-4419-6842-5_13.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Procedural card"

1

Dawson, Richard W., Darrell Iler, and Kevin Koch. "New AAR Procedure Permitting Freight Car Life Beyond 50 Years." In ASME 2005 International Mechanical Engineering Congress and Exposition. ASMEDC, 2005. http://dx.doi.org/10.1115/imece2005-82848.

Full text

Abstract:

The Interchange Rules of the Association of American Railroads (AAR) limit the life of freight cars to 50 years from the date originally built. Recently, however, the AAR has instituted a new provision under Interchange Rule 88 that permits cars to operate for up to 65 years since their built date. The procedure incorporates two basic portions; demonstrating that the carbody has the structural integrity to last for a total life of 65 years and upgrading specific components on each car. After applying to the AAR Equipment Engineering Committee (EEC) requesting that ILS be granted to a particular group of cars, the car owner has two optional methods to demonstrate the structural integrity of the selected cars. The first option is to perform structural inspections on a specified number of representative cars and to perform a full-scale fatigue test on a test car. In place of the fatigue test, the second option is to perform structural inspections on a larger number of cars and conduct follow-up inspections every five years after receipt of approval. The physical fatigue test incorporates modern engineering best practices by utilizing finite element modeling and full-scale accelerated fatigue testing (AFT). Following the creation of a representative model, several load conditions, both real and worst-case, are then applied to determine the high-stress locations. Using instrumentation at the high-stress locations, a full-scale test is conducted with the car operating in a typical service environment. The objective of full-scale testing is to obtain real strain data and input loads produced by typical environment conditions. AFT enables the required load cycles to be applied to the test car in a dynamic test fixture in weeks or months versus years of actual service. A rapid accumulation of fatigue-damaging cycles representative of the remaining years necessary to bring the total life of the test car to 65 years are applied to the car. The requirements for the components to be replaced or upgraded under Rule 88 are similar to those for new cars and for rebuilt cars. Some components, such as air brake control valves, are to be upgraded to more recent standards. Others are to be replaced in kind with reconditioned parts. Even though the carbody is permitted to operate beyond 50 years, components must still comply with existing AAR and Federal Railroad Administration (FRA) age limits. In addition to obtaining Increased Life Status (ILS) from the AAR, the car owner must also apply to the Federal Railroad Administration for authorization to operate the cars beyond the 50-year limit of the FRA Freight Car Safety Standards. This paper will demonstrate the approval process, including AFT testing, as applied to two groups of flat cars in auto rack service, and a group of 60-foot flat cars.

APA, Harvard, Vancouver, ISO, and other styles

2

Chen, Tian, Paul Egan, Fritz Stöckli, and Kristina Shea. "Studying the Impact of Incorporating an Additive Manufacturing Based Design Exercise in a Large, First Year Technical Drawing and CAD Course." In ASME 2015 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/detc2015-47312.

Full text

Abstract:

Additive Manufacturing (AM) is a revolutionary technology in the manufacturing sector, although it has yet to become a cornerstone of formal engineering education. This paper discusses the procedure, result, and impact of incorporating physical prototyping, design iteration, and Design for Additive Manufacturing (DfAM) in a first-year, first-semester technical drawing and CAD course. In the course, students design balloon powered model car assemblies and are expected to learn core concepts of engineering design, such as modeling, assemblies, and tolerancing. The course consists of 473 students that each design up to two unique model cars. These model cars are fabricated using AM from these CAD designs and returned to students for assembly. Surveys are given to students to empirically validate the usefulness of incorporating AM in the course, with regards to motivating students and improving their ability to accurately translate imagined designs from CAD to physical products. The results show improvement in student intrinsic motivation concerning CAD processes. Student design abilities are also assessed: when student designs do not function as intended, it corresponds with a greater mismatch in how they imagine their CAD design in comparison to its final physical assembly. The mismatch on average decreases for students who design a second model car, which suggests an improvement in design skills. As a whole, our findings demonstrate the feasibility and benefits of including AM in a first-year course, particularly with respect to improving student motivation and their development of key CAD-related skills. Such motivation and skill development is particularly important early in an engineer’s career as it can impact their potential to learn and design over the course of their budding career.

APA, Harvard, Vancouver, ISO, and other styles

3

Tsumura, Ryosuke, and Hiroyasu Iwata. "Development of ultrasonography assistance robot for prenatal care." In Image-Guided Procedures, Robotic Interventions, and Modeling, edited by Baowei Fei and Cristian A. Linte. SPIE, 2020. http://dx.doi.org/10.1117/12.2550038.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

dos Santos, Wallas H. S., Paulo Ivson, and Alberto Barbosa Raposo. "CAD Shape Grammar: Procedural Generation for Massive CAD Model." In 2017 30th SIBGRAPI Conference on Graphics, Patterns and Images (SIBGRAPI). IEEE, 2017. http://dx.doi.org/10.1109/sibgrapi.2017.11.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

LI, Jiping, Wanrong GU, and Kai ZHU. "Procedural Representation Based Cross-CAD data Exchange." In 2020 International Symposium on Computer Engineering and Intelligent Communications (ISCEIC). IEEE, 2020. http://dx.doi.org/10.1109/isceic51027.2020.00033.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Wu, Nan, and Mei Wang. "The Integration of Procedural Information in Traditional Architectural Design on Perspective of Communication Theory." In CAD'18. CAD Solutions LLC, 2018. http://dx.doi.org/10.14733/cadconfp.2018.102-106.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Ahamad, A., CH Yadav, S. Ahuja, S. Nema, and P. K. Padhy. "PID tuning procedure based on simplified single parameter optimization." In 2013 International Conference on Control, Automation, Robotics and Embedded Systems (CARE). IEEE, 2013. http://dx.doi.org/10.1109/care.2013.6733730.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Carolan, Michael, Benjamin Perlman, and David Tyrell. "Crippling Test of a Budd Pioneer Passenger Car." In 2012 Joint Rail Conference. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/jrc2012-74087.

Full text

Abstract:

This research program was sponsored by the Federal Railroad Administration (FRA) Office of Research and Development in support of the advancement of improved safety standards for passenger rail vehicles. FRA and the Volpe National Transportation Systems Center (Volpe Center) have conducted a research program to develop alternative methods for demonstrating occupied volume integrity (OVI) of passenger rail cars using a combination of testing and analysis. Previous publications have addressed the planning and progress of a series of tests intended to examine the collision load path through the occupant volume of passenger cars equipped with crash energy management (CEM) systems. This program has included an elastic 800-kip buff strength test, two quasi-static tests that loaded a passenger car to its ultimate (crippling) capacity, and corresponding finite element (FE) analyses of each test. This paper discusses the two crippling tests and the companion FE analyses. One alternative method for evaluating OVI moves the applied loads from the line of draft to the collision load path. This alternative methodology also permits a combination of testing and analysis to be used to demonstrate the car’s OVI, in contrast to the conventional methodology (as prescribed in existing FRA regulations) which only permits testing. The alternative methodology was adopted as the recommendations developed by the Railroad Safety Advisory Committee’s (RSAC) Engineering Task Force (ETF) in its “Technical Criteria and Procedures for Evaluating the Crashworthiness and Occupant Protection Performance of Alternatively-Designed Passenger Rail Equipment for Use in Tier I Service.” The research program was undertaken to verify the efficacy of using a combination of elastic testing and plastic analysis to evaluate the OVI of a passenger car loaded along its collision load path as prescribed in the ETF report. Earlier in this research program an elastic test of a Budd Pioneer car was used to validate an FE model of the car, per the ETF’s procedures. This model was then modified to reflect the condition of the car in its crippling test configuration. The model was used to simulate the crippling behavior of the car, following the ETF’s procedures. Two Pioneer cars were then tested to crippling to provide additional data to validate the FE model and the proposed alternative OVI evaluation. Because the test cars used in this research program were equipped with CEM systems, the alternative evaluation loads were placed at the locations where the energy-absorbing components attached to the occupant volume. During both crippling tests, loads were measured at each energy-absorber support location on the live and restrained ends of the car. Additional instrumentation used in the second crippling test included strain gages on the major longitudinal structural members, displacement transducers at each load location, and vertical, lateral, and longitudinal displacement transducers on the underframe of the car. The results of the FE analysis compare favorably with the results of the crippling tests. In particular, the crippling loads are consistent between the tests and analysis: crippling loads for the first and second cars tested were 1.15 and 1.19 million pounds respectively, and the pre-test FEA estimated a crippling load of 1.19 million pounds. The research program has established a technical basis for the alternative OVI requirements and methodology.

APA, Harvard, Vancouver, ISO, and other styles

9

Shands, L., R. Turner, and G. Gefroh. "163. Eliminating Nitrous Oxide Exposure During Cryosurgical Procedures." In AIHce 1996 - Health Care Industries Papers. AIHA, 1999. http://dx.doi.org/10.3320/1.2764824.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Cerqueira, J. P., J. G. Machado, M. Ramos, J. S. S. Melo, and L. M. Brasil. "Simulation of surgical procedures with Jchai3D." In 2012 Pan American Health Care Exchanges (PAHCE 2012). IEEE, 2012. http://dx.doi.org/10.1109/pahce.2012.6233428.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Procedural card"

1

Plet, F. C. CARDCON: a procedure for archiving card decks on tape. Natural Resources Canada/ESS/Scientific and Technical Publishing Services, 1985. http://dx.doi.org/10.4095/315223.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Ashley, Paul, and Anthony Muse. Habitat Evaluation Procedures Report; Carl Property - Yakama Nation. Office of Scientific and Technical Information (OSTI), February 2008. http://dx.doi.org/10.2172/947119.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Philipson, Tomas, and Anupam Jena. Surplus Appropriation from R&D and Health Care Technology Assessment Procedures. Cambridge, MA: National Bureau of Economic Research, February 2006. http://dx.doi.org/10.3386/w12016.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Hadjit, Rabah, Marc Brughmans, and Hirotaka Shiozaki. Application of Fast Body Optimization Procedures to Shorten Car Development Cycles. Warrendale, PA: SAE International, May 2005. http://dx.doi.org/10.4271/2005-08-0017.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

SMITH, S. G. ENRAF Series 854 Advanced Technology Gauge (ATG) with SPU ll Card for Leak Detector Use Acceptance Test Procedure. Office of Scientific and Technical Information (OSTI), August 1999. http://dx.doi.org/10.2172/797708.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

SMITH, S. G. ENRAF Series 854 Advanced Technology Gauge (ATG) with SPU II card for Leak Detector Use Acceptance Test Procedure. Office of Scientific and Technical Information (OSTI), October 1999. http://dx.doi.org/10.2172/798116.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

W, Nedra, Laura B. Strange, Sara M. Kennedy, Katrina D. Burson, and Gina L. Kilpatrick. Completeness of Prenatal Records in Community Hospital Charts. RTI Press, February 2018. http://dx.doi.org/10.3768/rtipress.2018.rr.0032.1802.

Full text

Abstract:

We describe the completeness of prenatal data in maternal delivery records and the prevalence of selected medical conditions and complications among patients delivering at community hospitals around Atlanta, Georgia. Medical charts for 199 maternal-infant dyads (99 infants in normal newborn nurseries and 104 infants in newborn intensive care nurseries) were identified by medical records staff at 9 hospitals and abstracted on site. Ninety-eight percent of hospital charts included prenatal records, but over 20 percent were missing results for common laboratory tests and prenatal procedures. Forty-nine percent of women had a pre-existing medical condition, 64 percent had a prenatal complication, and 63 percent had a labor or delivery complication. Missing prenatal information limits the usefulness of these records for research and may result in unnecessary tests or procedures or inappropriate medical care.

APA, Harvard, Vancouver, ISO, and other styles

8

WHITE, D. A. 241-AZ-101 Mixer Pump Demonstration Test Gamma Cart Acceptance Test Procedure and Quality Test Plan (ATP and QTP). Office of Scientific and Technical Information (OSTI), March 2000. http://dx.doi.org/10.2172/801905.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

WHITE, D. A. 241-AZ-101 Mixer Pump Demonstration Test Gamma Cart Acceptance Test Procedure and Quality Test Plan (ATP and QTP). Office of Scientific and Technical Information (OSTI), January 2000. http://dx.doi.org/10.2172/801142.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Chou, Roger, Rongwei Fu, Tracy Dana, Miranda Pappas, Erica Hart, and Kimberly M. Mauer. Interventional Treatments for Acute and Chronic Pain: Systematic Review. Agency for Healthcare Research and Quality (AHRQ), September 2021. http://dx.doi.org/10.23970/ahrqepccer247.

Full text

Abstract:

Objective. To evaluate the benefits and harms of selected interventional procedures for acute and chronic pain that are not currently covered by the Centers for Medicare & Medicaid Services (CMS) but are relevant for and have potential utility for use in the Medicare population, or that are covered by CMS but for which there is important uncertainty or controversy regarding use. Data sources. Electronic databases (Ovid® MEDLINE®, PsycINFO®, the Cochrane Central Register of Controlled Trials, and the Cochrane Database of Systematic Reviews) to April 12, 2021, reference lists, and submissions in response to a Federal Register notice. Review methods. Using predefined criteria and dual review, we selected randomized controlled trials (RCTs) for 10 interventional procedures and conditions that evaluated pain, function, health status, quality of life, medication use, and harms. Random effects meta-analysis was conducted for vertebral compression fracture; otherwise, outcomes were synthesized qualitatively. Effects were classified as small, moderate, or large using previously defined criteria. Results. Thirty-seven randomized trials (in 48 publications) were included. Vertebroplasty (13 trials) is probably more effective at reducing pain and improving function in older (>65 years of age) patients, but benefits are small (less than 1 point on a 10-point pain scale). Benefits appear smaller (but still present) in sham-controlled (5 trials) compared with usual care controlled trials (8 trials) and larger in trials of patients with more acute symptoms; however, testing for subgroup effects was limited by imprecision. Vertebroplasty is probably not associated with increased risk of incident vertebral fracture (10 trials). Kyphoplasty (2 trials) is probably more effective than usual care for pain and function in older patients with vertebral compression fracture at up to 1 month (moderate to large benefits) and may be more effective at >1 month to ≥1 year (small to moderate benefits) but has not been compared against sham therapy. Evidence on kyphoplasty and risk of incident fracture was conflicting. In younger (below age for Medicare eligibility) populations, cooled radiofrequency denervation for sacroiliac pain (2 trials) is probably more effective for pain and function versus sham at 1 and 3 months (moderate to large benefits). Cooled radiofrequency for presumed facet joint pain may be similarly effective versus conventional radiofrequency, and piriformis injection with corticosteroid for piriformis syndrome may be more effective than sham injection for pain. For the other interventional procedures and conditions addressed, evidence was too limited to determine benefits and harms. Conclusions. Vertebroplasty is probably effective at reducing pain and improving function in older patients with vertebral compression fractures; benefits are small but similar to other therapies recommended for pain. Evidence was too limited to separate effects of control type and symptom acuity on effectiveness of vertebroplasty. Kyphoplasty has not been compared against sham but is probably more effective than usual care for vertebral compression fractures in older patients. In younger populations, cooled radiofrequency denervation is probably more effective than sham for sacroiliac pain. Research is needed to determine the benefits and harms of the other interventional procedures and conditions addressed in this review.

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!