Academic literature on the topic 'Procédés solaires'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Procédés solaires.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "Procédés solaires"
Mouhoub, Ahmed. "Procédés Technologiques Alternatifs de Réalisation des Photopiles Solaires au Silicium Cristallin." Journal of Renewable Energies 4, no. 1 (June 30, 2001): 11–22. http://dx.doi.org/10.54966/jreen.v4i1.994.
Full textNouah, Noureddine, Kahina Dahmani, Nabil Djennaoui, and Meziane Brahimi. "Estimation du flux de masse et de chaleur d’une installation de distillation à détentes étagées (MSF) couplée à un capteur cylindro parabolique pour le dessalement d’eau de mer." Journal of Renewable Energies 16, no. 3 (October 22, 2023): 499–506. http://dx.doi.org/10.54966/jreen.v16i3.394.
Full textMechlouch, Ridha Fethi, Atef El Jery, and Ammar Ben Brahim. "Choix d'un modèle d'ensoleillement et détermination des inclinaisons optimales des capteurs héliothermiques pour la ville de gabes en Tunisie." Journal of Renewable Energies 6, no. 1 (June 30, 2003): 1–14. http://dx.doi.org/10.54966/jreen.v6i1.956.
Full textJung, Daniel, Nicolas Roux, Cyrille Lemoine, and Jérôme Pannejon. "Modélisation d'un procédé de séchage solaire de boues urbaines." Journal Européen des Systèmes Automatisés 44, no. 4-5 (May 30, 2010): 393–407. http://dx.doi.org/10.3166/jesa.44.393-407.
Full textTernon, Céline, Anne Kaminski, Delphine Constantin, Lionel Claudon, Fabien Volpi, Loïc Vincent, Quentin Rafhay, and Ahmad Bsiesy. "Simulation, élaboration et caractérisation de cellules photovoltaïques." J3eA 13 (2014): 0011. http://dx.doi.org/10.1051/j3ea/2015013.
Full textEl Amrani, Abdelkader, Achour Mahrane, Mohamed Fathi Moussa, and Yacine Boukennous. "Procédé d’encapsulation des modules photovoltaïques type mono-verre." Journal of Renewable Energies 9, no. 1 (April 30, 2006): 37–42. http://dx.doi.org/10.54966/jreen.v9i1.812.
Full textSène, Diatta, Adama Sarr, and Mouhamadou Falilou Ndiaye. "Comparative study of the power output of a mobile PV panel and a fixed PV panel." Journal de Physique de la SOAPHYS 2, no. 1a (February 13, 2021): C20A02–1—C20A02–6. http://dx.doi.org/10.46411/jpsoaphys.2020.01.02.
Full textSekeruš, Pavle, and Ivana Živančević Sekeruš. "LA LECTURE FRANÇAISE DE MILUTIN MILANKOVIĆ." Годишњак Филозофског факултета у Новом Саду 46, no. 3 (January 11, 2022): 193–202. http://dx.doi.org/10.19090/gff.2021.3.193-202.
Full textGrelet, Patrick. "La photométrie des sources colorées, un problème récalcitrant : L’apport de deux savants discrets, Jules Macé de Lépinay et William Nicati." Revue d'histoire des sciences Tome 76, no. 1 (June 15, 2023): 135–72. http://dx.doi.org/10.3917/rhs.761.0135.
Full textBayoudh, Aida, and Jalila Sghaier. "Séchage solaire des feuilles de menthe verte." Journal of Renewable Energies 17, no. 3 (October 19, 2023). http://dx.doi.org/10.54966/jreen.v17i3.457.
Full textDissertations / Theses on the topic "Procédés solaires"
Belghith, Mohamed. "Elaboration d'absorbeurs sélectifs solaires : optimisation de procédés et caractérisation des matériaux." Toulouse 3, 1995. http://www.theses.fr/1995TOU30189.
Full textCalvet, Nicolas. "Stockages thermiques performants et durables pour procédés solaires : des basses aux hautes températures." Perpignan, 2010. http://www.theses.fr/2010PERP0002.
Full textDejean, Guilhem. "Valorisation de laitiers sidérurgiques comme matériaux de stockage thermique pour procédés énergétiques durables : application au CSP et au CAES." Perpignan, 2014. http://www.theses.fr/2014PERP1252.
Full textElorza-Ricart, Enrique. "Génie des procédés thermochimiques solaires : application à la dissociation therlique, suivie de trempe, de l'oxyde de zinc." Vandoeuvre-les-Nancy, INPL, 2002. http://www.theses.fr/2002INPL031N.
Full textJannot, Yves. "Production d'eau, d'air frais et conservation des produits par des procédés solaires rustiques : possibilités d'application en zone sahélienne." Vandoeuvre-les-Nancy, INPL, 1991. http://www.theses.fr/1991INPL076N.
Full textDonsanti, Frédérique. "Comparaison de procédés de dépôt de couches minces semiconductrices à partir de précurseurs organométalliques : cas des réacteurs à flux alternes en phase vapeur (ALCVD) et réacteur plasma diode hors équilibre (PACVD)." Paris 6, 2003. http://www.theses.fr/2003PA066098.
Full textDi, Giacomo Laurie. "PACVD/PVD de multicouches sélectives pour la conversion thermodynamique de l'énergie solaire." Thesis, Perpignan, 2017. http://www.theses.fr/2017PERP0042.
Full textIn concentrated solar power (CSP) plants, solar flux is concentrated on receivers to heat a transfer fluid up to 600°C. In order to improve their optical properties, these receivers can be covered by multilayered spectrally selective coatings. This work is devoted to designing and developing innovative spectrally selective structures showing strong absorption (low reflectivity) in the visible and near infrared range and low emissivity (high reflectivity) in the infrared range. We developed such stacks associating a refractory metal with high IR reflectivity and a ceramic which improves absorption in the visible range and thermal stability. The coatings were synthesized by plasma techniques, combining PACVD and PVD. Pre-industrial process feasibility, its development and optimization through the design of an innovative reactor, layer deposition and characterization, their combination in efficient optically selective stacks and the study of their aging have been achieved
Tsin, Fabien. "Développement d'un procédé sur grande surface d'électrodépôt d'oxyde de zinc comme contact avant transparent et conducteur de cellules solaires à base de Cu(In,Ga)Se2." Thesis, Paris 6, 2016. http://www.theses.fr/2016PA066311/document.
Full textCu(In,Ga)(S,Se)2 (CIGS) thin films based solar cells are a promising technology for high efficiency energy conversion. A window layer completes the stack of the cell. It is commonly constituted by an intrinsic and aluminum doped bi-layer of zinc oxide (ZnO) deposited by magnetron sputtering, an expensive vacuum process. Alternative processes, using low cost and atmospheric techniques, have been developed in order to reduce the costs. The aim of this work was to achieve a functional window layer of ZnO by a photo-assisted electrodeposition process on large scale substrates of CIGS/CdS in aqueous medium and replace the sputtered one. For this purpose, several studies have been carried out in order to determine the optoelectronic properties such as doping level and mobilities of the electrodeposited ZnO and optimize the deposition process. Firstly, the effect of three different electrolytes on the zinc oxide properties and doping has been studied on metallic substrate: chloride medium (Cl-), perchlorate medium (ClO4-) and a mixed medium of perchlorate with boric acid (H3BO3). Then, electrochemical synthesis of zinc oxide as window layer has been performed on CIGS/ CdS substrates. This study allowed to establish the need to synthesize an in situ seed layer which promotes the growth and the compactness of the final layer of zinc oxide. This two-step method has led to the achievement of high photovoltaic performances on large scale with promising efficiencies up to 14.3 % for a solar cell made entirely by atmospheric processes
Martins, Matthieu. "Nouveau procédé thermo-hydraulique appliqué au rafraîchissement solaire de l’habitat : analyse et optimisation thermodynamiques." Perpignan, 2010. http://www.theses.fr/2010PERP1020.
Full textIn recent years, efforts were made in developing environmental-friendly technologies. Cooling systems are one of the most apparent applications of this source of renewable energy. Indeed the use of solar energy for air conditioning allows synchronization between cooling needs and solar energy availability. This paper presents a novel solar cooling process (so-called CHV3T) using common flat plate collectors. Firstly, the performances of the process are evaluated throughout an energy balance in steady state. A modeling of the whole process is developed by using the concept of equivalent Gibbs systems to describe the dynamic behavior of all the components of the system. The main objective of the modeling is to provide a design tool for this thermal-hydraulic system. A 6 kW cooling capacity prototype coupled to 20 m² of flat plate solar collectors has been realized
Kallel, Sami. "Elaboration et caractérisation de couches minces de silicium poly cristallin déposées par RT-LPCVD et dopées in situ au phosphore : application à la réalisation de cellules solaires par procédés thermiques rapides." Lyon, INSA, 1999. http://www.theses.fr/1999ISAL0054.
Full textThe first part of this work consists on the study of silicon thin layer deposited by RT-LPCVD and doped in situ to the phosphorus in a reactor to halogens lamps and to cold-wall, from silane (SiH4) used as precursory gas and the phosphine (PH3) as doping source. We have studied these layers in a range of temperatures going from 600°C to 850°C (for a pressure of 2mbar) and we have put in obviousness the effect of the phosphine on the kinetic of deposit as well as on its physical properties (grain size, texture, residual stresses, resistivity). We have also shown that ulterior rapid thermal processing (RTA) favor an increase of the grain size, a relaxation of stresses and an improvement of the resistivity. In the second part of the work, we have applied rapid thermal processes for the realization of solar cells to weak thermal budget. In order that, we have studied and optimized each necessary stage for the realization of a such device : -1. The emitter (N+) obtained by the deposit RT-LPCVD doped in situ from (SiH4/PH3),-2. The passivation oxide obtained by rapid thermal oxidation (RTO),-3. The antireflet layer (Si3N4) deposited by RT-LPCVD from silane and the ammonia (NH3),-4. Metallic contacts deposited by evaporation. The first results obtained indicate an energy conversion of 1 0. 5%, a shortcircuit current density around 33. 5mA/cm2 and open-circuit voltage equal to 527mV
Books on the topic "Procédés solaires"
Ricaud. Photopiles solaires: De la physique de la conversion photovoltaïque aux filières, matériaux et procédés. Presses Polytechniques et, 1997.
Find full textBook chapters on the topic "Procédés solaires"
"Nanoencapsulation de filtres solaires via nanoémulsions Angélica M. VILLARREAL,, Cormarie FERNANDEZ, Ana FORGIARINI, Laura MARQUEZ, Françoise NIELLOUD, Jean-Louis SALAGER." In Procédés et formulations au service de la santé, 5–18. EDP Sciences, 2020. http://dx.doi.org/10.1051/978-2-7598-0939-4-002.
Full text"Nanoencapsulation de filtres solaires via nanoémulsions Angélica M. VILLARREAL,, Cormarie FERNANDEZ, Ana FORGIARINI, Laura MARQUEZ, Françoise NIELLOUD, Jean-Louis SALAGER." In Procédés et formulations au service de la santé, 5–18. EDP Sciences, 2020. http://dx.doi.org/10.1051/978-2-7598-0939-4.c002.
Full text