Log in

Relevant bibliographies by topics / Printing strategies

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers

Academic literature on the topic 'Printing strategies'

Author: Grafiati

Published: 28 June 2021

Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Printing strategies.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Printing strategies"

1

Mejtoft, Thomas. "Strategies for Successful Digital Printing." Journal of Media Business Studies 3, no. 1 (March 2006): 53–74. http://dx.doi.org/10.1080/16522354.2006.11073469.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Cendrero, Adrián Martínez, Gabriele Maria Fortunato, Juan Manuel Munoz-Guijosa, Carmelo De Maria, and Andrés Díaz Lantada. "Benefits of Non-Planar Printing Strategies Towards Eco-Efficient 3D Printing." Sustainability 13, no. 4 (February 3, 2021): 1599. http://dx.doi.org/10.3390/su13041599.

Full text

Abstract:

The present work focuses on studying and demonstrating the potential benefits of non-planar printing, as compared to conventional 3D printing, in terms of improved eco-impacts. To this end, a case study of a medical or ergonomic device, which may benefit from non-planar printing in different ways, is completely developed and manufactured employing alternative approaches, which are quantified, as regards production costs and environmental impacts. Three 3D printing processes are used: two of them relying on non-planar printing, one using conventional 2D printing trajectories. Relevant benefits are achieved thanks to the possibility, enabled by non-planar 3D printing, of manufacturing products upon reusable rapid tools. These support tools constitute an interesting alternative to the support meshes generally employed in additive manufacturing, which are normally a relevant source of waste and involve costly post-processes.

APA, Harvard, Vancouver, ISO, and other styles

3

Kloft, Harald, Martin Empelmann, Norman Hack, Eric Herrmann, and Dirk Lowke. "Reinforcement strategies for 3D‐concrete‐printing." Civil Engineering Design 2, no. 4 (August 2020): 131–39. http://dx.doi.org/10.1002/cend.202000022.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Petcu, Eugen B., Rajiv Midha, Erin McColl, Aurel Popa-Wagner, Traian V. Chirila, and Paul D. Dalton. "3D printing strategies for peripheral nerve regeneration." Biofabrication 10, no. 3 (March 23, 2018): 032001. http://dx.doi.org/10.1088/1758-5090/aaaf50.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Heinrichsdobler, Armin, Julia Christina Roigk, Frank Schirmeier, Christoph Josef Brabec, and Thomas Wehlus. "Pinhole-Free Inkjet Printing Strategies for Organic Electronics." Advanced Materials Technologies 2, no. 12 (October 9, 2017): 1700166. http://dx.doi.org/10.1002/admt.201700166.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Ahmed, Waleed, Fady Alnajjar, Essam Zaneldin, Ali H. Al-Marzouqi, Munkhjargal Gochoo, and Sumayya Khalid. "Implementing FDM 3D Printing Strategies Using Natural Fibers to Produce Biomass Composite." Materials 13, no. 18 (September 13, 2020): 4065. http://dx.doi.org/10.3390/ma13184065.

Full text

Abstract:

Current environmental concerns have led to a search of more environmentally friendly manufacturing methods; thus, natural fibers have gained attention in the 3D printing industry to be used as bio-filters along with thermoplastics. The utilization of natural fibers is very convenient as they are easily available, cost-effective, eco-friendly, and biodegradable. Using natural fibers rather than synthetic fibers in the production of the 3D printing filaments will reduce gas emissions associated with the production of the synthetic fibers that would add to the current pollution problem. As a matter of fact, natural fibers have a reinforcing effect on plastics. This review analyzes how the properties of the different polymers vary when natural fibers processed to produce filaments for 3D Printing are added. The results of using natural fibers for 3D Printing are presented in this study and appeared to be satisfactory, while a few studies have reported some issues.

APA, Harvard, Vancouver, ISO, and other styles

7

Gao, Meng, Lihong Li, and Yanlin Song. "Inkjet printing wearable electronic devices." Journal of Materials Chemistry C 5, no. 12 (2017): 2971–93. http://dx.doi.org/10.1039/c7tc00038c.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Kratochvíl, Jiří, Marek Sadílek, Václav Musil, Marek Pagáč, and Dana Stančeková. "THE EFFECTIVENESS OF STRATEGIES PRINTING PRINTER EASY 3D MAKER." Advances in Science and Technology Research Journal 12, no. 2 (June 1, 2018): 197–205. http://dx.doi.org/10.12913/22998624/91890.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Shen, Shi, Mingxue Chen, Weimin Guo, Haojiang Li, Xu Li, Suqiong Huang, Xujiang Luo, et al. "Three Dimensional Printing-Based Strategies for Functional Cartilage Regeneration." Tissue Engineering Part B: Reviews 25, no. 3 (June 2019): 187–201. http://dx.doi.org/10.1089/ten.teb.2018.0248.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Wisser, F. M., B. Schumm, G. Mondin, J. Grothe, and S. Kaskel. "Precursor strategies for metallic nano- and micropatterns using soft lithography." Journal of Materials Chemistry C 3, no. 12 (2015): 2717–31. http://dx.doi.org/10.1039/c4tc02418d.

Full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Printing strategies"

1

Mejtoft, Thomas. "Strategies in the digital printing value system." Licentiate thesis, Stockholm : Media Technology and Graphic Arts, School of Computer Science and Communication, Royal Institute of Technology (KTH), 2006. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-4165.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Leggett, Suzanne McCarthy. "Volatile organic compound emission reduction strategies for industrial printing and coating processes." Thesis, Imperial College London, 1997. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.264655.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Křivohlavý, Petr. "Aditivní výroba prostorových prutů z polymerních materiálů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-442803.

Full text

Abstract:

This thesis is focused on creating polymer lattice struts without any necessary support in full length using robotic 3D printing. The aim of the thesis is to find suitable process parameters and printing strategies with respect to the accuracy of the polymer struts. A statistical model of effects of individual process parameters has been produced to achieve stated objectives. The model enables finding optimal process parameters. The printing strategies for thus established process parameters are tested to increase the accuracy of the finished print and the quality of the bonds between individual struts. The accuracy assessment is executed using optical 3D metrology. The maximum deviation from the nominal shape 0.54mm has been accomplished using discovered process parameters and printing strategies.

APA, Harvard, Vancouver, ISO, and other styles

4

Das, Subhankar. "Last-time-build strategies of spare parts with the advent of 3D printing technology." Thesis, Massachusetts Institute of Technology, 2017. http://hdl.handle.net/1721.1/112062.

Full text

Abstract:

Thesis: S.M. in Engineering and Management, Massachusetts Institute of Technology, School of Engineering, System Design and Management Program, 2017.
Cataloged from PDF version of thesis.
Includes bibliographical references (page 49).
Forecasting demand and managing spare part inventory has long been a challenge for products that have a very long lifecycle time. With demand being discrete, low and sporadic, understanding of the actual demand is erroneous and hence forecasting the right demand for a Last-Time-Build has been difficult. Managers routinely build buffer stock to avoid missing contractual agreements, with extremely high penalties for running out of stock. Thus, Last-Time- Build strategies have been expensive and non-profit yielding. With the advent of 3D printing technology and its superiority in terms of the ability to setup shop at a low cost and print parts as and when required, make it a very promising technology in solving the issue of spare part inventory management. In this thesis, a model-based approach was taken to the decision making of Last-Time-Build. By use of financial modeling and non-linear optimization tools, optimal strategies to best use 3D printing technology have been recommended, under several conditions of demand uncertainty. The most optimal results are achieved when a Hybrid approach is employed. The Hybrid approach is a combination of a Last-Time-Build via traditional manufacturing method that is supplemented with parts printed via 3D printer, to cater to changing demand, at a future point of time. The model helps in determining the best combination of parts that need to be built ahead and the parts that can be built later via 3D printing for various demand projections and a given service level that needs to be met. The sensitivity of each of the different variables involved on the decision making is also highlighted. The higher the uncertainty in demand, the more lucrative is the hybrid approach to solving the problem of spare part inventory management.
by Subhankar Das.
S.M. in Engineering and Management

APA, Harvard, Vancouver, ISO, and other styles

5

McAllister, Walter Elliot. "A Critical Review of Multi-Phase Materials and Optimization Strategies for Additive Printing Technologies." Thesis, Virginia Tech, 2013. http://hdl.handle.net/10919/76789.

Full text

Abstract:

The focus of this thesis is the critical review of Additive Printing (AP) or 3D-printing, and optimization strategies for the introduction of new materials. During the course of tenure, four classes of solids were investigated to determine the hurdles presented from each system. Specifically, the investigation developed techniques for optimization of ink production, green-film deposition, and laser sintering parameters surrounding the Optomec AJP system (AJP). In the assessment, statistical experimental design, analysis and material characterization techniques have been utilized. Final recommendations disseminate current best practices for new ink and material development, along with factor analysis of input variables for phase and material properties, along with insights for future research of these systems. The first chapter provides a general introduction to the field of AP. The second chapter focuses specifically on Optomec aerosol-jet process (AJP) techniques, and expands the discussion to process parameters, information concerning the fabrication/characterization procedure followed for each system, and includes: a detailed description of the materials investigated. This is important because printing parameters, optimization, and approach may be divergent for optimization within each strain; and is meant as an aid to resolve some technical issues for future investigators. The third chapter is fully dedicated to the results concerning the fabrication and the characterization of amorphous boron powder to film. Chapter four discusses future research options, ideas and directions. Appendices are provided for any which wish to investigate the orthogonal arrays used, or the combinatorial effects resulting in the attributes of the material system final products.
Master of Science

APA, Harvard, Vancouver, ISO, and other styles

6

Martens, Robert. "Strategies for Adopting Additive Manufacturing Technology Into Business Models." ScholarWorks, 2018. https://scholarworks.waldenu.edu/dissertations/5572.

Full text

Abstract:

Additive manufacturing (AM), also called 3-dimensional printing (3DP), emerged as a disruptive technology affecting multiple organizations' business models and supply chains and endangering incumbents' financial health, or even rendering them obsolete. The world market for products created by AM has increased more than 25% year over year. Using Christensen's theory of disruptive innovation as a conceptual framework, the purpose of this multiple case study was to explore the successful strategies that 4 individual managers, 1 at each of 4 different light and high-tech manufacturing companies in the Netherlands, used to adopt AM technology into their business models. Participant firms originated from 3 provinces and included a value-added logistics service provider and 3 machine shops serving various industries, including the automotive and medical sectors. Data were collected through semistructured interviews, member checking, and analysis of company documents that provided information about the adoption of 3DP into business models. Using Yin's 5-step data analysis approach, data were compiled, disassembled, reassembled, interpreted, and concluded until 3 major themes emerged: identify business opportunities for AM technology, experiment with AM technology, and embed AM technology. Because of the design freedom the use of AM enables, in combination with its environmental efficiency, the implications for positive social change include possibilities for increasing local employment, improving the environment, and enhancing healthcare for the prosperity of local and global citizens by providing potential solutions that managers could use to deploy AM technology.

APA, Harvard, Vancouver, ISO, and other styles

7

Merriam, Ezekiel G. "Stiffness Reduction Strategies for Additively Manufactured Compliant Mechanisms." BYU ScholarsArchive, 2016. https://scholarsarchive.byu.edu/etd/5873.

Full text

Abstract:

This work develops and examines design strategies for reducing the stiffness of 3D-printed compliant mechanisms. The three aspects of a flexure that determine its stiffness are well known: material, boundary conditions, and geometry. In a highly constrained design space however, flexure stiffness may remain unacceptably high even while arriving at the limits of design constraints. In this work, changes to geometry and boundary conditions are examined that lead to drastically reduced stiffness behavior without changing flexure thickness, width, or length. Changes to geometry can result in very complex mechanisms. However, 3D printing enables almost arbitrarily complex geometries. This dissertation presents three design strategies for stiffness reduction: static balancing, lattice flexures, and compound joints. Static balancing refers to changes in the boundary conditions that result in a near-zero net change in potential energy storage over the useful deflection of a flexure. In this work, I present a method for static balancing that utilizes non-dimensional parameters to quickly synthesize a joint design with stiffness reduced by nearly 90%. This method is not only simple and straightforward, it is applicable to a wide range of flexure topologies. The only requirements on the joint to be balanced are that it must be approximated as a pin joint and torsion spring, and it must have a well-understood stiffness when subjected to a compressive load. Lattice flexures result from modifications to geometry that reduce cross-sectional area without changing width or thickness. However, the reduction in stiffness is greater than the reduction in cross sectional area. This can occur because the bending load is now carried by beams partially in torsion. Two lattice geometries are proposed and analyzed in detail using analytic and numeric techniques. It is shown that the off-axis stiffness behavior of lattice flexures can be better than that of conventional blade flexures while bending stiffness is reduced >60%. Compound joints are those that consist of arrays of flexures arranged co-axially. This arrangement provides increased range of motion, generally decreased stiffness, and improved stability. Additionally, a method is herein presented to reduce the parasitic center shift of a compound joint to nearly zero at a specified deflection. The penultimate chapter demonstrates how all three strategies can be used together, and includes new results to facilitate their combination.

APA, Harvard, Vancouver, ISO, and other styles

8

Panofré, Charlotte Anne. "Printing Protestant texts under Mary I : the Marian exiles' publishing strategies in their European context, 1553-58." Thesis, University of Cambridge, 2014. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.708245.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Saedtler, Marco [Verfasser], Lorenz [Gutachter] Meinel, and Ulrike [Gutachter] Holzgrabe. "Pharmaceutical formulation strategies for novel antibiotic substances utilizing salt formation and two- and three-dimensional printing techniques / Marco Saedtler ; Gutachter: Lorenz Meinel, Ulrike Holzgrabe." Würzburg : Universität Würzburg, 2021. http://d-nb.info/1225296013/34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Bergvall, Pernilla, and Jenny Ruona. "Reklambyråers strategier och attityder kring ansvarstaganden i miljöfrågor och hållbar utveckling : En djupintervjuundersökning." Thesis, Högskolan Dalarna, Grafisk teknologi, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:du-17233.

Full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "Printing strategies"

1

Birkenshaw, John W. Books on demand: Digital production strategies and cost models. Leatherhead, Surrey: Pira International, 2000.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

Lesley, Rushton, and Great Britain. Health and Safety Executive., eds. The development of risk reduction strategies for the prevention of dermatitis in the UK printing industry. Sudbury: HSE Books, 2003.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

TeX unbound: LaTeX & TeX strategies for fonts, graphics, & more. Oxford: Oxford University Press, 1998.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

O'Connor, Michael P. The MNM team building process for printers. Portland, Me: Old Stone Pub., 1991.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

STRATEGIES FOR PROBLEM SOLVING WORKBOOK: Revised Printing. Pearson, 2000.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

6

Jedlicka, Wendy. Sustainable Graphic Design: Tools, Systems and Strategies for Innovative Print Design. Wiley & Sons, Incorporated, John, 2010.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

7

Jedlicka, Wendy. Sustainable Graphic Design: Tools, Systems and Strategies for Innovative Print Design. Wiley & Sons, Incorporated, John, 2013.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

8

Jedlicka, Wendy. Sustainable Graphic Design: Tools, Systems and Strategies for Innovative Print Design. Wiley & Sons, Incorporated, John, 2010.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

9

Pochet, Philippe, Jonathan Zeitlin, and Lars Magnusson. Open Method of Co-Ordination in Action: The European Employment and Social Inclusion Strategies - Second Printing. Lang AG International Academic Publishers, Peter, 2012.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

10

Stanger, Howard R. A Moderate Employers’ Association in a “House Divided”. University of Illinois Press, 2017. http://dx.doi.org/10.5406/illinois/9780252040818.003.0008.

Full text

Abstract:

Howard Stanger brings a broad temporal perspective to Columbus employers in the printing industry and their varied strategies regarding activism. Here he makes the case for how employer activism did not always lead to an ability to counter unionism. Columbus printers made a collective decision to recognize unions for the first part of the twentieth century, and then later made a collective decision to initiate a campaign to counter unions. This counter-campaign benefitted from the long praxis of anti-unionism in other parts of the country, facilitated a vigorous belligerent drive against them based on strategies learned elsewhere, and in other industries.

APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Printing strategies"

1

Gebhardt, Andreas, Julia Kessler, and Laura Thurn. "Perspectives and Strategies of Additive Manufacturing." In 3D Printing, 137–65. München: Carl Hanser Verlag GmbH & Co. KG, 2018. http://dx.doi.org/10.3139/9781569907030.005.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Eyers, Daniel. "Flexibility Strategies for 3DP." In Managing 3D Printing, 77–96. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-23323-5_6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Micallef, Joe. "Design Strategies for 3D Printing." In Beginning Design for 3D Printing, 175–200. Berkeley, CA: Apress, 2015. http://dx.doi.org/10.1007/978-1-4842-0946-2_6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

N. Rosario, Timothy. "Concepts and Strategies to Adapt Inkjet Printing to Industrial Application Requirements." In Handbook of Industrial Inkjet Printing, 239–52. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, 2017. http://dx.doi.org/10.1002/9783527687169.ch13.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Lopez, Christopher D., Lukasz Witek, Roberto L. Flores, Andrea Torroni, Eduardo D. Rodriguez, Bruce N. Cronstein, and Paulo G. Coelho. "3D Printing and Adenosine Receptor Activation for Craniomaxillofacial Regeneration." In Regenerative Strategies for Maxillary and Mandibular Reconstruction, 255–67. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-319-93668-0_18.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Men, Xiangcheng, and Xueqing Zhang. "Case Study Analysis for Development Strategies of Construction 3D Printing." In Advances in Intelligent Systems and Computing, 439–50. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-20216-3_41.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Kállai, Zsolt, and Thorsten Schüppstuhl. "Robot-guided, feature-based 3D printing strategies for carbon fiber reinforced plastic." In Tagungsband des 4. Kongresses Montage Handhabung Industrieroboter, 178–86. Berlin, Heidelberg: Springer Berlin Heidelberg, 2019. http://dx.doi.org/10.1007/978-3-662-59317-2_18.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Maia, F. Raquel, Rui L. Reis, Vitor M. Correlo, and Joaquim M. Oliveira. "Microfluidic Devices and Three Dimensional-Printing Strategies for in vitro Models of Bone." In Advances in Experimental Medicine and Biology, 1–14. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-36588-2_1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Garzaniti, Nicola, Alessandro Golkar, and Clément Fortin. "Optimization of Multi-part 3D Printing Build Strategies for Lean Product and Process Development." In Product Lifecycle Management to Support Industry 4.0, 488–97. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-030-01614-2_45.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Al Dhaheri, Noura, Maria Polo Alvez, and Shin Ju-Young. "The Integration of Environmental Foot-Printing Strategies to the Capacitated Warehouse Location Problem with Risk Pooling." In EcoProduction, 481–97. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-07287-6_34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Printing strategies"

1

Poudel, Laxmi, Wenchao Zhou, and Zhenghui Sha. "Computational Design of Scheduling Strategies for Multi-Robot Cooperative 3D Printing." In ASME 2019 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/detc2019-97640.

Full text

Abstract:

Abstract Cooperative 3D printing (C3DP) is a novel approach to additive manufacturing, where multiple printhead-carrying mobile robots work together cooperatively to print a desired part. The core of C3DP is the chunk-based printing strategy in which the desired part is first split into smaller chunks, and then the chunks are assigned to individual printing robots. These robots will work on the chunks simultaneously and in a scheduled sequence until the entire part is complete. Though promising, C3DP lacks proper framework that enables automatic chunking and scheduling given the available number of robots. In this study, we develop a computational framework that can automatically generate print schedule for specified number of chunks. The framework contains 1) a random generator that creates random print schedule using adjacency matrix which represents directed dependency tree (DDT) structure of chunks; 2) a set of geometric constraints against which the randomly generated schedules will be checked for validation; and 3) a printing time evaluation metric for comparing the performance of all valid schedules. With the developed framework, we present a case study by printing a large rectangular plate which has dimensions beyond what traditional desktop printers can print. The study showcases that our computation framework can successfully generate a variety of scheduling strategies for collision-free C3DP without any human interventions.

APA, Harvard, Vancouver, ISO, and other styles

2

Mungaomklang, Apinya, Weera Chotihammaporn, and Suppawan Pankohlerng. "Strategies Adaptation of Medium Printing Business Entrepreneurs in The Digital Era." In The 13th National Conference on Technical Education andThe 8th International Conference on Technical Education. KMUTNB, Bangkok, Thailand, 2021. http://dx.doi.org/10.14416/c.fte.2021.07.047.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Pereira, Tanisha, Johan Potgieter, and John V. Kennedy. "Development of Quality Management Strategies for 3D Printing Testing Methods – a Review." In 2017 4th Asia-Pacific World Congress on Computer Science and Engineering (APWC on CSE). IEEE, 2017. http://dx.doi.org/10.1109/apwconcse.2017.00047.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Bisin, Riccardo, Alberto Verga, Daniele Bruschi, and Christian Paravan. "Strategies for Paraffin-based Fuels Reinforcement: 3D Printing and Blending with Polymers." In AIAA Propulsion and Energy 2021 Forum. Reston, Virginia: American Institute of Aeronautics and Astronautics, 2021. http://dx.doi.org/10.2514/6.2021-3502.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Han, Muyue, Jing Zhao, and Lin Li. "Emissions of Volatile Organic Compounds From 4D Printing and Associated Control Strategies Towards Workplace Safety." In ASME 2021 16th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/msec2021-63540.

Full text

Abstract:

Abstract The integration of additive manufacturing technologies with stimuli-responsive shape memory materials allows the dynamic self-adaptation of fabricated parts upon exposure to external stimulations. The additional dimension of time inspires the concept of four-dimensional printing technology. However, the emerging feedstock materials and the employment of external stimuli in 4D printing are also associated with new workplace hazards and occupational health concerns. Current evaluation studies on additive manufacturing are mainly focused on the safety and health effects that originated from the part production phase and cannot be directly applied in 4D printing processes. In this study, the emissions of volatile organic compounds from stereolithography-based 4D printing process with thermo-responsive materials are targeted as the potential safety concern. Real-time total volatile organic compound monitoring is conducted during various production phases to align the emission sources with critical operating activities, including both operator interventions and machine operations. Comparative experiments are performed to evaluate the effectiveness of proposed emission control strategies. In particular, alterations in operation procedures such as stirring speed in material mixing and post-printing stimulation method can contribute positively to air emission control during manual operations. In addition, the installation of activated carbon fiber filters inside the machine build chamber can lead to a significant reduction of air emissions during part fabrication with an overall total volatile organic compound concentration reduction of 58.91%.

APA, Harvard, Vancouver, ISO, and other styles

6

Nyman, Henrik J., and Peter Sarlin. "From Bits to Atoms: 3D Printing in the Context of Supply Chain Strategies." In 2014 47th Hawaii International Conference on System Sciences (HICSS). IEEE, 2014. http://dx.doi.org/10.1109/hicss.2014.518.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Rondinoni, Carlo, Felipe Wilker Grillo, Caio Marconato Matias, Marcelo Volpon Santos, Pedro Yoshito Noritomi, Jorge Vicente Lopes da Silva, Antonio Adilton Oliveira Carneiro, Antonio Carlos Dos Santos, and Helio Rubens Machado. "Use of 3D Printing in Surgical Planning: Strategies for Risk Analysis and User Involvement." In 2015 IEEE 28th International Symposium on Computer-Based Medical Systems (CBMS). IEEE, 2015. http://dx.doi.org/10.1109/cbms.2015.15.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Díaz, Andrés, Jesús Manuel Alegre, and Isidoro Iván Cuesta. "STRATEGIES FOR ADDITIVE MANUFACTURING LEARNING THROUGH PROJECTS BASED ON DESKTOP 3D PRINTING IN HIGHER EDUCATION." In 13th International Conference on Education and New Learning Technologies. IATED, 2021. http://dx.doi.org/10.21125/edulearn.2021.2221.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Seshadri, Aravind, and Prabhakar R. Pagilla. "Design of Delay Independent State Feedback Control for Roll-to-Roll Printing Applications." In ASME 2014 Dynamic Systems and Control Conference. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/dscc2014-6333.

Full text

Abstract:

Control of print quality (registration) in roll-to-roll (R2R) printing is challenging because of the presence of transport delays involved in the printing process. In this work we present a delay-independent state feedback control design to stabilize a R2R printing press by considering all the significant dynamics involved in the printing process. State feedback control design using past state measurements (controllers with memory) are discussed first. Since controllers with memory are less desirable in industrial applications, we investigate and discuss the feasibility of designing a simple, memoryless, delay-independent state feedback controller for printing applications. The feasibility is shown by the use of a control design procedure that exploits the structure information in the system matrix to find a stabilizing controller. The design procedure is also extended to other common industrial R2R control strategies, such as decentralized control and state feedback with integral action for R2R printing applications.

APA, Harvard, Vancouver, ISO, and other styles

10

Pereira, Tanisha, Johan Potgieter, and John V. Kennedy. "A fundamental study of 3D printing testing methods for the development of new quality management strategies." In 2017 24th International Conference on Mechatronics and Machine Vision in Practice (M2VIP). IEEE, 2017. http://dx.doi.org/10.1109/m2vip.2017.8211513.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!