Log in

Relevant bibliographies by topics / Press treatment / Journal articles

To see the other types of publications on this topic, follow the link: Press treatment.

Journal articles on the topic 'Press treatment'

Author: Grafiati

Published: 4 June 2021

Last updated: 10 March 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Press treatment.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Celikoz, Bahattin, Bruce M. Achauer, and Victoria M. VanderKam. "Hot-Press Hand Burn Treatment." Journal of Burn Care & Rehabilitation 19, no. 2 (March 1998): 128–30. http://dx.doi.org/10.1097/00004630-199803000-00008.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

CHOI, KYE-KWANG, and YONG-SHIN LEE. "EFFECTS OF HEAT TREATMENTS ON THE ON-LINE SERVICE LIFE OF A PRESS DIE MANUFACTURED BY W-EDM." International Journal of Modern Physics B 22, no. 31n32 (December 30, 2008): 5631–36. http://dx.doi.org/10.1142/s0217979208050929.

Full text

Abstract:

Effects of heat treatments on the on-line service life of a press die manufactured by W-EDM are studied. In this work, four manufacturing processes for a press die are considered: (1) milling and then grinding, (2) wire-cut electric discharge machining (W-EDM), (3) low temperature heat treatment after W-EDM, and (4) high temperature heat treatment after W-EDM. On-line punching experiments for an automobile part of BL646-chain are performed. The amount of wear of the die and punch, roll-over and burnish depth in the punched chain are measured every 1,000 strokes. Overall productivities are carefully compared. Finally, it is concluded that heat treatment after W-EDM for a press die can enhance its on-line service life. Especially, high temperature heat treatment after W-EDM is very attractive as a fast and cheap manufacturing method for a press die.

APA, Harvard, Vancouver, ISO, and other styles

3

Skinner, Martha. "Amyloidosis: Diagnosis and Treatment, Humana Press." European Journal of Haematology 86, no. 4 (March 18, 2011): 360. http://dx.doi.org/10.1111/j.1600-0609.2011.01581.x.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

López González, Lisbet Mailín, Ileana Pereda Reyes, Julio Pedraza Gárciga, Ernesto L. Barrera, and Osvaldo Romero Romero. "Effects of press- mud pre-treatment on the feasibility of biogas production." Revista Facultad de Ingeniería Universidad de Antioquia, no. 92 (May 23, 2019): 51–59. http://dx.doi.org/10.17533/udea.redin.20190520.

Full text

Abstract:

In this study, an energetic, economic and environmental feasibility for the anaerobic digestion (AD) of press mud previously pretreated with liquid hot water (LHW) or thermo-alkaline (TA) methods were assessed. A typical Cuban sugar mill was selected as ¨Case Study¨. The sugar mill has a potential capacity to process 4600 t d-1of sugar cane and operates 130 days per year. The biogas produced can be used to feed an internal combustion engine to produce electricity and heat. It was assumed that the electricity will be sold to the national electric grid and the heat recovered from the exhaust gases will be used as energy source to supply the thermal demand for press mud pre-treatments. The thermal requirements for pre-treatments (9.4 and 12.1 MWh d-1) were energy sufficient by recovering the heat from the engine exhaust. For the alternatives considered, an improvement of the environmental profile with respect to the reference scenario was obtained. The profitability of methane production also increased for alternatives considering pre-treatment. In general, the economical, energetic and environmental assessment showed the best indicators for the AD of press mud using LHW pre-treatment.

APA, Harvard, Vancouver, ISO, and other styles

5

Woolf, Kathleen, Wendy K. Bidwell, and Amanda G. Carlson. "The Effect of Caffeine as an Ergogenic Aid in Anaerobic Exercise." International Journal of Sport Nutrition and Exercise Metabolism 18, no. 4 (August 2008): 412–29. http://dx.doi.org/10.1123/ijsnem.18.4.412.

Full text

Abstract:

The study examined caffeine (5 mg/kg body weight) vs. placebo during anaerobic exercise. Eighteen male athletes (24.1 ± 5.8 yr; BMI 26.4 ± 2.2 kg/m2) completed a leg press, chest press, and Wingate test. During the caffeine trial, more total weight was lifted with the chest press, and a greater peak power was obtained during the Wingate test. No differences were observed between treatments for the leg press and average power, minimum power, and power drop (Wingate test). There was a significant treatment main effect found for postexercise glucose and insulin concentrations; higher concentrations were found in the caffeine trial. A significant interaction effect (treatment and time) was found for cortisol and glucose concentrations; both increased with caffeine and decreased with placebo. Postexercise systolic blood pressure was significantly higher during the caffeine trial. No differences were found between treatments for serum free-fatty-acid concentrations, plasma lactate concentrations, serum cortisol concentrations, heart rate, and rating of perceived exertion. Thus, a moderate dose of caffeine resulted in more total weight lifted for the chest press and a greater peak power attained during the Wingate test in competitive athletes.

APA, Harvard, Vancouver, ISO, and other styles

6

Diorio, Charles N. "Hepatitis C and Me: Treatment and Cure." Journal of Prisoners on Prisons 27, no. 1 (July 11, 2018): 13–16. http://dx.doi.org/10.18192/jpp.v27i1.3330.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Waters, Judith A. "A. R. Roberts (Ed.). Crisis Intervention Handbook: Assessment, Treatment, and Research (2nd ed.). New York: Oxford University Press, 2000. 584 pp. ISBN 0‐19‐513365‐X, $29.95." Brief Treatment and Crisis Intervention 2, no. 1 (March 1, 2002): 105–6. http://dx.doi.org/10.1093/brief-treatment/2.1.105.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Peynaud, Caroline. "Fukushima and its treatment in the press." Progress in Industrial Ecology, An International Journal 10, no. 2/3 (2016): 209. http://dx.doi.org/10.1504/pie.2016.082148.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Peynaud, Caroline. "Fukushima and its treatment in the press." Progress in Industrial Ecology, An International Journal 10, no. 2/3 (2016): 209. http://dx.doi.org/10.1504/pie.2016.10003066.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Effenberger, Johannes, Lydia Jahn, and Volker Kuehn. "Co-digestion of press liquids of source-sorted municipal organic waste in anaerobic sludge treatment of municipal wastewater treatment plants." Water Science and Technology 73, no. 12 (April 15, 2016): 3080–86. http://dx.doi.org/10.2166/wst.2016.143.

Full text

Abstract:

Abstract This paper describes a semi-continuous laboratory-scale investigation of a potential co-substrate for mesophilic anaerobic sludge digestion in a municipal wastewater treatment plant. A feed liquid produced from source-sorted municipal organic waste by pretreatment with a screw press was subjected to the investigation. Quantities produced in press trials as well as the composition of the feed liquid are presented. Mass balances for N, P and chemical oxygen demand are given in order to verify the methane production of the feed liquid in co-digestion with sewage sludge at mesophilic conditions. Hydraulic retention time of the reactors were 14.7 to 16 d and organic loading rates were 1.5 to 2.7 kg volatile solids (VS) per cubic metre per day. The pretreatment by screw press is compared to the production of feed liquids with pulper-based pretreatment processes. While the addition of the feed liquid increased methane production by about 345 ml CH4/g VSin, total solids of the feed liquid were reduced to about 63%. With respect to co-digestion at municipal wastewater treatment plants, several risks associated with the investigated feed liquid are outlined.

APA, Harvard, Vancouver, ISO, and other styles

11

Aiello, Gilda, Yuchen Li, Ruoxian Xu, Giovanna Boschin, Grazina Juodeikiene, and Anna Arnoldi. "Composition of the Protein Ingredients from Insoluble Oat Byproducts Treated with Food-Grade Enzymes, Such as Amylase, Cellulose/Xylanase, and Protease." Foods 10, no. 11 (November 4, 2021): 2695. http://dx.doi.org/10.3390/foods10112695.

Full text

Abstract:

The manufacture of plant-based drinks has the drawback of a huge production of underexploited press cakes. In particular, the oat press cake is mainly used in feed formulation, whereas added-value applications in human nutrition are scarce. Considering that enzymatic treatments may be useful to improve the nutritional quality of these insoluble byproducts, this study aimed to evaluate whether the treatment with some food-grade enzymes, such as amylase, cellulase/xylanase, protease, and their combination, may be useful to achieve this goal. Proteomic and peptidomic studies showed that the enzymatic treatments improved the protein extraction yields and induced a release of low molecular weight (LMW) peptides that were demonstrated to provide a useful antioxidant activity. In the treated oat press cake proteins, the concentration of the bound phenolic compounds was decreased, with the exception of caffeic acid, which was increased, and avenanthramides, which remained unchanged. Finally, the enzymatic treatment decreased the concentration of phytic acid. All these results indicate that the enzymatic treatments may be useful to ameliorate the nutritional profile of these protein ingredients, before their inclusion in different food products.

APA, Harvard, Vancouver, ISO, and other styles

12

Gründer, Gerhard. "Psychedelics: A New Treatment Paradigm in Psychiatry?" Pharmacopsychiatry 54, no. 04 (June 24, 2021): 149–50. http://dx.doi.org/10.1055/a-1520-5020.

Full text

Abstract:

The renaissance of psychedelics has accelerated further over the past year. At least that’s true if you follow the public press. The New York Times recently titled “The Psychedelic Revolution Is Coming. Psychiatry May Never Be the Same.” on its front page 1.

APA, Harvard, Vancouver, ISO, and other styles

13

Budiyanto, G. "The effect of combination of sugarcane pressmud compost and potassium fertilizer on vegetative growth of corn in coastal sandy soil." Food Research 5, no. 3 (June 13, 2021): 289–96. http://dx.doi.org/10.26656/fr.2017.5(3).630.

Full text

Abstract:

Generally, coastal sandy soil has low water content and potassium nutrients. One way to fix this is by adding organic matter and potassium fertilizers. Sugarcane press mud compost as organic material acts as a slow-release fertilizer, it has an effect long enough to support plant growth. A pot experiment was carried out to test the probability of combining sugarcane press mud compost and potassium fertilizer to improve the vegetative growth of corn plants in coastal sandy soils. This research was arranged in a factorial completely randomized design. The first factor is the dosages of sugarcane press mud compost (0, 20, 25, 30, 35 tons per hectare). The second factor is the dosages of potassium fertilizer (0, 60, 90, and 120 kg K2O per hectare). After applying basal fertilizer (120 kg N per hectare and 90 kg P2O5 per hectare) and the treatment factor has been applied, the corn seed is planted and grown until vegetative growth or at flowering. The results showed that sugarcane press mud compost and potassium fertilizer interacted with the effect of shoots fresh and dry weight, fresh weight, and root dry weight. The combination treatment of 25 tons of sugarcane press mud compost per hectare and 90 kg K2O per hectare (B2P2) resulted in the highest fresh weight and dry weight of shoots. Meanwhile, the combination of 0 tons of sugarcane press mud compost per hectare and 120 kg K2O per hectare (B0P3) produced the highest fresh weight and plant roots' dry weight. The two treatments did not interact in influencing plant height and potassium content in the corn leaf tissue. Both the sugarcane press mud treatment (20, 25, 30 and 35 tons per hectare), and the application of potassium fertilizer (60 and 90 kg K2O per hectare) significantly increased plant height growth. The highest dosage of sugarcane press mud compost (35 tons per hectare) and potassium fertilizer (120 kg K2O per hectare) produces potassium content in plant leaf tissue

APA, Harvard, Vancouver, ISO, and other styles

14

He, Yuan, Beilei He, Zhi Ji, Ruixue Zhang, Zhuoya Quan, Guijun Xie, and Xiaoli Pu. "Modified Trabeculectomy versus Glaucoma Drainage Implant Surgery: A Retrospective Comparative Study for Refractory Glaucoma Treatment." Oxidative Medicine and Cellular Longevity 2022 (May 23, 2022): 1–15. http://dx.doi.org/10.1155/2022/3050007.

Full text

Abstract:

Purpose. To observe and compare the efficacy of modified trabeculectomy (TE), Ahmed drainage valve implantation (AGV), and EX-PRESS glaucoma shunt for refractory glaucoma (RG). Methods. The study population of this retrospective study comprised 73 patients (76 eyes) who were suffering from RG and treated with modified TE, AGV, and EX-PRESS glaucoma shunt in our hospital from October 2012 to October 2020. The number of cases who underwent modified TE, AVG, and EX-PRESS glaucoma shunt was 36 (38 eyes). 19 (20 eyes), and 18 patients (18 eyes), respectively. The intraocular pressure (IOP), best-corrected visual acuity (BCVA), postoperative antiglaucoma medications, filter bubble morphology, anterior chamber depth (ACD), successful rate, and postoperative complications were recorded and statistically analyzed preoperative and 1 d, 1 w, 1 mon, 3 mon, 6 mon, and the end follow-up after operation. Results. The BCVA differed insignificantly among the three cohorts before and 6 months after surgery. Compared to preoperative BCVA, the postoperative BCVA of the three groups had no statistical significance. An obvious reduction in IOP was observed in all the three group after operation ( P < 0.05 ). An obvious decrease in antiglaucoma medications was observed after surgery in all the three groups ( P < 0.05 ). The AGV group showed deeper ACD postoperatively, while no marked difference was found in postoperative ACD in the other two groups. The total success rates in modified TE and AGV groups were slightly higher than those in the EX-PRESS group. The three groups differed insignificantly in filter bubble morphology after operation. Conclusion. Modified TE, AGV, and EX-PRESS glaucoma shunt showed equivalent efficacy for RG, which could validly reduce IOP and postoperative antiglaucoma medications. However, the success rates of modified TE and AGV were slightly higher than those of EX-PRESS glaucoma shunt in the last follow-up, and their complications were slightly less than those of the EX-PRESS glaucoma shunt.

APA, Harvard, Vancouver, ISO, and other styles

15

Chiu, L. C., Y. H. Jiang, W. W. Shen, C. Y. Yang, and Q. H. Yang. "Kinesic Press—Finger Compress Method for TMJ Treatment." CRANIO® 5, no. 3 (July 1987): 260–68. http://dx.doi.org/10.1080/08869634.1987.11678199.

Full text

APA, Harvard, Vancouver, ISO, and other styles

16

Xu, Weilin, Weigang Cui, Wenbin Li, and Weiqi Guo. "Two‐step durable press treatment of cotton fabric." Coloration Technology 117, no. 6 (November 2001): 352–55. http://dx.doi.org/10.1111/j.1478-4408.2001.tb00089.x.

Full text

APA, Harvard, Vancouver, ISO, and other styles

17

Moscrop, A. "Doctors press for humane treatment of asylum seekers." BMJ 323, no. 7319 (October 27, 2001): 952. http://dx.doi.org/10.1136/bmj.323.7319.952b.

Full text

APA, Harvard, Vancouver, ISO, and other styles

18

Luo, Tian-tong, Lise Heier, Zaki Ahmad Khan, Faraz Hasan, Trond Reitan, Abdool S. Yasseen, Zi-xuan Xie, Jian-long Zhu, and Gabriel Yedid. "Examining Community Stability in the Face of Mass Extinction in Communities of Digital Organisms." Artificial Life 24, no. 4 (March 2019): 250–76. http://dx.doi.org/10.1162/artl_a_00272.

Full text

Abstract:

Digital evolution is a computer-based instantiation of Darwinian evolution in which short self-replicating computer programs compete, mutate, and evolve. It is an excellent platform for addressing topics in long-term evolution and paleobiology, such as mass extinction and recovery, with experimental evolutionary approaches. We evolved model communities with ecological interdependence among community members, which were subjected to two principal types of mass extinction: a pulse extinction that killed randomly, and a selective press extinction involving an alteration of the abiotic environment to which the communities had to adapt. These treatments were applied at two different strengths, along with unperturbed control experiments. We examined how stability in the digital communities was affected from the perspectives of division of labor, relative shift in rank abundance, and genealogical connectedness of the community's component ecotypes. Mass extinction that was due to a Strong Press treatment was most effective in producing reshaped communities that differed from the pre-treatment ones in all of the measured perspectives; weaker versions of the treatments did not generally produce significant departures from a Control treatment; and results for the Strong Pulse treatment generally fell between those extremes. The Strong Pulse treatment differed from others in that it produced a slight but detectable shift towards more generalized communities. Compared to Press treatments, Pulse treatments also showed a greater contribution from re-evolved ecological doppelgangers rather than new ecotypes. However, relatively few Control communities showed stability in any of these metrics over the whole course of the experiment, and most did not represent stable states (by some measure of stability) that were disrupted by the extinction treatments. Our results have interesting, broad qualitative parallels with findings from the paleontological record, and show the potential of digital evolution studies to illuminate many aspects of mass extinction and recovery by addressing them in a truly experimental manner.

APA, Harvard, Vancouver, ISO, and other styles

19

Khudyakov, A. Yu, S. V. Vashchenko, K. V. Bayul, and Yu S. Semenov. "The kaoline raw materials compacting for the lump fireclay production." NOVYE OGNEUPORY (NEW REFRACTORIES), no. 8 (December 27, 2018): 14–19. http://dx.doi.org/10.17073/1683-4518-2018-8-14-19.

Full text

Abstract:

The eﬀectiveness of the kaoline raw materials briquetting in the roller press was investigated in the capacity of the dust creation prevention while the clay burning. It was found out that the roller press with the claw-grooved confguration of molding components in comparison with the extruding-vacuum press allowed to obtain the higher quality briquettes which had the higher resistance against the fracture under the heat treatment. The most favourable clay moisture to use in the roller press was defned to be 21 %. It was established that production of the briquettes having just this moisture could provide both the minimal briquettes' destruction under the heat treatment and the energy consumption for the drying material before the compacting as well as it could increase the intact briquettes outcome of the press while the wet briquettes having higher strength.Ill.2. Ref. 9. Tab. 1.

APA, Harvard, Vancouver, ISO, and other styles

20

Congress, Elaine P. "Book Review. Albert R. Roberts and Kenneth R. Yeager (Eds). Evidence-Based Practice Manual: Research and Outcome Measures in Health and Human Services. New York: Oxford University Press, 2004. 1092 pp. ISBN 0-19-516500-4, $89.50 (hardback)." Brief Treatment and Crisis Intervention 4, no. 2 (2004): 195–96. http://dx.doi.org/10.1093/brief-treatment/mhh016.

Full text

APA, Harvard, Vancouver, ISO, and other styles

21

Kokiz AL-SARRAJ, Shukria. "THE PRESS TREATMENT OF THE VISIT OF "POPE FRANCIS" AND ITS REPERCUSSIONS ON COMMUNITY PEACE IN IRAQ... A SURVEY STUDY..." RIMAK International Journal of Humanities and Social Sciences 4, no. 6 (November 1, 2022): 389–414. http://dx.doi.org/10.47832/2717-8293.20.24.

Full text

Abstract:

The importance of the research from a practical point of view lies in the fact that it presents a set of statistics and data that give a clear picture of how the Iraqi newspapers (the subject of the study) deal with the visit of "Pope Francis" to Iraq ، and what are the most prominent indicators and manifestations of that visit in promoting societal peace among the Iraqi public. From a scientific point of view، the research provides another scientific addition to the media library، especially with regard to journalistic treatments and methods of framing the Arab international press for the subject of the visit، which could be a starting point for other researchers to complete qualitative research in this field. The research problem is how the Iraqi newspapers (the subject of the study) deal with Pope Francis' visit to Iraq، identifying the questions it raised to the reader، and the extent of the media material's contribution to the newspaper and its analyzes، to reveal and highlight the issues of interest. A main question for the research problem can be formulated as follows: How did the Iraqi press handle Pope Francis' visit to Iraq? Branching from this main question are sub-questions that can be identified as follows: 1- What are the most important journalistic arts that dealt with the visit of "Pope Francis" to Iraq? 2- What kind of information sources did the Iraqi press use in dealing with Pope Francis' visit to Iraq? 3- What is the location of publishing the topics of Pope Francis' visit to Iraq in the two newspapers Al-Ainah? 4- What are the most prominent internal and external actors that the Iraqi press dealt with while addressing the visit of "Pope Francis" to Iraq? 5- What are the directions of content presentation of the press treatment of Pope Francis' visit to Iraq? 6- What are the most prominent types of journalistic treatments used in Pope Francis' visit to Iraq? 7- What is the impact of Pope Francis' visit on societal peace in Iraq? 8- Did the visit have positive or negative repercussions on societal peace in Iraq? 9- Was the media of its various types effective in handling and covering the visit? 10- Which active forces were the most influential during the visit? 11- What are the most influential dimensions of this visit in the societal peace in Iraq? 12- How important is the role of Iraqi women in this visit? Within the framework of the methodology، methods and research tools available to it، the researcher seeks to achieve a number of scientific objectives related to the subject of the research، including the following at the level of the analytical study: 1. Getting to know how the Iraqi press handled the visit of "Pope Francis" to Iraq. 2. Knowing the most important journalistic arts that dealt with the visit of "Pope Francis" to Iraq 3. To identify the type of information sources adopted by the Iraqi press for the visit of "Pope Francis" to Iraq. 4. Knowing the location of publishing the topics of Pope Francis’ visit to Iraq in Al-Ainah newspapers. 5. Determining the most prominent internal and external actors dealt with by the Iraqi press for the visit of "Pope Francis" to Iraq. 6. Statement of the direction of the press treatment of Pope Francis' visit to Iraq. 7. To identify the most prominent types of press treatments that were used in Pope Francis' visit to Iraq. As for the research objectives in the field study، they are as follows: 1- Knowing the impact of Pope Francis' visit on societal peace in Iraq. 2- Find out what the visit has achieved of positive or negative repercussions on societal peace in Iraq? 3- Recognizing the effectiveness of the various types of media in handling and covering the visit. 4- Exposing the most influential actors during the visit. 5- Knowing the most influential dimensions of this visit in the societal peace in Iraq. 6- Understand the importance of the role of Iraqi women in this visit. The research community is represented in the following areas: 1- The temporal domain: The researcher determined the temporal domain of her research by specifying the visit of "Pope Francis" to Iraq، as the time period for analyzing the content of the Iraqi press on the subject of the research was determined، as well as the units or categories of analysis related to media treatment. 2- Spatial domain: the researcher chose to analyze the content of the Iraqi press (Al-Sabah / Al-Zaman). 3- The human sphere: the human sphere is represented by a sample of the Iraqi elite، represented by a sample of Baghdad University professors. Among the most important results of the research are the following: 1. The category of spreading a culture of societal peace has preceded the main (7) categories of journalistic treatment of Pope Francis' visit to Iraq. 2. The art of press news in the two newspapers of the sample got the first rank among (6) journalistic arts used for the treatment under study. 3. The highest frequencies in the press sources used in the press treatment (the press representative) were collected in both newspapers. 4. The positive trend prevailed over the presentation of the topics of Pope Francis' visit to Iraq. 5. The internal pages have progressed from the first and last pages in publishing the topics of the visit. 6. The Iraqi government represented the internal and external actors in handling the two newspapers for the visit. 7. The explanatory treatment ranked first in the two newspapers of the sample in its journalistic treatment of the visit. 8. Pope Francis' visit had a great impact on societal peace in Iraq. 9. The visit achieved its positive repercussions by (89%) on the Iraqi society. 10. The sample confirmed that the timing of the visit was very appropriate for the stage in Iraq. 11. The sample confirmed that the Iraqi media of all kinds and trends were active during the visit. 12. The name of the pilgrimage to Ur was presented above the rest of the names given to Pope Francis' visit to Iraq. 13. The respondents indicated that the religious authority in Najaf Al-Ashraf was one of the effective forces for the success of the visit. 14. The sample confirmed that women have priority and an active role in Pope Francis' conversations during the visit. Keywords: Journalism.. Treatment.. Societal Peace

APA, Harvard, Vancouver, ISO, and other styles

22

Schafraad, Pytrik, and Ward Van Zoonen. "Reconsidering churnalism: How news factors in corporate press releases influence how journalists treat these press releases after initial selection." Communications 45, s1 (November 18, 2020): 718–43. http://dx.doi.org/10.1515/commun-2019-2075.

Full text

Abstract:

AbstractThis study examines how news factors in press releases influence journalists’ decisions and the journalistic treatment of press release information after its initial selection for the news agenda: These journalists can transform press releases into a news story, which involves little journalistic capital investment, or use these releases for a unique news production, which requires significant journalistic capital investment. The data elicited from the content analysis show that the more profound the presence of certain news factors in press releases, the higher the chance that journalists will choose to invest their journalistic capital in these press releases. This result means that journalists will only invest journalistic capital in press releases that contain specific news factors.

APA, Harvard, Vancouver, ISO, and other styles

23

Ward, Roscoe F., and Billy Huston. "Wastewater Sludge Dewatering for Champion-Hamilton Treatment Facility." Water Science and Technology 40, no. 11-12 (December 1, 1999): 155–62. http://dx.doi.org/10.2166/wst.1999.0707.

Full text

Abstract:

Paper mills are under constant pressure to increase their profits and to reduce their wastewater treatment costs. Champion International Mill in Hamilton, Ohio, is not an exception. The mill produces 340 to 365 tons/day of coated and uncoated printing and writing papers. Prior to 1996, Champion used less than 60 tons/day of secondary fiber. The usage of secondary fiber has increased to 100 to 114 tons/day. In 1996 improvements were made in the mill to reduce fiber losses. At that time the corporation also changed suppliers of polymers. As a result of these changes, the wastewater treatment plant saw its sludge disposal costs increasing. The solids from their screw presses decreased from 55% to 48%. This paper reports the series of options that were examined to improve the dewatering and to lower disposal costs. Included are changes in polymers and polymer applications, changes in the chemical sludge mixing, improved press orifice cleaning, and screw press motor load control systems. The effects of these changes have resulted in improved dewatering and the potential for even higher solids in the sludge cake. The economics of the sludge dewatering system are reviewed.

APA, Harvard, Vancouver, ISO, and other styles

24

Döllerer, J., and P. A. Wilderer. "High Pressure Treatment of Organic Wastes." Water Science and Technology 28, no. 1 (July 1, 1993): 243–48. http://dx.doi.org/10.2166/wst.1993.0055.

Full text

Abstract:

High pressure treatment of organic materials was introduced several years ago by Japanese researchers as a means to preserve food. Application potentials are also envisaged in the field of waste treatment. Hygienization effects, for instance, are achieved, when microbially contaminated samples are placed into an isostatic press and exposed, at room temperature, to a pressure of 4,000 bars and above. Deformation of the biopolymers under those extreme pressure conditions leads to effects such as coagulation, denaturation of proteins, crystallisation and/or gelatinization (Heremans 1992). As a result the microorganisms lose viability within a few minutes.

APA, Harvard, Vancouver, ISO, and other styles

25

Bachmann, Simon, Cornelia Betschart, Julia Gerber, Karin Fürer, Mónica Mennet, Matthias Hamburger, Olivier Potterat, Ursula von Mandach, and Ana Simões-Wüst. "Potential of Bryophyllum pinnatum as a Detrusor Relaxant: An in Vitro Exploratory Study." Planta Medica 83, no. 16 (April 24, 2017): 1274–80. http://dx.doi.org/10.1055/s-0043-109097.

Full text

Abstract:

AbstractAn earlier prospective, randomised, placebo-controlled clinical trial had suggested that Bryophyllum pinnatum might have potential in the treatment of overactive bladder. Here we investigated the effects of B. pinnatum leaf press juice, fractions enriched in flavonoids and bufadienolides, and a flavonoid aglycon mixture and individual aglycons on detrusor contractility as a major target in overactive bladder treatment. The strength of the detrusor contractions was investigated using porcine muscle strips stimulated with KCl. B. pinnatum leaf press juice increased the contraction force of muscle strips. Treatment with the flavonoid-enriched fraction had almost no effect on contractility, while the bufadienolide-enriched fraction and flavonoid aglycons led to a concentration-dependent lowering of the contraction force. The data indicate that several components of B. pinnatum leaf press juice may contribute to the inhibitory effect on detrusor contractility, which in turn provides support to overactive bladder treatment with B. pinnatum.

APA, Harvard, Vancouver, ISO, and other styles

26

Yasmeen, Sumaira, Ashraf Iqbal, and Noshaba Nargis. "Editorial Treatment of Arab-Israeli Relations in American Press." Global Regional Review VI, no. I (March 30, 2021): 296–306. http://dx.doi.org/10.31703/grr.2021(vi-i).32.

Full text

Abstract:

This descriptive research examined how attention paid to Arab- Israel relations news editorials in newspapers. To explore the state of Arab- Israel relations, editorials in newspapers content analysis has been conducted. Two theories were utilized: agenda-setting theory and framing theory in mixed-method research. By selecting three newspapers, 320 editorials related to Arab- Israel relations were obtained in six months from 15 Nov, 2020 to 15 May 2021 through purpose sampling. The findings of the study concluded that mostly editorials discussed the topics of Arab- Israel conflict/crisis and Israel's recent recognition by Arab states, which are highly reported in this time period. Most editorials were in positive/favorable, negative/unfavorable, and neutral directions, respectively. Two-thirds of the editorials discussed the nonscientific evidence. USA press (The Washington Post) have more tendency to present and focus the Arab-Israel relations-related editorials in positive/favorable direction content as compared to other newspapers.

APA, Harvard, Vancouver, ISO, and other styles

27

FURUYA, Eiji, Takane NAYUKI, Mayumi YAKAME, Hiroko FURUUMI, Ryuzo SHINOHARA, Ryuiti NIMURA, Yasuhisa KANAKO, and Ayumi SAKAMOTO. "Effect of Press Tack Needle Treatment on Shoulder Stiffness." Zen Nihon Shinkyu Gakkai zasshi (Journal of the Japan Society of Acupuncture and Moxibustion) 52, no. 5 (2002): 553–61. http://dx.doi.org/10.3777/jjsam.52.553.

Full text

APA, Harvard, Vancouver, ISO, and other styles

28

Liskow, Barry. "The American Psychiatric Press Textbook of Substance Abuse Treatment." Psychiatric Services 46, no. 3 (March 1995): 295. http://dx.doi.org/10.1176/ps.46.3.295.

Full text

APA, Harvard, Vancouver, ISO, and other styles

29

Er, Nuray, Hakan Yusuf Tuncer, Çiğdem Karaca, and Seçil Çopuroğlu. "Treatment of Oroantral Fistulas Using Bony Press-Fit Technique." Journal of Oral and Maxillofacial Surgery 71, no. 4 (April 2013): 659–66. http://dx.doi.org/10.1016/j.joms.2012.12.010.

Full text

APA, Harvard, Vancouver, ISO, and other styles

30

Wang, Tao, Lan Huang, Wenhao Chen, Yi Tan, Lei Chen, and Dayang Wu. "Thermal bonded cocoon laminates via simple hot-press treatment." Journal of Materials Science 53, no. 22 (July 25, 2018): 15726–34. http://dx.doi.org/10.1007/s10853-018-2717-2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

31

FANN, WILLIAM EDWIN. "The American Psychiatric Press Textbook of Substance Abuse Treatment." American Journal of Psychiatry 152, no. 6 (June 1995): 944–45. http://dx.doi.org/10.1176/ajp.152.6.944.

Full text

APA, Harvard, Vancouver, ISO, and other styles

32

Hirsch, Robert. "The American psychiatric press textbook of substance abuse treatment." Journal of Substance Abuse Treatment 12, no. 2 (March 1995): 144–45. http://dx.doi.org/10.1016/0740-5472(95)90055-1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

33

Yates, William R. "The American Psychiatric Press Textbook of Substance Abuse Treatment." JAMA: The Journal of the American Medical Association 273, no. 22 (June 14, 1995): 1797. http://dx.doi.org/10.1001/jama.1995.03520460081044.

Full text

APA, Harvard, Vancouver, ISO, and other styles

34

Monotti, Isobel C., Christopher A. Preston, and Scott W. Kidd. "Treatment Outcomes for Periprosthetic Femoral Fractures in Cementless Press-Fit Total Hip Replacement." Veterinary and Comparative Orthopaedics and Traumatology 33, no. 05 (April 30, 2020): 370–76. http://dx.doi.org/10.1055/s-0040-1709486.

Full text

Abstract:

Abstract Objective The aim of this study was to report outcomes in dogs with periprosthetic femoral fractures associated with a press-fit cementless femoral total hip replacement implant. Materials and Methods Electronic medical records and digital radiographs were used to identify dogs with periprosthetic femoral fractures associated with press-fit cementless total hip replacement. Data collected included signalment, weight, time of fracture, cause of fracture, presence of intra-operative fissure, fracture type, repair technique, and clinical and radiographic outcomes. Long-term patient outcome was assessed by communication with owners or referring veterinarians. Results Twenty-eight dogs with femoral fracture repair associated with cementless press-fit total hip replacement were identified. Eight of the fractures occurred intraoperatively and 20 occurred at a median of 2 days postoperatively. An oblique or spiral configuration was noted in 19 cases and 15 occurred at the distal end of the femoral stem (type B), with thirteen type B1, one type B2 and one type B3 fractures. Fractures were repaired with non-locking (18/28) or locking-plate fixation (10/28). Cerclage wire was applied around the plate and proximal bone segment in 17/28 dogs. Major complications occurred in 7/28 cases (five deep infection, two mechanical failures). Bone healing was noted in 21/23 cases, for which follow-up radiographic interpretation was available. Return to function was complete in 17 cases, acceptable in 8 cases and unacceptable in 3 cases. Conclusions While cementless total hip replacement periprosthetic femoral fractures can be successfully repaired with lateral plate fixation, the risk of infection appears to be high.

APA, Harvard, Vancouver, ISO, and other styles

35

Heo, Young Moo, Jong Deok Kim, and Yong Jun Jeon. "Study on Friction Characteristics According to Drawing Variables in Press Drawing Process." Advanced Materials Research 680 (April 2013): 440–45. http://dx.doi.org/10.4028/www.scientific.net/amr.680.440.

Full text

Abstract:

Friction is generated between a press tool and a material during the inflow of material in an automotive press drawing process. Currently, there is deficienttechnical information on such tool-material friction properties. This study is accordingly aimed to understand friction characteristics by investigating them from drawing variables in the press deep-drawing process for steel plates of 590MPa grade and above that are recently being applied for the reduction of weight and improvement of safety of automobiles. The drawing variables in this study are blank holder holding pressure, drawing velocity, and tool surface treatment, which are tested and applied for stamping analysis. The results showed that for holding pressure and drawing velocity, friction coefficient decreases as holding pressure and drawing velocity increases. In case of friction properties according to tool surface treatment, friction coefficient is lower in surface-treated tools compared to non-surface-treated tools, which verifies the need for surface treatment when fabricating press tools. In addition, this study ascertained the need to have a stamping analysis that considered actual drawing variables when analyzingforming by verifying the results of drawing simulations after applying the experimented friction coefficient in the stamping analysis.

APA, Harvard, Vancouver, ISO, and other styles

36

Kuvaitseva, Y. S. "Glaucoma surgery results: ahmed valve and ex-press shunt in patients with secondary glaucoma." Modern technologies in ophtalmology, no. 4 (August 29, 2022): 33–38. http://dx.doi.org/10.25276/2312-4911-2022-4-33-38.

Full text

Abstract:

Purpose. To increase the efficiency of surgical treatment of patients with secondary glaucoma using microfistulizing and micro-shunting operations: Ahmed valve implantation and Ex-press shunt. Material and methods. 53 patients (53 eyes) with secondary glaucoma underwent surgical treatment in the form of implantation of Ex-press shunt and Ahmed valve (models FP7, FP8) in the Orenburg branch of The S. Fyodorov Eye Microsurgery Federal State Institution. We analyzed the results of surgical treatment of these groups of patients 1, 3, 6 and 12 months after surgery. Results. The Ahmed valve system creates a longer stable hypotensive effect in secondary glaucoma in 26 cases (85.7 %) during follow-up up to 1 year after surgery than Ex-press shunt implantation, suspending the progression of glaucoma neuroopticopathy. The degree of proliferative and scarring changes in the angle of the anterior chamber directly depends on the values of IOP: the lower the IOP level, the less the degree of changes in the angle of the anterior chamber of the eye. Conclusion. Implantation of the Ahmed valve and Ex-press shunt is a low-traumatic operation and is an effective way to compensate for secondary glaucoma due to other eye diseases in these patients, at the same time, both the hypotensive and optical effects persist even one year after the operation. Keywords: unstabilized glaucoma, Ahmed valve, Ex-press valve, true pressure.

APA, Harvard, Vancouver, ISO, and other styles

37

Leśniak, D., and A. Woźnicki. "Extrusion of AlCuMg Alloys with Simultaneous Solution Heat Treatment." Archives of Metallurgy and Materials 57, no. 1 (March 1, 2012): 19–31. http://dx.doi.org/10.2478/v10172-011-0148-z.

Full text

Abstract:

Extrusion of AlCuMg Alloys with Simultaneous Solution Heat Treatment In the work, the experiments on extrusion of high-strength aluminium alloys (2014 and 2024) with solution heat treatment on the press were performed. The experimental study describes extrudates microstructure and mechanical properties in dependence on alloy chemical composition, mode of homogenization treatment and temperature-speed extrusion conditions. The optical microscopy and SEM/EDS characterization were supported by DSC analysis, enabling to determine the solidus temperatures of the alloys. The investigations revealed that minimal contents of the main alloy additions (Cu, Mg), high-temperature homogenization and increased extrusion temperatures contributed to achieving high solutioning ratio of the alloys, guarantying improved mechanical properties of the extrudates. The high-temperature homogenization allowed achieving uniform microstructure of ingots with fine particles of intermetallic phases. The significant increase in solidus temperatures of the homogenized alloys enabled more effective solutioning on the run-out table. The maximal permissible metal exit speed was increased and the extrusion force was reduced in comparison to the conventional extrusion technology. The proposed solutions will allow for industrial producing AlCuMg extrudates of improved mechanical properties in the shortened technological cycle with heat treatment on the press.

APA, Harvard, Vancouver, ISO, and other styles

38

Ikram, Adnan, Namra Farooq, Ushnah Khan, Atta Muhammad, Mehwish Niaz, and Anam Mehmood. "The Effect of Humor Intervention Program on Positive and Negative Symptoms among Schizophrenic Patients." Pakistan Journal of Medical and Health Sciences 15, no. 9 (September 30, 2021): 2554–56. http://dx.doi.org/10.53350/pjmhs211592554.

Full text

Abstract:

Background: Non-specifically pain in the low back occurs in 85% percent of population. Examples like Posterior to anterior mobilization and press up exercises are rapidly used as most common physical therapy intervention for the reduction of pain in low back. Aim: Major purpose of this study is to find out the influence of posterior to anterior mobilization of spine and prone press-ups exercises in reduction of pain due to nonspecific reasons in low back. Materials and Methods: The design of this study conducted was randomized clinical trial. Thirty subjects who fulfill the inclusion criteria were chosen subjectively from the department of physical therapy of Ayesha Hospital Lahore. Duration of study was six months, from November 2020 to April 2021. Two groups were made with selection of fifteen participants in each group. Posterior to anterior glides to lumber spine combined with the inclined press up's exercises of lumber was given to group II. Subjects chosen in group II were observed before the treatment started and after the completion of the treatment for NPRS and utilitarian incapacity. The posterior to anterior glide to lumber spine was given to the participants of group I. participants of group I were also examined before the start of the treatment and after the completion of entire treatment and NPRS along with functional incapacity were also observed at the end of the treatment. Results: Pain in low back spine is decreased in both of the selected groups I and II. Statistical importance occurs in results of both the groups in all its limitations. Both groups were similar in normality measurement values with p-value>0.05. Conclusion: Posterior to anterior mobilization and press-up exercises can be used as effective Keywords: Nonspecific pain in low back, prone press up exercises, posterior to anterior mobilization of spine.

APA, Harvard, Vancouver, ISO, and other styles

39

Anderson, Fay. "Chasing the Pictures: Press and Magazine Photography." Media International Australia 150, no. 1 (February 2014): 47–55. http://dx.doi.org/10.1177/1329878x1415000112.

Full text

Abstract:

For over a century, press and magazine photography has influenced how Australians have viewed society, and played a critical role in Australia's evolving national identity. Despite its importance and longevity, the historiography of Australian news photography is surprising limited. This article examines the history of press and magazine photography and considers its genesis, the transformative technological innovations, debates about images of violence, the industrial attitudes towards photographers and their treatment, the use of photographs and the seismic recent changes. The article argues that while the United States and United Kingdom influenced the trajectory of press and news photography in Australia, there are significant and illuminating differences.

APA, Harvard, Vancouver, ISO, and other styles

40

Lun, Hai Bo, and Yi Ting Zhang. "Discussion of Treatment of Wastewater and Sludge from Viscose Industry." Applied Mechanics and Materials 587-589 (July 2014): 684–87. http://dx.doi.org/10.4028/www.scientific.net/amm.587-589.684.

Full text

Abstract:

This paper has a preliminary discussion of viscose wastewater treatment, proposes the primary materialization treatment of viscose wastewater through experimentation and makes a contract analysis of the two technological processes of the sludge dehydration, thus summarizes the combination treatment of the primary materialization and plate and frame filter press for the viscose wastewater and sludge.

APA, Harvard, Vancouver, ISO, and other styles

41

Pandji Nugraha, Mohammad, Ilham Fahira Minan Nurrohman, Haris Ardianto, and Hery Setiawan. "TENSILE TEST OF CARBON CLOTH COMPOSITE WITH MATRIX POLYPROYLENE RECYCLING WITH WORKING TEMPERATURE PARAMETER OF 600℃ WITH METAL AND CERAMIC PRESS MEDIA." Teknika STTKD: Jurnal Teknik, Elektronik, Engine 8, no. 1 (July 30, 2022): 52–57. http://dx.doi.org/10.56521/teknika.v8i1.504.

Full text

Abstract:

Right now the distribution of polypropylene in the environment has become more and more so that it can pollute the environment. Thus polypropylene waste can be converted into a composite matrix. In this study, the manufacture of composites from recycled polypropylene was carried out, to be further combined with carbon fiber. After that, tensile testing is carried out to find out the mechanical properties. As a variation, there are differences in press media, namely using metal and ceramics. This research method is carried out experimentally, where when polypropylene waste has been softened using a heat gun at a temperature of 600 °C, it is emphasized using aluminum metal and ceramics so that polypropylene can be solid. Then for the dimensions of its manufacture according to ASTM D 638 for recycled polypropylene and ASTM D3039 for recycled polypropylene matrix carbon fiber composites. From the tensile test results for ASTM D638, specimens with suppression treatment using metal press media have an average maximum tensile strength of 5.40 MPa. As for specimens with ceramic press media has an average value of 6.32 MPa. Tensile testing on recycled polypropylene matrix carbon fiber composite specimens showed tensile strength with a value of 7.53 MPa for the treatment of metal press media and for ceramic press media its strength value of 10.66 MPa. Thus ceramic press media in the polypropylene composite manufacturing process is better than metal press media

APA, Harvard, Vancouver, ISO, and other styles

42

JAHAN, M. SARWAR, RAJESH CHANDRA DEB, M. MOSTAFIZUR RAHAMAN, and M. A. QUAIYYUM. "Dissolving pulp from white press cuttings." April 2016 15, no. 4 (May 1, 2016): 277–82. http://dx.doi.org/10.32964/tj15.4.277.

Full text

Abstract:

Upgrading of white press cuttings into dissolving pulp was carried out by acidification followed by alkaline extraction. Acid treatment decreased ash content of white press cutting pulp from 11.25% to 0.33% at pH 2. The yield after acidification and screening was 87%. Alkaline extraction removed hemicelluloses and increased α-cellulose content to 92% with viscosity value of 4.3 mPa.s. The overall pulp yield after alkaline extraction was 76.6%. Alkaline extracted liquor contains 9.2% total organics, mostly pentose sugars in the oligomeric form. The produced dissolving pulp can be used for rayon production.

APA, Harvard, Vancouver, ISO, and other styles

43

Bailey, W. F., and T. G. Shea. "Expansion of Advanced Wastewater Treatment Facilities at Washington, D.C." Water Science and Technology 20, no. 4-5 (April 1, 1988): 303–13. http://dx.doi.org/10.2166/wst.1988.0180.

Full text

Abstract:

Advanced wastewater treatment facilities at Washington D.C.'s Blue Plains plant are being expanded and upgraded to provide increased capacity. In order to continue meeting the very stringent discharge limitations, modifications will be made to the secondary and nitrification activated sludge systems, wastewater filters, disinfection system, and plant instrumentation. Major upgrades are planned for sludge processing including construction of centrifuge and filter press dewatering facilities, mechanical composting and fluid bed incineration.

APA, Harvard, Vancouver, ISO, and other styles

44

Kommel, Lembit, and Janis Baroninš. "Dependance of Wear of Cu-Cr-S Alloy on Hardness and Electrical Conductivity in Sliding Electrical Contact." Solid State Phenomena 267 (October 2017): 229–33. http://dx.doi.org/10.4028/www.scientific.net/ssp.267.229.

Full text

Abstract:

Wear of material in unlubricated sliding type electrical contact (e.g. contact wires for trolleys and rotor materials in electric engines and current generators) is one of the main failure causing modes of copper (Cu)-based alloys. High electrical conductivity, high tensile strength, suitable hardness and wear resistance under such conditions should be provided. In a present paper required properties of dispersion-hardened Cu-based electrical conductive alloy (Cu-0.68 wt. % Cr-0.02 wt. % S) were obtained by equal-channel angular press treatment with following six press treatments by Bc route and suitable heat treatment. The wear tests were carried out in unlubricated sliding pair with graphite disk. Optimal properties were reached after annealing at 450 °C for 1 h, exhibiting a lowest wear rate (~1.9268·10-9 g·m-1), high electrical conductivity (up to 95 % IACS) and Vickers microhardness up to 1.7 GPa, respectively.

APA, Harvard, Vancouver, ISO, and other styles

45

Hawrylik, Eliza, and Andrzej Butarewicz. "Toxicity assessment of sewage sludge from municipal sewage treatment plants." Ekonomia i Środowisko - Economics and Environment 82, no. 3 (October 26, 2022): 257–68. http://dx.doi.org/10.34659/eis.2022.82.3.491.

Full text

Abstract:

The aim of this study was to assess the toxicity of sewage sludge from the municipal sewage treatment plant in Bialystok. Raw sewage, sewage sludge from the primary settling tank, activated sludge, sludge before the fermentation chamber, recirculated sludge and sewage sludge after fermentation and dehydration on press were tested. The Microtox Model 500 kit using Aliivibrio fischeri luminescent bacteria was used for the toxicity analyzes. The EC50 index (indicating the concentration of toxic substances resulting in a 50% reduction in the intensity of luminescence of the bacterial strains used) converted into the TUa toxicity units was adopted as the value describing the toxicity of the tested media. The obtained results showed high and very high ecotoxicity of raw sewage and sewage sludge from the primary settling tank, sludge in front of the fermentation chamber and after fermentation and dehydration in the press. The use of tests determining the toxicity of sewage flowing into the sewage treatment plant and sewage sludge generated at various stages of the treatment process allows to detect the danger associated with the uncontrolled discharge of toxic substances into the sewage system.

APA, Harvard, Vancouver, ISO, and other styles

46

Seymour, R. C., J. B. Campbell, and R. J. Wright. "Corn Rootworm Larval Control, 1990." Insecticide and Acaricide Tests 16, no. 1 (January 1, 1991): 171. http://dx.doi.org/10.1093/iat/16.1.171.

Full text

Abstract:

Abstract Granular insecticides were applied to suppress larval rootworm populations in two fields in west central Nebr. Insecticides were applied to Field I at planting on 18 May with application boxes on a John Deere Max-emerge planter. Two replications of each treatment were arranged in a randomized complete block design. T-Band applications were made in a 7.0 inch band in front of the press wheel. Banded applications were made by applying a 7.0 inch band behind the press wheel. In-furrow applications were made by applying insecticide directly into the seed furrow. Corn variety for Field I was undetermined at time of writing. Insecticides were applied to Field II at the time of irrigation furrow construction, 27 Jun, to the base of the plants, with International Harvester boxes on a Hawkins/Bridger ditching unit. Treatments in Field II were replicated 3 times and arranged in a randomized complete block design. All treatments were evaluated 13 Jul by rating washed roots, using the 1-6 Iowa State root rating scale, of 4 plants from each treatment.

APA, Harvard, Vancouver, ISO, and other styles

47

Villena-Alarcón, Eduardo. "El tratamiento informativo de la moda en la prensa española: el caso de David Delfín." RIHC. Revista Internacional de Historia de la Comunicación, no. 10 (2018): 150–64. http://dx.doi.org/10.12795/rihc.2018.i10.08.

Full text

APA, Harvard, Vancouver, ISO, and other styles

48

Turpo-Gebera, Osbaldo, Gerber Pérez-Postigo, and Rocío Díaz-Zavala. "teachers' conflict in the peruvian press." VISUAL REVIEW. International Visual Culture Review / Revista Internacional de Cultura Visual 9, Monográfico (November 11, 2022): 1–11. http://dx.doi.org/10.37467/revvisual.v9.3679.

Full text

Abstract:

The press builds a set of media representations on the facts of reality. The teachers' strike of 2017 marked a substantial milestone in the construction of the news in the Peruvian press, due to the informative singularity and prevalent discourses. Based on the analysis of the informative treatment of the journalistic notes, the underlying media intentions are revealed to present the teachers' conflict, from the conjuncture or anecdote, avoiding its causes; on the contrary, they highlight the scandal or spectacularism of the news. In fact, the media opted for sensationalism, linking the teachers' crisis with violence, anarchy and urban chaos.

APA, Harvard, Vancouver, ISO, and other styles

49

Hotta, Katsuyoshi, Hajime Miyazawa, Takashi Ogue, Kazushi Sugawara, and Haruo Hirose. "Laser Treatment of Press Formed Superconducter Powder of Bi System." Journal of the Japan Society of Powder and Powder Metallurgy 48, no. 12 (2001): 1156–59. http://dx.doi.org/10.2497/jjspm.48.1156.

Full text

APA, Harvard, Vancouver, ISO, and other styles

50

Savage, L. "Press Release: Bisphosphonate Treatment Is Associated with Jaw Bone Problems." JNCI Journal of the National Cancer Institute 99, no. 13 (July 3, 2007): 981. http://dx.doi.org/10.1093/jnci/djm067.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!