Relevant bibliographies by topics / Press station

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Press station'

Author: Grafiati
Published: 28 June 2021
Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Press station.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Press station"

1

Jin, Jionghua. "Individual Station Monitoring Using Press Tonnage Sensors for Multiple Operation Stamping Processes." Journal of Manufacturing Science and Engineering 126, no. 1 (February 1, 2004): 83–90. http://dx.doi.org/10.1115/1.1643749.

Full text
Abstract:
In multiple operation stamping processes, a press tonnage signal measured by press tonnage sensors installed on press linkages/uprights, is the summation of die forces at all stations. Different from the current practice of using a whole cycle of press tonnage signals to monitor the compound condition of all stations, this paper proposes a new method to use the partitioned monitoring segments of press tonnage signals to monitor individual station conditions. For this purpose, a generic signal segmentation principle is proposed, and the Hotelling T2 control charts are developed with consideration of the interactions among stations. A real case study of a doorknob stamping process is provided to demonstrate analysis procedures and effectiveness of the developed methodology.
APA, Harvard, Vancouver, ISO, and other styles
2

Fellows, David. "Weather Station press coverage." Weather 62, no. 10 (October 4, 2007): 292. http://dx.doi.org/10.1002/wea.148.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Rizal, Syamsul, and Linda Rahmawati. "Analysis Of Oil Losses at Press Station In PT. Palmina Utama." Agrisains: Jurnal Budidaya Tanaman Perkebunan Politeknik Hasnur 6, no. 02 (June 10, 2021): 37–41. http://dx.doi.org/10.46365/agrs.v6i02.400.

Full text
Abstract:
The press station is the main station for quoting oil from the pulp of palm oil (CPO). In the screw press, there are several things that need to be considered in order to determine the success of the extraction process, namely the percentage level of oil losses which is one of the benchmarks for the success of extraction at the press station. Some things that can affect the percentage level of oil losses at the press station are the amount of pressure on the press machine and the level of chopping blades in the digester. This observation is carried out by direct observation method at PT. Palmina Utama, using a purposive sampling method.samples taken for the analysis of oil losses at this press station are in the form of fiber, the persentage value of oil losses is determined by exstraction using soxhlet with n-hexane solvent. Samples for analysis were taken from five press machines at the press station in the form of fiber and taken three times each at three points, namely the left side, the middle side and the right side with an interval of two hours, then the samples were mixed and weighed as much as nine to ten gram. The highest oil losses in February were 4.48% and the lowest losses during February were 4.105%. Based on statistical analysis, that F-Count is smaller than F-table 5% and 1%. Thus, pressure does not affect at the percentage of oil losses.
APA, Harvard, Vancouver, ISO, and other styles
4

Nowogoński, Ireneusz, Ewa Ogiołda, and Marlena Kubiszyn. "MODELING OF PUMP OPERATION CONDITIONS IN GRAVITY-PRESSURE COMBINED SYSTEMS." Zeszyty Naukowe Uniwersytetu Zielonogórskiego / Inżynieria Środowiska 168, no. 48 (December 29, 2017): 35–44. http://dx.doi.org/10.5604/01.3001.0011.5886.

Full text
Abstract:
The paper presents the problem of working conditions in gravitationalpressure systems simulation. The practical example takes into account the dynamical analysis of a system equipped with 10 pump stations with different functions. Both local press stations, local stations for shallowing network and transit pumping stations between the towns were used. The model allowed to optimize the active volume of the pump station tanks, the selection of pumps, including the frequency of power on and the time of holding the sewage.
APA, Harvard, Vancouver, ISO, and other styles
5

Fry, Andrew. "EQUIPMENT UTILIZATION #4: Machine bench press station." National Strength & Conditioning Association Journal 8, no. 2 (1986): 44. http://dx.doi.org/10.1519/0744-0049(1986)008<0044:mbps>2.3.co;2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Jin, Jionghua, and Jianjun Shi. "Press Tonnage Signal Decomposition and Validation Analysis for Transfer or Progressive Die Processes." Journal of Manufacturing Science and Engineering 127, no. 1 (February 1, 2005): 231–35. http://dx.doi.org/10.1115/1.1831287.

Full text
Abstract:
A transfer or progressive die process consists of multiple stations working simultaneously in each stroke. This paper aims to develop a new methodology that can decompose press tonnage signals to obtain individual station signals without using in-die sensors. In the paper, two different tonnage decomposition tests, as well as the associated data analysis algorithms, are developed. Statistical profile analyses and an in-die sensor test were conducted to validate the proposed methodology.
APA, Harvard, Vancouver, ISO, and other styles
7

Zhong, Kang Min, Ying Hua Xiao, and Ming Di Wang. "The Double-Station Fixture Based on Air-Liquid and Air-Liquid-Mechanical Composite Transmission Technology and its Application in Press." Applied Mechanics and Materials 121-126 (October 2011): 1372–76. http://dx.doi.org/10.4028/www.scientific.net/amm.121-126.1372.

Full text
Abstract:
When adopting the air-liquid and air-liquid-mechanical composite transmission technology, the comparative advantages of various transmission techniques can be played, while their shortcomings can be avoided. The efficient fixture and press with double-station based on these composite transmission technology are introduced, and their working principles and mechanical formulas are given out. The innovative design of the fixture and press with double station can achieve the two station order-processing operations when only using one drive cylinder, which have high efficiency, the large output force, and will not pollute the environment.
APA, Harvard, Vancouver, ISO, and other styles
8

Zhang, Xiao Dong, and Jin Jin Zhang. "Dynamic Design of Six-Station Automatic Hydraulic Stretching Machine." Key Engineering Materials 522 (August 2012): 256–59. http://dx.doi.org/10.4028/www.scientific.net/kem.522.256.

Full text
Abstract:
Hydraulic stretch forming is a very important technology. Punch press has achieved multi-station automatic processing in the press area, which has greatly improved the efficiency. However, the main domestic stretching machine is single-stretching hydraulic machine at present. Compared with punch press, hydraulic stretching machines take less space and have better security, but they make less efficiency and have lower degree of automation. Hence, in order to take the advantage of hydraulic stretching machines and enhance the automation level, studies on multi-position automatic stretching machine occupies an important position. This paper proposes a design scheme of Six-station Automatic Hydraulic Stretching Machine (SAHSM) according to the practical production. The overall 3D structure of SAHSM is designed based on Solidworks to prove the theoretical possibility of the program. Then modal analysis is operated based on FEA of the key components of stretching machine module to improve reliability of the product and overcome the disadvantage of the traditional checking method, the first two-order modes are obtained to prove the impossibility of the resonance. At last, ADAMS-based virtual prototype is analyzed to demonstrate the feasibility and effectiveness of the SAHSM dynamic design proposed in this paper
APA, Harvard, Vancouver, ISO, and other styles
9

DANIELSSON, FREDRIK, and ANITA HANSBO. "CONTROL SYSTEM VERIFICATION BY EMULATION: AN APPLICATION TO OFF-LINE PRESS LINE THROUGHPUT RATE OPTIMIZATION." Journal of Advanced Manufacturing Systems 01, no. 02 (December 2002): 159–72. http://dx.doi.org/10.1142/s0219686702000143.

Full text
Abstract:
This study is part of a research project aims at off-line programming and verification of industrial control systems. In this paper, an off-line method for press line throughput rate optimization and control system verification is proposed, implemented and evaluated. The main tool is a virtual press station, developed by the first author, consisting of an emulated control system for a feeder/extractor robot which communicates with 3D-simulated production equipment. Moreover, several virtual press stations have been coupled and synchronized in a virtual press line. An important feature of the system is that the virtual robot controller is emulated, yielding an exact representation of the control logic and the possibility to run the entire system in virtual real time. The application considered is a sheet metal forming process where it is difficult to achieve maximum capacity utilization. There is much to gain if the control logic is improved and the throughput rate is increased. For this purpose, an automated robot motion optimization method is implemented and evaluated, using the virtual press line.
APA, Harvard, Vancouver, ISO, and other styles
10

Li, Rong. "Design and Research of Hydraulic Station of Hydraulic Tire Curing Press." Advanced Materials Research 507 (April 2012): 172–75. http://dx.doi.org/10.4028/www.scientific.net/amr.507.172.

Full text
Abstract:
Analyzes the change of hydraulic pressure and flow rate during the opening/closing and curing processes in the hydraulic system of hydraulic tire curing machine and proposes a new design of the hydraulic station. By using three groups of motors-variable piston pump to work independently, the new hydraulic station can reduce machine downtime. Through using accumulator to keep pressure and delaying switching time of the valve to gradually release pressure, the new hydraulic station solves the problem of the severe impact caused by pressure relief and improve the safety and relia-bility.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Press station"

1

Dračka, Miroslav. "Návrh pracoviště pro dílčí montáž kompresoru klimatizace." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-443204.

Full text
Abstract:
The subject of this master´s thesis is the design of a single-purpose assembly device for pressing round seats into the cylinders of an air conditioning compressor. The whole thesis leads to a complete 3D model of the machine, including drawings. The 3D model and drawings were created in SOLIDWORKS.
APA, Harvard, Vancouver, ISO, and other styles
2

Egger, Brigitte Egger Brigitte. "Végétation et stations alpines sur serpentine près de Davos /." [S.l.] : [s.n.], 1993. http://e-collection.ethbib.ethz.ch/show?type=diss&nr=10343.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Glorieux, Emile. "Constructive cooperative coevolution for optimising interacting production stations." Licentiate thesis, Högskolan Väst, Avd för automationssystem, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:hv:diva-7685.

Full text
Abstract:
Engineering problems have characteristics such as a large number of variables, non-linear, computationally expensive, complex and black-box (i.e. unknown internal structure). These characteristics prompt difficulties for existing optimisation techniques. A consequence of this is that the required optimisation time rapidly increases beyond what is practical. There is a needfor dedicated techniques to exploit the power of mathematical optimisation tosolve engineering problems. The objective of this thesis is to investigate thisneed within the field of automation, specifically for control optimisation ofautomated systems.The thesis proposes an optimisation algorithm for optimising the controlof automated interacting production stations (i.e. independent stations thatinteract by for example material handling robots). The objective of the optimisation is to increase the production rate of such systems. The non-separable nature of these problems due to the interactions, makes them hard to optimise.The proposed algorithm is called the Constructive Cooperative CoevolutionAlgorithm (C3). The thesis presents the experimental evaluation of C3, bothon theoretical and real-world problems. For the theoretical problems, C3 istested on a set of standard benchmark functions. The performance, robustness and convergence speed of C3 is compared with the algorithms. This shows that C3 is a competitive optimisation algorithm for large-scale non-separable problems.C3 is also evaluated on real-world industrial problems, concerning thecontrol of interacting production stations, and compared with other optimisation algorithms on these problems. This shows that C3 is very well-suited for these problems. The importance of considering the energy consumption and equipment wear, next to the production rate, in the objective function is also investigated. This shows that it is crucial that these are considered to optimise the overall performance of interacting production stations.
APA, Harvard, Vancouver, ISO, and other styles
4

Wernersson, Annie, and Maja Flygt. "Kvinnor som ansluter sig till IS - terrorister eller offer? : En kvantitativ och kvalitativ undersökning av svensk press år 2015-2016." Thesis, Södertörns högskola, Institutionen för samhällsvetenskaper, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:sh:diva-30383.

Full text
Abstract:
Den här studien är en totalundersökning av hur svenska tryckta medier skrivit om europeiska kvinnor som anslutit sig till Islamiska staten (IS), under perioden 1 januari 2015 till 11 april 2016. Studien bygger på två metoder, kvantitativ innehållsanalys av 96 artiklar och kritisk diskursanalys på sex uppslag. Vi har valt en eklektisk ansats i vårt teoretiska ramverk och haft utgångspunkt i fyra teorier, gestaltningsteori, genusteori, kriminologisk teori om det idealiska offret samt postkolonial teori om skapandet av ”den andra”. Frågorna som besvaras berör hur kvinnor som ansluter sig och deras handlingar framställs och hur man kan förstå varför kvinnorna framställs på det sättet. Studien visar att i 65 % av artiklarna ger medierna tydliga förklaringar till varför subjekten anslutit sig, men endast i 9 % av artiklarna vi har gått igenom framställs subjekten som att de fattat ett eget medvetet beslut. I övrigt fann vi fyra typiska inramningar kring kvinnors anslutande till IS. Dessa är att hon har blivit lurad dit, att hon gör det för en partner, att hon åker för att hon har en tom tillvaro hemma och att hon har lockats via internet. I undersökningen kommer vi också fram till att subjekten sällan själva får komma till tals. Kvinnorna som har anslutit sig eller som varit på väg att ansluta sig framställs nästan genomgående som att de fallit offer för IS propaganda. Med vårt teoretiska ramverk förstår vi att kvinnorna inte skrivs om som gärningsmän för att de framställs med stereotypt kvinnliga egenskaper. Kvinnorna framställs som antingen ofullständiga eller som att vara i motsats till det som männen är. I en dikotom relation till mannen tillskrivs kvinnorna egenskaper såsom passiv, underordnad, svag och irrationell.
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Press station"

1

Browning, Dave. Thomas press-out station. London: Heinemann, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Talasanje Srbije: Knjiga o Radiju B92. Beograd: Samizdat B92, 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Gebbie Press all-in-one directory 2011. 4th ed. New Paltz, NY: Gebbie Press, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Geelen, Jean-Pierre. Het Haagse huwelijk: Hoe pers en politiek tot elkaar veroordeeld zijn. Nijmegen: SUN, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

European Institute for the Media. The responsibility of television towards society: Carl bertelsmann prize 1994, working paper. Germany: Bertelsmann foundation, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Casalbuoni, Roberto, Giovanni Frosali, and Giuseppe Pelosi, eds. Enrico Fermi a Firenze. Florence: Firenze University Press, 2014. http://dx.doi.org/10.36253/978-88-6655-673-2.

Full text
Abstract:
Enrico Fermi – Premio Nobel per la Fisica nel 1938 – ha insegnato alla Regia Università degli Studi di Firenze. La permanenza di Fermi a Firenze fu breve, solo due anni accademici (1924-25 e 1925-26); in questi anni tenne i corsi di «Fisica Matematica» e di «Meccanica Razionale». Il presente volume è un contributo alla ricostruzione di questo periodo non molto noto della vita di Fermi, ma segnato scientificamente dalla pubblicazione della statistica che prende il suo nome, base tra l’altro della fisica dei semiconduttori e quindi dell’elettronica moderna. Vengono anche riprodotte nel testo le «Lezioni di Meccanica Razionale» tenute da Enrico Fermi nel periodo predetto agli studenti di Scienze e del biennio propedeutico agli studi di Ingegneria. I temi affrontati da Enrico Fermi nelle sue lezioni includono la cinematica e la dinamica del punto, la cinematica e la statica dei sistemi rigidi, inclusa la statica di sistemi più in generale. Infine le lezioni contengono le equazioni di «Lagrangia» e alcuni elementi di idromeccanica. Questo libro inaugura una collana di pubblicazioni associata alla rivista «Il Colle di Galileo» della Firenze University Press.
APA, Harvard, Vancouver, ISO, and other styles
7

Haagse journalistiek. Amsterdam: VU Uitgeverij, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Sauerland, Dorothea. Grenzüberschreitende raumbezogene Informationen und ihre Defizite im belgisch-niederländisch-deutschen Dreiländereck: Dargestellt am Beispiel von Tageszeitungen und Rundfunksendern. Aachen: Maas-Rhein-Institut für Angewandte Geographie, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

De Boni, Claudio, ed. Lo stato sociale nel pensiero politico contemporaneo. II Novecento. Florence: Firenze University Press, 2010. http://dx.doi.org/10.36253/978-88-8453-370-8.

Full text
Abstract:
Lo stato sociale nel pensiero politico contemporaneo. Il Novecento. Parte seconda: dal dopoguerra a oggi is intended to complete the overview of the presence of the Welfare State concept in contemporary political thought that began in 2007 with the volume dealing with the nineteenth century and then continued in 2009 with the first part of the reconstruction relating to the twentieth century (both published by Firenze University Press). The final period, from the end of the Second World War to the present, is marked by deeply conflicting situations. These range from, on the one hand, the success of the institutions proper to the Welfare State among the artificers of one of the most socially prosperous periods of Western history to, on the other, the surfacing of critical elements with repercussions which are among the most serious political issues of the present time. Uncoiling right through the second half of the twentieth century is the relentless clash between broadly social-democratic theories and those of a neo-liberalist stamp, with the addition of a third source of reflection: the "critical thought" aimed at underscoring the shortcomings of the Welfare State and its substantial dependence on the capitalist cycle. These are the historiographical issues addressed in this book by a number of scholars, engaged in reconstructing the amplitude and the internal breakdown of a debate that involves the political philosophy of the entire contemporary western world. THE THREE VOLUMES: Lo stato sociale nel pensiero politico contemporaneo L'Ottocento Lo stato sociale nel pensiero politico contemporaneo. Il Novecento Parte prima: Da inizio secolo alla seconda guerra mondiale Lo stato sociale nel pensiero politico contemporaneo. Il Novecento Parte seconda: dal dopoguerra a oggi
APA, Harvard, Vancouver, ISO, and other styles
10

Di Lorena, Cristina. Lettere alla figlia Caterina de' Medici Gonzaga duchessa di Mantova (1617-1629). Edited by Beatrice Biagioli and Elisabetta Stumpo. Florence: Firenze University Press, 2015. http://dx.doi.org/10.36253/978-88-6655-732-6.

Full text
Abstract:
Il carteggio tra Cristina e sua figlia Caterina rappresenta un caso unico nel panorama epistolare conservato in casa Medici, per l’ampiezza, per la varietà dei temi trattati, per il tono intimo e confidenziale che traspare dalle lettere. Nei dieci anni trascorsi a Mantova da Caterina le due donne si scambiarono consigli, raccomandazioni e timori che ci permettono di seguire e delineare lo scenario più ampio in cui si muovevano entrambe. Con questa edizione abbiamo ricreato l’unità di un fitto scambio epistolare, costituitosi come unicum nella volontà della scrivente, ma separato poi in due nuclei distinti nelle vicende della sua trasmissione. Sono qui pubblicate le lettere inviate dalla granduchessa Cristina di Lorena alla figlia Caterina de’ Medici Gonzaga presenti nella filza 6110 del fondo Mediceo del Principato conservato nell’Archivio di Stato di Firenze e nelle buste 1095, 1096 e 1097 dell'Archivio Gonzaga presso l'Archivio di Stato di Mantova.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Press station"

1

Takuma, T., S. Nagarajan, M. Nagano, and I. Vaz. "Repair of flood-damaged New York subway station with pressed-in sheet piles." In Proceedings of the Second International Conference on Press-in Engineering 2021, Kochi, Japan, 479–83. London: CRC Press, 2021. http://dx.doi.org/10.1201/9781003215226-54.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Oberdan, Thomas. "Coffa, Alberto J., The Semantic Tradition from Kant to Carnap: To the Vienna Station. Ed. by Linda Wessels. Cambridge: Cambridge University Press 1991, xi + 445pp." In Scientific Philosophy: Origins and Developments, 249–50. Dordrecht: Springer Netherlands, 1993. http://dx.doi.org/10.1007/978-94-017-2964-2_18.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Frankel, Max. "CHAPTER 45. REPORTS ABOUT RED CHINA IN 1972 The Unexpected Nixon Visit and Its Most Important Stations." In Outstanding International Press Reporting (1963–1977), edited by Heinz-Dietrich Fischer, 181–200. Berlin, Boston: De Gruyter, 1986. http://dx.doi.org/10.1515/9783110863109-014.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Okada, K., K. Inomata, and Y. Ishihara. "Results of static vertical load tests on tubular piles installed by Standard Press-in and Rotary Cutting Press-in." In Proceedings of the Second International Conference on Press-in Engineering 2021, Kochi, Japan, 72–78. London: CRC Press, 2021. http://dx.doi.org/10.1201/9781003215226-7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Higano, Yoshiro. "Introduction: Real Estate Tax System and Real Estate Market in Japan." In New Frontiers in Regional Science: Asian Perspectives, 115–22. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-15-8848-8_8.

Full text
Abstract:
AbstractThis introduction summarizes chapters of Part II. In Chap. 10.1007/978-981-15-8848-8_9, Yamamoto (Jpn J Real Estate Sci 31:88–96, 2018) has compared between the street method, the asset valuation adopted for the imposition of property tax in Japan, and the computer-assisted mass appraisal (CAMA) method generally adopted in North America focusing on education and training of valuators. In Chap. 10.1007/978-981-15-8848-8_10, Yamazaki (Jpn J Real Estate Sci 31:97–101, 2018) argues that one of the major causes for relatively low density use of land in the city in Japan is the land tax system. He focuses on property tax and examines defects of the tax from view of economist. In Chap. 10.1007/978-981-15-8848-8_11, Kobayashi (Jpn J Real Estate Sci 31:129–138, 2018), taking an actual example, has examined difference between precise legal interpretation of ‘exemption from real estate acquisition tax due to purpose of use’ and taxation practices conducted by local administrative bodies. In Chap. 10.1007/978-981-15-8848-8_12, Shirakawa and Okoshi (Jpn J Real Estate Sci 31:88–96, 2017) have shown that the real estate companies were committed to transactions as dual agencies to whatsoever degree, and analyzed attributes of real estate brokerage companies which are able to be dual agencies and how such dual agency affects contract price.In Chap. 10.1007/978-981-15-8848-8_13, Ueno (Jpn J Real Estate Sci 31:97–105, 2017) has analyzed impacts of the macroeconomic conditions on the land price gradient curves which are estimated using real estate data of the Tokyo Metropolitan Area in 1970, 1976, 1985, 1988, 1994, 2008, 2010, and 2016. In Chap. 10.1007/978-981-15-8848-8_14, Komatsu (Jpn J Real Estate Sci 31:110–118, 2017) has analyzed impacts that refurbishment of existing apartment has on possible increase in rent using the multinomial probit model and the Tobit model. In Chap. 10.1007/978-981-15-8848-8_15, Hanazato (Jpn J Real Estate Sci 31:119–128, 2017) has shown that around 90% of condominium reconstruction cases are predictable using the estimated discriminant function in terms of objective real estate data only. In Chap. 10.1007/978-981-15-8848-8_16, Ota et al. (Jpn J Real Estate Sci 31:109–119, 2018) have analyzed determinants of rent for rental house, office, and shop within 10-min walking distance from Shibuya Station in Tokyo. Multiple regression analyses are conducted and have shown that space syntax (SS) measures (Hillier and Hanson, The Social Logic of Space. Cambridge University Press, Cambridge, 1984) significantly affect rent as well as conventional location attributes.
APA, Harvard, Vancouver, ISO, and other styles
6

Yi, Guodong, Jundi Wu, and Ruisen Li. "Static and Dynamic Deformation Analysis and Optimization of a Fine Blanking Press Frame." In Advances in Mechanical Design, 953–68. Singapore: Springer Singapore, 2017. http://dx.doi.org/10.1007/978-981-10-6553-8_64.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Szymkiewicz, F., A. Le Kouby, T. Sanagawa, and H. Nishioka. "Feedback on static axial pile load tests for better planning and analysis." In Proceedings of the Second International Conference on Press-in Engineering 2021, Kochi, Japan, 53–63. London: CRC Press, 2021. http://dx.doi.org/10.1201/9781003215226-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Craig, Berry. "Neutrality Summer." In Kentucky's Rebel Press. University Press of Kentucky, 2018. http://dx.doi.org/10.5810/kentucky/9780813174594.003.0006.

Full text
Abstract:
The secessionists and their allies in the press chafed under neutrality. They charged that the unionists were using neutrality as a cover to build support for entering the war on the Union side. The secessionists suffered another hard blow at the polls on June 20, when unionist candidates won nine of Kentucky’s ten seats in the congressional elections. The Southern sympathizers and their newspaper friends pinned their last hopes on the August elections for the state legislature, in which all 100 house seats and half of the 38 senate seats were on the line. Meanwhile, as chances for a Confederate Kentucky melted in the summer heat, some Confederate papers cooled their secessionist ardor and seemed to acquiesce in neutrality, at least for the time being. Neutrality, they reasoned, was better than fighting for the North. But the secessionists stuck to their argument that the “Black Republicans” would destroy slavery and make African Americans and whites equal in Kentucky. The Union Party won its biggest victory yet in the state elections. Thus emboldened, the unionists supported Camp Dick Robinson, a recruiting station for Union army volunteers in central Kentucky. The state was on the verge of abandoning neutrality and fully embracing the Union war effort.
APA, Harvard, Vancouver, ISO, and other styles
9

Koyagi, Mikiya. "Nationalizing the Railway." In Iran in Motion, 63–84. Stanford University Press, 2021. http://dx.doi.org/10.11126/stanford/9781503613133.003.0004.

Full text
Abstract:
Chapter 3 examines the convergence of imperial and Iranian railway imaginations in post–World War I Iran. Drawing on Majles proceedings, the Iranian press, and railway station architecture, this chapter demonstrates that through the railway project the new Pahlavi state attempted to produce a national territorial space with its own distinct economy and culture.
APA, Harvard, Vancouver, ISO, and other styles
10

Bedingfield, Sid. "Epilogue." In Newspaper Wars. University of Illinois Press, 2017. http://dx.doi.org/10.5622/illinois/9780252041228.003.0010.

Full text
Abstract:
This epilogue traces the personal stories of key characters in the years after 1965. John H. McCray was offered editing positions at several black newspapers in the early 1960s, but the black press had begun to decline dramatically by that time. He left South Carolina and moved to Alabama to take a job at his alma mater, Talladega College. As editors of South Carolina two largest white newspapers, Thomas R. Waring, Jr., and William D. Workman, Jr. continued to oppose the new, bi-racial coalition that emerged in the Democratic Party. Modjeska Simkins appeared weekly on a black radio station in Columbia to help organize and register black voters in South Carolina. She and McCray remained estranged despite their history together launching the modern civil rights movement in the state.
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Press station"

1

Suling, Li, Liu Junying, and Zhang Lei. "Design and Implementation of Electro-Hydraulic Control System of Multi-station Press." In 2010 International Conference on Intelligent Computation Technology and Automation (ICICTA). IEEE, 2010. http://dx.doi.org/10.1109/icicta.2010.572.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Dong, Y. L., Y. J. Gu, and K. L. Chen. "Risk based maintenance decision on power station high press feed water system." In 2008 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM). IEEE, 2008. http://dx.doi.org/10.1109/ieem.2008.4738251.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Chen, Po Nien, and Kayvan Karimi. "The impact of a new transport system on the neighbourhoods surrounding the stations: The cases of Bermondsey and West Ham, London." In 24th ISUF 2017 - City and Territory in the Globalization Age. Valencia: Universitat Politècnica València, 2017. http://dx.doi.org/10.4995/isuf2017.2017.5971.

Full text
Abstract:
The impact of a new transport system on the neighbourhoods surrounding the stations: The cases of Bermondsey and West Ham, London Po Nien Chen, Kayvan Karimi Space Syntax Laboratory, The Bartlett School of Architecture, University College London, UKE-mail: po-nien.chen.16@ucl.ac.uk, k.karimi@ucl.ac.uk Keywords: Space Syntax, Jubilee Line Extension, urban regeneration Conference topics and scale: Tools of analysis in urban morphology The impact of new public transport system on the towns and suburbs has been widely considered to be a significant aspect of urban development. However, the spatial configurations which could stimulate the transformation around the neighbourhoods of the station have not been clearly identified. It could be argued that the implementation of transport systems and the creation of new stations would enhance the mobility of the transport network and the accessibility around the station’s vicinity. Furthermore, the dynamics of pedestrian flow, generated by the new transport system might transform the social, cultural and economic activities around the stations. Therefore, the aims of this study are to analyse how the spatial configuration and the urban formation are affected by the implementation of stations and understand how the new stations emerge in the urban form. The Jubilee Line Extension (JLE) in East London, which started to operate in 2000, plays an essential role in connecting Central London with the recently developed financial district in the east. This study focuses on two stations located along the JLE, Bermondsey and West Ham, which have different topological and demographic characteristics. To determine whether the stations integrate cohesively with the urban environment, this study applies Space Syntax methods of spatial network analysis to evaluate the spatial characteristics and compares with GIS data of the house prices and land use distribution before and after the JLE. The results demonstrate a strong correlation between pedestrian movement and the distribution of residential and commercial activities within the street network structure. The study also reveals the strength and weakness of the stations, which are embedded within urban structures and suggests urban regeneration strategies through improving the accessibility and public space design. Reference Chorus, P., Bertolini, L., (2016) ‘Developing transit-oriented corridors: Insights from Tokyo’, International Journal of Sustainable Transportation, 10:2, 86-95. Hillier, B and Hanson, J. (1984) The Social Logic of Space (Cambridge University Press, Cambridge). Kusumo, C, M. (2005) ‘Is a railway station a central urban space? Spatial configuration study of retail distribution pattern around railway stations’, Proceedings, 5th International Space Syntax Symposium, (Delft)
APA, Harvard, Vancouver, ISO, and other styles
4

Sedláková, Veronika, Ludvík Kašpar, and Tomáš Týkal. "Experiences With New Neutralization Technologies for Remediation After ISL Mining of Uranium in Stráž pod Ralskem." In ASME 2013 15th International Conference on Environmental Remediation and Radioactive Waste Management. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/icem2013-96248.

Full text
Abstract:
A big affection of the rock environment and groundwaters occured during the chemical mining of uranium in the years 1966 to 1996 in the neighbourhood of the town Straz pod Ralskem in the Czech Republic. It is necessary to clean the residual technological solutions (RTS) from the underground. The pH of the solutions in some places is still less than 2 and the concentration of sulphates reachs up to 65 g/l. The remedial activities consist of pumping of the RTS from the ground and reprocessing of the RTS in the surface technologies. The implementation of the new neutralization technologies NDS ML and NDS 10 help us with increasing of the efficiency of the remedial process. The NDS ML technology (“Mother liquor reprocessing station”) started its operation in 2009 and it processes the concentrated technological solution from the evaporation station after the alum crystalization (mother liquor) with the concentration of total dissolved solids up to 250 g/l. The principle is the neutralization of the acid solutions with the aid of the lime milk. The suspension is then filtrated in the filter press, the filter cake is deposited in the tailings pond and the filtrate is injected back into the underground rock environment. The NDS 10 technology (“Neutralization and Decontamination Station NDS 10”) started its operation in 2012 and it works on the same technological principle as the NDS ML station. The difference is that the NDS 10 station can process higher volume (4.4 m3/min) of the RTS with lower concentration of total dissolved solids 20–25 g/l. This poster describes the experiences of the state enterprise DIAMO with putting of these two neutralization technologies into operation and with using of the lime milk neutralization in such a large scale.
APA, Harvard, Vancouver, ISO, and other styles
5

Li, Yuefeng, and Tieqiang Wang. "The structural static analysis of four-column hydraulic press." In 2015 IEEE International Conference on Mechatronics and Automation (ICMA). IEEE, 2015. http://dx.doi.org/10.1109/icma.2015.7237673.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Wang, Fang, and Long Wang. "Dynamic-static analysis of sheet-transfer mechanism for high-speed offset press." In 2012 2nd International Conference on Consumer Electronics, Communications and Networks (CECNet). IEEE, 2012. http://dx.doi.org/10.1109/cecnet.2012.6201771.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Li, Shuo. "The Simulation Research on Hydraulic Static Pile Press Machine Body Leveling Movement." In 2012 Second International Conference on Intelligent System Design and Engineering Application (ISDEA). IEEE, 2012. http://dx.doi.org/10.1109/isdea.2012.450.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Deadman, Jason. "Analysis of a Bolted Joint Failure in a Hydraulic Press." In ASME/JSME 2004 Pressure Vessels and Piping Conference. ASMEDC, 2004. http://dx.doi.org/10.1115/pvp2004-2237.

Full text
Abstract:
Micrographic inspection, acceleration tests, Finite Element Analysis and detailed fatigue failure calculations for combined static and dynamic loadings, were used in determining the cause of failure, and an acceptable repair solution, for a critical bolted joint. The bolted joint holds together the piston and ram within a hydraulic press. The press had been in operation for eleven years when the failure occurred. As the press is used in a critical process operation, a repair solution and future maintenance strategy was required that would minimize the possibility of future failures and permit maintenance during planned outages. This paper discusses the method that was followed to arrive at an acceptable solution.
APA, Harvard, Vancouver, ISO, and other styles
9

Tu, Kuo-Yang, and Yun-Hsiang Sun. "Static stable regions acording to Center Of Press to quantify humanoid walking stability." In 2011 IEEE International Symposium on Robotic and Sensors Environments (ROSE). IEEE, 2011. http://dx.doi.org/10.1109/rose.2011.6058526.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Jin, Zhenlin, Kai He, and R. Du. "On the Design of a Novel Controllable Mechanical Metal Forming Press Based on 2-DOF Planar Mechanism." In ASME 2005 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2005. http://dx.doi.org/10.1115/detc2005-84713.

Full text
Abstract:
It is known that the punch motion has a significant effect on sheet metal stamping operations. For example, for deep drawing operations long dwelling is desirable. For blanking operations, on the other hand, the two-step motion can reduce the noise [1]. However, the controlled punch motion cannot be realized using conventional mechanical presses, which has the advantage of being energy efficient, fast and easier to make / maintain. Servo mechanical presses solved some of the problems, but are not energy efficient (because they cannot use flywheels as the conventional mechanical presses). Following our previous research [2–4], this paper presents a new type of controllable mechanical press. It is a 2-DOF planar mechanism driven by a large constant speed motor (which takes 75% of the load) and a small servomotor (which takes 25% of the load). Though, unlike the first design, the new design uses the servomotor to drive a ball screw instead of a crank, which makes building the press simpler and controlling the press easier. The paper describes various issues in designing and controlling the press including (a) Kinematics and inverse kinematics; (b) Static force distribution analysis and parameter design; and (c) Punch motion programming and control. A 250 KN prototype has been built and the experimental testing results confirm that the press is working properly. Comparing to the existing technology, the new press is controllable and energy efficient. It is expected that it will have a significant value to the metal forming industry.
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Press station"

1

CAE Correlation of Sealing Pressure of a Press-in-Place Gasket. SAE Imposter, April 2021. http://dx.doi.org/10.4271/2021-01-0299.

Full text
Abstract:
The Press-in-Place (PIP) gasket is a static face seal with self-retaining feature, which is used for the mating surfaces of engine components to maintain the reliability of the closed system under various operating conditions. Its design allows it to provide enough contact pressure to seal the internal fluid as well as prevent mechanical failures. Insufficient sealing pressure will lead to fluid leakage, consequently resulting in engine failures. A test fixture was designed to simulate the clamp load and internal pressure condition on a gasket bolted joint. A Sensor pad using TEKSCAN equipment was used to capture the overall and local pressure distribution of the PIP gasket under various engine loading conditions. Then, the Sensor pad test results were compared with simulated CAE results from computer models. Through the comparisons, it is found that the gasket sealing pressure of test data and CAE data show good correlation for bolt load condition 500N when compared to internal pressure side load condition of 0.138 MPa & 0.276 MPa. Moreover, the gasket cross-sectional pressure distribution obtained by experimental tests and CAE models correlated very well with R2 ranging from 90 to 99% for all load cases. Both CAE and Sensor pad test results shows increase in sealing pressure when internal side pressure is applied to the gasket seal.
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Press station' for particular source types:
Journal articles Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography