Journal articles: 'Power Oscillation Damping Controller'

1

Anarkooli, M. Yousefi, and H. Afrakhteh. "Improvement Model Damping Low Frequency Oscillations Presence UPFC by Cuckoo Optimization Algorithm." Indonesian Journal of Electrical Engineering and Computer Science 3, no. 1 (July 1, 2016): 67. http://dx.doi.org/10.11591/ijeecs.v3.i1.pp67-79.

Full text

Abstract:

Low frequency oscillation (LFO) is a negative phenomenon repeated for the power system increases the risk of instability. In recent years, power systems stabilizer (PSS) for damping low frequency oscillations is used. With FACTS devices such as integrated power flow controller (UPFC) can control power flow and transient stability increase. So, UPFC low frequency oscillation damping can be used instead of PSS. UPFC through direct control voltage and low frequency oscillation damping can be improved. In this study, a single linear model of synchronous machine connected to an infinite bus Heffron-Philips in the presence of UPFC to improve low frequency oscillation damping is used. The selection of the output feedback parameters for the UPFC controllers is converted to an optimization problem which is solved by cuckoo optimization algorithm (COA). COA, as a new evolutionary optimization algorithm, is used in multiple applications. This optimization algorithm has a strong ability to find the most optimistic results for dynamic stability improvement. The controller UPFC and damping in MATLAB software environment is designed and simulated. The simulation was performed for a variety of loads and for various loads and more effective UPFC controller electromechanical oscillation damping compared to other algorithm types is shown.

APA, Harvard, Vancouver, ISO, and other styles

2

Oni, Oluwafemi Emmanuel, and Omowunmi Mary Longe. "Analysis of Secondary Controller on MTDC Link with Solar PV Integration for Inter-Area Power Oscillation Damping." Energies 16, no. 17 (August 29, 2023): 6295. http://dx.doi.org/10.3390/en16176295.

Full text

Abstract:

Integration of renewable energy sources is important in limiting the continuous environmental degradation and emissions caused by energy generation from fossil fuels and thus becoming a better alternative for a large-scale power mix. However, an adequate analysis of the interaction with the alternating current (AC) network during network disturbance, especially during inter-area power (IAP) oscillations is needed. Insufficient damping of oscillations can significantly impact the reliability and effective operation of a whole power system. Therefore, this paper focuses on the stability of the modified Kundur two-area four-machine (MKTAFM) system. A robust secondary controller is proposed and implemented on a line commutated converter (LCC)-based multi-terminal high voltage direct current (MTDC) system. The solution consists of a local generator controller and the LCC MTDC (LMTDC) system, voltage-dependent current order limiter, and extinction angle controller. The proposed robust controller is designed for the LMTDC systems to further dampen the inter-area power oscillations. Three operational scenarios were implemented in this study, which are the local generator controller and double circuits AC line, local generator controller with LMTDC controllers, and local generator controller with LMTDC controllers and secondary controller. The simulation result carried out on PSCAD/EMTDC recorded better damping of the inter-area power oscillation with LMTDC. A considerable improvement of 100% damping of the IAP oscillations was observed when a secondary controller was implemented on the LMTDC.

APA, Harvard, Vancouver, ISO, and other styles

3

Prabowo, Dwi Agus, and Istiyo Winarno. "Thyristor Controlled Series Capasitor Berbasis Adaptive Fuzzy Logic Controller Sebagai Percepatan Peredaman Osilasi Daya Pada Sistem Tenaga." JEEE-U (Journal of Electrical and Electronic Engineering-UMSIDA) 2, no. 1 (April 26, 2018): 37–41. http://dx.doi.org/10.21070/jeee-u.v2i1.1514.

Full text

Abstract:

The current population growth is very fast, so also the number of settlements more evenly, with this demand fulfillment demand for electricity is increasingly widespread and more, therebr making electric power generation service providers continue to strive to provide uniform and stable electrical energy. On the other hand there is an impact due to the many loads on the network electricity that can not be estimated its use, rise and fall of the load, therefore the power system stability must be maintained, this makes the stability of the power system the main concern in a operating. Without good dampening the disturbance will be isolated in the system and out of the stability area, so it can lead to worse effects such as total blackout. Thyristor Controlled Series Capacitor (TCSC) is a device that can be used to regulate power inmadance of power system. TCSC has three main components such as inductor, capacitor, and thyristor. The way TCSC works is by setting the angle of ignition, here the adaptive fuzzy controller is used as the best alpha-viewer the system needs. From the comparison simulation, the difference of fuzzy controller with adaptive fuzzy with fuzzy controller can reduce oscillation at 0.68 second average time and with fuzzy oscillation adaptive controller that can be muffled at 0.56 seconds, with this adaptive fuzzy controller capable damping oscillations 0.12 seconds faster in comparison with fuzzy controllers. So with this oscillation damping can reduce the impact of isolated disturbances in the system.

APA, Harvard, Vancouver, ISO, and other styles

4

Hussain, A. N., F. Malek, M. A. Rashid, L. Mohamed, and N. A. Mohd Affendi. "Optimal Coordinated Design of Multiple Damping Controllers Based on PSS and UPFC Device to Improve Dynamic Stability in the Power System." Mathematical Problems in Engineering 2013 (2013): 1–15. http://dx.doi.org/10.1155/2013/965282.

Full text

Abstract:

Unified Power Flow Controller (UPFC) device is applied to control power flow in transmission lines. Supplementary damping controller can be installed on any control channel of the UPFC inputs to implement the task of Power Oscillation Damping (POD) controller. In this paper, we have presented the simultaneous coordinated design of the multiple damping controllers between Power System Stabilizer (PSS) and UPFC-based POD or between different multiple UPFC-based POD controllers without PSS in a single-machine infinite-bus power system in order to identify the design that provided the most effective damping performance. The parameters of the damping controllers are optimized utilizing a Chaotic Particle Swarm Optimization (CPSO) algorithm based on eigenvalue objective function. The simulation results show that the coordinated design of the multiple damping controllers has high ability in damping oscillations compared to the individual damping controllers. Furthermore, the coordinated design of UPFC-based POD controllers demonstrates the superiority over the coordinated design of PSS and UPFC-based POD controllers for enhancing greatly the stability of the power system.

APA, Harvard, Vancouver, ISO, and other styles

5

Liu, Cheng, Guowei Cai, Deyou Yang, Zhenglong Sun, and Mingna Zhang. "The Online Identification of Dominated Inter-area Oscillations Interface Based on the Incremental Energy Function in Power System." Open Electrical & Electronic Engineering Journal 10, no. 1 (September 30, 2016): 88–100. http://dx.doi.org/10.2174/1874129001610010088.

Full text

Abstract:

The online identification of power system dominated inter-area oscillations interface based on the incremental energy function method is proposed in this paper. The dominant inter-area oscillations interface can be obtained by calculating branch oscillation potential energy, which is tie-line concentrated by oscillations energy. To get the oscillation energy caused by the different mechanism (free oscillation and forced oscillation), different fault position, different oscillation source. Power system dominated inter-area oscillations interface can be effectively obtained by proposed method, at the same time, dominated inter-area oscillations clusters also can be obtained. Finally, damping property of power system is effectively improved by configurating series damping controller in the dominant oscillation profile. The accuracy of the dominant oscillation interface identification is verified in this paper. At the same time, the proposed approach can also provides the basis for the configuration of damping control based on line.

APA, Harvard, Vancouver, ISO, and other styles

6

Niamul Islam, Naz, M. A. Hannan, Hussain Shareef, Azah Mohamed, and M. A. Salam. "Comparative Study of Popular Objective Functions for Damping Power System Oscillations in Multimachine System." Scientific World Journal 2014 (2014): 1–8. http://dx.doi.org/10.1155/2014/549094.

Full text

Abstract:

Power oscillation damping controller is designed in linearized model with heuristic optimization techniques. Selection of the objective function is very crucial for damping controller design by optimization algorithms. In this research, comparative analysis has been carried out to evaluate the effectiveness of popular objective functions used in power system oscillation damping. Two-stage lead-lag damping controller by means of power system stabilizers is optimized using differential search algorithm for different objective functions. Linearized model simulations are performed to compare the dominant mode’s performance and then the nonlinear model is continued to evaluate the damping performance over power system oscillations. All the simulations are conducted in two-area four-machine power system to bring a detailed analysis. Investigated results proved that multiobjective D-shaped function is an effective objective function in terms of moving unstable and lightly damped electromechanical modes into stable region. Thus, D-shape function ultimately improves overall system damping and concurrently enhances power system reliability.

APA, Harvard, Vancouver, ISO, and other styles

7

Uddin, Zeb, Zeb, Ishfaq, Khan, Ul Islam, Tanoli, Haider, Kim, and Park. "A Neural Network-Based Model Reference Control Architecture for Oscillation Damping in Interconnected Power System." Energies 12, no. 19 (September 24, 2019): 3653. http://dx.doi.org/10.3390/en12193653.

Full text

Abstract:

In this paper, a model reference controller (MRC) based on a neural network (NN) is proposed for damping oscillations in electric power systems. Variation in reactive load, internal or external perturbation/faults, and asynchronization of the connected machine cause oscillations in power systems. If the oscillation is not damped properly, it will lead to a complete collapse of the power system. An MRC base unified power flow controller (UPFC) is proposed to mitigate the oscillations in 2-area, 4-machine interconnected power systems. The MRC controller is using the NN for training, as well as for plant identification. The proposed NN-based MRC controller is capable of damping power oscillations; hence, the system acquires a stable condition. The response of the proposed MRC is compared with the traditionally used proportional integral (PI) controller to validate its performance. The key performance indicator integral square error (ISE) and integral absolute error (IAE) of both controllers is calculated for single phase, two phase, and three phase faults. MATLAB/Simulink is used to implement and simulate the 2-area, 4-machine power system.

APA, Harvard, Vancouver, ISO, and other styles

8

DOMÍNGUEZ-GARCÍA, J. L., O. GOMIS-BELLMUNT, F. BIANCHI, and A. SUMPER. "PSS CONTROLLER FOR WIND POWER GENERATION SYSTEMS." International Journal of Modern Physics B 26, no. 25 (September 10, 2012): 1246012. http://dx.doi.org/10.1142/s0217979212460125.

Full text

Abstract:

Small signal stability analysis for power systems with wind farm interaction is presented. Power systems oscillation modes can be excited by disturbance or fault in the grid. Variable speed wind turbines can be regulated to reduce these oscillations, stabilising the power system. A power system stabiliser (PSS) control loop for wind power is designed in order to increase the damping of the oscillation modes. The proposed power system stabiliser controller is evaluated by small signal analysis.

APA, Harvard, Vancouver, ISO, and other styles

9

Arzeha, Nurul Aziah, Mohd Wazir Mustafa, and Rasyidah Mohamad Idris. "Damping Low Frequency Oscillations via FACTS-POD Controllers Tuned by Bees Algorithm." ELEKTRIKA- Journal of Electrical Engineering 17, no. 2 (August 29, 2018): 6–14. http://dx.doi.org/10.11113/elektrika.v17n2.62.

Full text

Abstract:

Power systems are often subject to low frequency electro-mechanical oscillations resulting from electrical disturbances and consequence of the development of interconnection of large power system. Flexible Alternating Current Transmission System (FACTS) devices with Power Oscillation Damping (POD) as the supplemet controller has been recent research interest in damping the oscillation. Bees Algorithm (BA) is applied to optimized the parameters of the FACTS-POD controller. The main objective of optimization is to improve the system stability by moving the electro-mechanical eigenvalues on the s-plane to the left as far as possible. The controller is tested on a 3-machine 9-bus system and simulated in PSAT in MATLAB environment. The system is disturbed by increasing 10% mechanical input to Generator 2 and second disturbance is the system experiencing a three-phase fault. The performance of the system with the FACTS-POD controller is observed in terms of position of electromechanical eigenvalues on s-plane and damping responses of power oscillations where both terms shows significant improvement as compared to the system without FACTS-POD controller.

APA, Harvard, Vancouver, ISO, and other styles

10

Alshuaibi, Khaled, Yi Zhao, Lin Zhu, Evangelos Farantatos, Deepak Ramasubramanian, Wenpeng Yu, and Yilu Liu. "Forced Oscillation Grid Vulnerability Analysis and Mitigation Using Inverter-Based Resources: Texas Grid Case Study." Energies 15, no. 8 (April 12, 2022): 2819. http://dx.doi.org/10.3390/en15082819.

Full text

Abstract:

Forced oscillation events have become a challenging problem with the increasing penetration of renewable and other inverter-based resources (IBRs), especially when the forced oscillation frequency coincides with the dominant natural oscillation frequency. A severe forced oscillation event can deteriorate power system dynamic stability, damage equipment, and limit power transfer capability. This paper proposes a two-dimension scanning forced oscillation grid vulnerability analysis method to identify areas/zones in the system that are critical to forced oscillation. These critical areas/zones can be further considered as effective actuator locations for the deployment of forced oscillation damping controllers. Additionally, active power modulation control through IBRs is also proposed to reduce the forced oscillation impact on the entire grid. The proposed methods are demonstrated through a case study on a synthetic Texas power system model. The simulation results demonstrate that the critical areas/zones of forced oscillation are related to the areas that highly participate in the natural oscillations and the proposed oscillation damping controller through IBRs can effectively reduce the forced oscillation impact in the entire system.

APA, Harvard, Vancouver, ISO, and other styles

11

Simon, Likin, Jayashri Ravishankar, and K. Shanti Swarup. "Coordinated reactive power and crow bar control for DFIG-based wind turbines for power oscillation damping." Wind Engineering 43, no. 2 (July 13, 2018): 95–113. http://dx.doi.org/10.1177/0309524x18780385.

Full text

Abstract:

The fault ride through capability and fast controller action makes doubly fed induction generator based wind energy conversion system to actively participate in power oscillation damping. This article describes a coordinated reactive power control from grid side converter along with active crowbar scheme for doubly fed induction generator which can actively participate in power oscillation damping, and thus improve the transient stability margin of entire power system. For a reactive power oscillation damping ( [Formula: see text] power oscillation damping), it is essential that the phase of the modulated output is tightly controlled to achieve a positive damping. Detailed 3 generator 9 bus Western System Coordinating Council system is modeled in PSCAD/EMTDC with the generator dynamics. The dynamics in power flows generator rotor speeds and voltages are analyzed followed by a three-phase fault in the power system. A set of comprehensive case studies are performed to verify the proposed control scheme.

APA, Harvard, Vancouver, ISO, and other styles

12

Liu, Qi, Jiahui Wu, Haiyun Wang, Hua Zhang, and Jian Yang. "Analysis of DFIG Interval Oscillation Based on Second-Order Sliding Film Damping Control." Energies 16, no. 7 (March 28, 2023): 3091. http://dx.doi.org/10.3390/en16073091.

Full text

Abstract:

This paper takes advantage of the high control flexibility and fast response time of the interfacing power electronic converter for doubly fed wind turbine grid-connected systems to address inter-area oscillations caused by inadequate system damping in power systems. A reactive-power-coordinated damping controller for a doubly fed induction generator (DFIG) is proposed, and it makes use of second-order sliding-mode technology. The suggested controller improves damping performance by controlling the reactive power. It provides benefits such as a quicker damping rate and resilience to modeling errors and parameter changes. The simulation results indicate the system’s improved performance in inter-area oscillation damping and the robustness of the suggested control technique over a broad range of functional areas.

APA, Harvard, Vancouver, ISO, and other styles

13

Ghodsi, Mohammad Reza, Alireza Tavakoli, and Amin Samanfar. "Microgrid Stability Improvement Using a Deep Neural Network Controller Based VSG." International Transactions on Electrical Energy Systems 2022 (August 31, 2022): 1–17. http://dx.doi.org/10.1155/2022/7539173.

Full text

Abstract:

In order to support the inertia of a microgrid, virtual synchronous generator control is a suitable control method. However, the use of the virtual synchronous generator control leads to unacceptable transient active power sharing, active power oscillations, and the inverter output power oscillation in the event of a disturbance. This study aims to propose a deep neural network controller which combines the features of a restricted Boltzmann machine and a multilayer neural network. To initialize a multilayer neural network in the unsupervised pretraining method, the restricted Boltzmann machine is applied as a very important part of the deep learning controller. The Lyapunov stability method is used to update the weight of the deep neural network controller. The proposed method performs power oscillation damping and frequency stabilization. The experimental and simulation results are presented to assess the usefulness of the suggested method in damping oscillations and frequency stabilization.

APA, Harvard, Vancouver, ISO, and other styles

14

Arzeha, Nurul Aziah, Mohd Wazir Mustafa, and Rasyidah Mohamed Idris. "Lead Lag Controller of TCSC Optimized by Bees Algorithm for Damping Low Frequency Oscillation Enhancement in SMIB." Applied Mechanics and Materials 781 (August 2015): 374–78. http://dx.doi.org/10.4028/www.scientific.net/amm.781.374.

Full text

Abstract:

Power system is often vulnerable to low frequency electromechanical oscillations due to the interconnected configuration. A common lead-lag controller is used for one of the FACTS devices known as Thyristor Controlled Series Compensator (TCSC) as supplementary controller for damping purpose in order to improve transient stability and power oscillation damping of the system. As Bees Algorithm (BA) optimized the parameters of the TCSC lead-lag controller, thus its named is TCSC-BALL. In this study, the optimization problem is formulated as a constrained optimization with the main objective is to move the system eigenvalues to the left as far as possible in order to improve the system stability. Then, the system is simulated in MATLAB by using The Phillips-Heffron model for single machine infinite bus (SMIB) with responses of increases in mechanical power at t=1 second. The performance is observed in terms of electromechanical eigenvalues position on s-plane and damping responses of low-frequency oscillations where the system implemented with the TCSC-BALL controller given better results as compared to the system without and with the inclusion of conventional Power System Stabilizer (CPSS).

APA, Harvard, Vancouver, ISO, and other styles

15

Nahak, Narayan, and Samarjeet Satapathy. "A Coordinated Pumped Storage Dual Compensated Hydro Governor with PSS Action to Damp Electromechanical Power Oscillations." International Transactions on Electrical Energy Systems 2022 (October 19, 2022): 1–24. http://dx.doi.org/10.1155/2022/8802143.

Full text

Abstract:

Subject to increasing penetrations of renewable sources like solar photovoltaic (SPV) and wind energy sources, power system oscillation damping is going to be a critical challenge for system operators. This work proposes a new dual compensated governor (DCG) in coordination with a power system stabilizer (PSS) of a pumped storage hydro plant for power oscillation damping subject to intermittent SPV and wind penetration for a hydro, wind, and SPV integrated power system. The phase lag provided by the hydro governor is compensated by additional phase lead contributed by the dual compensation, where speed and real power deviations brought by uncertain SPV and wind penetrations are simultaneously controlled by two lead-lag controllers before being applied to conventional Proportional-Integral-Derivative (PID) governor. Again, subject to critical oscillatory unstable conditions, the DCG is coordinated with PSS through a multiobjective function employing a new modified Differential Evolutionary-Particle swarm optimization (MDEPSO) algorithm. Different case studies with sudden and random SPV and wind penetrations being executed with the proposed controller considering a two area four machine and 39 bus multimachine system with pumped storage hydro units to observe system oscillations are considered. The proposed damping control action has been implemented to damp these oscillations, and the damped response has been analyzed with eigenvalue distributions and Bode plots with sensitivity analysis. The proposed action is found to be much more efficient in contrast to conventional PID governor and PSS damping action. Also, the usage of present hydro governors can be much improved by this coordinated controller action.

APA, Harvard, Vancouver, ISO, and other styles

16

Hussain, Ali Nasser, F. Malek, Mohd Abdur Rashid, Latifah Mohamed, and Ismail Daut. "UPFC Device Application on Power System Oscillations to Improve the Damping Performance." Advanced Materials Research 694-697 (May 2013): 830–37. http://dx.doi.org/10.4028/www.scientific.net/amr.694-697.830.

Full text

Abstract:

UPFC is considered as an important modern device in the flexible ac transmission systems family that provides the controllability and flexibility for transmission lines. It is also capable of enhancing the stability of the power system by the addition of a supplementary damping controller, which can be installed on any control channel of the UPFC inputs to implement the task of power oscillation damping controller. This paper presents the application of UPFC to enhance damping of low frequency oscillations by the simultaneous coordinated design between power system stabilizer and different UPFC supplementary damping controller in order to identify the design that provided the most robust damping performance in a single machine infinite bus. The parameters of the damping controller were tuned in the individual and coordinated design by using a chaotic particle swarm optimization algorithm that optimized the given eigenvalue-based objective function. The results analysis reveals that the proposed coordinated designs have high ability in damping Low-frequency oscillations and improve the system damping over their individual control responses. In addition, the coordinated design PSS & δE provides superior performance in comparison to the all coordinated designs.

APA, Harvard, Vancouver, ISO, and other styles

17

Al-Mawsawi, S. Ali Abbas, Anwer Haider, and S. Ahmed Al-gallaf. "Design of Robust UPFC Based Damping Controller Using Biogeography Based Optimization." Indonesian Journal of Electrical Engineering and Computer Science 2, no. 3 (June 1, 2016): 554. http://dx.doi.org/10.11591/ijeecs.v2.i3.pp554-565.

Full text

Abstract:

In this paper a new optimization algorithm, the biogeography based optimization (BBO) is employed to design a robust power oscillation damping (POD) controller using unified power flow controller (UPFC). The controller that is used to damp low frequency oscillation is designed over a wide range of operating points using two different objective functions. The obtained controllers are then verified through time-domain simulation over different loading conditions with different system uncertainties introduced.

APA, Harvard, Vancouver, ISO, and other styles

18

Narasimha Rao, D., and V. Saritha. "Power System Oscillation Damping Using New Facts Device." International Journal of Electrical and Computer Engineering (IJECE) 5, no. 2 (April 1, 2015): 198. http://dx.doi.org/10.11591/ijece.v5i2.pp198-204.

Full text

Abstract:

This paper presents about improving stability of the system which can be possible with new FACTS device with more convenient. FACTS devices come under the influence of power electronics equipment. Distributed Power Flow Controller is a FACTS device used for damping low frequency oscillation with new controlling approach. It is valid for a wide range of the operating condition. In this work explain the basic model and its steady state operation, mathematical analysis injection of current control model of the DPFC. Using damping controller used in DPFC facts device as input to implement the task of power oscillation damping .Here this work had a brief study on damping, terminal voltage and excitation voltage at different load conditions, simulation results demonstrate damping low frequency oscillation at nominal, light and heavy loading conditions

APA, Harvard, Vancouver, ISO, and other styles

19

Hasanvand, Hamed, and Mohammad Reza Zamani. "Robust control of static Var compensator-based power oscillation dampers using polynomial control in power systems." Transactions of the Institute of Measurement and Control 40, no. 5 (January 24, 2017): 1395–406. http://dx.doi.org/10.1177/0142331216683774.

Full text

Abstract:

A static Var compensator (SVC) installed in a power transmission network can be effectively exploited to enhance the damping of low frequency electromechanical oscillations. The application of robust control theory offers more reliable and robust damping controller to achieve desired damping level considering variations in the operating conditions of power system. This paper presents a new approach to design a robust proportional-integral (PI) controller for stabilizing power system oscillations. The variability in operating conditions is captured using an interval polynomial and then, Kharitonov’s theorem is used to design the desired damping controller. The proposed method is based on plotting the stability boundary locus in the ( kp-ki) plane and then computing the stabilizing values of the parameters of a PI controller. Besides stabilization, computation of stabilizing PI controllers that achieve user specified gain margin (Gm), phase margin (Pm) and bandwidth is studied simultaneously. This novel method enables designers to make the convenient trade-off between stability and performance by choosing the proper margins and bandwidth specifications. In addition, the most appropriate stabilizing input signal is selected using Hankel singular value (HSV) and right half plane-zeros (RHP-zeros) for the SVC-based supplementary damping controller. The effectiveness and robustness of the proposed controller are demonstrated using eigenvalue analysis and time-domain simulation for a 16 machine 68-bus test system. The simulations and analysis are implemented in matrix laboratory environment and power system analysis toolbox.

APA, Harvard, Vancouver, ISO, and other styles

20

Li, Jin, Ya Min Pi, and Hui Yuan Yang. "Study on Improving Power System Damping by Using DPFC." Advanced Materials Research 986-987 (July 2014): 1286–90. http://dx.doi.org/10.4028/www.scientific.net/amr.986-987.1286.

Full text

Abstract:

In this paper, the series converters of Distributed Power Flow Controller are the main object of study. Its mechanism of suppressing power system oscillations is studied by theoretical analysis and formula derivation, which relies on a single-machine infinite-bus power system, installed the series converters. Then based on the mechanism, adopting the classic PI control and the damping controller, designed the transient stability control loop for the series converters. Finally, simulations performed by PSCAD/EMTDC, the results show that DPFC device can effectively suppress oscillation and improve system stability.

APA, Harvard, Vancouver, ISO, and other styles

21

He, Ping, Seyed Arefifar, Congshan Li, Fushuan Wen, Yuqi Ji, and Yukun Tao. "Enhancing Oscillation Damping in an Interconnected Power System with Integrated Wind Farms Using Unified Power Flow Controller." Energies 12, no. 2 (January 21, 2019): 322. http://dx.doi.org/10.3390/en12020322.

Full text

Abstract:

The well-developed unified power flow controller (UPFC) has demonstrated its capability in providing voltage support and improving power system stability. The objective of this paper is to demonstrate the capability of the UPFC in mitigating oscillations in a wind farm integrated power system by employing eigenvalue analysis and dynamic time-domain simulation approaches. For this purpose, a power oscillation damping controller (PODC) of the UPFC is designed for damping oscillations caused by disturbances in a given interconnected power system, including the change in tie-line power, the changes of wind power outputs, and others. Simulations are carried out for two sample power systems, i.e., a four-machine system and an eight-machine system, for demonstration. Numerous eigenvalue analysis and dynamic time-domain simulation results confirm that the UPFC equipped with the designed PODC can effectively suppress oscillations of power systems under various disturbance scenarios.

APA, Harvard, Vancouver, ISO, and other styles

22

Cai, Guowei, Xiangsong Chen, Zhenglong Sun, Deyou Yang, Cheng Liu, and Haobo Li. "A Coordinated Dual-Channel Wide Area Damping Control Strategy for a Doubly-Fed Induction Generator Used for Suppressing Inter-Area Oscillation." Applied Sciences 9, no. 11 (June 8, 2019): 2353. http://dx.doi.org/10.3390/app9112353.

Full text

Abstract:

Using a doubly-fed induction generator (DFIG), with an additional active or reactive damping controller, is a new method of suppressing the inter-area oscillation of a power system. However, using active power modulation (APM) may decrease the damping of the shaft oscillation mode of a DFIG and the system damping target cannot be achieved through reactive power modulation (RPM) in some cases. Either single APM or RPM does not consider system damping and torsional damping simultaneously. In this paper, an active-reactive coordinated dual-channel power modulation (DCPM) damping controller is proposed for DFIGs. First, considering the electromechanical parts and control structure of the wind turbine, an electromechanical transient model and an additional damping controller model of DFIGs are established. Then, the dynamic objective function for coordinating the parameters of the additional damping controller is proposed. The ratio between the active power channel and reactive power channel modulation is derived from the parameters optimized by the particle swarm optimization algorithm. Finally, the effectiveness and practicability of the designed strategy is verified by comparing it with a traditional, simple damping controller design strategy. Standard simulation system examples are used in the comparison. Results show that the DCPM is better at maximizing the damping control capability of the rotor-side controller of a DFIG and simultaneously minimizing adverse effects on torsional damping than the traditional strategy.

APA, Harvard, Vancouver, ISO, and other styles

23

Gholizadeh-Roshanagh, Reza, Behrouz Mohammadzadeh, and Sajad Najafi-Ravadanegh. "Optimal Siting of UPFC on a Transmission Line with the Aim of Better Damping of Low Frequency Oscillations." ECTI Transactions on Electrical Engineering, Electronics, and Communications 14, no. 1 (June 27, 2015): 56–64. http://dx.doi.org/10.37936/ecti-eec.2016141.171096.

Full text

Abstract:

Low frequency oscillations may cause blackouts. Power system operators are increasingly facing instability problems due to the fact that the current system is much more loaded than before. Tuning the lead-lag controllers, as power system stabilizers (PSS) or FACTS-based supplementary stabilizers, is a well-established method to enhance the damping capability of power systems. In this paper we propose a technique to optimally locate the place of unified power flow controller (UPFC) on a transmission line considering low frequency oscillation (LFO) damping. The proposed method is applied to a single machine infinite bus system equipped with UPFC and the results obtained show its superiority.

APA, Harvard, Vancouver, ISO, and other styles

24

Mathad, Vireshkumar, and Gururaj Kulkarni. "Artificial-neural-network based unified power flow controller for mitigation of power oscillations." Indonesian Journal of Electrical Engineering and Computer Science 24, no. 3 (December 1, 2021): 1323. http://dx.doi.org/10.11591/ijeecs.v24.i3.pp1323-1331.

Full text

Abstract:

The series and shunt control scheme of unified power flow controller (UPFC) impacts the performance and stability of the power system during power swing. UPFC is the most versatile and voltage source converter device as it can control the real and reactive power of the transmission system simultaneously or selectively. When any system is subjected to any disturbance or fault, there are many challenges in damping power oscillation using conventional methods. This paper presents the neural network-based controller that replaces the proportional-integral (PI) controller to minimize the power oscillations. The performance of the artificial neural network (ANN) controller is evaluated on IEEE 9 bus system and compared with a conventional PI controller.

APA, Harvard, Vancouver, ISO, and other styles

25

Rout, Bidyadhar, B. B. Pati, and S. Panda. "Modified SCA algorithm for SSSC damping Controller design in Power System." ECTI Transactions on Electrical Engineering, Electronics, and Communications 16, no. 1 (November 27, 2017): 46–63. http://dx.doi.org/10.37936/ecti-eec.2018161.171326.

Full text

Abstract:

This paper studies the improvement of transient stability of a single-Machine Infinite-Bus (SMIB) power system using Proportional Derivative (PD) type Static Synchronous Series Compensator (SSSC) and damping controllers. The design problem has been considered as optimisation problem and a modified version of recently proposed Sine Cosine Algorithm (SCA) has been employed for determining the optimal controller parameters. Proposed modified SCA (mSCA) algorithm is first tested using bench mark test functions and compared with SCA, and other heuristic evolutionary optimization algorithms like Grey Wolf optimization (GWO), Particle Swarm optimization (PSO), Gravitational Search algorithm (GSA) and Differential Evolution algorithm to show its superiority. The proposed mSCA algorithm is then applied to optimize simultaneously the PD type lead lag controller parameters pertaining to SSSC and power system stabilizer(PSS). The proposed controller provides sufficient damping for power system oscillation in different operating conditions and disturbances. Results analysis reveal that proposed mSCA technique provides higher effectiveness and robustness in damping oscillations of the power system and increases the dynamic stability more.

APA, Harvard, Vancouver, ISO, and other styles

26

Islam, Naz Niamul, M. A. Hannan, Hussein Shareef, and Azah Mohamad. "Bijective Differential Search Algorithm for Robust Design of Damping Controller in Multimachine Power System." Applied Mechanics and Materials 785 (August 2015): 424–28. http://dx.doi.org/10.4028/www.scientific.net/amm.785.424.

Full text

Abstract:

Low frequency oscillation (LFO) is a serious threat to the interconnection of power system and its safe operation. In this paper, optimum damping performances over LFO is achieved by implementing Bijective Differential Search Algorithm (B-DSA) to large interconnected power system. Conventional two stages lead-lag compensator is optimized as the Power System Stabilizer (PSS) and Linear Time Invariant (LTI) State Space system models are used to conduct stability analysis of power system. The tuning problem of PSS in multimachine system was formulated as a multi-objectives function. The simulations are conducted in 5-AREA 16 Machine test power system for severe system fault in order to verify the robust design of damping controller. The obtained results are compared with standard DSA optimization technique. The findings show the improved damping achieved by B-DSA than DSA algorithm. The settling times achieved using B-DSA based designed PSSs are 3.74sec and 4.57sec for local mode and inter-area mode of oscillations respectively. The successful damping over oscillation modes of LFO justifies the proposed technique is efficient for the improvement of power system security in adverse condition.

APA, Harvard, Vancouver, ISO, and other styles

27

Aref, Mahmoud, Almoataz Y. Abdelaziz, Zong Woo Geem, Junhee Hong, and Farag K. Abo-Elyousr. "Oscillation Damping Neuro-Based Controllers Augmented Solar Energy Penetration Management of Power System Stability." Energies 16, no. 5 (March 2, 2023): 2391. http://dx.doi.org/10.3390/en16052391.

Full text

Abstract:

The appropriate design of the power oscillation damping controllers guarantees that distributed energy resources and sustainable smart grids deliver excellent service subjected to big data for planned maintenance of renewable energy. Therefore, the main target of this study is to suppress the low-frequency oscillations due to disruptive faults and heavy load disturbance conditions. The considered power system comprises two interconnected hydroelectric areas with heavy solar energy penetrations, severely impacting the power system stabilizers. When associated with appropriate controllers, FACTs technology such as the static synchronous series compensator provides efficient dampening of the adverse power frequency oscillations. First, a two-area power system with heavy solar energy penetration is implemented. Second, two neuro-based controllers are developed. The first controller is constructed with an optimized particle swarm optimization (PSO) based neural network, while the second is created with the adaptive neuro-fuzzy. An energy management approach is developed to lessen the risky impact of the injected solar energy upon the rotor speed deviations of the synchronous generator. The obtained results are impartially compared with a lead-lag compensator. The obtained results demonstrate that the developed PSO-based neural network controller outperforms the other controllers in terms of execution time and the system performance indices. Solar energy penetrations temporarily influence the electrical power produced by the synchronous generators, which slow down for uncomfortably lengthy intervals for solar energy injection greater than 0.5 pu.

APA, Harvard, Vancouver, ISO, and other styles

28

Farzam, Vahid, and Ahad Mokhtarpour. "Inter-Area Oscillation Damping Using an STATCOM based Hybrid Shunt compensation Scheme." International Journal of Power Electronics and Drive Systems (IJPEDS) 7, no. 4 (December 1, 2016): 1172. http://dx.doi.org/10.11591/ijpeds.v7.i4.pp1172-1180.

Full text

Abstract:

FACTS devices are one of the latest technologies which have been used to improve power system dynamic and stability during recent years. However, widespread adoption of this technology has been hampered by high cost and reliability concerns. In this paper an economical phase imbalanced shunt reactive compensation concept has been introduced and its ability for power system dynamic enhancement and inter-area oscillation damping are investigated. A hybrid phase imbalanced scheme is a shunt capacitive compensation scheme, where two phases are compensated by fixed shunt capacitor (C) and the third phase is compensated by a Static Synchronous Compensator (STATCOM) in shunt with a fixed capacitor (CC). The power system dynamic stability enhancement would be achieved by adding a conventional Wide Area Damping Controller (WADC) to the main control loop of the single phase STATCOM. Two different control methodologies are proposed: a non-optimized conventional damping controller and a conventional damping controller with optomised parameters that are added to the main control loop of the unbalanced compensator in order to damp the inter area oscillations. The proposed arrangement would, certainly, be economically attractive when compared with a full three-phase STATCOM. The proposed scheme is prosperously applied in a 13-bus six-machine test system and various case studies are conducted to demonstrate its ability in damping inter-area oscillations and power system dynamic enhancement.

APA, Harvard, Vancouver, ISO, and other styles

29

Safari, Amin. "Robust Coordinated Designing of PSS and UPFC Damping Controller." Bulletin of Electrical Engineering and Informatics 2, no. 3 (September 1, 2013): 194–203. http://dx.doi.org/10.11591/eei.v2i3.204.

Full text

Abstract:

This paper presents the simultaneous coordinated designing of the UPFC robust power oscillation damping controller and the conventional power system stabilizer. On the basis of the linearized Phillips-Herffron model, the coordinated design problem of PSS and UPFC damping controllers over a wide range of loading conditions and system configurations is formulated as an optimization problem with the eigenvalue-based multiobjective function which is solved by a particle swarm optimization algorithm (PSO) that has a strong ability to find the most optimistic results. The stabilizers are tuned to simultaneously shift the undamped electromechanical modes to a prescribed zone in the s-plane. To ensure the robustness of the proposed simultaneous coordinated controllers tuning, the design process takes into account a wide range of operating conditions and system configurations. The effectiveness of the proposed method is demonstrated through eigenvalue analysis, nonlinear time-domain simulation and some performance indices studies under various disturbance conditions of over a wide range of loading conditions. The results of these studies show that the PSO based simultaneous coordinated controller has an excellent capability in damping power system oscillations and enhance greatly the dynamic stability of the power system.

APA, Harvard, Vancouver, ISO, and other styles

30

Sangeetha, J., and P. Renuga. "Recurrent ANFIS-Coordinated Controller Design for Multimachine Power System with FACTS Devices." Journal of Circuits, Systems and Computers 26, no. 02 (November 3, 2016): 1750034. http://dx.doi.org/10.1142/s0218126617500347.

Full text

Abstract:

This paper proposes the design of auxiliary-coordinated controller for static VAR compensator (SVC) and thyristor-controlled series capacitor (TCSC) devices by adaptive fuzzy optimized technique for oscillation damping in multimachine power systems. The performance of the coordinated control of SVC and TCSC devices based on feedforward adaptive neuro fuzzy inference system (F-ANFIS) is compared with that of the adaptive neuro fuzzy inference system (ANFIS) structure based on recurrent adaptive neuro fuzzy inference system (R-ANFIS) network architecture. The objective of the coordinated controller design is to tune the parameters of SVC and TCSC fuzzy lead lag compensator simultaneously to minimize the deviation of rotor angle and rotor speed of the generators. The performance of the system is enhanced by optimally tuning the membership functions of fuzzy lead lag controller parameter of the flexible AC transmission system (FACTS) by R-ANFIS controller. The training data for F-ANFIS and R-ANFIS are generated by conventional linear control technique under various operating conditions. The offline trained controller tunes the parameter of lead lag controller in online. The oscillation damping ability of the system is analyzed for three-machine test system by calculating the standard deviation and cost function. The superior performance of R-ANFIS controller is compared with various particle swarm optimization-based feedforward ANFIS controllers available in literature.

APA, Harvard, Vancouver, ISO, and other styles

31

Somsai, Kittaya, Nakarin Sripanya, and Chaiyut Sumpavakup. "Power oscillation damping control using PI-neuron network controller for distributed generator grid connection with MVDC." International Journal of Power Electronics and Drive Systems (IJPEDS) 13, no. 4 (December 1, 2022): 2541. http://dx.doi.org/10.11591/ijpeds.v13.i4.pp2541-2554.

Full text

Abstract:

Distributed generator (DG) connection to the system with the DC grid called medium voltage direct current (MVDC) grid connection has received attention and gradually integrated into the distribution grid. The linear controller, such as the PI controller, usually uses the MVDC grid control for power oscillation damping. The PI controller is limited and does not show satisfactory results when the load and parameters of the system itself are changed. This paper proposes the PI with neuron network (NN) as a feed-forward controller (PINNF) to improve the control of the DG grid connection with the MVDC. The proposed PINNF controller is applied to control the power oscillation damping. Since the NN can estimate the proper feed-forward control signals in each situation to the control system, the proposed PINNF controller performs better than the conventional PI controller. The effectiveness of the proposed PINNF controller is validated using nonlinear dynamic simulations on the MATLAB/Simulink program. Four case tests are presented and discussed in this paper. Results indicate the improvement of power oscillation damping stability and performance in the MVDC grid connection with the proposed PINNF controller.

APA, Harvard, Vancouver, ISO, and other styles

32

Miao, Xiao Gang, Bu Han Zhang, Zhong Cheng Li, Jun Li Wu, Cheng Xiong Mao, Xiao Ping Li, Jian Bo Sun, Miao Li, and Da Hu Li. "Coordinative Optimal Design for PSS and Auxiliary Damping Controller on SVC under Multi-Operating Conditions." Advanced Materials Research 732-733 (August 2013): 823–29. http://dx.doi.org/10.4028/www.scientific.net/amr.732-733.823.

Full text

Abstract:

Based on power system stabilizer (PSS) and the damping controller of flexible AC transmission system (FACTS),a problem of optimal design is researched by the example of static var compensator (SVC). Minimum damp ratio of system electromechanical oscillation modes eigenvalue in the weak damping operation condition is selected as the object function. Parameters of damping controllers are optimized by the algorithm which is combined by genetic algorithm (GA) and back propagation (BP) neural network based on adaboost (Ada-BP). Simulation shows the optimized damping controllers can restrain the low frequency oscillation in multi-operating conditions of system. The algorithm provides an effective solution for optimization calculations which calls the complicated calculations.

APA, Harvard, Vancouver, ISO, and other styles

33

Manuaba, Ida Bagus Gede, Putu Arya Mertasana, Made Mataram, and Cok Gede Indra Partha. "Improving Performance Stability of Power System Java-Bali Interconnection with PIDPSS3B and PIDSVC Controllers." Journal of Electrical, Electronics and Informatics 1, no. 1 (February 3, 2017): 17. http://dx.doi.org/10.24843/jeei.2017.v01.i01.p04.

Full text

Abstract:

Modern electric power system that many its dynamic equipment continuously vulnerable to internal and external disturbances. On the condition of the disorder, it often happen oscillation in each part or between parts of the electrical system is interconnected. These oscillations become a major problem for the stability of the power system. Modern electrical control systems require a sustainable balance between power generation and demand varying loads. Power System Stabilizer and Static Var Compensator is a control device that is used to dampen low frequency oscillations and to provide additional feedback signal to stabilize the system. To increase the damping, system equipped with PSS generator that provides additional feedback to stabilize the signal in the excitation system. It is generally that the machine parameters changed by the load, so the dynamic behavior of the different machines at different operating conditions. Design PIDPSS3B power system stabilizer and PIDSVC controller used aim to get performance and optimum damping. Design and optimization of the proposed has the ability to optimally dampen and suppress errors are minimal.

APA, Harvard, Vancouver, ISO, and other styles

34

Oni, Oluwafemi E., Andrew G. Swanson, and Rudiren Pillay Carpanen. "Small signal stability analysis of a four-machine system with placement of multi-terminal high voltage direct current link." Journal of Energy in Southern Africa 31, no. 1 (March 10, 2020): 73–87. http://dx.doi.org/10.17159/2413-3051/2020/v31i1a7430.

Full text

Abstract:

Inter-area oscillation caused by weak interconnected lines or low generator inertia is a critical problem facing power systems. This study investigated the performance analysis of a multi-terminal high voltage direct current (MTDC) on the damping of inter-area oscillations of a modified two-area four-machine network. Two case studies were considered, utilising scenario 1: a double alternating current (AC) circuit in linking Bus_10 and Bus_11; and scenario 2: a three-terminal line commutated converter high voltage direct current system in linking Bus_6 and Bus_11 into Bus_9. It was found that scenario 2 utilising MTDC link with a robust controller provided quick support in minimising the network oscillations following a fault on the system. The MTDC converter controllers’ setup offered sufficient support for the inertia of the AC system, thus providing efficient damping of the inter-area oscillation of the system.

APA, Harvard, Vancouver, ISO, and other styles

35

Luo, Ke, and Hai Ying Yu. "Damping Controller Based on Output Prediction Observer and LMI Method." Advanced Materials Research 219-220 (March 2011): 1371–74. http://dx.doi.org/10.4028/www.scientific.net/amr.219-220.1371.

Full text

Abstract:

To damp the inter-area low-frequency oscillation in power systems, a wide-area damping supplementary inter-area controller, based on output prediction observer and LMI method, was designed in this paper. Simulation results of a test system show that the wide-area damping controller can well damp inter-area low-frequency oscillation, and is insensitive to time-delay to some degree.

APA, Harvard, Vancouver, ISO, and other styles

36

Pandey, Rajendra K., and Deepak Kumar Gupta. "Integrated multi-stage LQR power oscillation damping FACTS controller." CSEE Journal of Power and Energy Systems 4, no. 1 (March 15, 2018): 83–91. http://dx.doi.org/10.17775/cseejpes.2016.00510.

Full text

APA, Harvard, Vancouver, ISO, and other styles

37

Surinkaew, Tossaporn, Rakibuzzaman Shah, Mithulananthan Nadarajah, and S. M. Muyeen. "Forced oscillation damping controller for an interconnected power system." IET Generation, Transmission & Distribution 14, no. 2 (January 31, 2020): 339–47. http://dx.doi.org/10.1049/iet-gtd.2019.1115.

Full text

APA, Harvard, Vancouver, ISO, and other styles

38

Neda, Omar Muhammed. "Optimal coordinated design of PSS and UPFC-POD using DEO algorithm to enhance damping performance." International Journal of Electrical and Computer Engineering (IJECE) 10, no. 6 (December 1, 2020): 6111. http://dx.doi.org/10.11591/ijece.v10i6.pp6111-6121.

Full text

Abstract:

Low-frequency oscillations (LFO) are an inevitable problem of power systems and they have a great effect on the capability of transfer and power system stability. The power system stabilizers (PSSs) as well as flexible AC transmission system (FACTS) devices can help to damp LFO. The target of this study is to tackle the problem of a dual-coordinated design between PSS and unified power flow controller (UPFC) implementing the task of power oscillation damping (POD) controller in a single machine infinite bus (SMIB) system. So, dolphin echolocation optimization (DEO) technique is utilized as an optimization tool to search for optimal parameter tunings based on objective function for enhancing the dynamic stability performance for a SMIB. DEO an algorithm has a few parameters, simple rules, provides the optimum result and is applicable to a wide range of problems like other meta-heuristic algorithms. Use DEO gave the best results in damping LFO compared to particle swarm optimization (PSO) algorithm. From the comparison results between PSO and DEO, it was shown that DEO provides faster settling time, less overshoot, higher damping oscillations and greatly improves system stability. Also, the comparison results prove that the multiple stabilizers show supremacy over independent controllers in mitigationg LFO of a SMIB.

APA, Harvard, Vancouver, ISO, and other styles

39

Bayu, Endeshaw Solomon, Baseem Khan, Zaid M. Ali, Zuhair Muhammed Alaas, and Om Prakash Mahela. "Mitigation of Low-Frequency Oscillation in Power Systems through Optimal Design of Power System Stabilizer Employing ALO." Energies 15, no. 10 (May 22, 2022): 3809. http://dx.doi.org/10.3390/en15103809.

Full text

Abstract:

Low-frequency oscillations are an inevitable phenomenon of a power system. This paper proposes an Ant lion optimization approach to optimize the dual-input power system stabilizer (PSS2B) parameters to enhance the transfer capability of the 400 kV line in the North-West region of the Ethiopian electric network by the damping of low-frequency oscillation. Double-input Power system stabilizers (PSSs) are currently used in power systems to damp out low-frequency oscillations. The gained minimum damping ratio and eigenvalue results of the proposed Ant lion algorithm (ALO) approach are compared with the existing conventional system to get better efficiency at various loading conditions. Additionally, the proposed Ant lion optimization approach requires minimal time to estimate the key parameters of the power oscillation damper (POD). Consequently, the average time taken to optimally size the parameters of the PSS controller was 14.6 s, which is pretty small and indicates real-time implementation of an ALO developed model. The nonlinear equations that represent the system have been linearized and then placed in state-space form in order to study and analyze the dynamic performance of the system by damping out low-frequency oscillation problems. Finally, conventional fixed-gain PSS improves the maximum overshoot by 5.2% and settling time by 51.4%, but the proposed optimally sized PSS employed with the ALO method had improved the maximum overshoot by 16.86% and settling time by 78.7%.

APA, Harvard, Vancouver, ISO, and other styles

40

Wang, Yunling, Fang Liu, Xinwei Du, Bo Li, Yang Liu, and Libo Jiang. "Low-frequency oscillation suppression strategy considering dynamic power characteristics of energy storage system." IOP Conference Series: Earth and Environmental Science 983, no. 1 (February 1, 2022): 012028. http://dx.doi.org/10.1088/1755-1315/983/1/012028.

Full text

Abstract:

Abstract Aiming at the problem of low-frequency oscillation in the weak power grid, a low-frequency oscillation suppression strategy considering the dynamic power characteristics of the energy storage system (ESS) is proposed in this paper. Firstly, the principle of low-frequency oscillation in the power system is analyzed by using a single machine infinite bus system. Secondly, considering the dynamic characteristics of the ESS output active power, a controller for the ESS to suppress low-frequency oscillation is designed, which can provide positive damping for frequency oscillation of the power grid. Finally, the simulation analysis and experimental results of an actual weak grid are carried out to verify the effectiveness and feasibility of the proposed method. The results show that the suppression effect of the low-frequency oscillations is related to the ESS location in the weak power grid.

APA, Harvard, Vancouver, ISO, and other styles

41

Zhang, Jun, Akihiko Yokoyama, and Toshiro Ide. "Application of Interline Power Flow Controller (IPFC) to Power Oscillation Damping." IEEJ Transactions on Power and Energy 128, no. 10 (2008): 1252–58. http://dx.doi.org/10.1541/ieejpes.128.1252.

Full text

APA, Harvard, Vancouver, ISO, and other styles

42

Noh, Hyeokjin, Hwanhee Cho, Sungyun Choi, and Byongjun Lee. "Mitigating Subsynchronous Torsional Interaction Using Geometric Feature Extraction Method." Sustainability 14, no. 23 (December 2, 2022): 16110. http://dx.doi.org/10.3390/su142316110.

Full text

Abstract:

This paper proposes a method to mitigate subsynchronous torsional interaction detected during power system operation. This innovative method employs the delay reconstruction of the damping controller of a thyristor-controlled series compensator. This addresses the need to detect and manage stability and electromagnetic transients in power systems caused by the increasing use of fast-response power electronics. Previously, severe oscillation conditions could be avoided via analysis of the subsynchronous torsional interaction scenarios during the planning stage, enabling the suppression of oscillations. However, planning, modeling, and analysis for various scenarios becomes more difficult as the complexity of the power system increases, owing to the use of renewable energy and the incorporation of topology changes. Therefore, interest in measurement data-based real-time oscillation analysis has increased. The first step of the mitigation strategy proposed herein reconstructs nonlinear time-series data to detect subsynchronous torsional interaction in real time and generate alert signals. The second step of the strategy is that the controller mitigates oscillations by controlling the firing angle using the geometric feature extraction method. In this paper, the relaxation of the frequency oscillation in the subsynchronous region of about 22 Hz and about 18 Hz was verified through two simulation cases.

APA, Harvard, Vancouver, ISO, and other styles

43

Dubey, Brijesh Kumar, and N. K. Singh. "Design of POD controller using linear quadratic regulator tecniques for SMIB power system stability enhancement installed with UPFC." IAES International Journal of Robotics and Automation (IJRA) 8, no. 3 (September 1, 2019): 164. http://dx.doi.org/10.11591/ijra.v8i3.pp164-173.

Full text

Abstract:

In the field of the power system stability, this paper presents the current research status and developments. This paper presents a systematic approach for designing Power Oscillation Damping Controller (POD) based Linear Quadratic Regulator Techniques for SMIB power system stability installed with UPFC to damp out low frequency oscillations in a power system. The impacts of control strategy on power system single machine infinite bus installed with UPFC, without UPFC and with UPFC and POD controller at different operating conditions are discussed. The accuracy of the developed models is verified through comparing the study results with those obtained from detailed MATLAB programming.

APA, Harvard, Vancouver, ISO, and other styles

44

Feleke, Solomon, Raavi Satish, Balamurali Pydi, Degarege Anteneh, Almoataz Y. Abdelaziz, and Adel El-Shahat. "Damping of Frequency and Power System Oscillations with DFIG Wind Turbine and DE Optimization." Sustainability 15, no. 6 (March 7, 2023): 4751. http://dx.doi.org/10.3390/su15064751.

Full text

Abstract:

Wind power is one of the most promising renewable energy resources and could become a solution to contribute to the present energy and global warming crisis of the world. The commonly used doubly fed induction generator (DFIG) wind turbines have a general trend of increasing oscillation damping. Unless properly controlled, the high penetration of wind energy will increase the oscillation and affect the control and dynamic interaction of the interconnected generators. This paper discusses power oscillation damping control in the automatic generation control (AGC) of two-area power systems with DFIG wind turbines and Matlab code/Simulink interfacing optimization methods. The differential evolution (DE) optimization technique is used to obtain the controller gain parameters. In the optimization process, a step load perturbation (SLP) of 1% has been considered in Area 1 only, and the integral of time weighted absolute error (ITAE) cost function is used. Three different test studies have been examined on the same power system model with non-reheat turbine thermal power plants. In the first case, the power system model is simulated without a controller. In Case Study 2, the system is simulated with the presence of DFIG and without a controller. In Case Study 3, the system is simulated with a PID controller and DFIG. Most of the studies available in the literature do not optimize the appropriate wind penetrating speed gain parameters for the system and do not consider the ITAE as an objective function to reduce area control error. In this regard, the main contribution and result of this paper is—with the proposed PID+DFIG optimized DE—the ITAE objective function error value in the case study without a controller being 6.7865, which is reduced to 1.6008 in the case study with PID+DFIG-optimized DE. In addition, with the proposed controller methods, the dynamic system time responses such as rise time, settling time, overshoot, and undershoot are improved for system tie-line power, change in frequency, and system area controller error. Similarly, with the proposed controller, fast system convergence and fast system oscillation damping are achieved. Generally, it is inferred that the incorporation of DFIG wind turbines in both areas has appreciably improved the dynamic performance and system stability under consideration.

APA, Harvard, Vancouver, ISO, and other styles

45

Ebrahim, M. A., and H. S. Ramadan. "Interarea Power System Oscillations Damping via AI-based Referential Integrity Variable-Structure Control." International Journal of Emerging Electric Power Systems 17, no. 5 (October 1, 2016): 497–509. http://dx.doi.org/10.1515/ijeeps-2016-0147.

Full text

Abstract:

Abstract The design of power system stabilizer (PSS) is load-dependent and needs continuous adjustment at each operating condition. This paper aims at introducing a robust non-fragile PSS for interconnected power systems. The proposed controller has the capability of adaptively tuning online its rule-base through a variable-structure direct adaptive control algorithm in order to rigorously attain the desired objectives. The PSS controller acts on damping the electromechanical modes of oscillations not only through a wide range of operating conditions but also in presence of different disturbances. Using MATLABTM-Simulink, simulation results significantly verify that the proposed controller provides favorable performance and efficiently contributes towards enhancing the system dynamic behavior when applied to the four machines two-area power system that mimics the typical system behavior in actual operation. The interaction between the variable-structure adaptive fuzzy-based power system stabilizer (VS-AFPSS) and the existed typical ones inside the interconnected power systems has been explicitly discussed. Compared to other conventional controllers, VS-AFPSS enables better damping characteristics to both local and inter-area oscillation modes considering different operating conditions and sever disturbances.

APA, Harvard, Vancouver, ISO, and other styles

46

Han, Ki Sun, Moon Gyu Jeong, and Jeong Phil Lee. "Damping of Power System Oscillation using robust thyristor-controlled phase shifter controller." IJIREEICE 5, no. 5 (May 15, 2017): 1–10. http://dx.doi.org/10.17148/ijireeice.2017.5501.

Full text

APA, Harvard, Vancouver, ISO, and other styles

47

Sun, Miaoping, Yaosheng Guo, and Seyha Song. "The Delay-Dependent DOFC for Damping Inter-Area Low-Frequency Oscillations in an Interconnected Power System Considering Packet Loss of Wide-Area Signals." Energies 14, no. 18 (September 17, 2021): 5892. http://dx.doi.org/10.3390/en14185892.

Full text

Abstract:

In this paper, the inter-area low-frequency oscillations are restrained in the interconnected power system by making use of the delay-dependent wide-area dynamic output feedback controller (DOFC). Modal analysis is adopted to obtain the modes of inter-area oscillation to be controlled and the Schur truncation model reduction technique is represented to reduce the order of the power system. The augmented closed-loop system model, where the transmission delay and packet loss of wide-area signals are considered, is established. The sufficient conditions of exponentially mean-square stable are obtained according to Lyapunov’s stability theory. Finally, case studies are carried out on a two-area four-machine power system, where our proposed controller, a conventional controller, and the wide-area damping controller in the existing references are installed, respectively. The simulation results under different external disturbances, packet loss rates, and delays are presented to show the effectiveness and advantages of our proposed controller.

APA, Harvard, Vancouver, ISO, and other styles

48

Mohammed, Hashim Dhahir. "Power System Transient Stability Enhancement by Tuning of SSSC and PSS Parameters Using PSO Technique." Journal of University of Babylon for Engineering Sciences 26, no. 5 (March 8, 2018): 81–94. http://dx.doi.org/10.29196/jub.v26i5.870.

Full text

Abstract:

In this paper, the tuning design of SSSC and PSS was examined in increasing the damping of system oscillations and improve the stability of the power system during disturbances. The design problem of the SSSC controller and PSS is designed as problem of optimization and the technique uses (PSO) technique to find for optimal control parameters. By minimizing the objective function based on the speed deviation and time domain, which deliberately deviates at the oscillation angle of the alternator rotor to improve performance of transient stability of the system. The proposed controllers are tested on the system of weak bonding ability exposed to severe disturbance. Nonlinear simulation results are presented to demonstrate the proposed controller's effectiveness and its ability to give efficient damping. It is also noted that the proposed controllers of SSSC and PSS greatly improves the power system stability.

APA, Harvard, Vancouver, ISO, and other styles

49

Salehi, Moslem, and Ali Akbar Motie Birjandi. "Optimal Selection of UPFC Parameters and Input Controlling Signal for Damping Power System Oscillations." Indonesian Journal of Electrical Engineering and Computer Science 2, no. 1 (April 1, 2016): 61. http://dx.doi.org/10.11591/ijeecs.v2.i1.pp61-68.

Full text

Abstract:

Unified power flow controller (UPFC), as one of the most important FACTS devices, can be used to increase the damping of power system oscillation. The effect rate of this controller on increasing oscillation damping depends on the appropriate selection of input controlling signal, optimal selection of UPFC controlling parameters, and its proper position in power system. In this paper, the capability of different UPFC inputs is studied by utilizing singular value decomposition (SVD) method and the best UPFC input controlling signal is selected. Supplementary control parameters are also optimally selected by PSO algorithm. This method's accuracy is simulated on a single-machine system connected to infinite bus.

APA, Harvard, Vancouver, ISO, and other styles

50

Armansyah, Ferdi, Naoto Yorino, and Hiroshi Sasaki. "POWER SYSTEM OSCILLATION DAMPING CONTROL BY ROBUST SVC SUPPLEMENTARY CONTROLLER." IEEJ Transactions on Power and Energy 120, no. 8-9 (2000): 1054–60. http://dx.doi.org/10.1541/ieejpes1990.120.8-9_1054.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Journal articles on the topic 'Power Oscillation Damping Controller'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles