Relevant bibliographies by topics / Power Electronics and energy conversion

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Power Electronics and energy conversion'

Author: Grafiati
Published: 6 September 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Power Electronics and energy conversion.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Power Electronics and energy conversion"

1

Ramya, M. V., G. Ramya, V. Thiruburasundari, and N. Ramadevi. "Recent Trends in Power Electronics for Renewable energy Systems." March 2022 4, no. 1 (April 26, 2022): 57–64. http://dx.doi.org/10.36548/jeea.2022.1.006.

Full text
Abstract:
The complete world is focused on renewable power to reduce the global energy issue. Power electronic based energy conversion is being used extensively to improve the efficiency of the renewable energy conversion. It has a significant impact on the control and interface of renewable energy systems with both the network and stand-alone applications. As a result, increasing attention is being placed on the design and implementation of power converters. This study discusses the renewable energy systems (wind and solar) and the features of their energy conversion. The fundamental principles underlying their operations are discussed, as well as their recent technological advancements. It is a fact that power electronics is critical for interfacing and thus improving the system capacity.
APA, Harvard, Vancouver, ISO, and other styles
2

Ramya, M. V., G. Ramya, V. Thiruburasundari, and N. Ramadevi. "Recent Trends in Power Electronics for Renewable energy Systems." March 2022 4, no. 1 (April 26, 2022): 57–64. http://dx.doi.org/10.36548/jeea.2022.1.006.

Full text
Abstract:
The complete world is focused on renewable power to reduce the global energy issue. Power electronic based energy conversion is being used extensively to improve the efficiency of the renewable energy conversion. It has a significant impact on the control and interface of renewable energy systems with both the network and stand-alone applications. As a result, increasing attention is being placed on the design and implementation of power converters. This study discusses the renewable energy systems (wind and solar) and the features of their energy conversion. The fundamental principles underlying their operations are discussed, as well as their recent technological advancements. It is a fact that power electronics is critical for interfacing and thus improving the system capacity.
APA, Harvard, Vancouver, ISO, and other styles
3

Ramya, M. V., G. Ramya, V. Thiruburasundari, and N. Ramadevi. "Recent Trends in Power Electronics for Renewable energy Systems." March 2022 4, no. 1 (April 26, 2022): 57–64. http://dx.doi.org/10.36548/jeea.2022.1.006.

Full text
Abstract:
The complete world is focused on renewable power to reduce the global energy issue. Power electronic based energy conversion is being used extensively to improve the efficiency of the renewable energy conversion. It has a significant impact on the control and interface of renewable energy systems with both the network and stand-alone applications. As a result, increasing attention is being placed on the design and implementation of power converters. This study discusses the renewable energy systems (wind and solar) and the features of their energy conversion. The fundamental principles underlying their operations are discussed, as well as their recent technological advancements. It is a fact that power electronics is critical for interfacing and thus improving the system capacity.
APA, Harvard, Vancouver, ISO, and other styles
4

Rocha, J. E., and W. D. C. Sanchez. "The Energy Processing by Power Electronics and its Impact on Power Quality." International Journal of Renewable Energy Development 1, no. 3 (November 3, 2012): 99. http://dx.doi.org/10.14710/ijred.1.3.99-105.

Full text
Abstract:
This paper discusses the electrical architectures adopted in wind turbines and its impact on the harmonic flux at the connected electric network. The integration of wind electric generators with the power grid needs energy processing by power electronics. It shows that different types of wind turbine generator systems use different types of electronic converters. This work provides a discussion on harmonic distortion taking place on the generator side, as well as in the power grid side. Keywords: grid connection, harmonic distortion, power electronics and converters, wind energy conversion systems, wind power, wind technology, wind turbines
APA, Harvard, Vancouver, ISO, and other styles
5

Okundamiya, Michael S. "Power Electronics for Grid Integration of Wind Power Generation System." Journal of Communications Technology, Electronics and Computer Science 9 (December 27, 2016): 10. http://dx.doi.org/10.22385/jctecs.v9i0.129.

Full text
Abstract:
The rising demands for a sustainable energy system have stimulated global interests in renewable energy sources. Wind is the fastest growing and promising source of renewable power generation globally. The inclusion of wind power into the electric grid can severely impact the monetary cost, stability and quality of the grid network due to the erratic nature of wind. Power electronics technology can enable optimum performance of the wind power generation system, transferring suitable and applicable energy to the electricity grid. Power electronics can be used for smooth transfer of wind energy to electricity grid but the technology for wind turbines is influenced by the type of generator employed, the energy demand and the grid requirements. This paper investigates the constraints and standards of wind energy conversion technology and the enabling power electronic technology for integration to electricity grid.
APA, Harvard, Vancouver, ISO, and other styles
6

Saponara, Sergio, and Lucian Mihet-Popa. "Energy Storage Systems and Power Conversion Electronics for E-Transportation and Smart Grid." Energies 12, no. 4 (February 19, 2019): 663. http://dx.doi.org/10.3390/en12040663.

Full text
Abstract:
The special issue “Energy Storage Systems and Power Conversion Electronics for E-Transportation and Smart Grid” on MDPI Energies presents 20 accepted papers, with authors from North and South America, Asia, Europe and Africa, related to the emerging trends in energy storage and power conversion electronic circuits and systems, with a specific focus on transportation electrification and on the evolution of the electric grid to a smart grid. An extensive exploitation of renewable energy sources is foreseen for smart grid as well as a close integration with the energy storage and recharging systems of the electrified transportation era. Innovations at both algorithmic and hardware (i.e., power converters, electric drives, electronic control units (ECU), energy storage modules and charging stations) levels are proposed.
APA, Harvard, Vancouver, ISO, and other styles
7

Kularatna, Nihal, Kasun Subasinghage, Kosala Gunawardane, Dilini Jayananda, and Thilanga Ariyarathna. "Supercapacitor-Assisted Techniques and Supercapacitor-Assisted Loss Management Concept: New Design Approaches to Change the Roadmap of Power Conversion Systems." Electronics 10, no. 14 (July 15, 2021): 1697. http://dx.doi.org/10.3390/electronics10141697.

Full text
Abstract:
All electrical and electronic devices require access to a suitable energy source. In a portable electronic product, such as a cell phone, an energy storage unit drives a complex array of power conversion stages to generate multiple DC voltage rails required. To optimize the overall end-to-end efficiency, these internal power conversions should waste minimal energy and deliver more to the electronic modules. Capacitors are one of the main component families used in electronics, to store and deliver electric charges. Supercapacitors, so called because they provide over a million-fold increase in capacitance relative to a traditional capacitor of the same volume, are enabling a paradigm shift in the design of power electronic converter circuits. Here we show that supercapacitors could function as a lossless voltage-dropping element in the power conversion stages, thereby significantly increasing the power conversion stage efficiency. This approach has numerous secondary benefits: it improves continuity of the supply, suppresses voltage surges, allows the voltage regulation to be electromagnetically silent, and simplifies the design of voltage regulators. The use of supercapacitors allows the development of a novel loss-circumvention theory with applicability to a wide range of supercapacitor-assisted (SCA) techniques. These include low-dropout regulators, transient surge absorbers, LED lighting for DC microgrids, and rapid energy transfer for water heating.
APA, Harvard, Vancouver, ISO, and other styles
8

Gedra, T. W., S. An, Q. H. Arsalan, and S. Ray. "Unified Power Engineering Laboratory for Electromechanical Energy Conversion, Power Electronics, and Power Systems." IEEE Transactions on Power Systems 19, no. 1 (February 2004): 112–19. http://dx.doi.org/10.1109/tpwrs.2003.820997.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Fang, Jian, Xun Gai Wang, and Tong Lin. "Power Generation from Randomly Oriented Electrospun Nanofiber Membranes." Advanced Materials Research 479-481 (February 2012): 340–43. http://dx.doi.org/10.4028/www.scientific.net/amr.479-481.340.

Full text
Abstract:
Randomly orientated electrospun poly(vinylidene fluoride) nanofiber membranes were directly used as active layers to make mechanical-to-electrical energy conversion devices. Without any extra poling treatment, the device can generate high electrical outputs upon receiving a mechanical impact. The device also showed long-term working stability and ability to drive electronic devices. Such a nanofiber membrane device may serve as a simple but efficient energy source for self-powered electronics.
APA, Harvard, Vancouver, ISO, and other styles
10

Miazga, Tomasz, Grzegorz Iwański, and Marcin Nikoniuk. "Energy Conversion System and Control of Fuel-Cell and Battery-Based Hybrid Drive for Light Aircraft." Energies 14, no. 4 (February 18, 2021): 1073. http://dx.doi.org/10.3390/en14041073.

Full text
Abstract:
The paper presents a power electronic conversion system and its control for a fuel cell and a battery-based hybrid drive system for a motor glider. The energy conversion system is designed in such a way that the fuel cell gives power equal to the electric drive power demand for horizontal flight, whereas during motor glider take-off and climbing, the fuel cell is supported by the battery. The paper presents the power demand related to the assumed mission profile, the main components of the hybrid drive system and its holistic structure, and details of power electronics control. Selected stationary experimental test results related to the energy conversion and drive system are shown. Some results related to the aircraft tests on a runway are presented.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Power Electronics and energy conversion"

1

Ghosh, Suvradip. "Energy and data conversion circuits for low power sensory systems." Thesis, University of Missouri - Kansas City, 2014. http://pqdtopen.proquest.com/#viewpdf?dispub=3610195.

Full text
Abstract:

This dissertation focuses on the problem of increasing the lifetime of wireless sensors. This problem is addressed from two different angles: energy harvesting and data compression. Energy harvesting enables a sensor to extract energy from its environment and use it to power itself or recharge its batteries. Data compression, on the other hand, allows a sensor to save energy by reducing the radio transmission bandwidth.

This dissertation proposes a fractal-based photodiode fabricated on standard CMOS process as an energy harvesting device with increased efficiency. Experiments show that, the fractal based photodiodes are 6% more efficient compared to the conventional square shaped photodiode. The fractal shape photodiode has more perimeter-to-area ratio which increases the lateral response, improving its efficiency.

With increased efficiency, more current is generated but the open-circuit voltage still remains low (0.3V–0.45V depending on illumination condition). These voltages have to be boosted up to higher values if they are going to be used to power up any sensory circuit or recharge a battery. We propose a switched-inductor DC-DC converter to boost the low voltage of the photodiodes to higher voltages. The proposed circuit uses two on-chip switches and two off-chip Components: an inductor and a capacitor. Experiments show a voltage up to 2.81V can be generated from a single photodiode of 1mm2 area. The voltage booster circuit achieved a conversion efficiency of 59%.

Data compression was also explored in an effort to reduce energy consumption during radio transmission. An analog-to-digital converter (ADC), which can jointly perform the tasks of digital conversion and entropy encoding, has also been proposed in this dissertation. The joint data conversion/compression help savings in area and power resources, making it suitable for on-sensor compression. The proposed converter combines a cyclic converter architecture and Golomb-Rice entropy encoder. The converter hardware design is based on current-mode circuits and it was fabricated on a 0.5 μm CMOS process and tested. Experiment results show a lossless compression ratio of 1.52 and a near-lossless compression of 5.2 can be achieved for 32 × 32 pixel image.

APA, Harvard, Vancouver, ISO, and other styles
2

Chen, Zhe. "Advanced wind energy convertors using electronic power conversion." Thesis, Durham University, 1997. http://etheses.dur.ac.uk/1632/.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Baltierrez, Jason. "Multiple Input, Single Output DC-DC Conversion Stage for DC House." DigitalCommons@CalPoly, 2019. https://digitalcommons.calpoly.edu/theses/2028.

Full text
Abstract:
n this thesis project, a proposed architecture for the multiple input, single output conversion stage for the DC House was designed, simulated, and tested. This architecture allows for multiple different input sources to be used to create a single higher power output source. The design uses a DC-DC boost converter with a parallelable output which has been demonstrated to allow increased total output power as a function of the number of input sources available. The parallelable output has been shown to distribute load amongst the input sources relatively closely to optimize the system. This approach is also desirable since it allows for flexibility in multiple configurations it can be used in. The design was tested using hardware and data results show the performance met and exceeded the needs of the DC House project. Data was taken for configuration with 1, 2, 3, and 4 input sources providing greater than 600W of total output power at an efficiency of greater than 92%. This architecture demonstrates the possibility of expanding the total available power for a single output in proportion to the number of available input sources.
APA, Harvard, Vancouver, ISO, and other styles
4

Todeschini, Grazia. "Wind Energy Conversion Systems based on DFIG Technology used as Active Filters: Steady-State and Transient Analysis." Digital WPI, 2010. https://digitalcommons.wpi.edu/etd-dissertations/97.

Full text
Abstract:
This thesis deals with the performance of a Wind Energy Conversion System operating as a power generator and Active Filter simultaneously. As a power generator, the Wind Energy Conversion System converts wind energy into electric energy; as an Active Filter, it sinks the harmonic currents injected by Non-Linear Loads connected at the same feeder. Three control systems are developed to ensure the described operation; a specific study regarding the compensation of the triplen harmonics is carried out; Doubly-Fed Induction Generator derating is defined; and an engineering economic analysis is performed to determine the profitability of the proposed operation. The Wind Energy Conversion System performance as generator and Active Filter has been studied for steady-state analysis, fast transients and low transients. It is concluded that the proposed control systems allow operating the Wind Energy Conversion System as power generator and harmonic compensator both during steady state and transient operation; the described operation causes power loss increase and voltage distortion that determine the choice of the component and require system derating.
APA, Harvard, Vancouver, ISO, and other styles
5

Esmaili, Gholamreza. "Application of advanced power electronics in renewable energy sources and hybrid generating systems." Columbus, Ohio : Ohio State University, 2006. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=osu1141850833.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Elamalayil, Soman Deepak. "Multilevel Power Converters with Smart Control for Wave Energy Conversion." Doctoral thesis, Uppsala universitet, Elektricitetslära, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-332730.

Full text
Abstract:
The main focus of this thesis is on the power electronic converter system challenges associated with the grid integration of variable-renewable-energy (VRE) sources like wave, marine current, tidal, wind, solar etc. Wave energy conversion with grid integration is used as the key reference, considering its high energy potential to support the future clean energy requirements and due the availability of a test facility at Uppsala University. The emphasis is on the DC-link power conditioning and grid coupling of direct driven wave energy converters (DDWECs). The DDWEC reflects the random nature of its input energy to its output voltage wave shape. Thereby, it demands for intelligent power conversion techniques to facilitate the grid connection. One option is to improve and adapt an already existing, simple and reliable multilevel power converter technology, using smart control strategies. The proposed WECs to grid interconnection system consists of uncontrolled three-phase rectifiers, three-level boost converter(TLBC) or three-level buck-boost converter (TLBBC) and a three-level neutral point clamped (TLNPC) inverter. A new method for pulse delay control for the active balancing of DC-link capacitor voltages by using TLBC/TLBBC is presented. Duty-ratio and pulse delay control methods are combined for obtaining better voltage regulation at the DC-link and for achieving higher controllability range. The classic voltage balancing problem of the NPC inverter input, is solved efficiently using the above technique. A synchronous current compensator is used for the NPC inverter based grid coupling. Various results from both simulation and hardware testing show that the required power conditioning and power flow control can be obtained from the proposed multilevel multistage converter system. The entire control strategies are implemented in Xilinx Virtex 5 FPGA, inside National Instruments’ CompactRIO system using LabVIEW. A contour based dead-time harmonic analysis method for TLNPC and the possibilities of having various interconnection strategies of WEC-rectifier units to complement the power converter efforts for stabilizing the DC-link, are also presented. An advanced future AC2AC direct power converter system based on Modular multilevel converter (MMC) structure developed at Siemens AG is presented briefly to demonstrate the future trends in this area.
APA, Harvard, Vancouver, ISO, and other styles
7

Rahimi, Arian. "Design And Implementation Of Low Power Interface Electronics For Vibration-based Electromagnetic Energy Harvesters." Master's thesis, METU, 2011. http://etd.lib.metu.edu.tr/upload/12613820/index.pdf.

Full text
Abstract:
For many years batteries have been used as the main power sources for portable electronic devices. However, the rate of scaling in integrated circuits and micro-electro-mechanical systems (MEMS) has been much higher than that of the batteries technology. Therefore, a need to replace these temporary energy reservoirs with small sized continuously charged energy supply units has emerged. These units, named as energy harvesters, use several types of ambient energy sources such as heat, light, and vibration to provide energy to intelligent systems such as sensor nodes. Among the available types, vibration based electromagnetic (EM) energy harvesters are particularly interesting because of their simple structure and suitability for operation at low frequency values (<
10 Hz), where most vibrations exits. However, since the generated EM power and voltage is relatively low at low frequencies, high performance interface electronics is required for efficiently transferring the generated power from the harvester to the load to be supplied. The aim of this study is to design low power and efficient interface electronics to convert the low voltage and low power generated signals of the EM energy harvesters to DC to be usable by a real application. The most critical part of such interface electronics is the AC/DC converter, since all the other blocks such as DC/DC converters, power managements units, etc. rely on the rectified voltage generated by this block. Due to this, several state-of-the-art rectifier structures suitable for energy harvesting applications have been studied. Most of the previously proposed rectifiers have low conversion efficiency due to the high voltage drop across the utilized diodes. In this study, two rectifier structures are proposed: one is a new passive rectifier using the Boot Strapping technique for reducing the diode turn-on voltage values
the other structure is a comparator-based ultra low power active rectifier. The proposed structures and some of the previously reported designs have been implemented in X-FAB 0.35 µ
m standard CMOS process. The autonomous energy harvesting systems are then realized by integrating the developed ASICs and the previously proposed EM energy harvester modules developed in our research group, and these systems have been characterized under different electromechanical excitation conditions. In this thesis, five different systems utilizing different circuits and energy harvesting modules have been presented. Among these, the system utilizing the novel Boot Strap Rectifier is implemented within a volume of 21 cm3, and delivers 1.6 V, 80 µ
A (128 µ
W) DC power to a load at a vibration frequency of only 2 Hz and 72 mg peak acceleration. The maximum overall power density of the system operating at 2 Hz is 6.1 µ
W/cm3, which is the highest reported value in the literature at this operation frequency. Also, the operation of a commercially available temperature sensor using the provided power of the energy harvester has been shown. Another system utilizing the comparator-based active rectifier implemented with a volume of 16 cm3, has a dual rail output and is able to drive a 1.46 V, 37 µ
A load with a maximum power density of 6.03 µ
W/cm3, operating at 8 Hz. Furthermore, a signal conditioning system for EM energy harvesting has also been designed and simulated in TSMC 90 nm CMOS process. The proposed ASIC includes a highly efficient AC-DC converter as well as a power processing unit which steps up and regulates the converted DC voltages using an on-chip DC/DC converter and a sub-threshold voltage regulator with an ultra low power management unit. The total power consumption on the totally passive IC is less than 5 µ
W, which makes it suitable for next generation MEMS-based EM energy harvesters. In the frame of this study, high efficiency CMOS rectifier ICs have been designed and tested together with several vibration based EM energy harvester modules. The results show that the best efficiency and power density values have been achieved with the proposed energy harvesting systems, within the low frequency range, to the best of our knowledge. It is also shown that further improvement of the results is possible with the utilization of a more advanced CMOS technology.
APA, Harvard, Vancouver, ISO, and other styles
8

Liddle, Marshall. "Towards a better wind power map of Nevada." abstract and full text PDF (free order & download UNR users only), 2008. http://0-gateway.proquest.com.innopac.library.unr.edu/openurl?url_ver=Z39.88-2004&rft_val_fmt=info:ofi/fmt:kev:mtx:dissertation&res_dat=xri:pqdiss&rft_dat=xri:pqdiss:1453599.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Davenport, Tattiana Karina Coleman. "Three-Phase Generation Using Reactive Networks." DigitalCommons@CalPoly, 2015. https://digitalcommons.calpoly.edu/theses/1345.

Full text
Abstract:
Household appliances utilize single-phase motors to perform everyday jobs whether it is to run a fan in an air conditioner or the compressor in a refrigerator. With the movement of the world going “green” and trying to make everything more efficient, it is a logical step to start with the items that we use every day. This can be done by replacing single-phase motors with three-phase motors in household appliances. Three-phase motors are 14% more efficient than single-phase motors when running at full load and typically cost less over a large range of sizes [1]. One major downside of incorporating three-phase motors in household appliance is that three-phase power is not readily available in homes. With the motor replacement, a single to three-phase converter is necessary to convert the single-phase wall power into the required three-phase input of the motor. One option is active conversion, which uses switches and introduces different stages that produce power loss [2]. An alternative solution is passive conversion that utilizes the resistances within the motor windings along with additional capacitors and inductors, which in theory are lossless. This study focuses on three different single to three-phase passive converters to run both wye and delta-connected three-phase induction motors, and a possible third winding configuration that utilizes one of the three converters. There will be an emphasis on proving the equivalency of two converters, one proposed by Stuart Marinus and Michel Malengret [11] and the other by Otto Smith [12]. Sensitivity analysis is performed to study the effects of variation of torque and converter component tolerances on the system.
APA, Harvard, Vancouver, ISO, and other styles
10

Samir, Karmacharya. "Modelling and control of micro-combined heat and power (CHP) to optimise energy conversion and support power distribution networks." Thesis, Northumbria University, 2013. http://nrl.northumbria.ac.uk/21424/.

Full text
Abstract:
Climate change and continuously increasing energy prices have driven the need for low carbon and renewable energy technologies from different sectors, including the domestic sector, by installing higher energy efficiency technologies. One of these technologies is the Stirling engine based micro-combined heat and power (CHP) which has the potential to achieve lower overall carbon emissions by generating both heat and electricity locally. Its successful implementation to meet the energy demands (thermal and electrical) throughout the year depends on several factors such as the size and type of building and demand profiles. In addition, the deployment of large number of micro-CHPs may have significant impact on the performance of the power distribution networks.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Power Electronics and energy conversion"

1

Ioinovici, Adrian. Power electronics and energy conversion systems. Chichester, West Sussex: John Wiley & Sons, 2012.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Simões, M. Godoy, and Felix A. Farret. Modeling Power Electronics and Interfacing Energy Conversion Systems. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2016. http://dx.doi.org/10.1002/9781119058458.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Dost, Philip Karl-Heinz. Multi-functional Power Electronics Tailored for Energy Conversion Plants. Wiesbaden: Springer Fachmedien Wiesbaden, 2020. http://dx.doi.org/10.1007/978-3-658-29983-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Séguier, Guy. Power Electronic Converters: DC-AC Conversion. Berlin, Heidelberg: Springer Berlin Heidelberg, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Hong, Ye, ed. Renewable energy systems: Advanced conversion technologies and applications. Boca Raton, FL: Taylor & Francis, 2012.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

François, Béguin, and Frackowiak Elzbieta, eds. Carbons for electrochemical energy storage and conversion systems. Boca Raton: Taylor & Francis, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Power and Energy Conversion Symposium (2nd 2014 Melaka). The 2nd Power and energy conversion symposium (PECS 2014): Sustainable renewable energy development for the future, 12th May 2014, Universiti Teknikal MalaysialMelaka. Edited by Rosli Omar, Prof. Madya, Dr., Ir., editor, Gan, Chin Kim, Dr., editor, Mohamed Azmi Said editor, Musa Yusup Lada editor, and Arfah Ahmad editor. Melaka: Penerbit Universiti, Universiti Teknikal Malaysia Melaka, 2014.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Kaboli, Shahriyar. Reliability in power electronics and electrical machines: Industrial applications and performance models. Hershey, PA: Engineering Science Reference, 2016.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

1936-, Secker P. E., ed. Industrial electrostatics: Fundamentals and measurements. Taunton, Somerset, England: Research Studies Press, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Feng li fa dian zhong de dian li dian zi bian liu ji shu: Power electronic converter technology in wind power generation. Beijing Shi: Ji xie gong ye chu ban she, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Power Electronics and energy conversion"

1

Blaabjerg, Frede, and Zhe Chen. "Wind Energy Conversion." In Power Electronics for Modern Wind Turbines, 3–6. Cham: Springer International Publishing, 2006. http://dx.doi.org/10.1007/978-3-031-02494-8_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Rekioua, Djamila. "Wind Energy Conversion and Power Electronics Modeling." In Wind Power Electric Systems, 51–76. London: Springer London, 2014. http://dx.doi.org/10.1007/978-1-4471-6425-8_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kouro, Samir, Bin Wu, Haitham Abu-Rub, and Frede Blaabjerg. "Photovoltaic Energy Conversion Systems." In Power Electronics for Renewable Energy Systems, Transportation and Industrial Applications, 160–98. Chichester, UK: John Wiley & Sons, Ltd, 2014. http://dx.doi.org/10.1002/9781118755525.ch7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Dost, Philip Karl-Heinz. "Power Electronic System." In Multi-functional Power Electronics Tailored for Energy Conversion Plants, 59–177. Wiesbaden: Springer Fachmedien Wiesbaden, 2020. http://dx.doi.org/10.1007/978-3-658-29983-5_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Costa, François, Cyrille Gautier, Eric Labouré, and Bertrand Revol. "EMC of Complex Electrical Energy Conversion Systems: Electromagnetic Actuators." In Electromagnetic Compatibility in Power Electronics, 143–206. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2014. http://dx.doi.org/10.1002/9781118863183.ch3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Fuchs, Ewald F., and Mohammad A. S. Masoum. "Power Electronic Converters." In Power Conversion of Renewable Energy Systems, 135–216. Boston, MA: Springer US, 2011. http://dx.doi.org/10.1007/978-1-4419-7979-7_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Brandão, Danilo Iglesias, and Fernando Pinhabel Marafão. "DIGITAL PROCESSING TECHNIQUES APPLIED TO POWER ELECTRONICS." In Modeling Power Electronics and Interfacing Energy Conversion Systems, 279–320. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2016. http://dx.doi.org/10.1002/9781119058458.ch12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Zhang, Hui, and Haiwen Liu. "Potential Applications and Impact of Most-Recent Silicon Carbide Power Electronics in Wind Turbine Systems." In Wind Energy Conversion Systems, 81–109. London: Springer London, 2012. http://dx.doi.org/10.1007/978-1-4471-2201-2_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Jin, Hua. "FROM PSIM SIMULATION TO HARDWARE IMPLEMENTATION IN DSP." In Modeling Power Electronics and Interfacing Energy Conversion Systems, 255–78. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2016. http://dx.doi.org/10.1002/9781119058458.ch11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Fuchs, Ewald F., and Mohammad A. S. Masoum. "Electronic Controllers for Feedback Systems." In Power Conversion of Renewable Energy Systems, 115–34. Boston, MA: Springer US, 2011. http://dx.doi.org/10.1007/978-1-4419-7979-7_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Power Electronics and energy conversion"

1

Elbuluk, Malik E., and M. David Kankam. "Power Electronics Building Blocks (PEBB) in Aerospace Power Electronic Systems." In 34th Intersociety Energy Conversion Engineering Conference. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1999. http://dx.doi.org/10.4271/1999-01-2443.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

"Power electronics and energy conversion." In 2017 IEEE International Conference on Industrial Technology (ICIT). IEEE, 2017. http://dx.doi.org/10.1109/icit.2017.7912589.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

"Power electronics and energy conversion." In IECON 2011 - 37th Annual Conference of IEEE Industrial Electronics. IEEE, 2011. http://dx.doi.org/10.1109/iecon.2011.6119331.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

"Power electronics and energy conversion." In IECON 2012 - 38th Annual Conference of IEEE Industrial Electronics. IEEE, 2012. http://dx.doi.org/10.1109/iecon.2012.6388831.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

"Power electronics and energy conversion." In IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society. IEEE, 2013. http://dx.doi.org/10.1109/iecon.2013.6699122.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

"Power electronics and energy conversion." In 2013 IEEE International Conference on Industrial Technology (ICIT 2013). IEEE, 2013. http://dx.doi.org/10.1109/icit.2013.6505710.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

"Power electronics and energy conversion." In 2016 IEEE International Conference on Industrial Technology (ICIT). IEEE, 2016. http://dx.doi.org/10.1109/icit.2016.7474754.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

"Power Electronics and Energy Conversion." In 2018 IEEE 27th International Symposium on Industrial Electronics (ISIE). IEEE, 2018. http://dx.doi.org/10.1109/isie.2018.8433815.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

"Power Electronics and Energy Conversion." In 2019 IEEE 28th International Symposium on Industrial Electronics (ISIE). IEEE, 2019. http://dx.doi.org/10.1109/isie.2019.8781190.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

"Power Electronics and Energy Conversion." In 2020 IEEE 29th International Symposium on Industrial Electronics (ISIE). IEEE, 2020. http://dx.doi.org/10.1109/isie45063.2020.9152482.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Power Electronics and energy conversion"

1

Fowler. L51754 Field Application of Electronic Gas Admission with Cylinder Pressure Feedback for LB Engines. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), June 1996. http://dx.doi.org/10.55274/r0010363.

Full text
Abstract:
�The purpose of this project was to evaluate the performance of electronic fuel gas admission valves and effects of continuous automatic cylinder balancing of large bore natural gas engines under actual field conditions. These goals have already been met under laboratory conditions at the Colorado State University Engines and Energy Conversion Laboratory in Fort Collins. The specific project objectives were to:1. Extend the feasibility of electronic fuel gas admission valves where gas valve timing and duration are varied to optimize fuel control and charge mixing from the laboratory environment to actual field applications. 2. Extend the feasibility of closed loop control using in-cylinder pressure sensors to achieve continuous, automatic power cylinder balancing from the laboratory environment to actual field applications. 3. Repeat the benefits of automatic continuous cylinder balancing shown in the laboratory testing under actual field conditions (i.e. fuel savings, improved cylinder misfire rates, improved emissions levels). In order to accomplish these objectives, the Woodward Governor Company AutoBalance TM 5000 control system was installed and tested at four host sites. Although the specific test plan differed slightly for the four host sites, the focus of the test program was consistent. The primary objective was to evaluate the effects of engine balance and the performance of the control system by testing a matrix of varying engine loads and speeds. Load and speed are the two primary control parameters affecting engine balance. Other tests were conducted to determine the effects of the electronic gas admission valve (EGAV) configuration (i.e. start of admission, end of admission, and duration).
APA, Harvard, Vancouver, ISO, and other styles
2

Lyons, Karen S. Emerging Power/Energy Technologies for Portable Electronics for SOCOM. Fort Belvoir, VA: Defense Technical Information Center, February 2008. http://dx.doi.org/10.21236/ada478532.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Druxman, Lee Daniel. Power conversion from environmentally scavenged energy sources. Office of Scientific and Technical Information (OSTI), September 2007. http://dx.doi.org/10.2172/920810.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Waits, C. M. Thermophotovoltaic Energy Conversion for Personal Power Sources. Fort Belvoir, VA: Defense Technical Information Center, February 2012. http://dx.doi.org/10.21236/ada563073.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Kizilyalli, Isik C., Eric P. Carlson, Daniel W. Cunningham, Joseph S. Manser, Yanzhi Ann Xu, and Alan Y. Liu. Wide Band-Gap Semiconductor Based Power Electronics for Energy Efficiency. Office of Scientific and Technical Information (OSTI), March 2018. http://dx.doi.org/10.2172/1464211.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Oh, C. H. Energy Conversion Advanced Heat Transport Loop and Power Cycle. Office of Scientific and Technical Information (OSTI), August 2006. http://dx.doi.org/10.2172/911672.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Mekhiche, Mike, Hiz Dufera, and Deb Montagna. Advanced, High Power, Next Scale, Wave Energy Conversion Device. Office of Scientific and Technical Information (OSTI), October 2012. http://dx.doi.org/10.2172/1097434.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Atcitty, Stanley, and Sarah Hambridge. Multi-Objective Optimization for Power Electronics used in Grid-Tied Energy Storage Systems. Office of Scientific and Technical Information (OSTI), November 2014. http://dx.doi.org/10.2172/1762045.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Treanton, B., J. Palomo, B. Kroposki, and H. Thomas. Advanced Power Electronics Interfaces for Distributed Energy Workshop Summary: August 24, 2006, Sacramento, California. Office of Scientific and Technical Information (OSTI), October 2006. http://dx.doi.org/10.2172/894428.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Atcitty, S., A. Gray-Fenner, and S. Ranade. Summary of State-of-the-Art Power Conversion Systems for Energy Storage Applications. Office of Scientific and Technical Information (OSTI), September 1998. http://dx.doi.org/10.2172/1894.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Power Electronics and energy conversion' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography