Relevant bibliographies by topics / Potential flow

Academic literature on the topic 'Potential flow'

Author: Grafiati
Published: 4 June 2021
Last updated: 6 September 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Contents

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Potential flow.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Potential flow"

1

JOSEPH, D. D. "Viscous potential flow." Journal of Fluid Mechanics 479 (March 25, 2003): 191–97. http://dx.doi.org/10.1017/s0022112002003634.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Gittel, Hans-Peter. "On some properties of solutions of transonic potential flow problems." Applications of Mathematics 34, no. 5 (1989): 402–16. http://dx.doi.org/10.21136/am.1989.104368.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Greengard, L. "Potential Flow in Channels." SIAM Journal on Scientific and Statistical Computing 11, no. 4 (July 1990): 603–20. http://dx.doi.org/10.1137/0911035.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Brizuela, Edward A. "Potential flow in elbows." Journal of Wind Engineering and Industrial Aerodynamics 45, no. 2 (May 1993): 125–37. http://dx.doi.org/10.1016/0167-6105(93)90266-q.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Beale, S. B. "POTENTIAL FLOW IN TUBE BANKS." Transactions of the Canadian Society for Mechanical Engineering 23, no. 3-4 (September 1999): 353–59. http://dx.doi.org/10.1139/tcsme-1999-0023.

Full text
Abstract:
This paper presents an analytical solution for potential cross-flow in doubly-periodic in-line and staggered tube banks. The solution, in the form of a power series for the complex potential, is consistent with the well-known solution for a single cylinder. Results are tabulated for in-line square, rotated square, and equilateral triangle geometries for pitch-to-diameter ratio 1.25 ≤ s/d ≤ 2. Pressure contours and flow nets are presented for selected cases, together with local pressure coefficient and wall velocity data.
APA, Harvard, Vancouver, ISO, and other styles
6

Germano, M., and M. S. Oggiano. "Potential flow in helical pipes." Meccanica 22, no. 1 (March 1987): 8–13. http://dx.doi.org/10.1007/bf01560119.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Sprunt, Eve S., Tony B. Mercer, and Nizar F. Djabbarah. "Streaming potential from multiphase flow." GEOPHYSICS 59, no. 5 (May 1994): 707–11. http://dx.doi.org/10.1190/1.1443628.

Full text
Abstract:
In trying to understand the affect of electrokinetics on the spontaneous potential (SP) log, the focus has generally been on the solid‐brine streaming potential. Within the accuracy of the measurements, the streaming‐potential coupling coefficient is shown to be independent of the permeability of the rock. The solid‐brine streaming potential is of much smaller magnitude than the electrostatic potentials from gas‐liquid and liquid‐liquid flow. Air bubbles were found to increase the streaming potential coupling coefficient by more than two orders of magnitude over the value for single‐phase brine flow. Thus, two‐phase gas‐liquid flow is more likely to have a significant impact on the SP log than is single phase liquid flow. Two‐phase oil‐brine flow may also produce a larger electrokinetic potential than single‐phase flow. The magnitude of the electrokinetic potential caused by oil‐brine flow will depend on the composition of the oil and the brine. Trace materials can have a major impact on the electrokinetic potential of hydrocarbons. In a system with multiphase flow, the solid‐liquid interaction is probably the smallest component of the electrokinetic potential.
APA, Harvard, Vancouver, ISO, and other styles
8

Agudo, M., J. Marcos, A. Ríos, and M. Valcárcel. "Analytical potential of flow gradients in unsegmented flow systems." Analytica Chimica Acta 239 (1990): 211–20. http://dx.doi.org/10.1016/s0003-2670(00)83855-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Pillai, Dipin S., B. Dinesh, T. Sundararajan, and S. Pushpavanam. "A Viscous Potential Flow model for core-annular flow." Applied Mathematical Modelling 40, no. 7-8 (April 2016): 5044–62. http://dx.doi.org/10.1016/j.apm.2015.12.017.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Staubus, George J. "Cash Flow Accounting and Liquidity: Cash Flow Potential and Wealth." Accounting and Business Research 19, no. 74 (March 1989): 161–69. http://dx.doi.org/10.1080/00014788.1989.9728846.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Potential flow"

1

Dumancic, Dominik. "Flow batteries : Status and potential." Thesis, Mälardalens högskola, Akademin för hållbar samhälls- och teknikutveckling, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-12975.

Full text
Abstract:
New ideas and solutions are necessary to face challenges in the electricity industry. The application of electricity storage systems (ESS) can improve the quality and stability of the existing electricity network. ESS can be used for peak shaving, instead of installing new generation or transmission units, renewable energy time-shift and many other services. There are few ESS technologies existing today: mechanical, electrical and electrochemical storage systems. Flow batteries are electrochemical storage systems which use electrolyte that is stored in a tank separated from the battery cell. Electrochemistry is very important to understand how a flow battery functions and how it stores electric energy. The functioning of a flow battery is based on reduction and oxidation reactions in the cell. To estimate the voltage of a cell the Nernst equation is used. It tells how the half-cell potential changes depending on the change of concentration of a substance involved in an oxidation or reduction reaction. The first flow battery was invented in the 1880’s, but was forgotten for a long time. Further development was revived in the 1950’s and 1970’s. A flow battery consists of two parallel electrodes separated by an ion exchange membrane, forming two half-cells. The electro-active materials are stored externally in an electrolyte and are introduced into the device only during operation. The vanadium redox battery (VRB) is based on the four possible oxidation states of vanadium and has a standard potential of 1.23 V. Full ionic equations of the VRB include protons, sulfuric acid and the corresponding salts. The capital cost of a VRB is approximately 426 $/kW and 100 $/kWh. Other flow batteries are polysulfide-bromine, zinc bromine, vanadium-bromine, iron-chromium, zinc-cerium, uranium, neptunium and soluble lead-acid redox flow batteries. Flow batteries have long cycle life and quick response times, but are complicated in comparison with other batteries.
Nya idéer och lösningar är nödvändiga för att möta utmaningarna i elbranschen. Användningen av elektriskt lagringssystem (ESS) kan förbättra kvalitén och stabiliteten av det nuvarande elnätet. ESS kan användas till toppbelastningsutjämning, istället för att installera nya produktions eller kraft överförnings enheter, förnybar energi tidsförskjutning och många andra tjänster. I dagsläget finns det få olika ESS: Mekaniska, elektriska och elektrokemiska lagringssystem. Flödesbatterier tillhör kategorin elektrokemiska lagringssystem som använder sig utav elektrolyt som är lagrad i en tank separerad från battericellen. För att kunna förstå hur flödesbatteriernas funktioner och på vilket sätt som dem lagrar elektriskt energi är det viktigt att kunna elektrokemi. Flödesbatteriernas funktion är baserad på reduktions och oxidations reaktioner i cellen. Nernsts ekvation används för att kunna uppskatta voltantalet i en cell. Nernsts ekvation säger hur halvcell potentialen ändras beroende av ändringen av koncentrationen av ämnet involverat i oxidations eller reduktions reaktionen. Det första flödesbatteriet uppfanns 1880-talet, men blev bortglömt under en lång tid. Vidare utveckling förnyades under 1950 och 1970-talet. Ett flödesbatteri består utav två parallella elektroder som är separerade utav ett jonbytes membran vilket formar två halvceller. Dem elektroaktiva materialen är lagrade externt i elektrolyt och är införs bara i anordningen under användning. Vanadium redox batteriet (VRB) är baserat på dem fyra möjliga oxidations tillstånden av vanadium och har en standard potential på 1.23 V. Fullt joniska ekvationer av VRB inkluderar protoner, svavelsyra och deras motsvarande salter. Kapitalkostnaden av ett VRB är ungefär 426 $/kW och 100 $/kWh. Det finna andra flödesbatterier som är polysulfide-brom, zink-brom, vanadium-brom, järn-krom, uran, neptunium och löslig blysyre redox flödesbatterier. Flödesbatterier har en lång omloppstid samt en snabb svarstid men är komplicerade jämfört med andra batterier.
APA, Harvard, Vancouver, ISO, and other styles
2

Yu, Wenyuan. "Development of a Fully Vectorized Potential Flow Solver." Thesis, KTH, Mekanik, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-214950.

Full text
Abstract:
Centered finite difference is the basic method in this paper for spatial discretization. In general, except the schemes that will be used adjacent tothe boundary points, centered finite difference schemes will be used on the main mesh points. Depending on the requirement of order of accuracy and optimization, different multi-point stencil schemes will be built in Matlab in the form of matrix. As a result, solving PDEs is actually operating matrices in Matlab. Standard schemes and optimized schemeswill be tested with 1D linear convection equation before applying them to the solvers. In 2D-pulse case, the rectangular domain will be transformed into a wavy domain and as a result Jacobian transformation method will betested. Results from different schemes will be compared with the analytical solution in two dimensional pulse case.
APA, Harvard, Vancouver, ISO, and other styles
3

Hasson, Ali Thuriya A. Razzak. "A flow cell to study formation potential of pulps." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1997. http://www.collectionscanada.ca/obj/s4/f2/dsk2/ftp03/MQ29377.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Zhang, Jiazuo. "Self-potential during multiphase flow in complex porous media." Thesis, Imperial College London, 2017. http://hdl.handle.net/10044/1/48479.

Full text
Abstract:
The rock pore space in many subsurface settings is saturated with water and one or more immiscible fluid phases; examples include non-aqueous-phase liquids (NAPLs) in contaminated aquifers, supercritical CO2 during sequestration in deep saline aquifers, the vadose zone, and hydrocarbon reservoirs. Self-potential (SP) methods have been proposed to monitor multiphase flow in such settings. However, to properly interpret and model these data requires an understanding of the saturation dependence of the streaming potential. This study presents a methodology to determine the saturation dependence of the streaming potential coupling coefficient and streaming current charge density in unsteady-state drainage and imbibition experiments and applies the method to published experimental data. Unsteady-state experiments do not yield representative values of coupling coefficient and streaming current density (or other transport properties such as relative permeability and electrical conductivity) at partial saturation because water saturation within the sample is not uniform. An interpretation method is required to determine the saturation dependence of coupling coefficient and streaming current density within a representative elementary volume with uniform saturation. The method makes no assumptions about the pore-space geometry. We also applied pore network models that can capture the distribution of fluids and electrical charge in real complex porous media to investigate and quantify streaming potential signals during multiphase flow at the pore level. The network modelling results were tested against the interpreted data and experimental data of Estaillades carbonate and St. Bees sandstone, which provided reliable pore-scale explanations of the experimental observations. The results presented here can be used to help interpret SP measurements obtained in partially-saturated subsurface settings.
APA, Harvard, Vancouver, ISO, and other styles
5

Capanna, Roberto. "Modelling of fluid structure interaction by potential flow theory in a pwr under seismic excitation." Thesis, Ecole centrale de Marseille, 2018. http://www.theses.fr/2018ECDM0013/document.

Full text
Abstract:
Une modélisation efficace et une connaissance précise du comportement mécanique du cœur du réacteur sont nécessaires pour estimer les effets de l'excitation sismique sur une centrale nucléaire. La présence d'un écoulement d'eau (dans les REP) engendre des phénomènes d'interaction fluide structure. La modélisation des interactions fluide structure sur les assemblages combustible revêt donc une importance fondamentale pour la sécurité des réacteurs nucléaires. L’objectif principal du projet de thèse présenté dans ce document est d’étudier les interactions fluide structure afin de mieux comprendre les phénomènes impliqués. La modélisation et l'approche expérimentale sont considérées. Un nouveau modèle linéaire simplifié pour les interactions fluide structure est développé en utilisant la théorie de l'écoulement potentiel pour la modélisation des forces fluide, tandis que le modèle de poutre d'Euler-Bernoulli est utilisé pour la partie structurelle. Le modèle est d'abord développé pour un seul cylindre et il est validé avec des ouvrages de référence dans la littérature. Les effets de la taille de confinement et du nombre d'onde sont examinés. Le modèle d'écoulement potentiel développé pour un seul cylindre est ainsi étendu à une géométrie multicylindre. La démarche expérimentale est donc nécessaire pour valider le modèle développé. Une nouvelle installation expérimentale, ICARE, a été conçue pour étudier les phénomènes d’interaction fluide structure sur des assemblages combustible à demi-échelle. Dans ce document, les résultats fournis par les mesures de déplacement et de LDV sont largement analysés. Le comportement dynamique de l'assemblage combustible et les effets de couplage sont étudiés. Les calculs sont comparés aux résultats expérimentaux afin de valider le modèle et d’en analyser ses limites. Le modèle est en accord avec les résultats expérimentaux concernant l'effet de masse ajouté. De plus, le modèle prédit qualitativement les effets des couplages dans différentes directions. Par contre, le modèle d'écoulement potentiel ne permet pas de prédire des effets d'amortissement ajouté, principalement dus aux forces visqueuses. Enfin, dans ce document, une autre application du modèle développé est décrite. Le modèle est utilisé afin de simuler des expériences réalisées sur une maquette d'assemblage combustible dans l'installation expérimentale installée à l'Université George Washington (GWU). Le modèle est capable de prédire et de fournir une interprétation valide de la perturbation du débit d'eau due au mouvement de l'ensemble excité. La thèse se termine par des perspectives d'amélioration du modèle, en intégrant des termes visqueux dans les équations. L'analyse des données de vélocimétrie par image de particules (PIV) recueillies au cours des campagnes expérimentales ICARE doit être poursuivie
Efficient modelling and accurate knowledge of the mechanical behaviour of the reactorcore are needed to estimate the effects of seismic excitation on a nuclear power plant. Thepresence of cooling water flow (in PWRs) gives rise to fluid structure interaction phenomena.Modelling of fluid structure interactions on fuel assemblies is thus of fundamentalimportance in order to assure the safety of nuclear reactors. The main objective of thePhD project which is presented in this document is to investigate fluid structure interactionsin order to have a better understanding of the involved phenomena. Both modellingand experimental approach are considered. A new simplified linear model for fluid structureinteractions is developed by using the potential flow theory for fluid force modellingwhile the Euler-Bernoulli beam model is used for the structural part. The model, is firstdeveloped for a single cylinder and it is validated with reference works in literature. Theeffects of the confinement size and of the wavenumber are investigated. The potential flowmodel developed for a single cylinder, is thus extended to a multi cylinders geometry. Theexperimental approach is thus needed in order to validate the developed model. A newexperimental facility, ICARE, is designed in order to investigate fluid structure interactionphenomena on half scale fuel assemblies. In this document, the results provided bydisplacement and LDV measurements are widely analysed. The dynamical behaviour ofthe fuel assembly and coupling effects are investigated. Calculations are compared to theexperimental results in order to validate the model and to analyse its limits. The model isin agreement with experimental results regarding the added mass effect. In addition, themodel qualitatively predicts couplings effects on different directions. As a drawback, thepotential flow model cannot predict added damping effects, which are mainly due to viscousforces. Finally in this document another application of the developed model is described.The model is used in order to simulate experiments performed on a surrogate fuel assemblyin the experimental facility installed at George Washington University (GWU). The modelis able to predict and to provide a valid interpretation for the water flow perturbation dueto the motion of the excited assembly. The thesis concludes with perspectives for furtherimprovements of the model, by integrating viscous terms in the equations. Work needs tobe carried out on the analysis of Particle Image Velocimetry (PIV) data collected duringICARE experimental campaigns
APA, Harvard, Vancouver, ISO, and other styles
6

Yaramadi, Dehnavi Pouya. "Global cycle of gallium production, use and potential recycling." Thesis, KTH, Mark- och vattenteknik (flyttat 20130630), 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-171838.

Full text
Abstract:
Life cycle analysis is an appropriate way to clear obscure facts about an element. Gallium is a critical element which is used in many technologies these days and therefore quantification of main global cycles of gallium, production, consumption and end of life products, also investigation about recycled gallium content and potential recycling possibilities are investigated in this paper. First a qualitative substance flow for gallium is designed similar to other metal cycles with regards to exclusive characteristics of gallium flows itself. USGS and World Mining Data are mainly used to get information about gallium production, main gallium consumptions and end of life products. Subsequently a quantitative model in STAN should unlock many uncertainties. Substance flow analysis and material flow analysis give a better understanding of unknown gallium flows with their uncertainties and meanwhile major applications, concentration of gallium in different products, waste flows, landfills and present recycling technologies are detailed. Consequently STAN model asserts that main gallium flows are primary gallium production and refined gallium production in production process, Integrated Circuit board fabrication, Light Emitting Diodes, Photovoltaic and recycled new scrap flow in manufacturing process. A significant amount of gallium is collected as stock in consumption process. Also current gallium recycling facilities are limited as recycling is not economically justified. Moreover main part of recycled gallium content is collected from new scrap which is formed through manufacturing process. Finally gallium consumption in Photovoltaic and Light Emitting Diodes industry increases rapidly and sustainability demand cost efficient methods for gallium recycling from solar cells, diodes and other end of life products.
APA, Harvard, Vancouver, ISO, and other styles
7

Belyadi, Fatemeh. "Determining low permeability formation properties from absolute open flow potential." Morgantown, W. Va. : [West Virginia University Libraries], 2006. https://eidr.wvu.edu/etd/documentdata.eTD?documentid=4879.

Full text
Abstract:
Thesis (M.S.)--West Virginia University, 2006.
Title from document title page. Document formatted into pages; contains viii, 63 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 36-42).
APA, Harvard, Vancouver, ISO, and other styles
8

Chan, Johnson Lap-Kay. "Numerical procedure for potential flow problems with a free surface." Thesis, University of British Columbia, 1987. http://hdl.handle.net/2429/28637.

Full text
Abstract:
A numerical procedure based upon a boundary integral method for gravity wave making problems is studied in the time domain. The free-surface boundary conditions are combined and expressed in a Lagrangian notation to follow the free-surface particle's motion in time. The corresponding material derivative term is approximated by a finite difference expression, and the velocity terms are extrapolated in time for the completion of the formulations. The fluid-body intersection position at the free surface is predicted by an interpolation function that requires information from both the free surface and the submerged surface conditions. Solutions corresponding to a linear free-surface condition and to a non-linear free-surface condition are obtained at small time increment values. Numerical modelling of surface wave problems is studied in two dimensions and in three dimensions. Comparisons are made to linear analytical solutions as well as to published experimental results. Good agreement between the numerical solutions and measured values is found. For the modelling of a three dimensional wave diffraction problem, results at high wave amplitude are restricted because of the use of quadrilateral elements. The near cylinder region of the free surface is not considered to be well represented because of the coarse element size. Wave forces calculated on the vertical cylinder are found to be affected by the modelled tank length. When the simulated wave length is comparable to the wave tank's dimension, numerical results are found to be less than the experimental measurements. However, when the wave length is shorter than the tank's length, solutions are obtained with very good precision.
Applied Science, Faculty of
Mechanical Engineering, Department of
Graduate
APA, Harvard, Vancouver, ISO, and other styles
9

Liani, Evandro. "Potential Flow Based Aerodynamic and Aeroelastic Analysis of flapping Wings." Thesis, Cranfield University, 2008. http://hdl.handle.net/1826/3210.

Full text
Abstract:
The motivation for this research is the importance that the modeling of aerodynamics and aeroelasticity of flapping wings has had in the last decade. The development of flapping wings Micro Air Vehicles (MAV) has captured a huge interest in the recent past, due to the several disciplines involved in the subject. In this dissertation the attention is focused on the flow and its interactions with the structure. Even though experiments have had a fundamental role in the explanation of the aerodynamics around a flapping wing, it is widely accepted that a key aspect in the development of future flapping wings MAVs is the modeling. The aim of the project is to investigate different techniques for the development of a numerical framework used in the prediction of the unsteady aerodynamic forces on flapping wings. The understanding of the phenomena occurring on flapping wings is attempted first with very basic models. The research is carried out based on potential flow assumptions: the flow in initially treated as irrotational and inviscid. Although the assumptions are very strong, it is shown that the mechanisms of lift and thrust production can be described, together with the convection of the wake behind the wing. The limitation of potential flow models is the incapacity to describe flows that are separated over a large portion of the wing. The modeling of this issue is particularly important for flapping wings, where the separation is exploited in order tin increase the forces produced. The development of a Vortex Particle Method (VPM) is attempted, with wake elements released at each time step from all the panels of the airfoil. The advantage of Vortex Particle Methods over panel methods is that they represent more realistically the flow around the wing. The drawback is the greater complexity and longer running times. Aeroelasticity is discussed as well, as it is believed that the wing flexibility can enhance the performance of flapping wings. The thesis investigates the stability and response of an airfoil connected to a rotational and a linear spring at its elastic axis. Even though the structural model is very simple, it is shown that there might be advantages introducing a certain level of flexibility in the system. The framework built in this project is not aimed at giving an accurate representation of the forces produced by flapping wings. A methodology that allows to avoid CFD computations is deemed fundamental in the design phase of an aerial vehicle. The final goal of this project is the development of meshless techniques for the aerodynamic analysis of unsteady flows. An essential point that needs deep insight is their inaccuracy compared to CFD. Therefore considerations about the lack of accuracy and ways to improve it are made in order to show that there is a real advantage in the sue of grid-free methods. The results of the analysis are compared with other results found in the literature. In particular, experimental results are considered where possible, otherwise numerical computation shave been taken into account. The first part of the code has been developed in FORTRAN, due to its running time efficiency, while the second part has been developed in C++, because of its ability to handle more complex data structures.
APA, Harvard, Vancouver, ISO, and other styles
10

Hattersley, Nicola. "The potential of a seismic flow meter for mountain strams." Thesis, Bangor University, 2009. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.502744.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Potential flow"

1

1940-, Rahman M., ed. Potential flow of fluids. Southampton: Computational Mechanics Publications, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Salas, Manuel D. Breakdown of the conservative potential equation. Hampton, Va: Langley Research Center, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Dulikravich, George S. Theory of unsteady compressible irrotational flows including heat conductivity and longitudinal viscosity. New York: American Institute of Aeronautics and Astronautics, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

1936-, Puu Tönu, ed. Spatial economics: Density, potential, and flow. Amsterdam: North-Holland, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Beckmann, Martin. Spatial economics: Density, potential, and flow. Amsterdam: North-Holland, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Takallu, M. A. Unsteady potential flow past a propeller blade section. Hampton, Va: Langley Research Center, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Canada. Defence Research Establishment Atlantic. Calculation of Potential Flow About Ship Hulls. S.l: s.n, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Joseph, Daniel D. Potential flows of viscous and viscoelastic fluids. Cambridge: Cambridge University Press, 2007.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Summa, J. Michael. A novel potential viscous flow coupling technique for computing helicopter flow fields. Moffett Field, Calif: National Aeronautics and Space Administration, Ames Research Center, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Summa, J. Michael. A novel potential viscous flow coupling technique for computing helicopter flow fields. Moffett Field, Calif: National Aeronautics and Space Administration, Ames Research Center, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Potential flow"

1

Spurk, Joseph H. "Potential Flow." In Fluid Mechanics, 399–508. Berlin, Heidelberg: Springer Berlin Heidelberg, 1997. http://dx.doi.org/10.1007/978-3-642-58277-6_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Kawahara, Mutsuto. "Potential Flow." In Mathematics for Industry, 57–98. Tokyo: Springer Japan, 2016. http://dx.doi.org/10.1007/978-4-431-55450-9_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Brekhovskikh, Leonid M., and Valery Goncharov. "Potential Flow." In Springer Series on Wave Phenomena, 121–44. Berlin, Heidelberg: Springer Berlin Heidelberg, 1994. http://dx.doi.org/10.1007/978-3-642-85034-9_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Vreugdenhil, Cornelis B. "Potential Flow." In Computational Hydraulics, 137–42. Berlin, Heidelberg: Springer Berlin Heidelberg, 1989. http://dx.doi.org/10.1007/978-3-642-95578-5_19.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Brekhovskikh, Leonid, and Valery Goncharov. "Potential Flow." In Springer Series on Wave Phenomena, 121–44. Berlin, Heidelberg: Springer Berlin Heidelberg, 1985. http://dx.doi.org/10.1007/978-3-642-96861-7_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Sultanian, Bijay K., and Bijay K. Sultanian. "Potential Flow." In Fluid Mechanics and Turbomachinery, 101–21. Boca Raton: CRC Press, 2021. http://dx.doi.org/10.1201/9781003053996-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Kaushik, Mrinal. "Potential Flow Theory." In Theoretical and Experimental Aerodynamics, 107–26. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-1678-4_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Babu, V. "Potential Flows." In Fundamentals of Incompressible Fluid Flow, 59–89. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-74656-8_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Chorin, A. J., and J. E. Marsden. "Potential Flow and Slightly Viscous Flow." In Texts in Applied Mathematics, 47–103. New York, NY: Springer US, 1990. http://dx.doi.org/10.1007/978-1-4684-0364-0_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Chorin, Alexandre J., and Jerrold E. Marsden. "Potential Flow and Slightly Viscous Flow." In Texts in Applied Mathematics, 47–101. New York, NY: Springer New York, 1993. http://dx.doi.org/10.1007/978-1-4612-0883-9_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Potential flow"

1

Suchomel, Charles, John Cole, and Isaac Silvera. "High Speed Aircraft Range Potential of Metallic Hydrogen Fuel." In 4th Flow Control Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 2008. http://dx.doi.org/10.2514/6.2008-4003.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Mitsopoulos, I. D., and D. Mironidis. "Assessment of post fire debris flow potential in a Mediterranean type ecosystem." In DEBRIS FLOW 2006. Southampton, UK: WIT Press, 2006. http://dx.doi.org/10.2495/deb060211.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Minikeeva, A., and O. T. Gudmestad. "Parametric study of multiphase flow in potential Barents Sea pipelines from Fedyn Arch to shore." In MULTIPHASE FLOW 2013. Southampton, UK: WIT Press, 2013. http://dx.doi.org/10.2495/mpf130141.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Curtis, J. P., F. T. Smith, A. White, and N. J. Whitworth. "Stretching hollow jets in potential flow." In SHOCK COMPRESSION OF CONDENSED MATTER - 2017: Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter. Author(s), 2018. http://dx.doi.org/10.1063/1.5044941.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

CENKO, A., W. TSENG, and M. MADSON. "Potential flow applications to complex configurations." In 22nd Fluid Dynamics, Plasma Dynamics and Lasers Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1991. http://dx.doi.org/10.2514/6.1991-1634.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Maisenhalder, F. "High Power CO Lasers And Their Application Potential." In 7th Intl Symp on Gas Flow and Chemical Lasers, edited by Dieter Schuoecker. SPIE, 1989. http://dx.doi.org/10.1117/12.950506.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Wartemann, Viola, Alexander Wagner, and Thino Eggers. "Passive hypersonic boundary layer control: The Potential of an Ultrasonically Absorptive Ceramic for HEXAFLY-INT." In 8th AIAA Flow Control Conference. Reston, Virginia: American Institute of Aeronautics and Astronautics, 2016. http://dx.doi.org/10.2514/6.2016-4250.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Hafez, M., W. Guo, and D. Kinney. "Approximate methods for correcting potential flow calculations." In 16th AIAA Applied Aerodynamics Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1998. http://dx.doi.org/10.2514/6.1998-2633.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Healey, Christopher M., James W. VanGilder, Zachary R. Sheffer, and Xuanhang Simon Zhang. "Potential-Flow Modeling for Data Center Applications." In ASME 2011 Pacific Rim Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Systems. ASMEDC, 2011. http://dx.doi.org/10.1115/ipack2011-52136.

Full text
Abstract:
Potential-flow-based airflow and heat transfer models have been proposed as a computationally efficient alternative to the Navier-Stokes Equations for predicting the three-dimensional flow field in data center applications. These models are simple, solve quickly, and capture much of the fluid flow physics, but ignore buoyancy and frictional effects, i.e., rotationality, turbulence, and wall friction. However, a comprehensive comparison of the efficiency and accuracy of these methods versus more sophisticated tools, like CFD, is lacking. The main contribution of this paper is a study of the performance of potential-flow methods compared to CFD in eight layouts inspired by actual data center configurations. We demonstrate that potential-flow methods can be helpful in data center design and management applications.
APA, Harvard, Vancouver, ISO, and other styles
10

Benaouicha, M., E. Longatte, and F. Baj. "Stability of Cylinder Arrangement in Potential Flow." In ASME 2013 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/pvp2013-97661.

Full text
Abstract:
Fluid-structure interaction and flow-induced vibration in square cylinder arrangement under incompressible, ideal and irrotational cross flow are investigated in the present paper. The purpose of this study is to contribute to better understanding of external fluid loads exerted on long thin cylinders inducing the flow perturbations. Indeed, in presence of high flow confinement, the thin cylinders could be subjected to strong vibrations, which may lead to instability development and therefore to a risk of break or collision. The dynamic instability of the mobile tube, according to some geometric and flow parameters such as reduced velocity and pitch ratio, is then studied. A semi-analytical approach is used to determine a stability criterion of the dynamical system. In addition, the influence of key physical parameters on fluid-solid dynamics interaction is quantified in the studied configuration.
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Potential flow"

1

Greengard, L. Potential Flow in Channels. Fort Belvoir, VA: Defense Technical Information Center, July 1988. http://dx.doi.org/10.21236/ada198706.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Wallis, G. B. Two phase potential flow. Office of Scientific and Technical Information (OSTI), June 1991. http://dx.doi.org/10.2172/6213215.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Wallis, G. B. Two-Phase Potential Flow. Final report. Office of Scientific and Technical Information (OSTI), June 1999. http://dx.doi.org/10.2172/761114.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Pohlmann, K., and R. Andricevic. Identification of potential groundwater flow paths using geological and geophysical data. Office of Scientific and Technical Information (OSTI), September 1994. http://dx.doi.org/10.2172/60910.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Enderlin, W. I. The potential for air flow reduction in fume hoods at Hanford. Office of Scientific and Technical Information (OSTI), December 1988. http://dx.doi.org/10.2172/6877250.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Wallis, G. B. Two-phase potential flow. Final report, September 1, 1988--March 31, 1999. Office of Scientific and Technical Information (OSTI), July 1999. http://dx.doi.org/10.2172/353220.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Wallis, G. B. Two-phase potential flow. Progress report, July 1, 1992--June 30, 1993. Office of Scientific and Technical Information (OSTI), July 1993. http://dx.doi.org/10.2172/10108147.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Kumar, Rajan. Microfluidic Flow Retardation Device for Tagless Cancer Cell Analysis for Metastatic Potential. Fort Belvoir, VA: Defense Technical Information Center, July 2012. http://dx.doi.org/10.21236/ada566934.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Wallis, G. B. Two-phase potential flow. Progress report, July 1, 1993--June 1, 1994. Office of Scientific and Technical Information (OSTI), June 1994. http://dx.doi.org/10.2172/10120585.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Chen, Chu Y. Predictions of Transom Stern Hull Resistance by Two Potential Flow Panel Methods. Fort Belvoir, VA: Defense Technical Information Center, November 1989. http://dx.doi.org/10.21236/ada217949.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Potential flow' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography