Relevant bibliographies by topics / Plastic engineering (Engineering)

Academic literature on the topic 'Plastic engineering (Engineering)'

Author: Grafiati
Published: 4 June 2021
Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Contents

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Plastic engineering (Engineering).'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Plastic engineering (Engineering)"

1

Angel, Michael F. "Re-Engineering Plastic Surgery." Plastic and Reconstructive Surgery 110, no. 5 (October 2002): 1360–61. http://dx.doi.org/10.1097/01.prs.0000024454.91197.aa.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Angel, Michael F. "Re-Engineering Plastic Surgery." Plastic and Reconstructive Surgery 110, no. 5 (October 2002): 1360–61. http://dx.doi.org/10.1097/00006534-200210000-00028.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Orlov, G. A. "PLASTIC METAL WORKING ENGINEERING ASSESSMENT." Izvestiya Visshikh Uchebnykh Zavedenii. Chernaya Metallurgiya = Izvestiya. Ferrous Metallurgy 56, no. 3 (March 21, 2015): 11. http://dx.doi.org/10.17073/0368-0797-2013-3-11-14.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Sterodimas, Aris, Jose De Faria, Wanda Elizabeth Correa, and Ivo Pitanguy. "Tissue Engineering in Plastic Surgery." Annals of Plastic Surgery 62, no. 1 (January 2009): 97–103. http://dx.doi.org/10.1097/sap.0b013e3181788ec9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Babafemi, Adewumi, Branko Šavija, Suvash Paul, and Vivi Anggraini. "Engineering Properties of Concrete with Waste Recycled Plastic: A Review." Sustainability 10, no. 11 (October 25, 2018): 3875. http://dx.doi.org/10.3390/su10113875.

Full text
Abstract:
The abundance of waste plastic is a major issue for the sustainability of the environment as plastic pollutes rivers, land, and oceans. However, the versatile behavior of plastic (it is lightweight, flexible, strong, moisture-resistant, and cheap) can make it a replacement for or alternative to many existing composite materials like concrete. Over the past few decades, many researchers have used waste plastic as a replacement for aggregates in concrete. This paper presents a comprehensive review of the engineering properties of waste recycled plastic. It is divided into three sections, along with an introduction and conclusion. The influence of recycled waste plastics on the fresh properties of concrete is discussed first, followed by its influence on the mechanical and durability properties of concrete. Current experimental results have shown that the mechanical and durability properties of concrete are altered due to the inclusion of plastic. However, such concrete still fulfills the requirements of many engineering applications. This review also advocates further study of possible pre-treatment of waste plastic properties for the modification of its surface, shape, and size in order to improve the quality of the composite product and make its use more widespread.
APA, Harvard, Vancouver, ISO, and other styles
6

KANAI, HIDEO. "Engineering plastic materials for precise moldings." Journal of the Japan Society for Precision Engineering 52, no. 2 (1986): 224–30. http://dx.doi.org/10.2493/jjspe.52.224.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

TREMBLAY, JEAN-FRANÇOIS. "A NEW ENGINEERING PLASTIC FROM CHINA." Chemical & Engineering News 88, no. 31 (August 2, 2010): 28–30. http://dx.doi.org/10.1021/cen-v088n031.p028.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Yamaoka, H., K. Miyata, and O. Yano. "Cryogenic properties of engineering plastic films." Cryogenics 35, no. 11 (November 1995): 787–89. http://dx.doi.org/10.1016/0011-2275(95)90915-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Schowalter, Leo J. "Substrate Engineering With Plastic Buffer Layers." MRS Bulletin 21, no. 4 (April 1996): 45–49. http://dx.doi.org/10.1557/s0883769400035338.

Full text
Abstract:
The advantage that epitaxy offers the electronics and optoelectronics industries is that it allows the possibility of producing precisely controlled layers of very high crystal quality. Heteroepitaxy of different materials offers the promise of tailoring device layers in clever ways that nature did not intend. However unlike fruit juices, nature has made it difficult to epitaxially combine different materials. As the preceding articles have clearly pointed out, it is very difficult to obtain smooth epitaxial layers that are free both of defects and strain when there is a lattice mismatch between the layers and their substrates.As already discussed in this issue, a uniform network of dislocations at the interface between a flat, uniform epitaxial layer and its substrate can completely relieve strain in the majority of the epitaxial layer. This would be a satisfactory situation for many devices so long as the active region of the device could be kept away from the interface. The problem is how to introduce the dislocations in an appropriate way. When an epitaxial layer has a larger lattice parameter than the underlying substrate, a misfit dislocation running along the interface represents a plane of atoms that has been removed from the epitaxial layer. (One would insert a plane of atoms if the epitaxial lattice parameter was smaller. For simplicity however we will continue to assume that the epitaxial layer has a larger lattice parameter.) It is not possible for a whole half plane of atoms, bounded by the dislocation at the interface and the substrate edges along the two sides, to be removed at once. The boundary between where the extra plane of atoms has been removed and where the epitaxial layer has not relaxed yet will represent a threading dislocation. This threading dislocation would continue to move as the size of the misfit dislocation along the interface grows. Ideally it moves all the way out to the substrate edge and vanishes there while the misfit dislocation along the interface would end up extending from one side of the substrate to the other. However other dislocations and other kinds of defects can effectively pin the threading dislocation resulting in an epitaxial layer with many threading dislocations. Unfortunately these threading dislocations are generally detrimental to most kinds of devices. It is precisely this high density of threading dislocations that limits applications of many heteroepitaxial layers.
APA, Harvard, Vancouver, ISO, and other styles
10

Walgenbach, Klaus-J., Mathias Voigt, Artiom W. Riabikhin, Christoph Andree, Dirk J. Schaefer, Thomas J. Galla, and G. Bj�rn Stark. "Tissue engineering in plastic reconstructive surgery." Anatomical Record 263, no. 4 (2001): 372–78. http://dx.doi.org/10.1002/ar.1117.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Plastic engineering (Engineering)"

1

LINDSTRAND, NILS, and KARL THUNELL. "From Plastic to Paper Mapping the real cost of plastics." Thesis, KTH, Skolan för industriell teknik och management (ITM), 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-224931.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Kang, JiJun. "Determination of elastic-plastic and visco-plastic material properties from instrumented indentation curves." Thesis, University of Nottingham, 2013. http://eprints.nottingham.ac.uk/13509/.

Full text
Abstract:
Instrumented indentation techniques at micro or nano-scales have become more popular for determining mechanical properties from small samples of material. These techniques can be used not only to obtain and to interpret the hardness of the material but also to provide information about the near surface mechanical properties and deformation behaviour of bulk solids and/or coating films. In particular, various approaches have been proposed to evaluate the elastic-plastic properties of power-law materials from the experimental loading-unloading curves. In order to obtain a unique set of elastic-plastic properties, many researchers have proposed to use more than one set of loading-unloading curves obtained from different indenter geometries. A combined Finite Element (FE) analysis and optimisation approach has been developed, using three types of indenters (namely, conical, Berkovich and Vickers), for determining the elastic-plastic material properties, using one set of ‘simulated’ target FE loading-unloading curves and one set of real-life experimental loading-unloading curves. The results obtained have demonstrated that excellent convergence can be achieved with the ‘simulated’ target FE loading-unloading curve, but less accurate results have been obtained with the real-life experimental loading-unloading curve. This combined technique has been extended to determine the elastic and visco-plastic material properties using only a single indentation ‘simulated’ loading-unloading curve based on a two-layer viscoplasticity model. A combined dimensional analysis and optimisation approach has also been developed and used to determine the elastic-plastic material properties from loading-unloading curves with single and dual indenters. The dimensional functions have been established based on a parametric study using FE analyses and the loading and linearised unloading portions of the indentation curves. It has been demonstrated that the elastic-plastic material properties cannot be uniquely determined by the test curves of a single indenter, but the unique or more accurate results can be obtained using the test curves from dual indenters. Since the characteristic loading-unloading responses of indenters can be approximated by the results of dimensional analysis, a simplified approach has been used to obtain the elastic-plastic mechanical properties from loading-unloading curves, using a similar optimisation procedure. It is assumed that the loading-unloading portions of the curves are empirically related to some of the material properties, which avoids the need for time consuming FE analysis in evaluating the load-deformation relationship in the optimisation process. This approach shows that issues of uniqueness may arise when using a single indenter and more accurate estimation of material properties with dual indenters can be obtained by reducing the bounds of the mechanical parameters. This thesis highlights the effects of using various indenter geometries with different face angles and tilted angles, which have not been covered previously. The elastic-plastic material parameters are estimated, for the first time, in a non-linear optimisation approach, fully integrated with FE analysis, using results from a single indentation curve. Furthermore, a linear and a power-law fitting scheme to obtain elastic-plastic material properties from loading-unloading indentation curves have been introduced based on dimensional analysis, since there are no mathematical formulas or functions that fit the unloading curve well. The optimisation techniques have been extended to cover time-dependent material properties based on a two-layer viscoplasticity model, has not been investigated before.
APA, Harvard, Vancouver, ISO, and other styles
3

Huss, Fredrik R. M. "In vitro and in vivo studies of tissue engineering in reconstructive plastic surgery." Doctoral thesis, Linköpings universitet, Brännskadevård, 2005. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-8504.

Full text
Abstract:
To correct, improve, and maintain tissues, and their functions, are common denominators in tissue engineering and reconstructive plastic surgery. This can be achieved by using autolo-gous tissues as in flaps or transplants. However, often autologous tissue is not useable. This is one of the reasons for the increasing interest among plastic surgeons for tissue engineering, and it has led to fruitful cross-fertilizations between the fields. Tissue engineering is defined as an interdisciplinary field that applies the principles of engineering and life sciences for development of biologic substitutes designed to maintain, restore, or improve tissue functions. These methods have already dramatically improved the possibilities to treat a number of medical conditions, and can arbitrarily be divided into two main principles: > Methods where autologous cells are cultured in vitro and transplanted by means of a cell suspension, a graft, or in a 3-D biodegradable matrix as carrier. > Methods where the tissue of interest is stimulated and given the right prerequisites to regenerate the tissue in vivo/situ with the assistance of implantation of specially designed materials, or application of substances that regulate cell functions - guided tissue regeneration. We have shown that human mammary epithelial cells and adipocytes could be isolated from tissue biopsies and that the cells kept their proliferative ability. When co-cultured in a 3-D matrix, patterns of ductal structures of epithelial cells embedded in clusters of adipocytes, mimicking the in vivo architecture of human breast tissue, were seen. This indicated that human autologous breast tissue can be regenerated in vitro. The adipose tissue is also generally used to correct soft tissue defects e.g. by autologous fat transplantation. Alas 30-70% of the transplanted fat is commonly resorbed. Preadipocytes are believed to be hardier and also able to replicate, and hence, are probably more useful for fat transplantation. We showed that by using cell culture techniques, significantly more pre-adipocytes could survive and proliferate in vitro compared to two clinically used techniques of fat graft handling. Theoretically, a biopsy of fat could generate enough preadipocytes to seed a biodegradable matrix that is implanted to correct a defect. The cells in the matrix will replicate at a rate that parallels the vascular development, the matrix subsequently degrades and the cell-matrix complex is replaced by regenerated, vascularized adipose tissue. We further evaluated different biodegradable scaffolds usable for tissue engineering of soft tissues. A macroporous gelatin sphere showed several appealing characteristics. A number of primary human ecto- and mesodermal cells were proven to thrive on the gelatin spheres when cultured in spinner flasks. As the spheres are biodegradable, it follows that the cells can be cultured and expanded on the same substrate that functions as a transplantation vehicle and scaffold for tissue engineering of soft tissues. To evaluate the in vivo behavior of cells and gelatin spheres, an animal study was performed where human fibroblasts and preadipocytes were cultured on the spheres and injected intra-dermally. Cell-seeded spheres were compared with injections of empty spheres and cell suspensions. The pre-seeded spheres showed a near complete regeneration of the soft tissues with neoangiogenesis. Some tissue regeneration was seen also in the ‘naked’ spheres but no effect was shown by cell injections. In a human pilot-study, intradermally injected spheres were compared with hyaluronan. Volume-stability was inferior to hyaluronan but a near complete regeneration of the dermis was proven, indicating that the volume-effect is permanent in contrast to hyaluronan which eventually will be resorbed. Further studies are needed to fully evaluate the effect of the macroporous gelatin spheres, with or without cellular pre-seeding, as a matrix for guided tissue regeneration. However, we believe that the prospect to use these spheres as an injectable, 3D, biodegradable matrix will greatly enhance our possibilities to regenerate tissues through guided tissue regeneration.
On the day of the defence date the status of article V was In Press.
APA, Harvard, Vancouver, ISO, and other styles
4

Toor, A. P. S. "Biaxial cyclic plastic bending." Thesis, Coventry University, 1986. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.372393.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Fredriksson, Camilla. "Keratinocytes in tissue engineering of human skin: invitro and in vivo studies." Licentiate thesis, Linköping University, Linköping University, Plastic Surgery, Hand Surgery and Burns, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-21283.

Full text
Abstract:

Full thickness wounds, such as deep burns, need restoration of both the dermal and epidermal layers of the skin. In normal wound healing, re-epithelialization occurs by migration and proliferation of keratinocytes from the wound edges and by differentiation of stem cells from remaining hair follicles. Restoration of dermis occurs by influx of growth factors secreted by macrophages, platelets, and fibroblasts; by fibroblast proliferation and subsequent synthesis and remodeling of collagenous dermal matrix. In the case of full-thickness acute burn injuries and chronic wounds (e.g. pressure ulcers, venous ulcers and diabetic foot ulcers), these processes are defective. With the principles of tissue engineering in mind (to correct, improve and maintain tissues and their functions), researchers have developed promising materials and methods to make it possible to restore either the dermal (Integra® DRT, Alloderm®) or the epidermal layer (split thickness skin grafts (STSG), cultured epithelial autografts (CEA), autologous keratinocytes in single cell suspension). It is now well established that superior results are obtained if both dermal and epidermal components are combined, for example in a bilayered skin equivalent. Apligraf® is recommended for use on venous ulcers and is the only bilayered living skin equivalent currently approved by the FDA. Studies on different factors affecting the wound healing capacity as well as techniques in use provide valuable information for further development.

In this licentiate thesis, we evaluated different transplantation techniques for delivering cultured human keratinocytes in single cell suspension, a measure becoming more frequently used in addition to STSG and CEA for restoring the epidermal layer of the skin. We found that the pressure device, commonly used to spray cell suspension onto the wound with pressures as high as 200 kPa, killed around 0% of the cells. In comparison, an ordinary syringe with the attachment of a spray nozzle showed almost 90% viable cells post transplantation and provided an equally good distribution of the cell suspension.

We also studied different silver containing dressings regarding silver accumulation in human skin. In addition, we graded the re-epithelialization to evaluate whether the dressings caused any delay in the wound healing process. We found that the silver dressings tested, with few exceptions, caused dermal accumulation of silver, primarily aggregated around blood vessels. We could also show that most of the dressings had negative effect on the re-epithelialization.

For the restoration of the dermal layer of the skin, Integra® DRT functions as a scaffold for guided tissue regeneration of the dermis. We had the possibility to study a case of necrotizing fasciitis were the treatment consisted of the use of Integra® DTR together with sub-atmospheric pressure (after initial surgical debridement) and later transplantation of split thickness skin grafts. This measure proved to be safe as well as giving satisfactory pliable and aesthetically acceptable result.

APA, Harvard, Vancouver, ISO, and other styles
6

Sayahi, Faez. "Plastic Shrinkage Cracking in Concrete." Licentiate thesis, Luleå tekniska universitet, Institutionen för samhällsbyggnad och naturresurser, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-133.

Full text
Abstract:
Early-age (up to 24 hours after casting) cracking may become problematic in any concrete structure. It can damage the aesthetics of the concrete member and decrease the durability and serviceability by facilitating the ingress of harmful material. Moreover, these cracks may expand gradually during the member’s service-life due to long-term shrinkage and/or loading. Early-age cracking is caused by two driving forces: 1) plastic shrinkage cracking which is a physical phenomenon and occurs due to rapid and excessive loss of moisture, mainly in form of evaporation, 2) chemical reactions between cement and water which causes autogenous shrinkage. In this PhD project only the former is investigated. Rapid evaporation from the surface of fresh concrete causes negative pressure in the pore system. This pressure, known as capillary pressure, pulls the solid particles together and decreases the inter-particle distances, causing the whole concrete element to shrink. If this shrinkage is hindered in any way, cracking may commence. The phenomenon occurs shortly after casting the concrete, while it is still in the plastic stage (up to around 8 hours after placement), and is mainly observed in concrete elements with high surface to volume ratio such as slabs and pavements. Many parameters may affect the probability of plastic shrinkage cracking. Among others, effect of water/cement ratio, fines, admixtures, geometry of the element, ambient conditions (i.e. temperature, relative humidity, wind velocity and solar radiation), etc. has been investigated in previous studies. In this PhD project at Luleå University of Technology (LTU), in addition to studying the influence of various parameters, effort is made to reach a better and more comprehensive understanding about the cracking governing mechanism. Evaporation, capillary pressure development and hydration rate are particularly investigated in order to define their relationship. This project started with intensive literature study which is summarized in Papers I and II. Then, the main objective was set upon which series of experiments were defined. The utilized methods, material, investigated parameters and results are presented in Papers III and IV. It has been so far observed that evaporation is not the only driving force behind the plastic shrinkage cracking. Instead a correlation between evaporation, rate of capillary pressure development and the duration of dormant period governs the phenomenon. According to the results, if rapid evaporation is accompanied by faster capillary pressure development in the pore system and slower hydration, risk of plastic shrinkage cracking increases significantly.
APA, Harvard, Vancouver, ISO, and other styles
7

Donkin, Richard Philip. "Plastic photovoltaic roof tiles." Thesis, Stellenbosch : University of Stellenbosch, 2009. http://hdl.handle.net/10019.1/4397.

Full text
Abstract:
Thesis presented in partial fulfilment of the requirements for the degree of Master of Engineering in Renewable and Sustainable Energy at the Stellenbosch University.
Thesis (MScEng (Mechanical and Mechatronic Engineering))--University of Stellenbosch, 2009.
ENGLISH ABSTRACT: This project investigated the feasibility of incorporating photovoltaic cells into plastic roof tiles using injection moulding. Such tiles have the potential to provide robust and distributed electricity contained within the building envelope. Current-voltage curves of amorphous silicon modules were measured under illumination using the PVPM 2540C power measuring instrument, both before and after moulding. The efficiency after moulding was reduced by 53% to 88%, with modules that were heated for longer being degraded more. Thus the duration of exposure to high temperatures affected the extent of performance reduction during moulding. This suggested that faster moulding at a lower temperature or faster cooling could solve the problem. Economic feasibility was examined by calculating the levellised cost of electricity provided by the tiles. A large-scale development in the Western Cape was simulated using a typical meteorological year of weather data and using the anisotropic diffuse irradiance model of Perez et al. (1988). Avoided costs due to replaced roofing, avoided costs due to electricity distribution infrastructure, and Clean Development Mechanism credits were accounted for. The cost of energy calculated was R11/kWh in 2010 rands, which did not compete with the price of conventional grid-based electricity at R1.8/kWh. The importance of the cost of balance-of-system components, such as the inverter, and not only of the photovoltaic modules, was highlighted for future cost reductions. Several clear guidelines for manufacturing photovoltaic roof tiles were discovered. The most important of these was that many bypass diodes make the system more robust.
AFRIKAANSE OPSOMMING: Hierdie projek het die haalbaarheid van die integrasie van fotovoltaïse selle in plastiek dakteëls deur spuitvorming ondersoek. Sulke dakteëls het die vermoë om robuuste en verspreide elektrisiteit te lewer, sonder om die gebou se vorm te verander. Stroom-spanning kurwes van struktuurlose silikon eenhede is onder verligting gemeet met die PVPM 2540C kragmeet instrument, voor en na spuitvorming. Die doeltreffendheid na spuitvorming is met 53% tot 88% verminder, met groter vermindering in die eenhede wat langer warm was. Dus het die duur van blootstelling aan hoë temperature die mate van vermindering van doeltreffendheid beïnvloed. Dit het suggereer dat óf vinniger spuitvorming by laer temperature óf vinniger verkoeling die probleem kan oplos. Ekonomiese haalbaarheid is ondersoek deur die koste van die elektrisiteit wat deur die dakteëls gelewer is te bereken. ’n Groot behuisingsontwikkeling in die Wes-Kaap is gesimuleer deur ’n tipiese weerkundige jaar van weerdata en die anisotroop model vir verspreide ligstraling van Perez et al. (1988) te gebruik. Vermyde kostes van vervangde dakteëls, vermyde kostes van elektrisiteit distribusie infrastruktuur en krediete van die Meganisme vir Skoonontwikkeling is in ag geneem. Die elektrisiteitskoste was R11/kWh in 2010 se randwaarde, wat nie mededingend met die R1.8/kWh koste van gewone netwerk elektrisiteit was nie. Die belang van die kostes van die res van die installasieonderdele, soos die wisselrigter, en nie net die fotovoltaïse eenhede nie, is beklemtoon vir kostevermindering in die toekoms. Verskeie duidelike riglyne vir die vervaardiging van fotovoltaïse dakteëls is voorgestel. Die belangrikste van hierdie was dat meer omloopdiodes die installasie meer robuust maak.
Centre for Renewable and Sustainable Energy Studies
APA, Harvard, Vancouver, ISO, and other styles
8

Derradji-Aouat, Ahmed. "Evaluation of Prevost's elasto-plastic models." Thesis, University of Ottawa (Canada), 1988. http://hdl.handle.net/10393/5545.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Nowzartash, Farhood. "Elasto-plastic finite element for pipelines." Thesis, University of Ottawa (Canada), 2002. http://hdl.handle.net/10393/6180.

Full text
Abstract:
An efficient pipe element for the modeling of the inelastic behaviour of three-dimensional pipes is presented. The formulation is based on a two-node element with twelve degrees of freedom. The element consists of an elastic portion and two potentially plastic generalized 3D hinges located at both nodes. The formulation is based on a lumped plasticity approach. The behaviour of plastic hinges is characterized using recently developed interaction relations for pipe sections. The interaction relations are exact and include the effects of axial force, bi-axial bending moments, bi-axial shear, torsion and internal and/or external pressure. The element models shear deformation effects both in the elastic and plastic ranges. Therefore, it is suitable for predicting the behaviour of pipe segments subject to high shear forces. The analysis is implemented using the displacement control scheme in order to capture the peak point of the load deformation response without numerical difficulty. The normality condition concept in conjunction with the yield hyper-surface at stress resultant level is used to approximately simulate the material nonlinearity effects. The developed technique models material nonlinearity in a very efficient way when compared to full 3D or shell finite element analysis. The model is thus particularly suitable for long pipeline systems. Solutions for simple problems are provided and compared to several other well-established elements in the ABAQUS(TM) library in order to assess the validity of the results and demonstrate their scope of applicability. A discussion of additional features that can be added to the analysis is also presented.
APA, Harvard, Vancouver, ISO, and other styles
10

Li, Wing-Jin [Verfasser], Lars Mathias [Akademischer Betreuer] Blank, and Nick [Akademischer Betreuer] Wierckx. "Plastic monomer degradation - Engineering Pseudomonas putida KT2440 for plastic monomer utilization / Wing Jin Li ; Lars M. Blank, Nick Wierckx." Aachen : Universitätsbibliothek der RWTH Aachen, 2019. http://d-nb.info/1217256997/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Plastic engineering (Engineering)"

1

Engineers, Society of Automotive, ed. Engineering plastics and plastic composites in automotive applications. Warrendale, Pa: SAE International, 2009.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Sehanobish, Kalyan. Engineering Plastics and Plastic Composites in Automotive Applications. Warrendale, PA: SAE International, 2009. http://dx.doi.org/10.4271/t-122.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Sehanobish, Kalyan. Engineering Plastics and Plastic Composites in Automotive Applications. Warrendale, PA: SAE International, 2009. http://dx.doi.org/10.4271/0768056462.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Basic engineering plasticity: An introduction with engineering and manufacturing applications. Boston, MA: Elsevier, 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Palmov, Vladimir. Vibrations of Elasto-Plastic Bodies. Berlin, Heidelberg: Springer Berlin Heidelberg, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Plasticity: Theory and engineering applications. Amsterdam: Elsevier, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Plasticity: Theory and engineering applications. Budapest: Akadémiai Kiadó, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Stachiw, Jerry D. Ocean engineering studies. San Diego, Calif: Naval Ocean Systems Center, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Campbell, Paul D. Q. Plastic component design. New York: Industrial Press, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Segal, V. M. Fundamentals and engineering of severe plastic deformation. Hauppauge, N.Y: Nova Science Publishers, 2009.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Plastic engineering (Engineering)"

1

Gooch, Jan W. "Engineering Plastic." In Encyclopedic Dictionary of Polymers, 269. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_4422.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Kern, Michael L., Stanley E. Eppert, James P. Parr, and Eckard F. H. Raddatz. "Engineering Plastics." In Plastic Blow Molding Handbook, 409–30. Dordrecht: Springer Netherlands, 1990. http://dx.doi.org/10.1007/978-94-011-6988-2_20.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Pharaon, Michael R., Thomas Scholz, and Gregory R. D. Evans. "Tissue Engineering." In Plastic and Reconstructive Surgery, 137–57. London: Springer London, 2010. http://dx.doi.org/10.1007/978-1-84882-513-0_12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Bruder, Ulf. "Engineering Polymers." In User's Guide to Plastic, 19–26. München: Carl Hanser Verlag GmbH & Co. KG, 2015. http://dx.doi.org/10.3139/9781569905739.003.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Bruder, Ulf. "Engineering Polymers." In User's Guide to Plastic, 23–35. München: Carl Hanser Verlag GmbH & Co. KG, 2019. http://dx.doi.org/10.3139/9781569907351.003.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Yildirimer, Lara, and Alexander Seifalian. "Tissue engineering." In Plastic and reconstructive surgery, 62–76. Chichester, UK: John Wiley & Sons, Ltd, 2015. http://dx.doi.org/10.1002/9781118655412.ch7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Chakrabarty, J. "Plastic Anisotropy." In Mechanical Engineering Series, 405–77. Boston, MA: Springer US, 2009. http://dx.doi.org/10.1007/978-0-387-77674-3_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Chakrabarty, J. "Plastic Buckling." In Mechanical Engineering Series, 479–559. Boston, MA: Springer US, 2009. http://dx.doi.org/10.1007/978-0-387-77674-3_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Chakrabarty, J. "Plastic Anisotropy." In Mechanical Engineering Series, 387–458. New York, NY: Springer New York, 2000. http://dx.doi.org/10.1007/978-1-4757-3268-9_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Chakrabarty, J. "Plastic Buckling." In Mechanical Engineering Series, 459–537. New York, NY: Springer New York, 2000. http://dx.doi.org/10.1007/978-1-4757-3268-9_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Plastic engineering (Engineering)"

1

Shiri, Noel Deepak, Myriam Shankar Krafft, and Wolfram Thurm. "Plastic lumber product development using commingled waste plastics." In EMERGING TRENDS IN MECHANICAL ENGINEERING 2018. Author(s), 2019. http://dx.doi.org/10.1063/1.5092935.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Lee, Wei F., Chun-Chi Chen, Jing-Wen Chen, and Kenji Ishihara. "Engineering Properties of Non-Plastic Silty Sand." In Geo-Congress 2013. Reston, VA: American Society of Civil Engineers, 2013. http://dx.doi.org/10.1061/9780784412770.028.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kawahito, Yousuke, Yusuke Niwa, and Seiji Katayama. "Laser direct joining of ceramic and engineering plastic." In ICALEO® 2009: 28th International Congress on Laser Materials Processing, Laser Microprocessing and Nanomanufacturing. Laser Institute of America, 2009. http://dx.doi.org/10.2351/1.5061554.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Kuttner, B. C. "Computer-Aided Plastic Engineering at Ford Motor Co." In SAE International Congress and Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1985. http://dx.doi.org/10.4271/850447.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Schaub, Michael P. "Tolerancing molded plastic optics." In SPIE Optical Engineering + Applications, edited by José Sasián and Richard N. Youngworth. SPIE, 2011. http://dx.doi.org/10.1117/12.896715.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Bourque, David. "Manufacturing plastic injection optical molds." In Optical Engineering + Applications, edited by R. John Koshel, G. Groot Gregory, James D. Moore, Jr., and David H. Krevor. SPIE, 2008. http://dx.doi.org/10.1117/12.798467.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Collignon, Beno, Jean Vanderdonckt, and Ga Calvary. "Model-Driven Engineering of Multi-target Plastic User Interfaces." In 2008 Fourth International Conference on Autonomic and Autonomous Systems (ICAS). IEEE, 2008. http://dx.doi.org/10.1109/icas.2008.37.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Elsharafi, Mahmoud, Cody Chancellor, Cameron Duckworth, Moiz Tatla, Reuben Denwe, Okan Lafleur, Zhiqi Mao, Mohamed Azzouz, and Sheldon Wang. "Heat Transfer Technology to Convert Plastic Trash to Oil." In ASME 2017 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/imece2017-70953.

Full text
Abstract:
In modern society, plastic waste has become a serious environmental issue. The inability of most hydrocarbon based plastics to naturally decompose quickly causes concern. The material piles up in landfills, waterways, and along the side of the road. One way to combat this issue is the repurposing of the material. Plastic can be converted back into oil (called pyrolysis) and refined to produce fuels. To attempt this, a custom-built steel reactor is to be filled with waste plastic, and will be heated to the plastic’s boiling point in an inert (N2) environment. The resulting vapor will be recondensed in a specially designed heat exchanger, resulting in oil, wax, and gaseous byproducts. The oil and waxes are collected in one container, and the gases are collected in a separate container. The system will require the use of thermocouples and a feedback loop to properly control temperature. The results are expected to show a correlation between plastic type and resulting byproduct composition with Grade 1 plastics producing the most gas. In addition, faster heating rates, larger plastic particle size, and higher temperatures should increase gaseous products. This may aid in the creation of commercial/industrial sized pyrolysis systems.
APA, Harvard, Vancouver, ISO, and other styles
9

Bernheim, Edward A. "Coatings for plastic and glass." In Optical Engineering Midwest '95. SPIE, 1995. http://dx.doi.org/10.1117/12.216802.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

van Loef, Edgar V., Patrick Feng, Gary Markosyan, Urmila Shirwadkar, Patrick Doty, and Kanai S. Shah. "High energy resolution plastic scintillator." In SPIE Optical Engineering + Applications, edited by Ralph B. James, Michael Fiederle, Arnold Burger, and Larry Franks. SPIE, 2016. http://dx.doi.org/10.1117/12.2237999.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Plastic engineering (Engineering)"

1

McIntosh, Jr, and A. C. Engineering Test of Pro-Form Material Handling Division of L.T. Hample Corporation 4,000-Pound Steel Reinforced Plastic Pallet. Fort Belvoir, VA: Defense Technical Information Center, May 1988. http://dx.doi.org/10.21236/ada207023.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Scott, J., and R. Brady. Mechanical testing of selected engineering plastics. Office of Scientific and Technical Information (OSTI), January 1990. http://dx.doi.org/10.2172/6952346.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Cavestri, R. C. Compatibility of refrigerants and lubricants with engineering plastics. Office of Scientific and Technical Information (OSTI), July 1992. http://dx.doi.org/10.2172/7048879.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Cavestri, R. C. Compatibility of refrigerants and lubricants with engineering plastics. Office of Scientific and Technical Information (OSTI), January 1993. http://dx.doi.org/10.2172/6771970.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Cavestri, R. C. Compatibility of refrigerants and lubricants with engineering plastics. Final report. Office of Scientific and Technical Information (OSTI), December 1993. http://dx.doi.org/10.2172/10113619.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Cavestri, R. C. Compatibility of refrigerants and lubricants with engineering plastics. Quarterly report, 1 April 1992--30 June 1992. Office of Scientific and Technical Information (OSTI), July 1992. http://dx.doi.org/10.2172/10183600.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Papoutsakis, Eleftherios. Engineering Complex Microbial Phenotypes with Continuous Genetic Integration and Plasmid Based Multi-Gene Library. Fort Belvoir, VA: Defense Technical Information Center, January 2010. http://dx.doi.org/10.21236/ada548874.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Cavestri, R. C. Compatibility of refrigerants and lubricants with engineering plastics. Quarterly technology progress reports, 1 July 1992--30 September 1992 [and] 1 October 1992--31 December 1992. Office of Scientific and Technical Information (OSTI), January 1993. http://dx.doi.org/10.2172/10123893.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Plastic engineering (Engineering)' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography