Relevant bibliographies by topics / Planning and Design phases

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Planning and Design phases'

Author: Grafiati
Published: 24 June 2021
Last updated: 6 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Planning and Design phases.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Planning and Design phases"

1

Sacks, Rafael, and Abraham Warszawski. "A project model for an automated building system: design and planning phases." Automation in Construction 7, no. 1 (December 1997): 21–34. http://dx.doi.org/10.1016/s0926-5805(97)00034-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Yang, Jyh-Bin, and Pei-Rei Wei. "Causes of Delay in the Planning and Design Phases for Construction Projects." Journal of Architectural Engineering 16, no. 2 (June 2010): 80–83. http://dx.doi.org/10.1061/(asce)1076-0431(2010)16:2(80).

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Mattern, Hannah, and Markus König. "BIM-based modeling and management of design options at early planning phases." Advanced Engineering Informatics 38 (October 2018): 316–29. http://dx.doi.org/10.1016/j.aei.2018.08.007.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Terro, Mohamad Jamil, Ashraf Mohamed Soliman, and Jerrell Angell. "TAXONOMY OF TERTIARY EDUCATION CAMPUS PLANNING." JOURNAL OF ARCHITECTURE AND URBANISM 45, no. 1 (February 8, 2021): 19–37. http://dx.doi.org/10.3846/jau.2021.13514.

Full text
Abstract:
This paper aims to present and discuss phases of planning and designing campuses for Higher Education Institutions (HEIs). The authors argue that creating a taxonomy to control an environment conducive to learning is of the same order of importance as that for education as depicted by Bloom, given the size, financial burden, and influence on learning outcomes. A specific model is proposed for the taxonomy of planning campuses for HEIs with four ordered phases: educational programming, spaces programming, master planning, and detailed design. The researchers followed four methodologies to support the proposed model: A literature review to seek relevant knowledge and terms used in previous studies; a descriptive discussion of the proposed campus planning and design taxonomy model; a survey of experts in educational and campus planning to examine the proposed phases; and, a case study of the campus of Kingdom University in Bahrain where the phases of taxonomy were implemented. This latter case study further exhibits how the executed campus planning process is developed in adherence with state-of-the-art educational demands and trends. This paper is concluded with guidelines of HEIs campus planning as illustrated a diagram for the proposed model of taxonomy showing the process and illustrating the model domains, together with its phases and planning process considerations. The model also analyses the relationship between the domains that are ordered according to the process flow starting with educational programming up to the detailed design phases.
APA, Harvard, Vancouver, ISO, and other styles
5

Abdelhameed, Wael A. "Creativity in the Initial Phases of Architectural Design." Open House International 42, no. 1 (March 1, 2017): 29–34. http://dx.doi.org/10.1108/ohi-01-2017-b0005.

Full text
Abstract:
Creativity is viewed as vital for all design actions; however, creativity in general with its related cognition processes has no general theory. Creativity used in architectural design is different than creativity in other domains. This research proposes certain activities of the initial phases of architectural design, in which the role of creativity is distinguished. The research proceeds to present a case study of two architectural design studios in which a VR environment is employed in order to in-vestigate the effect of VR use on the creativity in those design phases. A methodol-ogy of qualitative and quantitative analysis has applied. Various architectural design factors are neutralized to overcome the influence generated from human factors variation and design thinking prejudice in architectural design and the associated ac-tivities.
APA, Harvard, Vancouver, ISO, and other styles
6

Inggs, Michael, Craig Tong, Roaldje Nadjiasngar, Gunther Lange, Amit Mishra, and Francois Maasdorp. "Planning and design phases of a commensal radar system in the FM broadcast band." IEEE Aerospace and Electronic Systems Magazine 29, no. 7 (July 2014): 50–63. http://dx.doi.org/10.1109/maes.2014.130165.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Steimer, Chantal, Jan Fischer, and Jan C. Aurich. "Model-based Design Process for the Early Phases of Manufacturing System Planning using SysML." Procedia CIRP 60 (2017): 163–68. http://dx.doi.org/10.1016/j.procir.2017.01.036.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Peart, J. W., L. L. Jaekel, M. Noma, K. Kobuhe, and I. Hirota. "Shipyard Design and Planning for a Zone-Oriented Painting System." Journal of Ship Production 1, no. 03 (August 1, 1985): 192–210. http://dx.doi.org/10.5957/jsp.1985.1.3.192.

Full text
Abstract:
Shipbuilding is a multifaceted industry requiring the coordination of many activities and relying on ever-evolving technology. Painting is an integral and costly part of this operation. This paper describes the Zone Painting Method, a new concept in ship construction which is based on the Product Work Breakdown Structure. The essence of the Zone Painting Method is proper planning and scheduling in coordination with hull construction and outfitting. Design and planning structures, as related to zone painting, are presented. Departmental responsibilities for those segments of the shipyard organization which impact painting are detailed. Finally, the planning process according to the three phases of contract planning, system planning and zone planning is delineated.
APA, Harvard, Vancouver, ISO, and other styles
9

Steimer, Chantal, and Jan C. Aurich. "Analysis of Information Interdependencies Between Product Development and Manufacturing System Planning in Early Design Phases." Procedia CIRP 50 (2016): 460–65. http://dx.doi.org/10.1016/j.procir.2016.04.134.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Rosa, Maiara, Wei Min Wang, Rainer Stark, and Henrique Rozenfeld. "A concept map to support the planning and evaluation of artifacts in the initial phases of PSS design." Research in Engineering Design 32, no. 2 (February 13, 2021): 189–223. http://dx.doi.org/10.1007/s00163-021-00358-9.

Full text
Abstract:
AbstractDesigning Product-Service Systems (PSS) is associated with multiple problems and challenges, usually derived from its multidisciplinarity and partially intangible nature. One particular issue is the high likelihood of ignoring the creation of relevant information regarding one or more PSS elements during the early design phases. Proceeding to later stages (e.g., detailed design) without generating the required information regarding all PSS elements and their relationships may lead to rework and lack of integration. Dealing with this problem requires adequate planning and evaluation of the artifacts (such as documents and models) created in the initial design phases. As a fundamental theoretical basis to support the creation of solutions that may help project managers dealing with this challenge, this paper presents a concept map to structure the concepts that compose artifacts resulting from the initial stages of PSS design and how those concepts interrelate. This concept map aims to structure which classes of information should be defined in the early phases of the design process before proceeding to a detailed design. The concept map was created by extracting concepts and relationships proposed in classifications, taxonomies, ontologies, meta-models, and concept maps in the PSS and servitization fields. Those documents were identified through a comprehensive systematic literature review. The resulting concept map was verified for completeness against formal documentation of two retrospective PSS design projects. The final proposed concept map is composed of 143 concepts interconnected through 278 relationships. In its current format, the concept map may be used as a checklist to support project managers in planning and evaluating early phases of PSS design based on information completeness. Researchers may also employ it to deploy ontologies, approach further knowledge and information-related challenges in PSS design, or structure PSS-related model-based systems engineering approaches. In future research, this concept map shall be deployed in a meta-model based on artifacts commonly used in PSS design, structuring a computational tool to allow and support practical application on planning and evaluating PSS design projects.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Planning and Design phases"

1

Liu, Michael W. (Michael Wen-Tseng). "Analysis of the effect of planning/design phase factors on rework." Thesis, Massachusetts Institute of Technology, 2008. http://hdl.handle.net/1721.1/43861.

Full text
Abstract:
Thesis (S.M.)--Massachusetts Institute of Technology, Engineering Systems Division; and, (M.B.A.) -- Massachusetts Institute of Technology, Sloan School of Management; in conjunction with the Leaders for Manufacturing Program at MIT, 2008.
Includes bibliographical references (p. 59-60).
Over the past several years, Raytheon has experienced great growth in their revenue and sales. One of the contributing organizations to that growth has been the Space and Airborne Systems (SAS) business sector. To continue this growth, SAS has started initiatives to improve their Operations. One of these initiatives is to reduce the amount of rework performed within the manufacturing centers. By reducing rework, SAS will be able to reduce costs, meet aggressive schedules, and continue to satisfy customer's needs. This paper describes the development of two tools to reduce rework in an attempt to meet Raytheon's goals. One is a manufacturing/Earned-Value Measurement System monitoring tool. The second tool determines the factors during the design and planning phases of a project that affect rework. Developing these two tools will help increase transparency on the manufacturing shop floor and help reduce the amount of rework performed.
by Michael W. Liu.
M.B.A.
S.M.
APA, Harvard, Vancouver, ISO, and other styles
2

Carlsson, Linnea. "Visual Planning in construction : a study of its use in construction projects." Thesis, KTH, Fastigheter och byggande, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-96390.

Full text
Abstract:
Abstract The purpose of this master thesis is to investigate of what use the method Visual Planning can be in the construction industry in general and in the design phase of construction projects in particular.   The investigation and empirical part of the thesis has been based on semi-structured interviews with process developers, design managers and designers from Swedish companies where Visual Planning is used. The interviews have been the base for a comparative case study with the aim of providing an overview of how the method is currently used, interpreted, experienced and perceived in the Swedish construction industry and by its professionals. The master thesis has been made in collaboration with the Swedish consultancy firm Tyréns AB in Stockholm.   The results of the interviews differ on an individual level. The majority of the respondents are however positive and believe in the future of the methods. All respondents stress the lacking documentation, however, as the major difficulty. Several respondents have stressed the difficulties of working in a scattered team due to the analogue format as a shortcoming of the method as well. The biggest benefits stated are the easy accessible overview provided and the clarification of commitments, due to the active participation of the design participants, the analogue format, and the way of mapping of the information process.   It has been found that Visual Planning can be of use as a support in the process of construction project management, since it may facilitate the understanding of how to reach objectives and provide an easy accessible overview of the progress and status of a project. It should however be viewed as a complement to the process of construction project management, and not as a replacement. In conclusion it may facilitate earlier problem solving, since commitment is raised, which in the end facilitates the project to stay within budget as well as to meet the deadline.
Sammanfattning Syftet med detta examensarbete är att utreda vilken nytta metoden Visuell Planering kan vara av i byggbranschen i allmänhet och projekteringsfasen av byggprojekt i synnerhet.   Undersökningen har baserats på semi-strukturerade intervjuer med processutvecklare, projekteringsledare och projektörer från företag inom den svenska byggsektorn där Visuell Planering används. Intervjuerna har utgjort grunden för en jämförande fallstudie med avseendet att skapa en överblick och insyn i hur metoden i dagsläget används, tolkas och upplevs i den svenska byggbranschen och av yrkesverksamma i branschen. Examensarbetet har genomförts i samarbete med konsultföretaget Tyréns AB i Stockholm.   Intervjuresultaten varierar på individnivå. Majoriteten av intervjupersonerna är dock positiva och tror på metodens framtid. Alla tillfrågade beskriver den låga mängden dokumentation som det största problemet hos metoden. Flera yrkesverksamma beskriver även metodens tillkortakommanden då arbete bedrivs i spridda team. En följd av metodens analoga format.  Den genererade lättöverskådliga helhetsbilden och förtydliganden av åtagande och engagemang, som följd av projektmedlemmarnas aktiva deltagande, det analoga formatet och sättet som informationsprocessen kartläggs beskrivs som det största vinsterna.   Det har framkommit att Visuell Planering kan vara av användning och fungera som ett stöd i byggprojektledning, då metoden underlättar förståelse för hur mål ska uppnås och skapar en lättuppfattad bild av ett projekts status och framåtskridande. Metoden bör dock ses som ett komplement i processen av byggprojektledning och projekteringsledning, snarare än en ersättning. Visuell Planering kan slutligen främja problemlösningen i tidigare skeden, då känslan av förpliktelse, åtagande och engagemang höjs, vilket i sin tur skapar bättre möjligheter för projektet att hålla sig inom budget så väl som att möta deadline.
APA, Harvard, Vancouver, ISO, and other styles
3

Ziegler, Jessica. "How Can the Construction Client Improve the Work Environment in the Real Estate and Construction Process? : An Investigation of the Health and Safety Aspects in the Early Phases." Thesis, KTH, Fastigheter och byggande, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-297877.

Full text
Abstract:
During the last decade, the Swedish work environment authority (AV) observed a stagnancy of fatal accidents in Sweden. According to statistics, the building industry in Sweden is one of the third largest industries regarding occupational injuries and the industry with the most severe recorded fatal accidents. Scientific contributions have found that efforts and focus on health and safety aspects during the planning and design phases (early phases) could reduce work environment problems in the construction and maintenance phases. The purpose of this study is to explore how the construction client can improve the health and safety aspects in the early phases to enhance the work environment in the construction and maintenance phases. Further, identify the main challenges of health and safety in the early phases to improve the work environment at the construction and maintenance phases. The study has applied qualitative methods, with 13 semi-structured interviews with senior project managers at a public construction client in Sweden. After analyzing the semi-structured interviews, the findings were discussed with an expert panel for further clarifications. This study has identified that health and safety aspects during the planning and design can improve by different measures and methods to ensure a safer work environment in the construction project. It should be a priority for the construction client to be proactive with the health and safety aspects in the early phases. Furthermore, identified the study three main challenges of health and safety aspects. These challenges of health and safety aspects have been identified as crucial to address in the early phases for succeeding in preventing occupational accidents in construction projects. The first identified challenge is the lack of the construction clients' consciousness of their profound responsibilities in the work environment. The second challenge raised is the insufficient work environment competencies of the applied BAS-P and designers in the construction project. The last identified challenge is the lack of safety communication in the construction project, as the transfer meeting between the BAS-P and BAS-U and lessons learned meetings. The portrayed main challenges seem to face both countries inside and outside the EU, as reasoned from the discussion with Åsgård et al. Furthermore, the work environment is essential for commitment, re-evaluation, and improvements in routine activity. Including the construction clients and the involved actors in the construction process to achieve a construction industry with zero accidents and fatalities.
Arbetsmiljöverket (AV) har under det senaste decenniet observerat en stagnation av dödsolyckor i Sverige. Enligt statistik är byggbranschen i Sverige en av de tredje största branscherna när det gäller arbetsskador och den bransch som har flest registrerade dödsolyckor. Vetenskapliga studier har visat att prioriteringar och fokus på hälsa och säkerhet under planerings- och projekterings skeden (tidiga skeden) kan bidra till att undvika arbetsmiljöproblem på byggarbetsplatsen i produktions skede, liksom i underhållsskedet. Syftet med denna studie är att undersöka hur byggherren kan förbättra hälso- och säkerhetsaspekterna i de tidiga skedena för att förstärka arbetsmiljön i produktions- och underhållsskedena. Även att identifiera de viktigaste utmaningarna för hälso- och säkerhetsaspekter i de tidiga faserna för att förbättra arbetsmiljön i produktions- och underhållsskedena. Studien har tillämpat kvalitativa metoder, där semi-strukturerade intervjuer genomfördes med 13 projektledare hos en offentlig byggherre i Sverige. Efter att ha analyserat resultaten från de semi-strukturerade intervjuerna diskuterades analysen med en expertpanel. Resultatet i denna studie har identifierat att hälso- och säkerhetsaspekter under planering och projektering skedena kan förbättras med olika åtgärder och metoder för att säkerställa en säkrare arbetsmiljö i byggprojektet. Vad man finner är att det bör vara en prioritet för byggkunden att vara proaktiv med hälso- och säkerhetsaspekterna i de tidiga faserna. Tre huvudutmaningar för hälso- och säkerhetsaspekter har dessutom identifierats i resultatet. Dessa utmaningar för hälso- och säkerhetsaspekter ses som avgörande att hantera i de tidiga faserna för att lyckas med förebyggandet av arbetsolyckor i byggprojekt. Den första identifierade utmaningen är bristen på byggherrarnas medvetenhet om deras ansvar i arbetsmiljön. Den andra utmaningen som tas upp är den otillräckliga arbetsmiljökompetensen hos den tillämpade BAS-P och projektörerna i byggprojektet. Den sista identifierade utmaningen är bristen på säkerhetskommunikation i byggprojektet, som överföringsmöte mellan BAS-P och BAS-U och erfarenhetsåterföringsmöten. De viktigaste utmaningarna som presenteras i denna studie för förbättra hälso- och säkerhetsaspekterna i dem tidiga skedena verkar vara utmaningar som finns både i länderna inom och utanför EU, vilket togs upp i diskussionen med Åsgård et al. Dessutom dras slutsatsen att arbetsmiljön är ett viktigt ämne där engagemang, omvärdering och förbättringar bör vara en återkommande aktivitet. För både byggherren och de involverade aktörerna i hela byggprocessen för att uppnå en byggbransch med noll olyckor och dödsfall.
APA, Harvard, Vancouver, ISO, and other styles
4

Lima, Clarissa Sucupira Andrade. "The use of formal methods for decision making in the planning phase of healthcare facilities." Thesis, Available online, Georgia Institute of Technology, 2007, 2007. http://etd.gatech.edu/theses/available/etd-04042007-211547/.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Mer'eb, Muhammad Musa. "Greenometer-7 a tool to assess the sustainability of a building's life cylce at the conceptual design phase /." Cleveland, Ohio : Cleveland State University, 2008. http://rave.ohiolink.edu/etdc/view?acc_num=csu1209184917.

Full text
Abstract:
Thesis (D.Eng.)--Cleveland State University, 2008.
Abstract. Title from PDF t.p. (viewed on May 8, 2008). Includes bibliographical references (p. 321-343). Available online via the OhioLINK ETD Center. Also available in in print.
APA, Harvard, Vancouver, ISO, and other styles
6

Liu, Yang. "A flexible distributed design assistance tool in early design phases." Thesis, Stellenbosch : Stellenbosch University, 2007. http://hdl.handle.net/10019.1/21438.

Full text
Abstract:
Dissertation (PhD)--University of Stellenbosch, 2007.
ENGLISH ABSTRACT: The globalisation is increasing the complexity of product development in terms of product variants and the range of technologies implemented. It emphasises the requirement for developing various design information support systems for the world market. However, small and medium enterprises that employ a wide range of design procedures may not be able to afford customised information support systems, with the result that there is a need for flexible, i.e. easily adaptable, design support tools. Four case studies were carried out to investigate the requirements for an information support system aimed at the design process and design documents. They indicated that a design information support system aimed at supporting design teams in the pre-detail mechanical design phases should be able to adapt various design methods and handle design information in a flexible way. Flexible here means being applicable over a wide range of contexts and extendable without affecting data already captured. Ontology based approaches are widely applied where diverse information has to be handled. The development of the Internet today also makes a distributed design approach more and more popular for mechanical design. An internet-based design support system called DiDeas II (Distributed Design assistant) was developed here with an ontologybased approach implemented to provide distributed and flexible assistance during concept generation in small companies. The DiDeas II has separate server side and client side programs, which communicate through a TCP/IP connection. DiDeas II allows design teams to manage their design information according to various design methods, to decrease time-delays and to improve communication between team members. These benefits were confirmed in two case studies carried out to evaluate DiDeas II. Keywords: Distributed design; ontology; concept design, web-based system.
AFRIKAANSE OPSOMMING: Globalisering verhoog die kompleksiteit van produkontwikkeling, in terme van produk variante en die bereik van tegnologieë wat geïmplementeer word. Dit beklemtoon die behoefte om verskeie ontwerp-inligting-ondersteuningstelsels vir die wêreldmark te ontwikkel. Klein en medium ondernemings wat 'n wye spektrum ontwerpsprosedures gebruik, kan egter nie doelgemaakte inligting-ondersteuningstelsels bekostig nie, met die gevolg dat daar 'n behoefte vir maklik-aanpasbare ontwerp ondersteuningstelsels is. Vier gevallestudies is uitgevoer om die vereistes vir 'n inligting-ondersteuningstelsel gemik op die ontwerpproses en ontwerp dokumente, te ondersoek. Dit het aangetoon dat 'n ontwerp-inligting-ondersteuningstelsel, wat ontwerpspanne in die voor-detail meganiese ontwerp fases moet ondersteun, by verskeie ontwerpmetodes moet kan aanpas en ontwerpsinligting op 'n aanpasbare manier kan hanteer. Aanpasbaarheid in hierdie konteks beteken toepaslik oor 'n wye spektrum kontekste en uitbreibaar sonder om data wat alreeds ingevoer is, te beïnvloed. Ontologie-gebaseerde benaderings word wyd toegepas waar diverse inligting hanteer moet word. Die ontwikkeling van die Internet maak 'n verspreide-ontwerpbenadering meer en meer gewild vir meganiese ontwerp. 'n Internet-gebaseerde ontwerpondersteuningstelstel genaamd DiDeas II (Distributed Design assistant) is hier ontwikkel met 'n ontologie-gebaseerde benadering wat daarop gemik is om verspreide, aanpasbare hulp te verleen aan klein maatskappye gedurende konsep- ontwikkeling. Die DiDeas II stelsel het afsonderlike bediener en kliënt programme wat deur 'n TCP/IP verbinding kommunikeer. DiDeas II laat ontwerpspanne toe om hulle ontwerp inligting volgens verskeie ontwerpmetodes te bestuur, tydvertragings te verminder en om kommunikasie tussen spanlede te verbeter. Hierdie voordele is bevestig in twee gevallestudies wat uitgevoer is om DiDeas II te evalueer. Sleutelwoorde: Verspreide ontwerp; ontologie; konsepontwerp; web-gebaseerde stelsel.
APA, Harvard, Vancouver, ISO, and other styles
7

Albarello, Nicolas. "Model-based trade studies in systems architectures design phases." Thesis, Châtenay-Malabry, Ecole centrale de Paris, 2012. http://www.theses.fr/2012ECAP0052/document.

Full text
Abstract:
La conception d'architectures de systèmes est une tâche complexe qui implique des enjeux majeurs. Au cours de cette activité, les concepteurs du système doivent créer des alternatives de conception et doivent les comparer entre elles afin de sélectionner l'architecture la plus appropriée suivant un ensemble de critères. Dans le but d'étudier différentes alternatives, les concepteurs doivent généralement limiter leur étude comparative à une petite partie de l'espace de conception qui peut être composé d'un nombre immense de solutions. Traditionnellement, le processus de conception d'architecture est principalement dirigé par le jugement et l'expérience des concepteurs, et les alternatives sélectionnées sont des versions adaptées de solutions connues. Le risque est donc de sélectionner une solution pertinente mais sous-optimale. Pour gagner en confiance sur l'optimalité de la solution retenue, la couverture de l'espace de conception doit être augmentée. L'utilisation de méthodes de synthèse calculatoire d'architecture a prouvé qu'elle était un moyen efficace pour supporter les concepteurs dans la conception d'artefacts d'ingénierie (structures, circuits électriques...). Pour assister les concepteurs de systèmes durant le processus de conception d'architecture, une méthode calculatoire pour les systèmes complexes est définie. Cette méthode emploie une approche évolutionnaire (algorithmes génétiques) pour guider le processus d'exploration de l'espace de conception vers les zones optimales. La population initiale de l'algorithme génétique est créée grâce à une technique de synthèse calculatoire d'architecture qui permet de créer différentes architectures physiques et tables d'allocations pour une architecture fonctionnelle donnée. La méthode permet d'obtenir les solutions optimales du problème de conception posé. Ces solutions peuvent être ensuite utilisées par les concepteurs pour des études comparatives plus détaillées ou pour des négociations avec les fournisseurs de systèmes
The design of system architectures is a complex task which involves major stakes. During this activity, system designers must create design alternatives and compare them in order to select the most relevant system architecture given a set of criteria. In order to investigate different alternatives, designers must generally limit their trade studies to a small portion of the design-space which can be composed of a huge amount of solutions. Traditionally, the architecture design process is mainly driven by engineering judgment and designers' experiences and the selected alternatives are often adapted versions of known solutions. The risk is then to select a pertinent but yet under optimal solution. In order to increase the confidence in the optimality of the selected solution, the coverage of the design-space must be increased. The use of computational design synthesis methods proved to be an efficient way to support designers in the design of engineering artifacts (structures, electrical circuits...). In order to assist system designers during the architecture design process, a computational method for complex systems is defined. This method uses an evolutionary approach (genetic algorithms) to guide the design-space exploration process toward optimal zones. The initial population of the genetic algorithm is created thanks to a computational design synthesis technique which permits to create different physical architectures and allocation mappings for a given functional architecture. The method permits to obtain the optimal solutions of the stated design problem. These solutions can be then used by designers for more detailed trade studies or for technical negotiations with system suppliers
APA, Harvard, Vancouver, ISO, and other styles
8

Barrios, Ana Patricia, and Jonathan Vargas. "Event planning & design." Tesis, Universidad de Chile, 2017. http://repositorio.uchile.cl/handle/2250/145920.

Full text
Abstract:
TESIS PARA OPTAR AL GRADO DE MAGÍSTER EN ADMINISTRACIÓN
Ana Patricia Barrios [Parte I], Jonathan Vargas [Parte II]
La celebración de un evento implica organización y el manejo de un gran número de detalles, que debido a la falta de tiempo, no es posible organizarlo por cuenta propia. Realizarlo con la asesoría de personal capacitado produce comodidad y tranquilidad, no representando un estrés en las ajetreadas vidas de los anfitriones. En Panamá tanto por factores culturales como religiosos, se celebran acontecimientos como bautizos, primeras comuniones, matrimonios y quince años. A su vez, por la posición geográfica y presencia de multinacionales, se llevan a cabo convenciones y congresos, representando un claro atractivo para la industria de organización de eventos, la cual crece en los últimos años, realizándose a la semana en promedio hasta 15 eventos por hotel, entre sociales y corporativos. Event Planning & Design surge ante este auge y el interés de los panameños de celebrar eventos importantes y de magnitud asesorados por personal experto, debido a la satisfacción que genera a nivel familiar, social y profesional. El servicio está dirigido a la organización de eventos sociales como bodas y quince años, apuntando a un mercado compuesto por hombres y mujeres entre 35 y 65 años, de clase media-alta y alta, que residan en áreas urbanas de la Ciudad de Panamá; y en el caso de eventos corporativos, convenciones, congresos, fiestas de navidad, entre otros, a la mediana y gran empresa ubicadas en la Ciudad de Panamá, por lo que se estima un tamaño de mercado de $78,098.628.83 Se comprobó que hay un alto nivel de insatisfacción en cuanto al servicio en la actual oferta, por ende nuestra propuesta se enfocará en la calidad del servicio, a través de una atención integral, exclusividad el día del evento, valores agregados a través de alianzas, así como una variada plataforma de proveedores.
APA, Harvard, Vancouver, ISO, and other styles
9

James, Antoni Michael. "Utopian design and planning." Thesis, University of British Columbia, 1989. http://hdl.handle.net/2429/28671.

Full text
Abstract:
The purpose of this thesis is to provide a current overview of the subject of Utopian design in order to reaffirm its value as a component of planning methodology. From the relevant literature there is a wealth of comment on the need for such a paradigm expansion as well as a vast body of visions for alternate futures. Primarily a tool of physical planners, the Utopian process can be adapted to the broader context if appropriate methodology can be developed and integrated into the mainstream. The first chapter sets the context. It provides an overview of changing planning paradigms from the turn of the century and discusses areas of inadequacy in the current approach. The second chapter focuses on the subject of Utopian design, its approach, and fundamental elements as a preliminary foundation for methodological development. The third and fourth chapters examine a series of early and recent Utopian designs respectively. Early Utopian designs are described and analysed as to their impact on succeeding planning thought, thereby establishing credibility; recent Utopian designs are studied to speculate on the kinds of issues and options which planners may be involved in for the future. The fifth chapter is a speculative exercise which synthesizes ideas from the vast menu of the Utopian oeuvre into two diametrically opposed scenarios for Canada in the 21st Century. The intention is to illustrate the potential of Utopian designs in modeling alternatives for discussion and decision-making. In the final chapter, the thesis concludes by turning the discussion to other, non-physical aspects of planning where a Utopian element can be effective. It is hoped that further research into this subject can result in a broadening and balancing of the current planning paradigm and thus advance the role and responsibility of planners in better anticipating the future and in more creatively providing improved options for consideration.
Applied Science, Faculty of
Community and Regional Planning (SCARP), School of
Graduate
APA, Harvard, Vancouver, ISO, and other styles
10

Klaasen, I. T. "Knowledge-based design developing urban & regional design into a science /." Delft : Delft University Press, 2004. http://www.ebrary.com/.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Planning and Design phases"

1

Architects, Baird/Sampson Associates. City Centre Secondary Plan: City of Mississauga : phase 3, final report urban design study. Toronto: Baird/Sampson Architects, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Architects, Baird/Sampson Associates. City Centre Secondary Plan: City of Mississauga : phase 4, final report urban design study. [Toronto]: Baird/Sampson Architects, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Crawley, Drury B. Development of whole-building energy design targets for commercial buildings, phase 1 planning. Richland, WA: Pacific Northwest Laboratory, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

American Veterinary Medical Frontiers, Inc. A comprehensive national model for community civil defense: Including biological contamination, preparedness, and response : an interdisciplinary program project design : strategic master plan : preparedness and response for phase 1 of a 3 phase plan. West Boylston, MA: American Veterinary Medical Frontiers, 2007.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Indonesia. Direktorat Bina Program Penyiapan Pemukiman., ed. Phase IIIA, detailed design and planning for transmigration settlements development, Irian Jaya package I, Sakelulun WPP XXIIIe, SKP D1: Final report. [Jakarta?]: Fenco Engineers Inc. in association with P.T. Fincode International & Associates, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Grassi, Judy. Phases International Ltd. systemized hair design. Lakewood, Ohio: Phases International, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Inc, Fenco Engineers. Phase IIIA detailed design and planning for transmigration settlements development, Irian Jaya package I, Okaba WPP XXIIIf, SKP E 2: Feasibility study : final report. [Jakarta?]: Fenco Engineers Inc. in association with P.T. Fincode International & Associates, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Limited, Landscape Publications. Planning by design. Wellington, N.Z: Dept. of Conservation, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Nonomura, A. Active design for print design planning. Japan: Kyoto Shoin, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

H, Tomita, ed. Active design for print design planning. Japan: Kyoto Shoin, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Planning and Design phases"

1

Pessôa, Marcus Vinicius Pereira, and Luís Gonzaga Trabasso. "Study Phase—Planning Activities." In The Lean Product Design and Development Journey, 201–12. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-46792-4_12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Bertoni, Federica. "Advancing Joint Design and Operation of Water Resources Systems Under Uncertainty." In Special Topics in Information Technology, 119–28. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-62476-7_11.

Full text
Abstract:
AbstractGlobally, many countries are actively seeking to maximize the hydropower potential of major river basins, yielding proposals for constructing approximately 3,700 major dams in the near future. The planning of new water reservoir systems raises several major challenges that must be conjunctively accounted for within the system design phase, in order to design efficient yet sustainable infrastructures able to satisfy multiple water needs and perform well under a wide range of external future changes. This contribution aims at advancing the current planning and operation of water reservoir systems, focusing on the coupling of dam sizing and operation design in order to thoroughly capture their interdependencies also with respect to uncertainty in the main external drivers.
APA, Harvard, Vancouver, ISO, and other styles
3

Maleque, Md Abdul, and Mohd Sapuan Salit. "Design Phases." In Materials Selection and Design, 39–55. Singapore: Springer Singapore, 2013. http://dx.doi.org/10.1007/978-981-4560-38-2_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Hazarika, Manjuri, and Uday Shanker Dixit. "Different Phases of Setup Planning." In Setup Planning for Machining, 29–39. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-13320-1_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Eickhoff, Jens, Michael Lengowski, and Kai-Sören Klemich. "Satellite Mission Phases and Planning." In The FLP Microsatellite Platform, 405–20. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-23503-5_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Sciore, Edward. "Planning." In Database Design and Implementation, 267–93. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-33836-7_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Masterson, Jaimie Hicks, Walter Gillis Peacock, Shannon S. Van Zandt, Himanshu Grover, Lori Feild Schwarz, and John T. Cooper. "Organizing and Connecting through the Disaster Phases." In Planning for Community Resilience, 41–68. Washington, DC: Island Press/Center for Resource Economics, 2014. http://dx.doi.org/10.5822/978-1-61091-586-1_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Hunt, John. "The Design and Implementation Phases." In Java for Practitioners, 599–614. London: Springer London, 1988. http://dx.doi.org/10.1007/978-1-4471-0843-6_50.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

"Seven Phases for Developing Marketing Strategy and Systematic Marketing Planning (Seven-Phase Model)." In Marketing Planning by Design, 59–63. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2015. http://dx.doi.org/10.1002/9781119206217.ch4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

"Phase 1: Planning the Planning." In Marketing Planning by Design, 65–70. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2015. http://dx.doi.org/10.1002/9781119206217.ch5.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Planning and Design phases"

1

Guerrero, Hugo, and Cameron Shankland. "Integrating Airborne Datasets Into the Design and Construction Planning Phases." In 2008 7th International Pipeline Conference. ASMEDC, 2008. http://dx.doi.org/10.1115/ipc2008-64338.

Full text
Abstract:
Today, obtaining field information in traditional pipeline design workflows rely on the use of conventional aerial photography, mapping and field visits. As a Designer, Engineer or Project Manager, a field visit can answer many questions and perhaps be the key to achieving a sound, successful design and installation. While conventional aerial orthophotography and mapping is invaluable during the design, it lacks a dimension that allows you to visualize the right-of-way the way you would if you were there. The use of Airborne Video and Oblique Imagery is not intended to replace conventional aerial orthophotography or mapping, but augment its use by providing a rich visualization that, in conjunction with the planimetric data sets, can aid the project team immensely during the design and permitting phase of a project. Currently, there are Airborne Data services available serving the pipeline industry that contain custom tools that either integrate into GIS platforms or operate as stand-alone proprietary software. These tools aid designers, engineers and constructors navigate through the video without having to sit and watch the whole video. In addition, video can be geocoded to specific pipeline or right-of-way features, such as a valve sites or stream crossings. Some tools even allow you to take rough measurements from visible features like fences or roads. Having such a dataset enables project team members to revisit any location along the right-of-way as many times as required to get information to finalize a design, permit application or to estimate the cost of construction. As Project Managers, we regularly face having new team members join the project at all stages of the project. Having a video to hand to new team members reduces the time they will take to get on board and familiarize themselves with the right-of-way. It also reduces the amount of field trips required just for this purpose. Another great use of Airborne Datasets is to use it during a pre-bid conference and provide it to the contractors bidding on the job. On large pipeline projects, it is unfeasible and impractical to have the project management team tour the entire right-of-way during a job walk, and there is likely areas along the right-of-way that are not very accessible thus requiring a flyover to review it with others.
APA, Harvard, Vancouver, ISO, and other styles
2

Sormaz, Dusan N., and Behrokh Khoshnevis. "Intelligent Process Planning Implemented As an Integrated Module of CIM." In ASME 1997 Design Engineering Technical Conferences. American Society of Mechanical Engineers, 1997. http://dx.doi.org/10.1115/detc97/dfm-4326.

Full text
Abstract:
Abstract In this paper we describe an architecture of a new integrative process planning system as a part of computer integrated manufacturing research system. The process planning procedure is comprised of three phases: feature completion, process selection and process sequencing. We applied a knowledge-based approach to feature completion and process selection, and the space search algorithm for process sequencing. Description of these phases is provided and underlying knowledge representation explained. Integration between the process planning, on the one side, and CAD and scheduling, on the other, is discussed. System implementation has been described and several examples of the system execution are shown.
APA, Harvard, Vancouver, ISO, and other styles
3

Kirk, Tanner, Richard Malak, and Raymundo Arroyave. "Applying Path Planning to the Design of Additively Manufactured Functionally Graded Materials." In ASME 2018 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/detc2018-86002.

Full text
Abstract:
Additive manufacturing has enabled the creation of a near infinite set of functionally gradient materials. One limitation on the manufacturability and usefulness of these materials is the presence of undesirable phases along the gradient path. For example, such phases may increase brittleness, diminish corrosion resistance, or severely compromise the printability of the part altogether. In the current work, a design methodology is proposed to plan an FGM gradient path for any number of elements that avoids undesirable phases at a range of temperatures. Gradient paths can also be optimized for a cost function. A case study is shown to demonstrate the effectiveness of the methodology in the Fe-Ni-Cr system. Paths were successfully planned from 316L SS to pure Cr that either minimize path length or maximize separation from undesirable phases. Examinations on the stochastic variability, parameter dependency, and computational efficiency of the method are also presented. Several avenues of future research are proposed that could improve the manufacturability, utility, and performance of FGMs through gradient path design.
APA, Harvard, Vancouver, ISO, and other styles
4

Anderson, David, K. Blake Perez, Zack Xuereb, Kevin Otto, and Kris Wood. "Design Processes of Design Automation Practitioners." In ASME 2018 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/detc2018-85436.

Full text
Abstract:
The use of computers during the design process continues to grow, calling for a better understanding of how experts make use of computer tools to automate and augment their design efforts. In this study, we examine how architects and engineers consider the use of computers and computation in planning a solution to a sample design problem. We find the design automation design process can be modeled with four phases; discovery, evaluation, extrapolation and interpolation. Unlike many design methods, we find the evaluation phase generally preceded the extrapolation phase. In addition, we identify common computational strategies and challenges faced by practitioners. Understanding this information can help advise and provide directions for designers across levels of expertise, to better integrate computers and computation in existing design work, and to direct further efforts in design automation research.
APA, Harvard, Vancouver, ISO, and other styles
5

Schurmann, Altmeyer, and Zimmermann. "Three-phase chip planning-an improved top-down chip planning strategy." In IEEE/ACM International Conference on Computer-Aided Design. IEEE Comput. Soc. Press, 1992. http://dx.doi.org/10.1109/iccad.1992.279306.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Maurer, Maik, Dennis Janitza, and Alexander Ott. "Product- and CAD-Structure Planning Processes for Mass Customization Products." In ASME 7th Biennial Conference on Engineering Systems Design and Analysis. ASMEDC, 2004. http://dx.doi.org/10.1115/esda2004-58337.

Full text
Abstract:
Mass Customization (MC) is one approach to deal with the continuous increasing demand for individualized products. It’s major objective is to offer products with delivery times and prices comparable to mass produced goods. Hereby assigned possibilities are not only limited to the customization of appearance but affect a multitude of customer requirements, e.g. functions, technical attributes, or structural arrangements. Two major steps in designing customizable products are the product structure planning and the designing of CAD-models. The work presented in this paper specifies the mutual interdependencies as well as the data, which has to be exchanged in this alternating process. For an iteratively optimized planning of customizable products, knowledge will be extracted from parametric design for a further adaptation in the product spectrum structure. Using appropriate algorithms, the need for structure modifications will be derived, with the objective of eliminating critical interdependencies from the basic structure. The alternating data exchange between parametric product modeling and abstract structure planning helps to integrate bi-directional requirements (e.g. new techniques in manufacturing) or boundary conditions appearing at different design phases.
APA, Harvard, Vancouver, ISO, and other styles
7

Tolio, Tullio, Marcello Urgo, and Arianna Alfieri. "Project Scheduling With Feeding Precedence Relations: An Application to Production Planning." In ASME 2008 9th Biennial Conference on Engineering Systems Design and Analysis. ASMEDC, 2008. http://dx.doi.org/10.1115/esda2008-59425.

Full text
Abstract:
Production planning in Manufacturing-to-Order environments producing complex items must manage the execution of fabrication and/or assembling activities. In case of activities executed by workers, the committed effort can vary over time. To model this behavior, the Variable Intensity formulation has been proposed in the literature. In addition, the activities to be scheduled often represent whole production phases made of distinct production operations. Hence, the utilization of simple finish-to-start precedence relations does not correctly represent the real production process. In such cases Generalized Precedence Relations are used to allow overlapping among activities. However, since in Variable Intensity formulations the percentage execution of the activities is no more univocally related to their time execution, Generalized Precedence Relations cannot completely describe the constraints among activities. In this paper two mathematical formulations of precedence relations based on processing execution are presented to model overlapping between activities. The formulations are applied to an industrial case of production of machining centers and compared in terms of computational efficiency.
APA, Harvard, Vancouver, ISO, and other styles
8

Dong, Chunzhi, Takahiro Horinouchi, Yutaka Nomaguchi, and Kikuo Fujita. "Design Project Planning Method With Task Option Model and Two-Level Multi-Objective Optimization." In ASME 2014 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/detc2014-34827.

Full text
Abstract:
This paper proposes a new optimization-based project planning method that aims at a Pareto-optimal of the potential product performance of designed product and a project failure risk. A task option model is introduced for risk assessment of option-based project management. As its planning includes a number of various design variables and various evaluation indices, in order to solve such a complicated problem with a reasonable computation cost, this research separates the optimization problem into two phases, i.e., (i) defining of process architecture and organization structure and (ii) scheduling of resource allocation into activities. This paper demonstrates its application to a student formula design project. A proposed optimization method facilitates a project manager to explore various process plans with assessing their risks.
APA, Harvard, Vancouver, ISO, and other styles
9

Demoly, Fre´de´ric, Aristeidis Matsokis, and Dimitris Kiritsis. "A Mereotopology-Based Approach for Integrated Assembly Modeling and Planning." In ASME 2011 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2011. http://dx.doi.org/10.1115/detc2011-47439.

Full text
Abstract:
This paper describes a novel approach for integrated assembly modeling and planning. The main objective is to make assembly information accessible and exploitable by data management systems and computer-aided X tools. Product information and knowledge as well as the related assembly sequence require a logical foundation in order to be managed consistently and processed proactively. In this context, the authors consider and describe product-process relationships in the part-whole theory supported by mereology and its extension, mereotopology. Firstly, past and current research work is presented on: concurrent product design and assembly sequence planning approaches; existing assembly relational models; and spatio-temporal mereotopology. Then, a mathematical description of product relationships based on mereotopology and temporal relationships is introduced. The long term aim is the representation of the outcomes in a formal ontology, in order to allow reuse and collaborative exploitation of the assembly knowledge in the different product lifecycle phases.
APA, Harvard, Vancouver, ISO, and other styles
10

Heister, Reinhard, and Reiner Anderl. "Concept for an Integrated Workflow Planning of Dental Products Based on Federative Data Management." In ASME 2014 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/detc2014-34685.

Full text
Abstract:
Workflows to produce dental products by using CAD/CAM technology are very complex. Each patient needs an individual restoration. The challenge is to provide a patient individual production aiming at a price of mass production. But every single job has to run through an individual development as well manufacturing process. Typically, three stakeholders are involved in the workflow. The dentist performs the treatment and defines requirements for restoration. The dental laboratory plans the workflow and designs the reconstruction by using a dental CAD system. Subsequently, a milling center produces the restoration. Because of these highly heterogeneous workflows, diverse data streams and incompatibilities result. Often improper partners and resources are involved in the workflow. This fact is a significant source for errors. An additional complication is that errors are often discovered in late phases of the workflow. To avoid high costs and unacceptable delivery times, the aim is to develop a new concept for integrated workflow planning. The concept depends on three parts: Federative dental data management (FDDM) as a basic approach, including anticipated logic and structured activities. The federative data management provides a loosely coupling of heterogeneous systems crossing enterprise borders by using web technology. The FDDM service depends on APP technology. Each participant applies its specialized APP: FDDMz (dentist), FDDMd (dental laboratory) and FDDMf (milling center). FDDM services enable a continuously integrated workflow throughout the whole process of a patient individual production. Each participating enterprise is able to register its available processes and resources. Information about resources like 3D dental scanner or milling machines are able to add, according to a global data model schema. This schema depends on an integrated information model with eight partial models: Collaboration, resource, process, workflow, requirements, product, work preparation and production model. This integrated information model provides dental information including interlinked objects. Through a proper anticipation logic, conclusions about later phases can be anticipated already at early phases. The last conceptual part is workflow management on frame of structured activities. By combining the information network with the anticipation logic, filtering of appropriate partners, processes, resources and sequences is supported. Next, a prototypical implementation is demonstrated exemplarily. This concept delivers an important contribution to increase process reliability and quality as well as to reduce delivery times and costs for digital dental workflows.
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Planning and Design phases"

1

Crawley, D. B., R. S. Briggs, J. W. Jones, W. W. Seaton, J. E. Kaufman, J. J. Deringer, and E. W. Kennett. Development of whole-building energy design targets for commercial buildings: Phase 1, Planning: Volume 2, Technical report. Office of Scientific and Technical Information (OSTI), August 1987. http://dx.doi.org/10.2172/6094699.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Crawley, D. B., R. S. Briggs, J. W. Jones, W. W. Seaton, J. E. Kaufman, J. J. Deringer, and E. W. Kennett. Development of whole-building energy design targets for commercial buildings: Phase 1, Planning: Volume 1, Final report. Office of Scientific and Technical Information (OSTI), April 1987. http://dx.doi.org/10.2172/6533426.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Morrison, John E. Guidebook for Analysis and Design Phases of Course Revision. Fort Belvoir, VA: Defense Technical Information Center, May 1985. http://dx.doi.org/10.21236/ada160452.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Herrmann, Jeffrey W., and Gurdip Singh. Design Similarity Measures for Process Planning and Design Evaluation. Fort Belvoir, VA: Defense Technical Information Center, January 1997. http://dx.doi.org/10.21236/ada606418.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Drum, Christopher F. Master Planning Model for Healthcare Facility Design. Fort Belvoir, VA: Defense Technical Information Center, June 2005. http://dx.doi.org/10.21236/ada444001.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

EVOSEVICH, S. Business System Planning Project, Preliminary System Design. Office of Scientific and Technical Information (OSTI), October 2000. http://dx.doi.org/10.2172/805377.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Lisowski, Darius D., Craig D. Gerardi, Rui Hu, Dennis J. Kilsdonk, Nathan C. Bremer, Stephen W. Lomperski, Adam R. Kraus, Matthew D. Bucknor, and Mitchell T. Farmer. Water NSTF Design, Instrumentation, and Test Planning. Office of Scientific and Technical Information (OSTI), August 2017. http://dx.doi.org/10.2172/1375452.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Fisher, Andrew, John Laing, John Stoeckel, and John Townsend. Handbook for Family Planning Operations Research Design. Population Council, 1991. http://dx.doi.org/10.31899/rh10.1039.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Borden, Robert, Ki Y. Cha, Thomas Simpkin, and M. T. Lieberman. Design Tool for Planning Permanganate Injection Systems. Fort Belvoir, VA: Defense Technical Information Center, August 2010. http://dx.doi.org/10.21236/ada569542.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Hathaway, James L., Eric M. Small, and Jeffrey Hawkins. Military Construction Planning and Design Funding Requirements. Fort Belvoir, VA: Defense Technical Information Center, November 1990. http://dx.doi.org/10.21236/ada232347.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Planning and Design phases' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography