Log in

Relevant bibliographies by topics / Physical processes

Academic literature on the topic 'Physical processes'

Author: Grafiati

Published: 4 June 2021

Last updated: 25 May 2024

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Physical processes.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Physical processes"

1

Nemoshkalenko, V. V. "Physical-chemical processes under microgravity («Morphos» Project)." Kosmìčna nauka ì tehnologìâ 6, no. 4 (July 30, 2000): 133. http://dx.doi.org/10.15407/knit2000.04.149.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Brink, Kenneth H. "Coastal ocean physical processes." Reviews of Geophysics 25, no. 2 (1987): 204. http://dx.doi.org/10.1029/rg025i002p00204.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Boone, D. H. "Physical vapour deposition processes." Materials Science and Technology 2, no. 3 (March 1986): 220–24. http://dx.doi.org/10.1179/mst.1986.2.3.220.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Van de Kreeke, J. "Physical processes in estuaries." Marine Geology 110, no. 1-2 (February 1993): 189–90. http://dx.doi.org/10.1016/0025-3227(93)90124-e.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Chirkova, L. V., K. T. Yermaganbetov, E. B. Skubnevsky, K. M. Mahanov Mahanov, E. T. Arinova, and A. Omirbek. "Physical processes in Gunn diode and energy balance." Bulletin of the Karaganda University. "Physics" Series 85, no. 1 (March 30, 2017): 15–21. http://dx.doi.org/10.31489/2017ph1/15-21.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Chirkova, L. V., K. T. Yermaganbetov, E. V. Skubnevsky, K. M. Mahanov, E. T. Arinova, and A. Omirbek. "Physical processes in Gunn diode and energy balance." Bulletin of the Karaganda University. "Physics Series" 85, no. 1 (March 30, 2017): 15–21. http://dx.doi.org/10.31489/2017phys1/15-21.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Shpenkov, George P., and Leonid G. Kreidik. "Conjugate Parameters of Physical Processes and Physical Time." Physics Essays 15, no. 3 (September 2002): 339–49. http://dx.doi.org/10.4006/1.3025536.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Feoktistov, A. V., O. G. Modzelevskaya, S. A. Bedarev, and A. A. Kutsenko. "Physical modeling of cupola processes." Steel in Translation 44, no. 10 (October 2014): 707–11. http://dx.doi.org/10.3103/s0967091214100039.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Ruhnke, Lothar H. "Physical Modeling of Lightning Processes." Journal of Atmospheric Electricity 14, no. 1 (1994): 11–15. http://dx.doi.org/10.1541/jae.14.11.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Saternus, Mariola, Jacek Pieprzyca, and Tomasz Merder. "Physical Modelling of Metallurgical Processes." Materials Science Forum 879 (November 2016): 1685–90. http://dx.doi.org/10.4028/www.scientific.net/msf.879.1685.

Full text

Abstract:

Today physical modelling is a commonly used tool in modelling metallurgical processes. It can be applied both in steel metallurgy and non-ferrous metals metallurgy processes. It gives the opportunity to determine the hydrodynamic conditions of the processes. Although, the flow of mass and gas is not totally presented by such modelling, this kind of research is very often and willingly used. That is because it is really difficult to conduct experimental research in industrial conditions. Typically water is used as a modelling agent, so the physical modelling is not as expensive as the one carried out in industrial conditions. To obtain representative research from physical modelling the physical models have to be built according to the strict rules coming from the theory of similarity. The results obtained from the experimental test on the physical model, after verification, can be transferred to the real conditions. The article shows the obatined results coming from physical modelling of the steel production process. In the Institute of Metals Technologies of Silesian University of Technology the appropriate test stand was built to simulate the steel flow and mixing in the ladle. The visualization results have been presented. To simulate processing condition during aluminium refining additional test stand was also built. The exemplary results have been shown for different flow rate of gas, rotary impeller speed and different shapes of impellers. All presented results have been discussed and presented for the perspectives of further research.

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Physical processes"

1

Mitic, Slobodan. "Physical Processes In Complex Plasma." Diss., lmu, 2010. http://nbn-resolving.de/urn:nbn:de:bvb:19-118825.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Weikel, Ross R. "Physical Transformations for Greener Chemical Processes." Diss., Georgia Institute of Technology, 2005. http://hdl.handle.net/1853/11654.

Full text

Abstract:

Homogenous acid catalysts are prevalent throughout the chemical industry but all have the drawback of requiring post reaction neutralization and subsequent downstream removal of the product salt. The use of a base to neutralize the acid and the processing of the salt are ancillary to the process and the disposal of the salt is an environmental concern. The work presented here shows the use of alkylcarbonic acids, which form in situ with CO₂ pressure and neutralize on loss of CO₂ pressure rather than requiring a base. Thus CO₂ can be used to "switch" the acid on and off. The properties of alkylcarbonic acids are explored to gain understanding of the mechanisms by which they act. The acids are also used to catalyze the synthesis of α-pinene, methyl yellow, and benzyl iodide. These reactions are examples of common acid catalyzed reactions where this technology could be implemented. The second half of the work explores two other "switches". The first is using temperature to break an emulsion with a novel thermally cleavable surfactant. This technology has potential applications in a wide range of fields where surfactants are used including polymerization, oil recovery, and biosynthesis. The second is using CO₂ to liquefy a solid ionic compound to allow its use as a solvent. This would greatly increase the number of ionic species available for use in ionic liquid-CO₂ biphasic systems.

APA, Harvard, Vancouver, ISO, and other styles

3

Thompson, William Travis. "Impact of physical processes on maritime frontogenesis." Thesis, Monterey, Calif. : Springfield, Va. : Naval Postgraduate School ; Available from National Technical Information Service, 1994. http://handle.dtic.mil/100.2/ADA283105.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Crocker, Gregory Bruce. "Physical processes in Antarctic landfast sea ice." Thesis, University of Cambridge, 1988. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.278282.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Han, Hwang-Jin. "Physical processes in hollow cathode discharge sources." Thesis, Monterey, California. Naval Postgraduate School, 1989. http://hdl.handle.net/10945/27208.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Jones, Bethan. "Effects of physical processes in baroclinic waves." Thesis, University of Reading, 1992. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.306365.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Coutinho, Mariane M. "Optimal midlatitude growth : impact of physical processes." Thesis, University of Reading, 2003. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.414569.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Harris, Daniel. "Physical processes and morphodynamics of coral reefs." Thesis, The University of Sydney, 2013. http://hdl.handle.net/2123/10435.

Full text

Abstract:

Coral reefs are valuable ecosystems due to their ability to support many diverse biological and geological assemblages. They are also of social and economic significance with the Great Barrier Reef (GBR) an important national symbol for Australia and a UNESCO world heritage site. Ecological studies have observed a decline in coral reef health in many parts of the world over the last few decades, due to human pressures (both local and global) in addition to natural variations of the environmental setting. However, the spatial and temporal resolution of most ecological assessments is inevitably limited, particularly on the scales of decadal to millennial coral reef change. Geological studies on the other hand accurately assess coral reef evolution over thousands of years but struggle with small scale changes in geomorphology and biological assemblages. Studies with a geomorphic and morphodynamic focus are required in order to bridge the gap between the ecological and geological understanding of coral reef evolution and provide information regarding the decadal to millennial change in reef geomorphology and carbonate production. In spite of this, physical process studies on coral reefs are few, particularly when compared to siliciclastic settings (such as estuaries and beaches) with a limited understanding of the mechanisms initiating geomorphic change in coral reef systems. The physical processes (waves and currents) acting on a coral reef windward platform and back-reef sand apron were assessed, along with morphological surveys and sedimentologic and chronostratigaphic reconstruction of sand apron evolution. Dating of dead patch-reefs buried by sand apron accretion was conducted in order to examine long-term sand apron evolution. Sampling and dating of fossil micro-atolls was also conducted in order to establish potential sea level history for the southern GBR. The sand apron geomorphology was shown to have channel formations as well as shallower areas which were associated with buried patch reefs. These features affected current flow on the sand apron with channels directing current off the sand apron, mainly during ebb tides (ebb dominated), into the lagoon or towards the reef crest and the shallow areas which were dominated by lagoonward directed flow across the sand apron (flood dominated). This is similar to the processes in siliciclastic environments, such as estuaries, and indicates that morphodynamic relationships between current flow and geomorphology occur in coral reef environments. In spite of this, average current flow did not exceed the required velocity to entrain sediment; sediment entrainment was only caused by short term peaks in current due to waves. These results showed that sediment entrainment under modal low-energy conditions does occur in back-reef environments; albeit on a small scale (only 3.5% of all recorded waves could entrain sediment). Most entrainment occurred at higher tidal stages (when depth over the reef platform (hd > 1 m) when potential mobility PM of sediment could be up to 40%. Spatial variation in PM and significant wave height (Hs) were found to extend beyond cross-reef attenuation of wave height and energy. The attenuation of Hs across the sand apron could be reasonably described based on the changes in offshore wave height, depth over the reef platform, and cross-reef distance from the reef rim (Xd). However, these variables could not explain along-reef trends within the data. To assess the along-reef variation in wave characteristics an additional distance value was introduced (Xpd) which combined the cross-reef distance to the reef rim (Xd) and the along-reef distance from the initial point of wave refraction on the reef rim (Xp). Spatial changes in wave height, PM wave velocity and grain size correlated with changes in Xpd. An empirical model was developed which could calculate wave height based on a few basic inputs of offshore wave weight, offshore wave direction, Xd and Xp. This model can be used in windward reef environments to not only assess the spatial variation in wave characteristics but also potential areas of sediment mobility and trends in sediment grain size. Radiocarbon ages and elevations of the fossil micro-atolls show that relative sea level was between 1-1.3 m higher than present between 3800-2200 cal. yr. BP. This data set is the first direct constraint through fixed biological indicators on sea level during the Holocene highstand in the southern GBR. These dates suggest that the Holocene sea level for the southern GBR follows a similar trend to current sea level curves for the east Australian coastline where the Holocene highstand was between 7000-2000 cal. yr. BP before falling to its present level. Rapid sand apron development occurred between 6000-2000 cal. yr. BP with most of the sand apron established during this period. Little or no sand apron development has occurred in the last 2000 years. This correlates with the micro-atoll data in this thesis and the sea level fall observed in previous studies at approximately 2000 cal. yr. BP. The fall in sea level caused an ecological shift on the reef platforms from live coral to algal dominated turning off the majority of carbonate production. It is likely that this led to a hiatus in sand apron development that has persisted for 2000 years. A conceptual model was developed that describes the non-linear lagoonal infill and sand apron development during the Holocene due to variations in sea level. In this model, rapid development of both reef platforms and back-reef sedimentary formations initially occurred during catch-up reef growth phase or when the windward margins reached sea level. This highly productive state may persist if sea level remains consistent and allows for productive live coral growth on reef platforms. A fall in sea level strands live coral on the reef platforms, leading to a turn-off of carbonate production and sediment input resulting in a reduction in the rate of lagoon infill. This conceptual framework has significant consequences for traditional reef growth models which generally show linear trajectories of reef evolution and also for assessments of coral reef response under future climate change predicted variations in sea level.

APA, Harvard, Vancouver, ISO, and other styles

9

Peters, Kyle C. "Sustainable Materials and Processes for Optoelectronic Applications." Case Western Reserve University School of Graduate Studies / OhioLINK, 2019. http://rave.ohiolink.edu/etdc/view?acc_num=case1554397264722736.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Salter, Victoria Clare. "Anodic processes on aluminium." Thesis, University of Cambridge, 1995. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.387987.

Full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "Physical processes"

1

Research, Hydraulics, ed. Alluvial processes: Physical processes. Wallingford: Hydraulics Research Ltd, 1987.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

Physical processes. Leamington Spa: Scholastic, 1996.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

Phil, Gauron, ed. Physical processes 1. Warwick: Channel 4 Schools, 1996.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

1943-, Freeman Harry, ed. Physical/chemical processes. Lancaster: Technomic Pub. Co., 1990.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

Exoplanet atmospheres: Physical processes. Princeton, N.J: Princeton University Press, 2010.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

6

Dronkers, Job, and Wim van Leussen, eds. Physical Processes in Estuaries. Berlin, Heidelberg: Springer Berlin Heidelberg, 1988. http://dx.doi.org/10.1007/978-3-642-73691-9.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Roxburgh, Ian W., and Jean-Louis Masnou, eds. Physical processes in astrophysics. Berlin, Heidelberg: Springer Berlin Heidelberg, 1995. http://dx.doi.org/10.1007/bfb0118702.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

D, Thompson Russell, ed. Processes in physical geography. London: Longman, 1986.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

9

J, Dronkers J., Leussen Wim van 1946-, and Netherlands. Ministerie van Verkeer en Waterstaat., eds. Physical processes in estuaries. Berlin: Springer-Verlag, 1988.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

10

Delone, Nikolai B. Multiphoton Processes in Atoms. Berlin, Heidelberg: Springer Berlin Heidelberg, 1994.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Book chapters on the topic "Physical processes"

1

Vyazovkin, Sergey. "Physical Processes." In Isoconversional Kinetics of Thermally Stimulated Processes, 63–161. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-14175-6_3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Chubarenko, Boris V. "MONITORING PHYSICAL PROCESSES." In Assessment of the Fate and Effects of Toxic Agents on Water Resources, 109–25. Dordrecht: Springer Netherlands, 2007. http://dx.doi.org/10.1007/978-1-4020-5528-7_5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Toledo, Romeo T., Rakesh K. Singh, and Fanbin Kong. "Physical Separation Processes." In Food Science Text Series, 355–83. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-90098-8_13.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Toledo, Romeo T. "Physical Separation Processes." In Fundamentals of Food Process Engineering, 507–47. Boston, MA: Springer US, 1993. http://dx.doi.org/10.1007/978-1-4615-7052-3_13.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Toledo, Romeo T. "Physical Separation Processes." In Fundamentals of Food Process Engineering, 507–47. Boston, MA: Springer US, 1999. http://dx.doi.org/10.1007/978-1-4615-7055-4_13.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Ichinose, Noboru, Yoshiharu Ozaki, and Seiichirō Kashū. "Physical Manufacturing Processes." In Superfine Particle Technology, 79–122. London: Springer London, 1992. http://dx.doi.org/10.1007/978-1-4471-1808-4_4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Kubo, Ryogo, Morikazu Toda, and Natsuki Hashitsume. "Physical Processes as Stochastic Processes." In Statistical Physics II, 40–108. Berlin, Heidelberg: Springer Berlin Heidelberg, 1985. http://dx.doi.org/10.1007/978-3-642-96701-6_2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Kubo, Ryogo, Morikazu Toda, and Natsuki Hashitsume. "Physical Processes as Stochastic Processes." In Statistical Physics II, 40–108. Berlin, Heidelberg: Springer Berlin Heidelberg, 1991. http://dx.doi.org/10.1007/978-3-642-58244-8_2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Wolpert, David H. "Inference Concerning Physical Systems." In Programs, Proofs, Processes, 438–47. Berlin, Heidelberg: Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-642-13962-8_48.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Westwood, W. D. "Physical Vapor Deposition." In Microelectronic Materials and Processes, 133–201. Dordrecht: Springer Netherlands, 1989. http://dx.doi.org/10.1007/978-94-009-0917-5_4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Physical processes"

1

Brickhouse, Nancy S. "The Role of Atomic Physics in Understanding Physical Processes in High Energy Astrophysics." In ATOMIC PROCESSES IN PLASMAS: 15th International Conference on Atomic Processes in Plasmas. AIP, 2007. http://dx.doi.org/10.1063/1.2768840.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Hammond, P. "Physical processes in electromagnetism." In IEE Colloquium on EMC-Fundamentals. IEE, 1996. http://dx.doi.org/10.1049/ic:19960307.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Samoilov, V., S. Akachev, V. Kapustin, and V. Mestcheryakov. "Physical processes at opening contacts." In Electrical Contacts - 1999. IEEE, 1999. http://dx.doi.org/10.1109/holm.1999.795935.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Mendeleev, Evgeny, Darya Burtseva, Yuri Kiliba, Roman Petrov, Slavcho Bozhkov, Ivan Milenov, and Penko Bozhkov. "Virtual Design of Physical Processes." In 2022 22nd International Symposium on Electrical Apparatus and Technologies (SIELA). IEEE, 2022. http://dx.doi.org/10.1109/siela54794.2022.9845749.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Zakharov, V. N., V. A. Orlov, S. V. Panov, N. Fominy, A. S. Ratushnyak, T. A. Zapara, N. B. Rubtsov, and S. I. Baiborodin. "Physical processes accompanied transcapillary exchange." In 2012 IEEE 11th International Conference on Actual Problems of Electronics Instrument Engineering (APEIE). IEEE, 2012. http://dx.doi.org/10.1109/apeie.2012.6629043.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Bordel, Borja, Ramon Alcarria, and Antonio Jara. "Process execution in humanized Cyber-physical systems: Soft processes." In 2017 12th Iberian Conference on Information Systems and Technologies (CISTI). IEEE, 2017. http://dx.doi.org/10.23919/cisti.2017.7975901.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Maitre, Daniel, Zvi Bern, Carola Berger, Lance Dixon, Darren Forde, Fernando Febres Cordero, Tanju Gleisberg, Harald Ita, and David A. Kosower. "Multi-jet processes at NLO." In European Physical Society Europhysics Conference on High Energy Physics. Trieste, Italy: Sissa Medialab, 2010. http://dx.doi.org/10.22323/1.084.0367.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Taddei, Márcio M., Bruno M. Escher, Luiz Davidovich, and Ruynet L. de Matos Filho. "Quantum Speed Limit for Physical Processes." In Quantum Information and Measurement. Washington, D.C.: OSA, 2013. http://dx.doi.org/10.1364/qim.2013.w6.32.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Furzikov, Nickolay P. "Physical processes of laser tissue ablation." In Moscow - DL tentative, edited by Sergei A. Akhmanov and Marina Y. Poroshina. SPIE, 1991. http://dx.doi.org/10.1117/12.57295.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Radchenko, I. N. "Methodological aspects of physical processes modeling." In SECOND INTERNATIONAL CONFERENCE ON MATERIAL SCIENCE, SMART STRUCTURES AND APPLICATIONS: ICMSS-2019. AIP Publishing, 2019. http://dx.doi.org/10.1063/1.5140179.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Physical processes"

1

Buckmaster, John. Modeling of Physical Processes. Fort Belvoir, VA: Defense Technical Information Center, April 2002. http://dx.doi.org/10.21236/ada408985.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Buchmaster. Modeling of Physical Processes. Fort Belvoir, VA: Defense Technical Information Center, May 1999. http://dx.doi.org/10.21236/ada384825.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Bach, Eric, Susan Coppersmith, Mark Friesen, and Robert Joynt. Quantum Algorithms Based on Physical Processes. Fort Belvoir, VA: Defense Technical Information Center, December 2013. http://dx.doi.org/10.21236/ada606492.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Bach, Eric, Susan Coppersmith, Mark Friesen, and Robert Joynt. Quantum Algorithms Based on Physical Processes. Fort Belvoir, VA: Defense Technical Information Center, December 2013. http://dx.doi.org/10.21236/ada608050.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Mayle, R. W. Physical processes in collapse driven supernova. Office of Scientific and Technical Information (OSTI), November 1985. http://dx.doi.org/10.2172/5894155.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Anderson, Donald M. Phytoplankton Blooms and Coastal Physical Processes. Fort Belvoir, VA: Defense Technical Information Center, January 1993. http://dx.doi.org/10.21236/ada280646.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Law, Chung K. Physical and Chemical Processes in Flames. Fort Belvoir, VA: Defense Technical Information Center, February 2004. http://dx.doi.org/10.21236/ada422029.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Roberts, William L. Chemical and Physical Processes of Combustion. Fort Belvoir, VA: Defense Technical Information Center, October 2000. http://dx.doi.org/10.21236/ada384120.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Cheung, Kevin K. Tropical Cyclone Formation: Physical Processes and Predictions. Fort Belvoir, VA: Defense Technical Information Center, September 2002. http://dx.doi.org/10.21236/ada627718.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Gnedin, Nickolay Y. Modeling Physical Processes at Galactic Scales and Above. Office of Scientific and Technical Information (OSTI), December 2014. http://dx.doi.org/10.2172/1327021.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!