Relevant bibliographies by topics / Phase flow

Academic literature on the topic 'Phase flow'

Author: Grafiati
Published: 10 December 2022
Last updated: 29 January 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Contents

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Phase flow.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Phase flow"

1

Aghaee, Mohammad, Rouhollah Ganjiazad, Ramin Roshandel, and Mohammad Ali Ashjari. "Two-phase flow separation in axial free vortex flow." Journal of Computational Multiphase Flows 9, no. 3 (July 24, 2017): 105–13. http://dx.doi.org/10.1177/1757482x17699411.

Full text
Abstract:
Multi-phase flows, particularly two-phase flows, are widely used in the industries, hence in order to predict flow regime, pressure drop, heat transfer, and phase change, two-phase flows should be studied more precisely. In the petroleum industry, separation of phases such as water from petroleum is done using rotational flow and vortices; thus, the evolution of the vortex in two-phase flow should be considered. One method of separation requires the flow to enter a long tube in a free vortex. Investigating this requires sufficient knowledge of free vortex flow in a tube. The present study examined the evolution of tube-constrained two-phase free vortex using computational fluid dynamics. The discretized equations were solved using the SIMPLE method. It was determined that as the liquid flows down the length of the pipe, the free vortex evolves into combined forced and free vortices. The tangential velocity of the free and forced vortices also decreases in response to viscosity. It is shown that the concentration of the second discrete phase (oil) is greatest at the center of the pipe in the core of the vortex. This concentration is at a maximum at the outlet of the pipe.
APA, Harvard, Vancouver, ISO, and other styles
2

Ode, Kosuke, Toshihiro Ohmae, Kenji Yoshida, and Isao Kataoka. "STUDY OF FLOW STRUCTURE IN THE AERATION TANK INDUCED BY TWO PHASE JET FLOW(Multiphase Flow)." Proceedings of the International Conference on Jets, Wakes and Separated Flows (ICJWSF) 2005 (2005): 229–34. http://dx.doi.org/10.1299/jsmeicjwsf.2005.229.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

HARAGUCHI, Naoki, and Hiroyasu OHTAKE. "ICONE19-43620 Study on Pressure Loss of Liquid Single-Phase Flow and Two Phase Flow in Micro- and Mini-Channels." Proceedings of the International Conference on Nuclear Engineering (ICONE) 2011.19 (2011): _ICONE1943. http://dx.doi.org/10.1299/jsmeicone.2011.19._icone1943_250.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Voutsinas, Alexandros, Toshihiko Shakouchi, Junichi Takamura, Koichi Tsujimoto, and Toshitake Ando. "FLOW AND CONTROL OF VERTICAL UPWARD GAS-LIQUID TWO-PHASE FLOW THROUGH SUDDEN CONTRACTION PIPE(Multiphase Flow 2)." Proceedings of the International Conference on Jets, Wakes and Separated Flows (ICJWSF) 2005 (2005): 307–12. http://dx.doi.org/10.1299/jsmeicjwsf.2005.307.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Turza, J., Z. Tkáč, and M. Gullerová. "Geometric displacement volume and flow in the phase of a two-phase hydraulic converter." Research in Agricultural Engineering 53, No. 2 (January 7, 2008): 54–66. http://dx.doi.org/10.17221/2122-rae.

Full text
Abstract:
The paper researches the possibilities to replace the parallel flow hydraulic mechanisms in agricultural machinery with hydraulic units with fluid alternating flow as they provide more efficient operation due to their output alternating motion. The method being presented analyses how the geometric displacement volume in the fluid alternating piston converter is created. This is basically achieved by adding or omitting elements in the phase which consequently reduces the quantity of converter types being manufactured.
APA, Harvard, Vancouver, ISO, and other styles
6

Naung, Khine Tun, Hayato TAJIMA, and Hideaki MONJI. "315 Analytical Study on Supersonic Two-Phase Flow Nozzle." Proceedings of Ibaraki District Conference 2012.20 (2012): 85–86. http://dx.doi.org/10.1299/jsmeibaraki.2012.20.85.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

UEMATSU, Junichi, Kazuya ABE, Tatsuya HAZUKU, Tomoji TAKAMASA, and Takashi HIBIKI. "ICONE15-10315 EFFECT OF WALL WETTABILITY ON FLOW CHARACTERISTICS OF GAS-LIQUID TWO-PHASE FLOW." Proceedings of the International Conference on Nuclear Engineering (ICONE) 2007.15 (2007): _ICONE1510. http://dx.doi.org/10.1299/jsmeicone.2007.15._icone1510_159.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Sassi, Paolo, Youssef Stiriba, Julia Lobera, Virginia Palero, and Jordi Pallarès. "Experimental Analysis of Gas–Liquid–Solid Three-Phase Flows in Horizontal Pipelines." Flow, Turbulence and Combustion 105, no. 4 (May 9, 2020): 1035–54. http://dx.doi.org/10.1007/s10494-020-00141-1.

Full text
Abstract:
AbstractThe dynamics of three-phase flows involves phenomena of high complexity whose characterization is of great interest for different sectors of the worldwide industry. In order to move forward in the fundamental knowledge of the behavior of three-phase flows, new experimental data has been obtained in a facility specially designed for flow visualization and for measuring key parameters. These are (1) the flow regime, (2) the superficial velocities or rates of the individual phases; and (3) the frictional pressure loss. Flow visualization and pressure measurements are performed for two and three-phase flows in horizontal 30 mm inner diameter and 4.5 m long transparent acrylic pipes. A total of 134 flow conditions are analyzed and presented, including plug and slug flows in air–water two-phase flows and air–water-polypropylene (pellets) three-phase flows. For two-phase flows the transition from plug to slug flow agrees with the flow regime maps available in the literature. However, for three phase flows, a progressive displacement towards higher gas superficial velocities is found as the solid concentration is increased. The performance of a modified Lockhart–Martinelli correlation is tested for predicting frictional pressure gradient of three-phase flows with solid particles less dense than the liquid.
APA, Harvard, Vancouver, ISO, and other styles
9

Meziou, Amine, Zurwa Khan, Taoufik Wassar, Matthew A. Franchek, Reza Tafreshi, and Karolos Grigoriadis. "Dynamic Modeling of Two-Phase Gas/Liquid Flow in Pipelines." SPE Journal 24, no. 05 (April 22, 2019): 2239–63. http://dx.doi.org/10.2118/194213-pa.

Full text
Abstract:
Summary Presented is a reduced–order thermal fluid dynamic model for gas/liquid two–phase flow in pipelines. Specifically, a two–phase–flow thermal model is coupled with a two–phase–flow hydraulics model to estimate the gas and liquid properties at each pressure and temperature condition. The proposed thermal model estimates the heat–transfer coefficient for different flow patterns observed in two–phase flow. For distributed flows, where the two phases are well–mixed, a weight–based averaging is used to estimate the equivalent fluid thermal properties and the overall heat–transfer coefficient. Conversely, for segregated flows, where the two phases are separated by a distinct interface, the overall heat–transfer coefficient is dependent on the liquid holdup and pressure drop estimated by the fluid model. Intermittent flows are considered as a combination of distributed and segregated flow. The integrated model is developed by dividing the pipeline into segments. Equivalent fluid properties are identified for each segment to schedule the coefficients of a modal approximation of the transient single–phase–flow pipeline–distributed–parameter model to obtain dynamic pressure and flow rate, which are used to estimate the transient temperature response. The resulting model enables a computationally efficient estimation of the pipeline–mixture pressure, temperature, two–phase–flow pattern, and liquid holdup. Such a model has utility for flow–assurance studies and real–time flow–condition monitoring. A sensitivity analysis is presented to estimate the effect of model parameters on the pipeline–mixture dynamic response. The model predictions of mixture pressure and temperature are compared with an experimental data set and OLGA (2014) simulations to assess model accuracy.
APA, Harvard, Vancouver, ISO, and other styles
10

Rao, Bharath, Friederich Kupzog, and Martin Kozek. "Three-Phase Unbalanced Optimal Power Flow Using Holomorphic Embedding Load Flow Method." Sustainability 11, no. 6 (March 24, 2019): 1774. http://dx.doi.org/10.3390/su11061774.

Full text
Abstract:
Distribution networks are typically unbalanced due to loads being unevenly distributed over the three phases and untransposed lines. Additionally, unbalance is further increased with high penetration of single-phased distributed generators. Load and optimal power flows, when applied to distribution networks, use models developed for transmission grids with limited modification. The performance of optimal power flow depends on external factors such as ambient temperature and irradiation, since they have strong influence on loads and distributed energy resources such as photo voltaic systems. To help mitigate the issues mentioned above, the authors present a novel class of optimal power flow algorithm which is applied to low-voltage distribution networks. It involves the use of a novel three-phase unbalanced holomorphic embedding load flow method in conjunction with a non-convex optimization method to obtain the optimal set-points based on a suitable objective function. This novel three-phase load flow method is benchmarked against the well-known power factory Newton-Raphson algorithm for various test networks. Mann-Whitney U test is performed for the voltage magnitude data generated by both methods and null hypothesis is accepted. A use case involving a real network in Austria and a method to generate optimal schedules for various controllable buses is provided.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Phase flow"

1

Al-Yarubi, Qahtan. "Phase flow rate measurements of annular flows." Thesis, University of Huddersfield, 2010. http://eprints.hud.ac.uk/id/eprint/9104/.

Full text
Abstract:
In the international oil and gas industry multiphase annular flow in pipelines and wells is extremely important, but not well understood. This thesis reports the development of an efficient and cheap method for measuring the phase flow rates in two phase annular and annular mist flow, in which the liquid phase is electrically conducting, using ultrasonic and conductance techniques. The method measures changes in the conductance of the liquid film formed during annular flow and uses these to calculate the volumetric and mass flow rates of the liquid film. The gas velocity in the core of the annular flow is measured using an ultrasonic technique. Combined with an entrainment model and the liquid film measurements described above, the ultrasonic technique enables the volumetric flow rate of the gas in the core and the volumetric and mass flow rates of entrained liquid droplets to be measured. This study was based on experimental work and the use of modelling techniques. The practical investigation comprised a series of experiments conducted on a purpose built flow loop in which the test section was a Perspex pipe of 50mm ID. The experimental work was limited to two-phase air-water flow. The flow loop was specifically designed to accommodate the different instruments and subsystems designed in this investigation including bespoke flow meters and a film extraction system. Most flow loop controls were automated using a MATLAB program. Reference measurement of the total water flow rate was made using a calibrated turbine flow meter and of the air flow rate using a calibrated rotameter. For the combined ultrasonic/conductance method investigated in this thesis, the velocity of the gas in the core was found using a novel Ultrasonic Flow Meter (USFM). The positioning and arrangement of the transducers have never been used previously. The flow velocity of the liquid film and the thickness of the film were measured using a novel Conductance Flow Meter (CFM). The CFM measured the liquid film thickness using novel wall conductance probes. By cross correlating the signals from a pair of such probes the film velocity was obtained. Good agreement of the experimental results obtained from the CFM and USFM with results published in the literature was found. Although not investigated experimentally in the work described in this thesis, annular flows encountered in the oil industry may contain a liquid phase comprising a mixture of oil and water. For such flows, the volume fractions of the oil and water can be measured using an automated bypass system developed during this project. The bypass system periodically extracts part of the liquid film, measures its density and then releases the sample back into the pipeline. The liquid phase volume fractions are determined from this density measurement which can be performed more than once per minute. An entrainment model was developed, which is required by the ultrasonic/conductance flow metering technique described in this thesis, in which the mass fraction of the liquid flowing as entrained droplets in the core can be determined from the liquid film thickness and velocity measurements. A mathematical model was also developed to describe the properties of the liquid film, such as liquid velocity profile within the film, and the model’s results were found to agree with the experimental results obtained during the project and also with previous work cited in the literature. The complexity of this latter model was reduced by making a number of simplifying assumptions, which are presented and discussed in the thesis, including the assumption that in annular flow there is a dynamic balance liquid entrainment and droplets being deposited back onto the film. The combination of the designed CFM and USFM with the bypass tube and the entrainment model offer the opportunity for a ‘wet gas’ flow meter to be developed to measure two and three phase annular flows at relatively low cost and with enhanced accuracy. Such a device would have the advantage that it would by substantially smaller than systems using separators and it could even be retrofitted onto off-shore platforms. The integration of the subsystems developed in this project into a single system capable of giving on-line measurements of annular flow would be a major benefit to the author’s sponsor, Petroleum Development of Oman.
APA, Harvard, Vancouver, ISO, and other styles
2

Kunda, Wilkinson. "Two phase problems and two phase flow." Thesis, University of Hull, 1986. http://hydra.hull.ac.uk/resources/hull:5902.

Full text
Abstract:
In section 1 of this thesis a two-dimensional mathematical model is used to investigate the circulation in a gas-bubble agitation system of a cylindrical vessel for the case of an orifice located at the centre of the base. The two-phase (liquid/gas) region is assumed to be confined to a cone-shaped region and is investigated using Wallis' Drift Flux Model. In the single-phase (liquid) region the turbulent Navier-Stokes equations, written in terms of the stream function, are used for the mathematical model. The analysis in the two-phase region yields the boundary conditions on the two-phase/single-phase boundary. The velocity field in the two-phase region is solved analytically giving results in closed form. A numerical algorithm is developed for calculating liquid flow in the single phase region, and numerical results are presented graphically in terms of the stream function. In section 2 two moving interface problems are investigated. Small time analytic solutions are found for three-dimensional inward solidification of a half space initially at fusion temperature in the first problem. In the second problem, perturbation solutions for melting of a cylindrical annulus with constant heat flux on inner surface are given. In both problems the interface immobilization technique is used. Interface locations at various times are calculated for the inward solidification problem and the results shown in three-dimensional graphs. First and second perturbation terms for the interface location are given for the second problem and graphs of each are presented for a particular case.
APA, Harvard, Vancouver, ISO, and other styles
3

Ariyoshi, Gen. "Flow Characteristics of Lead-Bismuth Two-phase Flow." Kyoto University, 2019. http://hdl.handle.net/2433/242325.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Whitaker, T. S. "Measurement of two-phase flows by phase separation." Thesis, University of Liverpool, 1992. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.240831.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Kazeem, Akintunde. "Flow induced phase inversion emulsification." Thesis, University of Nottingham, 1999. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.267627.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Wong, Wai-Lid. "Flow development and mixing in three phase slug flow." Thesis, Imperial College London, 2003. http://hdl.handle.net/10044/1/7780.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Neuweiler, Insa. "Macroscopic parameters for two-phase flow." [S.l.] : [s.n.], 1999. http://e-collection.ethbib.ethz.ch/show?type=diss&nr=13490.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Dillon, Chad Michael. "Two-Phase Flow Within Narrow Annuli." Thesis, Georgia Institute of Technology, 2004. http://hdl.handle.net/1853/5097.

Full text
Abstract:
A study of two-phase flow in annular channels with annular gaps of less than 1 mm is useful for the design and safety analysis of high power density systems such as accelerator targets and nuclear reactor cores. Though much work has been done on pressure drop in two-phase flow, designers rely mostly on empirical models and correlations; hence, it is valuable to study their applicability for different channel sizes, geometries, and gas qualities. The pressure drop along a concentric annular test section was measured for cases of either constant quality or variable quality along its length (such as in sub-cooled and flow boiling). A porous tube was used to inject gas along the inner surface of the annular channel, thereby simulating the case of flow boiling along the inner surface. The data were compared to predictions of various models and correlations. Additionally, the effect of wall vibrations on the pressure drop was examined. Experiments were conducted by imposing vibrations of known amplitudes and frequencies on the outer tube of the annulus. Wall vibrations were thought to be important for flow in microchannels where the vibration amplitudes may be significant compared to the channel hydraulic diameter. The results obtained in this investigation indicate that the pressure drop correlation given by Beattie and Whalley provides the best agreement with the data for both porous tube gas injection (i.e. variable quality) and constant quality two-phase flow within the narrow annulus. Furthermore, the results show that there is a minimal effect of vibrations on two-phase pressure drop over the range of frequencies and amplitudes studied.
APA, Harvard, Vancouver, ISO, and other styles
9

Srichai, Somprasong. "High pressure separated two-phase flow." Thesis, Imperial College London, 1994. http://hdl.handle.net/10044/1/8656.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Shaha, Jonathan. "Phase interactions in transient stratified flow." Thesis, Imperial College London, 2000. http://hdl.handle.net/10044/1/8653.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Phase flow"

1

Peker, Suemer M. Solid-liquid two phase flow. Netherlands: Elsevier Science Pub, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Peker, Sümer M. Solid-liquid two phase flow. Amsterdam: Elsevier, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kakaç, Sadik, Arthur E. Bergles, and E. Oliveira Fernandes, eds. Two-Phase Flow Heat Exchangers. Dordrecht: Springer Netherlands, 1988. http://dx.doi.org/10.1007/978-94-009-2790-2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Critical regimes of two-phase flows with a polydisperse solid phase. Dordrecht: Springer, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Teixeira, Jose Carlos Fernandes. Turbulence in annular two phase flow. Birmingham: University of Birmingham, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Whalley, P. B. Two-phase flow and heat transfer. Oxford: Oxford University Press, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Wang, Yu-Jiun. Parameters of two-phase bubbly flow. Birmingham: University of Birmingham, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Gu, Junjie, Shujun Wang, and Zhongxue Gan. Two-Phase Flow in Refrigeration Systems. New York, NY: Springer New York, 2014. http://dx.doi.org/10.1007/978-1-4614-8323-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Two-phase flow in complex systems. New York: John Wiley, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Coward, Adrian V. Stability of oscillatory two phase Couette flow. Hampton, Va: Institute for Computer Applications in Science and Engineering, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Phase flow"

1

Bourgeat, Alain. "Two-Phase Flow." In Interdisciplinary Applied Mathematics, 95–127. New York, NY: Springer New York, 1997. http://dx.doi.org/10.1007/978-1-4612-1920-0_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Akimoto, Hajime, Yoshinari Anoda, Kazuyuki Takase, Hiroyuki Yoshida, and Hidesada Tamai. "Two-Phase Flow." In An Advanced Course in Nuclear Engineering, 173–91. Tokyo: Springer Japan, 2016. http://dx.doi.org/10.1007/978-4-431-55603-9_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Gray, William G., and Cass T. Miller. "Two-Phase Flow." In Advances in Geophysical and Environmental Mechanics and Mathematics, 421–63. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-04010-3_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Jakobsen, Hugo A. "Single Phase Flow." In Chemical Reactor Modeling, 3–181. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-05092-8_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Runge, Val M., and Johannes T. Heverhagen. "Phase Imaging: Flow." In The Physics of Clinical MR Taught Through Images, 166–67. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-85413-3_75.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Bruining, Hans. "Two-Phase Flow." In Upscaling of Single- and Two-Phase Flow in Reservoir Engineering, 103–71. London: CRC Press, 2021. http://dx.doi.org/10.1201/9781003168386-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Bruining, Hans. "One-Phase Flow." In Upscaling of Single- and Two-Phase Flow in Reservoir Engineering, 15–69. London: CRC Press, 2021. http://dx.doi.org/10.1201/9781003168386-2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Taylor, A. M. K. P. "Two Phase Flow Measurements." In Optical Diagnostics for Flow Processes, 205–28. Boston, MA: Springer US, 1994. http://dx.doi.org/10.1007/978-1-4899-1271-8_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

van Wijngaarden, L. "Turbulent Two-Phase Flow." In Advances in Turbulence VI, 535–41. Dordrecht: Springer Netherlands, 1996. http://dx.doi.org/10.1007/978-94-009-0297-8_154.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Allaire, Grégoire. "One-Phase Newtonian Flow." In Interdisciplinary Applied Mathematics, 45–76. New York, NY: Springer New York, 1997. http://dx.doi.org/10.1007/978-1-4612-1920-0_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Phase flow"

1

Bărglăzan, M., C. Velescu, T. Miloş, A. Manea, E. Dobândă, and C. Stroiţă. "Hydrodynamic transmission operating with two-phase flow." In MULTIPHASE FLOW 2007. Southampton, UK: WIT Press, 2007. http://dx.doi.org/10.2495/mpf070361.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Nagai, Ryoichi. "Complex Dynamic States in Multi-phase Traffic Model." In FLOW DYNAMICS: The Second International Conference on Flow Dynamics. AIP, 2006. http://dx.doi.org/10.1063/1.2204519.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Koibuchi, Hiroshi. "First-Order Phase Transition of Tethered Membrane Models." In FLOW DYNAMICS: The Second International Conference on Flow Dynamics. AIP, 2006. http://dx.doi.org/10.1063/1.2204565.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Shaked, Natan T., Bahram Javidi, Nir A. Turko, and Darina Roitshtain. "Quantitative phase microscopy of cells in flow using flipping interferometry (Conference Presentation)." In Quantitative Phase Imaging III, edited by Gabriel Popescu and YongKeun Park. SPIE, 2017. http://dx.doi.org/10.1117/12.2252341.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Kourakos, V. G., P. Rambaud, S. Chabane, D. Pierrat, and J. M. Buchlin. "Two-phase flow modelling within expansion and contraction singularities." In MULTIPHASE FLOW 2009. Southampton, UK: WIT Press, 2009. http://dx.doi.org/10.2495/mpf090031.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Yachi, S. "Phase Separation of Block Copolymers Driven by Oscillating Particles." In FLOW DYNAMICS: The Second International Conference on Flow Dynamics. AIP, 2006. http://dx.doi.org/10.1063/1.2204563.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Oguma, R. "Formation of Off-Phase Domains in L12 Type Ordering." In FLOW DYNAMICS: The Second International Conference on Flow Dynamics. AIP, 2006. http://dx.doi.org/10.1063/1.2204552.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Merchuk, Jose C. "EXPERIMENTS ON PHASE INVERSION IN AQUEOUS TWO-PHASE SYSTEMS." In International Symposium on Liquid-Liquid Two Phase Flow and Transport Phenomena. Connecticut: Begellhouse, 1997. http://dx.doi.org/10.1615/ichmt.1997.intsymliqtwophaseflowtranspphen.360.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Ames, R. G., and M. J. Murphy. "A methodology for momentum flux measurements in two-phase blast flows." In MULTIPHASE FLOW 2007. Southampton, UK: WIT Press, 2007. http://dx.doi.org/10.2495/mpf070041.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Belgacem, I., Y. Salhi, E. K. SI-Ahmed, J. Legrand, and J. M. Rosant. "Experimental investigation of slug pattern in a horizontal two-phase flow." In MULTIPHASE FLOW 2013. Southampton, UK: WIT Press, 2013. http://dx.doi.org/10.2495/mpf130351.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Phase flow"

1

Wallis, G. B. Two phase potential flow. Office of Scientific and Technical Information (OSTI), June 1991. http://dx.doi.org/10.2172/6213215.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Theilacker, Jay, and C. Rode. An Investigation Into Flow Regimes for Two Phase Helium Flow. Office of Scientific and Technical Information (OSTI), October 1987. http://dx.doi.org/10.2172/1151469.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Ishii, M., S. B. Kim, and R. Lee. Flow visualization study of inverted U-bend two-phase flow. Office of Scientific and Technical Information (OSTI), December 1986. http://dx.doi.org/10.2172/6839281.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Ouyang, Liang-Biao, S. Arbabi, and K. Aziz. General single phase wellbore flow model. Office of Scientific and Technical Information (OSTI), February 1997. http://dx.doi.org/10.2172/456347.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Maeder, P. F., and J. Kestin. Two-phase flow in geothermal systems. Office of Scientific and Technical Information (OSTI), August 1987. http://dx.doi.org/10.2172/5984665.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Soria, Julio. Dynamic-Active Flow Control - Phase I. Fort Belvoir, VA: Defense Technical Information Center, October 2006. http://dx.doi.org/10.21236/ada466362.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Farwagi, S. M. Computer Modelling of Two-Phase Flow. Fort Belvoir, VA: Defense Technical Information Center, October 1986. http://dx.doi.org/10.21236/ada175048.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Wallis, G. B. Two-Phase Potential Flow. Final report. Office of Scientific and Technical Information (OSTI), June 1999. http://dx.doi.org/10.2172/761114.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Kuhlman, Kristopher, and Jason Heath. Multicontinuum Flow Models for Assessing Two-Phase Flow in Containment Science . Office of Scientific and Technical Information (OSTI), June 2021. http://dx.doi.org/10.2172/1809129.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Hartnett, J. P. Single phase channel flow forced convection heat transfer. Office of Scientific and Technical Information (OSTI), April 1999. http://dx.doi.org/10.2172/335180.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Phase flow' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography