Books on the topic 'Penetration test'

Mayne, Paul W. Cone penetration testing. Washington, D.C: Transportation Research Board, National Research Council, 2007.

Construction Industry Research and Information Association., ed. Cone penetration testing: Methods and interpretation. London: Construction Industry Research and Information Association, 1987.

Salgado, Rodrigo. Pile design based on cone penetration test results. West Lafayette, Ind: Purdue University, [Joint Transportation Research Program, 1999.

Ali, Hesham A. Determination of frost penetration in LTPP test sections. McLean, VA: U.S. Dept. of Transportation, Federal Highway Administration, Research, Development, and Technology, Turner-Fairbank Highway Research Center, 1999.

Heijnen, W. J. Case studies of the Second European Symposium on Penetration Testing, ESOPT II. Delft: Delft Soil Mechanics Laboratory, 1985.

Sy, Alex. Dynamic performance of the Becker hammer drill and penetration test. Vancouver, B.C: Dept. of Civil Engineering, University of British Columbia, 1992.

Wride, C. E. CANLEX, the Canadian liquefaction experiment. Richmond, B.C: Bi Tech Publishers, 1997.

1949-, Wood David, ed. Pressuremeter testing: Methods and interpretation. London: CIRIA, 1987.

16, ISSMFE Technical Committee on Penetration Testing of Soils-TC. Report of the ISSMFE Technical Committee on Penetration Testing of Soils--TC 16, with reference test procedures, CPT-SPT-DP-WST. Linköping, Sweden: Swedish Geotechnical Society, 1989.

Briaud, Jean-Louis. The pressuremeter. Rotterdam: Balkema, 1992.

Frost, A. J. D. Uses and efficacy of the cone penetration test: Isleport Business Park. London: Middlesex Polytechnic, 1990.

Coerts, Alfred. Analysis of static cone penetration test data for subsurface modelling: A methodology. Utrecht: Koninklijk Nederlands Aardrijkskundig Genootschap/Faculteit Ruimtelijke Wetenschappen Universiteit Utrecht, 1996.

Carter, Robert R. Cone penetration testing for evaluating the liquefaction potential of sands. Denver, Colo: Geotechnical Services Branch, Research and Laboratory Services Division, U.S. Dept. of the Interior, Bureau of Reclamation, 1988.

International, Symposium on Pressuremeters (4th 1995 Sherbrooke Québec). The Pressuremeter and its new avenues: Proceedings of the 4th international symposium, Sherbrooke, Québec, 17-19 May 1995. Rotterdam: A.A. Balkema, 1995.

Woeller, D. J. Use of recent cone penetration test technology in evaluating geotechnical properties of mine waste. S.l: s.n, 1989.

Farrar, Jeffrey A. Study of in situ testing for evaluation of liquefaction resistance. Denver, Colo: Geotechnical Services Branch, Research and Laboratory Services Division, Denver Office, U.S. Dept. of the Interior, Bureau of Reclamation, 1990.

Tschuschke, Wojciech. Sondowania statyczne w odpadach poflotacyjnych. Gliwice: Wydawn. Politechniki Śląskiej, 2006.

W, Mayne Paul, and Robertson Peter Kay 1949-, eds. Geotechnical site characterization: Proceedings of the First International Conference on Site Characterization, ISC'98, Atlanta, Georgia, 19-22 April 1998. Rotterdam: Balkema, 1998.

Crapo, H. S. Containment penetration system (CPS) tests under accident loads. Washington, DC: Division of Engineering, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission, 1988.

Hildebrand, Martin. A comparison of FRP-sandwich penetrating impact test methods. Espoo: VTT, Technical Research Centre of Finland, 1996.

Lovell, Parish. Geotechnical investigations report of the piping failure of Anita Dam: Second phase of additional investigations (drilling, standard penetration tests, and additional laboratory testing). [Place of publication not identified: publisher not identified], 1997.

Nacht, Clancy, and Thursday Euclid. Penetration Test. Independently Published, 2019.

Penetration Testing. Thomas Telford Ltd, 1989.

The Standard Penetration Test (Report). Construction Industry Research and Information Ass, 1995.

Geological Survey (U.S.), ed. Subsurface exploration with the cone penetration testing truck. [Reston, Va.?: U.S. Dept. of the Interior, U.S. Geological Survey], 2003.

Ahmed, Intisab. Cone penetration test: Application to soil and cemented paste backfills. 2002, 2002.

Briaud, Jean-Louis. Pressuremeter. CRC Press LLC, 2019.

Briaud, Jean-Louis. Pressuremeter. CRC Press LLC, 2019.

Knox, Kenneth James. Applications of the electronic cone penetration test for the geotechnical site investigation of Florida soils. 1989.

Briaud, Jean-Louis. Pressuremeter. CRC Press LLC, 2019.

Briaud, Jean-Louis. Pressuremeter. CRC Press LLC, 2019.

Institution of Civil Engineers (Great Britain), ed. Penetration testing in the UK: Proceedings of the geotechnology conference organized by the Institution of Civil Engineers and held in Birmingham on 6-8 July 1988. London: Thomas Telford, 1989.

McGrath, Patrick F. Development of test methods for predicting chloride penetration into high performance concrete. 1996.

Piezocone and Cone Penetration Test (CPTu and CPT) Applications in Foundation Engineering. Elsevier, 2020. http://dx.doi.org/10.1016/c2017-0-04195-2.

1949-, Bennett M. J., and Geological Survey (U.S.), eds. Subsurface geotechnical investigations near sites of ground deformation caused by the January 17, 1994, Northridge, California, earthquake. Menlo Park, Calif: U.S. Dept. of the Interior, U.S. Geological Survey, 1998.

-L, Briaud J., Audibert Jean M. E, ASTM Committee D-18 on Soil and Rock., United States. Minerals Management Service. Technology Assessment and Research Program., U.S. Army Engineer Waterways Experiment Station., and International Symposium on the Pressuremeter and Its Marine Applications (2nd : 1986 : Texas A&M University, College Station), eds. The Pressuremeter and its marine applications: Second international symposium. Philadelphia, PA: ASTM, 1986.

Software Test Attacks To Break Mobile And Embedded Devices. Taylor & Francis Inc, 2013.

I, Knab Lawrence, and National Institute of Justice (U.S.), eds. Development of a test method to evaluate the penetration resistance of high-security glazing subjected to mechanical impact and heat. Washington, D.C: U.S. Dept. of Justice, National Institute of Justice, 1986.

I, Knab Lawrence, and National Institute of Justice (U.S.), eds. Development of a test method to evaluate the penetration resistance of high-security glazing subjected to mechanical impact and heat. Washington, D.C: U.S. Dept. of Justice, National Institute of Justice, 1986.

Association, Portland Cement, ed. Water penetration tests of masonry walls. [Skokie, Ill.]: Portland Cement Association, 1991.

Robertson. GEOTECHNICAL SITE CHARACTERIZATION V1. Taylor & Francis, 1998.

Robertson. GEOTECHNICAL SITE CHARACTERIZATION 2 VOL. Taylor & Francis, 1998.

Robertson. GEOTECHNICAL SITE CHARACTERIZATION V2. Taylor & Francis, 1998.

Center, Turner-Fairbank Highway Research, ed. Determination of pile driveability and capacity from penetration tests. McLean, VA: U.S. Dept. of Transportation, Federal Highway Administration, Research and Development, Turner-Fairbank Highway Research Center, 1997.

J, Aitken R., and Special Programme of Research, Development, and Research Training in Human Reproduction (World Health Organization), eds. The zona-free hamster oocyte penetration test and the diagnosis of male fertility: Proceedings of a workshop sponsored by the World Health Organization Special programme of Research Development and Research Training in Human Reproduction, Boston, May 3, 1985. Copenhagen: Scriptor, 1986.

Social Engineering Penetration Testing: Executing Social Engineering Pen Tests, Assessments and Defense. Elsevier Science & Technology Books, 2014.

Visintini, L. Wind Tunnel Tests of a Deep Seabed Penetrator Model. Stationery Office Books, 1991.

Geological Survey (U.S.), ed. Embedment, penetration, hole closure, and related geotechnical tests associated with subseafloor nuclear waste disposal. [Reston, Va.?]: Dept. of the Interior, U.S. Geological Survey, 1987.

Embedment, penetration, hole closure, and related geotechnical tests associated with subseafloor nuclear waste disposal. [Reston, Va.?]: Dept. of the Interior, U.S. Geological Survey, 1987.

Embedment, penetration, hole closure, and related geotechnical tests associated with subseafloor nuclear waste disposal. [Reston, Va.?]: Dept. of the Interior, U.S. Geological Survey, 1987.