Academic literature on the topic 'PDMS-based'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'PDMS-based.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "PDMS-based"
Bergeron, V., P. Cooper, C. Fischer, J. Giermanska-Kahn, D. Langevin, and A. Pouchelon. "Polydimethylsiloxane (PDMS)-based antifoams." Colloids and Surfaces A: Physicochemical and Engineering Aspects 122, no. 1-3 (April 1997): 103–20. http://dx.doi.org/10.1016/s0927-7757(96)03774-0.
Full textLopera, S., and R. D. Mansano. "Plasma-Based Surface Modification of Polydimethylsiloxane for PDMS-PDMS Molding." ISRN Polymer Science 2012 (April 3, 2012): 1–5. http://dx.doi.org/10.5402/2012/767151.
Full textZhang, Y., F. Karasu, C. Rocco, L. G. J. van der Ven, R. A. T. M. van Benthem, X. Allonas, C. Croutxé-Barghorn, A. C. C. Esteves, and G. de With. "PDMS-based self-replenishing coatings." Polymer 107 (December 2016): 249–62. http://dx.doi.org/10.1016/j.polymer.2016.11.026.
Full textYou, Jae Bem, Kyowon Kang, Thanh Tinh Tran, Hongkeun Park, Wook Ryol Hwang, Ju Min Kim, and Sung Gap Im. "PDMS-based turbulent microfluidic mixer." Lab on a Chip 15, no. 7 (2015): 1727–35. http://dx.doi.org/10.1039/c5lc00070j.
Full textPergal, Marija, Jelena Nestorov, Gordana Tovilovic-Kovacevic, Petar Jovancic, Lato Pezo, Dana Vasiljevic-Radovic, and Jasna Djonlagic. "Surface characterization, hemo- and cytocompatibility of segmented poly(dimethylsiloxane)-based polyurethanes." Chemical Industry 68, no. 6 (2014): 731–41. http://dx.doi.org/10.2298/hemind141103082p.
Full textKwon, Dae-Hyeon, Jaebum Jeong, Yongju Lee, Jun-Kyu Park, Suwoong Lee, Jin-Hyuk Bae, and Hyeok Kim. "Carbon Nano Tube-Polymer Hybrid Nanocomposite Electrodes for Porous Polydimethylsiloxane Sponge-Based Flexible Triboelectric Nanogenerators." Journal of Nanoscience and Nanotechnology 21, no. 9 (September 1, 2021): 4680–84. http://dx.doi.org/10.1166/jnn.2021.19297.
Full textTan, Xueqiang, and Jimin Zheng. "A Novel Porous PDMS-AgNWs-PDMS (PAP)-Sponge-Based Capacitive Pressure Sensor." Polymers 14, no. 8 (April 7, 2022): 1495. http://dx.doi.org/10.3390/polym14081495.
Full textKim, Jinook, Mikyung Park, Gee Sung Chae, and In-Jae Chung. "Influence of un-cured PDMS chains in stamp using PDMS-based lithography." Applied Surface Science 254, no. 16 (June 2008): 5266–70. http://dx.doi.org/10.1016/j.apsusc.2008.02.074.
Full textŠustková, Alena, Klára Konderlová, Ester Drastíková, Stefan Sützl, Lenka Hárendarčíková, and Jan Petr. "Rapid Production of PDMS Microdevices for Electrodriven Separations and Microfluidics by 3D-Printed Scaffold Removal." Separations 8, no. 5 (May 14, 2021): 67. http://dx.doi.org/10.3390/separations8050067.
Full textXu, Guang Tao, Yi Qing Gao, Feng Li, Xiao Feng Cui, and Guo Wen Kuang. "Design and Fabrication of PDMS MLA Based on Digital Maskless Lithography Method." Advanced Materials Research 1091 (February 2015): 71–76. http://dx.doi.org/10.4028/www.scientific.net/amr.1091.71.
Full textDissertations / Theses on the topic "PDMS-based"
Vila, i. Planas Jordi. "PDMS-based opto uidic systems." Doctoral thesis, Universitat Autònoma de Barcelona, 2014. http://hdl.handle.net/10803/284136.
Full textAlong the thesis, several optics and fluidics elements are succesfully integrated in fully functional optouidic systems. Integration of these elements using soft-lithography fabrication technique and PDMS as constituent material ensures low-cost, disposable and flexible LOCs systems. Developed elements are individually characterized and LOCs are characterized and tested as (bio)chemical tools to overcome unsolved issues of the present state of the art in LOC applications. Design, optimization, fabrication and characterization of individual optical elements is outlined. Optical elements have been divided in two categories, passive and active elements. Passive elements are those which do not require an energy source to work. Firstly, the most simple elements, i.e., collimation lenses and self-alignment structures, necessary to create more complex structures. Such elements usually were published previously, but our development and optimization of elements as well as auxiliary structures, e.g., stoppers and self-alignment channels, built using a single technology with no increase of fabrication steps, provide a robust approach to create more complex structures. Air mirrors and lenses are combined to create beam splitters. The major issue of the BS is the deviation of output power between channels. This result suggests that some misalignment in the fibre position, the lens collimation or the waveguide geometry has occurred. Using developed MIMIC variations a new passive optical element are designed, fabricated and characterized. PDMS doped with three different pigments are used to create filters with stopbands along the whole visible spectrum. Finally, an active element, an integrated emitter, is redesigned using TracePro simulation software. Simulation results suggest there are dead volumes inside the emitter chamber. Then, size reduction and shape change is proposed. Integration of many of the these optical plus some fluidic elements is explained. Firstly, different connectors between modules are designed and tested. The previously redesigned integrated emitter are manufactured and characterized. Its behaviour matches with simulations results and suggest a further size reduction is not only possible but also recommendable. All the modules are fabricated from two PDMS replicas. Each module is elastic and can be assembled with other modules in any substrate, modules connections are not permanent and can be plug and unplug with no previous knowledge in microfluidics or LOC. Hence, presented modular system have enough flexibility to create LOC on demand to researchers without the background required to design and manufacture LOC systems from scratch. In order to prove it several modules are tested together in a crystal violet concentration determination. Previously reported collimation lenses are monolithically integrated in a monodisperse microdroplets generator. Two different optical configurations have been proposed in order to make possible fluorescence and absorbance measurement of droplets. Both are tested and compared to previous set up with equivalent results. In addition, proposed configurations can detect unlabelled droplets, a feature that was not possible with the previous set up, with the same precision and reliability. However, due to our collimation lenses and readout equipment, the droplet generation rate is limited to 160 drops/s. Finally, screening of droplet inner medium is experimentally proved for first time in optofluidic system. Afterwards, a compact and integrable fluidically controlled optical router (FCOR) is build using soft-lithographic techniques and made entirely of PDMS and air ensuring low-cost and robustness. Phaseguides, has been exploited to create a FCOR with a movable mirror without mobile parts. The LOC is repetitive, and has a good durability (non appreciable degradation or performance deterioration for weeks, in the whole visible spectrum). Finally, FCOR is integrated in a previously reported LOC performing parallel measurements of glucose and lactate with a single light source. After setup calibration, the FCOR allows parallel measurement of glucose and lactate showing good agreement with previous results. Validating then, the FCOR for parallel analysis.
Ozkan, Ekrem. "PDMS-based antimicrobial surfaces for healthcare applications." Thesis, University College London (University of London), 2018. http://discovery.ucl.ac.uk/10044839/.
Full textLamperti, Emanuele. "PDMS based microfluidics membrane contactors for CO2 removal applications." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2018. http://amslaurea.unibo.it/15261/.
Full textSommer, Stacy Ann. "Siloxane-Polyurethane Fouling-Release Coatings Based On PDMS Macromers." Diss., North Dakota State University, 2011. https://hdl.handle.net/10365/29313.
Full textOffice of Naval Research (U.S.)
Gong, Xiuqing. "PDMS based microfluidic chips and their application in material synthesis /." View abstract or full-text, 2009. http://library.ust.hk/cgi/db/thesis.pl?NSNT%202009%20GONG.
Full textSamel, Björn. "Novel Microfluidic Devices Based on a Thermally Responsive PDMS Composite." Doctoral thesis, KTH, Mikrosystemteknik, 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-4470.
Full textQC 20100817
Samel, Björn. "Novel microfluidic devices based on a thermally responsive PDMS composite /." Stockholm : Kungliga Tekniska högskolan, 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-4470.
Full textTabarizadeh, Elham. "PDMS-based membranes for dehydration of Triethylene glycol using pervaporation technology." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2018.
Find full textForster, Simon. "Surface modification of PDMS-based microfluidic devices through plasma polymerisation : production and application." Thesis, University of Sheffield, 2010. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.531221.
Full textAbraham, Berhane Teclesenbet. "Degradation and recovery of polydimethylsiloxane (PDMS) based composites used as high voltage insulators." Thesis, Stellenbosch : Stellenbosch University, 2004. http://hdl.handle.net/10019.1/49902.
Full textENGLISH ABSTRACT: Polydimethylsiloxane (PDMS) compounds are utilized in outdoor high voltage insulation due to their low weight, vandalism resistance, better anti-contamination performance and their superior hydrophobic nature. Under severe environmental conditions and over prolonged service time, however, the hydrophobic surface can gradually become hydrophilic and then recover with adequate resting period. In this study, room temperature vulcanized (RTV) PDMS samples were prepared with different formulations and then exposed to corona discharge to evaluate its effect. The influence of different additives, such as different types and amount of fillers and additionally added low molar mass silicone oils, on the hydrophobicity recovery of the material was investigated. The effects of two types of corona treatment were also evaluated. Hydrophobicity recovery of corona and UV-C aged PDMS samples was evaluated by means of static contact angle measurements. Positron annihilation spectroscopy (PAS) gave important information on the micro structural change after corona treatment of RTV PDMS as well as naturally aged high temperature vulcanized (HTV) PDMS samples. The different formulations of the RTV PDMS samples and the effect of the additives were studied with this technique. The formation of a thin, highly crosslinked inorganic silica-like (SiOx) layer was confirmed even at the early stage of degradation. It was also possible to estimate the thickness of the silica-like layer formed during corona exposure that is responsible for the loss and recovery of hydrophobicity. The surface hardness and hydrophilicity change of PDMS samples due to corona treatment were studied simultaneously with force distance measurements by atomic force microscopy (AFM). The adhesive force calculated from the pull-off force-distance curves showed that the adhesive force between the probe and the sample decreased with increasing corona treatment time, indicating hydrophobicity recovery. In addition to this, the increase in hardness after corona exposure provides indirect evidence of the formation of a silica-like layer. In all cases the hydrophilicity and the surface hardness of the PDMS samples increased directly after corona treatment and recovered with time. Two types of FTIR spectroscopy were used to analyse the surface of the polymer.
AFRIKAANSE OPSOMMINGS: Polidimetielsiloksaan (PDMS) word in buitelug hoogspanninginsulasie gebruik as gevolg van sy lae massa, weerstand teen vandalisme, verbeterde anti-kontaminasie werkverrigting en superieure hidrofobiese karakter. Die hidrofobiese oppervlakte kan egter gelydelik hidrofillies word onder uiterste omgewingsomstandighede en oor langdurige dienstyd. PDMS materiaal herstel egter nadat dit genoeg rustyd toegelaat is. Kamertemperatuur-gevulkaniseerde (KTV) PDMS met verskillende formulasies is in hierdie studie voorberei, aan korona ontlading blootgestel, geëvalueer en vergelyk. Die invloed van bymiddels soos verskillende tipes en hoeveelhede vuiler, asook addisionele lae molekulêre massa silikoonolie, op die herstel van hidrofobisiteit van die materiaal is ondersoek. Twee verskillende metodes van korona behandeling is ook geëvalueer. Die herstel van hidrofobisiteit van korona en UV-C verouderde PDMS monsters is met statiese kontakhoekmeting geëvalueer. Positronvernietigingspektroskopie (PVS) is 'n kragtige tegniek wat belangrike inligting oor die mikrostrukturele verandering van korona behandelde van KTV PDMS sowel as natuurlik-verouderde hoë temperatuur gevulkaniseerde (HTV) PDMS monsters gee. Die verskillende formulasies van die KTV PDMS monsters, sowel as die effek van die vullers, is met behulp van hierdie tegniek ondersoek. Die vorming van 'n dun, hoogskruisgebinde, anorganiese silika-agtige (SiOx) laag op die PDMS oppervlak, selfs tydens die vroeë stadium van degradasie, is bevestig. Dit was ook moontlik om die dikte van die silika-agtige laag wat gedurende die korona blootstelling gevorm het, en wat verantwoordelik is vir die verlies aan hidrofobisiteit, te bepaal. Die oppervlakhardheid en hidrofilisiteit verandering van PDMS monsters as gevolg van korona behandeling, was gelyktydig met krag-afstand metings deur middel van atoomkragmikroskopie (AKM) bestudeer. Die kleefkrag, soos bereken van aftrek kragafstandkurwes, dui daarop dat kleefkragte tussen die taster en die monster afneem met toenemende korona behandelingstyd, wat beduidend is op die herstel van hidrofobisiteit. Daarbenewens is die toename van oppervlakhardheid na korona blootstelling "n indirekte bewys van die formasie van 'n silika-agtige laag. In alle gevalle het die hidrofilisiteit en die oppervlakhardheid van die PDMS monsters toegeneem direk na afloop van korona behandeling en gevolglik herstel met tyd. Twee tipes IR spektroskopie metodes is gebruik vir die chemiese-oppervlak analises
Books on the topic "PDMS-based"
Wei, Li. Dual function magnetic PDMS microsphere-based microfluidic valve and mixer. 2005.
Find full textBook chapters on the topic "PDMS-based"
Bonifati, Angela, Gianvito Summa, Esther Pacitti, and Fady Draidi. "Query Reformulation in PDMS Based on Social Relevance." In Transactions on Large-Scale Data- and Knowledge-Centered Systems XIII, 59–90. Berlin, Heidelberg: Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-662-45942-3_3.
Full textSharma, Amit, and Poonam Agarwal. "Triboelectric-Based Kinetic Energy Harvesting Using Polydimethylsiloxane (PDMS)." In Advances in Polymer Sciences and Technology, 75–81. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-2568-7_8.
Full textPires, Carlos Eduardo, Damires Souza, Thiago Pachêco, and Ana Carolina Salgado. "A Semantic-Based Ontology Matching Process for PDMS." In Lecture Notes in Computer Science, 124–35. Berlin, Heidelberg: Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-642-03715-3_11.
Full textGallo, Simon, and Hannes Bleuler. "A Flexible PDMS-Based Multimodal Pulse and Temperature Display." In Lecture Notes in Electrical Engineering, 55–58. Tokyo: Springer Japan, 2015. http://dx.doi.org/10.1007/978-4-431-55690-9_10.
Full textYamamoto, T., T. Nojima, and T. Fujii. "Cell-Free Protein Synthesis in PDMS-Based Parallel Microreactors." In Micro Total Analysis Systems 2001, 69–71. Dordrecht: Springer Netherlands, 2001. http://dx.doi.org/10.1007/978-94-010-1015-3_24.
Full textAmiri, Sahar, Mohammad Ali Semsarzadeh, and Sanam Amiri. "Synthesis and Characterization of PDMS Based Triblock and Pentablock Copolymers." In SpringerBriefs in Molecular Science, 13–24. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-09225-6_3.
Full textAmiri, Sahar, Mohammad Ali Semsarzadeh, and Sanam Amiri. "Polyrotaxane Based on Inclusion Complexes of OH-PDMS-OH and Br-PDMS-Br with γ-Cyclodextrin Without Utilizing Sonic Energy." In SpringerBriefs in Molecular Science, 5–12. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-09225-6_2.
Full textNagai, Hidenori, Masayuki Matsubara, Kenji Chayama, Joji Urakawa, Yasuhiko Shibutani, Yoshihide Tanaka, Sahori Takeda, and Shinichi Wakida. "Fabrication of Electrophoretic PDMS/PDMS Lab-on-a-chip Integrated with Au Thin-Film Based Amperometric Detection for Phenolic Chemicals." In Atmospheric and Biological Environmental Monitoring, 275–84. Dordrecht: Springer Netherlands, 2009. http://dx.doi.org/10.1007/978-1-4020-9674-7_19.
Full textRehman, Tariq, Ahmad’ Athif Mohd Faudzi, Dyah Ekashanti Octorina Dewi, and Mohamed Sultan Mohamed Ali. "Finite Element Analysis for PDMS Based Dual Chamber Bellows Structured Pneumatic Actuator." In Communications in Computer and Information Science, 392–402. Singapore: Springer Singapore, 2017. http://dx.doi.org/10.1007/978-981-10-6463-0_34.
Full textKim, Jun-Min, and Jong-Mo Seo. "Fabrication of Polydimethylsiloxane (PDMS) - Based Flexible Electrode Array for Improving Tissue Contact." In IFMBE Proceedings, 341–44. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-11128-5_85.
Full textConference papers on the topic "PDMS-based"
Argueta-Diaz, Victor, and Brianna Fitzpatrick. "PDMS-based microstructured biosensor." In Organic Photonic Materials and Devices XXI, edited by Christopher E. Tabor, François Kajzar, and Toshikuni Kaino. SPIE, 2019. http://dx.doi.org/10.1117/12.2506291.
Full textHenle, C., C. Hassler, F. Kohler, M. Schuettler, and T. Stieglitz. "Mechanical characterization of neural electrodes based on PDMS-parylene C-PDMS sandwiched system." In 2011 33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE, 2011. http://dx.doi.org/10.1109/iembs.2011.6090142.
Full textPires, Carlos Eduardo, Paulo Sousa, Zoubida Kedad, and Ana Carolina Salgado. "Summarizing ontology-based schemas in PDMS." In 2010 IEEE 26th International Conference on Data Engineering Workshops (ICDEW 2010). IEEE, 2010. http://dx.doi.org/10.1109/icdew.2010.5452706.
Full textFoland, Steven, Ke Liu, Kyung-Hak Choi, Duncan MacFarlane, and Jeong-Bong Lee. "A PDMS-based pressure-tunable nanograting." In 2011 IEEE 11th International Conference on Nanotechnology (IEEE-NANO). IEEE, 2011. http://dx.doi.org/10.1109/nano.2011.6144497.
Full textWang, Haichuan, Peinan Mao, Hongwei Lv, and Huiling Peng. "Flexible Pulse Sensor Based on PDMS/MWCNTs." In 2020 3rd International Conference on Advanced Electronic Materials, Computers and Software Engineering (AEMCSE). IEEE, 2020. http://dx.doi.org/10.1109/aemcse50948.2020.00147.
Full textRiedl, X., C. Bolzmacher, R. Wagner, K. Bauer, and N. Schwesinger. "A novel PDMS based capacitive pressure sensor." In 2010 Ninth IEEE Sensors Conference (SENSORS 2010). IEEE, 2010. http://dx.doi.org/10.1109/icsens.2010.5690709.
Full textSimorangkir, Roy B. V. B., Shilun Feng, Abu Sadat Sayem, Karu P. Esselle, and Yang Yang. "PDMS-Embedded Conductive Fabric: A Simple Solution for Fabricating PDMS-Based Wearable Antennas with Robust Performance." In 2018 12th International Symposium on Medical Information and Communication Technology (ISMICT). IEEE, 2018. http://dx.doi.org/10.1109/ismict.2018.8573690.
Full textKlammer, I., A. Buchenauer, G. Dura, W. Mokwa, and U. Schnakenberg. "A novel valve for microfluidic PDMS-based systems." In 2008 IEEE 21st International Conference on Micro Electro Mechanical Systems. IEEE, 2008. http://dx.doi.org/10.1109/memsys.2008.4443734.
Full textZhan, Zhikun, Ping Yao, Zaili Dong, Steve Tung, Jacob Hohnbaum, Balaji Srinivasan, and Wen J. Li. "Insulin detection based on a PDMS microfluidic system." In 2010 IEEE 4th International Conference on Nano/Molecular Medicine and Engineering (NANOMED). IEEE, 2010. http://dx.doi.org/10.1109/nanomed.2010.5749815.
Full textZong-Ming Su, Xiao-Sheng Zhang, Meng-Di Han, Xiao-Liang Cheng, Xia Jiang, Xiang-Zhi Yin, and Hai-Xia Zhang. "Honeycomb-patterned PDMS membrane based on nanosphere lithography." In 2015 IEEE 10th International Conference on Nano/Micro Engineered and Molecular Systems (NEMS). IEEE, 2015. http://dx.doi.org/10.1109/nems.2015.7147493.
Full textReports on the topic "PDMS-based"
Maiti, A., T. H. Weisgraber, and L. N. Dinh. Radiation-induced aging of PDMS Elastomer TR-55: a summary of constitutive, mesoscale, and population-based models. Office of Scientific and Technical Information (OSTI), November 2016. http://dx.doi.org/10.2172/1338168.
Full textConrady, Morgan, Markus Bauer, Kyoo Jo, Donald Cropek, and Ryan Busby. Solid-phase microextraction (SPME) for determination of geosmin and 2-methylisoborneol in volatile emissions from soil disturbance. Engineer Research and Development Center (U.S.), October 2021. http://dx.doi.org/10.21079/11681/42289.
Full text