Academic literature on the topic 'Partikel'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Partikel.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Partikel"

1

Maulida, Cut Rizka, Mursal Mursal, and Ismail Ismail. "A Study on the utilization of coffee grounds for particle board." Journal of Aceh Physics Society 10, no. 2 (April 14, 2021): 48–52. http://dx.doi.org/10.24815/jacps.v10i2.19063.

Full text
Abstract:
Abstrak. Penelitian ini bertujuan untuk membuat papan partikel dengan menggunakan limbah ampas kopi dan resin epoksi sebagai perekat. Komposisi resin epoksi divariasikan yaitu 5, 10, 15 dan 20 vol.% untuk masing-masing partikel ampas kopi berukuran 20 dan 40 mesh. Papan partikel dibuat dengan teknik pressing dengan beban sebesar 9 ton selama 30 menit. Sifat mekanik yang diuji adalah MOE, MOR, dan kuat tekan. Sifat fisis papan partikel yang diuji adalah kerapatan dan pengembangan tebal. Hasil menunjukkan bahwa nilai MOE tertinggi yaitu 20,910 kgf/cm2 pada komposisi 95 vol.% ampas kopi dan 5 vol.% resin epoksi dengan ukuran ampas kopi 40 mesh. MOR tertinggi yaitu 167 kgf/cm2 pada ukuran partikel 40 mesh dengan komposisi ampas kopi 90 vol.% dan resin epoksi 10 vol.%. Nilai kuat tekan tertinggi diperoleh 220 kgf/cm2 pada 20 mesh, dengan komposisi 85 vol.% ampas kopi dan 15 vol.% resin epoksi. Kerapatan dan pengembangan tebal papan partikel yang tertinggi masing-masing adalah 1,16 g/cm3 dan 0,85%. Secara umum, sifat mekanis papan partikel ampas kopi tergantung pada komposisi dan ukuran partikel ampas kopi. Namun, sifat fisisnya tidak berubah secara signifikan untuk ukuran partikel dan komposisi yang berbeda. Papan partikel yang diperoleh dari penelitian ini memenuhi standar ANSI sehingga berpotensi untuk dijadikan sebagai papan partikel atau komposit. Abstract.. This study aims to make a particle board using coffee ground waste and epoxy resin as an adhesive. The composition of the epoxy resin was varied, namely 5, 10, 15 and 20 vol.% for 20 mesh and 40 mesh of coffee grounds particles. Particle board is made by pressing technique with a load of 9 tons for 30 minutes. The mechanical properties tested were MOE, MOR, and compressive strength. The physical properties of the particle board tested were density and thickness swelling. The results showed that the highest MOE particle board was 20.910 kgf/cm2 (95 vol.% coffee grounds:5 vol.% epoxy resin; 40 mesh). The highest MOR was 167 kgf/cm2 (90 vol.% coffee grounds:10 vol.% epoxy resin;40 mesh). The hihgest compressive strength values was 220 kgf/cm2 (85 vol.% coffee grounds:15 vol.% epoxy resin;20 mesh). The highest density and thickness expansion were 1.16 g/cm3 and 0.85%, respectively. In general, the mechanical properties of coffee grounds particleboard depend on the composition and particle size of coffee grounds. However, their physical properties do not change significantly for different particle sizes and compositions. The particle board obtained from this study meets the standard of ANSI. Thus, coffee grounds have the potential to be used as particle board or composite. Keywords particle board, coffee grounds, epoxy resin, mechanical properties, physical properties
APA, Harvard, Vancouver, ISO, and other styles
2

Najihah, Yeni Fathatun, Dwi Puryanti, and Yuli Yetri. "Pengaruh Komposisi Kulit Buah Kakao, Ampas Tebu, dan Perekat terhadap Sifat Fisis dan Mekanis Papan Partikel dari Campuran Limbah Kulit Buah Kakao dan Ampas Tebu." Jurnal Fisika Unand 7, no. 1 (January 3, 2018): 8–14. http://dx.doi.org/10.25077/jfu.7.1.8-14.2018.

Full text
Abstract:
Penelitian ini bertujuan untuk mengetahui perlakuan bahan terbaik terhadap sifat fisis dan mekanis papan partikel. Dalam penelitian ini digunakan dua variasi perlakuan bahan, yaitu perbandingan komposisi bahan dan jumlah perekat. Variasi komposisi bahan yang digunakan antara kulit buah kakao dan ampas tebu adalah 100:0%, 75:25%, 50:50%. Kadar perekat isosianat yang digunakan adalah 12%, 14%, dan 16%. Ukuran panjang serat ampas tebu yang digunakan adalah 3 cm. Parameter yang diukur adalah kadar air, kerapatan, daya serap air, keteguhan patah, kuat tekan sejajar permukaan dan kekuatan rekat internal. Didapatkan papan partikel terbaik adalah papan partikel dengan perbandingan komposisi bahan 50:50% dengan kadar perekat 16%. Hasil penelitian menunjukkan bahwa nilai sifat fisis yang dihasilkan memenuhi standar JIS A 5908 (2003), SNI 03-2105-2006, dan FAO (1996). Namun pada pengujian sifat mekanis terdapat beberapa nilai MOR papan partikel yang tidak memenuhi standar. Berdasarkan persentase densitas papan partikel maka papan partikel yang dihasilkan termasuk jenis medium density particle board hingga high density particle board.Kata kunci: kulit buah kakao, ampas tebu, perekat isosianat, papan partikel
APA, Harvard, Vancouver, ISO, and other styles
3

Wahya, Wahya. "Dimensi Sintaksis dan Semantik Partikel Euy dalam Novel Budak Teuneung Karya Samseodi." Metahumaniora 9, no. 1 (July 30, 2019): 1. http://dx.doi.org/10.24198/metahumaniora.v9i1.22875.

Full text
Abstract:
Partikel euy merupakan salah satu partikel fatis dalam bahasa Sunda. Partikel ini, sebagaimana partikel fatis lain, tidak memiliki fungsi sintaksis dalam kalimat, yakni sebagai unsur ekstraposisi dalam kalimat. Tulisan ini yang berjudul “Dimensi Sintaksis dan Semantik Partikel Euy dalam Novel Budak Teuneung”membahas perilaku sintaksis partikel euy, yaitu keberadaannnya dalam jenis kalimat berdasarkan bentuk sintaksisnya, dan makna gramatikal partikel euy dalam lingkungan kalimat deklaratif, interogatif, imperatif, dan eksklamatif. Metode penelitian ini bersifat deskriptif kualitatif. Data dikumpulkan dengan menggunakan metode simak dengan teknk catat. Selanjutnya, data dianalisis menggunakan metode agih atau distribusional. Sumber data yang digunakan adalah novel anak-anak yang berjudul Budak Teuneung (2018) karya Samsoedi. Berdasarkan hasil penelitian, ditemukan 46 data kalimat yang memuat partikel euy. Berdasarkan analisis terhadap 46 data tersebut dengan pendekatan sintaksis dan semantik, dapat disimpulkan bahwa partikel euy dapat berposisi di awal, di tengah, atau di akhir kalimat deklaratif, tetapi dominan berposisi di tengah kailimat. Partikel euy hanya berposisi di tengah dan di akhir kalimat interogatif, tidak ada yang berposisi di awal kalimat. Partikel euy dapat berposisi di awal, di tengah, dan di akhir kalimat imperatif, tetapi dominan berposisi di akhir kalimat. Partikel euy hanya berposisi di awal dan di akhir kalimat eksklamatif, tidak ada yang berposisi di tengah kalimat. Secara semantik, partikel euy bersama jenis kalimat yang memuatnya memiliki keragaman makna gramatikal. Secara umum dapat dikatakan partikel euy beserta unsur lingusitik yang mendampinginya dalam kalimat deklaratif memiliki makna ‘meberitahukan atau menyatakan sesuatu’; dalam kalimat interogatif, memiliki makna ‘meminta sesuatu’; dalam kalimat imperatif, memiliki makna ‘meminta sesuatu’ atau ‘memerintahkan sesuatu’; dalam kalimat eksklamataif. memiliki makna ‘mengungkapkan atau menyampaikan sesuatu’.Particle euy is just one-structured particles in the Sundanese language. This particle, as another particles phatic, does not have the syntactic function in the sentence, namely as an element in extraposition sentence. This article entitled "Dimensions of Syntax and Semantics of the Euy Particle in Novel of Budak Teuneung" discuses the behavior of particles in syntax dimension, namely it’s distribution in the type of sentence based on syntactic and grammatical meaning of particles in the environment, namely in declarative sentences, interrogative, imperative, and exclamative ones. This research method is descriptive qualitative. Data collected by using observation techniques to record. Furthermore, the data were analyzed using distributional method. Source data used is a children's novel titled Budak Teuneung (2018) written by Samsoedi. Based on the results of the study, found that 46 data sentence contains particles here. Based on an analysis of 46 data with the approach of syntax and semantics, it can be concluded that the particle euy can be positioned at the beginning, in the middle, or at the end of a declarative sentence, but a dominant position in the middle; particle euy simply positioned in the middle and at the end of interrogative sentences, no position early in the sentence; particle euy can be positioned at the beginning, in the middle, and at the end of the imperative sentence, but a dominant position in the end of the sentence; particle euy only just plays in the beginning and at the end of the exclamative sentence, no position in the middle of a sentence. Semantically, particle euy with the kind of sentences contain a variety of grammatical meaning. Generally speaking, the particle with linguistic elements that accompany the declarative sentences have meaning 'report missing or declared something'; interrogative sentences have meaning 'ask anything'; imperative sentences have meaning 'ask anything' or 'ordered something'; exclamative sentences have meaning 'reveal or convey something'.
APA, Harvard, Vancouver, ISO, and other styles
4

Wahya, Wahya. "Dimensi Sintaksis dan Semantik Partikel Euy dalam Novel Budak Teuneung Karya Samseodi." Metahumaniora 9, no. 1 (July 30, 2019): 1. http://dx.doi.org/10.24198/mh.v9i1.22875.

Full text
Abstract:
Partikel euy merupakan salah satu partikel fatis dalam bahasa Sunda. Partikel ini, sebagaimana partikel fatis lain, tidak memiliki fungsi sintaksis dalam kalimat, yakni sebagai unsur ekstraposisi dalam kalimat. Tulisan ini yang berjudul “Dimensi Sintaksis dan Semantik Partikel Euy dalam Novel Budak Teuneung”membahas perilaku sintaksis partikel euy, yaitu keberadaannnya dalam jenis kalimat berdasarkan bentuk sintaksisnya, dan makna gramatikal partikel euy dalam lingkungan kalimat deklaratif, interogatif, imperatif, dan eksklamatif. Metode penelitian ini bersifat deskriptif kualitatif. Data dikumpulkan dengan menggunakan metode simak dengan teknk catat. Selanjutnya, data dianalisis menggunakan metode agih atau distribusional. Sumber data yang digunakan adalah novel anak-anak yang berjudul Budak Teuneung (2018) karya Samsoedi. Berdasarkan hasil penelitian, ditemukan 46 data kalimat yang memuat partikel euy. Berdasarkan analisis terhadap 46 data tersebut dengan pendekatan sintaksis dan semantik, dapat disimpulkan bahwa partikel euy dapat berposisi di awal, di tengah, atau di akhir kalimat deklaratif, tetapi dominan berposisi di tengah kailimat. Partikel euy hanya berposisi di tengah dan di akhir kalimat interogatif, tidak ada yang berposisi di awal kalimat. Partikel euy dapat berposisi di awal, di tengah, dan di akhir kalimat imperatif, tetapi dominan berposisi di akhir kalimat. Partikel euy hanya berposisi di awal dan di akhir kalimat eksklamatif, tidak ada yang berposisi di tengah kalimat. Secara semantik, partikel euy bersama jenis kalimat yang memuatnya memiliki keragaman makna gramatikal. Secara umum dapat dikatakan partikel euy beserta unsur lingusitik yang mendampinginya dalam kalimat deklaratif memiliki makna ‘meberitahukan atau menyatakan sesuatu’; dalam kalimat interogatif, memiliki makna ‘meminta sesuatu’; dalam kalimat imperatif, memiliki makna ‘meminta sesuatu’ atau ‘memerintahkan sesuatu’; dalam kalimat eksklamataif. memiliki makna ‘mengungkapkan atau menyampaikan sesuatu’.Particle euy is just one-structured particles in the Sundanese language. This particle, as another particles phatic, does not have the syntactic function in the sentence, namely as an element in extraposition sentence. This article entitled "Dimensions of Syntax and Semantics of the Euy Particle in Novel of Budak Teuneung" discuses the behavior of particles in syntax dimension, namely it’s distribution in the type of sentence based on syntactic and grammatical meaning of particles in the environment, namely in declarative sentences, interrogative, imperative, and exclamative ones. This research method is descriptive qualitative. Data collected by using observation techniques to record. Furthermore, the data were analyzed using distributional method. Source data used is a children's novel titled Budak Teuneung (2018) written by Samsoedi. Based on the results of the study, found that 46 data sentence contains particles here. Based on an analysis of 46 data with the approach of syntax and semantics, it can be concluded that the particle euy can be positioned at the beginning, in the middle, or at the end of a declarative sentence, but a dominant position in the middle; particle euy simply positioned in the middle and at the end of interrogative sentences, no position early in the sentence; particle euy can be positioned at the beginning, in the middle, and at the end of the imperative sentence, but a dominant position in the end of the sentence; particle euy only just plays in the beginning and at the end of the exclamative sentence, no position in the middle of a sentence. Semantically, particle euy with the kind of sentences contain a variety of grammatical meaning. Generally speaking, the particle with linguistic elements that accompany the declarative sentences have meaning 'report missing or declared something'; interrogative sentences have meaning 'ask anything'; imperative sentences have meaning 'ask anything' or 'ordered something'; exclamative sentences have meaning 'reveal or convey something'.
APA, Harvard, Vancouver, ISO, and other styles
5

Nurhaida, Nurhaida, Nova Fatma Wati, and Dina Setyawati. "SIFAT FISIK MEKANIK PAPAN PARTIKEL DARI SERAT KULIT BATANG SAGU (Metroxylon spp) BERDASARKAN RASIO ASAM SITRAT-SUKROSA." JURNAL HUTAN LESTARI 10, no. 1 (June 19, 2022): 195. http://dx.doi.org/10.26418/jhl.v10i1.53140.

Full text
Abstract:
This particle board is made of sago stem bark fibers, which are processing wastes using sucrose citric acid without formaldehyde emission. The purpose of the study was to test the physical and mechanical properties of sago stem bark fiber particleboard based on citric acid and sucrose ratios to obtain optimal particle board physical and mechanical properties. Particle boards are made using sago stem bark fibers with a length of 10 cm and use citric-sucrose acid ratio (0/100, 25/75, 50/50, 75/25, 100/0), particle boards are made with a size of 30 cm x 30 cm x 1 cm with a target density of 0.8 gr/cm3. The particle board is pumped hot at 160ºC for 20 minutes with a pressure of 25 kg/cm². Particle board testing refers to the JIS A 5908-2003 type 8 standard. The results showed that the optimal particle board made with citric acid:sucrose ratio (25:75) with a moisture content of 7.98%, thickness swelling 48.87%, water absorption 105.78%, MOE 20,011.34 kg/cm², MOR 214.41 kg/cm², internal bonding strength 1.33 kg/cm² and firmness of screw grip 74.1982 kgKeywords: citric acid, sucrose, particle board, sago stem bark fibers, mechanical physiqueAbstrakPapan partikel ini terbuat dari serat kulit batang sagu yang merupakan limbah hasil pengolahan sagu dengan menggunakan perekat asam sitrat sukrosa tanpa emisi formaldehida. Tujuan dari penelitian ini adalah untuk menguji sifat fisik dan mekanik papan partikel serat kulit batang sagu berdasarkan rasio asam sitrat dan sukrosa dan untuk mendapatkan sifat fisik dan mekanik papan partikel yang optimal. Papan partikel dibuat menggunakan serat kulit batang sagu dengan panjang 10 cm dan menggunakan rasio asam sitrat-sukrosa (0/100, 25/75, 50/50, 75/25, 100/0), papan partikel dibuat dengan ukuran 30 cm x 30 cm x 1 cm dengan target kerapatan 0,8 gr/cm3. Papan partikel dikempa panas pada suhu 160 oC selama 20 menit dengan tekanan 25 kg/cm2. Pengujian papan partikel mengacu pada standar JIS A 5908-2003 Type 8. Hasil penelitian menunjukan bahwa papan partikel optimal yang dibuat dengan rasio asam sitrat: sukrosa (25:75) dengan kadar air 7,98%, pengembangan tebal 48,87%, daya serap air 105,78%, MOE 20.011,34 kg/cm², MOR 214,41 kg/cm², internal bonding 1,33 kg/cm² dan kuat pegang sekrup 74,1982 kg Kata kunci: asam sitrat, sukrosa, papan partikel, serat kulit batang sagu, fisik mekanik
APA, Harvard, Vancouver, ISO, and other styles
6

Husairy, A., and Benny D. Leonanda. "SIMULASI PENGARUH VARIASI KECEPATAN INLET TERHADAP PERSENTASE PEMISAHAN PARTIKEL PADA CYCLONE SEPARATOR DENGAN MENGGUNAKAN CFD." Jurnal Rekayasa Sipil (JRS-Unand) 10, no. 1 (February 15, 2014): 12. http://dx.doi.org/10.25077/jrs.10.1.12-21.2014.

Full text
Abstract:
Pada tulisan ini akan dibahas pengaruh kecepatan dan dimensi terhadap persentase pemisahan partikel cyclone separator dengan menggunakan CFD. Persamaan yang digunakan dalam CFD adalah persamaan kepsilon RNG. Variasi kecepatan 7, 10, 15, 20, dan 30m/s dilakukan untuk mengetahui pengaruhnya terhadap persentase pemisahan partikel. Variasi lebar inlet 0,2 dan 0.25m serta diameter outlet 0.4 dan 0.5m juga dilakukan untuk mengetahui pengaruhnya terhadap cyclone separator. Persentase pemisahan partikel didapat dengan simulasi Particle Track. Dimana pada penelitian didapat jumlah partikel yang Escaped ataupun Trapped. Escaped adalah jumlah partikel yang ikut keluar bersama udara bersih, sedangkan Trapped adalah partikel yang telah disisihkan dari udara bersih dan masuk kedalam chopper. Pada simulasi ini juga didapat kontur tekanan dan kecepatan dari cyclone separator tersebut. Dari hasil simulasi didapatkan bahwa variasi kecepatan cukup berpengaruh terhadap persentase pemisahan partikel, dimana semakin tinggi kecepatan inlet maka persentase partikel yang escaped semakin sedikit dan yang trapped semakin bertambah. Dari 4 tipe cyclone separator yang disimulasikan, cyclone separator dengan diameter outlet 0.4m dan lebar inlet 0.25m menghasilkan persentase pemisahan yang paling tinggi, untuk kecepatan 20m/s , hanya 4.54% partikel yang keluar bersama udara bersih. Tapi cyclone separator ini menghasilkan tekanan yang lebih tinggi dibandingkan cyclone separator tipe lainnya. Keywords: cyclone separator, kecepatan, tekanan, persentase pemisahan partikel
APA, Harvard, Vancouver, ISO, and other styles
7

Hatta, Zia Nurkhalida, Mursal Mursal, and Ismail Ismail. "Mechanical properties of coconut shell particle board using epoxy resin adhesive." Journal of Aceh Physics Society 10, no. 2 (April 14, 2021): 36–40. http://dx.doi.org/10.24815/jacps.v10i2.19086.

Full text
Abstract:
Abstrak. Papan partikel merupakan komposit yang tersusun dari filler (penguat) dan matriks (pengikat). Papan partikel dapat dibuat dari bahan limbah pertanian yang mengandung selulosa seperti tempurung kelapa. Penelitian ini menggunakan limbah tempurung kelapa sebagai filler dan resin epoksi (RE) sebagai matriks. Penelitian dilakukan dengan memvariasikan ukuran partikel tempurung kelapa (60, 80, 100 dan 120 mesh) dan komposisi filler tempurung kelapa:perekat RE (70:30, 75:25, 80:20, dan 85:15 vol.%) untuk memperoleh sifat mekanik yang terbaik. Sifat mekanik yang diuji adalah modulus of elasticity, modulus of rupture, dan kuat tekan. Sifat mekanik papan partikel diuji sesuai standar ASTM. Hasil penelitian menunjukkan bahwa sifat mekanik menurun dengan bertambahnya komposisi tempurung kelapa. Namun sifat mekanik meningkat dengan mengecilnya ukuran partikel dari 60 ke 120 mesh. Papan partikel yang dihasilkan memenuhi persyaratan ANSI untuk ukuran partikel 120 mesh, komposisi tempurung kelapa 80 vol.%, dan RE 20 vol.%.Abstract. Particle board is a composite composed of filler (reinforcement) and a matrix (binder). Particle board can be made of agricultural waste material containing cellulose such as a coconut shell. This study used coconut shell particles as a filler and epoxy resin (RE) as a matrix. The research was conducted by varying the particle size of coconut shells (60, 80, 100 and 120 mesh) and the composition of coconut shell fillers:RE adhesive (70:30, 75:25, 80:20, and 85:15 vol.%) to obtain the best mechanical properties. The mechanical properties tested were modulus of elasticity, modulus of rupture, and compressive strength. Particleboard was tested according to ASTM standards. The results showed that the mechanical properties decreased with increasing coconut shell composition. However, the mechanical properties increased as the particle size decreased from 60 to 120 mesh. The resulting particle board meets ANSI requirements for a particle size of 120 mesh, 80 vol.% of coconut shell composition, and 20 vol.% of RE. Keywords: Coconut Shell, Epoxy Resin, Mechanical Properties, Particle Board
APA, Harvard, Vancouver, ISO, and other styles
8

Suoth, Verna Albert, and Maria D. Bobanto. "PENGUKURAN KONSENTRASI PARTIKEL ASAP ROKOK DENGAN MENGGUNAKAN P-TRAK." JURNAL ILMIAH SAINS 16, no. 2 (November 9, 2016): 80. http://dx.doi.org/10.35799/jis.16.2.2016.14109.

Full text
Abstract:
ABSTRAK Penelitian ini bertujuan untuk menentukan konsentrasi partikel pada asap rokok pada beberapa sampel rokok yang menggunakan filter dan sampel rokok tersebut merupakan rokok yang beredar di Indonesia. Ada 4 sampel rokok berfilter yang digunakan yakni filter x, filter B, filter DE, dan filter DF. Jumlah konsentrasi partikel asap rokok diukur dengan menggunakan P-Track. Hasil penelitian yang di dapat bervariasi bergantung dari karakteristik filter yang ada pada masing-masing rokok tersebut. Konsentrasi partikel asap rokok yang terukur dengan menggunakan beberapa filter didapatkan bahwa dengan menggunakan Filter B akan mendapatkan konsentrasi partikel paling tinggi yaitu 384.100 pt/cc sedangkan Filter DE konsentrasi partikel 234.000 pt/cc untuk Filter DF konsentrasi partikel 204.400 pt/cc dan Filter X konsentrasi partikel 43.320 pt/cc. Faktor emisi partikel asap rokok yang dikeluarkan oleh batang rokok filter B lebih besar dibanding dengan filter lain oleh karena pada masing-masing filter memiliki karakteristik yang berbeda sehingga asap yang dikeluarkan akan sangat berbeda. Dari data tersebut dapat diketahui tingkat bahaya partikel asap rokok sebanding dengan banyaknya asap rokok yang masuk ke detector. Kata kunci: P-Trak, konsentrasi Partikel, asap rokok SMOKE PARTICLE CONCENTRATION MEASURING USING P-TRAK ABSTRACT This research aims to determine the concentration of particles in cigarette smoke in some samples of cigarettes and cigarette samples using the filter is a cigarette that circulated in Indonesia. There are 4 samples of filtered cigarettes used the filter x, filter B, filter DE, and DF filter. The amount of smoke particle concentrations were measured by using the P-Track. Results of research on may vary depending on the characteristics of the existing filter on each of these cigarettes. The concentration of particles of cigarette smoke measured by using multiple filters found that by using Filter B will get a concentration of particles highest of 384.100 pt/cc while Filter DE particle concentration of 234.000 pt/cc to filter DF particle concentration 204.400 pt/cc and Filter X concentration of particles 43.320 pt/cc. Cigarette smoke particles emission factors released by cigarette filter rod B is greater than the other filters because at each filter has different characteristics so that the smoke released will be very different. From these data it can be seen the danger level of cigarette smoke particles is proportional to the number of cigarette smoke coming into the detector. Keywords: P-Trak, the concentration of particles, cigarette smoke
APA, Harvard, Vancouver, ISO, and other styles
9

Horst, David, Qian Zhang, and Eberhard Schmidt. "Deliqueszenz und Effloreszenz hygroskopischer Salzpartikeln in Partikel-Wand- und Partikel-Partikel-Kontakten." Chemie Ingenieur Technik 91, no. 1-2 (December 3, 2018): 46–54. http://dx.doi.org/10.1002/cite.201800063.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Imban, Rizky Kurniawan, As'ari ., and Seni Herlina J. Tongkukut. "Pengukuran Koefisien Absorbsi Bunyi pada Serbuk Gergaji Kayu Nyatoh (Palaquium species) sebagai Bahan Peredam." Jurnal MIPA 3, no. 1 (March 2, 2014): 16. http://dx.doi.org/10.35799/jm.3.1.2014.3900.

Full text
Abstract:
Telah dilakukan penelitian untuk memperoleh nilai koefisien absorbsi bunyi pada papan partikel dari bahan campuran serbuk gergajian kayu nyatoh dan tepung kanji dengan variasi ukuran butir. Papan partikel dibuat dengan komposisi 50 g serbuk gergaji dan 50 g tepung kanji. Papan partikel dibuat dengan rapat massa (ρ) = 0,62 x 103 kg.m-3. Koefisien absorbsi bunyi diukur dengan menggunakan sound level meter, intensitas bunyi yang diukur antara lain intensitas bunyi yang datang, intensitas yang dipantulkan dan intensitas yang ditransmisikan. Intensitas absorbsi didapat dengan mengurangkan intensitas awal ( ) dengan intensitas transmisi ( ) dan intensitas refleksi ( ). Data yang diperoleh dibuat grafik dan dianalisis. Diperoleh hasil bahwa papan partikel yang terbuat dari campuran serbuk gergajian kayu nyatoh dan tepung kanji dengan komposisi 1:1 (sampel 3) adalah papan partikel terbaik sebagai bahan absorbsi bunyi pada penelitian ini. Papan partikel mempunyai sifat fisis: koefisien absorbsi 0,15 cm-1, intensitas refleksi 1,5 dB, intensitas absorbsi 29,45 dB dan efisiensi absorbsi 29,42 %.Research has been conducted to obtain the sound absorbtion coefficient of the particle board from the mixture of the sawdust of Nyatoh and the starch with the variation of the grain size. Particle board is made with the composition of 50 g sawdust and 50 g starch. Particle board is made with the mass density (ρ) = 0.62 x 103 kg.m-3. Sound absorbtion coefficient is measured using a sound level meter, sound intensity is measured such as the intensity of incident sound, the intensity of reflected sound and the intensity of transmitted sound. The intensity of absorbtion is obtained by reducing the initial intensity (I0) with the transmission intensity (IT) and the reflection intensity (IR). The obtained data were graphed and analyzed. The results indicated that the particle board that is made from the mixture of the sawdust of Nyatoh and the starch with the composition 1:1 (sample 3) is the best particle board as sound absorbtion material in this research. The particle board has physical properties: the absorbtion coefficient 0.15 cm-1, the reflection intensity 1.5 dB, the absorbtion intensity 29.45 dB, and the absorbtion efficiency 29.42%. t-f�5y � p ew Roman";mso-ansi-language:SV;mso-fareast-language:EN-US;mso-bidi-language: AR-SA'>Papan partikel dibuat dengan komposisi 50 g serbuk gergaji dan 50 g tepung kanji. Papan partikel dibuat dengan rapat massa (ρ) = 0,62 x 103 kg.m-3. Koefisien absorbsi bunyi diukur dengan menggunakan sound level meter, intensitas bunyi yang diukur antara lain intensitas bunyi yang datang, intensitas yang dipantulkan dan intensitas yang ditransmisikan. Intensitas absorbsi didapat dengan mengurangkan intensitas awal ( ) dengan intensitas transmisi ( ) dan intensitas refleksi ( ). Data yang diperoleh dibuat grafik dan dianalisis. Diperoleh hasil bahwa papan partikel yang terbuat dari campuran serbuk gergajian kayu nyatoh dan tepung kanji dengan komposisi 1:1 (sampel 3) adalah papan partikel terbaik sebagai bahan absorbsi bunyi pada penelitian ini. Papan partikel mempunyai sifat fisis: koefisien absorbsi 0,15 cm-1, intensitas refleksi 1,5 dB, intensitas absorbsi 29,45 dB dan efisiensi absorbsi 29,42 %.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Partikel"

1

Wassen, Erik. "Entwicklung paralleler Algorithmen zur numerischen Simulation von Gas-Partikel-Strömungen unter Berücksichtigung von Partikel-Partikel-Kollisionen." [S.l. : s.n.], 1998. http://deposit.ddb.de/cgi-bin/dokserv?idn=956133320.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Wassen, Erik. "Entwicklung paralleler Algorithmen zur numerischen Simulation von Gas-Partikel-Stroemungen unter Beruecksichtigung von Partikel-Partikel-Kollisionen." Doctoral thesis, Universitätsbibliothek Chemnitz, 1998. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-199801549.

Full text
Abstract:
Gas-Partikel-Stroemungen finden sich in weiten Bereichen der Energie- und Verfahrenstechnik. Beispiele fuer haeu- fig anzutreffende Problemstellungen sind der Transport, die Separation oder die Injektion eines Gemisches aus festen Partikeln und einem Traegergas. Fuer die numerische Simulation solcher disperser Mehr- phasenstroemungen hat sich das Lagrange-Verfahren als besonders geeignet erwiesen. Andererseits stellt die An- wendung dieses Berechnungsverfahrens hoechste Anforderun- gen an die Ressourcen der verwendeten Rechner. Dies gilt im besonderen Masse fuer die Simulation von Stroemungen mit einer moderaten bis hohen Partikelbeladung, in denen die Partikel-Partikel-Kollisionen einen grossen Einfluss auf das Stroemungsverhalten haben. Um das grosse Leistungspotential, das heutige massiv par- allele Hochleistungsrechner bieten, effizient zu nutzen, wurden im Rahmen dieser Arbeit parallele Simulationsalgo- rithmen fuer die numerische Berechnung kollisionsbehafte- ter Gas-Partikel-Stroemungen entwickelt. Die Effizienz dieser Algorithmen wurde anhand verschiedener Testfaelle untersucht. Auf der Grundlage der dabei erzielten Ergeb- nisse wurden Vorschlaege fuer weitere Entwicklungsmoeg- lichkeiten erarbeitet
Gas-particle-flows can be found widely in the field of energy production and process engineering. Examples for applications of such kind of flows are transport, se- paration or injection of a mixture of solid particles and a gaseous phase. The Lagrangian approach has proved to be a suitable means for the numerical simulation of disperse multiphase flows. On the other hand its application requires a large amount of computational power, especially when flows with a mo- derate or high particle loading are computed and particle- particle collisions have a significant influence on the flow. In order to use efficiently the large computational power that parallel computers provide nowadays, parallel algo- rithms for the numerical simulation of gas-particle flows including particle-particle collisions were developed in the cource of this work. The algorithms' efficiency was investigated considering different test cases. On the basis of the results suggestions for further developments were made
APA, Harvard, Vancouver, ISO, and other styles
3

Kirchhof, Martin. "Sinterkinetik nanoskaliger Partikel /." München : Hut, 2009. http://bvbr.bib-bvb.de:8991/F?func=service&doc_library=BVB01&doc_number=017592668&line_number=0001&func_code=DB_RECORDS&service_type=MEDIA.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Koch, Thea, and Peter Spieth. "Gesundheitsrisiken inhalierter Partikel." Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2007. http://nbn-resolving.de/urn:nbn:de:swb:14-1188903874802-07309.

Full text
Abstract:
Although not all hazardous effects on human health have been clearly defined so far, the health risks of particulate matter can be considered evident. Pulmonary and cardiovascular diseases, in particular, are caused or aggravated by inhaled particulate matter. The aim of this article is to describe the incorporation and the effects on organ function of inhaled particles. Furthermore, the potential risks of de novo synthesised nanoparticles are discussed in the context of the public controversy regarding environmental particulate matter pollution
Obwohl die schädlichen Auswirkungen inhalierbarer Partikel auf unseren Organismus bisher noch nicht vollständig geklärt sind, kann eine Gesundheitsgefährdung durch Feinstäube als erwiesen angesehen werden. Insbesondere pulmonale und kardiovaskuläre Erkrankungen werden durch Feinstaubexposition ausgelöst oder verschlimmert. Dieser Artikel stellt Aufnahme und Auswirkungen inhalierter Partikel im menschlichen Organismus dar und erörtert potenzielle Gefahren de novo synthetisierter Nanopartikel im Kontext der auch in der breiten Öffentlichkeit kontrovers geführten Feinstaubdiskussion
APA, Harvard, Vancouver, ISO, and other styles
5

Ytterberg, Adam. "Partikel hela vägen." Thesis, Konstfack, Institutionen för Konst (K), 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:konstfack:diva-6074.

Full text
Abstract:
i Uppsatsen försöker jag beskriva min senaste tid inom konstinstitutionen där jag brottats med vad det är jag vill påstå att min konst handlar om. jag demonstrerar med sakligt argumenterande och med en poetisk ton mitt sökande efter nyanser på min palett av skapelseprocesser för att komma närmare helhetsbilder.
APA, Harvard, Vancouver, ISO, and other styles
6

Kirchhof, Martin. "Sinterkinetik nanoskaliger Partikel." München Verl. Dr. Hut, 2008. http://d-nb.info/994105576/04.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Renner, Barbara [Verfasser]. "Rotation suspendierter axialsymmetrischer Partikel unter Berücksichtigung der Partikel-Medium-Wechselwirkung / Barbara Renner." Magdeburg : Universitätsbibliothek, 2018. http://d-nb.info/1162952881/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Stubenrauch, Kay-Gunnar. "Virusanaloge Partikel als zelltypspezifisches Vektorsystem." [S.l. : s.n.], 2000. http://deposit.ddb.de/cgi-bin/dokserv?idn=961406755.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Sandvoß, Stefanie [Verfasser]. "Oberflächenmodifizierung magnetischer Partikel / Stefanie Sandvoß." Hannover : Technische Informationsbibliothek und Universitätsbibliothek Hannover (TIB), 2011. http://d-nb.info/1013471369/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Werth, Jochen Heinrich. "Simulation elektrisch geladener Partikel in Suspensionen." [S.l.] : [s.n.], 2007. http://deposit.ddb.de/cgi-bin/dokserv?idn=985081392.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Partikel"

1

Klaas-Hinrich, Ehlers, ed. Partikel-Bibliographie: Internationale Sprachenforschung zu Partikeln und Interjektionen. Frankfurt am Main: P. Lang, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Biederer, Sven. Magnet-Partikel-Spektrometer. Wiesbaden: Vieweg+Teubner Verlag, 2012. http://dx.doi.org/10.1007/978-3-8348-2407-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Gräser, Matthias. Mehrdimensionale Magnet-Partikel-Spektroskopie und -Bildgebung. Wiesbaden: Springer Fachmedien Wiesbaden, 2017. http://dx.doi.org/10.1007/978-3-658-17645-7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Partikel, Alfred, 1888-1945 or 6., Roese Guenter, and Kunstkaten Ahrenshoop, eds. Alfred Partikel: Die "gebrochene Fiktion der Idylle". [Ahrenshoop]: Stiftung Kunstmuseum Ahrenshoop, Kunstkaten Ahrenshoop, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Ullmann, Manfred. Die arabische Partikel ḥāšā: Syntax und Semantik. München: Bayerische Akademie der Wissenschaften, 2014.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Schleburg, Florian. Altenglisch swa: Syntax und Semantik einer polyfunktionalen Partikel. Heidelberg: C. Winter, 2002.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Produkteigenschaften ultrafeiner Partikel: Mikromechanik, Fliess- und Kompressionsverhalten kohäsiver Pulver. Leipzig: Sächsische Akademie der Wissenschaften zu Leipzig, 2009.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Partikel, Alfred, 1888-1945 or 1946 and Kunstmuseum Ahrenshoop, eds. Gerhard Marcks und Alfred Partikel: Eine Künstlerfreundschaft in Ahrenshoop. Ostseebad Ahrenshoop: Kunstmuseum Ahrenshoop, 2019.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Wahyudi, Agus. Penyiapan nano partikel silika dari mineral silikat secara mekanis. Bandung: Puslitbang Teknologi Mineral dan Batubara, Badan Litbang Energi dan Sumber Daya Mineral, Kementerian Energi dan Sumber Daya Mineral, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Oder, Stephanie. Produktion und Charakterisierung biogener anorganischer, nanoskaliger und nanostrukturierter Partikel. Karlsruhe: Univ.-Verl. Karlsruhe, 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Partikel"

1

Bährle-Rapp, Marina. "Partikel." In Springer Lexikon Kosmetik und Körperpflege, 403. Berlin, Heidelberg: Springer Berlin Heidelberg, 2007. http://dx.doi.org/10.1007/978-3-540-71095-0_7456.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Starmann, David. "Partikel." In Grundkurs Mediengestaltung, 247–308. Wiesbaden: Vieweg+Teubner Verlag, 2004. http://dx.doi.org/10.1007/978-3-322-83100-2_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Richartz, Jonas. "Partikel." In Spiele entwickeln mit Unreal Engine 4, 219–32. München: Carl Hanser Verlag GmbH & Co. KG, 2016. http://dx.doi.org/10.3139/9783446448063.012.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Richartz, Jonas. "Partikel." In Spiele entwickeln mit Unreal Engine 4, 223–36. München: Carl Hanser Verlag GmbH & Co. KG, 2017. http://dx.doi.org/10.3139/9783446453692.012.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Ehling, A., B. Gierten, and T. Arndt. "Dane-Partikel." In Springer Reference Medizin, 655. Berlin, Heidelberg: Springer Berlin Heidelberg, 2019. http://dx.doi.org/10.1007/978-3-662-48986-4_824.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Ehling, A., B. Gierten, and T. Arndt. "Dane-Partikel." In Lexikon der Medizinischen Laboratoriumsdiagnostik, 1. Berlin, Heidelberg: Springer Berlin Heidelberg, 2018. http://dx.doi.org/10.1007/978-3-662-49054-9_824-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Schmidt-Ott, Andreas. "Partikel-Messtechnik." In Sensortechnik, 1005–62. Berlin, Heidelberg: Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-642-29942-1_16.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Sturm, Adolf, and Rudolf Förster. "Partikel- und Betriebsmediendiagnostik." In Maschinen- und Anlagendiagnostik, 298–315. Wiesbaden: Vieweg+Teubner Verlag, 1990. http://dx.doi.org/10.1007/978-3-322-99814-9_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Biederer, Sven. "Einleitung." In Magnet-Partikel-Spektrometer, 1–6. Wiesbaden: Vieweg+Teubner Verlag, 2012. http://dx.doi.org/10.1007/978-3-8348-2407-3_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Biederer, Sven. "Magnetic-Particle-Imaging." In Magnet-Partikel-Spektrometer, 7–38. Wiesbaden: Vieweg+Teubner Verlag, 2012. http://dx.doi.org/10.1007/978-3-8348-2407-3_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Partikel"

1

Novitasari, Novitasari. "PROFIL KEMAMPUAN MEMAHAMI MATERI DINAMIKA PARTIKEL PADA SISWA SMA KELAS X." In SEMINAR NASIONAL FISIKA 2016 UNJ. Pendidikan Fisika dan Fisika FMIPA UNJ, 2016. http://dx.doi.org/10.21009/0305010407.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Ludwig, J., A. Posa, A. Gross, M. Forsting, T. Albrecht, R. Iezzi, and J. Theysohn. "Europäische Multicenter-Studie über abbaubare Stärke-Partikel TACE: die bekömmliche HCC Behandlung." In 101. Deutscher Röntgenkongress und 9. Gemeinsamer Kongress der DRG und ÖRG. © Georg Thieme Verlag KG, 2020. http://dx.doi.org/10.1055/s-0040-1703212.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Weber, K., S. Pahlow, D. Cialla-May, and J. Popp. "4.6 - Partikel- und chipbasierte Anreicherung von Bakterien für einen Point-of-Care-Nachweis." In 13. Dresdner Sensor-Symposium 2017. AMA Service GmbH, Von-Münchhausen-Str. 49, 31515 Wunstorf, Germany, 2017. http://dx.doi.org/10.5162/13dss2017/4.6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Fitriyani, Shinta, Erina Hertanti, and Ai Nurlaela. "PENGARUH METODE DRILL BERBANTUAN SOAL ANIMASI TERHADAP KEMAMPUAN BERPIKIR REFLEKTIF SISWA PADA KONSEP DINAMIKA PARTIKEL." In SEMINAR NASIONAL FISIKA 2017 UNJ. Pendidikan Fisika dan Fisika FMIPA UNJ, 2017. http://dx.doi.org/10.21009/03.snf2017.01.eer.01.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Taer, E., S. Nurjanah, Sugianto Sugianto, and R. Taslim. "PEMBUATAN DAN KARAKTERISASI SIFAT FISIS ELEKTRODA KARBON DARI BUNGA RUMPUT GAJAH DITINJAU DARI PERBEDAAN UKURAN PARTIKEL." In SEMINAR NASIONAL FISIKA 2016 UNJ. Pendidikan Fisika dan Fisika FMIPA UNJ, 2016. http://dx.doi.org/10.21009/0305020207.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Tirkaz, Caglar, Berrin Yanikoglu, and T. Metin Sezgin. "Using particle filters for partial sketch matching." In 2011 IEEE 19th Signal Processing and Communications Applications Conference (SIU). IEEE, 2011. http://dx.doi.org/10.1109/siu.2011.5929740.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Francomano, Elisa, Adele Tortorici, Elena Toscano, Guido Ala, Theodore E. Simos, George Psihoyios, and Ch Tsitouras. "Multiscale Particle Method in Solving Partial Differential Equations." In Numerical Analysis and Applied Mathematics. AIP, 2007. http://dx.doi.org/10.1063/1.2790115.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Nir, Guy, and Allen Tannenbaum. "Temporal registration of partial data using particle filtering." In 2011 18th IEEE International Conference on Image Processing (ICIP 2011). IEEE, 2011. http://dx.doi.org/10.1109/icip.2011.6116064.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Yu, Jinxia, Wenjing Liu, and Yongli Tang. "Improved particle filter algorithms based on partial systematic resampling." In 2010 IEEE International Conference on Intelligent Computing and Intelligent Systems (ICIS 2010). IEEE, 2010. http://dx.doi.org/10.1109/icicisys.2010.5658594.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Putman, Edward, Graham Hargrave, and Neil Halliwell. "Partial Image Error (PIE) in Digital Particle Image Velocimetry (DPIV)." In 26th AIAA Aerodynamic Measurement Technology and Ground Testing Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 2008. http://dx.doi.org/10.2514/6.2008-3711.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Partikel"

1

Ley, M., Zane Lloyd, Shinhyu Kang, and Dan Cook. Concrete Pavement Mixtures with High Supplementary Cementitious Materials Content: Volume 3. Illinois Center for Transportation, September 2021. http://dx.doi.org/10.36501/0197-9191/21-032.

Full text
Abstract:
Fly ash is a by-product of coal combustion, made up of particles that are collected through various methods. This by-product has been used successfully as a partial Portland cement replacement in concrete, but the performance predictions of fly ash in concrete have been difficult to predict, especially at high fly ash replacement rates. This study focuses on comparing the performance of concrete with a variety of fly ash mixtures as well as the particle distribution and chemical makeup of fly ash. The slump, unit weight, compressive strength, and isothermal calorimetry tests were used to measure the performance of concrete at 0%, 20%, and 40% fly ash replacement levels. The particle distribution of fly ash was measured with an automated scanning electron microscope. Additionally, the major and minor oxides from the chemical makeup of fly ash were measured for each mixture and inputted into a table. The particle distribution and chemical makeup of fly ash were compared to the performance of slump, unit weight, compressive strength, isothermal calorimetry, and surface electrical resistivity.
APA, Harvard, Vancouver, ISO, and other styles
2

Mogler, Mark, D. L. Hank Harris, Matthew M. Erdman, and Kurt I. Kamrud. Replicon Particle Porcine Reproductive and Respiratory Syndrome Virus Vaccine Provides Partial Protection from Challenge. Ames (Iowa): Iowa State University, January 2009. http://dx.doi.org/10.31274/ans_air-180814-23.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Green, D. Particle physics. Office of Scientific and Technical Information (OSTI), May 1994. http://dx.doi.org/10.2172/10156370.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Nefkens, B. M. K. Particle physics. Office of Scientific and Technical Information (OSTI), October 1991. http://dx.doi.org/10.2172/6137538.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Vaillancourt, François, and Michel Magnan. Le partage du financement des services de l’agglomération de Montréal en 2020: État des lieux, analyse et éléments de comparaison. CIRANO, August 2022. http://dx.doi.org/10.54932/cvub5177.

Full text
Abstract:
Ce texte se divise en quatre parties. La première présente l’agglomération de Montréal, ses dépenses et ses mécanismes de financement. L’agglomération crée en 2006 couvre le territoire administratif de l’île de Montréal. Ce territoire englobe la Ville de Montréal (qui regroupe 88% de la population) et 15 municipalités de banlieue. En 2020, les principales dépenses de l’agglomération comprennent les services policiers (28%), le transport en commun (25%), le service d’incendie (16%) et le service d’eau (10%). Son financement se fait par quotes-parts. Ces dernières reflètent à plus de 90 % la répartition de la richesse foncière entre les municipalités membres. Les municipalités de banlieue s’exprimant par leur association jugent leur contribution au financement des dépenses d’agglomération trop élevée. La deuxième partie du rapport présente les grands principes pouvant être utilisés pour choisir le mode de financement des services publics. On y examine comment les services de l’agglomération génèrent plus ou moins d’externalités et correspondent plus ou moins à la notion de bien collectif. La troisième partie présente des exemples de formule de partage des coûts entre municipalités pour cinq services publics : police, incendie, transport en commun, matières résiduelles et eau. La dernière partie indique que l’insatisfaction des banlieues ne s’explique pas par une détérioration de leur situation à travers le temps. L’utilisation de la population dans le calcul des quotes-parts ne constitue pas une pratique plus équitable que les valeurs foncières, mais peut représenter un compromis advenant un nouveau partage de la charge fiscale entre les municipalités.
APA, Harvard, Vancouver, ISO, and other styles
6

Galic, H., F. Lehar, and P. R. Kettle. Current experiments in particle physics - particle data group. Office of Scientific and Technical Information (OSTI), September 1996. http://dx.doi.org/10.2172/469140.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Ali, Usman, Mamoru Kikumoto, Matteo Ciantia, and Ying Cui. Direct observation of particle kinematics in biaxial shearing test. University of Dundee, December 2021. http://dx.doi.org/10.20933/100001233.

Full text
Abstract:
Biaxial shearing tests on dual-sized, 2d particle assemblies are conducted at several confining pressures. The effect of particle angularity, an important mesoscale shape descriptor, is investigated at the macro and micro levels. Macroscopically, it is observed that assemblies composed of angular particles exhibit higher strengths and dilations. The difference observed in bulk behavior due to particle angularity can be explained reasonably by considering particle-level mechanisms. A novel 2D image analysis technique is employed to estimate particle kinematics. Particle rotation results to be a key mechanism strongly influenced by particle shape determining the overall granular behavior. Unlike circular particles, angular ones are more resistant to rotations due to stronger interlocking and consequently exhibit higher strengths.
APA, Harvard, Vancouver, ISO, and other styles
8

Ottburg, F. G. W. A., N. H. C. van Adrichem, H. J. G. A. Limpens, and M. J. Schillemans. EUROBATS : Analyse van de resoluties die zijn aangenomen tijdens de vergadering van de partijen (Meeting of the Parties) in 2014. Wageningen: Alterra, Wageningen-UR, 2016. http://dx.doi.org/10.18174/384592.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Alex J. Dragt. Final Technical Report for the Grant DF-FG02-03ER41236 Partial Support of CPO6, The Sixth International Charged-Particle Optics Conference. Office of Scientific and Technical Information (OSTI), June 2004. http://dx.doi.org/10.2172/824990.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Manski, Charles. Partial Prescriptions For Decisions With Partial Knowledge. Cambridge, MA: National Bureau of Economic Research, October 2008. http://dx.doi.org/10.3386/w14396.

Full text
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography