Dissertations / Theses on the topic 'Particle Picking'

Induced seismicity is a common phenomenon that occurs as soon as the stress state in the subsurface is externally altered in a way that faults are destabilized. It is especially problematic in stable tectonic regions where the area is not used to earthquakes; the infrastructure is not built to withstand ground movement and thus when the induced seismicity occurs damage can follow. In this thesis, mining-induced seismicity has been studied at the Dannemora mine, located in central Sweden, with the aim to locate the seismicity and gain understanding of its occurrence and behavior. The mining company, Dannemora Mineral AB, provided with blasting locations and times, as well as maps over the mine's orebodies and stopes. Seismic data acquired between 01 July 2014 - 25 March 2015 from 4 temporary seismic stations, deployed in the summer of 2014 surrounding the mine, along with 8 SNSN stations was analyzed. The project encompassed field work and processing of the data, which involved different methods to investigate the characteristics of the mine's seismicity: Statistics were kept to record the activity rate of the seismicity over time; spectral analysis was used to study the frequency content of the seismicity; particle motion plots were constructed to identify body-phases in the seismicity; Local Earthquake Tomography was used to upgrade the velocity model of the mine and to relocate the induced seismicity with more accuracy; cross-correlation was used to find events originating from similar sources; and finally, magnitude analysis was used to compare the different types of seismicity within the mine. Three main types of induced events were observed in the mine: low-frequency events with clear first arrivals, emergent events with long duration, and high-frequency events that could either have clear first arrivals or emergent-like with long durations. Through the analysis of their characteristics, they were linked to different types of rockbursts. The low-frequency events were linked to both reactivation of fault zones triggered by the mine activity, and rockbursts within the mine directly related to the mining. The emergent and high-frequency events were also linked to rockbursts directly related to the mine activity, e.g. ejection of rock from the tunnel walls or arch collapses in stopes.

Die vorliegende Arbeit beschreibt Herstellungsmöglichkeiten für sogenannte Saturn-Partikel. Es handelt sich dabei um Partikel, die auf ihrer Oberfläche drei Bereiche mit unterschiedlichen Eigenschaften aufweisen. Zwei Kappen mit gleichen Eigenschaften sind durch einen Gürtel getrennt, der sich stark von den Kappen unterscheidet. Im Speziellen geht es hier um die unterschiedliche Benetzbarkeit der Bereiche. Die Herstellung von Saturn-Partikeln mit einem hohen Benetzungskontrast wurde auf zwei verschiedenen Wegen realisiert. Als Ausgangspunkt dienten Mikroglaskugeln, die zunächst zur Hydrophobierung ihrer Oberfläche mit einem Silan behandelt wurden. Eine Art der Saturn-Partikel wurde durch das Ätzen eines Gürtels rund um die Partikel mit Flusssäure in einer im Rahmen dieser Arbeit entwickelten Spülzelle erzeugt. Auf diese Weise konnten Partikel mit zwei hydrophoben Kappen und einem hydrophilen Gürtel erhalten werden. Eine weitere Art dieser Partikel wurde durch das Abschleifen der Partikelkappen nach vorheriger Einbettung in Polymerfilme erhalten, wodurch die hydrophobe Beschichtung abgetragen und das ursprünglich hydrophile Glas freigelegt wurde. Die so erhaltenen Partikel wiesen zwei parallele, hydrophile Bereiche auf, die durch einen hydrophoben Gürtel voneinander getrennt waren. Es wird gezeigt, dass Saturn-Partikel in Systemen mit Wasser und Öl beim Mischen von unterschiedlichen Anteilen der drei Phasen durch Selbstorganisationsprozesse verschiedene Strukturen wie Ketten oder Schichten ausbilden können. Des Weiteren sind sie in der Lage in einem System mit Wasser und Luft besondere Schäume auszubilden, die eine sehr hohe Stabilität aufweisen. Die Partikel stabilisieren darin Flüssigkeitsfilme zwischen den Luftblasen, wobei der hydrophile Gürtel im Wasserfilm und die hydrophoben Kappen in der Luft liegen.

L’objectif du présent projet est de développer une méthodologie pour la modélisation fondamentale de procédés de polymérisation en émulsion sans tensioactif stabilisés par des particules inorganiques, dénommées "polymérisation en émulsion Pickering". La modélisation des systèmes de polymérisation en émulsion nécessite la modélisation de la distribution de taille des particules (PSD), qui est une propriété importante d'utilisation finale du latex. Cette PSD comprend des sous-modèles dédiés à la nucléation des particules, le transfert de masse entre les différentes phases (monomère, radicaux, stabilisant) et la coagulation des particules. Ces modèles devraient de préférence être validés expérimentalement de manière individuelle. La première partie principale du travail est consacrée à l'étude expérimentale. Cette partie peut être divisée en trois parties. La première partie décrit l'adsorption de particules inorganiques sur le polymère sans réaction. Une adsorption multicouche a été observée et l’isotherme B.E.T. a été capable de décrire cette adsorption. L'adsorption se révèle être plus importante pour une force ionique plus élevée. La dynamique d'adsorption semple être rapide et par conséquent le partage peut être considéré à l'équilibre pendant la polymérisation. La deuxième partie concerne l'étude de différents paramètres de réaction sur le nombre de particules et la vitesse de réaction dans des polymérisations ab initio. L'effet du mélange, de la concentration initiale des monomères et de la concentration de l'initiateur a été étudié. L'optimisation de ces conditions a été utile pour la partie de modélisation. La dernière partie décrit les différences entre plusieurs Laponite® à travers la polymérisation en émulsion ab initio du styrène.La deuxième partie principale du manuscrit a porté sur la modélisation de la polymérisation en émulsion Pickering. Le modèle de bilan de population et le nombre moyen de radicaux par particule ont été calculés en fonction de l'effet des particules organiques. La croissance des particules de polymère a été optimisée en ajustant les modèles d'entrée et de désorption des radicaux décrits dans la littérature aux données expérimentales. Aucune modification n'a été nécessaire, ce qui nous a permis de conclure que l'argile n'avait aucune influence sur l'échange radical. Cependant, la stabilisation joue un rôle important dans la production de particules de polymère. Le modèle de nucléation coagulante a été capable de décrire le taux de nucléation et de prédire le nombre total de particules
The aim of the present project is to develop a methodology for fundamental modeling of surfactant-free emulsion polymerization processes stabilized by inorganic particles, referred to as “Pickering emulsion polymerization”. Modeling emulsion polymerization systems requires modeling the particle size distribution (PSD), which is an important end-use property of the latex. This PSD includes submodels dedicated to particle nucleation, mass transfer between the different phases (monomer, radicals, stabilizer), and particle coagulation. These models should preferably be individually identified and validated experimentally. The first main part of the work is dedicated to the experimental study. This part can be divided in three parts. The first part describes the adsorption of inorganic particles on polymer without reaction. Multilayer adsorption was observed and B.E.T. isotherm was able to describe this adsorption. The adsorption was found to be enhanced at higher ionic strength. The adsorption dynamics were found fast and therefore clay partitioning can be considered at equilibrium during polymerization. The second part concerned the investigation of different reaction parameters on the particles number and reaction rate in ab initio polymerizations. The effect of mixing, initial monomer concentration and initiator concentration were considered. Optimization of these conditions was useful for the modeling part. The last part described the differences between several LaponiteR_ grades through the ab initio emulsion polymerization of styrene. The second main part of the manuscript focused on the modeling of the Pickering emulsion polymerization. The population balance model and average number of radicals balance were adapted regarding the effect of inxi organic particles. The growth of the polymer particles was optimized by fitting the models of radicals’ entry and desorption described available in literature to the experimental data. No modification was needed, which allowed us to conclude that the clay had no influence on radical exchange. However, LaponiteR_ stabilization played an important role in polymer particles production. Coagulative nucleation model was able to describe the nucleation rate and predict the total number of particles

In this work, the oil-dispersed polydimethylsiloxane (PDMS) sterically stabilised poly(Methl Methacrylate-2Vinyl Pyridine) p(MMA-2-VP) particles are investigated for use as Pickering emulsifiers with varied emulsification conditions (pH, particle concentrations and oil-water volume ratios) and their adsorption behaviours on 2-Dimensional curved oil-water interface. These particles are synthesised by dispersion polymerisation in dodecane and their particle content can be controlled by varying the initial MMA: 2-VP ratio (uncrosslinked particles with varied MMA-2-VP ratio in particle cores) and crosslinker concentrations (cross-linked particles with constant initial MMA-2-VP ratio). Transitional phase inversion from w/o to o/w emulsions which are stabilised by oil-dispersed p(MMA-2-VP)-PDMS particles is induced by tuning pH from 6 to 2 in aqueous phase, regardless of particle concentrations. It is the first time reported of such phase inversion in emulsions stabilised with responsive emulsifiers by responding to the relevant environmental trigger. This phenomenon occurs only in the emulsion systems that prepared in the presence of such oil-dispersed particles containing more than 62% p2-VP in cores. The particles which synthesised with 5 mol% (respect to monomer concentration) cross-linkers can stabilise most stable emulsions than others, in particular the o/w emulsion, no released oil can be observed after 10 months preparation. Pickering emulsions are also prepared by changing the oil-water volume ratio under different pHs. Catastrophic emulsion phase inversion from single emulsions to multiple emulsions are observed under certain experimental conditions, indicating that such phenomenon is not only controlled by increased dispersed phase fraction in emulsion systems but also governed by the proton concentration/quantity in aqueous phase. The o/w high internal phase emulsion gels are stabilised by such oil-dispersed pH responsive particles which synthesised with 5 mol% (respect to monomer concentration) cross-linkers at pH 2 with 70 vol% oil phase. Eventually, the measurement of interfacial tension as a function of time in the presence of varied concentrations of oil-dispersed pH responsive particles are performed basing on a pendant drop method. Oil-dispersed pH responsive particles are more interfacially active at uncharged state than charged state. The adsorption coefficient value is large at charged state (pH2) than uncharged state (pH 6), implying the fact that such particle stabilised emulsion properties are governed mainly by their adsorption kinetics.

The thesis constitutes an investigation into the production of floating photocatalytic particles (FPP) as a low cost, low carbon footprint and chemical-free wastewater treatment. It is anticipated that this approach would be particularly attractive for developing countries where it could reduce incidences of disease and pollution. The particles were manufactured from cocoa butter (CB), and contained either photocatalytic nanoparticle titanium dioxide TiO2 (P25) or silver-doped TiO2 (0.5% w/w). The photocatalytic activity of the particles was evaluated by means of the decolourisation of the dye indigo carmine (IC). Three arrangements were used; small scale treatment using Petri dishes, an 1800 ml batch-recirculation photoreactor and an 8 litre UV contactor. Membrane emulsification (ME) was the technique used here to generate particles of controlled size. The particles were in effect what are known as Pickering emulsions in which the solid fat core (CB) was stabilised by TiO2 nanoparticles, resulting in composite particles that float easily and can receive incident light to generate highly reactive free radical species. The FPPs were characterised by FEGSEM and EDs mapping analysis, and the images obtained displayed a spherical structure with a rough outer surface, and the EDs showed a good coverage of TiO2 on the surface of at a maximum loading of 10% w/w. Tests were conducted to assess the stability of the particles when used in repeated cycles. Reuse of the particles caused a significant drop of photodegradation activity after four cycles to 42% of that of freshly prepared particles. The correlation of photocatalytic activity with silver dosage was also investigated. The highest photocatalytic activity was achieved at 0.5 wt. % of silver doped TiO2 and was some 10% greater than for un- doped particles. The organic carbon release resulted from TOC analysis for the FPPs that were exposed to UV light for 8.5 hr in water was less than 1 wt. %. First order reaction kinetics were exhibited during decolourisation of IC dye with respect to the initial dye concentration, radiation intensity, percentage coverage of the liquid surface by the FPPs, and the catalytic loading. For a static system (i.e. no forced convection), the most effective surface coverage was identified as being in the range of 60 to 80%. A linear source spherical emission model (LSSE) was adopted to estimate the intensity of the incident radiation on the surface of the FPP layer in the photoreactor and validated. In addition, a preliminary kinetic model to describe of the effect of the photocatalytic active surface concentration of TiO2 as well as the efficient intensity flux in the kinetic model was developed for the FPP layer photoreactor.

Water-in-oil-in-water (W/O/W) double emulsion systems provide an innovative approach for the development of low-fat healthier foods. By replacing a proportion of the oil phase of a simple oil-in-water (O/W) emulsion with an internal water phase, the overall oil volume within the emulsion system can be decreased, with potentially negligible changes to its organoleptic properties. However, double emulsions are notoriously unstable for adequate periods of time, largely due to the existence of two oppositely curved water-oil (W/O) and oil-water (O/W) interfaces in close proximity. The present study investigates the use of Pickering stabilisation in order to enhance the stability of double emulsions. Pickering stabilisation mechanisms are reputed for superior, longer term stabilisation capacities when compared to conventional surfactant stabilised emulsions, but edible particles with Pickering functionality are scarce. The work in this thesis explores the impact of introducing Pickering stabilisation to a double emulsion structure, initially at only one of the two water/oil interfaces (either W/O or O/W) and ultimately across the entire interfacial areas. Initial work conducted centred on investigating the role of a range of edible particulates as potential Pickering stabilisers in simple emulsions (both W/O and O/W emulsion types). Based on the knowledge gained from these studies, a range of Pickering-Surfactant stabilised double emulsions (with particles or surfactant stabilising alternate interfaces), using a range of surfactants, and Pickering only stabilised double emulsion systems were prepared and analysed in terms of their microstructure, stability and encapsulation efficiencies.

Bicontinuous Pickering emulsions (or bijels) are a relatively new class of novel soft material with many potential industrial applications, including microfluidics, tissue engineering and catalysis. They are typically formed by initiating the spinodal decomposition of a binary liquid mixture in the presence of neutrally-wetting colloidal particles. The particles attach at the liquid-liquid interface and arrest the phase separation by jamming when the concentration of particles approaches the 2D close-packing limit. Predicted by simulations in 2005 and realized in the laboratory in 2007, many aspects of the bijels complex behaviour and properties have remained unexplored. This thesis expands the knowledge of the bijels structural and dynamical properties, while focusing specifically on the role of particle size. The bijels porosity (average interfacial separation L) according to simulations can be controlled by varying the size r and volume fraction ϕ of particles in the system (L ∝ r/ϕ). The inverse scaling of L with ϕ has been verified for one size of particle, but to access smaller values of L (to allow the structure to be used for a wider range of industrial applications) the scaling with r must be tested. Chapter 3 presents the first systematic study of reducing particle size in bijels made with the liquid pair water/lutidine (W/L).We find that a five-fold reduction in r only requires moderate modification to preparation methods (concentrations of reactants during particle synthesis and increased particle sonication time) and in principle allows L values of between 1 & 10 μm to be accessed in the W/L system, where previously 10 μm was the limit. We demonstrate that this reduced lower bound of L can be translated into a lower bound for polymerized bijels also. Unfortunately, reducing particle size even further (in the same way) reveals a law of diminishing returns, as the uptake fraction of particles to the interface also reduces as we reduce particle size. Hence, to reduce lengthscale even further, a new bijel fabrication paradigm is required. Unexpectedly, we find that the temperature quench rate becomes less important for smaller particles (which constitutes a direct material synthesis advantage) and develop a new theoretical framework to take account of this observation. Large particles promote domain pinch-off during the coarsening (due to a larger driving force towards spontaneous curvature) resulting in bijel failure when slow rates are used because the time required to jam is greater than the time required for depercolation. To further probe the bijels structure as a function of particle size and quench rate, and to account for the success/failure scenarios which seem not to depend on L, in Chapter 4 we quantitatively characterize the morphology by measuring distributions of interfacial curvatures. By computing area-averaged quantities to make valid comparisons, we find that smaller particles and faster quench rates produce bijels with greater hyperbolic `open' character, aligning with our understanding of bijel formation gained from Chapter 3. We compare to simulated bijel data and an estimate of the hyperbolicity of the bare liquids undergoing spinodal decomposition, validating the results. In addition, we uncover a time-dependent `mutation' of the curvature distributions when large particles are used, but not when smaller particles or a different liquid pair is used. The mutation appears to correlate with the propensity of the interfacial particles to form a 'monogel', whereby the interfacial particles develop permanent bonds and remain as a 3D percolating network after the interface is removed, although the precise mechanism of the mutation is still to be verified. Following the results from Chapters 3 & 4 it is clear that there are potentially microscopic phenomena in the bijel which result in macroscopic aging and/or a determination of macroscopic structural properties. To investigate further, we use diffusing-wave spectroscopy (a form of light scattering) to probe the microscopic dynamics of the interfacial particles and/or the particle-laden liquid-liquid (L-L) interface. We find that bijel dynamics show two-step (fast/slow) decay behaviour, with the dynamics slowing as the system ages. The two-step decay is very similar to that observed in colloidal gels formed by diffusion-limited cluster aggregation (DLCA), with the initial (fast) decay due to thermally-activated modes of the gel network, and the later (slow) decay due to the relaxation of internal stresses induced by gel syneresis. For a bijel, the internal stresses could be due to syneresis, but could also be due to the jamming transition and/or the monogelation process and/or the forces acting on the L-L interface by the particle layer. In terms of the aging, if the system does not form a monogel, the correlation functions can be (almost) rescaled on to a master curve, indicating the property of universal aging. If the system does monogel, the functions cannot be superimposed, implicating the monogelation process as a potential cause for a different kind of aging in this system. Due to the interesting differences found when changing the size of the stabilizing particles in a bijel, in Chapter 6 we combine large and small particles (making `bimodal' bijels) and look for evidence of particle segregation by size, quantitatively estimate the ratio of particle uptake fractions and measure kinetics. Larger particles are found to adsorb to the interface in twice the quantity as smaller particles, and we find evidence to suggest the preference of larger particles for interfaces curved in only one direction, corroborating results from previous Chapters. Bimodal bijels take longer to jam than an equivalent monomodal (standard) bijel, which is backed up by simulations and highlights the increased ability of the bimodal particles to reorganise at the interface before arriving at the jammed metastable state. Finally, we also observe that the lengthscale of a bimodal bijel can heavily depend on the quench rate used during the preparation, suggesting that quench rate could be used (as well as particle size, volume fraction and contact angle) as a lengthscale control parameter. This thesis adds to the bijel literature, building on previous experimental studies and verifying/contradicting simulations. Particle size is shown to be a pivotal parameter for bijel formation in the W/L system, with particles of size r = 63 nm proving more versatile (markedly less sensitive to quench rate) than particles of size r ≈ 300 nm. However, even-smaller particles (of the same type) do not provide any additional advantage. We also show how the particle size can not only control bijel porosity (according to L ∝ r/ϕ as predicted by simulations) but can control bijel topology (smaller particles result in structures with greater hyperbolic character). By monitoring the bijel structure over time (topology and dynamics) we have shown that the bijel (in some cases) continues to age for at least c. 1 hr (topology) and in all cases c. 1 day (dynamics). For the first time experimentally, we have used a bimodal dispersion of particles to stabilize a W/L bijel and have uncovered a potentially useful new way to produce samples with different porosities from the same starting mixture, by changing the quench rate. The knowledge of the interplay between particle size and quench rate along with the effect on bijel topology will both assist in the scaling up of processes for industrial-level production and inform future strategies for tailoring the structure for specific applications. Future research should focus on several remaining open questions. The volume fraction of r = 63 nm particles in the W/L system should be increased towards 10% and sonication procedures improved to allow good redispersion to test the lower bound of L, which we expect to be around 1 μm. Also, a new W/L fabrication paradigm should be devised which uses sterically-stabilized particles, to continue the reduction of r towards the value used in simulations (5 nm) in order to test the fundamental physics of bijel formation, specifically what value of interfacial attachment energy is needed for long-term stability. Bijel dynamics can be further probed by using a technique which allows a variation in the probe lengthscale (e.g.
differential dynamic microscopy, DDM), as well as developing a better theoretical model for (multiple) light scattering in a bijel system to arrive at the mechanisms responsible for the anomalous aging, and compare to the predictions of monogelation. Finally, higher magnification/resolution microscopy should be used to look for particle segregation on the liquid-liquid interface (as seen in simulations) and to identify in real-space the locations of the changes in Gaussian curvature over time as measured in Chapter 4.

Ce travail de thèse décrit l'élaboration de latex hybrides oxyde de fer (OF)/polymère par polymérisation en émulsion sans tensioactif. Des nanoparticules d'OF cationiques ont été tout d'abord synthétisées par co-précipitation de sels de fer dans l'eau. Des latex hybrides magnétiques ont été ensuite obtenus par deux voies de polymérisation. La première consiste en la synthèse de particules de latex de morphologie 'carapace' par polymérisation en émulsion Pickering du styrène et du méthacrylate de méthyle (MMA). Un comonomère auxiliaire (acide (méth)acrylique ou acide 2-acrylamido-2-méthyl-1-propane sulfonique) a été utilisé pour favoriser l'adsorption des OF à la surface des particules de polymère produites. Les analyses par MET indiquent la présence d'OF à la surface des particules de polymère (structure carapace). L'analyse thermogravimétrique a permis de quantifier l'efficacité d'incorporation des OF, i.e. la fraction d'OF initialement introduits effectivement adsorbés à la surface des particules. L'efficacité d'incorporation augmente avec la quantité de comonomère auxiliaire, le pH et la concentration en OF et dépend de la nature du monomère hydrophobe. Dans la deuxième voie, les OF ont été encapsulés par polymérisation radicalaire contrôlée par transfert de chaîne réversible par addition-fragmentation (RAFT) en émulsion aqueuse. La stratégie utilisée repose sur l'utilisation de macroagents RAFT amphiphiles comportant des groupements acide carboxylique connus pour interagir avec la surface des OF. L'interaction entre les macroRAFTs et les OF a été étudiée à travers le tracé de l'isotherme d'adsorption. Des analyses SAXS et DLS indiquent la formation de clusters d'oxyde de fer. Ces derniers ont été ensuite engagés dans la polymérisation en émulsion du styrène ou d'un mélange de MMA et d'ABu (ratio massique : 90/10) pour former une écorce de polymère à leur surface. Les particules carapace et les OF encapsulés affichent un comportement superparamagnétique
This work describes the elaboration of polymer/iron oxide (IO) hybrid latexes through surfactant-free emulsion polymerization. Cationic iron oxide nanoparticles stabilized by nitrate counterions were first synthesized by the co-precipitation of iron salts in water. Magnetic hybrid latexes were next obtained by two polymerization routes carried out in the presence of IO. The first route consists in the synthesis of polymer latexes armored with IO via Pickering emulsion polymerization of methyl methacrylate (MMA) or styrene (St). An auxiliary comonomer (namely methacrylic acid, acrylic acid or 2-acrylamido-2-methy-1- propane sulfonic acid) was used to promote IO particle adhesion to the surface of the generated polymer particles. TEM showed the presence of IO at the surface of the polymer particles and the successful formation of IO-armored polymer particles. TGA was used to quantify the IO incorporation efficiency, which corresponds to the fraction of IO effectively located at the particle surface. The incorporation efficiency increased with increasing the amount of auxiliary comonomer, suspension pH and IO content or with increasing monomer hydrophobicity. In the second route, IO encapsulation was investigated via reversible addition-fragmentation chain transfer (RAFT)-mediated emulsion polymerization. The developed strategy relies on the use of water-soluble amphipathic macromolecular RAFT agents containing carboxylic acid groups, designed to interact with IO surface. The interaction between the macroRAFT agents and IO was investigated by the study of the adsorption isotherms. Both DLS and SAXS measurements indicated the formation of dense IO clusters. These clusters were then engaged in the emulsion polymerization of St or of MMA and nbutyl acrylate (90/10 wt/wt) to form a polymer shell at their surface. Both IO-armored latex particles and polymer-encapsulated clusters display a superparamagnetic behavior

La valorisation de la biomasse pour des applications de haute valeur ajoutée est un véritable défi scientifique, technologique et environnemental. Valoriser le bois et stimuler son usage industriel vers des applications durables est un enjeu climatique : le bois et la forêt sont des puits de carbone. Les fonctionnalités natives du bois lui confèrent des propriétés hydrophiles et hydrophobes pour se placer aux interfaces et stabiliser des émulsions. Ces recherches constituent donc une réponse aux questions de substitution de surfactifs issus de la pétrochimie par des matériaux naturels, renouvelables et biodégradables. Des études multiparamètres ont permis de comparer l’efficacité d’émulsification et de stabilisation d’émulsions en fonction des paramètres de procédé (technologie Ultra-Turrax UT, technologie Ultra-Sons US), et de formulation. Des émulsions stables sont générées à partir de dépenses énergétiques qui dépendent de la technologie mise en place (3000 kJ.L-1 par sonde à US et 6000 kJ.L-1 par UT). En formulation, des bornes ont été déterminées, en concentration en particules (0,31 g.L-1 à 2,37 g.L-1), en fraction volumique d’huile (0,1 à 0,6), en pH (3 à 9) et en salinité (< 2 g.L-1) pour délimiter les zones de meilleure stabilité des émulsions directes et utiles pour des changements d’échelles de travail (> TRL 4). Des voies de modification des propriétés de surface des particules de bois ont été abordées pour obtenir des émulsions inverses et multiples. Les particules de bois sont des nouveaux candidats performants pour la stabilisation des émulsions
The valorization of biomass for high value-added applications is a real scientific, technological and environmental challenge. Valuing wood and stimulating its industrial use towards sustainable applications is a climatic issue: wood and the forest are carbon sinks. The native features of the wood give it hydrophilic and hydrophobic properties for interfacing and stabilizing emulsions. This research is therefore an answer to the question of substitution of surfactants from petrochemicals by natural, renewable and biodegradable materials. Multiparameter studies have made it possible to compare the emulsification and emulsion stabilization efficiency as a function of process (Ultra-Turrax UT technology, Ultra-Sound US technology) and formulation parameters. Stable emulsions are generated from energy expenditure that depends on the technology implemented (3000 kJ.L-1 for the US probe and 6000 kJ.L-1 for UT). In formulation, limits were determined, in particle concentration (0,31 g.L-1 to 2,37 g.L-1), in volume fraction of oil (0,1 to 0,6), in pH (3 to 9) and in salinity (< 2 g.L-1) to delimit zones of better stability of direct emulsions, useful for upscaling studies (> TRL 4). Pathways for modifying the surface properties of wood particles have been addressed to obtain inverse and multiple emulsions. Wood particles are new and powerful candidates for the stabilization of emulsion

Les microgels sont des particules colloïdales polymères faiblement réticulées, capables de se gonfler d’un solvant, de se déformer et de s’adsorber à des interfaces liquides. Parmi eux, les microgels de poly(N-isopropylacrylamide) (pNIPAM) sont thermosensibles et présentent une contraction en volume lorsque la température est supérieure à la température de transition de phase volumique, notée VPTT. De précédents travaux ont montré leur capacité à stabiliser des émulsions de Pickering : les émulsions peuvent être stables à des températures inférieures à la VPTT et être déstabilisées sur demande au-dessus de celle-ci. Afin d’approfondir la compréhension du mécanisme de stabilisation des émulsions, nous discutons le rôle de la structure des microgels sur leur adsorption, leur organisation à des interfaces modèles, les propriétés mécaniques des interfaces et les propriétés des émulsions résultantes en terme de stabilité (cinétique, mécanique) et de propriétés d’écoulement. Le rôle de la réticulation, de la présence de charges et de la taille est étudié pour le modèle du pNIPAM. Nous démontrons le lien existant entre conformation et propriétés macroscopiques des émulsions. En prenant en considération à la fois la structure des microgels et les procédés de formulation (voies d’émulsification), des émulsions avec des propriétés rhéologiques et des états de floculation variés peuvent être obtenues. Fort de ces connaissances, les concepts établis à l’aide des microgels de pNIPAM seront généralisés à d’autres familles de microgels, d’une part des systèmes biocompatibles avec des dérivés comportant des chaînes pendantes oligo(éthylène oxyde), d’autre part des microgels sensibles à des stimuli biologiques tels que la reconnaissance de sucre
Microgels are soft and deformable colloidal particles that are swollen by a solvent and display the ability to deform and adsorb at liquid interfaces. The poly(N-isopropylacrylamide) (pNIPAM) microgels are thermo-sensitive and exhibit a volume contraction when the temperature is raised above the volume phase transition temperature (VPTT). These particle have shown high potential as Pickering emulsions stabilizers: emulsions could be stable at ambiant temperature, below the VPTT and destabilize on-demand above it. To get insight into understanding of the emulsion stabilization mechanism, we systematically discuss the relation between the microgel structure, their adsorption, their organization at model interfaces, the viscoelastic behavior of the interface and the resulting emulsions properties in terms of stability and flow behavior. In the present work, using pNIPAM as model microgels, we investigate the effect of their cross-linking density, their size and their charge density. Varying the microgels structures and the formulation conditions (emulsification process), we could control the emulsions flocculation state and rheological behavior. Based on this knowledge, we propose to synthesize new biocompatible microgels as emulsion stabilizers. Using ligand-modified microgels sucrose-sensitive emulsions may be obtained, enlarging the possible application domains

Les émulsions de Pickering ont suscité un intérêt croissant dans de nombreux domaines de la recherche en raison de leur grande stabilité et versatilité. Une attention particulière a été accordée à la fabrication des systèmes complexes et originaux qui peuvent être obtenus avec différentes particules. Cette étude a consisté dans l'analyse des différents paramètres physico-chimiques des particules, des milieux liquides et des systèmes dispersées, et leur relation avec le comportement mécanique et la structure des émulsions afin de prédire et de moduler les caractéristiques de ces dernières. Nous avons étudié plus particulièrement pour la première fois, le diagramme de phase concernant les inversions de phase du type catastrophique et transitionnelle des émulsions de Pickering. Nous avons utilisé des particules de silice avec des structures et hydrophobicités différentes. En particulier, nous avons montré que le mélange de particules de différente hydrophobicités peut moduler finement l'inversion de phase aussi bien que les propriétés rhéologiques et structurales des émulsions. La fabrication de membranes à partir des émulsions de Pickering précédentes a été proposée comme un exemple de l'utilisation de ces systèmes modèles pour la conception de matériaux complexes
Pickering emulsions have gained interest in many fields of research due their properties like higher stability and versatility. Special attention has been given to the processing of complex and original systems which can be obtained by using different particles. This study consists in the analysis of the different physicochemical parameters of particles, liquid media as well dispersion systems, and their relationship with emulsions structural and mechanical behavior in order to predict and modulate the emulsions characteristics. We studied extensively for the first time the phase diagram of catastrophic and transitional phase inversion of Pickering emulsions. We used silica particles with different structure and hydrophobicity. In particular we showed that mixing particles with different hydrophobicity can finely modulate the phase inversion as well the rheological and structural properties of the emulsions. The manufacturing of emulsified membranes based on previous Pickering emulsions was proposed as an example of the use of these systems as templates for the design of complex materials

La stabilisation dite de Pickering repose sur l'utilisation de particules solides au lieu des émulsifiants. Leur forte adsorption aux interfaces confère à celles-ci une rigidité les protégeant de la coalescence. Ce travail se partage en quatre grandes parties. Un premier volet traite de la fabrication de ces particules et de leur caractérisation physico-chimique. Une deuxième partie traite de la formulation d'émulsions H/E selon deux procédés différents et leur caractérisation. La troisième partie avait pour but l'investigation du comportement de ces particules à l'interface H/E par diffusion de neutrons. La dernière partie traite de l'évaluation de ces émulsions pour l'application cutanée. Ce travail a pour objectif de formuler des émulsions de Pickering en utilisant des particules polymériques biodégradables. Des particules individualisées formées à partir de copolymères di-blocs du type : PCL-b-PEG et PLA-b-PEG, ont été fabriquées selon un procédé de nanoprécipitation innovant. Elles ont été caractérisées en termes de taille et de stabilité. Leur structure interne a également été investiguée par RMN et cryo-MET. Leur aptitude à stabiliser des émulsions H/E très concentrées a été démontrée. L'impact du procédé d'emulsification sur les propriétés finales a été souligné et l'adsorption de particules en forme de chapelets serrés à l'interface a été visualisée par diffusion de neutrons et microscopie électronique après cryofracture. L'absorption du rétinol dans la peau à partir de ces émulsions innovantes, a montré une accumulation accrue de cet actif dans le stratum corneum comparée à celle d'une émulsion stabilisée par des tensioactifs classiques. Cette absorption cutanée a été montrée dépendre du procédé de fabrication des émulsions. Les particules en suspension aqueuse ont aussi été testées pour l'encapsulation et la libération cutanée du rétinol. Les résultats ont montré l'influence de la constitution interne des particules (PCL ou PLA) sur l'absorption du rétinol dans la peau. L'utilisation de polymères biodégradables apporte de nouvelles perspectives dans la formulation des émulsions de Pickering à usage cosmétique ou pharmaceutique, en s'affranchissant des effets jugées hasardeux pour la santé humaine des particules inorganiques
The so-called Pickering stabilization is based on the use of solid particles instead of emulsifiers. Their strong adsorption at interfaces confers rigidity preventing them from coalescence. This work is divided into four main parts. The first part deals with the manufacture of these particles and their physicochemical characterization. A second part deals with the O/W emulsions formulation according to two different methods and their characterization. The third part is an investigation into the behavior of these particles at the O/W interface by small angle neutron scattering. The last part deals with the evaluation of these emulsions for their application to skin delivery. This work aims at the preparation of Pickering emulsions using biodegradable polymeric particles. Individual particles formed from diblock copolymers such as: PCL-b-PEG and PLA-b-PEG, were made by an innovative nanoprecipitation process. They were characterized in terms of their size and stability. Their internal structure was also investigated by NMR and cryo-TEM. Their ability to stabilize highly concentrated O/W emulsions has been demonstrated. The impact of the emulsification process on the final properties was emphasized and the adsorption of particles as tight necklaces at the interface was visualized by neutron scattering and freeze-fracture electron microscopy. The skin absorption of retinol from these innovative emulsions showed enhanced accumulation of the asset in the stratum corneum compared to conventional surfactant-stabilized emulsions. Such skin absorption of retinol was shown to depend on the manufacturing method of the emulsions. Particles in aqueous suspension were also tested for encapsulation and delivery of retinol in skin. The results showed the influence of the internal structure of the particles (PCL or PLA) on the absorption of retinol in the skin. The use of biodegradable polymers brings new perspectives in the formulation of Pickering emulsions for cosmetic or pharmaceutical use, while avoiding the effects of inorganic particles considered hazardous to human health

Les microgels sont des particules colloïdales de polymère réticulé gonflées par un solvant. Déformables et poreuses, elles peuvent changer d’état de gonflement lors de l’application d’un stimulus. Ce travail de thèse a pour but de développer de nouveaux concepts tirant profit des propriétés stimulables et de la déformabilité intrinsèque des microgels tout en approfondissant les connaissances sur le comportement de ces objets en solution et aux interfaces. Les microgels de poly(N-alkylacrylamide) sont utilisés comme modèles. Dans un premier temps, notre travail a porté sur l’étude d’un nouveau type de microgels électrochimiluminescents grâce à l’incorporation d’un complexe métallique de ruthénium dans la matrice polymère. A la transition de phase, ces microgels présentent une exaltation de l’intensité ECL jusqu’à 2 ordres de grandeur, en lien avec la distance entre les sites redox. Le concept est ensuite transposé à des microgels sensibles aux saccharides et à des systèmes comportant deux luminophores, un donneur ECL et un accepteur d’énergie pouvant donner lieu à un transfert d’énergie par résonance. La deuxième partie de la thèse est consacrée à l’adsorption de microgels à une interface liquide-liquide plane, en vue de mieux comprendre l’origine de la stabilité des émulsions stabilisées par ce genre d’objets. De façon analogue aux protéines flexibles, les microgels changent de conformation à l’interface, passant d’un état étendu à un état comprimé, à l’origine de variations de l’élasticité interfaciale. Les microgels ainsi adsorbés sont fonctionnalisés de façon régiosélective dans l’eau et permettent de produire des microgels non symétriques, dits Janus, susceptibles de s’auto-assembler
Microgels are colloidal particles made of cross-linked polymer swollen by a solvent. Soft and porous, they can adapt their swelling degree in response to a stimulus. The main objective of this work is to develop new concepts taking advantage of microgels’ stimuli-responsive properties and intrinsicsoftness while deepening understanding of their properties in solution and at interfaces. Poly(Nalkylacrylamide) microgels are used as a model. Initially our work focused on the study of a new type of electrochemiluminescent (ECL) microgels thanks to the incorporation of a ruthenium complex in the polymer matrix. At the volume phase transition, these microgels exhibit an amplification of the ECL intensity up to 2 orders of magnitude, related to the decrease of the distance between redox sites. This concept is then transposed to saccharides-sensitive microgels and systems bearing two luminophores, an ECL donor and an energy acceptor in order to give rise to resonance energy transfer. The second part of this manuscript is devoted to adsorption of microgels at a planar liquid-liquid interface, to improve knowledge on the origin of the stability of emulsions stabilized by such objects. Such as flexible proteins, microgels can change their conformation at the interface, from an extended to a compressed state, causing variation in the interfacial elasticity. When microgels are adsorbed they can also be functionalized regioselectively in water to produce non-symmetrical microgels, called Janus, able to self-assemble

Des émulsions particulièrement stables peuvent être formulées à l'aide de particules colloïdales (émulsions dites de Pickering). L'objectif de cette étude est d'accéder à la compréhension des mécanismes de stabilisation des interfaces, ainsi que du lien entre propriétés interfaciales et propriétés macroscopiques des émulsions. Dans ce cadre, la stratégie adoptée repose sur l'utilisation de particules colloïdales dont les caractéristiques peuvent être variées continûment à la fois en amont par la chimie de synthèse (variation de la mouillabilité, de la déformabilité) et in situ par un stimulus (pH, sel, température...). De plus, les émulsions stabilisées par de telles particules deviennent, elles aussi, sensibles aux stimuli et la déstabilisation des émulsions peut être déclenchée à la demande. Les mécanismes d'adsorption, les interactions entre particules aux interfaces et les propriétés résultantes des émulsions sont étudiés. L'établissement de concepts généraux régissant la stabilisation/déstabilisation des émulsions permet d'en contrôler, via la formulation ou le procédé (température, cisaillement), les propriétés d'usage. Enfin les émulsions stabilisées par des particules colloïdales peuvent être utilisées en tant que précurseurs dans la formulation de matériaux plus complexes : ceci est illustré par l'élaboration de capsules à libération thermostimulée.

La stabilisation des émulsions peut être assurée par des particules solides plutôt qu'avec des molécules d'émulsifiant. Les émulsions stabilisées par des particules solides sont aussi appelées “les émulsions de Pickering”. Ce travail est divisé en deux parties :
1) l'étude des aspects physico-chimiques des émulsions ; 2) l'évaluation des émulsions stabilisées par des solides pour l'application cutanée.
Les émulsions ont été stabilisées avec des nanoparticules de silice de caractère hydrophobe varié. Les émulsions huile-dans-eau obtenues avec de la silice partiellement hydrophobe ont été caractérisées en termes de stabilité, rhéologie et de quantité optimale de particules nécessaires pour la stabilisation. Les particules de silice hydrophile stabilisent les émulsions H/E avec des huiles très polaires. Le rôle de l'agrégation des particules en présence d'huile et d'électrolyte dans la stabilisation des émulsions a été souligné. Dans un deuxième temps, nous avons étudié l'absorption de principes actifs dans la peau, à partir des émulsions de Pickering, et nous avons comparé les résultats avec les émulsions classiques stabilisées par les tensioactifs. Les émulsions H/E et E/H avec des principes actifs modèles (rétinol comme molécule lipophile et caféine comme molécule hydrophile) ont été étudiées en terme d'absorption dans la peau. L'absorption des principes actifs a été significativement différente pour les émulsions stabilisées par des particules solides et pour les émulsions stabilisées par des molécules de tensioactif. Les émulsions de Pickering constituent une nouvelle formulation pour l'application cutanée.

Ce travail de thèse est une contribution à l'étude des émulsions de Pickering qui ont vu unregain d'intérêt ces dernières années. Bien que l'effet Pickering ait été décrit depuis plus d'un siècle,des études plus systématiques pour comprendre l'activité des particules solides aux interfacesliquide/liquide n'est que partiellement entrepris, surtout en cours de déformation. Plusieurs questionsrestent d'actualité et, en premier, la localisation même des particules à l'interface et le mécanismed'adsorption associé.L'approche proposée dans ce travail de thèse s'inscrit dans cette optique avec en particulier laconsidération d'un événement élémentaire d'une émulsion : une goutte isolée dans une matrice etexaminée suite à un saut de déformation en cisaillement dans un dispositif de cisaillement contrarotatifdéveloppé à PCI. De manière générique, le but est de comprendre la relation entre le comportement dela goutte et la rhéologie complexe (en volume ou en surface) apportée par la dynamique de particulessolides aux interfaces liquide/liquide mobiles. Plusieurs paramètres ont été étudiés en commençant parl'affinité chimique des particules solides avec les phases liquides, la rhéologie des phases liquides, laconcentration et la taille des particules solides ; et pour finir, une attention particulière a été portée àl'effet de la déformation macroscopique et l'âge de la goutte.Plus particulièrement, la mise en évidence de la synergie entre la déformation macroscopiqueet l'âge de la goutte, sur la dynamique d'adsorption des particules à l'interface liquide/liquide et lastructuration de l'interface composée, a permis de proposer une méthodologie pour la modulation de" l'effet mémoire induite par la déformation " lors de la relaxation de la goutte en modifiant lasurface des particules par adsorption de tensioactifs choisis. Ainsi, il a été possible de figer les gouttesliquides dans des formes anisotropes contrôlées. Ce phénomène a été corrélé à une transition liquidesolidede l'interface composée mise en évidence par des mesures des modules rhéologiquesinterfaciaux. Ces derniers ont été, par ailleurs, reliés quantitativement à l'anisotropie des gouttesfigées.

Emulsões são sistemas formados quando dois componentes imiscíveis são misturados, na forma de gotículas dispersas numa fase contínua, estabilizados pela ação de emulsificantes, compostos anfifílicos, com afinidades por ambas as fases do sistema. No caso de emulsões de Pickering, o sistema é estabilizado por partículas coloidais sólidas, que adsorvem à interface das gotículas da emulsão. O objetivo desta dissertação foi produzir e caracterizar suspensões de celulose cristalina (CC), celulose amorfa (CA) e de partículas de quitosana (PQ) e avaliar seu potencial de aplicação como únicos compostos estabilizantes em emulsões óleo-em-água. As CC e CA foram produzidas por tratamentos térmico e ácido de celulose microcristalina, respectivamente, enquanto que as PQs foram produzidas por tratamento ácido de quitosana de média massa molecular. Em todos esses casos, os tratamentos foram seguidos de ultra-agitação: 0 (ST), 10000 (UT10), 15000 (UT15) ou 20000 rpm (UT20) por 3 minutos. As suspensões de CC, CA e PQ foram caracterizadas para determinação da distribuição do tamanho de partículas, do potencial zeta e da estabilidade física, e por microscopia eletrônica de varredura e/ou de força atômica. As partículas em pó, produzidas por liofilização, foram submetidas a análises de difração de raios-X, espectroscopia de infravermelho com Transformada de Fourier (FTIR) e de colorimetria instrumental. Em função dessas caracterizações, foi estudado o efeito do tipo de partícula estabilizadora (CC, CA ou PQ) sobre o tamanho de gotas, colorimetria instrumental e estabilidade física de emulsões com 20% (v/v) de óleo de soja, sem e com β-caroteno. Observou-se que os tratamentos UT10, UT15 e UT20 provocaram importantes alterações na distribuição de tamanho de partículas, com redução do tamanho médio das partículas, sem efeito significativo da velocidade de agitação. Em relação à PQ, os tratamentos por ultra-agitação não influenciaram o tamanho de partículas, nem quando comparado com suspensões ST. A CC apresentou-se em fragmentos de fibras celulósicas e altamente instáveis em suspensão, com índices de instabilidade próximos a 0,78. A CA apresentou-se em partículas coloidais e agregados irregulares, com estabilidade física razoável em suspensão (0,26). As suspensões de PQ apresentaram grandes estruturas cristalinas de acetato de sódio, junto a partículas coloidais de quitosana, mas altamente estáveis em suspensão aquosa (0,04). De forma geral, o potencial ζ e a estabilidade física das suspensões de CC, CA e PQ não variaram com o tratamento (ST, UT10, UT15 e UT20). Na caracterização das partículas liofilizadas, constatou-se alto índice de cristalinidade da CC (81%), e baixa cristalinidade da CA (42%) e da PQ (40%). Os tratamentos não provocaram modificações consideráveis na estrutura química, analisada por FTIR, e nem na cor instrumental da CC, CA e PQ. Por fim, apenas a PQ foi capaz de produzir e estabilizar emulsões óleo-em-água, não havendo formação de fase creme durante o armazenamento. A adição de 0,005% de β-caroteno à fase lipídica deixou as emulsões estabilizadas por PQ ligeiramente alaranjadas e aumentou sua estabilidade física, sem afetar o tamanho médio de suas gotas (29-32 µm). Portanto, apenas a PQ demonstrou potencial para estabilizar emulsões óleo-em-água, com ou sem β-caroteno.
Emulsions are systems formed when two immiscible components are mixed, presenting dispersed droplets in a continuous phase, stabilized by emulsifiers, amphiphilic compounds, with affinities for both phases of the system. In the case of Pickering emulsions, the system is stabilized by solid colloidal particles, which adsorb at the interface of the emulsion droplets. The objective of this dissertation was to produce and characterize suspensions of crystalline cellulose (CC), amorphous cellulose (CA) and chitosan particles (PQ) and to evaluate its potential as single stabilizing compounds in oil-in-water emulsions. CC and CA were produced by heat and acidic treatments of microcrystalline cellulose, respectively, whereas PQs were produced by acidic treatment of medium molecular weight chitosan, also followed by ultra-stirring treatment. In all cases, the treatments were followed by ultra-stirring: 0 (ST); 10,000 (UT10); 15,000 (UT15) or 20,000 rpm (UT20) for 3 minutes. The suspensions of CC, CA and PQ were characterized for determination of particle size distribution, zeta potential and physical stability, and by scanning electron microscopy and/or atomic force microscopy. The powder particles, produced by freeze-drying, were subjected to analysis by X-ray diffraction, Fourier Transform infrared spectroscopy (FTIR) and instrumental colorimetry. As a function of these characterizations, the effect of the stabilizing particle type (CC, CA or PQ) on droplet size, instrumental colorimetry and physical stability of emulsions with 20% (v/v) soybean oil, without and with β-carotene was studied. It was observed that the treatments UT10, UT15 and UT20 caused important changes in the particle size distribution, with reduction of the mean particle size, without significant effect of the agitation speed. Regarding chitosan particles, ultra-stirring treatments did not influence particle size, neither when compared to suspensions without pretreatment. CC was presented as highly unstable cellulosic fiber fragments in suspension, with instability indexes close to 0.78. CA was presented in colloidal particles and irregular aggregates, with reasonable physical stability in suspension (0.26). The suspensions of PQ showed large crystalline structures of sodium acetate, together with colloidal chitosan particles, but highly stable in aqueous suspension (0.04). In general, the potential ζ and the physical stability of CC, CA and PQ suspensions did not change with the treatment (ST, UT10, UT15 and UT20). In the characterization of the freezedried particles, a high crystallinity index of CC (81%) was observed, whereas CA (42%) and PQ (40%) showed low crystallinities. The treatments neither caused significant changes in the chemical structure, analyzed by FTIR, nor in the instrumental color of CC, CA and PQ. Finally, only PQ was able to produce and stabilize oil-in-water emulsions, with no cream phase formation during storage. Addition of 0.005% β-carotene to the oil phase left the emulsions stabilized by PQ slightly orange and increased the physical stability of the emulsions, without affecting the droplet size of the emulsions (29-32 µm). Therefore, only PQ demonstrated the potential to stabilize oil-in-water emulsions, with or without β-carotene.

Cette thèse porte sur la synthèse et l’étude expérimentale et numérique du comportement en suspension des particules de silice amphotères. Elle présente une étude approfondie de la synthèse de ces particules, avec une taille de patch ajustable, par la voie des émulsions de Pickering. Les particules de silice sont partiellement modifiées avec de l’aminopropyltriéthoxysilane (APTES), afin d’obtenir différentes charges de surface en fonction du pH (positive/ négative, neutre / négative ou négative/ négative). Les particules sont fluorescentes pour pouvoir être observées, ainsi que leurs assemblages, par microscopie confocale. Leur comportement à différents pH est également simulé par la dynamique Brownienne, où les interactions sont modélisées par le potentiel DLVO. Les simulations sont comparées aux observations expérimentales, afin de valider ces nouveaux modèles et de mieux comprendre le processus d’agrégation de particules à patch. Un bon accord entre les caractérisations expérimentales et numériques a été obtenu
This study is about the synthesis of amphoteric silica particles and the study of their behaviour in suspension, experimentally and numerically. It presents a thorough study for the synthesis of these particles, with adjustable patch size, using the Pickering emulsion method. Particles are partially modified with aminopropyltriethoxysilane (APTES), in order to obtain different surface charges depending on the pH (positive/negative, neutral/negative or negative/negative). These particles are fluorescent so that they can be observed, as well as their assemblies, by confocal microscopy. Their aggregation at different pH is also studied by means of Brownian dynamics simulations, using the DLVO theory. Simulations are compared to experimental observations, in order to validate these new models, and get a better understanding of the aggregation process of asymmetric particles. A good agreement between experimental and numerical characterizations was obtained

Les émulsions stabilisées par des particules minérales présentent des propriétés originales en raison du caractère « solide » des interfaces. La première partie du manuscrit décrit la fabrication d'émulsions monodisperses, de taille allant du micromètre au centimètre, via un mécanisme de croissance homogène (coalescence limitée). Ces émulsions modèles sont concentrées par centrifugation et l'on mesure la relation entre la pression osmotique et la fraction volumique des gouttes. Les résultats sont interprétés en considérant le caractère « solide » des interfaces (élasticité, plasticité) lié à la forte attraction latérale qui existe entre les particules adsorbées. Les propriétés de surface sont explorées indépendamment en mesurant la déformation de gouttes isolées soumises à un cisaillement contrôlé. Enfin, les propriétés rhéologiques des émulsions à interfaces « solides » sont comparées à celles des émulsions stabilisées par des tensioactifs, à interfaces « fluides ».

The stainless steel industry is an industry which manufactures one of the most used ma-terials in the world. Even though the vast size of the industry many might not reflect werethe steel comes from when buying their IKEAcutlery etc. But in fact this industry is moreintricate and complex than one might think.During the manufacturing process, the steelgoes through several processes. One of thoseprocesses is done by treating the steel withstrong acid. This chemical process is calledpickling. The pickling process is what createsthe characteristic smooth and shiny surface ofa product made in stainless steel.This thesis is about the development of a testunit that is able to effectively test the ASRA(Acid Sludge Removal Apparatus) filter cloths.The ASRA is a filtration system developed by Scanacon in Stockholm that filtrates and puri-fies acid that is used during the pickling pro-cess of a steel manufacture process. Today, it is complicated, time consuming and dangerous totest and evaluate different filter cloths in orderto find the cloth that provides the best result,since the tests has to be conducted on the realsystems. The aim of this thesis was therefore tosolve these problems. Scanacon wanted to findan alternative solution, that would not includeinteraction with the real filtration system. Theyalso wanted a portable and safe solution. To solve the problem a iterative design pro-cess called RDCD which stands for research, design, create & delivery was developed. Theprocesses was heavily influenced by the CDIO process (Conceive, Design, Implement & Ope-rate). After the research phase was conducted it was decided that a small filter analysis productwould be the best way to solve the problem. The product was then developed one com-ponent at a time. During the project several prototypes and test was created and conductedin order to validate the design.The result is a small filtration unit speciallydesigned to simulate the ASRA system. Theproduct is able to rapidly test various filtercloths in an easy way, without putting the user in harm’s way. After the tests has been perfor-med can the user can identify which cloth that worked the best. The product is small enoughto be possible to be carried in a hard case bag,which in turn affords portability.
Stålindustrin är en industri som tillverkar ettav de mest använda materialen i världen. Trotsindustrins enorma storlek är det kanske intemånga som reflekterar varifrån stålet kommerifrån när man köper exempelvis IKEA bestick.Men faktum är att den här industrin är mycketmer invecklad och komplex än vad man kan tro. Under tillverkningsprocessen går stålet ige-nom flera processer. En av de här processerna genomförs genom att behandla stålet med starksyra. Den kemiska processen kallas för betningoch är det som ger en produkt tillverkad i stålden karaktäristiska lena och glänsande ytan. Den här examensrapporten handlar om ut-vecklandet av en test enhet som effektivt kan testa filter dukarna till ASRA (Acid SludgeRemoval Apparatus) systemet. ASRA systemetär ett filtreringssystem utvecklat av Scanaconi Stockholm som filtrerar och renar syran som används under betningsprocessen vid stål-tillverkning. Idag är det komplicerat, tidskrä-vande och farligt att testa och utvärdera olika filterdukar för att ta reda på vilken duk somger bäst resultat, eftersom att testerna måstegenomföras på de riktiga systemen. Målet fördet här examensarbetet var därför att lösa dehär problemen. Scanacon ville ha en alternativlösning som inte kräver interaktion med deriktiga systemen. De ville också ha en portabeloch säker lösning. För att lösa problemet utvecklades en itera-tiv designprocess kallad RDCD som står för research, design, create & delivery. Processen var tungt influerat av CDIO (Conceive, De-sign, Implement & Operate) processen. Efter att researchfasen var genomförd bestämdesdet att en liten filteranalysatorprodukt var detbästa sättet att lösa problemet på. Produktenutvecklades sedan en komponent i taget. Underprojektets gång har flera prototyper byggts och flera tester genomförts för att validera designen. Resultatet är en liten filtreringsenhet som är specialdesignad för att simulera ASRA syste-met. Produkten kan snabbt testa oliak filterdu-kar på ett enkelt sätt, utan utsätta användaren för fara. Efter att testerna genomförts kananvändaren identifiera vilken duk som funkatbäst. Produkten är tillräckligt liten för att fåplats i en hårdplast väska, vilket ger produktenden efterfrågade portabiliteten.

L'élaboration de matériaux polymères à la fois fonctionnels et résistants est une problématique récurrente au développement de supports particulaires utilisables en conditions extrêmes. L'augmentation de leur taux de réticulation et de leur surface spécifique constitue généralement la solution pour allier résistance et accessibilité des fonctions. Récemment, une technique de synthèse de particules à taux de réticulation élevé et morphologie contrôlée, fondée sur la précipitation contrôlée de microgels à base de divinylbenzène dans l'acétonitrile, a été développée. Les travaux entrepris au cours de cette thèse avaient pour objectif d'utiliser et de jauger cette nouvelle voie de polymérisation pour l'élaboration de particules réticulées, de fonctionnalité et de taille contrôlées, destinées à être utilisées comme supports polymères. Dans un premier temps, la synthèse par précipitation de particules fonctionnalisées au moyen de motifs anthraquinone est décrite. Ces dernières ont été testées en tant que catalyseur pour cuisson pepetière Kraft, leur efficacité et leur recyclabilité ont été mises en évidence. Cette partie est complétée, dans le chapitre trois, par l'étude de leurs propriétés éléctrochimiques par voltampérométrie cyclique, propriétés mises à profit pour la catalyse de l' électroréduction de l'oxygène. Le quatrième chapitre est consacré à l'applicabilité des particules, obtenues par précipitation, comme supports pour chromatographie liquide haute performance. L'étude de leur pouvoir séparateur et les voies de synthèse pour l'obtention de phases stationnaires chirales y sont présentées. Par ailleurs, ces particules ont révélé des propriétés aux interfaces originales, permettant leur utilisation pour la synthèse de cristaux photoniques et la stabilisation d'émulsions de Pickering sensibles au pH, examinées dans le dernier chapitre

Nous décrivons dans ce travail l'élaboration de latex nanocomposites à base d'oxyde de cérium en vue d'applications dans le domaine des revêtements. Deux procédés originaux ont été développés afin de contrôler la morphologie des particules. Dans un premier temps, nous avons tiré parti de la forte densité de charges des nanoparticules d'oxyde de cérium pour stabiliser des particules de latex obtenues par polymérisation en émulsion ou en miniémulsion " de Pickering ". Dans les deux cas, la réaction est conduite en présence des particules inorganiques et d'un agent complexant à caractère acide, l'acide méthacrylique, en l'absence de tout tensioactif. Des particules de latex, décorées en surface par les nanoparticules d'oxyde de cérium ont été ainsi synthétisées. Par la suite, une stratégie qui consiste à utiliser des chaînes de polymères hydrophiles, réactivables (macro-agent RAFT) et préalablement adsorbées à la surface des nanoparticules d'oxyde de cérium a été envisagée. Ces chaînes polymères comportant à la fois des fonctions carboxyliques et un groupe trithiocarbonate terminal sont capables de stabiliser la suspension colloïdale des nanoparticules et de réamorcer la polymérisation en mode semi-continu permettant ainsi l'encapsulation de l'oxyde de cérium. Une optimisation visant à utiliser un procédé batch a également été évaluée. Quelle que soit la stratégie employée, une attention toute particulière a été portée à la stabilité colloïdale du milieu ainsi qu'à la cinétique de la réaction. La morphologie des particules composites a été caractérisée par MET et cryo-MET et reliée aux conditions de modification de surface et de polymérisation

碩士
元智大學
工業工程與管理學系
97
The order picking is one of the important and complex operations in the distribution center. The order picking time accounts for 30%~40% of total operation time in distribution center. Hence, a well planned order picking strategy can reduce the operating cost of the distribution center effectively. In this study, the optimal order picking strategies were evaluated. We used two order batching methods (Random Batching and Least Aisle Batching) combined with two route planning methods (Traversal Strategy and Largest Gap Strategy) to determine the initial solutions. Then, we used Particle Swarm Optimization (PSO) to improve the initial solution and then tried to achieve the optimum solution. Finally, we utilized the MINITAB statistical software to test t the relationships among initial solutions, order picking strategies and the load limit of the picking cart. The results showed that the initial solutions had no statistical significance on the order picking distance. While order picking strategies and load limit had more influence on the order picking distance. We also found that the largest gap strategy had best performance in these simulation test problems.

碩士
國立臺灣科技大學
工業管理系
101
Order picking operation plays a very important role in warehousing. There have been some researches discussing how to save the picking time and reduce the idle time in picking operation. If two items appears in the same order simultaneously, then assigning them to two different picking zones can reduce the picking time for a synchronized zone order picking system. Thus, a simple way to measure the similarity between two items is to measure the co-appearance of two items in the same order. Therefore, this study attempts to apply genetic algorithm and particle swarm optimization algorithm to assign items to storage zones based on items’ similarities for shortening the picking time. Three different size problems are employed to testify algorithms’ performance. Computational results indicate that PSO algorithm outperforms GA and existing algorithm in terms of picking time.

Die vorliegende Arbeit beschreibt Herstellungsmöglichkeiten für sogenannte Saturn-Partikel. Es handelt sich dabei um Partikel, die auf ihrer Oberfläche drei Bereiche mit unterschiedlichen Eigenschaften aufweisen. Zwei Kappen mit gleichen Eigenschaften sind durch einen Gürtel getrennt, der sich stark von den Kappen unterscheidet. Im Speziellen geht es hier um die unterschiedliche Benetzbarkeit der Bereiche. Die Herstellung von Saturn-Partikeln mit einem hohen Benetzungskontrast wurde auf zwei verschiedenen Wegen realisiert. Als Ausgangspunkt dienten Mikroglaskugeln, die zunächst zur Hydrophobierung ihrer Oberfläche mit einem Silan behandelt wurden. Eine Art der Saturn-Partikel wurde durch das Ätzen eines Gürtels rund um die Partikel mit Flusssäure in einer im Rahmen dieser Arbeit entwickelten Spülzelle erzeugt. Auf diese Weise konnten Partikel mit zwei hydrophoben Kappen und einem hydrophilen Gürtel erhalten werden. Eine weitere Art dieser Partikel wurde durch das Abschleifen der Partikelkappen nach vorheriger Einbettung in Polymerfilme erhalten, wodurch die hydrophobe Beschichtung abgetragen und das ursprünglich hydrophile Glas freigelegt wurde. Die so erhaltenen Partikel wiesen zwei parallele, hydrophile Bereiche auf, die durch einen hydrophoben Gürtel voneinander getrennt waren. Es wird gezeigt, dass Saturn-Partikel in Systemen mit Wasser und Öl beim Mischen von unterschiedlichen Anteilen der drei Phasen durch Selbstorganisationsprozesse verschiedene Strukturen wie Ketten oder Schichten ausbilden können. Des Weiteren sind sie in der Lage in einem System mit Wasser und Luft besondere Schäume auszubilden, die eine sehr hohe Stabilität aufweisen. Die Partikel stabilisieren darin Flüssigkeitsfilme zwischen den Luftblasen, wobei der hydrophile Gürtel im Wasserfilm und die hydrophoben Kappen in der Luft liegen.

碩士
國立臺北科技大學
資源工程研究所
101
The aim of this study is the preparation of Janus particles by Pickering emulsion. The Janus particle contains silicon dioxide as a core layer and the zinc oxide as a shell layer. Comparing with traditional “Microfluidic methods” , Janus particles with uniform size can be prepared with this method. Since the silicon dioxide is hydrophilic, it is difficult to control the area of each sides of the Janus particles. By Pickering emulsion , it is possible to control the structure of Janus particle. In this study, we used cationic surfactant DDAB to modify the silica surface. By this surface modification, one can control the contact angle between particles and wax phase. Then, we synthesize a ZnO shell structure on SiO2 core by liquid-phase precipitation method. After removing wax by THF, Janus particle with silicon dioxide as a core layer and the zinc oxide as a shell layer can be prepared.The Janus particles were characterized by SEM, EDS and XRD. Experiment results show that, increasing the amount of the absorbed , the particle became more hydrophobic. The W/O ratio has significant effect on the stability of emulsion suspension. Increasing the amount of the oil phase will destabilize emulsion suspension. The SEM imagine showed that the Janus particles consist of one side covered with ZnO nanoparticles while the other side of particle was silica. The XRD and EDS imagine also show that the ZnO is of crystalline structure. Comparing with traditional method, this study demonstrated that Janus particles with controllable morphology can be prepared.

碩士
南臺科技大學
化學工程與材枓工程系
105
PS/SiO2, PS/CNTs, PS/SiO2/CNTs composte microspheres were prepared by Pickering emulsion polymerization in the present paper.The effects of addition of CNTs and SiO2 on the particle size , conductivity and Zate potential.The results of microscope and DLS dynamic analysis,The SiO2 inorganic nanoparticles were coated on the surface of composite microspheres . The microstructures of PS/CNTs-COOH composite microspheres prepared by CNTs-COOH were observed by SEM,The surface of the microspheres was uniformly coated with CNTs, and the conductivity was increased with the addition of carbon nanotubes The amount increased from 7.1x10-3 S/cm to 9.4x10-2 S/cm. Addition of SiO2 and CNTs-COOH prepared PS/SiO2/CNTs　composite microspheres, TEM and SEM analysis be observed on the surface with SiO2, CNTs, the conductivity of the composite particles with the outer layer of carbon tube increases, 9.2x10-4 S/cm up to 8.1x10-3 S/cm. Finally hollow SiO2/CNTs composite particles can be prepared by removing PS/SiO2/CNTs polymer by sintering or solvent extraction.

Many materials and biological systems in nature are suspensions composed of disks, such as clay, asphaltenes, and red blood cells. Despite their natural abundance and wide industrial application, disks are least studied compared to spheres and rods, due to the lack of model systems. In our research, disks at micro-scale were mass-produced with unprecedented uniformity in size and shape, and unique flexibility in the control of lateral size, lateral size polydispersity, shape, and aspect ratio (ξ = diameter/thickness). This dissertation focuses on two main areas: the study of the discotic colloidal liquid crystal phase transitions and the application of disk-like colloidal systems as Pickering emulsion and Pickering foam stabilizers. First, we engineered two discotic colloidal systems made from organic and inorganic materials. The former is made of α-eicosene, which is an alkene of 20 carbons. The latter is composed of nano-sheets from exfoliated zirconium phosphate (α-ZrP). Both discotic systems were used to experimentally investigate the liquid crystalline phase transitions (Isotropic-Nematic, Isotropic-Cubic and Isotropic-Columnar). Also, the nematic crystalline phase was studied in detail by embedding it in a translucent and thermo-sensitive hydrogel. This was possible since nematic textures could be formed instantly by ZrP nano-sheets due to their high diameter-thickness ratio. Second, we developed Pickering emulsions and Pickering foams stabilized by high-aspect-ratio nano-sheets. We have also demonstrated for the first time the fabrication of the thinnest amphiphilic Janus and Gemini nano-sheets, which are either surface- or edge-modified plates with a thickness at atomic scale. These nano-sheets were obtained by exfoliating α-ZrP crystals grafted with a coupling agent of hydrophobic molecules on their edges and outer surfaces. Extending this work, we studied crucial fundamental mechanisms that allow Pickering interfacial stabilization, including the effect on the adsorption properties of particle aspect ratio, concentration, and hydrophobicity. Our study is of great interest in the scientific community due to the difficulty in generating a discotic colloidal system of controllable parameters.

abstract: Ionic liquids (ILs), or low-temperature liquid salts, are a class of materials with unique and useful properties. Made up entirely of ions, ILs are remarkably tunable and diverse as cations and anions can be mixed and matched to yield desired properties. Because of this, IL/water systems range widely—from homogeneous mixtures to multiphasic systems featuring ionic liquid/liquid interfaces. Even more diversity is added when particles are introduced to these systems, as hard particles or soft-matter microgels interact with both ILs and water in complex ways. This work examines both miscible ionic liquid/water mixture and two-phase, immiscible ionic liquid/water systems. Extensive molecular dynamics (MD) simulations are utilized in conjunction with physical measurements to inform theoretical understanding of the nature of these systems, and this theoretical understanding is related to practical applications—in particular, the development of a low-temperature liquid electrolyte for use in molecular electronic transducer (MET) seismometers, and particle self-assembly and transport at ionic liquid/liquid interfaces such as those in Pickering emulsions. The homogenous mixture of 1-butyl-3-methylimidazolium iodide and water is examined extensively through MD as well as physical characterization of properties. Molecular ordering within the liquid mixture is related to macroscopic properties. These mixtures are then used as the basis of an electrolyte with unusual characteristics, specifically a wide liquid temperature range with an extremely low lower bound combined with relatively low viscosity allowing excellent performance in the MET sensor. Electrolyte performance is further improved by the addition of fullerene nanoparticles, which dramatically increase device sensitivity. The reasons behind this effect are explored by testing the effect of graphene surface size and through MD simulations of fullerene and a silica nanoparticle (for contrast) in [BMIM][I]/water mixtures. Immiscible ionic liquid/water systems are explored through MD studies of particles at IL/water interfaces. By increasing the concentration of hydrophobic nanoparticles at the IL/water interface, one study discovers the formation of a commingled IL/water/particle pseudo-phase, and relates this discovery to previously-observed unique behaviors of these interfaces, particularly spontaneous particle transport across the interface. The other study demonstrates that IL hydrophobicity can influence the deformation of thermo-responsive soft particles at the liquid/liquid interface.
Dissertation/Thesis
Doctoral Dissertation Chemical Engineering 2016

abstract: Polymer-gold composite particles are of tremendous research interests. Contributed by their unique structures, these particles demonstrate superior properties for optical, catalytic and electrical applications. Moreover, the incorporation of “smart” polymers into polymer-gold composite particles enables the composite particles synergistically respond to environment-stimuli like temperature, pH and light with promising applications in multiple areas. A novel Pickering emulsion polymerization route is found for synthesis of core-shell structured polymer-gold composite particles. It is found that the surface coverage of gold nanoparticles (AuNP) on a polystyrene core is influenced by gold nanoparticle concentration and hydrophobicity. More importantly, the absorption wavelength of polystyrene-gold composite particles is tunable by adjusting AuNP interparticle distance. Further, core-shell structured polystyrene-gold composite particles demonstrate excellent catalyst recyclability. Asymmetric polystyrene-gold composite particles are successfully synthesized via seeded emulsion polymerization, where AuNPs serve as seeds, allowing the growth of styrene monomers/oligomers on them. These particles also demonstrate excellent catalyst recyclability. Further, monomers of “smart” polymers, poly (N-isopropylacrylamide) (PNIPAm), are successfully copolymerized into asymmetric composite particles, enabling these particles’ thermo-responsiveness with significant size variation around lower critical solution temperature (LCST) of 31°C. The significant size variation gives rise to switchable scattering intensity property, demonstrating potential applications in intensity-based optical sensing. Multipetal and dumbbell structured gold-polystyrene composite particles are also successfully synthesized via seeded emulsion polymerization. It is intriguing to observe that by controlling reaction time and AuNP size, tetrapetal-structured, tripetal-structured and dumbbell-structured gold-polystyrene are obtained. Further, “smart” PNIPAm polymers are successfully copolymerized into dumbbell-shaped particles, showing significant size variation around LCST. Self-modulated catalytic activity around LCST is achieved for these particles. It is hypothesized that above LCST, the significant shrinkage of particles limits diffusion of reaction molecules to the surface of AuNPs, giving a reduced catalytic activity. Finally, carbon black (CB) particles are successfully employed for synthesis of core- shell PNIPAm/polystyrene-CB particles. The thermo-responsive absorption characteristics of PNIPAm/polystyrene-CB particles enable them potentially suitable to serve as “smart” nanofluids with self-controlled temperature. Compared to AuNPs, CB particles provide desirable performance here, because they show no plasmon resonance in visible wavelength range, whereas AuNPs’ absorption in the visible wavelength range is undesirable.
Dissertation/Thesis
Doctoral Dissertation Chemical Engineering 2015

Content on CD can be found with print thesis held at Turitea library, Palmerston North. Content: Chapter 8 Appendix 8.1. PLC Code 8.2. Mean-Shift Code 8.3. Webcam Interface HTML Code 8.4. PIC18F4520
In the rapid development of flexible automation and the broad application of computer technology, industrial monitor software has played an integral role in all kinds of industrial areas. It allows operators to monitor and control a plant in real-time with feedback from any number of processes. Traditionally industrial monitor software exhibits low efficiency, lack of reliability, non-reconfigurable and does not support multi-communication protocols, as is required for the exchange of data from outside of the factory. (Fan, 2006) Configuration software is basically type of the industrial automation and process monitor and control application. It supports Human Machine Interface (HMI), Supervisory Control and Data Acquisition (SCADA) system, realizes interlink between low level device and upper management network. Nowadays, with the advent of Configuration Software, engineers can readily construct field control systems with minimal developmental time and cost while allowing the combination of a plethora of user requests and control. The primary objective of this thesis is to develop a web base application with surveillance ability to realize remote control of an ABB IRB 340 Flexpicker robot through Siemens Programmable Logic Controller (PLC) system. The communication between the application and robot system is to be built using configuration software to link a number of third party devices through the inclusion of OLE for Process Control (OPC) techniques, graphical design editors, web navigators, and tag management. The thesis also introduces a vision system with trig-board design for object recognition and tracking.