Relevant bibliographies by topics / Parameter K(t)

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers

Academic literature on the topic 'Parameter K(t)'

Author: Grafiati
Published: 28 June 2021
Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Parameter K(t).'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Parameter K(t)"

1

Petzschner, Frederike H., Irene P. Ponce, Martin Blaimer, Peter M. Jakob, and Felix A. Breuer. "Fast MR parameter mapping using k-t principal component analysis." Magnetic Resonance in Medicine 66, no. 3 (March 9, 2011): 706–16. http://dx.doi.org/10.1002/mrm.22826.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Chuan-Hui, N., and S. Xiao-Bao. "Grüneisen parameter of lithium, sodium and potassium at T=298 K." Journal of Physics and Chemistry of Solids 62, no. 7 (July 2001): 1359–61. http://dx.doi.org/10.1016/s0022-3697(01)00007-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Deshmukh, Mangesh R., Ganesh M. Bansode, and Pallavi Mahajan. "EVALUATION OF POTATO CULTIVAR FOR GROWTH AND YIELD PARAMETER." World Journal of Biology and Biotechnology 3, no. 1 (April 15, 2018): 203. http://dx.doi.org/10.33865/wjb.003.01.0138.

Full text
Abstract:
The present investigation on evaluation of varietal performance of various potato varieties under Pune Conditions was initiated in Oct 2012. Potato tubers of Kufri Lauvkar, Kufri Badshah, Kufri Pushkar, Kufri Surya, Kufri Khyati, Kufri Ashoka, Kufri Jyoti, Kufri Pukharaj were planted on ridges and furrows. The results revealed that Kufri Surya recorded significantly higher total tuber yield (20.67 t/ha) followed by Kufri Pukharaj (18.45 t/ha). However percent plant emergence and foliage senescence were found non-significant. Whereas results in respect of yield depicted that the variety Kufri Lauvkar produced the lowest tuber yield of 16.23 t/ha. Tuber dry matter (19.69%) was recorded to be the highest in Kufri Surya which was significantly superior in comparison to the remaining varieties. The least incidence of late blight (9.69%) was recorded on Kufri Khyati which was at par with K. Surya (9.74%). The least incidence of early blight (10.29%) was recorded on K. Lauvkar which too was at par with K. Surya. Keeping this in view K. Surya may be recommended as promising variety for Pune region
APA, Harvard, Vancouver, ISO, and other styles
4

Mukherjee, Somnath. "Some Studies on K-essence Lagrangian." International Journal of Innovative Research in Physics 2, no. 2 (January 1, 2021): 9–14. http://dx.doi.org/10.15864/ijiip.2202.

Full text
Abstract:
K-essence Lagrangian is studied in the context of an early universe epoch when t → 0. Equation of state parameter ω < −1 as well as deceleration parameter q0 < −1, indicates an accelerated expansion of the universe at an early epoch of time driven by negative pressure generated by dark energy.
APA, Harvard, Vancouver, ISO, and other styles
5

Kristoffel, N., and T. Örd. "The Pseudogap and Superconductivity Order Parameter Fluctuations." International Journal of Modern Physics B 12, no. 29n31 (December 20, 1998): 3106–9. http://dx.doi.org/10.1142/s0217979298002155.

Full text
Abstract:
The influence of superconductivity unequilibrium order parameter correlated fluctuations on the normal phase elementary excitations have been investigated. Correspondingly a fluctuating source of pairs appears in the effective Hamiltonian described using the Gaussian free energy functional. A pseudogap (E g ) is found on the Fermi surface decreasing with rising temperature. It is scaled with the parameter α = ∊ F /k B T c . For smaller α-s E g develops more over T c . In non-high-T c systems and overdoped high-T c compounds the pseudogap is suppressed.
APA, Harvard, Vancouver, ISO, and other styles
6

Ludwig, Donald. "Estimation Techniques for Distributed Parameter Systems (H. T. Banks and K. Kunisch)." SIAM Review 33, no. 3 (September 1991): 486–87. http://dx.doi.org/10.1137/1033115.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Ye, Wen Ming, Xu Teng Hu, Wan Lin Guo, and Ying Dong Song. "Three Dimensional Criterion for Creep Crack Propagation in C(T) Specimen." Applied Mechanics and Materials 853 (September 2016): 142–47. http://dx.doi.org/10.4028/www.scientific.net/amm.853.142.

Full text
Abstract:
Experimental of two kinds of compact tension (CT) specimens’ creep crack propagation are carried out in this paper. Traditional fracture mechanics and three-dimensional fracture theory are compared and the results show that: The K-Tz two-parameter model can eliminate the thickness-effect on the crack growth rates in the relatively low K range, however when K exceed certain values the effect of thickness for crack growth rates still exists; The Ct and Ct-Tz model can describe the thickness-effect of creep crack growth rates in regions of high Ct; When the crack tip stress intensity factor K of the two kinds of thickness (B=5 mm, B=10 mm) specimens equal to 35 and 31 respectively, this material’s creep crack growth control parameter change from K to Ct.
APA, Harvard, Vancouver, ISO, and other styles
8

Tseng, Jimmy. "Eisenstein series and an asymptotic for the K-Bessel function." Ramanujan Journal 56, no. 1 (April 8, 2021): 323–45. http://dx.doi.org/10.1007/s11139-020-00358-8.

Full text
Abstract:
AbstractWe produce an estimate for the K-Bessel function $$K_{r + i t}(y)$$ K r + i t ( y ) with positive, real argument y and of large complex order $$r+it$$ r + i t where r is bounded and $$t = y \sin \theta $$ t = y sin θ for a fixed parameter $$0\le \theta \le \pi /2$$ 0 ≤ θ ≤ π / 2 or $$t= y \cosh \mu $$ t = y cosh μ for a fixed parameter $$\mu >0$$ μ > 0 . In particular, we compute the dominant term of the asymptotic expansion of $$K_{r + i t}(y)$$ K r + i t ( y ) as $$y \rightarrow \infty $$ y → ∞ . When t and y are close (or equal), we also give a uniform estimate. As an application of these estimates, we give bounds on the weight-zero (real-analytic) Eisenstein series $$E_0^{(j)}(z, r+it)$$ E 0 ( j ) ( z , r + i t ) for each inequivalent cusp $$\kappa _j$$ κ j when $$1/2 \le r \le 3/2$$ 1 / 2 ≤ r ≤ 3 / 2 .
APA, Harvard, Vancouver, ISO, and other styles
9

Li, Guo, Li Li, and Peng Zhu. "Galloping Control for Iced Conductors Using Tuned Mass Dampers with Fixed Time-Delayed Feedback." Shock and Vibration 2019 (February 27, 2019): 1–9. http://dx.doi.org/10.1155/2019/4823457.

Full text
Abstract:
A tuned mass damper with fixed time-delay feedbacks (TTMD) is first applied to suppress galloping of iced conductors. It is different from general time-delay feedback control, which also connects an added mass to a galloping body and can absorb vibrational energy. The two-degrees-of-freedom model captures the essential mechanical behaviors of iced conductors with TTMD undergoing galloping. The harmonic balance method is then employed to obtain the approximate analytical solutions of the system. Particularly, the expressions of galloping amplitude and angle frequency were obtained. Then the influence regulations of the time-delay parameter T and strength parameter K on galloping control are fully analysed. The results show the added fixed time-delay feedback control can promote the TTMD’s effect, when suitable time-delay parameter T and strength parameter K are chosen. Moreover, the response amplitude and natural frequency change periodically with time-delay parameter T. With strength parameter K increasing, the response amplitude increases or decreases for a fixed value of T and the TTMD’s effect can be enhanced.
APA, Harvard, Vancouver, ISO, and other styles
10

Betego´n, C., and J. W. Hancock. "Two-Parameter Characterization of Elastic-Plastic Crack-Tip Fields." Journal of Applied Mechanics 58, no. 1 (March 1, 1991): 104–10. http://dx.doi.org/10.1115/1.2897135.

Full text
Abstract:
Plane-strain elastic-plastic crack-tip fields have been modeled with modified boundary layer formulations based on the first two terms K and T, of the elastic field. These formulations match the appropriate full field solutions. Compressive T stresses reduce the stresses by an amount which is independent of radial distance, corresponding to the introduction of a second term in addition to the dominant plastic singularity. Geometries which maintain J-dominance are characterized by zero or positive T stresses, while geometries with negative T stresses can be described by a two-parameter characterization using J and T into full plasticity.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Parameter K(t)"

1

Kokeš, Miroslav. "Porovnání metod pro identifikaci poruch valivých ložisek." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2021. http://www.nusl.cz/ntk/nusl-442447.

Full text
Abstract:
The aim of this master thesis is the comparison of selected methods and parameters for roller bearings diagnostics. Selected statistical parameters are kurtosis, crest factor, and parameter K(t). The other selected methods are envelope analysis, cepstral analysis, and ACEP method. These methods are implemented in LabVIEW software and compared based on noise resistance, computation speed, and overall capability of identifying roller bearing faults.
APA, Harvard, Vancouver, ISO, and other styles
2

Schmidt, Sarah J., Erika L. Wagoner, Jennifer A. Johnson, James R. A. Davenport, Keivan G. Stassun, Diogo Souto, and Jian Ge. "Examining the relationships between colour, T eff , and [M/H] for APOGEE K and M dwarfs." OXFORD UNIV PRESS, 2016. http://hdl.handle.net/10150/621724.

Full text
Abstract:
We present the effective temperatures (T-eff), metallicities, and colours in Sloan Digital Sky Survey (SDSS), Two Micron All Sky Survey, and Wide-field Infrared Survey Explorer filters, of a sample of 3834 late-K and early-M dwarfs selected from the SDSS Apache Point Observatory Galactic Evolution Experiment (APOGEE) spectroscopic survey ASPCAP (APOGEE Stellar Parameters and Chemical Abundances Pipeline) catalogue. We confirm that ASPCAP T-eff values between 3550 < T-eff < 4200 K are accurate to similar to 100 K compared to interferometric T-eff values. In that same T-eff range, ASPCAP metallicities are accurate to 0.18 dex between -1.0 <[M/H]< 0.2. For these cool dwarfs, nearly every colour is sensitive to both T-eff and metallicity. Notably, we find that g - r is not a good indicator of metallicity for near-solar metallicity early-M dwarfs. We confirm that J - K-S colour is strongly dependent on metallicity, and find that W1 - W2 colour is a promising metallicity indicator. Comparison of the late-K and early-M dwarf colours, metallicities, and T-eff to those from three different model grids shows reasonable agreement in r - z and J - K-S colours, but poor agreement in u - g, g - r, and W1 - W2. Comparison of the metallicities of the KM dwarf sample to those from previous colour-metallicity relations reveals a lack of consensus in photometric metallicity indicators for late-K and early-M dwarfs. We also present empirical relations for T-eff as a function of r - z colour combined with either [M/H] or W1 - W2 colour, and for [M/H] as a function of r - z and W1 - W2 colour. These relations yield T-eff to similar to 100 K and [M/H] to similar to 0.18 dex precision with colours alone, for T-eff in the range of 3550-4200 K and [M/H] in the range of -0.5-0.2.
APA, Harvard, Vancouver, ISO, and other styles
3

Alt, Hans-Marian Rücker Thomas Wabbel Thomas. "Ableitung von Regeln zur Optimierung der PAC-Parameter z, k und t in mehrstufigen PAC-gesteuerten Produktionssystemen mit einem und mehreren Endprodukten /." 2005. http://www.gbv.de/dms/ilmenau/abs/509129633alt.txt.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Parameter K(t)"

1

Kachelriess, Michael. Cosmological models for an homogeneous, isotropic universe. Oxford University Press, 2018. http://dx.doi.org/10.1093/oso/9780198802877.003.0020.

Full text
Abstract:
The universe is homogeneous and isotropic on sufficiently large scales. The metric which describes such a space-time is derived and it is shown that it is determined by the scale factor a(t) and the parameter k distinguishing between hyperbolic, flat, or spherical 3-spaces. The Friedmann equations, which describe the time evolution of these models, are derived and specific models are discussed.
APA, Harvard, Vancouver, ISO, and other styles
2

Ryazantsev, Sergey, Tamara Rostovskaya, Olga Vorobyeva, Alexander Zubko, Mehdi Afzali, and Timur Miryazov. Аtlas of socio-demographic development of Russia and Iran / S. V. Ryazantsev, T. K. Rostovskaya, O. D. Vorobyeva [et al.]; FCTAS RAS. – M.: Perspectiva Publishing, 2020. – 136 p. Perspectiva Publishing, 2020. http://dx.doi.org/10.38085/978-5-905-790-46-1-2020-1-136.

Full text
Abstract:
The Atlas of the Socio-Demographic Development of Russia and Iran is a comprehensive scientific and practical publication that presents a cartographic model of cross-country comparisons of the socio-demographic development of the states. The model helps to obtain information about the main parameters of the socio-demographic situation in comparison with similar indicators, as well as to analyze the main trends of the socio-demographic development of the state and society. The Atlas is addressed to scientists, civil servants, social workers, teachers, graduate students, students (demographers, sociologists, political scientists, economists), as well as anyone interested in the socio-demographic development of Russia and Iran. The Atlas was prepared within the framework of the federal target program «Research and Development in Priority Areas of Development of the Scientific and Technological Complex of Russia for 2014–2020», approved by the Decree of the Government of the Russian Federation on May 21, 2013 No. 426, to the I Russian-Iranian sociological forum (Moscow, November 16–18, 2020).
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Parameter K(t)"

1

Wang, Sujing, Na Zhang, Mingfang Sun, and Chunguang Zhou. "The Analysis of Parameters t and k of LPP on Several Famous Face Databases." In Lecture Notes in Computer Science, 333–39. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-21524-7_40.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Gräfe, Wolfgang. "The Separation of the Semi-infinite Model and the Calculation of the Surface Parameters for the Three-Dimensional body at T = 0 K (Regula Falsi of Surface Theory)." In Quantum Mechanical Models of Metal Surfaces and Nanoparticles, 25–34. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-19764-7_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

"Script-, Function-Files and Program Managing." In Advances in Systems Analysis, Software Engineering, and High Performance Computing, 67–91. IGI Global, 2021. http://dx.doi.org/10.4018/978-1-7998-7078-4.ch003.

Full text
Abstract:
The Editor window for writing scripts and user-defined functions are presented, as well as the Live Editor window for writing live scripts and functions. All commands, regular and live scripts, and functions are explained by examples from the mechanics and tribology (M&T) fields. After that, the application examples are given; they include the stress unit converters, computing of the stress factor of a shaft with a transverse hole, gear warm K-parameter calculations, installation, and operation stresses on the piston ring.
APA, Harvard, Vancouver, ISO, and other styles
4

"Muskellunge Management: Fifty Years of Cooperation Among Anglers, Scientists, and Fisheries Biologists." In Muskellunge Management: Fifty Years of Cooperation Among Anglers, Scientists, and Fisheries Biologists, edited by Neil P. Rude, David C. Glover, William D. Hintz, Shawn C. Hirsrst, Wayne E. Herndon, Rob B. Hilsabeck, and Gregory W. Whitledge. American Fisheries Society, 2017. http://dx.doi.org/10.47886/9781934874462.ch45.

Full text
Abstract:
<em>Abstract</em>.—Accurate estimates of growth and mortality are important for management of recreational fisheries. Accurate age estimates often require the sacrifice of fish; thus, assessments of growth and mortality rates of trophy fishes such as Muskellunge <em>Esox masquinongy </em>often lack sufficient data. Mark–recapture history can be used as a nonlethal alternative to estimate growth and mortality in fishes. To determine the utility of this approach, we used data from a 17-year Muskellunge mark–recapture program conducted on two Illinois reservoirs (Kinkaid Lake and North Spring Lake). Von Bertalanffy parameter estimates by sex, lake, and tag type (passive integrated transponder and T-bar anchor tags) were obtained using a novel modification of the Fabens growth model and compared to von Bertalanffy growth estimates using known- or scale-aged fish. Mortality was calculated using both age- and length-based methods. Fabens growth model estimates of asymptotic length (<em>L</em><sub>∞</sub>) and growth coefficient (<EM>K</EM>) were within 6% (≤62 mm) and 23% (≤0.11) of corresponding von Bertalanffy growth model parameter estimates from known- or scale-aged fish by lake and sex. Provided that all sizes of fish are sampled, 4 years of mark–recapture data with more than 100 recaptures were found to be sufficient to produce reliable parameter estimates. Growth parameters differed between male fish tagged with passive integrated transponder or T-bar anchor tags but did not differ by tag type for females. Differences in Muskellunge growth and mortality rates between the two study lakes suggest that changing from a regionally applied minimum length limit to lake-specific minimum length limits may be warranted. Our results highlight the feasibility of mark–recapture data as a nonlethal technique to estimate population-specific growth and mortality rates for Muskellunge and the potential value of this approach in facilitating lake-specific Muskellunge management.
APA, Harvard, Vancouver, ISO, and other styles
5

"Black Bass Diversity: Multidisciplinary Science for Conservation." In Black Bass Diversity: Multidisciplinary Science for Conservation, edited by Travis R. Ingram and John M. Kilpatrick. American Fisheries Society, 2015. http://dx.doi.org/10.47886/9781934874400.ch15.

Full text
Abstract:
<em>Abstract</em>.—The largest native population of Shoal Bass <em>Micropterus cataractae</em> inhabits the Flint River, Georgia and remains relatively unstudied. We examined demographic characteristics of the population in the lower Flint River that is bounded by reservoirs during 2009–2011. We anchor tagged 741 Shoal Bass to evaluate the percentage of caught fish that were harvested. Shoal bass (<em>n</em> = 187) were sacrificed for age and growth analysis. Ages of sampled fish ranged from age 1 to 11. Von Bertalanffy growth parameter estimates were <EM>L</EM><sub>∞</sub> = 564 mm, <EM>K</EM> = 0.312, and<em> t</em><sub>0</sub> = –0.089. Male and female growth rates were similar, with the mean Shoal Bass requiring 2.4 years to reach 305 mm and 5.1 years to reach 457 mm. Growth rates of Shoal Bass were greater than those of previously studied populations and Largemouth Bass <em>M. salmoides</em> in the Flint River and an impoundment bounding the upper end of the study site. Annual total pooled mortality was 49%. Forty-one percent of caught Shoal Bass were harvested by anglers (range 31–60%). Our results suggest that with current population characteristics, an increase in the minimum length limit would not increase yield to the recreational fishery.
APA, Harvard, Vancouver, ISO, and other styles
6

Martinho Simões, José A., and Manuel Minas da Piedade. "Kinetics in Solution." In Molecular Energetics. Oxford University Press, 2008. http://dx.doi.org/10.1093/oso/9780195133196.003.0019.

Full text
Abstract:
The main equations used to extract thermochemical data from rate constants of reactions in solution were presented in section 3.2. Here, we illustrate the application of those equations with several examples quoted from the literature. First, however, recall that the rate constant for any elementary reaction in solution, defined in terms of concentrations, is related to the activation parameters through equations 15.1 or 15.2. Equation 15.1 yields the enthalpy and the entropy of activation respectively from the slope and the intercept of a ln(k/T) versus 1/T plot (an Eyring plot). Equation 15.2 leads to the Arrhenius activation energy and the frequency factor, respectively, from the slope and the intercept of a ln k versus 1/T plot (an Arrhenius plot). All the parameters refer to the mean temperature of the plot, and Δ‡Ho is related to Ea by equation 15.3. Finally, recall that if the activation parameters are available for the forward (subscript 1) and the reverse (subscript −1) reaction, the enthalpy of this reaction is calculated by equation 15.4. In the preceding chapter on equilibrium in solution, it was pointed out that any analytical method suitable for determining equilibrium compositions of a reaction mixture at several temperatures can be used to obtain the enthalpy and entropy of that reaction. A similar statement can be made here: Any analytical method suitable for monitoring concentration changes with time at several temperatures can be used to derive the activation parameters of a reaction. Therefore, the analytical techniques used in equilibrium experiments are also applied in nonequilibrium (kinetics) studies. However, in this case, the choice of the analytical method will have an additional and important restriction, for it must consider the reaction rate. An instrumental technique suitable for determining the concentration of a given species under equilibrium conditions may be inappropriate for determining a fast concentration change of the same species.
APA, Harvard, Vancouver, ISO, and other styles
7

Gutakovskis, Viktors, and Vladimirs Gudakovskis. "Performance Assessment of the Thermodynamic Cycle in a Multi-Mode Gas Turbine Engine." In Gasification [Working Title]. IntechOpen, 2021. http://dx.doi.org/10.5772/intechopen.97458.

Full text
Abstract:
This chapter discusses the direction of development of promising multimode aviation gas turbine engines (GTE). It is shown that the development of GTE is on the way to increase the parameters engine workflow: gas temperatures in front of the turbine (T*G) and the degree of pressure increase in the compressor (P*C). It is predicted that the next generation engines will operate with high parameters of the working process, T*G = 2000–2200 K, π*C = 60–80. At this temperature of gases in front of the turbine, the working mixture in the combustion chamber (CC) is stoichiometric, which sharply narrows the range of stable operation of the CC and its efficiency drops sharply in off-design gas turbine engine operation modes. To expand the range of effective and stable work, it is proposed to use an advanced aviation GTE: Adaptive Type Combustion Chamber (ATCC). A scheme of the ATCC and the principles of its regulation in the system of a multi-mode gas turbine engine are presented. The concept of an adaptive approach is given in this article. There are two main directions for improving the characteristics of a promising aviation gas turbine engine. One is a complication of the concepts of aircraft engines and the other one is an increase in the parameters of the working process, the temperature of the gases in front of the turbine (T*G) and the degree of increasing pressure behind the compressor (π*C). It is shown how the principles of adaptation are used in these areas. The application of the adaptation principle in resolving the contradiction of the possibility of obtaining optimal characteristics of a high-temperature combustion chamber (CC) of a gas turbine engine under design (optimal) operating conditions and the impossibility of their implementation when these conditions change in the range of acceptable (non-design) gas turbine operation modes is considered in detail. The use of an adaptive approach in the development of promising gas turbine engines will significantly improve their characteristics and take into account unknown challenges.
APA, Harvard, Vancouver, ISO, and other styles
8

Parlance, J. Y., and T. S. Steenhuis. "Soil Properties and Water Movement." In Vadose Zone Hydrology. Oxford University Press, 1999. http://dx.doi.org/10.1093/oso/9780195109900.003.0008.

Full text
Abstract:
For all spatial scales, from pore through local and field, to a watershed, interaction of the land surface with the atmosphere will be one of the crucial topics in hydrology and environmental sciences over the forthcoming years. The recent lack of water in many parts of the world shows that there is an urgent need to assess our knowledge on the soil moisture dynamics. The difficulty of parameterization of soil hydrological processes lies not only in the nonlinearity of the unsaturated flow equation but also in the mismatch between the scales of measurements and the scale of model predictions. Most standard measurements of soil physical parameters provide information only at the local scale and highlight the underlying variability in soil hydrological characteristics. The efficiency of soil characteristic parameterization for the field scale depends on the clear definition of the functional relationships and parameters to be measured, and on the development of possible methods for the determination of soil characteristics with a realistic use time and effort. The soil’s hydraulic properties that affect the flow behavior can be expressed by a soil water retention curve that describes the relation between volumetric water content, θ(L3L3), and soil water pressure, h(L), plus the relation between volumetric water content and hydraulic conductivity, K(L/T). In the next section, the determination of soil hydraulic parameters is first discussed for local and field scale. Then, we show how the pore-scale processes can be linked to soil hydraulic properties. These properties are then used in some of the modern methods that use integral and superposition solutions of Richards’ equation for infiltration and water flow problems for both stable and preferential types of flows. Finally, some practical aspects for watersheds are discussed to highlight the difficulties encountered when large-scale predictions are needed.
APA, Harvard, Vancouver, ISO, and other styles
9

"Eels at the Edge: Science, Status, and Conservation Concerns." In Eels at the Edge: Science, Status, and Conservation Concerns, edited by John H. Clark. American Fisheries Society, 2009. http://dx.doi.org/10.47886/9781888569964.ch16.

Full text
Abstract:
<em>Abstract.—</em>American eels <em>Anguilla rostrata </em>were fourth in landings and third in value in the Delaware commercial finfish fisheries from 1999 to 2002. Landings and effort dropped while catch per unit effort (CPUE) varied during the period. Bait eel landings decreased more than food eel landings. The number of licensed eelers in Delaware dropped from 121 in 1997 to 77 in 2002. American eels collected from the commercial fishery ranged in length from 216 to 838 mm (mean 427 ± 133 SD), in weight from 13.6 to 820 g (mean 205 ± 205 SD), and in age from 2 to 12 years (mean 5 ± 2 SD). The length–weight relationship was <EM>W </EM>= 0.00000065 × <EM>L</EM><sup>3.18</sup>. Von Bertalanffy length-at-age parameters calculated from the sampled eels were <EM>L</EM> = 547, <em>k </em>= 0.43, and <em>t</em><sub>0</sub> = 0.38. Linearized catch curve analysis indicated an instantaneous disappearance rate of 0.59. The estimate of natural mortality (<EM>M</EM>) was 0.25, giving a fishing mortality (<EM>F</EM>) of 0.34. Yield-per-recruit analysis suggested that overfishing may be occurring in Delaware’s commercial American eel fishery.
APA, Harvard, Vancouver, ISO, and other styles
10

"centration, the concentrations are usually analysed on the logarithmic scale. In other words, it is assumed that the log-transformed data are normally distributed. Lindsey et al. (2000a) argue that this may not be reasonable and suggest that the raw concentrations might be modelled using a distribution from a particular family of skewed distributions that include the gamma and Weibull. They further suggested that the disper-sion parameter of the c [ hosen distribution be modelle ] d by the function k − −k = ′ ′ − ke ) where t is time, V and k correspond to V , k , respectively, and δ is an additional parameter. Lindsey et al. (2000a) also showed how censored data can be included in the model. Censoring usually occurs when the later concentrations of drug in the blood cannot be measured because they fall below some limit of detection in the measuring device. (Censoring can also occur if samples fall above some upper limit of detection.) A common practice for dealing with censored data is to replace the missing value with a fixed value, such as half the limit of detection. Lindsey et al. (2000a) give an example of the analysis of some PK data and show that the gamma distribution allowing for censoring is a better fit than using the lognormal distribution and replacing the censored data with a fixed value. An interesting feature of the example considered by Lindsey et al. (2000a) is that the concentration of a metabolite was also measured on each subject. Lindsey et al. (2000b) show how the drug and its metabolite can be simultaneously modelled. Further analyses of this example are described in Lindsey et al. (1999), Lindsey and Jones (2000) and Lindsey et al. (2001)." In Design and Analysis of Cross-Over Trials, 374–407. Chapman and Hall/CRC, 2003. http://dx.doi.org/10.1201/9781420036091-29.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Parameter K(t)"

1

Oh, Chang-Young, Tae-Kwang Song, and Yun-Jae Kim. "An Estimation of C(t) of Transient Creep Under Combined Mechanical and Thermal Stresses." In ASME 2010 Pressure Vessels and Piping Division/K-PVP Conference. ASMEDC, 2010. http://dx.doi.org/10.1115/pvp2010-25372.

Full text
Abstract:
In this paper, a prediction of C(t), a crack tip parameter for the transient creep condition, for the circumferential cracked pipe under combined mechanical and thermal stresses are presented. The estimation formulae for C(t)-integral of the cracked component operating under mechanical load alone have been provided for decades [1–6]. However, high temperature structures usually work under combined mechanical and thermal load. And the interactions between mechanical and thermal loads make the relaxation rate different from those produced under mechanical load alone. In this study, 3-dimensional finite element analyses are conducted to calculate the C(t)-integral under combined mechanical and thermal load. As a result, redistribution time for the crack under combined mechanical and thermal load is re-defined to quantify the C(t)-integral. The estimation of C(t)-integral using this proposed redistribution time agrees well with FE results.
APA, Harvard, Vancouver, ISO, and other styles
2

Yin, Shengjun, Paul T. Williams, Terry L. Dickson, and B. Richard Bass. "Applicability of (K, T-Stress) Methodology to Analyze RPV Under Thermal-Hydraulic Transients." In ASME 2007 Pressure Vessels and Piping Conference. ASMEDC, 2007. http://dx.doi.org/10.1115/pvp2007-26845.

Full text
Abstract:
The (K, T-stress) methodology developed by Gao and Dodds [1] is being utilized to introduce crack front plasticity with constraint effects when plastic deformation occurs in structures, for example, when the Reactor Pressure Vessels (RPVs) are subjected to thermal-hydraulic loadings. One crucial step in this procedure is to quantify combinations of flaw geometries and loading conditions (transient sequences) that illustrate the limits of applicability of the two-parameter (K, T-stress) advanced fracture methodology relevant to integrity analyses of RPVs subjected to normal and emergency operating conditions. Numerical analyses were conducted to determine the limits of applicability of (K, T-stress) advanced fracture technology for RPV under thermal-hydraulic loadings. The numerical results indicate that the (K, T-stress) methodology captures the constraint condition of the RPV with typical embedded flaws under a postulated dominant thermal-hydraulic transient.
APA, Harvard, Vancouver, ISO, and other styles
3

Yazdani Nezhad, Hamed, and Noel P. O’Dowd. "Prediction of Transient Creep Response Under Combined Primary and Secondary Loading." In ASME 2010 Pressure Vessels and Piping Division/K-PVP Conference. ASMEDC, 2010. http://dx.doi.org/10.1115/pvp2010-25272.

Full text
Abstract:
Residual stress effects on creep deformation and fracture play a significant role in structural integrity assessments of engineering components. The focus of the current work is to investigate creep behaviour of mechanically loaded cracked structures in the presence of residual stress fields. Finite-element analyses have been carried out on single edge notch bend, SEN(B), and tension, SEN(T), specimens at different residual stress and mechanical stress levels. The redistribution time and associated stress relaxation for combined primary and secondary (residual) stresses have been determined (from the finite-element analysis) and interpreted using the transient fracture mechanics parameter, C(t). The observed trends are consistent with earlier studies involving combined thermal and mechanical stress.
APA, Harvard, Vancouver, ISO, and other styles
4

Matiyev, A. Ch, and R. T. Uspazhiev. "INFLUENCE OF POLYTYPY ON PHASE TRANSITIONS IN TlGaSe2 CRYSTALS." In «АКТУАЛЬНЫЕ ВОПРОСЫ СОВРЕМЕННОЙ НАУКИ: ТЕОРИЯ, ТЕХНОЛОГИЯ, МЕТОДОЛОГИЯ И ПРАКТИКА». Международная научно-практическая онлайн-конференция, приуроченная к 60-ти летию член-корреспондента Академии наук ЧР, доктора технических наук, профессора Сайд-Альви Юсуповича Муртазаева. Crossref, 2021. http://dx.doi.org/10.34708/gstou.conf..2021.76.13.002.

Full text
Abstract:
It is shown that, in the C-polytype of TlGaSe2 crystals, the structural PT, which occurs at a temperature of T ~ 108 K, is accompanied by an abrupt change in the value of the parameter c (∆c ~ 0.004 Å). For the 2C-TlGaSe2 polytype, the c (T) dependence shows only one clearly pronounced maximum at the temperature Tc2. Moreover, at temperatures that are T1 ~ 30 K higher and T2~ 5 K below Tc2, the Curie-Weiss law is fulfilled. The absence of a fourfold increase in the parameter from the unit cell for 2C-TlGaSe2 samples in the temperature range T = 100-300 K indicates that spontaneous polarization is the order parameter of the ferroelectric PT
APA, Harvard, Vancouver, ISO, and other styles
5

Mehmanparast, A. N., C. M. Davies, and K. M. Nikbin. "Validation of the K and J Parameters in a Compact Tension Specimen Containing Intergranular and Straight Crack Paths." In ASME 2010 Pressure Vessels and Piping Division/K-PVP Conference. ASMEDC, 2010. http://dx.doi.org/10.1115/pvp2010-25281.

Full text
Abstract:
Methods have been examined to evaluate the fracture mechanics parameters J and K in finite element (FE) analyses on a compact tension, C(T), geometry using a mesh appropriate for the evaluation of both intergranular and transgranular microstructural damage processes. Realistic grain and grain boundary microstructures were modelled using ABAQUS. Both straight and deviating crack profiles were considered, representing transgranular and intergranular crack growth processes, respectively. Elastic and elastic-plastic finite element analyses were performed on a C(T) specimen model with a standard straight and deviating crack profile to derive and compare the stress intensity factor, K, and J parameter values under plane stress and plane strain conditions. Considerations as to the validity of the J domain integral calculations that ABAQUS computes are discussed. It has been found that the values of K and J obtained from FE simulations are consistent with theoretical solutions and the stress distribution ahead of the crack tip is very close to that of expected from analytical studies for the case of a straight fronted transgranular crack. Reasonable values of K and J parameters could also be achieved from the FE contour integral values of a deviating crack when the contours selected were adequately far from the crack tip. However, significant differences were found between the analytical and FE contour integral values of a deviating crack when the crack growth direction was considered to continue at the angle defined by its grain boundary. The values of J obtained by from the load line displacement measurements were uninfluenced by the crack profile and in good agreement with other analytical solutions.
APA, Harvard, Vancouver, ISO, and other styles
6

Bray, D. P., R. J. Dennis, and M. C. Smith. "Prediction of Welding Residual Stresses, Crack Initiation and Creep Crack Driving Forces C(t) Within a Continuous Finite Element Solution." In ASME 2010 Pressure Vessels and Piping Division/K-PVP Conference. ASMEDC, 2010. http://dx.doi.org/10.1115/pvp2010-25699.

Full text
Abstract:
The work reported in this paper investigates the manufacture, through-life operation and cracked behaviour of an attachment weld in a UK AGR boiler. A structural assessment of the attachment weld was performed to demonstrate its integrity. This assessment made use of complex finite element analysis of both the welding process and postulated defects. A simulation of the welding process was performed in order to predict the residual stresses and hardened material state throughout the attachment weld. The welding simulation was performed in two stages since a butter weld was deposited prior to the attachment weld itself. The accumulation of creep damage was predicted during steady normal operating conditions for the lifetime of the component. A contour map of creep damage was used to postulate the location and size of hypothetical single and double edge surface cracks within the weld. These postulated cracks were then explicitly introduced into the finite element model. The crack tip stress parameter C(t) was evaluated in order to predict the creep crack driving forces. The results from a cracked body simulation suggested that the creep crack driving force C(t) reduces as the crack grows, due to relief of the dominant welding residual stresses. The residual stress, creep damage and cracked body simulations have been brought together into a novel continuous finite element solution. The results can be used to support a safety case for continued operation of existing plant.
APA, Harvard, Vancouver, ISO, and other styles
7

Gentry, R., and Y. Nemerson. "THE ACTIVATION OF PROTHROMBIN: A LINKED REACTIVE KINETIC MODEL." In XIth International Congress on Thrombosis and Haemostasis. Schattauer GmbH, 1987. http://dx.doi.org/10.1055/s-0038-1643932.

Full text
Abstract:
Prothrombin activation by factors Xa and Va is complex, involving five linked reactions occurring either in a bulk fluid phase or in a local phospholipid (PL) surface phase, each controlled by both the fundamental energetics of the species interactions and the relevant reactant concentrations. The significance of each reaction and in particular the kinetic efficiency of the PL surface reactions is yet to be resolved. Previous essentially Michaelis-Menten kinetic treatments of prothrombin activation have been derived without concern for the kinetic influence of the order of reactant assembly or possible nonlinear effects induced by complex trapping of reactants, as observed in factor VIIa reactions (Nemerson and Gentry, Biochem. (1976) 25, 4020). We propose a general model to analyze and explain this and similar PL associated coagulation reactions. The mathematical model consist of a system of nonlinear first order differential equations:dX/dt - F(X(t),C(t),K); dC/dt - G(X(t),C(t),K), where the functionals F and G are derived from standard kinetic principles. To model prothrombin activation in this general setting the fluid and bound reactions are described by two parallel but linked systems, denoted S1(X,C,K) and S2(X*,C ,K*), respectively. In the linked relationship the primary constituents transfer between the systems, governed by a transfer component -T, resulting in a system of “linked-reactive” equations of the form:dX/dt = -F(X, C, K) - T ; dX*/dt = F*(X*,C*,K*) + T* , etc. A key consideration is to ensure that the concentrations of reactive species are relative to the reactive volume in which the kinetic interactions are to occur. The detailed equations for prothrombin activation involve for the bulk phase three primary variables X1, X2, and X3 corresponding to factors Va, Xa, and prothrombin, four complexes, Ci, and a duplicate stared set for the PL phase. After condensation the resultant system of 11 differential equations involves 28 kinetic parameters; this has significant implications for the ability to uniquely identify the parameters but poses no difficulties for its use as a predictive model via its numerical simulation for specific parameter values.
APA, Harvard, Vancouver, ISO, and other styles
8

Friswell, Michael I., Seamus D. Garvey, and Uwe Prells. "Structure Preserving Transformations and Isospectral Flows for Second Order Systems." In ASME 2003 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2003. http://dx.doi.org/10.1115/detc2003/vib-48453.

Full text
Abstract:
When the dynamics of any general second order system are cast in a state-space format, the initial choice of the state-vector usually comprises one partition representing system displacements and another representing system velocities. Coordinate transformations can be defined which result in more general definitions of the state-vector. This paper discusses the general case of coordinate transformations of state-space representations for second order systems. It identifies one extremely important subset of such coordinate transformations — namely the set of structure-preserving transformations for second order systems — and it highlights the importance of these. It shows that one particular structure-preserving transformation results in a new system characterised by real diagonal matrices and presents a forceful case that this structure-preserving transformation should be considered to be the fundamental definition for the characteristic behaviour of general second order systems — in preference to the eigenvalue-eigenvector solutions conventionally accepted. The regular λ-matrix λ2M + λD + K with M,D,K ∈ Rn×n defines a second-order system. A one-parameter trajectory of such a system {M(t),D(t),K(t)} is an isospectral flow (or more correctly an equivalence flow) if the eigenvalues and the dimensions of the associated eigenspaces are the same for all parameter values t ∈ R. This paper presents the general form for real isospectral flows of real-valued second order systems.
APA, Harvard, Vancouver, ISO, and other styles
9

Aziz, Haris, Serge Gaspers, and Kamran Najeebullah. "Weakening Covert Networks by Minimizing Inverse Geodesic Length." In Twenty-Sixth International Joint Conference on Artificial Intelligence. California: International Joint Conferences on Artificial Intelligence Organization, 2017. http://dx.doi.org/10.24963/ijcai.2017/108.

Full text
Abstract:
We consider the problem of deleting nodes in a covert network to minimize its performance. The inverse geodesic length (IGL) is a well-known and widely used measure of network performance. It equals the sum of the inverse distances of all pairs of vertices. In the MinIGL problem the input is a graph $G$, a budget $k$, and a target IGL $T$, and the question is whether there exists a subset of vertices $X$ with $|X|=k$, such that the IGL of $G-X$ is at most $T$. In network analysis, the IGL is often used to evaluate how well heuristics perform in strengthening or weakening a network. In this paper, we undertake a study of the classical and parameterized complexity of the MinIGL problem. The problem is NP-complete even if $T=0$ and remains both NP-complete and $W[1]$-hard for parameter $k$ on bipartite and on split graphs. On the positive side, we design several multivariate algorithms for the problem. Our main result is an algorithm for MinIGL parameterized by the twin cover number.
APA, Harvard, Vancouver, ISO, and other styles
10

Siegele, Dieter, Igor Varfolomeev, Jo¨rg Hohe, Volker Hardenacke, and Gerhard Nagel. "Integrity Assessment of a German PWR RPV Considering Loss of Constraint." In ASME 2010 Pressure Vessels and Piping Division/K-PVP Conference. ASMEDC, 2010. http://dx.doi.org/10.1115/pvp2010-25615.

Full text
Abstract:
The brittle failure assessment for five pressurized water reactor pressure vessels (RPV) of German nuclear power plants (NPP) has been revisited according to an advanced state of the art. Besides of recent innovation in fracture toughness curves and reference temperatures being already in the codes, also the effect of loss of constraint had to be considered when fracture toughness values determined from deep cracks in fracture toughness specimen with high multi-axial state of stress were transferred to crack configurations in the component. Thus, the available concepts were compared for their fitness for purpose, i.e. for their ability to give a fracture toughness representative to the crack configuration or flaw postulate in the component. The results of the investigation reveal a significant lower constraint in the component resulting in increased fracture toughness and showing that the brittle failure assessment based on the high constraint fracture toughness from the standard specimens can be very conservative. For consideration of the constraint conditions in the component besides the deterministic T-stress parameter also probabilistic local approach concepts based on the Weibull model were used which have the advantage of considering both the local stress strain field and the material volume under high loading. The loss of constraint was determined for several flaw postulates in the leading situations on the RPV being the coolant inlet nozzle corner and the flange joint. A considerable loss of constraint was demonstrated for flaw postulates with broken clad in the ferritic nozzle corner. Also in the flange joint the loss of constraint is evident for small flaws. In addition, for flaw postulates under the intact cladding the loss of constraint is remarkably higher than with broken postulated cladding. In summary, with the measured material toughness and the significant loss of constraint a considerable inherent margin against brittle failure can be demonstrated for the investigated load cases.
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Parameter K(t)' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography