Relevant bibliographies by topics / Output and Data Devices

Academic literature on the topic 'Output and Data Devices'

Author: Grafiati
Published: 10 December 2022
Last updated: 28 January 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Contents

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Output and Data Devices.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Output and Data Devices"

1

Fuentes, Daniel, Luís Correia, Nuno Costa, Arsénio Reis, João Barroso, and António Pereira. "SAR.IoT: Secured Augmented Reality for IoT Devices Management." Sensors 21, no. 18 (September 7, 2021): 6001. http://dx.doi.org/10.3390/s21186001.

Full text
Abstract:
Currently, solutions based on the Internet of Things (IoT) concept are increasingly being adopted in several fields, namely, industry, agriculture, and home automation. The costs associated with this type of equipment is reasonably small, as IoT devices usually do not have output peripherals to display information about their status (e.g., a screen or a printer), although they may have informative LEDs, which is sometimes insufficient. For most IoT devices, the price of a minimalist display, to output and display the device’s running status (i.e., what the device is doing), might cost much more than the actual IoT device. Occasionally, it might become necessary to visualize the IoT device output, making it necessary to find solutions to show the hardware output information in real time, without requiring extra equipment, only what the administrator usually has with them. In order to solve the above, a technological solution that allows for the visualization of IoT device information in actual time, using augmented reality and a simple smartphone, was developed and analyzed. In addition, the system created integrates a security layer, at the level of AR, to secure the shown data from unwanted eyes. The results of the tests carried out allowed us to validate the operation of the solution when accessing the information of the IoT devices, verify the operation of the security layer in AR, analyze the interaction between smartphones, the platform, and the devices, and check which AR markers are most optimized for this use case. This work results in a secure augmented reality solution, which can be used with a simple smartphone, to monitor/manage IoT devices in industrial, laboratory or research environments.
APA, Harvard, Vancouver, ISO, and other styles
2

Snik, Ad, John Noten, and Cor Cremers. "Gain and Maximum Output of Two Electromagnetic Middle Ear Implants: Are Real Ear Measurements Helpful?" Journal of the American Academy of Audiology 15, no. 03 (March 2004): 249–57. http://dx.doi.org/10.3766/jaaa.15.3.7.

Full text
Abstract:
We compared the output of two electronic middle ear implants: the Otologics MET™ device and the Vibrant Soundbridge™ device. Both devices were programmed in the linear amplification mode. Aided minus unaided sound pressure levels recorded in the ear canal (objective gain) were compared to unaided minus aided soundfield thresholds (functional gain) in 13 patients with severe sensorineural hearing loss. In addition, input/output characteristics were studied with the help of ear canal measurements. Objective gain was consistently lower than functional gain, with wide variation between patients and frequencies. Using input/output data measured in the ear canal in combination with functional gain data, the mean maximum output of the two devices was estimated, expressed in dB SPL. In comparison to NAL-R target values, (functional) gain was adequate; however, the maximum output was low, especially for the Vibrant Soundbridge device.
APA, Harvard, Vancouver, ISO, and other styles
3

Gilaev, G. G., M. Ya Khabibullin, D. G. Antoniadi, and T. V. Khismetov. "Development of devices for implementation pulse nonstationary waterflooding." SOCAR Proceedings, no. 4 (December 30, 2020): 68–74. http://dx.doi.org/10.5510/ogp20200400467.

Full text
Abstract:
To further improve the efficiency of the non-stationary flooding (acceleration of capillary impregnation oil closed pores) at the bottom of injection wells installed devices, creating pulses in the pumped liquid, with a packer. The article deals with a device designed for this purpose. A mathematical model of the device and output expressions to define the basic operating parameters of output. For comparison of theoretical calculations show the results of bench testing device. In view of previous research, the authors of substantiated the effectiveness of such devices for the nonstationary flooding in the system to maintain reservoir pressure. The preliminary positive data on fishing the use of these devices in the fields of NC «Rosneft» in 2015-2016.
APA, Harvard, Vancouver, ISO, and other styles
4

Lewis, James R., Patrick M. Commarford, Peter J. Kennedy, and Wallace J. Sadowski. "Handheld Electronic Devices." Reviews of Human Factors and Ergonomics 4, no. 1 (October 2008): 105–48. http://dx.doi.org/10.1518/155723408x342880.

Full text
Abstract:
From PDAs to cell phones to MP3 players, handheld electronic devices are ubiquitous. Human factors engineers and designers have a need to remain informed about advances in research on user interface design for this class of devices. This review provides human factors research summaries and research-based guidelines for the design of handheld devices. The major topics include anthropometry (fitting the device to the hand), input (types of device control and methods for data entry), output (display design), interaction design (one-handed use, scrolling, menu design, image manipulation, and using the mobile Web), and data sharing (among users, devices, and networks). Thus, this review covers the key aspects of the design of handheld devices, from the design of the physical form of the device through its hardware and software, including its behavior in networks.
APA, Harvard, Vancouver, ISO, and other styles
5

Sakagami, K. "Development of an FM data receiver for various message output devices." JSAE Review 18, no. 2 (April 1997): 164–66. http://dx.doi.org/10.1016/s0389-4304(96)00074-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Tayyaba, Shahzadi, Muhammad Waseem Ashraf, Thamer Alquthami, Zubair Ahmad, and Saher Manzoor. "Fuzzy-Based Approach Using IoT Devices for Smart Home to Assist Blind People for Navigation." Sensors 20, no. 13 (June 30, 2020): 3674. http://dx.doi.org/10.3390/s20133674.

Full text
Abstract:
The demand of devices for safe mobility of blind people is increasing with advancement in wireless communication. Artificial intelligent devices with multiple input and output methods are used for reliable data estimation based on maximum probability. A model of a smart home for safe and robust mobility of blind people has been proposed. Fuzzy logic has been used for simulation. Outputs from the internet of things (IoT) devices comprising sensors and bluetooth are taken as input of the fuzzy controller. Rules have been developed based on the conditions and requirements of the blind person to generate decisions as output. These outputs are communicated through IoT devices to assist the blind person or user for safe movement. The proposed system provides the user with easy navigation and obstacle avoidance.
APA, Harvard, Vancouver, ISO, and other styles
7

Van Assche, Frederic, Sander Vanheule, Luc Van Hoorebeke, and Matthieu N. Boone. "The Spectral X-ray Imaging Data Acquisition (SpeXIDAQ) Framework." Sensors 21, no. 2 (January 14, 2021): 563. http://dx.doi.org/10.3390/s21020563.

Full text
Abstract:
Photon counting X-ray imagers have found their way into the mainstream scientific community in recent years, and have become important components in many scientific setups. These camera systems are in active development, with output data rates increasing significantly with every new generation of devices. A different class of PCD (Photon Counting Detector) devices has become generally available, where camera data output is no longer a matrix of photon counts but instead direct measurements of the deposited charge per pixel in every frame, which requires significant off-camera processing. This type of PCD, called a hyperspectral X-ray camera due to its fully spectroscopic output, yet again increases the demands put on the acquisition and processing backend. Not only are bandwidth requirements increased, but the need to do extensive data processing is also introduced with these hyperspectral PCD devices. To cope with these new developments the Spectral X-ray Imaging Data Acquisition framework (SpeXIDAQ) has been developed. All aspects of the imaging pipeline are handled by the SpeXIDAQ framework: from detector control and frame grabbing, to processing, storage and live visualisation during experiments.
APA, Harvard, Vancouver, ISO, and other styles
8

Kaintura, Arun, Kyle Foss, Odysseas Zografos, Ivo Couckuyt, Adrien Vaysset, Tom Dhaene, and Bart Sorée. "Fast Characterization of Input-Output Behavior of Non-Charge-Based Logic Devices by Machine Learning." Electronics 9, no. 9 (August 26, 2020): 1381. http://dx.doi.org/10.3390/electronics9091381.

Full text
Abstract:
Non-charge-based logic devices are promising candidates for the replacement of conventional complementary metal-oxide semiconductors (CMOS) devices. These devices utilize magnetic properties to store or process information making them power efficient. Traditionally, to fully characterize the input-output behavior of these devices a large number of micromagnetic simulations are required, which makes the process computationally expensive. Machine learning techniques have been shown to dramatically decrease the computational requirements of many complex problems. We use state-of-the-art data-efficient machine learning techniques to expedite the characterization of their behavior. Several intelligent sampling strategies are combined with machine learning (binary and multi-class) classification models. These techniques are applied to a magnetic logic device that utilizes direct exchange interaction between two distinct regions containing a bistable canted magnetization configuration. Three classifiers were developed with various adaptive sampling techniques in order to capture the input-output behavior of this device. By adopting an adaptive sampling strategy, it is shown that prediction accuracy can approach that of full grid sampling while using only a small training set of micromagnetic simulations. Comparing model predictions to a grid-based approach on two separate cases, the best performing machine learning model accurately predicts 99.92% of the dense test grid while utilizing only 2.36% of the training data respectively.
APA, Harvard, Vancouver, ISO, and other styles
9

Putra, Wahyu Sukestyastama. "Implementasi Algoritma 2 Step Kalman Filter Untuk Mengurangi Noise Pada Estimasi Data Accelerometer." J-SAKTI (Jurnal Sains Komputer dan Informatika) 3, no. 1 (March 4, 2019): 142. http://dx.doi.org/10.30645/j-sakti.v3i1.108.

Full text
Abstract:
An accelerometer is a useful sensor in technological development. Currently, the accelerometer is found on smartphone devices, navigation devices, and wearable devices. However, processing the sensor output signal into data that can be interpreted is not easy. This is because the output of an accelerometer sensor has significant noise. In this study, the authors are interested in developing an estimation method using a Kalman Filter. Kalman filter is an estimator so it is expected that the sensor data are more resistant to noise interference. In this study, the author innovated the 2 step Kalman filter. The study was conducted because the use of 1 step still has noise on the estimation results. Based on the analysis of the algorithm simulation results, it can be concluded that the Kalman filter 2-step algorithm has good performance in estimating the accelerometer sensor output. When compared with the Kalman filter 1 step algorithm, the Kalman filter 2 step algorithm has a smaller average error estimation and is able to achieve a constant/stable condition faster than the Kalman filter 1 step method
APA, Harvard, Vancouver, ISO, and other styles
10

Jackson, Riley, Jonathan Gresl, and Ramon Lawrence. "Efficient External Sorting for Memory-Constrained Embedded Devices with Flash Memory." ACM Transactions on Embedded Computing Systems 20, no. 4 (June 2021): 1–21. http://dx.doi.org/10.1145/3446976.

Full text
Abstract:
Embedded devices are ubiquitous in areas of industrial and environmental monitoring, health and safety, and consumer appliances. A common use case is data collection, processing, and performing actions based on data analysis. Although many Internet of Things (IoT) applications use the embedded device simply for data collection, there are benefits to having more data processing done closer to data collection to reduce network transmissions and power usage and provide faster response. This work implements and evaluates algorithms for sorting data on embedded devices with specific focus on the smallest memory devices. In devices with less than 4 KB of available RAM, the standard external merge sort algorithm has limited application as it requires a minimum of three memory buffers and is not flash-aware. The contribution is a memory-optimized external sorting algorithm called no output buffer sort (NOBsort) that reduces the minimum memory required for sorting, has excellent performance for sorted or near-sorted data, and sorts on external memory such as SD cards or raw flash chips. When sorting large datasets, no output buffer sort reduces I/O and execution time by between 20% to 35% compared to standard external merge sort.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Output and Data Devices"

1

Thanawala, Rajiv P. "Development of G-net (a software system for graph theory & algorithms) with special emphasis on graph rendering on raster output devices." Virtual Press, 1992. http://liblink.bsu.edu/uhtbin/catkey/834618.

Full text
Abstract:
In this thesis we will describe the development of software functions that render graphical and textual information of G-Net(A software system for graph theory & algorithms) onto various raster output devices.Graphs are mathematical structures that are used to model very diverse systems such as networks, VLSI design, chemical compounds and many other systems where relations between objects play an important role. The study of graph theory problems requires many manipulative techniques. A software system (such as G-Net) that can automate these techniques will be a very good aid to graph theorists and professionals. The project G-Net, headed by Prof. Kunwarjit S. Bagga of the computer science department has the goal of developing a software system having three main functions. These are: learning basics of graph theory, drawing/manipulating graphs and executing graph algorithms.The thesis will begin with an introduction to graph theory followed by a brief description of the evolution of the G-Net system and its current status. To print on various printers, the G-Net system translates all the printable information into PostScript' files. A major part of this thesis concentrates on this translation. To begin with, the necessity of a standard format for the printable information is discussed. The choice of PostScript as a standard is then justified. Next,the design issues of translator and the translation algorithm are discussed in detail. The translation process for each category of printable information is explained. Issues of printing these PostScript files onto different printers are dealt with at the end.
Department of Computer Science
APA, Harvard, Vancouver, ISO, and other styles
2

Parker, William P. (William Peter). "Output devices for dynamic electronic holography." Thesis, Massachusetts Institute of Technology, 1989. http://hdl.handle.net/1721.1/12714.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Qureshi, Muhammad Bilal. "Cardiac Output Improvement in Mechanical Circulatory Support Devices." Diss., North Dakota State University, 2017. https://hdl.handle.net/10365/28793.

Full text
Abstract:
Mechanical circulatory support devices (MCSDs) have gained widespread clinical acceptance as an effective heart failure (HF) therapy. The concept of harnessing the kinetic energy (KE) available in the forward aortic flow (AOF) is proposed as a novel control strategy to further increase the cardiac output (CO) provided by MCSDs. A complete mathematical development of the proposed theory and its application to an example MCSDs (two-segment extra-aortic cuff) are presented. To achieve improved device performance and physiologic benefit, the example MCSD timing is regulated to maximize the forward AOF KE and minimize retrograde flow. The proof-of-concept was tested to provide support with and without KE control in a computational HF model over a wide range of HF test conditions. The simulation predicted increased stroke volume (SV) by 20% (9 mL), CO by 23% (0.50 L/min), left ventricle ejection fraction (LVEF) by 23%, and diastolic coronary artery flow (CAF) by 55% (3 mL) in severe HF at a heart rate (HR) of 60 beats per minute (BPM) during counterpulsation (CP) support with KE control. This research also explains how selection of inflation and deflation timing points for extra-aortic two-segmented cuff counterpulsation device (CPD) can affect the hemodynamic of the cardiovascular system (CVS). A comprehensive analysis of compliance profile timings generated through exhaustive search technique and the one selected through steepest descent method is carried out to predict and compare the difference in SV via computer simulation models. The influence of control modes (timing and duration) of deflation and inflation for extra-aortic two-segmented CPD on hemodynamic factors compared to no-assist HF were investigated. Simulation results (P < 0.05) predicted that the two-segmented CPD with late deflation and early inflation mode would be a suitable mode with 80% augmentation in peak diastolic aortic pressure (AOP), reduction in peak systolic pressure up to 15%, increases in CO by 60% and mean CAF by 80%. The proposed KE control concept may improve performance of other MCSDs to further enhance their potential clinical benefits, which warrants further investigation. The next step is to investigate various assist technologies and determine where this concept is best applied.
COMSATS (Pakistan)
APA, Harvard, Vancouver, ISO, and other styles
4

Romeike, Ralf. "Output statt Input." Universität Potsdam, 2010. http://opus.kobv.de/ubp/volltexte/2013/6431/.

Full text
Abstract:
Die in der Fachdidaktik Informatik im Zusammenhang mit den Bildungsstandards seit Jahren diskutierte Outputorientierung wird mittelfristig auch für die Hochschullehre verbindlich. Diese Änderung kann als Chance aufgefasst werden, aktuellen Problemen der Informatiklehre gezielt entgegenzuwirken. Basierend auf der Theorie des Constructive Alignment wird vorgeschlagen, im Zusammenhang mit der Outputorientierung eine Abstimmung von intendierter Kompetenz, Lernaktivität und Prüfung vorzunehmen. Zusätzlich profitieren Lehramtsstudenten von den im eigenen Lernprozess erworbenen Erfahrungen im Umgang mit Kompetenzen: wie diese formuliert, erarbeitet und geprüft werden. Anforderungen an die Formulierung von Kompetenzen werden untersucht, mit Beispielen belegt und Möglichkeiten zur Klassifizierung angeregt. Ein Austausch in den Fachbereichen und Fachdidaktiken über die individuell festgelegten Kompetenzen wird vorgeschlagen, um die hochschuldidaktische Diskussion zu bereichern.
APA, Harvard, Vancouver, ISO, and other styles
5

Li, Lin. "Data quality and data cleaning in database applications." Thesis, Edinburgh Napier University, 2012. http://researchrepository.napier.ac.uk/Output/5788.

Full text
Abstract:
Today, data plays an important role in people's daily activities. With the help of some database applications such as decision support systems and customer relationship management systems (CRM), useful information or knowledge could be derived from large quantities of data. However, investigations show that many such applications fail to work successfully. There are many reasons to cause the failure, such as poor system infrastructure design or query performance. But nothing is more certain to yield failure than lack of concern for the issue of data quality. High quality of data is a key to today's business success. The quality of any large real world data set depends on a number of factors among which the source of the data is often the crucial factor. It has now been recognized that an inordinate proportion of data in most data sources is dirty. Obviously, a database application with a high proportion of dirty data is not reliable for the purpose of data mining or deriving business intelligence and the quality of decisions made on the basis of such business intelligence is also unreliable. In order to ensure high quality of data, enterprises need to have a process, methodologies and resources to monitor and analyze the quality of data, methodologies for preventing and/or detecting and repairing dirty data. This thesis is focusing on the improvement of data quality in database applications with the help of current data cleaning methods. It provides a systematic and comparative description of the research issues related to the improvement of the quality of data, and has addressed a number of research issues related to data cleaning. In the first part of the thesis, related literature of data cleaning and data quality are reviewed and discussed. Building on this research, a rule-based taxonomy of dirty data is proposed in the second part of the thesis. The proposed taxonomy not only summarizes the most dirty data types but is the basis on which the proposed method for solving the Dirty Data Selection (DDS) problem during the data cleaning process was developed. This helps us to design the DDS process in the proposed data cleaning framework described in the third part of the thesis. This framework retains the most appealing characteristics of existing data cleaning approaches, and improves the efficiency and effectiveness of data cleaning as well as the degree of automation during the data cleaning process. Finally, a set of approximate string matching algorithms are studied and experimental work has been undertaken. Approximate string matching is an important part in many data cleaning approaches which has been well studied for many years. The experimental work in the thesis confirmed the statement that there is no clear best technique. It shows that the characteristics of data such as the size of a dataset, the error rate in a dataset, the type of strings in a dataset and even the type of typo in a string will have significant effect on the performance of the selected techniques. In addition, the characteristics of data also have effect on the selection of suitable threshold values for the selected matching algorithms. The achievements based on these experimental results provide the fundamental improvement in the design of 'algorithm selection mechanism' in the data cleaning framework, which enhances the performance of data cleaning system in database applications.
APA, Harvard, Vancouver, ISO, and other styles
6

Igoniderigha, Nseabasi Ekaette. "Data navigation and visualization : navigating coordinated multiple views of data." Thesis, Edinburgh Napier University, 2015. http://researchrepository.napier.ac.uk/Output/8832.

Full text
Abstract:
The field of coordinated and multiple views (CMVs) has been for over a decade, a promising technique for enhancing data visualization, yet that promise remains unfulfilled. Current CMVs lack a platform for flexible execution of certain kinds of open-ended tasks consequently users' are unable to achieve novel objectives. Navigation of data, though an important aspect of interactive visualization, has not generated the level of attention it should from the human computer interaction community. A number of frameworks for and categorization of navigation techniques exist, but further detailed studies are required to highlight the range of benefits improved navigation can achieve in the use of interactive tools such as CMVs. This thesis investigates the extent of support offered by CMVs to people navigating information spaces, in order to discover data, visualize these data and retrieve adequate information to achieve their goals. It also seeks to understand the basic principle of CMVs and how to apply its procedure to achieve successful navigation. Three empirical studies structured around the user's goal as they navigate CMVs are presented here. The objective of the studies is to propose a simple, but strong, design procedure to support future development of CMVs. The approach involved a comparative analysis of qualitative and quantitative experiments comprising of categorised navigation tasks carried out, initially on existing CMVs and subsequently on CMVs which had been redesigned applying the proposed design procedure. The findings show that adequate information can be retrieved, with successful navigation and effective visualization achieved more easily and in less time, where metadata is provided alongside the relevant data within the CMVs to facilitate navigation. This dissertation thus proposes and evaluates a novel design procedure to aid development of more navigable CMVs.
APA, Harvard, Vancouver, ISO, and other styles
7

Löfving, Erik. "Organizing physical flow data : from input-output tables to data warehouses /." Linköping : Dept. of Mathematics, Univ, 2005. http://www.bibl.liu.se/liupubl/disp/disp2005/stat5s.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Leung, Chiu Hon. "The output frequency spectrum of a thyristor phase-controlled cycloconverter using digital control techniques." Thesis, University of Plymouth, 1985. http://hdl.handle.net/10026.1/2261.

Full text
Abstract:
The principle of operation dictates that the output of a cycloconverter contains some harmonics. For drive applications, the harmonics at best increase losses in the motor and may well cause instability. Various methods of analysing the output waveform have been considered. A Fortran 77 program employing a modified Fourier series, making use of the fact that the input waveforms are sinusoidal, was used to compute the individual harmonic amplitudes. A six pulse three phase to single phase cycloconverter was built and a Z-80 microprocessor was used for the control of firing angles. Phase locked loops were used for timing, and their effect upon the output with changing input frequency and voltage were established. The experimental waveforms are analysed by a FFT spectrum analyser. The flexibility of the control circuit enables the following investigations not easily carry out using traditional analog control circuit. The phase relationship between the cosine timing and reference wave in the cosinusoidal control method was shown to affect the output waveform and hence the harmonic content. There is no clear optimum value of phase and the T.H.D. up to 500Hz remains virtually constant. However, the changes of individual harmonic amplitudes is quite significant. In practice it may not be possible to keep the value of phase constant but it should be considered when comparing control strategies. Another investigation involves the changing of the last firing angle in a half cycle. It shows that the value of firing angles produced by the cosinusoidal control method is desirable. Operation at theoretical maximum output frequency was also demonstrated.
APA, Harvard, Vancouver, ISO, and other styles
9

Zha, Xi. "Supporting multiple output devices on an ad-hoc basis in visualisation." Lincoln University, 2010. http://hdl.handle.net/10182/1391.

Full text
Abstract:
In recent years, new visualisation techniques and devices, such as remote visualisation and stereoscopic displays, have been developed to help researchers. In a remote visualisation environment the user may want to see visualisation on a different device, such as a PDA or stereo device, and in different circumstances. Each device needs to be configured correctly, otherwise it may lead to an incorrect rendering of the output. For end users, however, it can be difficult to configure each device without a knowledge of the device property and rendering. Therefore, in a multiple user and multiple display environment, to obtain the correct display for each device can be a challenge. In this project, the focus on investigating a solution that can support end users to use different display devices easily. The proposed solution is to develop an application that can support the ad-hoc use of any display device without the system being preconfigured in advance. Thus, end users can obtain the correct visualisation output without any complex rendering configuration. We develop a client-server based approach to this problem. The client application can detect the properties of a device and the server application can use these properties to configure the rendering software to generate the correct image for subsequent display on the device. The approach has been evaluated through many tests and the results show that using the application is a useful in helping end users use different display devices in visualisation.
APA, Harvard, Vancouver, ISO, and other styles
10

Kosek, Anna. "Ontology based knowledge formulation and an interpretation engine for intelligent devices in pervasive environments." Thesis, Edinburgh Napier University, 2011. http://researchrepository.napier.ac.uk/Output/6037.

Full text
Abstract:
Ongoing device miniaturization makes it possible to manufacture very small devices; therefore more of them can be embedded in one space. Pervasive computing con- cepts, envisioning computers distributed in a space and hidden from users' sight, presented by Weiser in 1991 are becoming more realistic and feasible to implement. A technology supporting pervasive computing and Ambient Intelligence also needs to follow miniaturization. The Ambient Intelligence domain was mainly focused on supercomputers with large computation power and it is now moving towards smaller devices, with limited computation power, and takes inspiration from dis- tributed systems, ad-hoc networks and emergent computing. The ability to process knowledge, understand network protocols, adapt and learn is becoming a required capability from fairly small and energy-frugal devices. This research project con- sists of two main parts. The first part of the project has created a context aware generic knowledgebase interpretation engine that enables autonomous devices to pervasively manage smart spaces using Communicating Sequential Processes as the underlying design methodology. In the second part a knowledgebase containing all the information that is needed for a device to cooperate, make decisions and react was designed and constructed. The interpretation engine is designed to be suitable for devices from different vendors, as it enables semantic interoperability based on the use of ontologies. The knowledge, that the engine interprets, is drawn from an ontology and the model of the chosen ontology is fixed in the engine. This project has investigated, designed and built a prototype of the knowledge base interpretation engine. Functional testing was performed using a simulation implemented in JCSP. The implementation simulates many autonomous devices running in parallel, communicating using a broadcast-based protocol, self-organizing into sub-networks and reacting to users' requests. The main goal of the project was to design and investigate the knowledge interpretation engine, determine the number of functions that the engine performs, to enable hardware realisation, and investigate the knowledgebase represented with use of RDF triples and chosen ontology model. This project was undertaken in collaboration with NXP Semiconductor Research Eindhoven, The Netherlands.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Output and Data Devices"

1

Build your own low-cost data acquisition and display devices. Blue Ridge Summit, PA: TAB Books, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

National Bureau of Standards. Storage module interfaces (with extensions for enhanced storage module interfaces). [Gaithersburg, Md.?]: The Bureau, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Corporation, NEC. Optoelectronic devices data book. [Kawasaki, Japan]: Nec Corporation, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Panasonic. Optoelectronic devices data handbook. Kyoto: Panasonic, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Held, Gilbert. Data communications networking devices. 2nd ed. Chichester: Wiley, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Held, Gilbert. Data communications networking devices. 3rd ed. Chichester: Wiley, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Semiconductors, Philips. Programmable logic devices: Data handbook. Eindhoven: Philips Semiconductors, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

(Europe), NEC Electronics. Optical semiconductor devices data book. Düsseldorf: NEC Electronics, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Asia-Pacific, Meeting of Statisticians on Input-Output Tables (1984 Tokyo Japan). Input-output models: Theory, data, and application. Tokyo, Japan: Institute of Developing Economies, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Semiconductors, Philips. Complex programmable logic devices: Data handbook. Eindhoven: Philips Semiconductors, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Output and Data Devices"

1

Eargle, John M. "Input and Output Impedances of Electronic Devices." In Electroacoustical Reference Data, 238–41. Boston, MA: Springer US, 1994. http://dx.doi.org/10.1007/978-1-4615-2027-6_116.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Dawoud, Dawoud Shenouda, and R. Peplow. "Interface to Local Devices — Analogue Data and Analogue Input/Output Subsystems." In Digital System Design - Use of Microcontroller, 399–454. New York: River Publishers, 2022. http://dx.doi.org/10.1201/9781003337942-8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Drumm, David. "Input/Output Devices." In The Computer in Training and Development, 79–90. Dordrecht: Springer Netherlands, 1985. http://dx.doi.org/10.1007/978-94-009-5359-8_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Trapp, Stefan, and Michael Matthies. "Data Output." In Chemodynamics and Environmental Modeling, 212–13. Berlin, Heidelberg: Springer Berlin Heidelberg, 1998. http://dx.doi.org/10.1007/978-3-642-80429-8_17.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Weik, Martin H. "output data." In Computer Science and Communications Dictionary, 1201. Boston, MA: Springer US, 2000. http://dx.doi.org/10.1007/1-4020-0613-6_13328.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Broll, Wolfgang, Paul Grimm, Rigo Herold, Dirk Reiners, and Carolina Cruz-Neira. "VR/AR Output Devices." In Virtual and Augmented Reality (VR/AR), 149–200. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-79062-2_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Costello, Tim, and Lori Blackshear. "Output." In Prepare Your Data for Tableau, 151–56. Berkeley, CA: Apress, 2019. http://dx.doi.org/10.1007/978-1-4842-5497-4_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Goodman, I. R., Ronald P. S. Mahler, and Hung T. Nguyen. "Output Measurement." In Mathematics of Data Fusion, 295–338. Dordrecht: Springer Netherlands, 1997. http://dx.doi.org/10.1007/978-94-015-8929-1_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Taylor, Graham. "Output Methods, Media and Devices." In Making Sense of Information Technology, 97–113. London: Macmillan Education UK, 1988. http://dx.doi.org/10.1007/978-1-349-10649-3_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Taylor, Graham. "Output Methods, Media and Devices." In Computer Studies GCSE, 75–95. London: Macmillan Education UK, 1991. http://dx.doi.org/10.1007/978-1-349-13834-0_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Output and Data Devices"

1

Gheorghiu, Octavian. "Mix Reality, Data and Experiences." In Design Computation Input/Output 2022. Design Computation, 2022. http://dx.doi.org/10.47330/dcio.2022.pepg4740.

Full text
Abstract:
The workshop will explore the workflow of preparing and transferring data from CAD packages to the Unity Game engine. A 3d model of a house will be prepared for the mix reality experiences, going through the process of optimising the model geometry, adding textures and optimising the output required for mobile devices. In the game engine, we will prepare a diorama model that can be shared either as an augmented reality experience or as a virtual reality experience. We will be exploring how to add time base effects and create a user interface for the mix reality experiences.
APA, Harvard, Vancouver, ISO, and other styles
2

Zhou, Gan, Olga V. Ivanova, Allen Pu, Demetri Psaltis, and Fai H. Mok. "Data output interface for holographic memory." In Optoelectronics '99 - Integrated Optoelectronic Devices, edited by Julian P. G. Bristow and Suning Tang. SPIE, 1999. http://dx.doi.org/10.1117/12.344617.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kawaguchi, N., M. Kawano, and Y. Arima. "3-D Binocular Range Sensor LSI with A High-Speed Data Output Method." In 2009 International Conference on Solid State Devices and Materials. The Japan Society of Applied Physics, 2009. http://dx.doi.org/10.7567/ssdm.2009.p-5-12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Bolshakov, A. A., A. V. Klyuchikov, and N. V. Kovylov. "Building a System Architecture for Displaying Data in a Complex of Output Devices." In 2020 International Conference on Actual Problems of Electron Devices Engineering (APEDE). IEEE, 2020. http://dx.doi.org/10.1109/apede48864.2020.9255414.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Garg, Diya, Kulbhushan Sharma, and Anshu Singla. "Designing a Green Data Processing Device using Different Input/Output Standards on FPGA." In 2018 Fifth International Conference on Parallel, Distributed and Grid Computing (PDGC). IEEE, 2018. http://dx.doi.org/10.1109/pdgc.2018.8745716.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Miller, A. Keith, John R. Bode, Robert Sachs, and Kirt Jensen. "Innovative Devices That Enable Variable Flow Systems for Energy Savings." In ASME 2011 International Mechanical Engineering Congress and Exposition. ASMEDC, 2011. http://dx.doi.org/10.1115/imece2011-65013.

Full text
Abstract:
Over the past decade numerous studies both conducted by and authorized by the US Department of Energy Office of Industrial Technology have identified significant energy savings potential by adjusting flow rates to meet process demands. As much as 40% energy savings have been achieved when variable flow pumping systems were implemented in some DOE demonstration projects. To date, only a small fraction of the identified companies in various industries which can benefit in energy savings resulting from adjustable pumping flow rates have installed the requisite capabilities. One reason for the slow rate of adoption of variable pumping is that there are few commercially available methods for adjusting pump rates. Electronic Variable Frequency Drives (VFDs) are the most commonly implemented method of varying pump speeds, usually resulting in reduced operating life of the electric drive motors and sometimes in significant costs of plant modifications. Veritran Inc. with the support of Team Technologies, Inc. is developing low-cost mechanical devices for varying electric motor speeds without the large initial investment associated with VFDs nor the other detracting features of the need to install larger electric motors and reduced motor life expectancy. Veritran’s Infinitely Variable Transmissions (IVTs), such as SM-15IVT (www.veritraninc.com) are installed between the motor and the load, which allows for soft starts, and precise output set speeds, all under programmable microprocessor control. The amount of power demanded from the motor varies as the output speed of the transmission is changed or the load torque is changed. This paper will describe the engineering development that Veritran has been pursuing over the past decade of their novel IVTs, and will present some of the test data collected to date. Results will also be presented of systems analyses where IVTs are inserted into various industrial operations and significant energy savings result.
APA, Harvard, Vancouver, ISO, and other styles
7

Naman, Yasin, Gregory J. Kowalski, and Mansour Zenouzi. "Analysis and Design Software for Integration of Renewable Energy and Energy Storage With CHP Devices." In ASME 2021 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/imece2021-73229.

Full text
Abstract:
Abstract Software with a user-friendly interface is presented for integrating energy storage and renewable energy sources with co-generation and tri-generation (CHP) systems. This simulation provides a first level screening of CHP systems and determines the effects of including renewable energy or storage systems. The inputs consist of the application’s electric load and thermal load as well as the parameters for the power producing devices, back up boilers/furnaces, vapor compression refrigeration COP and the generator and inverter efficiency. The output is the energy utilization factor (EUF), the rates of carbon dioxide production and entropy production. The simulation is based on using the thermal load to power ratio, HLRP, as a basic scaling parameter and the ratio of the cooling to total thermal load, CHR. A single design point investigation or continuous load information as well as the renewable energy output and energy storage data is controlled by the user. A dashboard report and an excel format is provided to allow the user to perform their own detail summary of the calculated results. Results comparing the performance of a CHP plant for different applications are provided. As expected, the CHP device outperforms the traditional means producing electricity.
APA, Harvard, Vancouver, ISO, and other styles
8

Olympio, Raul B., John Donahue, and Adam M. Wickenheiser. "Theoretical and Experimental Analysis of Frequency Up-Conversion Energy Harvesters Under Human-Generated Vibrations." In ASME 2014 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/smasis2014-7674.

Full text
Abstract:
Piezoelectric energy harvesters are devices capable of converting the kinetic energy present in vibration-based motion into electrical energy using piezoelectric transducers. This kind of device has its maximum efficiency when the exciting frequency matches its natural frequency. In the past years, some authors have explored the use of human motion as a vibration source, and harvesting energy in this situation is not trivial because the low-frequency characteristics of the motion are not compatible with small, light-weight transducers, which have relatively high natural frequencies. To overcome this problem, a method known as frequency up-conversion is used; it consists of a nonlinear vibration-based, magnetically excited harvester that exhibits frequency-independent performance, allowing the device to be efficient in a wide band of frequencies. In this work, the power output of a piezoelectric energy harvesting with frequency up-conversion submitted to walking and running vibrations is analyzed. Data are collected using an accelerometer located on the front pocket of each subject and then used in simulations. The model used consists of a cantilever beam with a permanent magnetic tip at the free end; this tip interacts with a magnetized structure that adds a nonlinear interaction to the model. A pure resistance matching the device’s impedance at its fundamental frequency is used to account for the output power. To verify the advantages of using the frequency up-conversion method for vibration-based energy harvesters regarding the power output and frequency band, a comparison with the linear cantilever model is analyzed. Also, in order to confirm the simulation results, a prototype of the device is built and submitted to vibration tests using a horizontally oriented motor-driven cart that recreates the motions recorded by the accelerometer; it is tested with and without the magnetic force in order to experimentally determine the nonlinearity’s effects on the power harvesting performance.
APA, Harvard, Vancouver, ISO, and other styles
9

Azzouz, Salim, Johnny Blevins, Tyler Thomas, Makenzie Johnson, Clarke O’Connor, Nchetachukwu C. Anih, Melanie Ronoh, Ernuel Tonge, and Cykelle Semper. "Data Collection and Analysis Using a Wind Turbine and a Photovoltaic Solar Panel." In ASME 2019 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/imece2019-11751.

Full text
Abstract:
Abstract A weather data collection study is currently conducted using a renewable energy training system. The system is composed of a LabVolt trainer, two sun tracking photovoltaic solar panels and a small wind turbine. The LabVolt training system is located in one of the McCoy School of Engineering laboratories, the solar panels and the wind turbine are located in the neighborhood of the Engineering building at Midwestern State University in Wichita Falls, Texas. A set of meteorological data collecting outdoor sensors to monitor the impact of weather conditions on the power generation of the sun-tracking photovoltaic solar panels and the wind turbine have been installed on the building roof. Weather parameters such as atmospheric temperature, pressure, humidity, and rainfall are monitored using a Davis Vantage Pro 2 data collecting system. A number of LabVIEW data acquisition cards and signal processing modules are used to monitor the sun-tracking photovoltaic solar panels’ output voltage, the wind turbine output voltage, the atmospheric temperature, the solar irradiance, and the wind direction, speed, and RPM. A voltage divider has been built to step down the 90V DC voltage produced by the solar panels to 12V DC voltage required for the trainer electrical circuits. A LabVIEW data processing program is used to create instantaneous graphic displays of the collected data on a monitoring screen. The LabVolt trainer is equipped with two charge controller electronic devices, one is used for the sun tracking photovoltaic solar panels, and one is used for the wind turbine. They are used to control the flow of electrical energy through a set of electrical loading devices and a set of storages batteries. Additionally, the LabVolt trainer is equipped with two kilowatt-hour-meters counting the electrical energy consumed by the electrical loads. The trainer is also equipped with two inverters transforming the 12 V DC voltage collected from both energy producing devices to 120 V that can be used by the electrical loading devices. A brief description of all used electronic components and devices is provided in the paper, as well a detailed experiment set-up with a procedure to run them. The project has been divided into three consecutive phases. The first phase dealt with connecting the solar panels, wind turbine, and data collecting sensors to the LabVIEW data acquisition software. The second phase is currently dealing with setting up the trainer solar and wind electricity providing circuits. In the third upcoming phase, it is expected that the data collected by the sensors will be gradually archived using Excel files and analyzed for weather data correlation purposes. It is also expected that the training system will be used to teach upcoming mechanical engineering students about how to set up an independent renewable energy system and the necessary equipment required to run it.
APA, Harvard, Vancouver, ISO, and other styles
10

Awodele, Oludele, Oghenerukevwe Onoruvie, Sharon Okoruwa, and Victor Dibia. "Network Power Sharing Device: Power Sharing Via USB to Power Port with Output Voltage/Current 17v-19v/4A-." In InSITE 2008: Informing Science + IT Education Conference. Informing Science Institute, 2008. http://dx.doi.org/10.28945/3283.

Full text
Abstract:
The ongoing migration of mobile lifestyles and the increasing capabilities of portable systems will continue to drive demand for more flexible and portable battery charging systems (Brown, 2006). The use of computers has been limited due to lack of constant availability of power -issues such as data loss, transaction breakages, data compromise have become major challenges in areas (especially third world countries) where power supply is a problem. Thus there is a need to provide a means of power sharing through USB for computers to share power between two systems (with special emphasis on laptops). Related works/ research has shown that the power sharing between a computer system has only been possible with smaller devices like iPod, since the USB port gives 500mA/ +5V maximum. This paper describes a device that draws similar voltage and current as the iPod for a destination system after an amplification operation has been carried out on the supplied voltage and power. The power being transferred is initiated by the software driver on detection with destination voltage and current 18V-19V/4.5A with female connector. After construction it will be available to notebook computers system specification and very useful in emergencies and available to all due to its ease of use.
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Output and Data Devices"

1

Holmes, Richard L., and Stephen W. White. Output of Fat Man and Little Boy Devices. Office of Scientific and Technical Information (OSTI), August 2013. http://dx.doi.org/10.2172/1089457.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Julio-Román, Juan Manuel. Data revisions and the output gap. Bogotá, Colombia: Banco de la República, February 2011. http://dx.doi.org/10.32468/be.642.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kline, Jane M., Martin N. Anesgart, and Thomas C. Hughes. An Evaluation of Data Entry Devices. Fort Belvoir, VA: Defense Technical Information Center, July 1994. http://dx.doi.org/10.21236/ada372597.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Smith, C. F. DELPHI: An introduction to output layout and data content. Office of Scientific and Technical Information (OSTI), August 1994. http://dx.doi.org/10.2172/10182785.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Nordhaus, William. New Data and Output Concepts for Understanding Productivity Trends. Cambridge, MA: National Bureau of Economic Research, January 2001. http://dx.doi.org/10.3386/w8097.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Allen, H. A human factors review of data entry devices. Office of Scientific and Technical Information (OSTI), June 1990. http://dx.doi.org/10.2172/6934556.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Wendelberger, James G. Extracting the Data From the LCM vk4 Formatted Output File. Office of Scientific and Technical Information (OSTI), January 2018. http://dx.doi.org/10.2172/1419732.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Passner, Jeffrey E. An Evaluation of Three-Dimensional Weather Hazards Using Sounding Data and Model Output Data. Fort Belvoir, VA: Defense Technical Information Center, August 2000. http://dx.doi.org/10.21236/ada382550.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Gavin, William T., and Kevin L. Kliesen. Forecasting Inflation and Output: Comparing Data-Rich Models with Simple Rules. Federal Reserve Bank of St. Louis, 2006. http://dx.doi.org/10.20955/wp.2006.054.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Li, Shou, Karen Zhu, and Boudewijn Gelder. Improving Efficiency of INDOT Traffic Data Collection Using GPS Devices. West Lafayette, IN: Purdue University, 2002. http://dx.doi.org/10.5703/1288284313245.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Output and Data Devices' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography