Relevant bibliographies by topics / Otočný stôl / Dissertations / Theses
To see the other types of publications on this topic, follow the link: Otočný stôl.

Dissertations / Theses on the topic 'Otočný stôl'

Author: Grafiati
Published: 28 June 2021
Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 19 dissertations / theses for your research on the topic 'Otočný stôl.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Mareček, Vojtěch. "Otočný polohovací stůl." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-264921.

Full text
Abstract:
This diploma thesis deals with projection and general design of rotary indexing table for dedicated machine tools. The major attention is given to substitution of hydraulic drive table by table driven by servomotor, namely double axis its positions in vertical and horizontal directions. The total configuration of rotary table is solved as a construction kit, user can used any servomotor and additive gearbox. The work is concentrated to the optimization of table construction for this new designed conception. The positioning and fixing of table plate is solved by couple of Hirth couplings with central hydraulic motor. The computational part of work includes calculations of dynamic of rotary motion of the table and hydraulic system. All important screw connection, gear wheels and Hirth couplings were verified by calculations. Also working lifetime of bearings and strength deformation of major constructional sections of rotary table verification were controlled. Inherent part of work is security analysis, economics analysis, patent search and analysis of construction identity. Presented work contains three-dimensional model, drawing documentation of both variants of configurations and production drawing of major section parts of rotary table.
APA, Harvard, Vancouver, ISO, and other styles
2

Nytra, Tomáš. "Otočný zvedací stůl vyšší nosnosti." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-444271.

Full text
Abstract:
This Master thesis deals with construction design of pop-up turntable with load capacity 120 tons and 1500 mm stroke. The driveline will supply by combination of hydromotor and planetary gearbox.The first part of this thesis deals with research in the field of current offer of pop-up turntables and construction elements used in pop-up turntables.Then is acceded to design of 3 different construction variants, of which is chosen one based on evaluation properties of each variant. After this part, follows on constuction design of chosen variant, including both desinging and calculating part. Part of the thesis is also required technical drawing documentation.
APA, Harvard, Vancouver, ISO, and other styles
3

Bursík, Miroslav. "Otočný zvedací stůl QHZ 20." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229984.

Full text
Abstract:
This master’s thesis deals with the design of the new concept of lifting turntable QHZ 20. The main objective is to reduce the installation depth of table. Part of thesis is background research of individual components of the forging complex with hydraulic press CKW 25. It describes the current structure QHZ table, comparing the advantages and disadvantages of possible solutions of the table. The work also includes design, description and calculation of the chosen solution.
APA, Harvard, Vancouver, ISO, and other styles
4

Obdržálek, Adam. "Otočný stůl pro horizontální vyvrtávačku." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-264919.

Full text
Abstract:
Master thesis solves engineering design of the turn-over table about size clamping surface 2000x2500 mm for horizontal boring machine WRF 130 CNC. According to requisite parameters submitter, firm Fermat CZ Ltd, is processed engineering design of the drive rotary axis, hydraulic clamping, mouting device and procedure mouting all systém. Everything is documented in the calculations and drawings. Consultations proceeded in firm Fermat CZ Ltd. All solution is enhancement of suggestions and adviced, that the have had in construction and on workshop to to a given problem.
APA, Harvard, Vancouver, ISO, and other styles
5

Axmann, Patrik. "NC otočný stůl s lineární osou." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417425.

Full text
Abstract:
This diploma thesis deals with the construction of an NC rotary table with a linear axis. The first part is devoted to the analysis of the current state of science and technology in the problem, the use of various drives, mechanisms for torque transmission, linear feed lines, measuring and an overview of tables from various manufacturers. Furthermore, the work is devoted to the creation of 4 variants of construction, then the selection of the best variant and technical calculations. At the end, the work deals with a detailed description of the machine.
APA, Harvard, Vancouver, ISO, and other styles
6

Kysela, Martin. "Návrh robotické linky pro svařování ocelového rámu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-443245.

Full text
Abstract:
The aim of this diploma thesis is to design a cell for robotic arc welding of steel frame. Three possible solutions are provided and one of them is to be chosen to work out. Construction designs of fixture, machine guarding and material racks were created and devices and components required for cell functionality were chosen. All of that with regard to the safety of workplace operators.The result is 3D model of welding cell, it´s implementation and virtual commissioning in the simulation software Process simulate. We will verify the weldability of assigned part, find out the production cycle, eliminate error and lastly the technical and economic evaluation will be work out.
APA, Harvard, Vancouver, ISO, and other styles
7

Nešpor, Vít. "Dvousouřadnicový NC stůl pro frézovací centra s hydraulickým upínačem." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230754.

Full text
Abstract:
This thesis deals with theoretical design of NC rotary tilting table for Kovosvit MAS milling machine MCV 754 - QUICK. In the beginning of this paper is made a research with focus to rotary tilting tables, paletizing technologies and rotary suppliers of energy. The main part concerns with loading analysis of rotary tilting table, proposal of motion drives, bearings and the frame of desired machine. For motion drive of each axis is chosen torque motor. Constructional solution of pressed air supply to the middle boring of face plate is realized by a rotary union. The next point of solution is arrangement of moving supply electrical and pneumatic energy to the frame of tilting axis. The last part is concerned to proposal of realizing of changing tchnological pallets by the Zero-point systems. In the end the economical analysis is made.
APA, Harvard, Vancouver, ISO, and other styles
8

Bezděk, Petr. "Konstrukční návrh otočného stolu s nosností 65 000 kilogramů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-443716.

Full text
Abstract:
The diploma thesis deals with the design of a rotary table for machining large non-rotary workpieces up to a maximum weight of 65 000 kg. The aim of the work is to analyze and evaluate the current state of knowledge in the field of rotary tables, to create a table design according to the assignment and its 3D model with part of the drawing documentation. The theoretical part of the work searches for solutions used in the construction of rotary tables in the category of table according to the assignment. The information obtained is further used in the design of rotary table solution variants. By evaluating the weight of the required properties and their degree of fulfillment, a variant of the design solution of the table is selected, which is then designed. The individual design steps are described and explained in the text part of the work accompanied by pictures and calculations. The result of the process is a structural design of the mechanical part of the rotary table with a 3D model and partially processed drawing documentation. The contribution of the work is the summarization of relevant information for the design of rotary tables, the processed procedure of solving the design of the table and the modeled design of the rotary table. These outputs can be further treated as documentation for the production of the designed table, the development of the rotary table design to deeper details or technical development in this area.
APA, Harvard, Vancouver, ISO, and other styles
9

Kűhnel, Martin. "Návrh robotického pracoviště pro lepení magnetů na DC motory." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229498.

Full text
Abstract:
The diploma thesis deals with the design of a general concept workplace for gluing magnets to the DC stators. The thesis is focused on the selection of industrial robots and their location, the design and the construction of end effectors for manipulation with segments and stators and the proposal of solution for engineering units on a workplace. Among the construction units belong: revolving tables with gripping systems, rotary tables on pallets and construction manipulators. At the end of the thesis the concept of the solution for workplace safety is created according to current legislation and safety standards.
APA, Harvard, Vancouver, ISO, and other styles
10

Balák, Pavel. "Konstrukce otočného lineárně přesuvného stolu s pevnou boční upínací deskou pro stroj FGU RT." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230818.

Full text
Abstract:
The aim of this diploma thesis is design of rotary-linear table with side clamping plate. Rotary-linear table is applicated to the profiled guideways used linear table. The work is focused on the design of the individuals nodes and their calculations.
APA, Harvard, Vancouver, ISO, and other styles
11

Záviška, Petr. "Návrh otočného stolu CES 200 s hydrostatickým uložením." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230143.

Full text
Abstract:
This diploma deals is occupied with design of the heavy rotary table with hydrostatic bearing of table. In introductory part of deals the design part are described, for exampel. tipes of bearings, drive and etc. In other parts the design of rotary table with hydrostatic bearings is described.
APA, Harvard, Vancouver, ISO, and other styles
12

Vlasák, František. "Konstrukce koncového testovacího zařízení elektromagnetu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-254347.

Full text
Abstract:
Master thesis describes a single-purpose machine design, that is used for testing a basic features of proportional solenoid. The design is created in cooperation with company NUVIA a.s. and contains mechanical solution that is processed in respect with ergonomic requirements, safety and overall costs. Machine concept is affected by customer requirements, whose name, as well as real parameters of the product will not be published, because of non-disclosure agreement.
APA, Harvard, Vancouver, ISO, and other styles
13

Dvořák, Jaroslav. "Návrh robotické buňky pro svařování s více roboty." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-229173.

Full text
Abstract:
The aim of this thesis is to design a robotic cell with two welding robots and rotary table in two designs and to compare different types of control. These designed alternatives evaluate possibly using of its parts. These designed variants compare physically and financially.
APA, Harvard, Vancouver, ISO, and other styles
14

Neumann, Ondřej. "Konstrukce multifunkčního obráběcího centra." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230950.

Full text
Abstract:
Design of multi-functional machining center The purpose of this diploma thesis is a design of turning table for multi-functional machining center. The first part is the background research of multi-functional machining centers, rotary tables, chip management and brief overview of chosen machining center’s manufacturers. The sphere of using of the designed machine, including parameters of turning table, and its basic parameters are determined on the basis of this research. Afterwards, the variants of turning table drives are drawn up and one variant of calculation and construction is made. Design of clamping desk and chip management of the machine is also made. Above a specified framework of this thesis, simplified machine foundation design and anchoring of machine parts to this basis is performed. The work also includes a 3D model of turning table and substructure. The complete set of constructed machining center was brought into immersion virtual reality environment.
APA, Harvard, Vancouver, ISO, and other styles
15

Horák, Jiří. "Návrh manipulačního stolu pro otáčení obrobků." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-229147.

Full text
Abstract:
This master’s thesis deals with the design of the manipulator for rotating objects, especially workpieces, semifinished products, or complete products around horizontal axis. It’s the manipulator for objects where is needed change orientation during production process. This thesis describes step by step construction of individual components of the manipulator and calculations of propulsive units. At the beginning the conveyor roller with propulsive unit is designed. The next step is construction of scissor lift table and choice of the propulsive unit. There is also made FEM analysis for the scissor mechanism. The next unit is aimed to the construction and computation of rotating and telescopic jaw. Then hydraulic circuit with computation of the propulsive unit is designed. As the final step the appropriate type of sensors are chosen and the step diagram of the manipulator is made. The manipulator is designed in the 3D model program and there are also made some assembly drawings.
APA, Harvard, Vancouver, ISO, and other styles
16

Musil, Marek. "Návrh robotického pracoviště pro obsluhu vstřikovacích lisů s následnou montáží a kontrolou." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-382468.

Full text
Abstract:
The thesis deals with the design of a robotic workplace for the operation of injection moulding machines. It is concerned with the design of the workplace component deployment and the evaluation of the best variant using a multi-criteria assessment. In detail, attention is paid to the end effectors of industrial robots and the assembly workplace, where finishing operations take place. Finally, the risk analysis and technical and economic evaluation of the proposed workplace are carried out.
APA, Harvard, Vancouver, ISO, and other styles
17

Hanzlík, Aleš. "Konstrukce naklápěcího otočného stolu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229937.

Full text
Abstract:
The aim of this thesis is the design of the rotary tilting table controlled the fourth and fifth axis for CNC centrum.První part includes the search for pivotally tilting tables. The second part includes the choice of technical paremetrů pivotally tilting table for selected CNC center, design of possible options , selection of appropriate options, design of the selected option.
APA, Harvard, Vancouver, ISO, and other styles
18

Procházka, Petr. "Konstrukce jednoúčelového montážního stroje pro kompletaci rozvaděče plynu v plynovém grilu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417749.

Full text
Abstract:
Objective of this thesis is creating the construction of one-purpose assembly machine for combination of gas switchboard in gas grill assembly, which is top part of the gas cooking grill, consisting of stainless steel plate and burners. There are three types of burners, one small type, two medium types and one big type. Each consists of aluminium body, nozzle, ignition electrode and gas leakage protection fuse. Prior to construction itself,  variant solutions of the assembly operations arrangement are designated. From those, the most appropriate one is chosen based on multicriteria weighting method. Construction of assembly line is created using 3D modelling program with necessary design calculations. For selected assemblies and parts, a drawing documentation has been created. Risk analysis and security of the machine’s normal operation is an integral part of the thesis. Risk analysis is created for the machine’s normal operation. In conclusion, the costs of purchasing the assembly line are calculated and the return of the investment for purchasing the machine is assessed.
APA, Harvard, Vancouver, ISO, and other styles
19

Krenarová, Eliška. "Návrh konferenčního stolku." Master's thesis, 2017. http://www.nusl.cz/ntk/nusl-431043.

Full text
Abstract:
This diploma thesis focuses on the design of a coffee table, which is further designated for custom-made or mass production and sale. The thesis is divided into theoretical and practical part. The theoretical part serves as a basis for the practical part as it documents the history of coffee tables and the research of coffee tables in the current market. The practical part presents the actual design process of the particular coffee table starting from the idea, first sketches, the selection of the materials and construction to the visualization of the product, the technical drawing and the budget for the production. This part also takes into account the observations from the theoretical part and tries to apply them in the design.
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography