Log in

Relevant bibliographies by topics / Omniphobie / Journal articles

To see the other types of publications on this topic, follow the link: Omniphobie.

Journal articles on the topic 'Omniphobie'

Author: Grafiati

Published: 24 June 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Omniphobie.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Sadri, Behnam, Debkalpa Goswami, and Ramses Martinez. "Rapid Fabrication of Epidermal Paper-Based Electronic Devices Using Razor Printing." Micromachines 9, no. 9 (August 22, 2018): 420. http://dx.doi.org/10.3390/mi9090420.

Full text

Abstract:

This work describes the use of a benchtop razor printer to fabricate epidermal paper-based electronic devices (EPEDs). This fabrication technique is simple, low-cost, and compatible with scalable manufacturing processes. EPEDs are fabricated using paper substrates rendered omniphobic by their cost-effective silanization with fluoroalkyl trichlorosilanes, making them inexpensive, water-resistant, and mechanically compliant with human skin. The highly conductive inks or thin films attached to one of the sides of the omniphobic paper makes EPEDs compatible with wearable applications involving wireless power transfer. The omniphobic cellulose fibers of the EPED provide a moisture-independent mechanical reinforcement to the conductive layer. EPEDs accurately monitor physiological signals such as ECG (electrocardiogram), EMG (electromyogram), and EOG (electro-oculogram) even in high moisture environments. Additionally, EPEDs can be used for the fast mapping of temperature over the skin and to apply localized thermotherapy. Our results demonstrate the merits of EPEDs as a low-cost platform for personalized medicine applications.

APA, Harvard, Vancouver, ISO, and other styles

2

Wang, Yubo, Qiang Guo, Zhen Li, Jingfeng Li, Ruimin He, Kaiyang Xue, and Shuqin Liu. "Preparation and Modification of PVDF Membrane and Study on Its Anti-Fouling and Anti-Wetting Properties." Water 14, no. 11 (May 26, 2022): 1704. http://dx.doi.org/10.3390/w14111704.

Full text

Abstract:

Membrane distillation (MD) has unique advantages in the treatment of high-salt wastewater because it can make full use of low-grade heat sources. The high salinity mine water in western mining areas of China is rich in Ca2+, Mg2+, SO42− and HCO3−. In the MD process, the inorganic substances in the feed will cause membrane fouling. At the same time, low surface tension organic substances which could be introduced in the mining process will cause irreversible membrane wetting. To improve the anti-fouling and anti-wetting properties of the membrane, the PVDF omniphobic membrane in this paper was prepared by electrospinning. The water contact angle (WCA) can reach 153°. Direct contact membrane distillation (DCMD) was then used for treating high-salinity mine water. The results show that, compared with the unmodified membranes, the flux reduction rate of the omniphobic membrane was reduced by 34% in 20 h, showing good anti-fouling property. More importantly, the omniphobic membrane cannot be wetted easily by the feed containing 0.3 mmol/L SDS. The extended Derjaguin–Landau–Verwey–Overbeek (XDLVO) theory was used to analyze the free energy of the interface interaction between the membrane and pollutants, aiming to show that the omniphobic membrane was more difficult to pollute. The result was consistent with the flux variation in the DCMD process, providing an effective basis for explaining the mechanism of membrane fouling and membrane wetting.

APA, Harvard, Vancouver, ISO, and other styles

3

Hensel, René, Christoph Neinhuis, and Carsten Werner. "The springtail cuticle as a blueprint for omniphobic surfaces." Chemical Society Reviews 45, no. 2 (2016): 323–41. http://dx.doi.org/10.1039/c5cs00438a.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Khan, Fahad, Ajmir Khan, Mohammad O. Tuhin, Muhammad Rabnawaz, Zhao Li, and Muhammad Naveed. "A novel dual-layer approach towards omniphobic polyurethane coatings." RSC Advances 9, no. 46 (2019): 26703–11. http://dx.doi.org/10.1039/c9ra04923a.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Jamil, Muhammad Imran, Lina Song, Juan Zhu, Numan Ahmed, Xiaoli Zhan, Fengqiu Chen, Dangguo Cheng, and Qinghua Zhang. "Facile approach to design a stable, damage resistant, slippery, and omniphobic surface." RSC Advances 10, no. 33 (2020): 19157–68. http://dx.doi.org/10.1039/d0ra01786h.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Tuteja, A., W. Choi, J. M. Mabry, G. H. McKinley, and R. E. Cohen. "Robust omniphobic surfaces." Proceedings of the National Academy of Sciences 105, no. 47 (November 10, 2008): 18200–18205. http://dx.doi.org/10.1073/pnas.0804872105.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Lu, Yao, Guanjie He, Claire J. Carmalt, and Ivan P. Parkin. "Synthesis and characterization of omniphobic surfaces with thermal, mechanical and chemical stability." RSC Advances 6, no. 108 (2016): 106491–99. http://dx.doi.org/10.1039/c6ra20392b.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Davis, Alexander, Elisa Mele, José Alejandro Heredia-Guerrero, Ilker S. Bayer, and Athanassia Athanassiou. "Omniphobic nanocomposite fiber mats with peel-away self similarity." Journal of Materials Chemistry A 3, no. 47 (2015): 23821–28. http://dx.doi.org/10.1039/c5ta06333g.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Falcón García, Carolina, Felix Stangl, Alexandra Götz, Weining Zhao, Stephan A. Sieber, Madeleine Opitz, and Oliver Lieleg. "Topographical alterations render bacterial biofilms susceptible to chemical and mechanical stress." Biomaterials Science 7, no. 1 (2019): 220–32. http://dx.doi.org/10.1039/c8bm00987b.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Snyder, Sarah A., Mathew Boban, Chao Li, J. Scott VanEpps, Geeta Mehta, and Anish Tuteja. "Lysis and direct detection of coliforms on printed paper-based microfluidic devices." Lab on a Chip 20, no. 23 (2020): 4413–19. http://dx.doi.org/10.1039/d0lc00665c.

Full text

Abstract:

This article presents an integrated microfluidic coliform lysis and detection device featuring customizable omniphilic regions created by direct printing of omniphilic channels on an omniphobic, fluorinated paper.

APA, Harvard, Vancouver, ISO, and other styles

11

Cimadoro, J., L. Ribba, S. Goyanes, and E. Cerda. "Wetting a superomniphobic porous system." Soft Matter 15, no. 42 (2019): 8621–26. http://dx.doi.org/10.1039/c9sm01091b.

Full text

Abstract:

We study experimentally and theoretically the critical pressure needed to move a liquid through a network of pores and show that, for small aperture size, wetting and leaking are typical first-order transitions, with a singular behavior at the omniphobic/omniphilic limit.

APA, Harvard, Vancouver, ISO, and other styles

12

Neelakantan, Nitin K., Patricia B. Weisensee, John W. Overcash, Eduardo J. Torrealba, William P. King, and Kenneth S. Suslick. "Spray-on omniphobic ZnO coatings." RSC Advances 5, no. 85 (2015): 69243–50. http://dx.doi.org/10.1039/c5ra11178a.

Full text

APA, Harvard, Vancouver, ISO, and other styles

13

Wilke, Kyle L., Daniel J. Preston, Zhengmao Lu, and Evelyn N. Wang. "Toward Condensation-Resistant Omniphobic Surfaces." ACS Nano 12, no. 11 (October 9, 2018): 11013–21. http://dx.doi.org/10.1021/acsnano.8b05099.

Full text

APA, Harvard, Vancouver, ISO, and other styles

14

Glavan, Ana C., Alar Ainla, Mahiar M. Hamedi, M. Teresa Fernández-Abedul, and George M. Whitesides. "Electroanalytical devices with pins and thread." Lab on a Chip 16, no. 1 (2016): 112–19. http://dx.doi.org/10.1039/c5lc00867k.

Full text

Abstract:

This work describes the adaptive use of conventional stainless steel pins—used in unmodified form or coated with carbon paste—as working, counter and quasi-reference electrodes in electrochemical devices fabricated using cotton thread or embossed omniphobic R^F paper to contain the electrolyte and sample.

APA, Harvard, Vancouver, ISO, and other styles

15

Schernikau, Martin, Jakob Sablowski, Ignacio Guillermo Gonzalez Martinez, Simon Unz, Stefan Kaskel, and Daria Mikhailova. "Preparation and Application of ZIF-8 Thin Layers." Applied Sciences 11, no. 9 (April 29, 2021): 4041. http://dx.doi.org/10.3390/app11094041.

Full text

Abstract:

Herein we compare various preparation methods for thin ZIF-8 layers on a Cu substrate for application as a host material for omniphobic lubricant-infused surfaces. Such omniphobic surfaces can be used in thermal engineering applications, for example to achieve dropwise condensation or anti-fouling and anti-icing surface properties. For these applications, a thin, conformal, homogeneous, mechanically and chemically stable coating is essential. In this study, thin ZIF-8 layers were deposited on a Cu substrate by different routes, such as (i) electrochemical anodic deposition on a Zn-covered Cu substrate, (ii) doctor blade technique for preparation of a composite layer containing PVDF binder and ZIF-8, as well as (iii) doctor blade technique for preparation of a two-layer composite on the Cu substrate containing a PVDF-film and a ZIF-8 layer. The morphology and topography of the coatings were compared by using profilometry, XRD, SEM and TEM techniques. After infusion with a perfluorinated oil, the wettability of the surfaces was assessed by contact angle measurements, and advantages of each preparation method were discussed.

APA, Harvard, Vancouver, ISO, and other styles

16

Lin, Shihong, Siamak Nejati, Chanhee Boo, Yunxia Hu, Chinedum O. Osuji, and Menachem Elimelech. "Omniphobic Membrane for Robust Membrane Distillation." Environmental Science & Technology Letters 1, no. 11 (October 2, 2014): 443–47. http://dx.doi.org/10.1021/ez500267p.

Full text

APA, Harvard, Vancouver, ISO, and other styles

17

Chhatre, Shreerang S., Wonjae Choi, Anish Tuteja, Kyoo-Chul (Kenneth) Park, Joseph M. Mabry, Gareth H. McKinley, and Robert E. Cohen. "Scale Dependence of Omniphobic Mesh Surfaces." Langmuir 26, no. 6 (March 16, 2010): 4027–35. http://dx.doi.org/10.1021/la903489r.

Full text

APA, Harvard, Vancouver, ISO, and other styles

18

Wooh, Sanghyuk, and Doris Vollmer. "Siliconbürsten: omniphobe Oberflächen mit niedrigen Gleitwinkeln." Angewandte Chemie 128, no. 24 (May 9, 2016): 6934–37. http://dx.doi.org/10.1002/ange.201511895.

Full text

APA, Harvard, Vancouver, ISO, and other styles

19

Chiao, Yu-Hsuan, Micah Belle Marie Yap Ang, Yu-Xi Huang, Sandrina Svetlana DePaz, Yung Chang, Jorge Almodovar, and S. Ranil Wickramasinghe. "A “Graft to” Electrospun Zwitterionic Bilayer Membrane for the Separation of Hydraulic Fracturing-Produced Water via Membrane Distillation." Membranes 10, no. 12 (December 7, 2020): 402. http://dx.doi.org/10.3390/membranes10120402.

Full text

Abstract:

Simultaneous fouling and pore wetting of the membrane during membrane distillation (MD) is a major concern. In this work, an electrospun bilayer membrane for enhancing fouling and wetting resistance has been developed for treating hydraulic fracture-produced water (PW) by MD. These PWs can contain over 200,000 ppm total dissolved solids, organic compounds and surfactants. The membrane consists of an omniphobic surface that faces the permeate stream and a hydrophilic surface that faces the feed stream. The omniphobic surface was decorated by growing nanoparticles, followed by silanization to lower the surface energy. An epoxied zwitterionic polymer was grafted onto the membrane surface that faces the feed stream to form a tight antifouling hydration layer. The membrane was challenged with an aqueous NaCl solution containing sodium dodecyl sulfate (SDS), an ampholyte and crude oil. In the presence of SDS and crude oil, the membrane was stable and displayed salt rejection (>99.9%). Further, the decrease was much less than the base polyvinylidene difluoride (PVDF) electrospun membrane. The membranes were also challenged with actual PW. Our results highlight the importance of tuning the properties of the membrane surface that faces the feed and permeate streams in order to maximize membrane stability, flux and salt rejection.

APA, Harvard, Vancouver, ISO, and other styles

20

Griggs, Jessica. "Omniphobia: the stuffs that stick at nothing." New Scientist 216, no. 2892 (November 2012): 46–49. http://dx.doi.org/10.1016/s0262-4079(12)63021-8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

21

Guo, Huizhang, Peter Fuchs, Kirstin Casdorff, Benjamin Michen, Munish Chanana, Harald Hagendorfer, Yaroslav E. Romanyuk, and Ingo Burgert. "Bio-Inspired Superhydrophobic and Omniphobic Wood Surfaces." Advanced Materials Interfaces 4, no. 1 (November 9, 2016): 1600289. http://dx.doi.org/10.1002/admi.201600289.

Full text

APA, Harvard, Vancouver, ISO, and other styles

22

Ma, Zhengfeng, Yang Wu, Rongnian Xu, Zhihuan Li, Yubo Liu, Jianxi Liu, Meirong Cai, Weifeng Bu, and Feng Zhou. "Robust Hybrid Omniphobic Surface for Stain Resistance." ACS Applied Materials & Interfaces 13, no. 12 (March 4, 2021): 14562–68. http://dx.doi.org/10.1021/acsami.0c22834.

Full text

APA, Harvard, Vancouver, ISO, and other styles

23

Lu, Kang Jia, Jian Zuo, Jian Chang, Hong Nan Kuan, and Tai-Shung Chung. "Omniphobic Hollow-Fiber Membranes for Vacuum Membrane Distillation." Environmental Science & Technology 52, no. 7 (March 21, 2018): 4472–80. http://dx.doi.org/10.1021/acs.est.8b00766.

Full text

APA, Harvard, Vancouver, ISO, and other styles

24

Hsu, Sheng-Hao, Yuan-Ling Chang, Yu-Chieh Tu, Chieh-Ming Tsai, and Wei-Fang Su. "Omniphobic Low Moisture Permeation Transparent Polyacrylate/Silica Nanocomposite." ACS Applied Materials & Interfaces 5, no. 8 (April 11, 2013): 2991–98. http://dx.doi.org/10.1021/am302446t.

Full text

APA, Harvard, Vancouver, ISO, and other styles

25

Fenero, Marta, Mato Knez, Iva Saric, Mladen Petravic, Hans Grande, and Jesús Palenzuela. "Omniphobic Etched Aluminum Surfaces with Anti-Icing Ability." Langmuir 36, no. 37 (August 29, 2020): 10916–22. http://dx.doi.org/10.1021/acs.langmuir.0c01324.

Full text

APA, Harvard, Vancouver, ISO, and other styles

26

HOZUMI, Atsushi. "New Developments in Omniphobic Surfaces Inspired by Nature." Journal of The Adhesion Society of Japan 51, no. 7 (2015): 370–74. http://dx.doi.org/10.11618/adhesion.51.370.

Full text

APA, Harvard, Vancouver, ISO, and other styles

27

Wooh, Sanghyuk, and Doris Vollmer. "Silicone Brushes: Omniphobic Surfaces with Low Sliding Angles." Angewandte Chemie International Edition 55, no. 24 (May 9, 2016): 6822–24. http://dx.doi.org/10.1002/anie.201511895.

Full text

APA, Harvard, Vancouver, ISO, and other styles

28

Hensel, René, Andreas Finn, Ralf Helbig, Hans-Georg Braun, Christoph Neinhuis, Wolf-Joachim Fischer, and Carsten Werner. "Biologically Inspired Omniphobic Surfaces by Reverse Imprint Lithography." Advanced Materials 26, no. 13 (December 23, 2013): 2029–33. http://dx.doi.org/10.1002/adma.201305408.

Full text

APA, Harvard, Vancouver, ISO, and other styles

29

Ghaleni, Mahdi Mohammadi, Shayan Kaviani, Kimya Rajwade, Mona Bavarian, François Perreault, and Siamak Nejati. "All Dry Bottom‐Up Assembly of Omniphobic Interfaces." Advanced Materials Interfaces 7, no. 12 (April 30, 2020): 1902159. http://dx.doi.org/10.1002/admi.201902159.

Full text

APA, Harvard, Vancouver, ISO, and other styles

30

Lu, Chun, Chunlei Su, Hongbin Cao, Xiaofeng Ma, Feng Duan, Junjun Chang, and Yuping Li. "F-POSS based Omniphobic Membrane for Robust Membrane Distillation." Materials Letters 228 (October 2018): 85–88. http://dx.doi.org/10.1016/j.matlet.2018.05.126.

Full text

APA, Harvard, Vancouver, ISO, and other styles

31

Zhao, Xiaoxiao, Md Arifur Rahman Khandoker, and Kevin Golovin. "Non-Fluorinated Omniphobic Paper with Ultralow Contact Angle Hysteresis." ACS Applied Materials & Interfaces 12, no. 13 (March 6, 2020): 15748–56. http://dx.doi.org/10.1021/acsami.0c01678.

Full text

APA, Harvard, Vancouver, ISO, and other styles

32

Salimi, Esmaeil. "Omniphobic surfaces: state-of-the-art and future perspectives." Journal of Adhesion Science and Technology 33, no. 12 (April 13, 2019): 1369–79. http://dx.doi.org/10.1080/01694243.2019.1599217.

Full text

APA, Harvard, Vancouver, ISO, and other styles

33

Lu, Kang Jia, Yuanmiaoliang Chen, and Tai-Shung Chung. "Design of omniphobic interfaces for membrane distillation – A review." Water Research 162 (October 2019): 64–77. http://dx.doi.org/10.1016/j.watres.2019.06.056.

Full text

APA, Harvard, Vancouver, ISO, and other styles

34

Mohammadi Ghaleni, Mahdi, Abdullah Al Balushi, Mona Bavarian, and Siamak Nejati. "Omniphobic Hollow Fiber Membranes for Water Recovery and Desalination." ACS Applied Polymer Materials 2, no. 8 (July 27, 2020): 3034–38. http://dx.doi.org/10.1021/acsapm.0c00353.

Full text

APA, Harvard, Vancouver, ISO, and other styles

35

Zhao, Hanyang, Chirag Anand Deshpande, Longnan Li, Xiao Yan, Muhammad Jahidul Hoque, Gowtham Kuntumalla, Manjunath C. Rajagopal, et al. "Extreme Antiscaling Performance of Slippery Omniphobic Covalently Attached Liquids." ACS Applied Materials & Interfaces 12, no. 10 (February 11, 2020): 12054–67. http://dx.doi.org/10.1021/acsami.9b22145.

Full text

APA, Harvard, Vancouver, ISO, and other styles

36

Dufour, Renaud, Maxime Harnois, Vincent Thomy, Rabah Boukherroub, and Vincent Senez. "Contact angle hysteresis origins: Investigation on super-omniphobic surfaces." Soft Matter 7, no. 19 (2011): 9380. http://dx.doi.org/10.1039/c1sm05832k.

Full text

APA, Harvard, Vancouver, ISO, and other styles

37

Wang, Liming, and Thomas J. McCarthy. "Covalently Attached Liquids: Instant Omniphobic Surfaces with Unprecedented Repellency." Angewandte Chemie 128, no. 1 (November 16, 2015): 252–56. http://dx.doi.org/10.1002/ange.201509385.

Full text

APA, Harvard, Vancouver, ISO, and other styles

38

Wang, Liming, and Thomas J. McCarthy. "Covalently Attached Liquids: Instant Omniphobic Surfaces with Unprecedented Repellency." Angewandte Chemie International Edition 55, no. 1 (November 16, 2015): 244–48. http://dx.doi.org/10.1002/anie.201509385.

Full text

APA, Harvard, Vancouver, ISO, and other styles

39

De Marco, Carmela, Valeria Oldani, Claudia Letizia Bianchi, Marinella Levi, and Stefano Turri. "A biomimetic surface treatment to obtain durable omniphobic textiles." Journal of Applied Polymer Science 132, no. 32 (May 14, 2015): n/a. http://dx.doi.org/10.1002/app.42404.

Full text

APA, Harvard, Vancouver, ISO, and other styles

40

Kim, Ju Hyeon, Tae Soup Shim, and Shin-Hyun Kim. "Lithographic Design of Overhanging Microdisk Arrays Toward Omniphobic Surfaces." Advanced Materials 28, no. 2 (November 17, 2015): 291–98. http://dx.doi.org/10.1002/adma.201503643.

Full text

APA, Harvard, Vancouver, ISO, and other styles

41

Lee, Young-Ah Lucy, Shiyi Zhang, Jiaqi Lin, Robert Langer, and Giovanni Traverso. "A Janus Mucoadhesive and Omniphobic Device for Gastrointestinal Retention." Advanced Healthcare Materials 5, no. 10 (April 6, 2016): 1141–46. http://dx.doi.org/10.1002/adhm.201501036.

Full text

APA, Harvard, Vancouver, ISO, and other styles

42

Grigoryev, Anton, Yuri Roiter, Ihor Tokarev, Igor Luzinov, and Sergiy Minko. "Colloidal Occlusion Template Method for Micromanufacturing of Omniphobic Surfaces." Advanced Functional Materials 23, no. 7 (September 25, 2012): 870–77. http://dx.doi.org/10.1002/adfm.201201575.

Full text

APA, Harvard, Vancouver, ISO, and other styles

43

Glavan, Ana C., Ramses V. Martinez, Anand Bala Subramaniam, Hyo Jae Yoon, Rui M. D. Nunes, Heiko Lange, Martin M. Thuo, and George M. Whitesides. "Omniphobic “RFPaper” Produced by Silanization of Paper with Fluoroalkyltrichlorosilanes." Advanced Functional Materials 24, no. 1 (July 26, 2013): 60–70. http://dx.doi.org/10.1002/adfm.201300780.

Full text

APA, Harvard, Vancouver, ISO, and other styles

44

Huang, Shilin, Juan Li, Lin Liu, Lidan Zhou, and Xuelin Tian. "Omniphobic Surfaces: Lossless Fast Drop Self‐Transport on Anisotropic Omniphobic Surfaces: Origin and Elimination of Microscopic Liquid Residue (Adv. Mater. 27/2019)." Advanced Materials 31, no. 27 (July 2019): 1970197. http://dx.doi.org/10.1002/adma.201970197.

Full text

APA, Harvard, Vancouver, ISO, and other styles

45

Wehner, Raymond. "Optimal shadow omniphonic microphone and loudspeaker system." Journal of the Acoustical Society of America 87, no. 2 (February 1990): 932. http://dx.doi.org/10.1121/1.398819.

Full text

APA, Harvard, Vancouver, ISO, and other styles

46

Li, Xuesong, Abhishek Dutta, Qirong Dong, Sasha Rollings-Scattergood, and Jongho Lee. "Dissolved Methane Harvesting Using Omniphobic Membranes for Anaerobically Treated Wastewaters." Environmental Science & Technology Letters 6, no. 4 (March 6, 2019): 228–34. http://dx.doi.org/10.1021/acs.estlett.9b00076.

Full text

APA, Harvard, Vancouver, ISO, and other styles

47

Susarrey-Arce, A., Á. G. Marín, H. Nair, L. Lefferts, J. G. E. Gardeniers, D. Lohse, and A. van Houselt. "Absence of an evaporation-driven wetting transition on omniphobic surfaces." Soft Matter 8, no. 38 (2012): 9765. http://dx.doi.org/10.1039/c2sm25746g.

Full text

APA, Harvard, Vancouver, ISO, and other styles

48

Deng, Li, Haohui Ye, Xiong Li, Peiyun Li, Jiawei Zhang, Xuefen Wang, Meifang Zhu, and Benjamin S. Hsiao. "Self-roughened omniphobic coatings on nanofibrous membrane for membrane distillation." Separation and Purification Technology 206 (November 2018): 14–25. http://dx.doi.org/10.1016/j.seppur.2018.05.035.

Full text

APA, Harvard, Vancouver, ISO, and other styles

49

Huang, Xiayun, James D. Chrisman, and Nicole S. Zacharia. "Omniphobic Slippery Coatings Based on Lubricant-Infused Porous Polyelectrolyte Multilayers." ACS Macro Letters 2, no. 9 (September 4, 2013): 826–29. http://dx.doi.org/10.1021/mz400387w.

Full text

APA, Harvard, Vancouver, ISO, and other styles

50

Credi, Caterina, Marinella Levi, Stefano Turri, and Giovanni Simeone. "Stereolithography of perfluoropolyethers for the microfabrication of robust omniphobic surfaces." Applied Surface Science 404 (May 2017): 268–75. http://dx.doi.org/10.1016/j.apsusc.2017.01.208.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!