Academic literature on the topic 'Olives – Recyclage'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Olives – Recyclage.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "Olives – Recyclage":
Mekki, H. "Recyclage des déchets de la trituration des olives dans les briques de construction." Annales de Chimie Science des Matériaux 28, no. 1 (January 2003): 109–27. http://dx.doi.org/10.1016/s0151-9107(03)00010-2.
Bouigua, Hassan, Raifa Bakali, Hassna Jaber, Karima El Kabous, Soumaya Choukri, Mohamed Elyachioui, and Mohammed Ouhssine. "A remarkable step in the aerobic biological treatment of Olive Mill Wastewater (OMW): A combination of selected microbial strains that enhance their decolorization and depollution." E3S Web of Conferences 527 (2024): 02007. http://dx.doi.org/10.1051/e3sconf/202452702007.
Dahim, M. A., M. Abuaddous, H. Al-Mattarneh, A. E. Alluqmani, and R. Ismail. "The use of olive waste for development sustainable rigid pavement concrete material." IOP Conference Series: Materials Science and Engineering 1212, no. 1 (January 1, 2022): 012032. http://dx.doi.org/10.1088/1757-899x/1212/1/012032.
Abu-Dalo, Muna, Jehad Abdelnabi, and Abeer Al Bawab. "Preparation of Activated Carbon Derived from Jordanian Olive Cake and Functionalized with Cu/Cu2O/CuO for Adsorption of Phenolic Compounds from Olive Mill Wastewater." Materials 14, no. 21 (November 4, 2021): 6636. http://dx.doi.org/10.3390/ma14216636.
Lertcumfu, Narumon, Kannikar Kaewapai, Pharatree Jaita, Tawee Tunkasiri, Somnuk Sirisoonthorn, and Gobwute Rujijanagul. "Effects of olive oil on physical and mechanical properties of ceramic waste-based geopolymer foam." Journal of Reinforced Plastics and Composites 39, no. 3-4 (December 27, 2019): 111–18. http://dx.doi.org/10.1177/0731684419896852.
Dini, Irene, Giulia Graziani, Francalisa Luisa Fedele, Andrea Sicari, Francesco Vinale, Luigi Castaldo, and Alberto Ritieni. "An Environmentally Friendly Practice Used in Olive Cultivation Capable of Increasing Commercial Interest in Waste Products from Oil Processing." Antioxidants 9, no. 6 (June 1, 2020): 466. http://dx.doi.org/10.3390/antiox9060466.
Albiach, Remedios, Pedro Rojo, Sergio Lloret, Vicente Fajardo, Gloria Fayos, and Tatiana Montoya. "Ecotoxicological evaluation and characterization of sewage sludge and agri-food waste composts." Soil and Environment 42, no. 2 (November 30, 2023): 130–39. http://dx.doi.org/10.25252/se/2023/242888.
Costantino, Francesco, Giulio Di Gravio, Genny Sciarra, and Massimo Tronci. "Environmental Chains for Secondary Raw Materials to Reduce Production Wastes through Reuse and Recycle." Applied Mechanics and Materials 295-298 (February 2013): 1714–19. http://dx.doi.org/10.4028/www.scientific.net/amm.295-298.1714.
Sayin, Fatih, Sibel Tunali Akar, Tamer Akar, Sema Celik, and Tevfik Gedikbey. "Chitosan immobilization and Fe3O4 functionalization of olive pomace: An eco–friendly and recyclable Pb2+ biosorbent." Carbohydrate Polymers 269 (October 2021): 118266. http://dx.doi.org/10.1016/j.carbpol.2021.118266.
Dedousi, Anna, Maria-Zoi Kritsa, and Evangelia N. Sossidou. "Thermal Comfort, Growth Performance and Welfare of Olive Pulp Fed Broilers during Hot Season." Sustainability 15, no. 14 (July 12, 2023): 10932. http://dx.doi.org/10.3390/su151410932.
Dissertations / Theses on the topic "Olives – Recyclage":
Hassaini, Leila. "Étude de la Morphologie et des Propriétés de Biocomposites Poly(3-Hydroxybutyrateco- 3-Hydroxyvalerate) (PHBV)/Farine de Grignons d’Olive." Thesis, Lorient, 2016. http://www.theses.fr/2016LORIS427/document.
This work aims to develop a biocomposites based on poly(3-hydroxybutyrate-co-3-hydroxyvalérate) (PHBV) and olive husk flour (OHF) prepared by melt compounding. It's articulated around four parts. The first part includes a study of the morphology and physical properties of the PHBV/OHF biocomposite samples at the loading rates of 10, 20 and 30 wt%. The results indicate that the PHBV/OHF system is characterized by a phase separation whose number and size of OHF particles increases with the loading rate. Moreover, the thermal stability and the barrier properties against water vapor and oxygen have decreased. On the other hand, the incorporation of the OHF in the PHBV matrix induces an increase in the Young's modulus which is accentuated with filler content. The same trend is also observed with the storage modulus determined by DMA. In the second part, the effects of PHBV-g-MA used as the compatibilizer for PHBV/OHF biocomposites were evaluated as a function of the loading rate. The morphological characterization of the ternary system revealed that the presence of PHBV-g-MA in the PHBV/OHF biocomposites induces better interfacial adhesion between the OHF particles and the PHBV matrix due to filler-matrix interactions. Consequently, a significant improvement in the mechanical, viscoelastic and gas barrier properties (water vapor and oxygen) is observed. In the third part, a chemical modification of OHF with trimethoxy(octadecyl)-silane (TMOS) and its influence on the morphology and physical properties of PHBV/OHF: 80/20 biocomposites was studied. The results reveal a fine and homogeneous dispersion of the TMOS-treated OHF in the PHBV matrix with apparently fewer microvides compared to the unmodified biocomposite. The physical and mechanical properties of the modified PHBV/OHF biocomposite are significantly improved. The last part devoted to a study of the hygrothermal aging in sea water at 25 and 40°C of films of biocomposites PHBV/OHF: 80/20 before and after modification reveals that the OHF promotes the degradation kinetics of the PHBV/OHF system regardless of treatment. However, the organo-silane-treated PHBV/OHF biocomposite is relatively characterized by a resistance to hygrothermal degradation at 25 and 40°C compared to the rest of the biocomposite samples
El, boukhari Mohamed. "« Analyse expérimentale du comportement mécanique et thermiqued'un béton et d'un mortier allégés par des grignons d'olives : Application au bâtiment »." Electronic Thesis or Diss., Reims, 2023. http://www.theses.fr/2023REIMS040.
The management of agricultural waste and the promotion of sustainable building materials offer many considerable benefits. By integrating sustainable practices into the construction sector, we have the ability to reduce our ecological footprint by limiting the excessive exploitation of natural resources. The research conducted in this study aims to develop a lightweight structural concrete and cement mortar using organic olive pomace aggregates. Two types of aggregates were used, depending on whether they were mixed with or without olive mill wastewater. The main objective of this study is to experimentally evaluate the mechanical and thermal properties of lightened concrete and mortar specimens in comparison with ordinary concrete and mortar specimens. They were prepared using dry and saturated olive pomace aggregates, with a percentage substitution of natural sand ranging from 0% to 15%. The results showed that the optimal formulation for producing lightweight concrete consists of 5% dry olive pomace aggregates mixed with olive mill wastewater. This formulation offers better mechanical properties, including a compressive strength of 25 MPa, a tensile strength of 4.61 MPa, and a dynamic modulus of elasticity of 44.39 GPa. Additionally, the resulting material has a reduced dry bulk density, leading to a decrease of approximately 5.69% compared to the reference concrete. For cement mortar, the best results were obtained with a mixture containing 5% dry olive pomace aggregates mixed with olive mill wastewater. The results showed a marginal effect on compressive strength (Rc), reaching 33.50 MPa after 28 days of curing. However, for both concrete and mortar, microstructural analysis revealed weak adhesion between olive pomace aggregates and the cement matrix at the Interfacial Transition Zone. Experimental tests also showed that increasing the content of olive pomace aggregates reduces the ultrasound propagation velocity and the dynamic modulus of elasticity of lightweight concrete and mortar, as well as their workability, while increasing their porosity.As regards the thermal properties of the developed materials, the incorporation of olive pomace aggregates led to an improvement in thermal resistance. In the case of lightweight concrete with 5% of dry olive pomace aggregates mixed with olive mill wastewater, the thermal conductivity (λ) decreased from 1.3 W/m·K (for the control specimen) to 0.86 W/m·K. In the case of cement mortar containing 5% of dry olive pomace aggregates mixed with olive mill wastewater, the thermal conductivity (λ) decreased from 1.1 W/m·K (control specimen) to 0.87 W/m·K. In conclusion, this study revealed that the materials developed and tested under laboratory conditions meet the required standards for general use in construction
Kainz, Quirin [Verfasser], and Oliver [Akademischer Betreuer] Reiser. "Scavengers, reagents, and catalysts supported on recyclable magnetic nanoparticles / Quirin Kainz. Betreuer: Oliver Reiser." Regensburg : Universitätsbibliothek Regensburg, 2013. http://d-nb.info/1060889137/34.
Khemakhem, Marwa. "Valorisation du grignon d’olives : Utilisation comme charge dans des mélanges à matrice polymère." Thesis, Lyon, 2017. http://www.theses.fr/2017LYSEI002.
This study is a contribution to the valorization of Olive Solid Waste (OSW) which displays a Lignocellulosic nature. The proposed approach consists in using the OSW as a filler in commodity polymers namely the poly (ethylene/propylene) [CEP] of fossil origin and the poly (lactic acid), derived from renewable resources. The different formulations, CEP/GO and PLA/GO, processed in the molten state in a twin screw extruder were studied from the side of rheological, thermal, mechanical properties and morphology. Different copolymers of various structures were used in order to promote the adhesion in the interface of the components and/or to reduce the polymer matrix degradation and to improve the composite systems performances. Morphological observations corroborated perfectly the studied properties