Books on the topic 'Oil well drilling'

Mills, Peter G. Deviated drilling. Boston: International Human Resources Development Corporation, 1986.

T, Bourgoyne Adam, ed. Applied drilling engineering. Richardson, TX: Society of Petroleum Engineers, 1986.

(Louisiana), Well Control School, ed. Basic drilling technology. Harvey, La: The School, 1998.

University of Texas at Austin. Petroleum Extension Service. Routine drilling operations. Austin, Texas: Petroleum Extension Service, Division of Continuing and Innovative Education, The University of Texas at Austin, 2015.

Fraser, Ken. Managing drilling operations. London: Elsevier Applied Science, 1991.

Woods, Joe D. World Oil casing while drilling handbook. Houston: Gulf Pub. Co., 2003.

Aadnøy, Bernt Sigve. Advanced drilling and well technology. Edited by Society of Petroleum Engineers (U.S.). Richardson, TX: Society of Petroleum Engineers, 2009.

Randall, Ben. Drilling a straight hole. Austin, Texas: Petroleum Extension Service, Division of Continuing and Innovative Education, 2015.

Rogachev, M. K. Borʹba s oslozhnenii︠a︡mi pri dobyche nefti. Moskva: Nedra, 2006.

Dareing, Don W. Mechanics of drillstrings and marine risers. New York, NY: ASME Press, 2012.

Investigations, United States Congress House Committee on Interior and Insular Affairs Subcommittee on General Oversight and. Relationship between offshore oil drilling and the proposed Pacific Palisades onshore drilling project: Oversight hearing before the Subcommittee on General Oversight and Investigations of the Committee on Interior and Insular Affairs, House of Representatives, One Hundredth Congress, second session ... hearing held in Santa Monica, CA, October 24, 1988. Washington: U.S. G.P.O., 1989.

Alberta. Energy Resources Conservation Board. Drilling and completions operations guide. Calgary, Alta: Energy Resources Conservation Board, 1991.

Baker, Ron. A primer of oilwell drilling: A basic text of oil and gas drilling. 5th ed. Austin, Tex: Petroleum Extension Service, Div. of Continuing Education, the University of Texas at Austin in cooperation with International Association of Drilling Contractors, Houston, Texas, 1996.

Baker, Ron. A primer of oilwell drilling: A basic text of oil and gas drilling. 6th ed. Austin, Tex: Petroleum Extension Service, Continuing & Extended Education, University of Texas at Austin, 2001.

Gabolde, Gilles. Drilling data handbook. 8th ed. Paris: Editions Technip, 2006.

Gabolde, Gilles. Drilling data handbook. 7th ed. Paris: Technip, 1999.

Sigve, Aadnøy Bernt, and Society of Petroleum Engineers (U.S.), eds. Fundamentals of drilling engineering. Richardson, TX: Society of Petroleum Engineers, 2011.

Devereux, Steve, and Steve Devereux. Practical well planning and drilling manual. Tulsa, Okla: PennWell, 1998.

Gamzatov, S. M. Primenenie vi͡a︡zhushchikh veshchestv v nefti͡a︡nykh i gazovykh skvazhinakh. Moskva: "Nedra", 1985.

Alberta Energy and Utilities Board. Surface casing depth minimum requirements. Calgary, Alta: Energy Resources Conservation Board, 1997.

Schechter, Robert Samuel. Oil well stimulation. Englewood Cliff, N.J: Prentice Hall, 1992.

Institute, American Petroleum, ed. Well completions and footage drilled in the United States, 1970-1982. Washington, D.C. (1220 L St., N.W., Washington 20005): American Petroleum Institute, 1985.

Leonov, Eugeniy G. Applied hydroaeromechanics in oil and gas drilling. Hoboken, N.J: Wiley, 2010.

Philip C. Crouse & Associates., ed. Economic analysis of horizontal drilling investments. Houston, Tex: Gulf Pub. Co., 1991.

California. Legislature. Senate. Subcommittee on Offshore Oil and Gas Development. Interim hearing on the role of the state in reducing the major risks of offshore oil and gas operations: The Santa Barbara Channel and Santa Maria Basin as a case study : University Center, University of California, Santa Barbara, November 4, 1985. Sacramento, CA: The Subcommittee, 1985.

Abzug, Malcolm J. Palisades oil: A community battles over oil drilling. Pacific Palisades, Calif: M.J. Abzug, 1991.

Terry, Brittenham, Moore Preston L, and Society of Petroleum Engineers (U.S.), eds. Advanced well control. Richardson, Tex: Society of Petroleum Engineers, 2003.

Ecole nationale supérieure du pétrole et des moteurs (France), ed. Drilling. Paris: Éditions Technip, 1996.

White, Katherine. Oil rig workers: Life drilling for oil. New York: Rosen Pub. Group, 2003.

J, Finley Robert, and University of Texas at Austin. Bureau of Economic Geology., eds. Opportunities for horizontal drilling in Texas. Austin, Tex: Bureau of Economic Geology, University of Texas at Austin, 1990.

Contreras, David A. Offshore oil and gas development in the U.S. Hauppauge, N.Y: Nova Science Publishers, 2011.

Technology, Society for Underwater, ed. Second generation subsea production systems: Proceedings of an international conference (Subsea International '89). London: Graham & Trotman, 1989.

Samuel, G. Robello. Downhole drilling tools. Houston, TX: Gulf Pub., 2007.

International, Conference on Drilling Wastes (1988 Calgary Alta). Drilling wastes. London: Elsevier Applied Science, 1989.

Aadnøy, Bernt Sigve. Modern well design. Houston, Tex: Gulf Pub. Co., 1997.

Aadnøy, Bernt Sigve. Modern well design. Rotterdam, Netherlands: A. A. Balkema, 1996.

Kenzhegaliev, A. Ekologicheskoe sostoi︠a︡nie neftegazovykh mestorozhdenii Zapadnogo Kazakhstana. Almaty: Gylym, 1997.

Perepelichenko, V. F. Tekhnologii͡a stroitelʹstva skvazhin v slozhnykh uslovii͡akh Prikaspiĭskogo regiona: Sbornik nauchnykh trudov. Moskva: NIPIneftʹ, 1990.

Kruger, Paul W. Blackleaf field developments EIS: Technical report on climate, air quality and noise. Billings, Mont: Bureau of Land Management, Montana State Office, 1987.

1927-, Stern Thomas, David Britt, and Americans for Energy Independence, eds. The Arctic National Wildlife Refuge debate. [Washington, D.C.]: Americans for Energy Independence, 1987.

Holsan, Gary. Sohare Creek unit exploratory oil well no. 1-35: Draft environmental impact statement. Rock Springs, Wyo: Dept. of Interior, Bureau of Land Management, Rock Springs District, 1987.

A, Lykov E., and Sredneaziatskiĭ nauchno-issledovatelʹskiĭ institut geologii i mineralʹnogo syrʹi͡a︡., eds. Burenie nefti͡a︡nykh i gazovykh skvazhin v oslozhnennykh uslovii͡a︡kh Uzbekistana. Tashkent: Glav. koordinat͡s︡ionnoe geol. upr. "Uzbekgeologii͡a︡," Sredneaziatskiĭ nauchno-issl. in-t geologii i mineralʹnogo syrʹi͡a︡, 1989.

S, Tishchenko A., and Shevaldin I. E, eds. Rat͡s︡ionalʹnoe raskhodovanie i normirovanie materialʹno-tekhnicheskikh resursov v neftegazovoĭ promyshlennosti: Sbornik trudov. Moskva: VNIIOĖNG, 1990.

I︠A︡remiĭchuk, R. S. Osvoi︠e︡nni︠a︡ sverdlovyn: Praktykum. Lʹviv: Vyd-vo "Svit", 1997.

Adams, Neal Jay. Drilling engineering: A complete well planning handbook. Tulsa, Okla: PennWell Pub. Co., 1985.

Seid-Rza, M. K. Preduprezhdenie oslozhneniĭ v kinetike burovykh prot͡s︡essov. Moskva: "Nedra", 1991.

Rodríguez, J. Moraño. Guía técnica de sondeos geotérmicos profundos. Madrid: Fundación de la Energía de la Comunidad de Madrid, 2011.

Shadrin, L. N. Proektirovanie stroitelʹstva nefti͡a︡nykh i gazovykh skvazhin. Moskva: "Nedra", 1987.

P, Nomikosov I͡U︡, and Sredneaziatskiĭ nauchno-issledovatelʹskiĭ institut geologii i mineralʹnogo syrʹi͡a︡., eds. Burenie nefti͡a︡nykh i gazovykh skvazhin v oslozhnennykh uslovii͡a︡kh Uzbekistana. Tashkent: Sredneaziatskiĭ nauchno-issl. in-t geologii i mineralʹnogo syrʹi͡a︡, 1988.

Australian Drilling Industry Training Committee. Drilling. Taylor & Francis Group, 2010.