Relevant bibliographies by topics / Nondestructive and destructive testing

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Nondestructive and destructive testing'

Author: Grafiati
Published: 28 June 2021
Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Nondestructive and destructive testing.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Nondestructive and destructive testing"

1

Cherepanov, Anatoliy. "EVALUATION OF NONDESTRUCTIVE TESTING RESULTS." Scientific Papers Collection of the Angarsk State Technical University 2021, no. 1 (July 5, 2021): 67–76. http://dx.doi.org/10.36629/2686-7788-2021-1-1-67-76.

Full text
Abstract:
The issues of assessing the volume and efficiency of non–destructive testing in order to improve the quality and completeness of information for determining the degradation processes that cause the destruction of technical devices, for automating data processing, for determining time, labor and cost, taking into account the volume, efficiency and labor intensity.
APA, Harvard, Vancouver, ISO, and other styles
2

Holčapek, Ondřej, Jiří Litoš, and Jan Zatloukal. "Destructive and Nondestructive Characteristics of Old Concrete." Advanced Materials Research 1054 (October 2014): 243–47. http://dx.doi.org/10.4028/www.scientific.net/amr.1054.243.

Full text
Abstract:
This paper aims at determination of mechanical properties of 28 years old concrete with various nondestructive and destructive testing methods. All investigated parameters were determined on drilled cores with diameter 79.8 mm gained from existing bridge. On these samples Schmidt rebound testing and destructive force loading test were performed. Static (from loading test) and dynamic (measured by ultrasonic device) modulus of elasticity was also measured. The evaluation of destructive and nondestructive testing was according to the Czech Standards. Testing of old concrete from real structures is important especially prior to the reconstruction, strengthening or repair of the structure, when the structural engineer needs to know the characteristics. The compressive strength measured destructively on cylinders achieved average value 28 MPa, while the Schmidt rebound hammer test showed strength 44 MPa. The average value of static modulus of elasticity was 26 GPa.
APA, Harvard, Vancouver, ISO, and other styles
3

Boutros, C. P., M. Kasra, M. D. Grynpas, and D. R. Trout. "The Effect of Repeated Freeze-thaw Cycles on the Biomechanical Properties of Canine Cortical Bone." Veterinary and Comparative Orthopaedics and Traumatology 13, no. 02 (2000): 59–64. http://dx.doi.org/10.1055/s-0038-1632632.

Full text
Abstract:
SummaryAs orthopaedic investigations have become more intricate, bone specimens have sometimes undergone multiple freeze-thaw cycles prior to biomechanical testing. The purpose of this study was to determine if repeated freezing and thawing affected the mechanical properties of canine cortical bone. Six pairs of third-metacarpal bones were tested in three-point bending and six pairs of femurs were tested in torsion. At the time of collection, one member of each pair was tested destructively. The other member was tested nondestructively at the time of collection and after each of five freeze-thaw cycles, followed by destructive testing after the fifth cycle. For destructive tests, the material properties (modulus, maximum stress, maximum strain and absorbed energy) of a specimen at the time of collection were compared to those of the corresponding contralateral specimen that had undergone five freeze-thaw cycles. For repeated nondestructive tests, the modulus of a specimen at the time of collection was compared to modulus of the same specimen at each of the five thaw intervals. During destructive testing, there was a significant (p = 0.02) decrease (20%) in maximum torsional strain. Other changes in bending and torsional destructive properties were not statistically significant. During repeated nondestructive testing, there were solitary significant (p < 0.05) increases (8% and 9%, respectively) in both bending and torsional modulus. However, these isolated changes were not correlated to the number of freeze-thaw cycles. The pattern of alterations in destructive and non-destructive biomechanical properties was most consistent with varying specimen dehydration at each thaw interval. Despite using accepted methods to maintain specimen hydration, repeated freezing, thawing, handling and testing of cortical bone increased the risk of moisture loss. Unless stringent efforts are made to ensure proper hydration, the mechanical properties of canine cortical bone will be altered by repeated freezing and thawing, affecting the results of studies utilizing this technique.The effect of five freeze-thaw cycles on paired canine cortical bone specimens was evaluated using destructive and repeated non-destructive three-point bending and torsion tests. A significant decrease in destructive torsional strain and isolated significant increases in nondestructive bending and torsional modulus were most consistent with varying specimen dehydration at each thaw interval.
APA, Harvard, Vancouver, ISO, and other styles
4

Ibrahim, Yasser E., Nabil Al-Akhras, and Walid Al-Kutti. "Destructive and Nondestructive Testing on Silica Fume Concrete." Advanced Materials Research 919-921 (April 2014): 1890–93. http://dx.doi.org/10.4028/www.scientific.net/amr.919-921.1890.

Full text
Abstract:
Factors such as poor design, bad workmanship and a harsh environment can combine to cause deterioration within a concrete structure leading to visually unacceptable surface cracking or spalling of concrete cover [. In aggressive environments, corrosion of steel reinforcing bars is responsible for major deteriorations in concrete structures. Reduction in bar diameter leads to a lower resistance, which can result in brittle failure of the bar. Initiation and progression of reinforcing steel corrosion can lead to progressive weakening of the structure due to damage accumulation over a period of time, or in sudden catastrophic failures, such as the Berlin Congress Hall, a parking garage in Minnesota [. Antonaci et al. [ conducted an experimental study on different concrete cylinders damaged in compression followed by means of linear and nonlinear ultrasonic methods. Arndt et al. [ tested a concrete slab representing typical bridge decks in order to evaluate the ability of NDT methods to detect different phases of corrosion progression in concrete. Reinforced concrete beam-shaped samples were tested by Aveldano and Ortega [ in order to characterize concrete cracking due to reinforcing corrosion under different environments. Shah and Ribakov [ performed nonlinear ultrasonic testing of cubic concrete specimens with different frequency transducers. Al-Amoudi et al. [ investgated the relatioship between compressive strength of ordinary concrete and blended cement concrete with durability propeties of concrete samples and conculded that the addition of blended cement will improve the performance of concrete in ressiting corrosion of reinforcement. The main objective of this study is to investigate the effectiveness of using nondestructive testing to assess the performance of different types of concrete such as OPC and SFC. Also, to correlate different types of nondestructive testing and to investigate the possibility of capturing the occurrence of corrosion in reinforcing bars in concrete.
APA, Harvard, Vancouver, ISO, and other styles
5

Ngo, Loan T. Q., Yu-Ren Wang, and Yi-Ming Chen. "Applying Adaptive Neural Fuzzy Inference System to Improve Concrete Strength Estimation in Ultrasonic Pulse Velocity Tests." Advances in Civil Engineering 2018 (September 20, 2018): 1–11. http://dx.doi.org/10.1155/2018/2451915.

Full text
Abstract:
When inspecting the property of material, nondestructive testing methods are more preferable than destructive testing since they do not damage the test sample. Nondestructive testing methods, however, might not yield the same accurate results in examining the property of material when compared with destructive testing. To improve the result of nondestructive testing methods, this research applies artificial neural networks and adaptive neural fuzzy inference system in predicting the concrete strength estimation using nondestructive testing method, the ultrasonic pulse velocity test. In this research, data from a total of 312 cylinder concrete samples were collected. Ultrasonic pulse velocity test was applied to those 312 samples in the lab, following the ASTM procedure. Then, the testing results of 312 samples were used to develop and validate two artificial intelligence prediction models. The research results show that artificial intelligence prediction models are more accurate than statistical regression models in terms of the mean absolute percentage error.
APA, Harvard, Vancouver, ISO, and other styles
6

Qu, Zhi, Peng Jiang, and Weixu Zhang. "Development and Application of Infrared Thermography Non-Destructive Testing Techniques." Sensors 20, no. 14 (July 10, 2020): 3851. http://dx.doi.org/10.3390/s20143851.

Full text
Abstract:
Effective testing of defects in various materials is an important guarantee to ensure its safety performance. Compared with traditional non-destructive testing (NDT) methods, infrared thermography is a new NDT technique which has developed rapidly in recent years. Its core technologies include thermal excitation and infrared image processing. In this paper, several main infrared thermography nondestructive testing techniques are reviewed. Through the analysis and comparison of the detection principle, technical characteristics and data processing methods of these testing methods, the development of the infrared thermography nondestructive testing technique is presented. Moreover, the application and development trend are summarized.
APA, Harvard, Vancouver, ISO, and other styles
7

Peta, Katarzyna, Jan Żurek, and Adam Patalas. "Non-destructive testing of automotive heat exchangers." MATEC Web of Conferences 244 (2018): 03007. http://dx.doi.org/10.1051/matecconf/201824403007.

Full text
Abstract:
The paper presents the results of non-destructive testing to the final control of automotive heat exchangers, which must meet a number of technological and exploitative requirements resulting from their working conditions. For the observation of images of heat exchangers, verification of geometrical dimensions and identification of surface and volume defects, the used methods were: computed tomography (highresolution microtomograph Phoenix v|tome|x), three-dimensional optical scanning (3D GOM ATOS III optical scanner), coordinate measuring technique (coordinate measuring machine Hexagon Global Performance 122210). The effectiveness of nondestructive testing in industrial conditions was assessed and the directions of further research in this area were indicated.
APA, Harvard, Vancouver, ISO, and other styles
8

Petriceanu, Constantin Stefan, and Oana Virlan. "Mathematical Modeling of Non-Destructive Testing for Layered Materials." Applied Mechanics and Materials 760 (May 2015): 651–56. http://dx.doi.org/10.4028/www.scientific.net/amm.760.651.

Full text
Abstract:
This article deals with mathematical modeling of non-destructive testing of layered materials. Latest research in the nondestructive control modeling with ultrasound waves recommends, for a greater productivity, the use of layer waves Lamb type due to their properties to propagate in solid materials on long distances without any significant attenuation. In the first part it is shown and justified the usage of the choice of Lamb waves to control this type of material. Then follows the theoretical aspects of the modeling and the simulation of the propagation of Lamb waves in layered materials using the mathematical formalism of wave propagation characterization with a vector of type S called slowness vector. Afterwards the mathematical results are presented with the equation of motion within the considered hypothesis, the hypothesis determined in any point of the space of important acoustic parameters in nondestructive testing (in particular the amplitude of the reflected wave quasi-longitudinal wave) based on the known characteristics of the incipient vector (initial impulse). Then follows validation of the developed model based on some simulations using a specialized software. Finally conclusions are presented and prospects for the development of the method.
APA, Harvard, Vancouver, ISO, and other styles
9

Reese, C. Shane, Paul Deininger, Michael S. Hamada, and Robert Krabill. "Exploring the Statistical Advantages of Nondestructive Evaluation Over Destructive Testing." Journal of Quality Technology 40, no. 3 (July 2008): 259–67. http://dx.doi.org/10.1080/00224065.2008.11917732.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Laura, Patricio A. A. "Nondestructive Testing and Structural Condition Monitoring of Mechanical Cables." Applied Mechanics Reviews 46, no. 4 (April 1, 1993): 133–38. http://dx.doi.org/10.1115/1.3120320.

Full text
Abstract:
This article concerns the problem of evaluating the `structural health’ of cables or ropes by means of non-destructive testing methods. Special emphasis is placed upon electromagnetic techniques and the acoustic emission method.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Nondestructive and destructive testing"

1

Choamnak, Sitdhichai. "Nondestructive and destructive testing of covered timber bridge members." Ohio : Ohio University, 1997. http://www.ohiolink.edu/etd/view.cgi?ohiou1177444570.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Ayra, Behnam. "Structural identification for condition assessment using modal non-destructive test data /." Thesis, Connect to Dissertations & Theses @ Tufts University, 2000.

Find full text
Abstract:
Thesis (Ph.D.)--Tufts University, 2000.
Adviser: Masoud Sanayei. Submitted to the Dept. of Civil Engineering. Includes bibliographical references (leaves 152-159). Access restricted to members of the Tufts University community. Also available via the World Wide Web;
APA, Harvard, Vancouver, ISO, and other styles
3

Rhodes, Patrick Bryan. "Nondestructive assessment of pile tip elevations." Diss., Georgia Institute of Technology, 1996. http://hdl.handle.net/1853/20963.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Jama, Bandile, Jasson Gryzagoridis, and Graham Wilson. "Aspects of thermography for non-destructive testing in mechanical maintenance." Thesis, Cape Peninsula University of Technology, 2017. http://hdl.handle.net/20.500.11838/2579.

Full text
Abstract:
Thesis (MTech (Mechanical Engineering))--Cape Peninsula University of Technology, 2017.
Infrared thermography (IRT) is a non-contacting, non-destructive testing (NDT) technique that provides relatively fast results from inspections; for example, in the detection of defects in engineering components and in systems' condition monitoring. This study examines the use and possible effectiveness of infrared thermography for the detection of faults and defects in just a few aspects that one encounters in the vast mechanical maintenance arena. The study discusses three aspects of infrared thermography, namely internal leaks inspections using passive infrared thermography, pulse thermography and induction thermography both active IRT NDT techniques for the detection of subsurface and surface defects. The promising results that were obtained by performing an experiment in the laboratory using a model fluid handling pipe network, with three isolation valves connected in parallel, encouraged performing inspections in an operating power plant, where it was suspected that there were leaks from safety and drain isolation valves. In both situations, the results were obtained in a short period of time and indicated that passive infrared thermography can detect internal leaks in pipe networks. Pulsed thermography is an active non-contacting non-destructive testing technique used to detect subsurface defects in monolithic materials and delamination's in composites. In the particular experiment that was performed pulse thermography was benchmarked with the conventional technique of ultrasound testing. PVC, stainless steel and mild steel specimens manufactured with flat bottom holes (as models of subsurface defects) were subjected to pulse thermography. The time duration to detect the presence of a defect represented by a temperature contrast or a hot spot on the specimen's surface was approximately a couple of seconds following the thermal excitation. No further characterization of the defect was possible with the technique. In contrast when using the ultrasound testing technique to test the specimens, it took considerable time to detect the defects, however, data in terms of size and depth beneath the surface became available thus enabling their full characterization.
APA, Harvard, Vancouver, ISO, and other styles
5

Mong, Seng Ming. "Non-destructive evaluation with ultrasonic pulse velocity (UPV) in concrete structure." access abstract and table of contents access full-text, 2005. http://libweb.cityu.edu.hk/cgi-bin/ezdb/dissert.pl?msc-ap-b21175032a.pdf.

Full text
Abstract:
Thesis (M.Sc.)--City University of Hong Kong, 2005.
At head of title: City University of Hong Kong, Department of Physics and Materials Science, Master of Science in materials engineering & nanotechnology dissertation. Title from title screen (viewed on Sept. 4, 2006) Includes bibliographical references.
APA, Harvard, Vancouver, ISO, and other styles
6

Lau, Connie K. Y. "Non-destructive evaluation with ultrasonic pulse velocity (UPV) in concrete structure." access abstract and table of contents access full-text, 2005. http://libweb.cityu.edu.hk/cgi-bin/ezdb/dissert.pl?msc-ap-b21174441a.pdf.

Full text
Abstract:
Thesis (M.Sc.)--City University of Hong Kong, 2005.
At head of title: City University of Hong Kong, Department of Physics and Materials Science, Master of Science in materials engineering & nanotechnology dissertation. Title from title screen (viewed on Sept. 1, 2006) Includes bibliographical references.
APA, Harvard, Vancouver, ISO, and other styles
7

Sanderson, Terry. "Thermoelastic modeling of laser generated ultrasound for nondestructive materials testing." Diss., Georgia Institute of Technology, 1997. http://hdl.handle.net/1853/18978.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Gadyuchko, Andrey, and Sören Rosenbaum. "Nondestructive quality inspection of solenoid valves." Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2016. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-200756.

Full text
Abstract:
The presented innovative magnetic testing method utilises the fact, that each commercially available electromagnet can not only be used as an actuator, but also comprises internal sensor functions. This allows a huge application variety in the fields of non-destructive testing and condition monitoring of electromagnetic systems during production and within the application in the field.
APA, Harvard, Vancouver, ISO, and other styles
9

Chan, Tony T. T. "Ultrasonic method of non-destructive test in metals effects of grain size on ultrasound wave at various frequencies /." access abstract and table of contents access full-text, 2006. http://libweb.cityu.edu.hk/cgi-bin/ezdb/dissert.pl?msc-ap-b21456276a.pdf.

Full text
Abstract:
Thesis (M.Sc.)--City University of Hong Kong, 2006.
"Master of Science in Materials Engineering & Nanotechnology dissertation." Title from title screen (viewed on Nov. 21, 2006) Includes bibliographical references.
APA, Harvard, Vancouver, ISO, and other styles
10

Rudraraju, Sridhar. "Fiber optic methods for nondestructive testing." Thesis, This resource online, 1994. http://scholar.lib.vt.edu/theses/available/etd-01102009-063839/.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Nondestructive and destructive testing"

1

Non-destructive testing. 2nd ed. London: E. Arnold, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Non-destructive testing. London: E. Arnold, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Raj, Baldev. Practical nondestructive testing. London: Narosa, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

FEDERAL AVIATION ADMINISTRATION. Nondestructive testing in aircraft. Basin, Wyo: IAP, Inc., 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Hull, Barry. Non-destructive testing. London: Macmillan, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Vernon, John, ed. Non-destructive testing. Basingstoke: Macmillan Education, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Baldev, Raj. Non-destructive testing of welds. New Delhi, India: Narosa Pub. House, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Meola, Carosena. Recent advances in non-destructive inspection. New York: Nova Science Publishers, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Maser, Kenneth R. Non-destructive measurement of pavement layer thickness. Sacramento, CA: California Dept. of Transportation, 2003.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Bray, Don E. Nondestructive testing techniques. New York: Wiley, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Nondestructive and destructive testing"

1

Venkatraman, B., and Baldev Raj. "Nondestructive Testing." In Non-Destructive Evaluation of Corrosion and Corrosion-assisted Cracking, 1–55. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2019. http://dx.doi.org/10.1002/9781118987735.ch1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Groysman, Alec. "Nondestructive Testing and Corrosion Monitoring." In Non-Destructive Evaluation of Corrosion and Corrosion-assisted Cracking, 261–409. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2019. http://dx.doi.org/10.1002/9781118987735.ch9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Dost, Y., N. Apaydın, E. Dedeoğlu, D. K. MacKenzie, and O. Z. Akkol. "Non-Destructive Testing of Bosphorus Bridges." In Nondestructive Testing of Materials and Structures, 819–25. Dordrecht: Springer Netherlands, 2011. http://dx.doi.org/10.1007/978-94-007-0723-8_117.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Ida, Nathan. "Microwave and Millimeter Wave Nondestructive Testing and Evaluation." In Handbook of Advanced Non-Destructive Evaluation, 1–38. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-319-30050-4_59-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Binda, L., L. Cantini, and C. Tedeschi. "Diagnosis of Historic Masonry Structures Using Non-Destructive Techniques." In Nondestructive Testing of Materials and Structures, 1089–102. Dordrecht: Springer Netherlands, 2011. http://dx.doi.org/10.1007/978-94-007-0723-8_152.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Afara, I., T. Sahama, and A. Oloyede. "Near Infrared for Non-Destructive Testing of Articular Cartilage." In Nondestructive Testing of Materials and Structures, 399–404. Dordrecht: Springer Netherlands, 2011. http://dx.doi.org/10.1007/978-94-007-0723-8_58.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Marinier, P., and O. B. Isgor. "Model-Assisted Non-destructive Monitoring of Reinforcement Corrosion in Concrete Structures." In Nondestructive Testing of Materials and Structures, 719–24. Dordrecht: Springer Netherlands, 2011. http://dx.doi.org/10.1007/978-94-007-0723-8_102.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Crawford, K. C. "Non-Destructive Testing of FRP-Structural Systems Applied to Concrete Bridges." In Nondestructive Testing of Materials and Structures, 835–40. Dordrecht: Springer Netherlands, 2011. http://dx.doi.org/10.1007/978-94-007-0723-8_119.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Wichmann, H.-Joachim, H. Budelmann, and A. Holst. "Non-Destructive Measurement of Steel Fiber Dosage and Orientation in Concrete." In Nondestructive Testing of Materials and Structures, 239–45. Dordrecht: Springer Netherlands, 2011. http://dx.doi.org/10.1007/978-94-007-0723-8_35.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Jost, Hendrik, Michael Schwarz, Felix Grossmann, Jonas Sauer, Alexander Hell, and Hans-Georg Herrmann. "Nondestructive and Destructive Testing on Intrinsic Metal-CFRP Hybrids." In Technologies for economic and functional lightweight design, 279–89. Berlin, Heidelberg: Springer Berlin Heidelberg, 2021. http://dx.doi.org/10.1007/978-3-662-62924-6_24.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Nondestructive and destructive testing"

1

Maris, Humphrey J. "Non-Destructive Testing Using Picosecond Ultrasonics." In QUANTITATIVE NONDESTRUCTIVE EVALUATION. AIP, 2006. http://dx.doi.org/10.1063/1.2184531.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Cai, Chun S., Mohsen A. Shahawy, and Adnan El-Saad. "Nondestructive testing of field bridges in Florida." In Non-Destructive Evaluation Techniques for Aging Infrastructure & Manufacturing, edited by Ronald D. Medlock and David C. Laffrey. SPIE, 1998. http://dx.doi.org/10.1117/12.300096.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Choi, J., S. Breugnot, T. Itoh, Donald O. Thompson, and Dale E. Chimenti. "MICROWAVE INTERFEROMETER FOR NON-DESTRUCTIVE TESTING." In REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION VOLUME 29. AIP, 2010. http://dx.doi.org/10.1063/1.3362388.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Blum, T., B. Pouet, S. Breugnot, P. Clémenceau, Donald O. Thompson, and Dale E. Chimenti. "NON-DESTRUCTIVE TESTING USING MULTI-CHANNEL RANDOM-QUADRATURE INTERFEROMETER." In REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION: 34th Annual Review of Progress in Quantitative Nondestructive Evaluation. AIP, 2008. http://dx.doi.org/10.1063/1.2902664.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Marchand, B., F. Vacher, C. Gilles-Pascaud, J. M. Decitre, C. Fermon, Donald O. Thompson, and Dale E. Chimenti. "HIGH RESOLUTION EDDY CURRENT PROBES FOR NON DESTRUCTIVE TESTING." In REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION: 34th Annual Review of Progress in Quantitative Nondestructive Evaluation. AIP, 2008. http://dx.doi.org/10.1063/1.2902675.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Rens, Kevin L., and Taewan Kim. "Quebec Bridge Inspection Using Common Nondestructive and Destructive Testing Techniques." In Structures Congress 2006. Reston, VA: American Society of Civil Engineers, 2006. http://dx.doi.org/10.1061/40889(201)199.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

May, A., and E. Andarawis. "Non-Destructive Testing with Atmospheric Pressure Radio-Frequency Plasma." In REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION. AIP, 2007. http://dx.doi.org/10.1063/1.2718164.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Sikora, R. "Comparison of different measurement configurations for non-destructive testing of well-conducting materials." In QUANTITATIVE NONDESTRUCTIVE EVALUATION. AIP, 2002. http://dx.doi.org/10.1063/1.1473026.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Weil, Gary J. "Nondestructive testing of airport concrete structures: runways, taxiways, roads, bridges, building walls, and roofs." In Non-Destructive Evaluation Techniques for Aging Infrastructure & Manufacturing, edited by Glenn A. Geithman and Gary E. Georgeson. SPIE, 1998. http://dx.doi.org/10.1117/12.305061.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Kohoutek, Richard, and Michael Marix-Evans. "Use of non-destructive testing on semi-rigid connections." In The ninth international symposium on nondestructive characterization of materials. AIP, 1999. http://dx.doi.org/10.1063/1.1302057.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Nondestructive and destructive testing"

1

Snyder, Kenneth A., James R. Clifton, and Nicholas J. Carino. Nondestructive evaluation of the in-place compressive strength of concrete based upon limited destructive testing. Gaithersburg, MD: National Institute of Standards and Technology, 1992. http://dx.doi.org/10.6028/nist.ir.4874.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Bouzekova-Penkova, Anna, and Yordan Mirchev. Destructive and Nondestructive Testing of the Mechanical Properties of Aluminium Alloy Enhanced by Nanodiamond and Tungsten Exposed in the Outer Space. "Prof. Marin Drinov" Publishing House of Bulgarian Academy of Sciences, April 2020. http://dx.doi.org/10.7546/crabs.2020.04.14.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Fleissner, J. G., and M. W. Hume. Comparison of destructive and nondestructive assay of heterogeneous salt residues. Office of Scientific and Technical Information (OSTI), March 1986. http://dx.doi.org/10.2172/6057451.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Mills, Bernice E. Non destructive testing of test objects. Office of Scientific and Technical Information (OSTI), October 2007. http://dx.doi.org/10.2172/926791.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Bruins, Henderikus B. Non Destructive Seal Testing Polymeric Tray. Fort Belvoir, VA: Defense Technical Information Center, October 2006. http://dx.doi.org/10.21236/ada468022.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Wei, T., N. Zavaljevski, S. Bakhtiari, A. Miron, and D. Jupperman. Automated Non-Destructive Testing Array Evaluation System. Office of Scientific and Technical Information (OSTI), December 2004. http://dx.doi.org/10.2172/837752.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Le Bas, Pierre-Yves. Non-Linear Acoustics for Non-Destructive testing. Office of Scientific and Technical Information (OSTI), October 2019. http://dx.doi.org/10.2172/1569728.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

BERNDT, M. L. NON-DESTRUCTIVE TESTING METHODS FOR GEOTHERMAL PIPING. Office of Scientific and Technical Information (OSTI), March 2001. http://dx.doi.org/10.2172/777718.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

McLaughlin, Joanne, Don Di Marzio, Steve Chu, Hugh S. Isaacs, and Gordana D. Adzic. Nondestructive Testing of Corrosion Under Coatings. Fort Belvoir, VA: Defense Technical Information Center, March 2000. http://dx.doi.org/10.21236/ada379677.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Dvorack, Michael A., Thomas J. Kerschen, and Elmer W. Collins. Product acceptance environmental and destructive testing for reliability. Office of Scientific and Technical Information (OSTI), August 2007. http://dx.doi.org/10.2172/920126.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Nondestructive and destructive testing' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography