Books on the topic 'Nickel alloys'

Ulrich, Heubner, ed. Nickel alloys. New York: Marcel Dekker, 1998.

Institute, Nickel, ed. Alloy selection for service in hydrogen fluoride, hydrofluoric acid and fluorine: A guide to the use of nickel-containing alloys. Toronto: Nickel Institute, 2019.

(Canada), Nickel Development Institute, ed. Nickel alloys for electronics. Toronto, Ont., Canada: The Institute, 1987.

Institute, Nickel, ed. Guidelines for the welded fabrication of nickel alloys for corrosion-resistant service: A practical guide for welders, material engineers and design engineers. Toronto: Nickel Institute, 2018.

Ulrich, Heubner, ed. Nickel alloys and high-alloy special stainless steels. Sindelfingen: Expert Verlag, 1987.

Ulrich, Heubner, ed. Nickel alloys and high-alloy special stainless steels. 2nd ed. Renningen-Malmsheim: Expert Verlag, 1998.

Isleib, C. R. Nickel alloys in today's electronics industry. Toronto: Nickel Development Institute, 1987.

R, Davis J., and ASM International. Handbook Committee., eds. Nickel, cobalt, and their alloys. Materials Park, OH: ASM International, 2000.

Allison, J. E. Fe-Ni-Cr alloys for coatings and electroforms. Pittsburgh, PA: U.S. Dept. of the Interior, Bureau of Mines, 1989.

Allison, J. E. Fe-Ni-Cr alloys for coatings and electroforms. Washington, DC: Dept. of the Interior, 1989.

Gendron, T. S. Irreversible embrittlement of alloy 600 in hydrogenated steam at 400 [degrees] C. Chalk River, Ont: System Chemistry and Corrosion Branch, Chalk River Laboratories, 1994.

Rahoi, Dennis W. Alloy 400 for use in high pressure feedwater heaters. Toronto, Ont: Nickel Development Institute, 1993.

Mwansa, Emmanuel. The electrodeposition of nickel-molybdenum alloys. Birmingham: University of Birmingham, 1989.

1949-, Nash P., and ASM International, eds. Phase diagrams of binary nickel alloys. Materials Park, OH: ASM International, 1991.

Lippold, John C. Welding metallurgy and weldability of nickel-base alloys. Hoboken, N.J: John Wiley & Sons, 2009.

United States. National Aeronautics and Space Administration., ed. The influence of chromium on structure and mechanical properties of B2 nickel aluminide alloys. [Washington, DC]: National Aeronautics and Space Administration, 1992.

United States. National Aeronautics and Space Administration., ed. The influence of chromium on structure and mechanical properties of B2 nickel aluminide alloys. [Washington, DC]: National Aeronautics and Space Administration, 1992.

United States. National Aeronautics and Space Administration., ed. Yielding and deformation behavior of the single crystal nickel-base superalloy PWA 1480. [Washington, DC]: National Aeronautics and Space Administration, 1986.

Doane, D. V. Modern carburized nickel alloy steels. Toronto, Ont: Nickel Development Institute, 1990.

Ulʹi͡anin, E. A. Vysokolegirovannye korrozionnostoĭkie splavy. Moskva: "Metallurgii͡a", 1987.

Ellis, David L. Hot corrosion of the B2 nickel aluminides. [Washington, DC]: National Aeronautics and Space Administration, 1993.

Farrar, J. C. M. The alloy tree: A guide to low-alloy steels, stainless steels and nickel-base alloys. Cambridge: Woodhead, 2004.

Stephen, Lamb, and Bringas John E. 1953-, eds. CASTI handbook of stainless steels & nickel alloys. 2nd ed. Edmonton: CASTI Pub., 2002.

author, Giler Roger, and Nickel Development Institute (Canada), eds. Nickel-chromium alloys for electric resistance heating. Toronto, Ont: Nickel Development Institute, 1990.

Greaves, Mark Stephen. Directional recrystallisation of wrought nickel base alloys. Birmingham: University of Birmingham, 1992.

1953-, Bringas John E., and Lamb Stephen, eds. CASTI handbook of stainless steels & nickel alloys. Edmonton, Alberta, Canada: CASTI Publishing Ic., 1999.

Center, NASA Glenn Research, ed. Dual microstructure heat treatment of a nickel-base disk alloy. [Cleveland, Ohio]: National Aeronautics and Space Administration, Glenn Research Center, 2001.

Avery, Richard E. Nickel-containing materials for water control applications. Toronto, Ont.]: Nickel Development Institute, 1993.

D, Aggarwal M., and George C. Marshall Space Flight Center., eds. A study of microstructural characteristics of Ni-based superalloys at high temperatures: Final technical report. Normal, Ala: Dept. of Physics, Alabama Agricultural and Mechanical University, 1990.

D, Aggarwal M., and United States. National Aeronautics and Space Administration, eds. A study of microstructural characteristics of Ni-based superalloys at high temperatures: Semi-annual technical report. Normal, Ala: Dept. of Physics, Alabama Agricultural and Mechanical University, 1987.

United States. National Aeronautics and Space Administration., ed. A Study of microstructural characteristics of Ni-based superalloys at high temperatures: Semi-annual technical report. Normal, Ala: Dept. of Physics, Alabama Agricultural and Mechanical University, 1988.

Sreeramesh, Kalluri, McGaw Michael A, and United States. National Aeronautics and Space Administration., eds. The influence of primary and secondary orientations on the elastic response of a nickel-base single-crystal superalloy. [Washington, DC: National Aeronautics and Space Administration, 1993.

United States. National Aeronautics and Space Administration., ed. Electron diffraction evidence for the ordering of excess nickel atoms by relation to stoichiometry in nickel-rich B'-NiAl formation of a nickel-aluminum (Ni2Al) superlattice. Washington, DC: National Aeronautics and Space Administration, 1988.

Harrington, Jonathan D. Nickel stainless steels and high-nickel alloys for flue gas desulfurizsation systems. Toronto, Ont: Nickel Development Institute, 1987.

Harrington, Jonathan D. Nickel stainless steels and high-nickel alloys for flue gas desulfurizsation systems. Toronto, Ont., Canada: The Institute, 1987.

Fairhurst, S. The toxicity of nickel and its inorganic compounds. London: H.M.S.O., 1987.

R, Bowman R., Nathal Michael V, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Program., eds. Physical and mechanical metallurgy of NiAl. [Washington, DC]: National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Program, 1994.

Bransford, J. W. Ignition characteristics of the nickel-based alloy UNS N07001 in pressurized oxygen. Boulder, Colo: U.S. Dept. of Commerce, National Institute of Standards and Technology, 1990.

Yoshiki-Gravelsins, Karen S. The Thermodynamic properties of Ni-Fe-S-O melts. Toronto, Ont: University of Toronto, 1988.

Gi͡unter, V. Ė. Nikelid titana: Medit͡sinskiĭ material novogo pokolenii͡a. Tomsk: NII medit͡sinskikh materialov i implantatov s pami͡atʹi͡u formy Sibirskogo fiziko-tekhnicheskogo instituta pri Tomskom gos. universitete, 2006.

Gérard, Béranger, ed. The iron-nickel alloys: A hundred years after the discovery of invar--. Andover, UK: Intercept Ltd., 1996.

W, Bransford J., and National Institute of Standards and Technology (U.S.), eds. Ignition characteristics of the nickel-based alloy UNS N07718 in pressurized oxygen. Boulder, Colo: U.S. Dept. of Commerce, National Institute of Standards and Technology, 1989.

James, William F. Mechanical properties of inconel 718 and nickel 201 alloys after thermal histories simulating brazing and high temperature service. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1985.

Berkovits, Avraham. Modelling fatigue damage accumulation in nickel base superalloys: Final report. Haifa: Technion-Israel Institute of Technology, Faculty of Aerospace Engineering, 1992.

Institute, Nickel, ed. Alloy selection for service in sulphuric acid: A guide to the use of nickel-containing alloys. Toronto, Ont: Nickel Institute, 2019.

Khoperia, Teimuraz N. Electroless deposition of metals and alloys for new challenges in nanotechnology, electronics and catalysis. Hauppauge, New York: Nova Science Publishers, Inc., 2013.

American Welding Society. Committee on Filler Metals and Allied Materials., American Welding Society. Technical Activities Committee., American Welding Society, and American National Standards Institute, eds. Specification for nickel and nickel-alloy bare welding electrodes and rods. Miami, Fla: American Welding Society, 2005.

Duncan, Adrian. Cracking in the welding of cupro-nickel alloys. Birmingham: University of Aston. Department of Mechanical and Production Engineering, 1985.

Ulʹi͡anin, E. A. Korrozionnostoĭkie splavy na osnove zheleza i nikeli͡a. Moskva: "Metallurgii͡a", 1986.

Symposium on Advanced Technologies for Superalloy Affordability (2000 Nashville, Tenn.). Advanced technologies for superalloy affordability: Proceedings of a symposium. Warrendale, Pa: TMS, 2000.