Dissertations / Theses on the topic 'Network module'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the top 50 dissertations / theses for your research on the topic 'Network module.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.
Naidoo, Vaughn. "Policy Based Network management of legacy network elements in next generation networks for Voice Services." Thesis, University of the Western Cape, 2002. http://etd.uwc.ac.za/index.php?module=etd&action=viewtitle&id=gen8Srv25Nme4_5830_1370595582.
Full textGen-Kuong, Fernando, and Alex Karolys. "Smart Sensor Network System." International Foundation for Telemetering, 1997. http://hdl.handle.net/10150/607534.
Full textThis paper describes a Smart Sensor Network System for applications requiring sensors connected in a multidrop configuration in order to minimize interconnecting cables. The communication protocol was optimized for high speed data collection. The Smart Sensor Network System was developed with the following goals in mind: cost reduction, reliability and performance increase.
Kobo, Hlabishi. "Situation-aware routing for wireless mesh networks with mobile nodes." Thesis, University of the Western Cape, 2012. http://etd.uwc.ac.za/index.php?module=etd&action=viewtitle&id=gen8Srv25Nme4_6647_1370594682.
Full textPersson, Anders. "A TDMA Module for Waterborne Communication with Focus on Clock Synchronization." Thesis, Linköpings universitet, Programvara och system, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-103028.
Full textTan, Hailun Computer Science & Engineering Faculty of Engineering UNSW. "Secure network programming in wireless sensor networks." Awarded By:University of New South Wales. Computer Science & Engineering, 2010. http://handle.unsw.edu.au/1959.4/44835.
Full textZhang, Yuji. "Module-based Analysis of Biological Data for Network Inference and Biomarker Discovery." Diss., Virginia Tech, 2010. http://hdl.handle.net/10919/28482.
Full textPh. D.
Anderson, Mary L. "Design and implementation of a token-ring optic local area network interface module." Thesis, Monterey, California. Naval Postgraduate School, 1989. http://hdl.handle.net/10945/26967.
Full textRoa, Christian Raphael. "Smart Power Module for Distributed Sensor Power Network of an Unmanned Ground Vehicle." Thesis, Virginia Tech, 2014. http://hdl.handle.net/10919/64467.
Full textMaster of Science
Liang, Xiaoyu. "Computational Methods for Cis-Regulatory Module Discovery." Ohio University / OhioLINK, 2010. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1288578177.
Full textHeins, Robert J. "COMMAND CENTER FOR THE SDI DELTA 181 SENSOR MODULE." International Foundation for Telemetering, 1992. http://hdl.handle.net/10150/608917.
Full textAn orbiting sensor module, designed by The Johns Hopkins University Applied Physics Laboratory (JHU/APL), performed a number of significant Strategic Defense Initiative (SDI) Delta 181 program experiments. These experiments required on-orbit command and monitor operations involving a worldwide network of ground facilities. A major component was the sensor module command center (SMCC), which was designed and integrated by JHU/APL. The SMCC, located at Cape Canaveral Air Force Station (CCAFS), connected to a network of Eastern Test Range, Air Force Satellite Control Network (AFSCN), Kennedy Space Center, and Western Test Range assets. The complex nature of the mission presented numerous challenges to the design, integration, and operation of the SMCC. This paper presents a functional overview of SMCC design as well as unique aspects of supporting ground network telemetry and command operation.
Green, Samantha J. "Cost effectiveness analysis of converting a classroom course to a network based instruction module." Thesis, Monterey, Calif. : Springfield, Va. : Naval Postgraduate School ; Available from National Technical Information Service, 1997. http://handle.dtic.mil/100.2/ADA341611.
Full textBarel, Gal [Verfasser]. "Network Propagation with Node Core for Genotype-Phenotype Associations and Module Identification / Gal Barel." Berlin : Freie Universität Berlin, 2021. http://d-nb.info/1228334633/34.
Full textPitaro, Raffaele. "McGiver: Module Classifier using fine tuning Machine Learning techniques." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2019.
Find full textVuza, Xolisa. "Social and technical issues of IP-based multi-modal semi-synchronous communication: rural telehealth communication in South Africa." Thesis, University of the Western Cape, 2005. http://etd.uwc.ac.za/index.php?module=etd&.
Full textKral, Zachary Tyler. "Development of an artificial neural network damage detection module for a structural health monitoring system." Thesis, Wichita State University, 2009. http://hdl.handle.net/10057/2426.
Full textThesis (M.S.)--Wichita State University, College of Engineering, Dept. of Aerospace Engineering
Wu, YanHao. "SIP-based location service provision." Thesis, University of the Western Cape, 2005. http://etd.uwc.ac.za/index.php?module=etd&.
Full textMeeran, Mohammad Tariq. "An analysis of voice over Internet Protocol in wireless mesh networks." Thesis, University of the Western Cape, 2012. http://etd.uwc.ac.za/index.php?module=etd&action=viewtitle&id=gen8Srv25Nme4_8735_1370594169.
Full textThis thesis presents an analysis of the impact of node mobility on the quality of service for voice over Internet Protocol in wireless mesh networks. Voice traffic was simulated on such a mesh 
network to analyze the following performance metrics: delay, jitter, packet loss and throughput. Wireless mesh networks present interesting characteristics such as multi-hop routing, node mobility, and variable coverage that can impact on quality of service. A reasonable deployment scenario for a small organizational network, for either urban or rural deployment, is considered with three wireless mesh network scenarios, each with 26 mesh nodes. In the first scenario, all mesh nodes are stationary. In the second scenario, 10 nodes are mobile and 16 nodes are stationary. 
Finally, in the third scenario, all mesh nodes are mobile. The mesh nodes are simulated to move at a walking speed of 1.3m per second. The results show that node mobility can increase packet 
loss, delay, and jitter. However, the results also show that wireless mesh networks can provide acceptable quality of service, providing that there is little or no background traffic generated by other 
applications. In particular, the results demonstrate that jitter across all scenarios remains within humanacceptable tolerances. It is therefore recommended that voice over Internet Protocol implementations on wireless mesh networks with background traffic be supported by quality of service standards
otherwise they can lead to service delivery failures. On the other hand, voice-only 
esh networks, even with mobile nodes, offer an attractive alternative voice over Internet Protocol platform.
Hellström, Nils. "Fleet Management Services in GSM-modules." Thesis, Linköping University, Department of Electrical Engineering, 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-8539.
Full textThis report studies a low cost hardware platform for Fleet Management Services, FMS. The platform manages vehicle data, positioning and wireless communication. The core of the platform is a new kind of ‘intelligent’ GSM modem, called a GSM module. A GSM module is basically a stripped down mobile phone that allows embedded third party application code and has an IP-stack. The report reviews the modules available on the market today and presents experiences from the implementation of a prototype based on the Aplicom A12 module. The main conclusion is that the concept is feasible though the modules' limited performance must be considered in the design.
Backström, Anders, and Mats Ågesjö. "Design and implementation of a 5GHz radio front-end module." Thesis, Linköping University, Department of Science and Technology, 2004. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-2635.
Full textThe overall goal of this diploma work is to produce a design of a 5 GHz radio frontend using Agilent Advanced Design System (ADS) and then build a working prototype. Using this prototype to determine if RF circuits at 5 GHz can be successfully produced using distributed components on a laminate substrate.
The design process for the radio front-end consists of two stages. In the first stage the distributed components are designed and simulated, and in the second stage all components are merged into a PCB. This PCB is then manufactured and assembled. All measurements on the radio front-end and the test components are made using a network analyser, in order to measure the S-parameters.
This diploma work has resulted in a functional design and prototype, which has proved that designing systems for 5 GHz on a laminate substrate is possible but by no means trivial.
Cui, Hongzhu. "In Silico Edgetic Profiling and Network Analysis of Human Genetic Variants, with an Application to Disease Module Detection." Digital WPI, 2020. https://digitalcommons.wpi.edu/etd-dissertations/596.
Full textSong, Haitao. "Information management in the travel industry: The role and impact of the Internet." Thesis, University of the Western Cape, 2005. http://etd.uwc.ac.za/index.php?module=etd&action=viewtitle&id=init_6662_1178282746.
Full textIn this information age, the Internet has found a role in various industries such as transportation, advertising, etc. The travel industry, in which communication between travellers and travel service providers is a very important component, has as much potential as any other industry to make full use of this new medium. Already, most travel agencies and travel service providers promote their products and services using web sites. Searching for information online is now seen by many people as a way to save time and cost, especially in their travel activities. In order to fully deploy the Internet within the travel industry, understanding the use of the Internet in tourism is critical. This research sets out initially to examine the role and the impact of the Internet in the whole of the travel industry. But in order to define an achievable scope of work and because of its importance in South Africa at this time, tourism within the travel industry was chosen as the focus of the work.
Новоселов, С. П., and О. В. Сичова. "Intelligent Lighting Control and Management System." Thesis, NURE, MC&FPGA, 2019. https://mcfpga.nure.ua/conf/2019-mcfpga/10-35598-mcfpga-2019-009.
Full textQazi, Hasham Ud Din. "Comparative Study of Network Access Control Technologies." Thesis, Linköping University, Department of Computer and Information Science, 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-8971.
Full textThis thesis presents a comparative study of four Network Access Control (NAC) technologies; Trusted Network Connect by the Trusted Computing group, Juniper Networks, Inc.’s Unified Access Control, Microsoft Corp.’s Network Access Protection, and Cisco Systems Inc.’s Network Admission Control. NAC is a vision, which utilizes existing solutions and new technologies to provide assurance that any device connecting to a network policy domain is authenticated and is subject to the network’s policy enforcement. Non-compliant devices are isolated until they have been brought back to a complaint status. We compare the NAC technologies in terms of architectural and functional features they provide.
There is a race of NAC solutions in the marketplace, each claiming their own definition and terminology, making it difficult for customers to adopt such a solution, resulting in much uncertainty. The NAC paradigm can be classified into two categories: the first category embraces open standards; the second follows proprietary standards. By selecting these architectures, we cover a representative set of proprietary and open standards-based NAC technologies.
This study concludes that there is a great need for standardization and interoperability of NAC components and that the four major solution proposals that we studied fall short of the desired interoperability. With standards, customers have the choice to adopt solution components from different vendors, selecting, what is commonly referred to as the best of breed. One example for a standard technology that all four NAC technologies that we studied did adopt is the IEEE’s 802.1X port-based access control technology. It is used to control endpoint device access to the network.
One shortcoming that most NAC architectures (with the exception of Trusted Network Connect) have in common, is the lack of a strong root-of-trust. Without it, clients’ compliance measurements cannot be trusted by the policy server whose task is to assess each client’s policy compliance.
Bergh, Fredrik, and Johan Andersson. "Channel measurement and communication module for the Grand Cooperative Driving Challenge." Thesis, Högskolan i Halmstad, Sektionen för Informationsvetenskap, Data– och Elektroteknik (IDE), 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:hh:diva-15329.
Full textCoAct
Matteuzzi, Tommaso. "Network diffusion methods for omics big bio data analytics and interpretation with application to cancer datasets." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2017. http://amslaurea.unibo.it/13660/.
Full textGléonec, Philip-Dylan. "Design and implementation of power management strategies for long range radio module with energy harvesting." Thesis, Rennes 1, 2019. http://www.theses.fr/2019REN1S017/document.
Full textThe advent of the Internet of Things has enabled the roll-out of a multitude of Wireless Sensor Networks. These networks can be used in various fields, such as agriculture, industry or the smart city, where they facilitate fine optimization of processes. These devices are often powered by primary or rechargeable batteries, which limits their battery life. Moreover, it is sometimes not possible or financially viable to change and/or recharge these batteries. A possible solution is to harvest energy from the environment to power these sensors. But these energy sources are unreliable, and the sensor must be able to prevent the complete depletion of its energy storage. In order to adapt its energy consumption, the node can match its quality of service to its energetical capabilities. Thus, the device can continuously operate without any service interruption. This thesis presents the methods used for the conception of a completely autonomous sensor, powered by energy harvesting and communicating through a long range LoRa network. In order to ensure its power supply, a board has been designed to harvest energy from multiple energy sources simultaneously. A power management software module has then been developed to calculate an energy budget the sensor can use, and to choose the best way to spend this budget over one or multiple tasks. This work has enabled the development of an energy autonomous industrial sensor prototype
Jansen, van Vuuren A., E. Pretorius, and N. Benade. "Catchment management-model evaluation : verifying data for the implementation of the water release module of the WAS program." Interim : Interdisciplinary Journal, Vol 4, Issue 1: Central University of Technology, Free State, Bloemfontein, 2005. http://hdl.handle.net/11462/426.
Full textThe Water Administration System (WAS) is designed to be a management tool for irrigation schemes and water offices that want to manage their water accounts and supply to clients through canal networks, pipelines and rivers. The ultimate aim of WAS is to optimize irrigation water management and minimize management-related distribution losses in irrigation canals. This research project focus on the implementation of the water release module of the WAS program at the Vaalharts irrigation scheme. WAS consists of four modules that are integrated into a single program that can be used on a single PC, a PC network system (in use currently at Vaalharts) or a multi-user environment. These modules can be implemented partially or as a whole, depending on the requirements of the specific scheme or office. The four modules are an administration module, a water request module; water accounts module and a water release module. The first three modules are already implemented at Vaalharts, while module four is implemented only partially. This module links with the water request module and calculates water releases for the main canal and all its branches allowing for lag times and any water losses and accruals. Any researcher in this field should first understand where water comes from and how it will be utilized before any calculations are attempted. Only then manipulation of the release volume can commence. To precisely calculate this water release, accurate data is needed to ensure that the correct volume of water is released into the canal network. This can be done by verifying existing data with field data. To optimize the management of the irrigation scheme the fully implemented WAS program need to be installed and running at the scheme. A series of data and calculation verification needs to be executed. The exercise will show the adequacy and correctness of the available database WAS uses to do the release calculation from. This will ensure improved management of the irrigation scheme, catchment and water resource sustainability. It is planned that the information generated from this project will be used in the compilation of an integrated catchment management information system, currently underway in the school of Civil Engineering and Built Environment at the Central University of Technology, Free State, South Africa.
Abu, Ismam. "Progetto KM3NeT: Sistemi elettronici, network e modello computazionale dell'infrastruttura." Bachelor's thesis, Alma Mater Studiorum - Università di Bologna, 2020. http://amslaurea.unibo.it/21850/.
Full textEngquist, Martin, and Simon Bethdavid. "Communications solution for refugee settlement : Investigation of nRF24L01+ modules for use in a communications network." Thesis, Uppsala universitet, Fasta tillståndets elektronik, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-354704.
Full textOdvina, Cesar A. "An analysis of the initial decision process of organizing the Navy Medical Department's Executive Management Education module conversion to network-based instruction." Thesis, Monterey, Calif. : Springfield, Va. : Naval Postgraduate School ; Available from National Technical Information Service, 1998. http://handle.dtic.mil/100.2/ADA346379.
Full text"June 1998." Thesis advisor(s): James E. Suchan, Thomas R. Hazard. Includes bibliographical references (p. 53-55). Also available online.
Boardman, Anelda Philine. "Assessment of genome visualization tools relevant to HIV genome research: development of a genome browser prototype." Thesis, University of the Western Cape, 2004. http://etd.uwc.ac.za/index.php?module=etd&action=viewtitle&id=gen8Srv25Nme4_3632_1185446929.
Full textOver the past two decades of HIV research, effective vaccine candidates have been elusive. Traditionally viral research has been characterized by a gene -by-gene approach, but in the light of the availability of complete genome sequences and the tractable size of the HIV genome, a genomic approach may improve insight into the biology and epidemiology of this virus. A genomic approach to finding HIV vaccine candidates can be facilitated by the use of genome sequence visualization. Genome browsers have been used extensively by various groups to shed light on the biology and evolution of several organisms including human, mouse, rat, Drosophila and C.elegans. Application of a genome browser to HIV genomes and related annotations can yield insight into forces that drive evolution, identify highly conserved regions as well as regions that yields a strong immune response in patients, and track mutations that appear over the course of infection. Access to graphical representations of such information is bound to support the search for effective HIV vaccine candidates. This study aimed to answer the question of whether a tool or application exists that can be modified to be used as a platform for development of an HIV visualization application and to assess the viability of such an implementation. Existing applications can only be assessed for their suitability as a basis for development of an HIV genome browser once a well-defined set of assessment criteria has been compiled.
Lakay, Elthea Trevolee. "SIP-based content development for wireless mobile devices with delay constraints." Thesis, University of the Western Cape, 2006. http://etd.uwc.ac.za/index.php?module=etd&action=viewtitle&id=gen8Srv25Nme4_9048_1182233050.
Full textSIP is receiving much attention these days and it seems to be the most promising candidate as a signaling protocol for the current and future IP telephony services. Realizing this, there is the obvious need to provide a certain level of quality comparable to the traditional telephone service signalling system. Thus, we identified the major costs of SIP, which were found to be delay and security. This thesis discusses the costs of SIP, the solutions for the major costs, and the development of a low cost SIP application. The literature review of the components used to develop such a service is discussed, the networks in which the SIP is used are outlined, and some SIP applications and services previously designed are discussed. A simulation environment is then designed and implemented for the instant messaging service for wireless devices. This environment simulates the average delay in LAN and WLAN in different scenarios, to analyze in which scenario the system has the lowest costs and delay constraints.
Nkansah-Gyekye, Yaw. "An intelligent vertical handoff decision algorithm in next generation wireless networks." Thesis, University of the Western Cape, 2010. http://etd.uwc.ac.za/index.php?module=etd&action=viewtitle&id=gen8Srv25Nme4_2726_1307443785.
Full textThe objective of the thesis research is to design such vertical handoff decision algorithms in order for mobile field workers and other mobile users equipped with contemporary multimode mobile devices to communicate seamlessly in the NGWN. In order to tackle this research objective, we used fuzzy logic and fuzzy inference systems to design a suitable handoff initiation algorithm that can handle imprecision and uncertainties in data and process multiple vertical handoff initiation parameters (criteria)
used the fuzzy multiple attributes decision making method and context awareness to design a suitable access network selection function that can handle a tradeoff among many handoff metrics including quality of service requirements (such as network conditions and system performance), mobile terminal conditions, power requirements, application types, user preferences, and a price model
used genetic algorithms and simulated annealing to optimise the access network selection function in order to dynamically select the optimal available access network for handoff
and we focused in particular on an interesting use case: vertical handoff decision between mobile WiMAX and UMTS access networks. The implementation of our handoff decision algorithm will provide a network selection mechanism to help mobile users select the best wireless access network among all available wireless access networks, that is, one that provides always best connected services to users.
Jere, Nobert Rangarirai. "Implementation of a rewards based negotiation module for an e commerce platform." Thesis, University of Fort Hare, 2009. http://hdl.handle.net/10353/267.
Full textDehmelt, Chris. "Integration of Smart Sensor Buses into Distributed Data Acquisition Systems." International Foundation for Telemetering, 2005. http://hdl.handle.net/10150/604924.
Full textAs requirements for the amount of test data continues to increase, instrumentation engineers are under pressure to deploy data acquisition systems that reduce the amount of associated wiring and overall system complexity. Smart sensor buses have been long considered as one approach to address this issue by placing the appropriate signal conditioners close to their respective sensors and providing data back over a common bus. However, the inability to adequately synchronize the operation of the sensor bus to the system master, which is required to correlate analog data measurements, has precluded their use. The ongoing development and deployment of smart sensor buses has reached the phase in which integration into a larger data acquisition system environment must be considered. Smart sensor buses, such as IntelliBus™, have their own unique mode of operation based on a pre-determined sampling schedule, which however, is typically asynchronous to the operation of the (master or controller) data acquisition system and must be accounted for when attempting to synchronize the two systems. IRIG Chapter 4 type methods for inserting data into a format, as exemplified by the handling of MIL-STD-1553 data, could be employed, with the disadvantage of eliminating any knowledge as to when a particular measurement was sampled, unless it is time stamped (similar to the time stamping function that is provided to mark receipt of 1553 command words). This can result in excessive time data as each sensor bus can manage a large number of analog sensor inputs and multiple sensor buses must be accommodated by the data acquisition system. The paper provides an example, using the Boeing developed IntelliBus system and the L3 Communications - Telemetry East NetDAS system, of how correlated data can be acquired from a smart sensor bus as a major subsystem component of a larger integrated data acquisition system. The focus will be specifically on how the IntelliBus schedule can be synchronized to that of the NetDAS formatter. Sample formats will be provided along with a description of how a standalone NetDAS stack and an integrated NetDAS-IntelliBus system would be programmed to create the required output, taking into account the unique sampling characteristics of the sensor bus.
Sertier, Anne-Sophie. "L’évolution modulaire des protéines : un point de vue phylogénétique." Thesis, Lyon 1, 2011. http://www.theses.fr/2011LYO10153/document.
Full textThe diversity of life derives mostly from the variety of proteins coded in genomes. How did evolution produce such a tremendous diversity ? The classical theory postulates that this diversity results both from sequence divergence and from the combinatorial arrangements of a few thousand primary protein domain types. However this does not account for the increasing number of entirely unique proteins as found in most genomes.In this thesis, we study the evolution of proteins from the point of view of their domain decomposition and rely on three databases : HOGENOM (homologous protein families), Pfam (manually curated protein domain families) and ProDom (automatically built protein module families). Each protein family from HOGENOM has thus been decomposed into Pfam domains or ProDom modules. We have modelled the evolution of these families using a Bayesian network based on the phylogenetic species tree. In the framework of this model, we can rigorously reconstitute the most likely evolutionary scenarios reflecting the presence or absence of each protein, domain or module in ancestral species. The comparison of these scenarios allows us to analyse the emergence of new proteins in terms of ancestral domains or modules. Pfam analysis suggests that the majority of protein innovations results from rearrangements of ancient domains, in agreement with the classical paradigm of modular protein evolution. However a very significant part of protein diversity is then neglected. On the other hand ProDom analysis suggests that the majority of new proteins have recruited novel protein modules. We discuss the respective biases of Pfam and ProDom underlying these contrasting views. We propose that the emergence of new protein modules may result from a fast turnover of coding sequences and that this module innovation is essential to the emergence of numerous novel proteins throughout evolution
MacPherson, Cameron Ross. "Transcriptional Regulatory Networks in the Mouse Hippocampus." Thesis, University of the Western Cape, 2007. http://etd.uwc.ac.za/index.php?module=etd&action=viewtitle&id=gen8Srv25Nme4_1683_1259931126.
Full text
 
This study utilized large-scale gene expression data to define the regulatory networks of genes expressing in the hippocampus to which multiple disease pathologies may be associated. Specific aims were: ident i fy key regulatory transcription factors (TFs) responsible for observed gene expression patterns, reconstruct transcription regulatory networks, and prioritize likely TFs responsible for anatomically restricted gene expression. Most of the analysis was restricted to the CA3 sub-region of Ammon&rsquo
s horn within the hippocampus. We identified 155 core genes expressing throughout the CA3 sub-region and predicted corresponding TF binding site (TFBS) distributions. Our analysis shows plausible transcription regulatory networks for twelve clusters of co-expressed genes. We demonstrate the validity of the predictions by re-clustering genes based on TFBS distributions and found that genes tend to be correctly assigned to groups of previously identified co-expressing genes with sensitivity of 67.74% and positive predictive value of 100%. Taken together, this study represents one of the first to merge anatomical architecture, expression profiles and transcription regulatory potential on such a large scale in hippocampal sub-anatomy.
Klíma, Jan. "Bezdrátové komunikační moduly pro mikrokontroléry." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-219328.
Full textStröbaek, Joel. "Evaluating the biological relevance of disease consensus modules : An in silico study of IBD pathology using a bioinformatics approach." Thesis, Högskolan i Skövde, Institutionen för biovetenskap, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:his:diva-17412.
Full textJulínek, Pavel. "Měření a modelování pokrytí bezdrátových sítí." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2015. http://www.nusl.cz/ntk/nusl-221257.
Full textJaneček, Vít. "Modul rozšiřující funkcionalitu GDPR řešení." Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2018. http://www.nusl.cz/ntk/nusl-385988.
Full textDivoux, Thierry. "Étude d'un protocole d'application pour systèmes D. N. C. De niveau 2 et de sa mise en oeuvre sur module d'interface programmable." Nancy 1, 1987. http://www.theses.fr/1987NAN10162.
Full textGarraway, James. "Processes and patterns of responsiveness to the world of work in higher education institutions." Thesis, University of the Western Cape, 2007. http://etd.uwc.ac.za/index.php?module=etd&action=viewtitle&id=gen8Srv25Nme4_3721_1256884982.
Full textThe thesis took the general question of responsive curriculum development which meets both the needs of work and those of the academy as its starting point. The rationale for the topic flows out of education policy and societal pressures worldwide which are calling for an ever greater responsiveness from higher education to the workplace in the twenty-first century. Responsiveness to work requires collaborative and integrative work between communities of academic and non-academic practitioners. Differences between knowledge and practices at work and within the academy are broadly acknowledged in the literature, yet the ensuing nature and complexity of interactions between these two communities in curriculum design on the ground is poorly understood. A key point is to recognize that integration as such cannot be the goal
the differences remain, but have to turned into productive collaboration and joint development, for example, of a curriculum.
Sun, Tao. "Carrier Grade Adaptation for an IP-based Multimodal Application Server: Moving the SoftBridge into SLEE." Thesis, University of the Western Cape, 2004. http://etd.uwc.ac.za/index.php?module=etd&action=viewtitle&id=gen8Srv25Nme4_7776_1370594549.
Full textProviding carrier grade characteristics for Internet Protocol (IP) communication applications is a significant problem for IP application providers in order to offer integrated services that span IP 
and telecommunication networks. This thesis addresses the provision of life-cycle management, which is only one carrier grade characteristic, for a SoftBridge application, which is an example of IP communication applications. A SoftBridge provides semi-synchronous multi-modal IP-based communication. The work related to IP-Telecommunication integrated services and the SoftBridge is analyzed with respect to life-cycle management in a literature review. It is suggested to use an Application Server in a Next Generation Network (NGN) to provide life-cyclemanagement functionality for IP-Telecommunication applications. In this thesis, the Application Server is represented by a JAIN Service Logic Execution Environment(JSLEE), in which 
a SoftBridge application can be deployed, activated, deactivated, uninstalled and upgraded online.Two methodologies are applied in this research: exploratory prototyping, which evolves the development of a SoftBridge application, and empirical comparison, which is concerned with the empirical evaluation of a SoftBridge application in terms of carriergrade capabilities. A SoftBridge application called SIMBA 
provides a Deaf Telephony service similar to aprevious Deaf Telephony SoftBridge, However, SIMBA&rsquo
s SoftBridge design and implementation are unique to this thesis. In order to test the life-cycle 
management ability of SIMBA, an empirical evaluation is carried out including the experiments oflife-cycle management and call-processing performance. The final experimental results of the evaluation show that a JSLEE is able to provide life-cycle management for SIMBA without causing a significant decrease in performance. In conclusion, the life-cycle management can be provided 
or a SoftBridge application by using an Application Server such as a JSLEE. Futhermore, the results indicate that 
approach of using Application Server (JSLEE) integration should be 
sufficiently general to provide life cycle management, and indeed other carrier grade capabilities, for other IP communication applications. This allows IP communication applications to be 
 
 
integrated into an NGN.
Wang, Zhanyu. "The design and implementation of a discussion forum module to function within the architectural constraints of an existing Open Source Software (OSS) learning management system (to meet target-user requirements)." Thesis, Peninsula Technikon, 2004. http://hdl.handle.net/20.500.11838/1381.
Full textHigher education and online discussions are an integral part of collaboratively based e-Learning systems. However, there problems can be associated with current online discussion models. For example, it can be easy to set open-ended discussions which attract little participation and to assess contributions can be difficult or time-consuming. Students may not achieve the expected learning outcomes without proper structure and management in online discussions. This paper proposes to design and implement a discussion forum object to function within the architectural constraints of an existing Oss learning management system (to meet target user requirements) that is a web-based environment for online discussions where the facilitator can structure each discussion according to its nature and where learning requirements are using already designed templates.
Sun, Ke. "The design and implementation of an assignment management module to function within the architectural constraints of an existing Open Source Software (OSS) learning management system (to meet target-user requirements)." Thesis, Peninsula Technikon, 2004. http://hdl.handle.net/20.500.11838/1388.
Full textThis document describes the design and implementation of an Assignment Management Module (AMM) to function within the architectural constraints of an eXisting open-source software (OSS) Leaming Management System (LMS). The project is established for Infonmation Technology Department Master Degree Project of the Peninsula Technikon. The Assignment Management Module will be constructed in orders to make it easier to create, mark, and manage assignments and record individual student perfonmances. The design entailed work on different function blocks like a user's authorisation, files uploadfdownload and mailing reminder unit as well as writing and testing of the application code on the intemet/intranet. The development process of the project to explore how to fu lfi11 software engineering methodology in an open-source environment, also presents details of the design architecture and technologies to be used, as well as being mindful of its future directions. The target audience of this document is anyone with an interest in an open-source software project in general, and in a Learning Management System in particular. If the reader has also been a contributor to Learning Management System, and especially to the management of assignments, this document may provide additional value, in that it strives to present a new approach to the understanding of such a module.
Zhang, Na. "The design and implementation of an assessment management module to function within the architectural constraints of an existing Open Source Software (OSS) learning management system (to meet target-user requirements)." Thesis, Peninsula Technikon, 2004. http://hdl.handle.net/20.500.11838/1371.
Full textThis dissertation was written in fulfillment of the requirements for the degree Master of Technology in the Faculty of Information Technology at the Peninsula Technikon in South Africa. The dissertation covers the introduction of the study; the reviews of the case, Free and Open Source Software; the discussion of methodology of software project management in terms of software engineering; the analysis of assessment methods; the techniques of using PHP, MySQL, Apache and CVS; and the implementation of a test module. The research represents the consideration of the problem, namely that there are few free assessment manager programmes that can be used for the quick and efficient deployment of academic assessments. An experimental research method was used to with the aim of solving the above problem. In other words, a test management system module had to be designed and implemented to function within the architectural constraints of a developing Open Source Software (OSS) Learning Management System (LMS), which is called Knowledge Environment for Web-based Learning Next Generation (KEWL.NextGen). The test management system is a module developed on Object-Oriented Programming (OOP) in PHP and MySQL application. The scripts of this test module are written under the KEWL.NextGen' application framework, which is based on a close approximation of model, view and controller (MVC) design III pattem. Now the entire source coding of the test module has been uploaded to Web site http://kngforge.uwc.ac.za. This test module can be used for the creation and management of an online test. It provides facilities to create a new test, and to preview, edit, delete and mark an existing test. Three question types have been achieved, namely multiple-choice, true/false and short answer.
Eriksson, Hannes, and Sollie Ivan Brange. "Wireless IO : A wireless accessory for integration of an Axis Communications camera in a sensor network." Thesis, Högskolan i Halmstad, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:hh:diva-34203.
Full textSahnoun, Mohamed Aymen. "Contribution à la modélisation et au contrôle de trajectoire de Trackers photovoltaïques à haute concentration (HCPV)." Thesis, Paris, ENSAM, 2015. http://www.theses.fr/2015ENAM0043/document.
Full textThis work focuses on improving the accuracy and on reducing the cost of the tracker generating trajectory strategy, in order to maximize the production and to reduce the installation and the maintenance cost of a solar tracker orienting high concentrated photovoltaic modules (HCPV). Initially, we propose a behavioral modeling of the HCPV module mounted on a dual axis tracker in order to study the influence of the tracking performance on the module power production. Then, this simulator can be used to test control strategies and to compare their performance. Firstly, a classical control strategy is implemented in the simulator. It is based on a hybrid control operating an astronomical calculation to follow the sun path, and a sun sensor to correct the tracking error. A sensorless strategy is proposed in this work to reduce the cost of the HCPV tracker control. This strategy is based on a gradient optimization algorithm to generate the tracker trajectory and to catch the sun path. Tested on the simulator, this strategy presents the same accuracy as the classical strategy while being less costly. The last study proposed in this thesis work concerns maximum power point tracking (MPPT) algorithms, in order to respond to a given problem relating to the practical implementation of gradient algorithm. In this context, we propose an original optimization of the P&O MPPT control with a neural network algorithm leading to a significant reduction of the computational cost required to train it. This approach, which is ensuring a good compromise between accuracy and complexity is sufficiently fast to not affect the quality of the evaluation of the gradient
Ondráček, Petr. "Zařízení pro automatické měření voltampérových charakteristik." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2020. http://www.nusl.cz/ntk/nusl-413092.
Full text