Relevant bibliographies by topics / Návrh vstřikovací formy / Dissertations / Theses
To see the other types of publications on this topic, follow the link: Návrh vstřikovací formy.

Dissertations / Theses on the topic 'Návrh vstřikovací formy'

Author: Grafiati
Published: 28 June 2021
Last updated: 2 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 27 dissertations / theses for your research on the topic 'Návrh vstřikovací formy.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Lukeštík, Tomáš. "Výroba Krytu konektoru." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-445176.

Full text
Abstract:
The work presents a proposal for the production of the connector cover by injection molding from amorphous ABS polymer. Based on a literature study of injection technology and calculations, a two-part injection mold with four cavities, equipped with side sliding trolleys, was designed. The mold is composed of standardized components, some of which are modified. An Intec D100 / 380-B injection molding machine was chosen. The work is accompanied by drawing documentation of the assembly of the mold, molding plates and the designed side sliding trolleys.
APA, Harvard, Vancouver, ISO, and other styles
2

Fendrich, Tomáš. "Návrh technologie výroby vstřikovací formy pro přesné lití." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417472.

Full text
Abstract:
The diploma thesis deals with the design and production of an aluminum injection mold for investment casting. The work briefly describes the technology of investment casting together with a description of the types of molds, their internal arrangement and the most commonly used materials. Another part of the work is devoted to the analysis of aluminum molds machining. Emphasis was placed mainly on those operations, that will be used in production of mold. The practical part describes in detail the process of designing the model and mold, as well as the process of designing production technology. The construction is performed using the program SolidWorks, production technology using the program SolidCam. At the end of the work, the mold is assembled and the functionality of the mold is verified by means of test injection and economic evaluation is made.
APA, Harvard, Vancouver, ISO, and other styles
3

Vrátný, Martin. "Návrh technologie výroby závitové koncovky z plastu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-318751.

Full text
Abstract:
This diploma thesis submits a proposal of technology design manufacturing threaded plastic ends. In the first part it deals with literary studies of plastics and plastic injection molding. In the second part is the design of an injection form for the specified component. Part of the practical part is also the right choice of material and the injection mold, which was designed based on the calculations of technological parameters. In the conclusion of this thesis is technical economic evaluation.
APA, Harvard, Vancouver, ISO, and other styles
4

Okurka, David. "Návrh formy na vstřikování plastů s horkým vtokovým systémem." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230565.

Full text
Abstract:
This thesis describes a design of an injection mould for plastic part "Sleeve", that is intended for guiding of sliding door hardware. The part is manufactured from PE-HD, production quantity is 3 000 000 pcs annually. Based on calculations and review of specialized literature the design utilizes hot runners of MH system by Ewicon. The tool is assembled from normalized components by Hasco and an injection press BOY22D was suggested for parts production. Total costs for production of 1 part are 0,26 CZK.
APA, Harvard, Vancouver, ISO, and other styles
5

Nevřivý, Lukáš. "Technologie výroby plastového držáku střešního nosiče." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-241702.

Full text
Abstract:
This master’s thesis focuses on a design of injection mold which is used for manufacturing of a plastic holder of roof rack. The first part includes shape analysis of the holder and explains function of the product as well as specify essential requirements which must be met. The choice of the most suitable manufacturing technology is followed by theoretical part which deals with literature review of plastic materials, technology of injection molding and basics of injection mold designing. Practical part includes overall design of the mold for the holder of roof rack based on technological calculations. Practical part is followed by mold flow analysis simulation showing suitability of designed mold along with selection of suitable injection molding machine based on product construction design and technological process of manufacturing. The conclusion of master’s thesis includes an economical evaluation of proposed manufacturing technology.
APA, Harvard, Vancouver, ISO, and other styles
6

Popelka, Jan. "Návrh technologie výroby závěsu z plastu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2009. http://www.nusl.cz/ntk/nusl-228861.

Full text
Abstract:
The aim of my graduation theses is to work up the literature search of polymer processing. To give a short summary of their structure, characteristic and fabrication technique. Then to make a structural design of injection mold for producing the scheduled aim and motivate this design with requisite calculation for construction of the tool, a choice of injection machine and rundown of injection cycle. At the end of my work is this aim economically reviewed and compared with alternative form of structural design.
APA, Harvard, Vancouver, ISO, and other styles
7

Stránský, Luboš. "Návrh technologie výroby plastové páčky." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230421.

Full text
Abstract:
This thesis describes the design of injection form for production of plastic lever. In the introduction,there is general literary studies of plastics and injection molding technology. Then continues studies of the injection molding machine, injection form or by selecting the gating systém. The practical part is injection mold design which includes a calculation of the injectionparameters, selection of equipment and technical and economic evaluation.
APA, Harvard, Vancouver, ISO, and other styles
8

Březina, Vít. "Návrh technologie výroby plastové základny časovače." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231258.

Full text
Abstract:
This master´s thesis addresses the design of technology manufacturing plastic parts. The first part deals with the study of theoretical properties of plastics and processing applicable to a given problem. In the second part is designed double injection mold with hot runners. The following authentication function by analyzing the injection solution and the work concludes technical and economic assessment of the project.
APA, Harvard, Vancouver, ISO, and other styles
9

Šváb, Petr. "Návrh technologie výroby ozubeného kola z plastu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2009. http://www.nusl.cz/ntk/nusl-228399.

Full text
Abstract:
The publication contains manufacturing technology of injection cog-wheel, manufacturing plastic material specification and technical drawing documentation including injection shapes. Based on technical data of injecting machine the proper manufacturing technology is suggested. Basic evaluation of costs required to manufacture the whole series of injection cog-wheels is also included.
APA, Harvard, Vancouver, ISO, and other styles
10

Vyhnanovský, Jaroslav. "Návrh technologie výroby ozubeného kola z plastu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-231960.

Full text
Abstract:
This project has been developed within the master study of Engineering Technology and Industrial Management a design of manufacturing technology for plastic cogwheel is introduced. The cogwheel will be produced by plastic injection moulding. POM material with a trade name Delrin 100 NC010 from DuPont Company will be used. An injection mould is a tool for producing a plastic cogwheel using injection moulding technology. Production will take place on the machine Allrounder 420 C Golden Edition 1000-290 from Arburg German Company headquartered in Loßburg, where the seat of parent company is situated.
APA, Harvard, Vancouver, ISO, and other styles
11

Hruška, Lukáš. "Návrh na zefektivnění procesu obrábění dílu pro vstřikovací formu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231697.

Full text
Abstract:
The aim of this diploma work was a proposal to make the process of machining of injection mould more efficient. The work described the initial state of machining of a moulding injection part from the technological point of splinter machining, including the description of each production areas, the tool used in the process and the machines. The main part of the diploma work was focused on consideration of a possible way leading to the increase in the efficiency of the production process of machining of an injection mould part that included the transfer of the initial way of machining of a moulding injection part to CNC lathe Gildemeister CTX beta 500. Furthermore the work described the tool that had been used including the description of proposed control programs for machining of an injection mould part. The essential part of the work was a techno-economical assessment of the proposed variant of solution, which included analysis of the production costs and the time indexes that were achieved during the production.
APA, Harvard, Vancouver, ISO, and other styles
12

Kočí, Ivan. "Návrh technologie výroby zátky z plastu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2009. http://www.nusl.cz/ntk/nusl-228882.

Full text
Abstract:
This graduation theses analyse a concept of plastic plug production using the technology of injecting plastic into the form. There is performed a design of the technologic process with necessary calculations included here. Besides that the analysis is also focused on construction of the injection form. For the solution the 3D CAD system by SolidWorks and Hasco, Meusburger, Synventive normals were used. The graduation theses is finally valorized by technological-economic summary.
APA, Harvard, Vancouver, ISO, and other styles
13

Fojtík, Jakub. "Návrh technologie výroby plastového držáku uhlíků." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229917.

Full text
Abstract:
This master thesis deals with design of injection moulding technology for plastic holder of carbon brushes made of polycarbonate labelled Lexan 945A. The injection is performed into injection mould with hot runner system. Initially there is general study related to plastics and injection moulding technology. Further the study continues with injection moulds with hot runners and ends with computer analysis of injection moulding process. The designed injection mould for production of plastic holders is three-plate, double cavity mould with four hot nozzles and one parting plane, where one of the plates serves for mounting of the hot runner system inside the mould. This work contains part of the drawing documentation and item list of the injection mould. The selected injection moulding machine is Arburg Allrounder 370 U labelled 700-290 according to EUROMAP.
APA, Harvard, Vancouver, ISO, and other styles
14

Adamiec, Pavel. "Návrh technologie výroby svorkovnice přístroje z plastu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229918.

Full text
Abstract:
The master thesis deals with design to produce terminal using the plastic injection molding. In the first part are theoretical information about injection molding and injection molding with inserts. The second part is a concrete design of production terminal which contains: injection mold design, calculation of the injection parameters, machine selection, technical and economic evaluation of production. Terminal is made of polyamide 66, inserts material is brass. Parts of injection mold assembly are selected from Hasco standards. The main parts of assembly are made of 1.2312 steel. Production cycle is placed on injection machine Allrounder 375 V from Arburg.
APA, Harvard, Vancouver, ISO, and other styles
15

Nosek, Jan. "Návrh technologie výroby tělesa světlometu motocyklu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-229143.

Full text
Abstract:
The thesis is a proposal technology of the main body of motorcycle polymer material from Bayer's APEC - high temperature polycarbonate 1703. Literary study summarizes findings from a thermoplastic injection molding technology and the possibilities of structural design of injection molds, plastic plating technology from a focus on the most important technology in the field of lighting technology vehicles. Given the anticipated production run of 50 thousand. pieces are assessed a total of 2 variants of the molding parts. The practical part was modeled and specified product designed mold. Construction was done by using SolidWorks 2007 software and normalities FCPK Bytów and HASCO. For the selected option is implemented technological calculations. For the proposed technology was chosen Allrounder injection molding machine 570 A the manufacturer Arburg designed and suitable technological process of production.
APA, Harvard, Vancouver, ISO, and other styles
16

Gráf, Radomír. "Návrh technologie výroby plastového programového kotouče." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230863.

Full text
Abstract:
This thesis is concerned with the appropriate design of manufacturing technology for plastic program disc including the design of plastic printing technology. At the beginning of this thesis was made an analysis of requirements for manufactured device including selection of the most appropriate technology for its manufacturing – plastic injection. In the theoretical part are described all skills needed for designing and construction of the injection mould. Partial theoretical parts are concerned with the issue of plastic materials, tools and engines for injection, and of plastic printing technology. Practical part is concerned with description of design of each single system inside the injection mould including calculation. On the basis of these calculations was selected the appropriate injection engine. The end of the practical part is concerned with the selection of the appropriate engine for printing on the plastic device which is manufactured by the technology of plastic injection. For construction of the injection mould were applied normalities of the Hasco Company and the 3D CAD system Solidworks. The conclusion of this thesis achieves the technical- economical evaluation for manufacturing of designed plastic device.
APA, Harvard, Vancouver, ISO, and other styles
17

Žváček, Michal. "Automatize návrhu jednoduchých vstřikovacích forem pro nástrojárny." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-228174.

Full text
Abstract:
The dissertation is concerned with automatization proposal of simple injection moulds for plastics. The dissertation is concentrating on the process of CAD design with the aim of make it more effective and automate by the help of 3D parametric strickle board of moulds. It serves for rapid proposal of basic mechanism of the tools. Strickle board of the mould is managed by length of side moulding plate in required range from 300 to the 700mm. For managing of standardized parts was created web portal, which includes database of single parts. These parts can be simply insert to the groups of moulds by the help of hypertext links in software Catia V5. Dissertation includes description of whole system automatization and matching of the new way of CAD design with the original.
APA, Harvard, Vancouver, ISO, and other styles
18

Petrucha, Roman. "Návrh technologie výroby šnekového soukolí z plastu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-318849.

Full text
Abstract:
The master thesis deals with the design of the injection mold for the production of a plastic two-part worm which is part of the worm gear set in the sleeve. From the beginning, an analysis of the assigned component was performed, specifying its function and specifying the criteria that must be met by the component. In addition, design of the production technology (injection molding) was carried out, followed by theoretical analysis of plastic materials, injection molding technology and mold design. Subsequently, in the practical part, a complete design of the injection mold was made on the basis of simulations and technological calculations. On the basis of the parameters of the injection mold, a machine was chosen, on which production should be carried out according to the proposed technological procedure. The conclusion of the thesis contains a technical and economic evaluation of the proposed technology for the production of Plastics splatter component.
APA, Harvard, Vancouver, ISO, and other styles
19

Hrdina, Vojtěch. "Výroba rohové krytky." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417172.

Full text
Abstract:
The project elaborated design of injection mould for production of corner cover, which serves to protect a reprobox from mechanical damage. The production possibilities were considered at the beginning. The injection molding technology was chosen from available technologies. The first part of the thesis is theoretic, plastics and injection molding are investigated. The choice of suitable polymer and the entire draft of mold is in the second part of thesis. The final mold is two-cavity with cold runner system. The technical and economic assessment of the proposal is carried out in the last part of thesis.
APA, Harvard, Vancouver, ISO, and other styles
20

Kočárek, Karel. "Návrh technologie výroby plastového krytu elektropřístroje." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-231100.

Full text
Abstract:
This thesis contains of theoretical part which deals with injection molding, properties of some polymer materials are included also. Design of plastic injection mold for cover of electronic device is presented in practical part. Manufacturing parameters and injection machine selection are specified with mold structure consideration. Production costs and the final price of the plastic part are calculated in economical evaluation.
APA, Harvard, Vancouver, ISO, and other styles
21

Hovad, Jan. "Návrh technologie výroby plastového krytu vrtačky." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231261.

Full text
Abstract:
This thesis contains literary studies about plastics and injection of plastics including tools for the injection. Practical part of the thesis is focused on design manufacturing of plastic cover of drill. Manufacturing parameters, design construction of injection form, selected injection machine and technical economic evaluation are solved within the manufacturing proposal.
APA, Harvard, Vancouver, ISO, and other styles
22

Pytlík, Radek. "Návrh technologie výroby tělesa světlometu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-231961.

Full text
Abstract:
The project developed within the Master's degree is proposing a technology of manufacturing a headlight housing from the high temperature polycarbonate Apec 1695 with wall thickness of 1.8 mm. The batch size is set at 100,000 units / year. Based on literature studies of injection moulding and also on the calculation method, the injection moulding tool with the heated injector has been proposed. The injection moulding machine Allrounder 630 S 2500-800 from Arburg is used for the production of the plastic headlight housing.
APA, Harvard, Vancouver, ISO, and other styles
23

Adamec, Lukáš. "Návrh technologie výroby plastové páčky." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2009. http://www.nusl.cz/ntk/nusl-228847.

Full text
Abstract:
The aim of this project is to design the most suitable technology for manufacturing of the set component. The project contains theoretical and practical part. The theoretical part deals with division of polymer material and the description of the technology suitable for production of the set component. The practical part concentrates on the mould design of the set component including calculations and needed technological parameters of injection moulding operation.
APA, Harvard, Vancouver, ISO, and other styles
24

Vejborný, Václav. "Konstrukční a technologický návrh plastových dílů na motocykl Blata 125." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-377363.

Full text
Abstract:
This thesis solves actual engineering tasks from the field of motorcycle industry. The first part describes the design of several plastic parts for Czech motorcycle Blata125. The design of injection moulds for selected parts is described in second part of the thesis.
APA, Harvard, Vancouver, ISO, and other styles
25

Kuchař, Petr. "Aplikace CAD/CAM softwaru WorkNC při obrábění." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-400955.

Full text
Abstract:
The aim of this thesis was to design core and cavity part of the injection moulding tool with regard to the possibilities of SKD Bojkovice company. The structure of the thesis was divided into two main parts - the theoretical part, where the necessary theory for the elaboration of the second part, the practical one was briefly introduced. In the practical part own plastic component was designed, constructed an injection mold with emphasis on the core and cavity parts of the injection moulding tool and produced the necessary production documentation. Subsequently, the process of manufacturing these parts of the mold was described, and a brief technical-economic evaluation of the manufacturing process took place at the very end.
APA, Harvard, Vancouver, ISO, and other styles
26

Šobáň, Jakub. "Technologie výroby plastové součásti pro automobilový průmysl." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-416435.

Full text
Abstract:
The diploma thesis presents a production technology design of an automotive industry component – a resonator holder. The initial production run of the part is 500 000 pcs. Injection production has been selected based on variant analysis of available technologies. Technological calculations have been performed. The selected material PP 56M10 will be used for operation in granules. A quadruple shaped cavity injection mold with a tunnel gate has been designed. Based on estimated technological properties an Arburg Allrounder 470 A machine has been selected. The break-even point (BEP) shows economic return at the production of 185 595 pcs.
APA, Harvard, Vancouver, ISO, and other styles
27

ČÍŽEK, Václav. "Návrh a výroba plastové součásti." Master's thesis, 2013. http://www.nusl.cz/ntk/nusl-135747.

Full text
Abstract:
The theoretical part is focused on evaluation of chosen ?essential? plastics used in the car industry. The principles of construction and proportioning of plastic components, basic conception of injection moulding and measuration follow. Another section of the theoretical part presents a summary of possible CAD systems, which are used. The practical part is focused on a particular plastic moulding. It includes the main description of a component with its material choice in dependence on the component function. Another section contains evaluation of the component complexity from the viewpoint of moulding, and a possible substitution of constructions, which could be productively simpler, is shown. The whole thesis is completed for better lucidity by pictures, drawings, and mechanical drawings.
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography