Relevant bibliographies by topics / Návrh vstřikovací formy

Contents

  1. Dissertations / Theses

Academic literature on the topic 'Návrh vstřikovací formy'

Author: Grafiati
Published: 28 June 2021
Last updated: 2 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Návrh vstřikovací formy.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Dissertations / Theses on the topic "Návrh vstřikovací formy"

1

Lukeštík, Tomáš. "Výroba Krytu konektoru." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-445176.

Full text
Abstract:
The work presents a proposal for the production of the connector cover by injection molding from amorphous ABS polymer. Based on a literature study of injection technology and calculations, a two-part injection mold with four cavities, equipped with side sliding trolleys, was designed. The mold is composed of standardized components, some of which are modified. An Intec D100 / 380-B injection molding machine was chosen. The work is accompanied by drawing documentation of the assembly of the mold, molding plates and the designed side sliding trolleys.
APA, Harvard, Vancouver, ISO, and other styles
2

Fendrich, Tomáš. "Návrh technologie výroby vstřikovací formy pro přesné lití." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417472.

Full text
Abstract:
The diploma thesis deals with the design and production of an aluminum injection mold for investment casting. The work briefly describes the technology of investment casting together with a description of the types of molds, their internal arrangement and the most commonly used materials. Another part of the work is devoted to the analysis of aluminum molds machining. Emphasis was placed mainly on those operations, that will be used in production of mold. The practical part describes in detail the process of designing the model and mold, as well as the process of designing production technology. The construction is performed using the program SolidWorks, production technology using the program SolidCam. At the end of the work, the mold is assembled and the functionality of the mold is verified by means of test injection and economic evaluation is made.
APA, Harvard, Vancouver, ISO, and other styles
3

Vrátný, Martin. "Návrh technologie výroby závitové koncovky z plastu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-318751.

Full text
Abstract:
This diploma thesis submits a proposal of technology design manufacturing threaded plastic ends. In the first part it deals with literary studies of plastics and plastic injection molding. In the second part is the design of an injection form for the specified component. Part of the practical part is also the right choice of material and the injection mold, which was designed based on the calculations of technological parameters. In the conclusion of this thesis is technical economic evaluation.
APA, Harvard, Vancouver, ISO, and other styles
4

Okurka, David. "Návrh formy na vstřikování plastů s horkým vtokovým systémem." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230565.

Full text
Abstract:
This thesis describes a design of an injection mould for plastic part "Sleeve", that is intended for guiding of sliding door hardware. The part is manufactured from PE-HD, production quantity is 3 000 000 pcs annually. Based on calculations and review of specialized literature the design utilizes hot runners of MH system by Ewicon. The tool is assembled from normalized components by Hasco and an injection press BOY22D was suggested for parts production. Total costs for production of 1 part are 0,26 CZK.
APA, Harvard, Vancouver, ISO, and other styles
5

Nevřivý, Lukáš. "Technologie výroby plastového držáku střešního nosiče." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-241702.

Full text
Abstract:
This master’s thesis focuses on a design of injection mold which is used for manufacturing of a plastic holder of roof rack. The first part includes shape analysis of the holder and explains function of the product as well as specify essential requirements which must be met. The choice of the most suitable manufacturing technology is followed by theoretical part which deals with literature review of plastic materials, technology of injection molding and basics of injection mold designing. Practical part includes overall design of the mold for the holder of roof rack based on technological calculations. Practical part is followed by mold flow analysis simulation showing suitability of designed mold along with selection of suitable injection molding machine based on product construction design and technological process of manufacturing. The conclusion of master’s thesis includes an economical evaluation of proposed manufacturing technology.
APA, Harvard, Vancouver, ISO, and other styles
6

Popelka, Jan. "Návrh technologie výroby závěsu z plastu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2009. http://www.nusl.cz/ntk/nusl-228861.

Full text
Abstract:
The aim of my graduation theses is to work up the literature search of polymer processing. To give a short summary of their structure, characteristic and fabrication technique. Then to make a structural design of injection mold for producing the scheduled aim and motivate this design with requisite calculation for construction of the tool, a choice of injection machine and rundown of injection cycle. At the end of my work is this aim economically reviewed and compared with alternative form of structural design.
APA, Harvard, Vancouver, ISO, and other styles
7

Stránský, Luboš. "Návrh technologie výroby plastové páčky." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230421.

Full text
Abstract:
This thesis describes the design of injection form for production of plastic lever. In the introduction,there is general literary studies of plastics and injection molding technology. Then continues studies of the injection molding machine, injection form or by selecting the gating systém. The practical part is injection mold design which includes a calculation of the injectionparameters, selection of equipment and technical and economic evaluation.
APA, Harvard, Vancouver, ISO, and other styles
8

Březina, Vít. "Návrh technologie výroby plastové základny časovače." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231258.

Full text
Abstract:
This master´s thesis addresses the design of technology manufacturing plastic parts. The first part deals with the study of theoretical properties of plastics and processing applicable to a given problem. In the second part is designed double injection mold with hot runners. The following authentication function by analyzing the injection solution and the work concludes technical and economic assessment of the project.
APA, Harvard, Vancouver, ISO, and other styles
9

Šváb, Petr. "Návrh technologie výroby ozubeného kola z plastu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2009. http://www.nusl.cz/ntk/nusl-228399.

Full text
Abstract:
The publication contains manufacturing technology of injection cog-wheel, manufacturing plastic material specification and technical drawing documentation including injection shapes. Based on technical data of injecting machine the proper manufacturing technology is suggested. Basic evaluation of costs required to manufacture the whole series of injection cog-wheels is also included.
APA, Harvard, Vancouver, ISO, and other styles
10

Vyhnanovský, Jaroslav. "Návrh technologie výroby ozubeného kola z plastu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-231960.

Full text
Abstract:
This project has been developed within the master study of Engineering Technology and Industrial Management a design of manufacturing technology for plastic cogwheel is introduced. The cogwheel will be produced by plastic injection moulding. POM material with a trade name Delrin 100 NC010 from DuPont Company will be used. An injection mould is a tool for producing a plastic cogwheel using injection moulding technology. Production will take place on the machine Allrounder 420 C Golden Edition 1000-290 from Arburg German Company headquartered in Loßburg, where the seat of parent company is situated.
APA, Harvard, Vancouver, ISO, and other styles
More sources
You might also be interested in the extended bibliographies on the topic 'Návrh vstřikovací formy' for particular source types:
Dissertations / Theses
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography