Relevant bibliographies by topics / Návrh větrání / Dissertations / Theses
To see the other types of publications on this topic, follow the link: Návrh větrání.

Dissertations / Theses on the topic 'Návrh větrání'

Author: Grafiati
Published: 28 June 2021
Last updated: 7 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 32 dissertations / theses for your research on the topic 'Návrh větrání.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Vrubl, David. "Návrh větrání čistého prostoru mikrobiologické laboratoře." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-228354.

Full text
Abstract:
The diploma thesis conversant problem of ventilation clean rooms of microbiological laboratory. Clean rooms pose enhanced requirements on quality distributed air, air filtrating, noisiness, humidity, stream velocity, temperature and quarantee requirement overpressures. Practical part is attention paid to solvent project solution airconditioning clean rooms of microbiological laboratory, completion need of calculations and dispose scheme of air conditioning
APA, Harvard, Vancouver, ISO, and other styles
2

Křenek, Ondřej. "Návrh větrání jednoho podlaží nemocniční budovy." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2009. http://www.nusl.cz/ntk/nusl-228869.

Full text
Abstract:
The diploma thesis is focused on the design of air-conditioning systems for two operating theatres and their auxiliary facilities. An introduction to ventilation of clean rooms and other indoor environments with special requirements on environmental conditions and air cleanliness is given at the beginning of the thesis. The thesis contains calculations and proposed design solution of the air-conditioning systems. The calculations include determination of the air flow rates of air supplied into the ventilated spaces, heating and cooling loads of the operation theatres, the psychometric calculations for summer and winter operational conditions and sizing of equipment, piping and ductworks. The design part also includes air distribution elements, pipeline and ductwork routing and packaged air-handling units. The complete drawing documentation is also included in the thesis.
APA, Harvard, Vancouver, ISO, and other styles
3

Kundrát, Roman. "Návrh vzduchotechniky pro ukázkovou laboratoř větrání." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230411.

Full text
Abstract:
Objective of this thesis is the design of ventilation system for demonstration laboratory. Based on literature studies, experience and advice of experts is at work introduced the concept of design of ventilation equipment for laboratory, which will serve to demonstrate the air inlet into the room using different diffusers. Introduction of distribution elements for ventilation, priors the actual design of laboratory.
APA, Harvard, Vancouver, ISO, and other styles
4

Kicko, Peter. "Návrh větrání laboratoře pro přípravu cytostatik." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230869.

Full text
Abstract:
The main goal of this thesis is an introducing and guiding the reader with all important aspects of a proposal of ventilation system for cytostatics laboratory, from theoretical knowledge about the issue via familiarization with an appropriate legislative statute, a demonstration of relevant calculations needed for the project, a proposal in the form of technical reports as well. In this thesis the process of validation, which is needed for installed technology in the cleanroom, is also described. The thesis is supported by drawing documentation of real ventilation project for cytostatics laboratory, which follows the aforementioned technical report and calculations.
APA, Harvard, Vancouver, ISO, and other styles
5

Tichý, David. "Návrh větrání čistého pracoviště pro elektrotechnický průmysl." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-227867.

Full text
Abstract:
The work describes an air conditioning and circulation system of a clean room environment in of a semiconductor production site. It is based on given requirements for air cleanness, temperature preasure and relative moisture. The first half of the work describes the way the system should work, classification of construction and operation of the site. The second half describes the calculations of the given parameters on which the system is designed. The calculations deal with - Air exchange and maintaining the required parameters - Designing the muti stage air filtration system - Designing the air flow speed, intake and outlet parameters of the air conditiong distribution system - Desingning the air conditioning units and their possitioning in the utility room
APA, Harvard, Vancouver, ISO, and other styles
6

Koutník, Martin. "Návrh teplovzdušného vytápění a větrání nízkoenergetického domku." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-228142.

Full text
Abstract:
The diploma thesis deals with design of warm air heating and ventilating system for low energy house. Introduction of this thesis is focused on dividing residential buildings by their heat requirement. Then problems of residential building ventilation and possibilities of warm air heating systems including heat recovery are presented. In the next chapter summary of ventilating units with heat recovery and warm air heating units for residential low energy buildings and pasive family houses is presented. Calculation of low energy house heat losses, which is solved, is based on CSN 06 0210, CSN 73 0540 and CSN EN 12831 standards. Design and calculation of warm air heating and ventilation system and ground heat exchangers is also described. Floor heating system, fireplace insert and solar heating system are designed as supplementary systems. At the end of this thesis the control system is presented. Project documentation is enclosed in appendix.
APA, Harvard, Vancouver, ISO, and other styles
7

Brázda, Jan. "Návrh vytápění a větrání pro „Emotivní dům“." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-318833.

Full text
Abstract:
This master’s thesis deals with the design of the heating and ventilation system for the ‘Emotivní dům’ which was designed by the author of this thesis. The first part of the thesis provides an overview of the project and the architectural design of the house. In the next part, the calculation of the heat loss and the design of the heating and ventilation system is described. War-air heating/ventilation is used in in the habitable rooms of the house with the hydronic system utilized in other spaces. The floor heating is used in the bathrooms and the other non-habitable spaces, such as the garage, are heated with radiators. A natural gas boiler is used as a heat source for both space heating and domestic hot water heating. The thesis contains the floor plans of the house as well as technical drawings of the heating and ventilation system.
APA, Harvard, Vancouver, ISO, and other styles
8

Hrabánek, Radek. "Návrh individuálního větrání bytu s rekuperací tepla." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230362.

Full text
Abstract:
The diploma thesis is consisting of theoretic part, which deals with used ventilating systems, describes basic types of air-conditioning systems and basic characteristics and diversification of radiant cooling systems. Following part attend to design of ventilating system and radiant cooling system for cooling of the flat. Design of the ventilation systém is based on minimum air flow per person. Design of the radiant cooling system is based on calculation of thermal loads. Design documentation is part of the diploma thesis as well as the calculations made in excel.
APA, Harvard, Vancouver, ISO, and other styles
9

Bíza, Michal. "Návrh větrání a chlazení v rodinném domě." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-399577.

Full text
Abstract:
The diploma thesis is focused on the design of ventilation and cooling for the family house. The first part of the thesis deals with possibilities of ventilation and cooling, air ducts and their components and selected ventilation units. The next part deals with the analysis of air-conditioning routes, their dimensions and pressure losses. Then the heat gain is determined, and cooling is proposed. The last part deals with the comparison of financial costs for purchase of all components for ventilation and cooling, assembly, installation and operating costs. The enclosed drawings and item lists are at the end of the thesis.
APA, Harvard, Vancouver, ISO, and other styles
10

Bareš, Josef. "Návrh větrání a chlazení v rodinném domě." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417131.

Full text
Abstract:
The diploma thesis is focused on a ventilation and cooling design of a family house. Author’s idea was to make summary of theoretical information and project documentation for realization (installation) of the ventilation and cooling. Introduction of the house disposition, theoretical research of a current cooling and ventilation options in residential buildings are parts of this thesis. Next it contains thermal load calculation, two designs of a cooling and three designs of a forced ventilation, dimensioning of the pipelines and financial cost comparison of a purchase, assembly, working and service of a designed systems.
APA, Harvard, Vancouver, ISO, and other styles
11

Nejerál, Michal. "Návrh vytápění a větrání pro rekonstruovaný rodinný dům." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-442840.

Full text
Abstract:
The main goal of the diploma thesis is to design a new ventilation and heating system in an old house after its reconstruction. The design also includes consideration of the possibility of using renewable resources. A central heat recovery ventilation systém is designed to ensure ventilation of the building. The heating design is based on two independent heat sources. It is a wood boiler and a gas condensing boiler. After considering renewable sources, a photovoltaic system is designed. The results of individual calculations and drawing documentation of designs are also attached.
APA, Harvard, Vancouver, ISO, and other styles
12

Čoček, Bedřich. "Návrh větrání a vytápění rekonstruované části hospodářské usedlosti." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-241885.

Full text
Abstract:
The aim of thesis is to design the heating and ventilation system for reconstructed part of the farmhouse. Thesis contains calculation of the object heat output, from which the design of the heating system is based. This includes to choice of heat sources, heaters and others components of the system. Thesis also contains hydraulic regulation of heating system. Design of equal-pressure ventilation system includes calculation of required amount of air, choice of unit, air conduit draft and options of terminal components and their settings. In the framework of this thesis is also designed simple photovoltaic system for warming hot water. There was created relevant drawing documentation for design of systems.
APA, Harvard, Vancouver, ISO, and other styles
13

Niemczyk, Roman. "Návrh vytápění a větrání dřevěné roubenky v podhorské oblasti." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-442826.

Full text
Abstract:
This master´s thesis deals with calculations of heat losses, design of ventilation and heating of a two-storey family house. Part of the thesis is the characteristics and description of the building, calculation of heat losses according to the standard ČSN EN 12831-1. Furthermore, the heating system is designed, including the choice of heat sources, calculation of underfloor heating and pressure losses. Subsequently, forced ventilation is proposed with heat recovery. The last part assesses the possibility of using a photovoltaic system for the object. Relevant technical documentation is also prepared for the proposals.
APA, Harvard, Vancouver, ISO, and other styles
14

Jirsová, Tereza. "Návrh vytápění a nuceného větrání pro rodinný dům Doubrava." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-442839.

Full text
Abstract:
The diploma thesis is focused on the design of heating and forced ventilation for the project of the family house Doubrava. In the first two chapters is briefly described the theory and there is also described the project of the family house. The next chapter deals with the design of the forced equal pressure ventilation with the heat and moisture recovery. Than the heat loss are calculated according to the norm ČSN EN 12831-1. The next part is focused on the design of heating system and the heat source for the family house Doubrava. There is described detailed design of the floor heating, including necessary calculations, and also the type of the heat pump, as the heat source and source for hot water heating, is chosen. This part also contains a selection of expansion tank and safety valve and approximate calculation of the size of the primar circuit. The last part deals with the possibilities of using renewable energy sources. At the end of the thesis, there are more detailed results of the calculations and the mechanical drawings of individual designs of the ventilation and heating system and also there are tables of the acquisition costs.
APA, Harvard, Vancouver, ISO, and other styles
15

Minařík, Petr. "Návrh větrání a vytápění v rekonstruovaném dvoupodlažním rodinném domě." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-241888.

Full text
Abstract:
The thesis deals with the calculation of the design heat load of a reconstructed family house and the design of both the space heating system and the balanced ventilation system for the house. The determination of the design heat load was performed according to ČSN EN 12831 technical standard. A low-temperature hydronic heating system was chosen for space heating of the house. The thesis describes the design of the system including calculations and the technical drawings. A heat source for the heating system was chosen with regard to the requirements of the investor. A mechanical ventilation system with heat recovery was proposed for house ventilation. The thesis contains the design of the ventilation system including calculations and the technical drawings.
APA, Harvard, Vancouver, ISO, and other styles
16

Kazda, Jan. "Návrh otopné soustavy a nuceného větrání pro dvougenerační vilu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-378281.

Full text
Abstract:
This Master's thesis deals with the evaluation of a current state of two-generation villa and its following proposal of the optimization. Evaluation includes calculation of heat loss of a current state. Optimization is based on the reduction of heat loss in the building, pressure balance of the system, change of heat source and installation of balanced ventilation. Chapter describing regulation of technology follows and in conclusion indicative price for the whole suggested technology is calculated.
APA, Harvard, Vancouver, ISO, and other styles
17

Truksa, Ondřej. "Návrh větrání a chlazení v multifunkční budově se zubními ordinacemi." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-378484.

Full text
Abstract:
The aim of the master’s thesis was to design ventilation and cooling systems in a three-storey mixed-use building, which contained three apartments and two dentists’ surgeries. Two independent ventilation systems were designed in the building, with respect to different purposes of the indoor spaces. The mechanical cooling system was proposed in some of the rooms to improve thermal comfort in summer. The thesis includes calculations of building heat gains, heat losses, air exchange rates and the dimensioning of the ventilation and cooling systems. The thesis also comprises design calculations and technical drawing.
APA, Harvard, Vancouver, ISO, and other styles
18

Halm, Petr. "Návrh vytápění a vzduchotechniky novostavby s nízkými energetickými náklady." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-241667.

Full text
Abstract:
The thesis is aimed on a proposal from heating sources, heating systems and ventilation of family house. Designing of a house is provided by Keeo4design. This proposal contains a complex of two houses. The first one is used for residential purposes, the other is made up of mostly parking garages. The work focuses on heat loss calculation objects. Subsequently, on a proposal from heating sources, heating systems, ventilation systems and their regulation.
APA, Harvard, Vancouver, ISO, and other styles
19

Černík, Václav. "Návrh vzduchotechniky a vytápění pro výrobní podnik." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230487.

Full text
Abstract:
This master’s thesis deals with heating and HVAC in production plant ELMET, spol. s r.o. The first part of the thesis concerns reconstruction of the central heating system, which is outdated and unreliable in the time of the writing of the thesis. The second part deals with cooling of mounting of electronics, where technological requirements are not met due to summer overheating. The third part of the thesis concerns ventilation of metalworking hall using waste heat from production machines.
APA, Harvard, Vancouver, ISO, and other styles
20

Hrbata, Jiří. "Návrh větracího systému rodinného domu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229445.

Full text
Abstract:
Diploma thesis deals with design of the ventilation system for low-energy house. Introduction of the thesis is focused on ventilation needs and also includes a summary of main principals of ventilation systems which are commonly used in family houses. One chapter is dedicated to utilization of ground heat exchangers and also includes a CFD simulation. The actual design of the ventilation system for low-energy house assess the suitability of using local/central ventilation units and also determines the best method of controlling the system.
APA, Harvard, Vancouver, ISO, and other styles
21

Potočník, Jan. "Návrh vytápění a vzduchotechniky pro dvoupatrový rodinný dům po rekonstrukci." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-254402.

Full text
Abstract:
The thesis is focused on the design of the reconstruction of a house built in the 70s of the last century. Part of this work is an introduction with the current state of the object and calculation of the appropriate heat losses. In the next step, renovations containing building insulation, replacement windows and doors, replacement of the heating system and the installation of air conditioning are made. Based on the design of the adjustments are again calculated heat losses and a comparation of energy savings is made. Another part of the proposal focuses in detail on heating system and its regulation. The final chapter deals with the design of the ventilation device using heat recovery. Attachments contain detailed calculations and necessary documentation.
APA, Harvard, Vancouver, ISO, and other styles
22

Vacenovský, Jan. "Návrh zařízení pro úpravu mikroklimatu v rekonstruovaném rodinném domě." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-378499.

Full text
Abstract:
This work is devoted to the design of a microclimate facility in a family house. The first part contains analysis of thermal losses before and after using thermal insulation. Based on this analysis, a heating system is proposed, including the necessary technical calculations for the operation of the system. As a heat source, a condensing boiler is selected. At the next point, the thesis focuses on the calculation of the heat gains in selected rooms in order to design a cooling device. A multisplit system is selected for cooling the rooms. In the next part the thesis deals with the design of forced ventilation of selected rooms. The ventilation system provides the necessary air exchange and covers heat losses through ventilation. At the end of the thesis is outlined the concept of regulation of individual systems and also the requirements for individual professions are described.
APA, Harvard, Vancouver, ISO, and other styles
23

Ležovič, Tomáš. "Experimentální analýza proudu vzduchu z ofukovače osobního vozu s využitím žárového anemometru a návrh hodnocení kvality ofukovače." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229643.

Full text
Abstract:
The master’s thesis deals with air flow in the interior of automobile Škoda Octavia. The attention is focused only at a side ventilating outlet. Author’s effort was to propose the appropriate criteria for evaluation and assessment of ventilating outlet quality and elaborate the methodology of measurement for these criteria. Then follows the application of the methodology and measurement of velocity field of air flow from the outlet by the method of hot wire anemometry. The thesis also contains comparison of the results with the results attained by the smoke visualization.
APA, Harvard, Vancouver, ISO, and other styles
24

Záboj, Jakub. "Návrh vytápění a ohřevu teplé vody v rodinném domě." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229674.

Full text
Abstract:
The thesis aims to propose a system for heating and hot water for a family house, according to drawings supplied by the building architect. At the request of the investor as the primary object will be considered a variant of underfloor heating. For comparing the heat loss, economic and possibly to State subsidies system selected will be processed by an alternative option to the ventilation air heating. Underfloor heating and hot air are among the low-temperature heating system, which can use low temperature heat sources, such as heat pumps. This assumption corresponds to investor requests, the source of heat in a family house with a heat pump and gas boiler. For hot water will be used as an alternative to a fireplace in the living room. To use the results of the thesis is to calculate the heat loss and heat, according to current standards include design and hot-water heating system including hot-drawing documentation. Finally, the economic evaluation of different alternatives in terms of investment and operating costs.
APA, Harvard, Vancouver, ISO, and other styles
25

Kuljovský, Martin. "Návrh větrné elektrárny." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231289.

Full text
Abstract:
This Master’s thesis concerns a theme of wind power in Czech Republic. It gives a brief overview of wind turbines available at the European market, in the observed performance of range 50 kW with subsequent economic analysis for the locality. At the same time, it mentioned a probability distribution and the mathematical models needed for processing and evaluation of meteorological data. Nevertheless, the main part of this work is focused on the aerodynamic design of the blade of wind power plant for given location and it’s both with and without considering the possible losses.
APA, Harvard, Vancouver, ISO, and other styles
26

Osička, Aleš. "Návrh matematického modelu větrné elektrárny." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2012. http://www.nusl.cz/ntk/nusl-219407.

Full text
Abstract:
The aim of this paper is to acquaint the readers with basic classification of wind turbine configuration by used electric generator, with speed and power control used in power plants and with mathematical model of wind and parts of power plant. Procedure of making model in applications Mathematica and MathModelica is described in the other part of this paper. There were made models of power plants with squirrel cage asynchronous generator, one with pitch control, the other with stall control. In the last part of the thesis comparison of model behavior of both models with the same input conditions was made.
APA, Harvard, Vancouver, ISO, and other styles
27

Chromec, Tomáš. "Aerodynamický návrh větrné turbíny pro zvolenou lokalitu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231651.

Full text
Abstract:
This master‘s thesis focuses on wind turbines. The first part describes the basic attributes of wind energy and wind turbines and is accompanied by a many images. The next section is a statistical processing of measured meteorological data from measuring stations of the Czech Hydrometeorological Institute. These data are then used for calculations of the blades of wind turbines. The calculations are carried by two different methods. The first method is called the blade element momentum theory, the second method is the theory of blade cascade. Using these methods are obtained by two different blades. The last section compares the two blades in terms of geometric and performance.
APA, Harvard, Vancouver, ISO, and other styles
28

Žabka, Marek. "Aerodynamický návrh větrné turbíny pro zvolenou lokalitu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-378728.

Full text
Abstract:
This Master’s thesis focuses on the wind turbines. It describes the basic attributes of the wind energy and the wind potential of Slovak Republic, as well as the environmental impact of this sector. Meteorological data for the selected location are processed according to the Weibull distribution and they are used for the aerodynamic design of the wind turbine blades. Aerodynamic design is processed by using two methods. The first is the blade cascade theory, which is used to design prismatic and twist blades. The second method is called the blade element momentum, which is used to design wind turbine but only twist blades are designed by using this theory. Calculated aerodynamic shapes are compared and the best economic solution for the selected location is chosen.
APA, Harvard, Vancouver, ISO, and other styles
29

Záviška, Radek. "Savoniova větrná turbína." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-231799.

Full text
Abstract:
The diploma thesis is focused on designer works of Savounius rotor for Raječko location. Finish of this design work is equipment, which will be used in this location as decentralized source of electrical energy. In thesis are written manufacturing processes as so as the process of design part including the calculation part, which is focused on characteristic quantity of Savonius rotor. Thesis is finished by econominal assessment of project.
APA, Harvard, Vancouver, ISO, and other styles
30

Váňa, Josef. "Návrh pasivního rodinného domu." Master's thesis, 2017. http://www.nusl.cz/ntk/nusl-431219.

Full text
Abstract:
Proposal of a family passive house is specified in this dissertation thesis. The house is wooden structured and it is situated in specific area. The thesis is divided into two parts. The first part of the thesis deals with general topic of wooden based houses - it is an introduction to wooden structured buildings. In the second part of the thesis there is a description of proposed object. The second part includes supplementary, technical and overall report. Basic architectonic and construction drawings are accompanied by detailed building drawings. Composition of peripheral walls complies with passive buildings requirements. This is proved by thermal-technical evaluation. Topic of heating and venting is described in the conclusion part of the thesis.
APA, Harvard, Vancouver, ISO, and other styles
31

Kubina, Matěj. "Návrh divadelní budovy v obci." Master's thesis, 2015. http://www.nusl.cz/ntk/nusl-190669.

Full text
Abstract:
This diploma work concentrates on the study of a theatre building for Poniklá village. The theoretical part attends especially to the theatre area, the submitter's profile, and to the directive references related to the theatre designing. The work solution itself consists in a design of a supporting structure and other applied structures in the facility, in the evaluation of their relation to the fire safety, acoustic parameters and thermic properties. The issue of individual halls (auditoriums), where visibility and acoustic is designed, is more specified. The design of the property heating and ventilation is a part of the work. Furthermore, the drawing documentation describing the property range needed for the study is attached to the diploma work.
APA, Harvard, Vancouver, ISO, and other styles
32

Kukuliš, Jaroslav. "Technický návrh a realizace zařízení pro regulovanou výměnu vzduchu." Master's thesis, 2010. http://www.nusl.cz/ntk/nusl-88407.

Full text
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography