Academic literature on the topic 'Natural fibre reinforced composites'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Natural fibre reinforced composites.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "Natural fibre reinforced composites":
Vedanarayanan, V., B. S. Praveen Kumar, M. S. Karuna, A. Jayanthi, K. V. Pradeep Kumar, A. Radha, G. Ramkumar, and David Christopher. "Experimental Investigation on Mechanical Behaviour of Kevlar and Ramie Fibre Reinforced Epoxy Composites." Journal of Nanomaterials 2022 (February 2, 2022): 1–10. http://dx.doi.org/10.1155/2022/8802222.
S.F.K. Sherwani, E.S. Zainudin, S.M. Sapuan, Z. Leman, and A. Khalina. "Recent Development of Natural Fibers Reinforced Polylactic Acid Composites." Journal of Research in Nanoscience and Nanotechnology 5, no. 1 (April 18, 2022): 103–8. http://dx.doi.org/10.37934/jrnn.5.1.103108.
Sharma, Ritika, Akshay Joshi, Dimple, and G. P. Singh. "TGA and Thermal Kinetics of Raw Calotropis Procera Fiber Reinforced PF Composites." Journal of Condensed Matter 1, no. 01 (June 1, 2023): 24–27. http://dx.doi.org/10.61343/jcm.v1i01.6.
Bhedasgaonkar, Rahul. "Manufacturing and Mechanical Properties Testing of Hybrid Natural Fibre Reinforced Polymer Composites." International Journal for Research in Applied Science and Engineering Technology 10, no. 6 (June 30, 2022): 2390–96. http://dx.doi.org/10.22214/ijraset.2022.43877.
Edafiadhe, E. D., and N. E. Nwanze. "A comparative study on the tensile properties and environmental suitability of glass fibre/raffia palm/plantain fibres hybridized epoxy bio-composites." Journal of Engineering Innovations and Applications 1, no. 2 (August 30, 2022): 32–39. http://dx.doi.org/10.31248/jeia2022.023.
Zaleha, M., M. Shahruddin, and I. Maizlinda Izwana. "A Review on the Mechanical and Physical Properties of Natural Fiber Composites." Applied Mechanics and Materials 229-231 (November 2012): 276–81. http://dx.doi.org/10.4028/www.scientific.net/amm.229-231.276.
Dong, Chensong. "Review of natural fibre-reinforced hybrid composites." Journal of Reinforced Plastics and Composites 37, no. 5 (December 3, 2017): 331–48. http://dx.doi.org/10.1177/0731684417745368.
Venkatarramaniah, Durgunti, Kanthi Madhu, Endabetla David, Kudikala Jayanth, Pallapu Kumar, and Chelpuri Chandu. "Investigation of Mechanical Properties of Natural Fiber Reinforced Hybrid Composite." International Journal for Research in Applied Science and Engineering Technology 12, no. 5 (May 31, 2024): 1527–34. http://dx.doi.org/10.22214/ijraset.2024.61906.
Jyani, Kanchan, G. P. Singh, Pritika Jay Banshiwal, and Ritika Sharma. "A Comprehensive Review of Natural Fibre Reinforced Polymer Composites." Journal of Condensed Matter 1, no. 02 (December 1, 2023): 21–26. http://dx.doi.org/10.61343/jcm.v1i02.11.
Kumar, Sanjeev, Lalta Prasad, Vinay Kumar Patel, Virendra Kumar, Anil Kumar, Anshul Yadav, and Jerzy Winczek. "Physical and Mechanical Properties of Natural Leaf Fiber-Reinforced Epoxy Polyester Composites." Polymers 13, no. 9 (April 22, 2021): 1369. http://dx.doi.org/10.3390/polym13091369.
Dissertations / Theses on the topic "Natural fibre reinforced composites":
Rao, Sanjeev. "Manufacture of cellular solids using natural fibre reinforced composites." Thesis, University of Auckland, 2009. http://hdl.handle.net/2292/5813.
Jabeen, Rowshni. "Laser transmission welding of natural fibre reinforced thermoplastic composites." Electronic Thesis or Diss., Ecole nationale supérieure Mines-Télécom Lille Douai, 2022. http://www.theses.fr/2022MTLD0011.
Laser transmission welding of thermoplastics requires the optimisation of interfacial adhesion at the weld joint. In this regard, the process modelling, and the development of numerical simulation tools are indispensable to optimize the mechanical strength of the weld joint. The task is more difficult in the case of highly heterogeneous and anisotropic composite materials. Moreover, the laser transmission is still difficult in the case of opaque or semi-transparent media such as natural fibre reinforced thermoplastic composites. The thermal and optical properties of composites depend on the properties and morphology of the constituents such as fibres and polymer, which can affect the transmission spectrum in the infrared range. The absorption and refraction of laser ray propagation in the composite materials lead to a reduction of the transmitted energy arriving at the weld interface, which directly influences the quality of the weld and its mechanical performance. In this dissertation, the effect of absorption and diffusion phenomena on the development of temperature field at the weld interface is analysed numerically and experimentally. Considering the fibre orientation, shape, length and volume fraction, numerical 3D geometries representing composite materials are generated to simulate the propagation of laser rays with “Ray tracing” algorithm. Numerical models to estimate the strength of weld are presented while considering the influence of welding parameters (such as laser power, feeding speed and focus position), material properties and molecular interdiffusion at the weld interface. The weld bonding strength is measured by mechanical tests and their results are compared with numerical modelling results
De, Klerk Marthinus David. "The durability of natural sisal fibre reinforced cement-based composites." Thesis, Stellenbosch : Stellenbosch University, 2015. http://hdl.handle.net/10019.1/96895.
ENGLISH ABSTRACT: The building industry is responsible for a substantial contribution to pollution. The production of building materials, as well as the operation and maintenance of structures leads to large amounts of carbon-dioxide (CO2) being release in the atmosphere. The use of renewable resources and construction materials is just one of the ways in which the carbon footprint of the building industry can be reduced. Sisal fibre is one such renewable material. Sisal fibre is a natural fibre from the Agave Sisalana plant. The possibility of incorporating sisal fibre in a cement-based matrix to replace conventional steel and synthetic fibres has been brought to the attention of researchers. Sisal fibre has a high tensile strength in excess of polypropylene fibre and comparable to PVA fibre. Sisal fibre consists mainly of cellulose, hemi-cellulose and lignin. The disadvantage of incorporating sisal fibre in a cement-based matrix is the degradation of the composite. Sisal fibres tend to degrade in an alkaline environment due to changes in the morphology of the fibre. The pore water in a cement base matrix is highly alkaline which leads to the degradation of the fibres and reduced strength of the composite over time. Sisal fibre reinforced cement-based composites (SFRCC) were investigated to evaluate the durability of the composites. Two chemical treatments, alkaline treatment and acetylation, were performed on the fibre at different concentrations to improve the resistance of the fibre to alkaline attack. Alkaline treatment was performed by using sodium hydroxide (NaOH), while acetylation was performed by using acetic acid or acetic anhydride. Single fibre pull-out (SFP) tests were performed to evaluate the influence of chemical treatment on fibre strength, to study the fibre-matrix interaction and to determine a critical fibre length. A matrix consisting of ordinary Portland cement (OPC), sand and water were used for the SFP tests. This matrix, as well as alternative matrices containing fly ash (FA) and condensed silica fume (CSF) as supplementary cementitious material, were reinforced with 1% sisal fibre (by volume) cut to a length of 20 mm. The OPC matrix was reinforced with untreated- and treated fibre while the alternative matrices were reinforced with untreated fibre. Alternative matrices containing varying fibre volumes and lengths were also produced. Three-point bending- (indirect), direct tensile- and compression tests were performed on specimens at an age of 28 days to determine the strength of the matrix. The remainder of the specimens were subjected to ageing by extended curing in water at 24˚C and 70˚C respectively and by alternate cycles of wetting and drying, after which it was tested at an age of 90 days from production to evaluate the durability of the fibre. An increase in fibre volume led to a decrease in compressive strength and peak tensile strength. The optimum fibre length at a volume of 1% was 20 mm for which the highest compression strength was recorded. The combination of alkali treatment and acetylation was the most effective treatment condition, followed by alkali treatment at low concentrations of sodium hydroxide. At higher concentrations of sodium hydroxide, a significant reduction in strength was recorded. The addition of supplementary cementitious materials also proved to be effective in mitigating degradation, especially in the cases where CSF was used. FA proved to be less effective in reducing the alkalinity of the matrix. However, the use of FA as fine filler resulted in higher strengths. Specimens manufactured by extrusion did not have superior mechanical properties to cast specimens. The conclusion was made that the use of sisal fibre in a cement-based matrix is effective in providing ductile failure. Chemical treatment and the addition of supplementary cementitious materials did improve the durability of the specimens, although degradation still took place.
AFRIKAANSE OPSOMMING: Die boubedryf is verantwoordelik vir 'n aansienlike bydrae tot besoedeling. Die produksie van boumateriale, sowel as die bedryf en instandhouding van strukture lei tot groot hoeveelhede koolstof dioksied (CO2) wat in die atmosfeer vrygestel word. Die gebruik van hernubare hulpbronne en boumateriale is maar net een van die maniere waarop die koolstof voetspoor van die boubedryf verminder kan word. Sisal vesels is 'n voorbeeld van 'n hernubare materiaal. Sisal vesel is 'n natuurlike vesel afkomstig vanaf die Agave Sisalana plant. Die moontlikheid om sisal vesels in 'n sement gebasseerde matriks te gebruik om konvensionele staal en sintetiese vesels te vervang, is tot die aandag van navorsers gebring. Sisal vesel het 'n hoër treksterkte as polipropileen vesels en die treksterkte vergelyk goed met die van PVA vesels. Sisal vesel bestaan hoofsaaklik uit sellulose, hemi-sellulose en lignien. Die nadeel verbonde aan die gebruik van sisal vesels in 'n sement gebasseerde matriks is die degradasie van die komposiet. Sisal vesels is geneig om af te breek in 'n alkaliese omgewing as gevolg van veranderinge wat in die morfologie van die vesel plaasvind. Die water in die porieë van 'n sement gebasseerde matriks is hoogs alkalies wat lei daartoe dat die vesel afgebreek word en die sterkte van die komposiet afneem oor tyd. Sisal vesel versterkte sement gebasseerde komposiete is ondersoek om die duursaamheid van die komposiete te evalueer. Twee chemiese behandelings, alkaliese behandeling en asetilering, is uitgevoer op die vesels teen verskillende konsentrasies om die weerstand van die vesels teen alkaliese aanslag te verbeter. Alkaliese behandeling was uitgevoer met natrium-hidroksied (NaOH) terwyl asetilering met asynsuur en asynsuurhidried uitgevoer is. Enkel vesel uittrek toetse is uitgevoer om die invloed van chemiese behandeling op veselsterkte te evalueer, om die vesel/matriks interaksie te bestudeer en om die kritiese vesellengte te bepaal. 'n Matriks wat uit gewone Portland sement (OPC), sand en water bestaan, is gebruik vir die enkel vesel uittrek toetse. Dieselfde matriks, sowel as alternatiewe matrikse wat vliegas (FA) en gekondenseerde silika dampe (CSF) as aanvullende sementagtige materiaal bevat, is versterk met 1% vesel (by volume) wat 20 mm lank gesny is. Die OPC matriks was versterk met onbehandelde- en behandelde vesels, terwyl die alternatiewe matrikse met onbehandelde vesels versterk is. Matrikse wat wisselende vesel volumes en lengtes bevat het is ook vervaardig. Drie-punt buigtoetse (indirek), direkte trek toetse en druktoetse is uitgevoer op proefstukke teen 'n ouderdom van 28 dae om die sterkte van die matriks te bepaal. Die oorblywende proefstukke is onderwerp aan veroudering deur verlengde nabehandeling in water teen 24˚C en 70˚C onderskeidelik en deur afwissilende siklusse van nat- en droogmaak waarna dit op 'n ouderdom van 90 dae vanaf vervaardiging getoets is om die duursaamheid van die matriks te evalueer. 'n Toename in vesel volume het tot 'n afname in druksterkte en piek treksterkte gelei. Die optimum vesel lengte teen 'n volume van 1% was 20 mm, waarvoor die hoogste druksterkte opgeteken is. Die kombinasie van alkaliese behandeling en asetilering was die mees effektiewe behandeling, gevolg deur alkaliese behandeling by lae konsentrasies natrium-hidroksied. Vir hoë konsentrasies natrium-hidroksied is 'n aansienlike afname in sterkte opgeteken. Die toevoeging van aanvullende sementagtige materiale was ook effektief om die degradadering van die vesels te verminder, veral in die gevalle waar CSF gebruik is. FA was minder effektief om die alkaliniteit van die matriks te verminder. Die gebruik van FA as fyn vuller het nietemin hoër sterkte tot gevolg gehad. Proefstukke wat deur ekstrusie vervaardig is, het nie beter meganiese eienskappe gehad as proefstukke wat gegiet is nie. Daar is tot die gevolgtrekking gekom dat sisal vesel in 'n sement gebasseerde matriks wel effektief is om 'n duktiele falingsmode te voorsien. Chemiese behandeling en die toevoeging van aanvullende sementagtige materiale het die duursaamheid van die proefstukke verbeter, alhoewel degradering steeds plaasgevind het.
Dhakal, Hom Nath. "The manufacture and properties of natural fibre/nanoclay reinforced unsaturated polyester composites." Thesis, University of Portsmouth, 2006. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.503594.
Morrissey, Helen Lorna. "The modelling of natural fibre-reinforced composites using a multi-scale methodology." Master's thesis, University of Cape Town, 2010. http://hdl.handle.net/11427/10981.
Includes bibliographical references (leaves 83-85).
A multi-scale methodology for small strain linear elasticity is presented in this thesis. The homogenisation process is discussed in general, with particular attention to the required boundary constraints on the micro-domain and the extraction of an effective elastic modulus. For the case of a non-linear problem the enforcement of the required boundary constraints becomes non-trivial and thus implementation via the penalty method and lagrange multipliers is investigated.
Hariwongsanupab, Nuttapong. "Development of green natural rubber composites : Effect of nitrile rubber, fiber surface treatment and carbon black on properties of pineapple leaf fiber reinforced natural rubber composites." Thesis, Mulhouse, 2017. http://www.theses.fr/2017MULH0399/document.
The effects of nitrile rubber (NBR), fiber surface treatment and carbon black on properties of pineapple leaf fiber-reinforced natural rubber composites (NR/PALF) were studied. The incorporation of NBR and surface treatment of fiber were used to improve the mechanical properties of composites at low deformation, whereas carbon black was used to improve these properties at high deformation. The fiber content was fixed at 10 phr. The composites were prepared using two-roll mill and were cured using compression moulding with keeping the fiber orientation. These composites were characterized using moving die rheometer (MDR), dynamic mechanical thermal analysis (DMTA) and tensile testing. The morphology after cryogenic fracture was observed using scanning electron microscopy (SEM). The effect of NBR from 0 to 20 phr of total rubber content was investigated. NBR is proposed to encase PALF leading to higher stress transfer between matrix and PALF. The method of mixing was also studied. For the fiber surface treatment, propylsilane, allylsilane and silane-69 were treated on the alkali-treated fiber. Treated fibers were characterized using Fourier-Transform infrared spectroscopy (FTIR), x-ray photoelectron spectroscopy (XPS) and SEM. Silane-69 treatment of fiber increased the modulus at low deformation more than the incorporation of NBR of NR/PALF composites due to the chemical crosslinking between rubber and fiber from silane-69 treatment rather than the physical interaction of NR, NBR and fiber. However, reinforcement by fiber reduced the deformation at break. Hence, carbon black was also incorporated into NR/NBR/PALF and NR/surface-treated PALF composites to improve the ultimate properties. By incorporation of carbon black 30 phr in both composites, the mechanical properties of composites were improved and can be controlled at both low and high deformations
Mak, Chun Fai Patric. "An investigation into the behaviour of fibre reinforced natural gas powered vechicle (NGV) pressure cylinders under impact loading." Thesis, University of Newcastle Upon Tyne, 1998. http://hdl.handle.net/10443/782.
Carpenter, James Edward Philip. "The preparation and properties of composites reinforced with natural fibres." Thesis, Bangor University, 2004. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.409572.
Pisupati, Anurag. "Manufacturing and characterization of flax fiber reinforced thermoset composites." Thesis, Ecole nationale supérieure Mines-Télécom Lille Douai, 2019. http://www.theses.fr/2019MTLD0014.
This dissertation presents insights into flax fiber based thermoset composites from two standpoints; manufacturing the composites by resin transfer molding and their mechanical characterization. In particular, two thermoset matrices have been investigated, i.e. conventional epoxy and bio-based benzoxazine. The influence of the intrinsic properties of flax fibers such as variability, fiber swelling and liquid absorption on the manufacturing of composite parts is investigated. By considering fiber swell and liquid absorption, a mathematical model for the capillary rise of liquid in flax fibers is proposed. As classical tow permeability models cannot be adopted for flax fibers due to their irregularities in cross-section and fiber diameter, this study resorts to numerical simulations to statistically estimate the permeability. The influence of injection pressure during resin transfer molding on void content in flax/epoxy plates is characterized and modeled to understand the differences in void formation from glass fiber composites. The effect of cure cycle on the mechanical properties of composites is investigated by tensile tests of unidirectional flax composites to emphasize the evolution of the mechanical locking at fiber/matrix interface caused by resin penetration into elementary fibers with increase in processing temperature. Finally, the long-term behavior of composites is examined for flax/epoxy composites and flax/benzoxazine composites, by hygrothermal aging test
Newby, William Robert. "Environmentally acceptable friction composites." Thesis, University of Exeter, 2014. http://hdl.handle.net/10871/15032.
Books on the topic "Natural fibre reinforced composites":
Salit, Mohd Sapuan, Mohammad Jawaid, Nukman Bin Yusoff, and M. Enamul Hoque, eds. Manufacturing of Natural Fibre Reinforced Polymer Composites. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-07944-8.
Le Moigne, Nicolas, Belkacem Otazaghine, Stéphane Corn, Hélène Angellier-Coussy, and Anne Bergeret. Surfaces and Interfaces in Natural Fibre Reinforced Composites. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-71410-3.
Thomas, Sabu, and Laly A. Pothan. Natural fibre reinforced polymer composites: From macro to nanoscale. Paris: Éd. des Archives Contemporaines, 2009.
Muthukumar, Chandrasekar, Senthilkumar Krishnasamy, Senthil Muthu Kumar Thiagamani, and Suchart Siengchin, eds. Aging Effects on Natural Fiber-Reinforced Polymer Composites. Singapore: Springer Singapore, 2022. http://dx.doi.org/10.1007/978-981-16-8360-2.
Krishnasamy, Senthilkumar, Mohit Hemath Kumar, Jyotishkumar Parameswaranpillai, Sanjay Mavinkere Rangappa, and Suchart Siengchin, eds. Interfacial Bonding Characteristics in Natural Fiber Reinforced Polymer Composites. Singapore: Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-99-8327-8.
Goh, Kheng Lim. Discontinuous-Fibre Reinforced Composites. London: Springer London, 2017. http://dx.doi.org/10.1007/978-1-4471-7305-2.
Bentur, Arnon. Fibre reinforced cementitious composites. London: Elsevier Applied Science, 1990.
Bentur, Arnon. Fibre reinforced cementitious composites. 2nd ed. London: Taylor & Francis, 2007.
Sultan, Mohamed Thariq Hameed Sultan, Murugan Rajesh, and Kandasamy Jayakrishna. Failure of Fibre-Reinforced Polymer Composites. Boca Raton: CRC Press, 2021. http://dx.doi.org/10.1201/9781003128861.
Haddad, Y. M., ed. Advanced Multilayered and Fibre-Reinforced Composites. Dordrecht: Springer Netherlands, 1998. http://dx.doi.org/10.1007/978-94-007-0868-6.
Book chapters on the topic "Natural fibre reinforced composites":
Kumar, Garje C. Mohan, and Sabuj Mallik. "Natural Fibre-Reinforced Polymer Composites." In Failure of Fibre-Reinforced Polymer Composites, 1–11. Boca Raton: CRC Press, 2021. http://dx.doi.org/10.1201/9781003128861-1.
Kumari, Neelam, Shivali Meena, Monika Chaparia, Sandip P. Choudhury, Ravi Kant Choubey, and Umesh Kumar Dwivedi. "Natural Fibre Reinforced Composites for Industrial Applications." In Polymer Composites, 301–27. Singapore: Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-2075-0_10.
Shwetharani, R., K. V. Yatish, M. S. Jyothi, C. Lavanya, Sabarish Radoor, and R. Geetha Balakrishna. "Natural Fibre-Reinforced Vinyl Ester Composites." In Vinyl Ester-Based Biocomposites, 141–59. Boca Raton: CRC Press, 2023. http://dx.doi.org/10.1201/9781003270997-9.
Zindani, Divya, Kaushik Kumar, and João Paulo Davim. "Fire Performance of Natural Fiber Reinforced Polymeric Composites." In Reinforced Polymer Composites, 209–24. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, 2019. http://dx.doi.org/10.1002/9783527820979.ch11.
Korniejenko, Kinga, Michał Łach, and Janusz Mikuła. "Mechanical Properties of Raffia Fibres Reinforced Geopolymer Composites." In Advances in Natural Fibre Composites, 135–44. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-64641-1_13.
Verma, Deepak. "Processing Techniques of Nanoclay Based Natural Fibre Reinforced Polymer Composites." In Nanoclay Reinforced Polymer Composites, 209–37. Singapore: Springer Singapore, 2016. http://dx.doi.org/10.1007/978-981-10-0950-1_9.
Russo, Pietro, Giorgio Simeoli, Valentina Lopresto, Antonio Langella, and Ilaria Papa. "Environmental Friendly Thermoplastic Composite Laminates Reinforced with Jute Fabric." In Advances in Natural Fibre Composites, 119–26. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-64641-1_11.
Siddique, Amna, Khubab Shaker, and Hanur Meku Yesuf. "Environmental Degradation of Natural Fibre–Reinforced Composites." In Emerging Sustainable and Renewable Composites, 33–52. Boca Raton: CRC Press, 2024. http://dx.doi.org/10.1201/9781003408215-2.
Santulli, Carlo. "Nanoclay Based Natural Fibre Reinforced Polymer Composites: Mechanical and Thermal Properties." In Nanoclay Reinforced Polymer Composites, 81–101. Singapore: Springer Singapore, 2016. http://dx.doi.org/10.1007/978-981-10-0950-1_4.
de M. de Lima, Tielidy A., Gabriel Goetten de Lima, and Michael J. D. Nugent. "Natural Fibre-Reinforced Polymer Composites: Manufacturing and Biomedical Applications." In Polymeric and Natural Composites, 25–63. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-70266-3_2.
Conference papers on the topic "Natural fibre reinforced composites":
Schwarzova, Ivana, Nadezda Stevulova, and Tomas Melichar. "Hemp Fibre Reinforced Composites." In Environmental Engineering. VGTU Technika, 2017. http://dx.doi.org/10.3846/enviro.2017.044.
Takagi, H., and Y. Hagiwara. "Fracture behaviour of natural fibre reinforced composites." In HPSM 2010. Southampton, UK: WIT Press, 2010. http://dx.doi.org/10.2495/hpsm100211.
de Araujo Alves Lima, Rosemere, DANIEL KIOSHI CAVALCANTI, Jorge Neto, and DOINA BANEA. "CHARACTERIZATION OF NATURAL FIBRE REINFORCED HYBRID COMPOSITES." In X Congresso Nacional de Engenharia Mecânica. ABCM, 2018. http://dx.doi.org/10.26678/abcm.conem2018.con18-0215.
Song, Young Seok, Jung Tae Lee, Jae Ryoun Youn, A. D’Amore, Domenico Acierno, and Luigi Grassia. "Natural Fiber Reinforced PLA Composites." In V INTERNATIONAL CONFERENCE ON TIMES OF POLYMERS (TOP) AND COMPOSITES. AIP, 2010. http://dx.doi.org/10.1063/1.3455601.
Yousif, B. F., K. J. Wong, and N. S. M. El-Tayeb. "An Investigation on Tensile, Compression and Flexural Properties of Natural Fibre Reinforced Polyester Composites." In ASME 2007 International Mechanical Engineering Congress and Exposition. ASMEDC, 2007. http://dx.doi.org/10.1115/imece2007-44012.
Ayrilmis, Nadir, and Alireza Ashori. "Automotive Interior Applications of Natural Fibre Reinforced Polymer Composites." In World Congress on Sustainable Technologies. Infonomics Society, 2021. http://dx.doi.org/10.20533/wcst.2021.0007.
Kooshki, Pantea, and Tsz-Ho Kwok. "Review of Natural Fiber Reinforced Elastomer Composites." In ASME 2018 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/detc2018-86042.
Seviaryna, Inna, Heloisa Gomes Bueno, Elena Maeva, and Jimi Tjong. "Characterization of natural fibre-reinforced composites with advanced ultrasonic techniques." In 2014 IEEE International Ultrasonics Symposium (IUS). IEEE, 2014. http://dx.doi.org/10.1109/ultsym.2014.0353.
Lorenzi, W., L. Di Landro, A. Casiraghi, M. R. Pagano, Alberto D’Amore, Domenico Acierno, and Luigi Grassia. "NATURAL FIBER OR GLASS REINFORCED POLYPROPYLENE COMPOSITES?" In IV INTERNATIONAL CONFERENCE TIMES OF POLYMERS (TOP) AND COMPOSITES. AIP, 2008. http://dx.doi.org/10.1063/1.2989033.
Mugarura, Isaac, and Mehmet Çevik. "Natural Fibers in Uganda Suitable for Sustainable Natural Fiber Reinforced Composites." In 7th International Students Science Congress. Izmir International guest Students Association, 2023. http://dx.doi.org/10.52460/issc.2023.040.
Reports on the topic "Natural fibre reinforced composites":
Poole, M., and M. Gower. Mechanical Characterisation of 3D Fibre-Reinforced Plastic (FRP) Composites. National Physical Laboratory, May 2022. http://dx.doi.org/10.47120/npl.mgpg151.
Trask, Richard S., Mark Hazzard, and Tom Llewellyn-Jones. Additive Layer Manufacturing of Biologically Inspired Short Fibre Reinforced Composites. Fort Belvoir, VA: Defense Technical Information Center, March 2014. http://dx.doi.org/10.21236/ada606966.
Beaver, P. W. A Review of Multiaxial Fatigue and Fracture of Fibre-Reinforced Composites. Fort Belvoir, VA: Defense Technical Information Center, January 1987. http://dx.doi.org/10.21236/ada191990.
Salmeron Perez, N., R. M. Shaw, and M. R. L. Gower. Mechanical testing of fibre-reinforced polymer matrix composites at cryogenic temperatures (-165ºC). National Physical Laboratory, November 2022. http://dx.doi.org/10.47120/npl.mat112.
Dissanayake, N. Assessment of Data Quality in Life Cycle Inventory (LCI) for Fibre-reinforced Polymer (FRP) composites. National Physical Laboratory, August 2022. http://dx.doi.org/10.47120/npl.mat106.
Pemberton, R. G., D. Edser, and MRL Gower. Optimisation of acid digestion conditions for volume fraction measurements of hard to digest fibre-reinforced polymer composites. National Physical Laboratory, September 2020. http://dx.doi.org/10.47120/npl.mn12.
Carus, Michael, Asta Eder, Lara Dammer, Hans Korte, Lena Scholz, Roland Essel, Elke Breitmayer, and Martha Barth. Wood-Plastic Composites (WPC) and Natural Fibre Composites (NFC): European and Global Markets 2012 and Future Trends in Automotive and Construction. Nova-Institut GmbH, June 2015. http://dx.doi.org/10.52548/thsz9515.
Salmeron Perez, N., R. M. Shaw, and M. R. L. Gower. Mechanical testing of fibre-reinforced polymer matrix composites at cryogenic temperatures. Requirements for mechanical test capability at -269°C (4 K). National Physical Laboratory, June 2022. http://dx.doi.org/10.47120/npl.mat102.
Spetsieris, N., and D. Edser. Framework for dynamic uncertainty budget evolution for mode I fracture toughness measurements of fibre-reinforced plastic (FRP) composites: a user’s guide to uncertainty budget calculation tool. National Physical Laboratory, June 2022. http://dx.doi.org/10.47120/npl.mat104.