Relevant bibliographies by topics / Nanostructural characterisation

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers

Academic literature on the topic 'Nanostructural characterisation'

Author: Grafiati
Published: 4 June 2021
Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Nanostructural characterisation.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Nanostructural characterisation"

1

Stefanis, A. De, A. A. G. Tomlinson, Th A. Steriotis, K. L. Stefanopoulos, and U. Keiderling. "Nanostructural characterisation of catalysts by SANS." Physica B: Condensed Matter 350, no. 1-3 (July 2004): E521—E524. http://dx.doi.org/10.1016/j.physb.2004.03.142.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Nagul, Edward A., Charles F. Croft, Robert W. Cattrall, and Spas D. Kolev. "Nanostructural characterisation of polymer inclusion membranes using X-ray scattering." Journal of Membrane Science 588 (October 2019): 117208. http://dx.doi.org/10.1016/j.memsci.2019.117208.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Tofail, S. A. M., I. Z. Rahman, M. A. Rahman, D. Sutton, and S. B. Newcomb. "Nanostructural characterisation of a thin film network of magnetic iron oxide." Journal of Magnetism and Magnetic Materials 242-245 (April 2002): 588–90. http://dx.doi.org/10.1016/s0304-8853(01)01112-x.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Subacius, Andrius, Bill Baloukas, Etienne Bousser, Steve J. Hinder, Mark A. Baker, Claus Rebholz, and Allan Matthews. "Nanostructural Characterisation and Optical Properties of Sputter-Deposited Thick Indium Tin Oxide (ITO) Coatings." Coatings 10, no. 11 (November 21, 2020): 1127. http://dx.doi.org/10.3390/coatings10111127.

Full text
Abstract:
Indium tin oxide (ITO) thin films, used in many optoelectronic applications, are typically grown to a thickness of a maximum of a few hundred nanometres. In this work, the composition, microstructure and optical/electrical properties of thick ITO coatings deposited by radio frequency magnetron sputtering from a ceramic ITO target in an Ar/O2 gas mixture (total O2 flow of 1%) on unheated glass substrates are reported for the first time. In contrast to the commonly observed (200) or (400) preferential orientations in ITO thin films, the approximately 3.3 μm thick coatings display a (622) preferential orientation. The ITO coatings exhibit a purely nanocrystalline structure and show good electrical and optical properties, such as an electrical resistivity of 1.3 × 10−1 Ω·cm, optical transmittance at 550 nm of ~60% and optical band gap of 2.9 eV. The initial results presented here are expected to provide useful information for future studies on the synthesis of high-quality thick ITO coatings.
APA, Harvard, Vancouver, ISO, and other styles
5

Gubbins, M. A., V. Casey, and S. B. Newcomb. "Nanostructural characterisation of SnO2 thin films prepared by reactive r.f. magnetron sputtering of tin." Thin Solid Films 405, no. 1-2 (February 2002): 270–75. http://dx.doi.org/10.1016/s0040-6090(01)01728-x.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Wei, Ye, Zirong Peng, Markus Kühbach, Andrew Breen, Marc Legros, Melvyn Larranaga, Frederic Mompiou, and Baptiste Gault. "3D nanostructural characterisation of grain boundaries in atom probe data utilising machine learning methods." PLOS ONE 14, no. 11 (November 18, 2019): e0225041. http://dx.doi.org/10.1371/journal.pone.0225041.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Rogante, M., Vladimír Havránek, Pavol Mikula, and Vasyl Ryukhtin. "Nanostructural Investigation of Case Hardened Steels for Speed Gears Applications by Small-Angle Neutron Scattering (SANS)." Solid State Phenomena 258 (December 2016): 403–7. http://dx.doi.org/10.4028/www.scientific.net/ssp.258.403.

Full text
Abstract:
17NiCrMo7, 19MnCr5 and 27MnCr5 low-alloy case-hardening steels samples have been investigated by SANS (Small-Angle Neutron Scattering), to achieve data on bulk nanoscale structure characterisation and complementary analytical and crystallographic information. The reported results are related in particular to the size distribution of nanosized pores which can help to comprehend the structural basis for the physico-chemical properties and thus to improve quality and durability of the considered materials. A complementary PIXE investigation has been also carried out, with the aim of a non-destructive assessment of the elemental composition of the considered samples.
APA, Harvard, Vancouver, ISO, and other styles
8

Barroso-Bogeat, Adrián, Iván Daza Raposo, Ginesa Blanco, and José María Pintado. "Tuning the Integration Rate of Ce(Ln)O2 Nanoclusters into Nanoparticulated ZrO2 Supports: When the Cation Size Matters." Materials 13, no. 12 (June 23, 2020): 2818. http://dx.doi.org/10.3390/ma13122818.

Full text
Abstract:
Three nanostructured catalysts with low total rare earth elements (REEs) content (i.e., 15 mol.%) were prepared by depositing CeO2 or Ln3+-doped CeO2 (Ln3+ = Y3+ or La3+; Ln/Ce = 0.15) on the surface of ZrO2 nanoparticles, as nanometre-thick, fluorite-type clusters. These samples were subjected to successive reduction treatments at increasing temperatures, from 500 to 900 °C. A characterisation study by XPS was performed to clarify the diffusion process of cerium into the bulk of ZrO2 crystallites upon reduction to yield CexZr1−xO2−δ surface phases, and the influence of the incorporation of non-reducible trivalent REE cations, with sizes smaller (Y3+) and larger (La3+) than Ce4+ and Ce3+. For all nanocatalysts, a reduction treatment at a minimum temperature of 900 °C was required to accomplish a significant cerium diffusion. Notwithstanding, the size of the dopant noticeably affected the extent of this diffusion process. As compared to the undoped ZrO2-CeO2 sample, Y3+ incorporation slightly hindered the cerium diffusion, while the opposite effect was found for the La3+-doped nanocatalyst. Furthermore, such differences in cerium diffusion led to changes in the surface and nanostructural features of the oxides, which were tentatively correlated with the redox response of the thermally aged samples.
APA, Harvard, Vancouver, ISO, and other styles
9

Mohammadi, M. R., M. Ghorbani, and D. J. Fray. "Preparation and characterisation of nanostructural TiO2–Er2O3binary oxides with high surface area derived from particulate sol–gel route." Materials Science and Technology 22, no. 8 (August 2006): 965–74. http://dx.doi.org/10.1179/174328406x102372.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Mohammadi, M. R., M. Ghorbani, M. C. Cordero-Cabrera, and D. J. Fray. "Preparation and characterisation of nanostructural TiO2–Ga2O3 binary oxides with high surface area derived form particulate sol–gel route." Journal of Materials Science 42, no. 13 (February 23, 2007): 4976–86. http://dx.doi.org/10.1007/s10853-006-0380-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Nanostructural characterisation"

1

Buha, Joka School of Materials Science &amp engineering UNSW. "Interrupted ageing of Al-Mg-Si-Cu alloys." Awarded by:University of New South Wales. School of Materials Science and engineering, 2005. http://handle.unsw.edu.au/1959.4/20794.

Full text
Abstract:
This thesis systematically investigates the effects of a recently developed modified ageing procedure of aluminium alloys, termed the T6I6 temper, on the microstructural development and mechanical properties of the Al ??? Mg ??? Si - Cu alloy 6061. For the T6I6 temper, a conventional single stage T6 temper is interrupted by an ageing period at a reduced temperature (65??C) to facilitate secondary precipitation, before resuming the final ageing at the temperature of the initial T6 treatment. The T6I6 temper was found to cause simultaneous increases in tensile properties, hardness, and toughness as compared with 6061 T6. Al ??? Mg ??? Si ??? Cu alloys are medium strength alloys widely used in the automotive industry and their further improvement is underpinned by stringent demands for weight reduction placed on the transportation industry in recent years. The potential for further improvement of the mechanical properties was found in the control of secondary precipitation that may take place even in some fully aged alloys when exposed to reduced temperatures. The overall improvement in the mechanical properties of 6061 T6I6 was attributed to the formation of finer and more densely dispersed precipitates in the final microstructure. The refinement of precipitates was facilitated by control of the precipitation processes and gradual evolution of the microstructure throughout each stage of the T6I6 treatment. The results indicated that the concentration and the chemical environment of the vacancies controlled the precipitation processes in this alloy. Findings also show that the proportion of the different precipitate phases present in the final microstructure, as well as the amount of the solute in these precipitates, can be controlled and modified utilizing secondary precipitation. A number of analytical techniques were used in this study. The evolution of the microstructure was studied using Transmission Electron Microscopy (TEM), High Resolution TEM (HRTEM) and Three Dimensional Atom Probe (3DAP). Vacancy-solute interactions were studied using Positron Annihilation Lifetime Spectroscopy (PALS) and 3DAP. The distribution of the solute was studied using 3DAP and Nuclear Magnetic Resonance (NMR). Differential Scanning Calorimetry (DSC) was used to identify precipitation reactions and to determine the stability of vacancy-associated aggregates.
APA, Harvard, Vancouver, ISO, and other styles
2

Krishnan, Jagadamma Lethy. "Characterisation of nanostructured light emitters." Thesis, University of Strathclyde, 2012. http://oleg.lib.strath.ac.uk:80/R/?func=dbin-jump-full&object_id=17192.

Full text
Abstract:
Group III-nitride semiconductors are the dominant inorganic solid state light emitting materials, spanning the UV to infra-red spectral range. InGaN/GaN based LEDs and lasers are commercially available and intense research is being pursued to improve their efficiency. One practical approach is the development of functionalised and/or improved materials patterned on a nanometre length scale. This thesis presents the optical, morphological and compositional characterisation of III-nitride based nanostructured light emitters. The III-nitride nanostructures studied are GaN coalesced above arrays of either nanopyramids or nanocolumns, semipolar and nonpolar InGaN QWs on the facets of GaN nanopyramids, and thin epilayers of AlInN and AlInGaN. Spatially resolved optical characterisation of nano-ELOG GaN layers revealed a shift in the exciton-related band edge emission across the coalesced layer. This is related to Si doping and to strain effects. Study of the semipolar {1011} InGaN QWs grown on the facets of GaN nanopyramids identified a blue shift in QW emission energy as the sampled region is moved up the pyramid facets. This shift is found to follow the release of the tensile strain towards the top of nanopyramid. Luminescence properties of nearly lattice matched AlInN epilayers investigated using CL, PL and PLE spectroscopic techniques revealed that the emission and bandgap energy of the AlInN layers are at higher energy than that of GaN. Results obtained from polarisation resolved PL measurements of AlInN epilayers point to two possible implications: the observed higher energy AlInN emission is either related to defects or this emission is due to carrier recombination occurring in InN clusters similar to those of InGaN epilayers. Optical properties of thin AlInGaN epilayers investigated using PL and PLE spectroscopy revealed a redshift in bandgap energy with increase in InN fraction. The observed spatial intensity fluctuations are discussed in terms of the InN compositional fluctuations and inhomogeneous strain effects.
APA, Harvard, Vancouver, ISO, and other styles
3

Smith, Nathan. "Characterisation of zinc oxide nanostructures." Thesis, Swansea University, 2015. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.678399.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Collins, Christopher J. A. "Electrical characterisation of organic nanostructures." Thesis, Bangor University, 2009. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.519555.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Borowiak-Palen, Ewa. "Synthesis and characterisation of molecular nanostructures." Doctoral thesis, Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2004. http://nbn-resolving.de/urn:nbn:de:swb:14-1092389977453-71487.

Full text
Abstract:
In this thesis, bulk and local scale spectroscopic and microscopic tools have been applied to investigate the purified raw material of SWCNT and synthesized MWBNNT, BN-nanocapsules, B-doped SWCNT and SiC nanostructures. Using bulk scale sensitive techniques, including optical absorption spectroscopy, Raman spectroscopy, high-resolution electron energy-loss spectroscopy, the average response of the whole sample is obtained. On the other hand, on a local scale transmission and scanning electron microscopy as well as TEM-electron energy-loss spectroscopy provide information on single tubes or other nanostructures. First, diverse chemical and oxidation methods for the purification of as-produced SWCNT were presented. Purified samples were investigated using TEM and OAS. The analysis of the optical absorption spectra in the UV-Vis energy range revealed that some of the chemical treatments are harmful to nanotubes. In contrast to the chemical treatments an oxygen burning procedure was used on the raw material in high vacuum and a temperature range 450?650oC. The purification processes of SWCNT by HNO3 and oxygen burning procedures resulted in SWCNT comprised of selected diameters and a reduced diameter distribution. Both HNO3 and oxygen burning treatments can be used to selectively remove SWCNT with smaller diameters from the samples. In addition, an adapted substitution reaction was used for the synthesis of multiwall boron nitride nanotubes. It was shown that the IR-response of MWBNNT can be used as a fingerprint to analyse MWBNNT. As in h-BN for the analysis one has to be aware of the sample texture and the LO-TO splitting of the IR-active modes. TEM images and B1s and N 1s excitation edges of the grown material reveal the presence of multiwall BN nanotubes with an inner diameter of 3.1 nm and with a larger interplanar distance than in h-BN. The electronic properties of the multiwall BN nanotubes as derived from the q-dependent dielectric function e(w,q) are dominated by the band structure of the hexagonal-like BN sheets, as revealed by the large degree of momentum dispersion observed for the p and s+p plasmons, in agreement with that previously reported for different graphitic allotropic forms. Moreover, a fast and highly efficient synthesis route to produce BN nanocapsules with a narrow size distribution was developed. This was achieved by an adapted substitution process using SWCNT as templates followed by a rapid cooling treatment. The IR responses reveal the strong dipole active fingerprint lines of h-BN with distinct differences, which are due to texturing effects and which highlight the BN nanocapsules potential application as a reference source when deriving the sp2 to sp3 ratio in BN species due to their random orientation Furthermore, the idea of substitution was used for the systematic studies of B-doped SWCNT. The experiments carried out have resulted in 1, 5, 10, and 15 % boron incorporated into the single wall carbon nanotubes. Core level excitation spectroscopy of the B1s and C1s edges revealed that the boron atoms substitute carbon atoms in the tube lattice keeping an sp2-like bond with their nearest C neighbour atoms. Our results show that a simple rigid band model as has been applied previously to intercalated SWCNT is not sufficient to explain the changes in the electronic properties of highly doped B-SWCNT and a new type of a highly defective BC3 SWNT with new electronic properties is obtained. Finally, different silicon carbide nanostructures were produced. The spectroscopic and microscopic data led to a good understanding of the formation process. NH3 acts as a source of hydrogen that plays a key role in the formation of the structures through its ability to decompose SiC at high temperature such that along with the stacking faults that arise from the many polytypes of SiC the produced SiC nanorods become porous then hollow and eventually are completely decomposed.
APA, Harvard, Vancouver, ISO, and other styles
6

Oliver, Rachel. "Growth and characterisation of nitride nanostructures." Thesis, University of Oxford, 2003. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.400219.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Chivall, J. M. "Growth and characterisation of uranium nanostructures." Thesis, University College London (University of London), 2012. http://discovery.ucl.ac.uk/1348539/.

Full text
Abstract:
Uranium is the only element in the periodic table to exhibit a charge-density wave and superconductivity at ambient pressure. The competition between these effects in technologically important high-temperature superconducting systems has come under increasing scrutiny, and uranium offers a model system in which to study the CDW. However, the element is difficult to grow in single-crystals in the bulk. We describe the growth by magnetron sputtering and characterisation of single-crystal epitaxial thin- films of alpha-uranium in the (110) orientation on the Nb(110)/A-plane sapphire buffer layer/substrate system. We use X-ray scattering methods to determine the influence of the thickness of the component layers of the samples on the microstructure, and find that there is a non-trivial dependence of the microstructural state of the uranium layers on both the thickness of the uranium layers themselves and the thickness of the niobium buffer layers upon which they are grown. In particular, the widths of the uranium peaks decrease when the uranium layer thickness is increased, but increase when the buffer layer thickness is increased. An extensive review of the methods for characterisation of thin- film microstructures using X-ray diffraction is given, and several widely used models and interpretations are critically discussed, in particular those given in the many instances in which two-component line shapes are seen in transverse scans from thin- films. We also use X-ray diffraction from high-intensity synchrotron sources to characterise the charge-density wave state in these samples, and discuss the effect of uranium-layer thickness on its characteristics as a function of temperature. Important differences between the CDW seen in bulk uranium and in thin- films are seen and discussed in terms of the microstructure of the films. In particular, no incommensurate{commensurate transition is seen in the films, and a large intensity asymmetry is seen between the 2+2+1± and 2+2-1± CDW satellites. Furthermore, the correlation-length of the CDW is limited in the plane of the film, and dependent on the thickness of the uranium layers.
APA, Harvard, Vancouver, ISO, and other styles
8

Ho, G. W. "Synthesis, characterisation and properties of nanostructured materials." Thesis, University of Cambridge, 2006. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.604107.

Full text
Abstract:
Synthesis of controlled quality and quantity of nanostructured materials form the basis of future nanotechnology building blocks. The understanding of fundamental properties, creation of complex hierarchical nanostructured materials and development of nanotechnologies are research areas which follow closely after the synthesis of nanomaterials. First and foremost, the key growth parameters of vapour-phase synthesis were identified so as to control the growth of nanomaterials with desired physical dimensions and chemical compositions. The synthesized nanomaterials were characterised using various chemical and structural analysis techniques in a complementary fashion. In addition, various self-assembly growth techniques were used to engineer the growth of complex nanostructures. The use of lithography; photolithography and ion beam lithography to generate micro to nano dimension catalyst patterns proved to be a valuable guide for selective growth of nanowires, whilst the use of zinc oxide polyhedron crystals and grain-boundary textured Cu templates have successfully produced a variety of interesting hierarchical nanostructures. Essentially, the templates act as a structure directing medium to intercede the growth in a confined manner. Success in the growth of one-dimensional single-crystal nanowires is the focus of interest since they offer the potential to answer fundamental questions about the effect of dimensionality on physical properties and are expected to play a central role in applications ranging from molecular electronics to scanning microscopy probes. Finally, with the availability of nanostructures in desirable crystal structures and chemical compositions, studies on their physical properties and phenomena were performed. Interesting properties such as the wettability and electrical properties were investigated. In particular, silicon carbide nanowire flowers show remarkable surface hydrophobicity and elasticity attributed to the unconventional multi-directional assembly of nanowires. The zinc oxide nanowires, on the other hand, exhibit superior electrical conductivity due to their clean surfaces and perfect crystallinity nature.
APA, Harvard, Vancouver, ISO, and other styles
9

Houchin, Rachael May. "Spectroscopic and microscopic characterisation of carbon nanostructures." Thesis, Durham University, 2011. http://etheses.dur.ac.uk/3414/.

Full text
Abstract:
Currently, carbon nanotubes (CNTs) are produced using a variety of techniques which yield CNT materials with wide ranging levels of chemical purity and structural perfection. Consequently, characterising CNT materials accurately is of utmost importance if potential applications of CNTs are to be realised on a large scale. In this work four commercially available CNT samples are characterised using a number of techniques, namely: scanning electron microscopy (SEM); high resolution transmission microscopy (HRTEM); energy dispersive x-ray analysis (EDX); Auger electron spectroscopy (AES); low-loss electron energy loss spectroscopy (low-loss EELS); ultra-violet photoemission spectroscopy (UPS); x-ray photoemission spectroscopy (XPS) and Raman spectroscopy. The information provided by these techniques is assessed in their ability to characterise different CNT materials. The definition of CNT ‘quality’ is also discussed and the ability of these techniques to determine such a property is considered. A significant part of ascertaining the ‘quality’ of a CNT sample lies in understanding the nature and number of defects in the walls of these materials. In this work, defects are introduced into the lattice of different CNT species using 1.5 keV Ar+ ions and the effects are monitored using XPS. In particular, the resultant reactivity of irradiated CNTs to ambient atmospheric oxygen is investigated, which is found to be markedly enhanced for CNTs with one wall when compared to those with multiple walls. It is also demonstrated that the type of incident ion and irradiation dose can be used to selectively control the level and nature of the surface composition of oxygen functionalised SWCNTs. Many applications of fullerenes require detailed understanding of how these molecules interact with surfaces and the perturbations this induces. In this work the interaction of C60 with highly ordered pyrolytic graphite (HOPG) and Ni(110) is studied using scanning tunnelling microscopy (STM), low energy electron diffraction (LEED), XPS and UPS. Investigation focuses on a novel two-dimensional solid-vapour phase in the C60-HOPG system and the C60-induced reconstruction of the Ni(110) surface.
APA, Harvard, Vancouver, ISO, and other styles
10

White, Richard. "Synthesis and characterisation of three-dimensional nanostructures." Thesis, University of Cambridge, 2008. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.612473.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Nanostructural characterisation"

1

Berridge, Timothy Edward. The synthesis and characterisation of hybrid nanostructures containing both organic and inorganic regions. Birmingham: University of Birmingham, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Carbon And Oxide Nanostructures Synthesis Characterisation And Applications. Springer, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Yahya, Noorhana. Carbon and Oxide Nanostructures: Synthesis, Characterisation and Applications. Springer, 2013.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

(Editor), M. Alexe, and A. Gruverman (Editor), eds. Nanoscale Characterisation of Ferroelectric Materials: Scanning Probe Microscopy Approach (NanoScience and Technology). Springer, 2004.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Nanoparticles in Anti-Microbial Materials: Use and Characterisation. Royal Society of Chemistry, The, 2012.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

(Editor), Witold Lojkowski, John R. Blizzard (Editor), Urszula Narkiewicz (Editor), and Janusz D. Fidelus (Editor), eds. Doped Nanopowders: Synthesis, Characterisation, Applications: Proceedings of Symposium C European Materials Research Society Fall Meeting, Warsaw University of Technolog (Solid State Phenomena). Trans Tech Pubn, 2007.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Nanostructural characterisation"

1

Krolow, M. Z., C. A. Hartwig, G. C. Link, C. W. Raubach, J. S. F. Pereira, R. S. Picoloto, M. R. F. Gonçalves, N. L. V. Carreño, and M. F. Mesko. "Synthesis and Characterisation of Carbon Nanocomposites." In Carbon Nanostructures, 33–47. Berlin, Heidelberg: Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-31960-0_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Freeland, Brian, Inam Ul Ahad, Greg Foley, and Dermot Brabazon. "Advanced Characterisation Techniques for Nanostructures." In Micro and Nanomanufacturing Volume II, 55–93. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-67132-1_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Köhler, R., W. Neumann, M. Schmidbauer, M. Hanke, D. Grigoriev, P. Schäfer, H. Kirmse, I. Häusler, and R. Schneider. "Structural Characterisation of Quantum Dots by X-Ray Diffraction and TEM." In Semiconductor Nanostructures, 97–121. Berlin, Heidelberg: Springer Berlin Heidelberg, 2008. http://dx.doi.org/10.1007/978-3-540-77899-8_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Schuster, Christian Stefano. "Fabrication and Characterisation of Diffractive Nanostructures." In Diffractive Optics for Thin-Film Silicon Solar Cells, 53–64. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-44278-5_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Kassavetis, Spyridon, Christoforos Gravalidis, and Stergios Logothetidis. "Thin Film Deposition and Nanoscale Characterisation Techniques." In Nanostructured Materials and Their Applications, 105–29. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-22227-6_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Marshall, J. M. "Electronic Properties and Characterisation of Disordered Semiconductors." In Functional Properties of Nanostructured Materials, 29–44. Dordrecht: Springer Netherlands, 2006. http://dx.doi.org/10.1007/1-4020-4594-8_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Aizikovich, S. M., J. P. Celis, L. I. Krenev, and N. A. Serova. "Non-Destructive Mechanical Characterisation of Mechanical Properties of Non-Homogeneous Nanostructured Coatings." In Nanostructured Films and Coatings, 315–22. Dordrecht: Springer Netherlands, 2000. http://dx.doi.org/10.1007/978-94-011-4052-2_27.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Kleps, Irina, Anca Angelescu, and Mihaela Miu. "Preparation and Characterisation of Metallic Thin Films for Electroluminescent Devices Based on Porous Silicon." In Nanostructured Films and Coatings, 337–45. Dordrecht: Springer Netherlands, 2000. http://dx.doi.org/10.1007/978-94-011-4052-2_29.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Tinker-Mill, Claire Louisa. "Theoretical Concepts of Scanning Probe Microscopy and Dynamic Light Scattering and Their Relation to the Study of Peptide Nanostructures." In Nanoscale Imaging and Characterisation of Amyloid-β, 7–30. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-39534-0_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Deák, András, Erzsébet Hild, Attila L. Kovács, and Zoltán Hórvölgyi. "Characterisation of Solid Supported Nanostructured Thin Films by Scanning Angle Reflectometry and UV-Vis Spectrometry." In Materials Science Forum, 329–36. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-426-x.329.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Nanostructural characterisation"

1

Han, Z. W., L. F. Xie, Y. C. Han, O. Q. Ni, J. Y. Chen, and Y. C. Xie. "Nanostructured ceria synthesized by detonation method and its ultraviolet absorption performance." In MATERIALS CHARACTERISATION 2013. Southampton, UK: WIT Press, 2013. http://dx.doi.org/10.2495/mc130031.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Bououdina, M. "Carbon Nanostructures: Synthesis and Characterisations." In NANOTECHNOLOGY AND ITS APPLICATIONS: First Sharjah International Conference on Nanotechnology and Its Applications. AIP, 2007. http://dx.doi.org/10.1063/1.2776690.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Parkinson, Patrick, Hannah J. Joyce, X. Xu, Qiang Gao, H. Hoe Tan, C. Jagadish, Laura M. Herz, and Michael B. Johnston. "Characterisation of nanostructures via terahertz spectroscopy." In Devices (COMMAD). IEEE, 2010. http://dx.doi.org/10.1109/commad.2010.5699756.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Jablonski, Grzegorz, Pawel Janus, Piotr Pietrzak, Tomasz Torzewicz, Artur Sobczak, Marcin Janicki, Andrzej Napieralski, Andrzej Sierakowski, Anna Brzezinska, and Piotr Prokaryn. "Manufacturing and characterisation of MEMS test nanostructures." In 2017 23rd International Workshop on Thermal Investigations of ICs and Systems (THERMINIC). IEEE, 2017. http://dx.doi.org/10.1109/therminic.2017.8233794.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Sheridan, A. K., A. W. Clark, A. Glidle, J. M. Cooper, and D. R. S. Cumming. "Optical Characterisation of Nanostructured Metallic Split-Ring Arrays." In 2007 European Conference on Lasers and Electro-Optics and the International Quantum Electronics Conference. IEEE, 2007. http://dx.doi.org/10.1109/cleoe-iqec.2007.4386185.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Fu, Xiao, Jinjin Cong, The Duong, Heping Shen, Klaus J. Weber, Kylie R. Catchpole, and Thomas P. White. "Time- and Excitation-dependent Photoluminescence Characterisation of CH3NH3PbI3 Perovskite films." In Optical Nanostructures and Advanced Materials for Photovoltaics. Washington, D.C.: OSA, 2015. http://dx.doi.org/10.1364/pv.2015.pth3b.4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Baba, Razvan, Osamu Kojima, Kristof J. P. Jacobs, Brett A. Harrison, Ben J. Stevens, Toshikazu Mukai, and Richard A. Hogg. "Characterisation of thin-layer resonant tunnelling diodes grown by MOVPE." In Quantum Dots and Nanostructures: Growth, Characterization, and Modeling XVI, edited by Diana L. Huffaker and Holger Eisele. SPIE, 2019. http://dx.doi.org/10.1117/12.2510119.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Bergin, Shane D. "Characterisation of Single-walled Carbon Nanotube Bundle Dissociation in Amide Solvents." In ELECTRONIC PROPERTIES OF NOVEL NANOSTRUCTURES: XIX International Winterschool/Euroconference on Electronic Properties of Novel Materials. AIP, 2005. http://dx.doi.org/10.1063/1.2103861.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

MCGILP, J. F. "OPTICAL SECOND HARMONIC GENERATION AND THE CHARACTERISATION OF LOW DIMENSIONAL NANOSTRUCTURES ON PLANAR SILICON." In Proceedings of the 24th Course of the International School of Solid State Physics. WORLD SCIENTIFIC, 2004. http://dx.doi.org/10.1142/9789812702982_0006.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Patra, Sabyasachi, Debasis Sen, Chhavi Agarwal, Ashok K. Pandey, S. Mazumder, and A. Goswami. "Synthesis, characterisation and counterion dependent mesoscopic modifications of ionomer nanocomposites having different dimensional silver nanostructures." In SOLID STATE PHYSICS: PROCEEDINGS OF THE 57TH DAE SOLID STATE PHYSICS SYMPOSIUM 2012. AIP, 2013. http://dx.doi.org/10.1063/1.4790995.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Nanostructural characterisation' for particular source types:
Journal articles Dissertations / Theses
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography