Relevant bibliographies by topics / Nanoscale corrosion

Academic literature on the topic 'Nanoscale corrosion'

Author: Grafiati
Published: 14 March 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Contents

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Nanoscale corrosion.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Nanoscale corrosion"

1

Zhu, Ping, Qiang Zhang, Yixiao Xia, Kai Sun, Xiu Lin, Huasong Gou, Serge Shil’ko, and Gaohui Wu. "Effect of Nanoscale W Coating on Corrosion Behavior of Diamond/Aluminum Composites." Nanomaterials 13, no. 2 (January 11, 2023): 307. http://dx.doi.org/10.3390/nano13020307.

Full text
Abstract:
The stability of diamond/aluminum composite is of significant importance for its extensive application. In this paper, the interface of diamond/aluminum composite was modified by adding nanoscale W coating on diamond surface. We evaluated the corrosion rate of nanoscale W-coated and uncoated diamond/aluminum composite by a full immersion test and polarization curve test and clarified the corrosion products and corrosion mechanism of the composite. The introduction of W nanoscale coating effectively reduces the corrosion rate of the diamond/aluminum composite. After corrosion, the bending strength and thermal conductivity of the nanoscale W-coated diamond/aluminum composite are considerably higher than those of the uncoated diamond/aluminum composite. The corrosion loss of the material is mainly related to the hydrolysis of the interface product Al4C3, accompanied by the corrosion of the matrix aluminum. Our work provides guidance for improving the life of electronic devices in corrosive environments.
APA, Harvard, Vancouver, ISO, and other styles
2

Ma, Haoran, and Roland Bennewitz. "Relationship between corrosion and nanoscale friction on a metallic glass." Beilstein Journal of Nanotechnology 13 (February 18, 2022): 236–44. http://dx.doi.org/10.3762/bjnano.13.18.

Full text
Abstract:
Metallic glasses are promising materials for microdevices, although corrosion and friction limit their effectiveness and durability. We investigated nanoscale friction on a metallic glass in corrosive solutions after different periods of immersion time using atomic force microscopy to elucidate the influence of corrosion on nanoscale friction. The evolution of friction upon repeated scanning cycles on the corroded surfaces reveals a bilayer surface oxide film, of which the outer layer is removed by the scanning tip. The measurement of friction and adhesion allows one to compare the physicochemical processes of surface dissolution at the interface of the two layers. The findings contribute to the understanding of mechanical contacts with metallic glasses under corrosive conditions by exploring the interrelation of microscopic corrosion mechanisms and nanoscale friction.
APA, Harvard, Vancouver, ISO, and other styles
3

Kvryan, Armen, Corey Efaw, Kari Higginbotham, Olivia Maryon, Paul Davis, Elton Graugnard, Hitesh Trivedi, and Michael Hurley. "Corrosion Initiation and Propagation on Carburized Martensitic Stainless Steel Surfaces Studied via Advanced Scanning Probe Microscopy." Materials 12, no. 6 (March 21, 2019): 940. http://dx.doi.org/10.3390/ma12060940.

Full text
Abstract:
Historically, high carbon steels have been used in mechanical applications because their high surface hardness contributes to excellent wear performance. However, in aggressive environments, current bearing steels exhibit insufficient corrosion resistance. Martensitic stainless steels are attractive for bearing applications due to their high corrosion resistance and ability to be surface hardened via carburizing heat treatments. Here three different carburizing heat treatments were applied to UNS S42670: a high-temperature temper (HTT), a low-temperature temper (LTT), and carbo-nitriding (CN). Magnetic force microscopy showed differences in magnetic domains between the matrix and carbides, while scanning Kelvin probe force microscopy (SKPFM) revealed a 90–200 mV Volta potential difference between the two phases. Corrosion progression was monitored on the nanoscale via SKPFM and in situ atomic force microscopy (AFM), revealing different corrosion modes among heat treatments that predicted bulk corrosion behavior in electrochemical testing. HTT outperforms LTT and CN in wear testing and thus is recommended for non-corrosive aerospace applications, whereas CN is recommended for corrosion-prone applications as it exhibits exceptional corrosion resistance. The results reported here support the use of scanning probe microscopy for predicting bulk corrosion behavior by measuring nanoscale surface differences in properties between carbides and the surrounding matrix.
APA, Harvard, Vancouver, ISO, and other styles
4

Liu, Yaru, Qinglin Pan, Xiangdong Wang, Ye Ji, Qicheng Liu, Zhiqi Huang, Zhuowei Peng, and andWeiyi Wang. "Computational and Experimental Insights into the Role of Acidic Molecules on the Corrosion Behavior on 7A46 Aluminum Alloy." Journal of Nanoscience and Nanotechnology 21, no. 4 (April 1, 2021): 2221–33. http://dx.doi.org/10.1166/jnn.2021.19087.

Full text
Abstract:
The corrosion mechanisms for different corrosive media on the aged 7A46 aluminum alloy were systematically investigated at nanoscale level. The combination of empirical intergranular and exfoliation corrosion behavior was employed, and coupled with first-principles calculations. Results revealed that the dispersed distribution of matrix precipitates (MPs) leads to the enhancement of the corrosion resistance pre-ageing (PA) followed by double-ageing (PA-DA) alloy. The deepest corrosion depth of PA-DA alloy was in hydrochloric acid, and the calculation result demonstrates that the passivation effect in combination with the accumulation of corrosion products in nitric acid protect the PA-DA alloy from further corrosion.
APA, Harvard, Vancouver, ISO, and other styles
5

Hoque, Md Ashraful, Chun-Wei Yao, Mukunda Khanal, and Ian Lian. "Tribocorrosion Behavior of Micro/Nanoscale Surface Coatings." Sensors 22, no. 24 (December 17, 2022): 9974. http://dx.doi.org/10.3390/s22249974.

Full text
Abstract:
Wear and corrosion are common issues of material degradation and failure in industrial appliances. Wear is a damaging process that can impact surface contacts and, more specifically, can cause the loss and distortion of material from a surface because of the contacting object’s mechanical action via motion. More wear occurs during the process of corrosion, in which oxide particles or debris are released from the contacting material. These types of wear debris and accumulated oxide particles released during corrosion cause a combination of wear-corrosion processes. Bringing together the fields of tribology and corrosion research, tribocorrosion is a field of study which deals with mechanical and electrochemical interactions between bodies in motion. More specifically, it is the study of mechanisms caused by the combined effects of mechanical stress and chemical/electrochemical interactions with the environment. Tribocorrosion testing methods provide new opportunities for studying the electrochemical nature of corrosion combined with mechanical loading to establish a synergistic relationship between corrosion and wear. To improve tribological, mechanical, and anti-corrosion performances, several surface modification techniques are being applied to develop functional coatings with micro/nano features. This review of the literature explores recent and enlightening research into the tribocorrosive properties of micro/nano coatings. It also looks at recent discussions of the most common experimental methods and some newer, promising experimental methods in tribocorrosion to elucidate their applications in the field of micro/nano coatings.
APA, Harvard, Vancouver, ISO, and other styles
6

Guo, Tianqi, Jean-Claude Scimeca, Sašo Ivanovski, Elise Verron, and Karan Gulati. "Enhanced Corrosion Resistance and Local Therapy from Nano-Engineered Titanium Dental Implants." Pharmaceutics 15, no. 2 (January 17, 2023): 315. http://dx.doi.org/10.3390/pharmaceutics15020315.

Full text
Abstract:
Titanium is the ideal material for fabricating dental implants with favorable biocompatibility and biomechanics. However, the chemical corrosions arising from interaction with the surrounding tissues and fluids in oral cavity can challenge the integrity of Ti implants and leach Ti ions/nanoparticles, thereby causing cytotoxicity. Various nanoscale surface modifications have been performed to augment the chemical and electrochemical stability of Ti-based dental implants, and this review discusses and details these advances. For instance, depositing nanowires/nanoparticles via alkali-heat treatment and plasma spraying results in the fabrication of a nanostructured layer to reduce chemical corrosion. Further, refining the grain size to nanoscale could enhance Ti implants’ mechanical and chemical stability by alleviating the internal strain and establishing a uniform TiO2 layer. More recently, electrochemical anodization (EA) has emerged as a promising method to fabricate controlled TiO2 nanostructures on Ti dental implants. These anodized implants enhance Ti implants’ corrosion resistance and bioactivity. A particular focus of this review is to highlight critical advances in anodized Ti implants with nanotubes/nanopores for local drug delivery of potent therapeutics to augment osseo- and soft-tissue integration. This review aims to improve the understanding of novel nano-engineered Ti dental implant modifications, focusing on anodized nanostructures to fabricate the next generation of therapeutic and corrosion-resistant dental implants. The review explores the latest developments, clinical translation challenges, and future directions to assist in developing the next generation of dental implants that will survive long-term in the complex corrosive oral microenvironment.
APA, Harvard, Vancouver, ISO, and other styles
7

Farag, Ahmed A. "Applications of nanomaterials in corrosion protection coatings and inhibitors." Corrosion Reviews 38, no. 1 (February 25, 2020): 67–86. http://dx.doi.org/10.1515/corrrev-2019-0011.

Full text
Abstract:
AbstractVarious methodologies are practically used to control corrosion. Coatings are the most widely used to protect metals against corrosion. However, due to the weak resistance of polymer coating against the penetration of corrosive solution to the metal/coating interface, the long-term corrosion resistance of the polymer coating is reduced gradually. Recently, nanoparticles have been added to coatings to improve their chemical, mechanical and optical properties. Nanocoatings either have constituents in the nanoscale or are made out of layers that are under 100 nm. Nanocoatings are used effectively to lessen the impact of a corrosive environment due to its various preferences, such as surface hardness, adhesive quality, long haul and, additionally, high-temperature corrosion opposition, and to improve its tribological properties, and so forth. Moreover, nanocoatings can be utilized in more slender and smoother thickness, which permits adaptability in equipment design and lower upkeep and working expenses. This review covers applications related to the management of metal corrosion, including the use of nanomaterials to produce high-performance corrosion inhibitors and corrosion-resistant coatings.
APA, Harvard, Vancouver, ISO, and other styles
8

Scully, John R. "Corrosion chemistry closing comments: opportunities in corrosion science facilitated by operando experimental characterization combined with multi-scale computational modelling." Faraday Discussions 180 (2015): 577–93. http://dx.doi.org/10.1039/c5fd00075k.

Full text
Abstract:
Recent advances in characterization tools, computational capabilities, and theories have created opportunities for advancement in understanding of solid–fluid interfaces at the nanoscale in corroding metallic systems. The Faraday Discussion on Corrosion Chemistry in 2015 highlighted some of the current needs, gaps and opportunities in corrosion science. Themes were organized into several hierarchical categories that provide an organizational framework for corrosion. Opportunities to develop fundamental physical and chemical data which will enable further progress in thermodynamic and kinetic modelling of corrosion were discussed. These will enable new and better understanding of unit processes that govern corrosion at the nanoscale. Additional topics discussed included scales, films and oxides, fluid–surface and molecular–surface interactions, selected topics in corrosion science and engineering as well as corrosion control. Corrosion science and engineering topics included complex alloy dissolution, local corrosion, and modelling of specific corrosion processes that are made up of collections of temporally and spatially varying unit processes such as oxidation, ion transport, and competitive adsorption. Corrosion control and mitigation topics covered some new insights on coatings and inhibitors. Further advances inoperandoorin situexperimental characterization strategies at the nanoscale combined with computational modelling will enhance progress in the field, especially if coupling across length and time scales can be achieved incorporating the various phenomena encountered in corrosion. Readers are encouraged to not only to use thisad hocorganizational scheme to guide their immersion into the current opportunities in corrosion chemistry, but also to find value in the information presented in their own ways.
APA, Harvard, Vancouver, ISO, and other styles
9

Wang, Xingjun, Weipeng Sun, Wenge Li, Chenglin Zuo, Yong Jiang, and Shuangxi Wang. "Development of Waterborne Heavy-Duty Anticorrosive Coatings with Modified Nanoscale Titania." Coatings 12, no. 11 (October 31, 2022): 1651. http://dx.doi.org/10.3390/coatings12111651.

Full text
Abstract:
The steel structures of coastal engineering in the moist tropics and subtropics are always under a C5/CX level corrosion environment with high temperature, high humidity, and high salt fog. Anticorrosive waterborne coatings with high weatherability and reliability are urgently to be developed. In this work, one kind of waterborne heavy-duty anticorrosive coatings, with the advantages of excellent corrosion resistance, self-repairing ability, self-cleaning ability, and high film compactness, was successfully achieved through modifying the side chains on the surface morphologies of the spherical nanoscale titania. The micromorphology and structure of the coating were characterized by a scanning electron microscope (SEM), transmission electron microscope (TEM), and atomic force microscope (AFM). The anticorrosion characteristics and forming mechanism of the modified nanoscale titania coating were analyzed. The salt spray tests showed that the neutral salt spray resistance time of the modified nanoscale titania coating was 1440 h. Its durability reached the H level and met the design requirements for 15 years of anticorrosion lifetime. The modified nanoscale titania coatings had been large-scale commercially applied at some typical steel structures under an extreme harsh corrosion environment in one coastal thermal power plant. The results showed that no rusting, peeling, or crack phenomena were observed after 3 years of service under different harsh coastal corrosion conditions.
APA, Harvard, Vancouver, ISO, and other styles
10

Geng, Mingrui, Guangyu He, Zhiping Sun, Jiao Chen, Zhufang Yang, and Yuqin Li. "Corrosion Damage Mechanism of TiN/ZrN Nanoscale Multilayer Anti-Erosion Coating." Coatings 8, no. 11 (November 13, 2018): 400. http://dx.doi.org/10.3390/coatings8110400.

Full text
Abstract:
TiN/ZrN multilayers can effectively improve the erosion resistance of metals, particularly titanium alloys employed in aero engines. To explore the corrosion damage mechanism of TiN/ZrN nanoscale multilayers (nanolaminate), a novel [TiN/ZrN]100 nanolaminate coating was deposited on Ti-6Al-4V alloys by multi-arc ion plating method. Salt spray corrosion tests and hot corrosion experiment were carried out to evaluate the corrosion resistance of the coating. The corrosion and damage mechanisms were explored with the help of detailed microstructure, phase composition and element distribution characterizations. The salt spray corrosion tests showed that the [TiN/ZrN]100 nanolaminate coating possessed good corrosion resistance, which protected substrate against the corrosion. The low temperature hot corrosion tests showed that the oxidation occurred on the surface of the coating, which improved the oxidation resistance of the sample. However, the oxidized droplets squeezed the coating, and destroyed the oxidized layers. As a result, the coating was peeled off from the substrate. The research highlights the corrosion resistance of the novel TiN/ZrN nanolaminate coating and offers a support for their application in engine compressor blade.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Nanoscale corrosion"

1

Scott, William Walter Jr. "Micro/Nanoscale Differential Wear and Corrosion of Multiphase Materials." The Ohio State University, 2001. http://rave.ohiolink.edu/etdc/view?acc_num=osu994420446.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Scott, William Walter. "Micro/nanoscale differential wear and corrosion of multiphase materials /." Connect to this title online, 2001. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=osu994420446.

Full text
Abstract:
Thesis (Ph. D.)--Ohio State University, 2001.
Advisor: Bharat Bhushan, Dept. of Mechanical Engineering. Includes bibliographical references (leaves 145-152). Available online vai OhioLINK's ETD center.
APA, Harvard, Vancouver, ISO, and other styles
3

Annand, Kirsty June. "The nanoscale mechanisms of Zircaloy-4 corrosion in simulated nuclear reactor conditions." Thesis, University of Glasgow, 2018. http://theses.gla.ac.uk/8781/.

Full text
Abstract:
Worldwide, zirconium alloys have long been utilised for fuel cladding elements and other structural components within several commercial designs of nuclear reactor owing to their high creep resistance, superior corrosion resistance in highly aggressive environments, and low cross section for neutron absorption. The purpose of this cladding material is to separate the uranium dioxide (UO2) fuel and the coolant water in order to prevent the escape of fission products, whilst also maintaining heat transfer to the coolant. Consequently, water corrosion of the fuel containments has become a key factor in the limitation of the lifetime of fuel rods within nuclear reactors, and maintaining containment integrity under corrosion is critical to ensuring safe operation and preventing accidental release of radionuclides into the cooling water. Therefore, developing an understanding of the mechanisms which govern the corrosion of zirconium-based alloys is vital, and is the motivation behind this study. The analysis of the corrosion of an unirradiated zirconium based alloy - Zircaloy-4 - is performed in a three-fold manner in this thesis. Firstly, an investigation of the metal:oxide interface is carried out, the results of which are set out in Chapter 4 of this thesis. Providing a clear understanding of the nanoscale structure and chemistry of this interface, alongside a thorough investigation of the morphology of any suboxide phases generated during the process of corrosion is fundamental to understanding the overall corrosion of this alloy. Secondly, systematic analysis of the corrosion and incorporation of SPPs into the oxide layer is performed in Chapter 5 of this thesis, in order to help inform the role of SPPs on the corrosion process for both autoclave, and more importantly, on irradiated oxides. In addition, spatially resolved chemical mapping, and correlation to the crystallographic structure provides an understanding not previously shown in the literature on the complex corrosion that takes place. Finally, Chapter 6 presents findings from studying oxygen content through the oxide scale, performed in order to quantitatively elucidate the details of the oxygen content from the outer porous oxide, through the stoichiometric ZrO2, and into any metastable suboxide layers present. This analysis highlights the significance of understanding such microstructural behaviour, in order to interpret the overall macro structural corrosion behaviour of zirconium alloys.
APA, Harvard, Vancouver, ISO, and other styles
4

Yang, Feipeng. "Nanoscale Characterization of Electrolyte Diffusion, Interface Morphology Disruption and Surface Dynamics of Polymer Melt Films Adsorbed on Graphene." University of Akron / OhioLINK, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=akron1542133274117037.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

ELSAYED, AHMED MAHMOUD. "Low-pressure plasma treatments for cleaning metallic heritage artefacts." Doctoral thesis, Politecnico di Torino, 2019. http://hdl.handle.net/11583/2740997.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Huang, Chun-Lung, and 黃俊龍. "Corrosion and oxidation behavior of Cu nanowires with high-density nanoscale twin boundaries." Thesis, 2017. http://ndltd.ncl.edu.tw/handle/wq8qdv.

Full text
Abstract:
博士
國立清華大學
材料科學工程學系
106
Copper (Cu) is an important conductive material used in microelectronic integrated-circuit devices due to its high electrical conductivity and low cost. However, Cu also suffers some intrinsic drawbacks such as oxidation and fast atomic diffusion, which would degrade device performance and even cause reliability problems. Cu metallization with highly dense nanoscale twin boundaries (nanotwinned Cu) have received wide attention because it possesses some excellent properties such as high tensile strength, good electromigration resistance and excellent thermal stability. However, few studies have addressed the chemical property of twin-modified Cu surface, especially for the nanotwinned Cu nanowires (nt-CuNWs). In this study, we investigate the chemical reactivity and structure stability of nt-CuNWs under moistured air ambient, water and acidic solution. The microstructural evolution and oxide formation behavior of nt-CuNWs were ex-situ monitored by transmission electron microscopy. By comparing the nt-CuNWs and nanocrystalline CuNWs (nc-CuNWs), it is found that the former exhibits a zig-zag faceted structure with very low atomic step density, while the latter have an atomically rough surface with high atomic step density. The nt-CuNWs appear to have reduced chemical reactivity and enhanced resistance to chemical corrosion. On the other hand, the nc-CuNWs were gradually oxidized by forming cuprous oxide (Cu2O) under water or moisture environment, which decomposed and transformed into Cu nanoparticles when exposed to visible light. According to the photoelectrochemical reaction of Cu/Cu2O system, we found that the nt-CuNWs demonstrate high chemical stability against the photolytic reaction. A kinetic mechanism based on the low chemical reactivity of twin-modified Cu surface and effective Cu/Cu2O interfacial vacancy sinking is proposed to explain why the nt-CuNWs are resistant against Kirkendall void formation.
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Nanoscale corrosion"

1

Corrosion Protection at the Nanoscale. Elsevier, 2020. http://dx.doi.org/10.1016/c2018-0-05391-8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Corrosion Protection at the Nanoscale. Elsevier, 2020.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Li, Yongxin, Susai Rajendran, Tuán Anh Nguyen, Saeid Kakooei, and Mahdi Yeganeh. Corrosion Protection at the Nanoscale. Elsevier, 2020.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Polychroniadis, Efstathios K., Ahmet Yavuz Oral, and Mehmet Ozer. International Multidisciplinary Microscopy Congress: Proceedings of InterM, Antalya, Turkey, October 10–13, 2013. Springer, 2016.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Polychroniadis, Efstathios K., Ahmet Yavuz Oral, and Mehmet Ozer. International Multidisciplinary Microscopy Congress: Proceedings of InterM, Antalya, Turkey, October 10-13 2013. Springer London, Limited, 2014.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

International Multidisciplinary Microscopy Congress: Proceedings of InterM, Antalya, Turkey, October 10-13 2013. Springer International Publishing AG, 2014.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Nanoscale corrosion"

1

Maurice, Vincent, and Philippe Marcus. "Corrosion at the Nanoscale." In Electrochemistry at the Nanoscale, 377–406. New York, NY: Springer New York, 2009. http://dx.doi.org/10.1007/978-0-387-73582-5_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Dillmann, Philippe. "Nanoscale Aspects of Corrosion on Cultural Heritage Metals." In Nanoscience and Cultural Heritage, 233–52. Paris: Atlantis Press, 2016. http://dx.doi.org/10.2991/978-94-6239-198-7_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Persaud, S. Y. "Studying Stress Corrosion Cracking Mechanisms Using Novel Nanoscale Characterization." In Proceedings of the 61st Conference of Metallurgists, COM 2022, 237–43. Cham: Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-17425-4_33.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Yeganeh, Mahdi, Tuan Anh Nguyen, Susai Rajendran, Saeid Kakooei, and Yongxin Li. "Corrosion protection at the nanoscale." In Corrosion Protection at the Nanoscale, 3–7. Elsevier, 2020. http://dx.doi.org/10.1016/b978-0-12-819359-4.00001-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Gavrilović-Wohlmuther, Aleksandra, Andreas Laskos, and Erich Kny. "Corrosion inhibitor–loaded smart nanocontainers." In Corrosion Protection at the Nanoscale, 203–23. Elsevier, 2020. http://dx.doi.org/10.1016/b978-0-12-819359-4.00012-x.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Nguyen, Tuan Anh, Susai Rajendran, Saeid Kakooei, Mahdi Yeganeh, and Yongxin Li. "Nanomaterials for cathodic protection of metals." In Corrosion Protection at the Nanoscale, 9–18. Elsevier, 2020. http://dx.doi.org/10.1016/b978-0-12-819359-4.00002-7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Vignesh, R. Vaira, R. Padmanaban, M. Govindaraju, and G. Suganya Priyadharshini. "Corrosion protection of magnesium alloys in simulated body fluids using nanophase Al2O3." In Corrosion Protection at the Nanoscale, 21–45. Elsevier, 2020. http://dx.doi.org/10.1016/b978-0-12-819359-4.00003-9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Ratna Kumar, P. S. Samuel, S. Jyothi, and S. John Alexis. "Corrosion behavior of aluminum alloy reinforced with MWCNTs." In Corrosion Protection at the Nanoscale, 47–61. Elsevier, 2020. http://dx.doi.org/10.1016/b978-0-12-819359-4.00004-0.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Hussain, M. Irfan, Somia Nawaz, Muhammad Munir Sajid, Ahmed Nawaz, Ayesha Irum, Yasir Javed, Changchun Ge, and Ghulam Yasin. "Corrosion resistance of nanostructured metals and alloys." In Corrosion Protection at the Nanoscale, 63–87. Elsevier, 2020. http://dx.doi.org/10.1016/b978-0-12-819359-4.00005-2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Raja, Pandian Bothi, Mohammad Ali Assad, and Mohammad Ismail. "Inhibitor-encapsulated smart nanocontainers for the controlled release of corrosion inhibitors." In Corrosion Protection at the Nanoscale, 91–105. Elsevier, 2020. http://dx.doi.org/10.1016/b978-0-12-819359-4.00006-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Nanoscale corrosion"

1

Aqueeb, Ahsan, Venkataramana Gadhamshetty, and Sayan Roy. "An Electromagnetically Transparent and Microbial Corrosion Resistant Nanoscale Protective Coating." In 2021 IEEE Research and Applications of Photonics in Defense Conference (RAPID). IEEE, 2021. http://dx.doi.org/10.1109/rapid51799.2021.9521385.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Cai, Qianqian, Jinkai Xu, Zhongxu Lian, Zhanjiang Yu, Huadong Yu, and Jian Li. "Superhydrophobic magnesium alloy surface with corrosion resistance." In 2021 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO). IEEE, 2021. http://dx.doi.org/10.1109/3m-nano49087.2021.9599746.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Casaletto, Maria Pia, Antonella Privitera, and Viviana Figa. "Nanoscale Investigations of the Corrosion of Metallic Artworks by X-Ray Photoemission Spectroscopy." In 2018 IEEE 4th International Forum on Research and Technology for Society and Industry (RTSI). IEEE, 2018. http://dx.doi.org/10.1109/rtsi.2018.8548415.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Davies, J. L., J. Williams, J. R. Searle, J. V. Langkruis, E. Zoestbergen, and V. John. "Alteration of the Optical Properties of PVD Coatings by Corrosion Induced Nanoscale Roughness." In Society of Vacuum Coaters Annual Technical Conference. Society of Vacuum Coaters, 2013. http://dx.doi.org/10.14332/svc13.proc.1104.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Yang, Chengjuan, Xue Yang, Zhen Yang, and Dawei Zhang. "Corrosion Resistant of Superhydrophobic Aluminum Surfaces Fabricated by Nanosecond Lasers." In 2022 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO). IEEE, 2022. http://dx.doi.org/10.1109/3m-nano56083.2022.9941642.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Li, Jian, Yiquan Li, Jinkai Xu, Zhanjiang Yu, Huadong Yu, and Qianqian Cai. "Superhydrophobic aluminum alloy surface with self-cleaning and anti-corrosion properties." In 2021 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO). IEEE, 2021. http://dx.doi.org/10.1109/3m-nano49087.2021.9599737.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Wang, Jiaqi, Jinkai Xu, Zhongxu Lian, and Huadong Yu. "Study on Corrosion Behavior of Titanium Alloy by Waterjet-assisted Laser Ablation." In 2022 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO). IEEE, 2022. http://dx.doi.org/10.1109/3m-nano56083.2022.9941353.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Flannery, Matthew, Angie Fan, and Tapan G. Desai. "Nanoscale coatings for erosion and corrosion protection of copper microchannel coolers for high powered laser diodes." In SPIE LASE, edited by Mark S. Zediker. SPIE, 2014. http://dx.doi.org/10.1117/12.2037770.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Van Velson, Nathan, and Matt Flannery. "Performance life testing of a nanoscale coating for erosion and corrosion protection in copper microchannel coolers." In 2016 15th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm). IEEE, 2016. http://dx.doi.org/10.1109/itherm.2016.7517612.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Ren, Zhencheng, Xiaoning Hou, Yalin Dong, and Chang Ye. "Effect of Nanocrystallization-Assisted Nitriding on the Corrosion Behavior of AISI 4140 Steel." In ASME 2016 11th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/msec2016-8705.

Full text
Abstract:
In this study, an innovative process called nanocrystallization-assisted nitriding was used to process 4140 steels. First, a nanocrystalline surface layer was induced in 4140 steel by ultrasonic nanocrystal surface modification (UNSM). The abundant nanoscale grain boundaries provide micro-channels for efficient nitrogen diffusion during nitriding at relatively low temperature (450 °C) and short duration (4 hours). The samples were characterized by X-ray diffraction, scanning electron microscopy and energy dispersive spectroscopy. The hardness and corrosion resistance were examined and compared for samples after different processing conditions. It has been demonstrated that the sample processed by nanocrystallization-assisted nitriding has much higher hardness and corrosion resistance compared with the samples processed by nitriding only.
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Nanoscale corrosion"

1

SUGAMA, T. NANOSCALE BOEHMITE FILLER FOR CORROSION AND WEAR RESISTANT POLYPHENYLENESULFIDE COATINGS. Office of Scientific and Technical Information (OSTI), June 2003. http://dx.doi.org/10.2172/812306.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Nanoscale corrosion' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography