Academic literature on the topic 'Nanopatterned substrates'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Nanopatterned substrates.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Nanopatterned substrates"

1

Socol, Marcela, Nicoleta Preda, Oana Rasoga, Andreea Costas, Anca Stanculescu, Carmen Breazu, Florin Gherendi, and Gabriel Socol. "Pulsed Laser Deposition of Indium Tin Oxide Thin Films on Nanopatterned Glass Substrates." Coatings 9, no. 1 (December 29, 2018): 19. http://dx.doi.org/10.3390/coatings9010019.

Full text
Abstract:
Indium tin oxide (ITO) thin films were grown on nanopatterned glass substrates by the pulsed laser deposition (PLD) technique. The deposition was carried out at 1.2 J/cm2 laser fluence, low oxygen pressure (1.5 Pa) and on unheated substrate. Arrays of periodic pillars with widths of ~350 nm, heights of ~250 nm, and separation pitches of ~1100 nm were fabricated on glass substrates using UV nanoimprint lithography (UV-NIL), a simple, cost-effective, and high throughput technique used to fabricate nanopatterns on large areas. In order to emphasize the influence of the periodic patterns on the properties of the nanostructured ITO films, this transparent conductive oxide (TCO) was also grown on flat glass substrates. Therefore, the structural, compositional, morphological, optical, and electrical properties of both non-patterned and patterned ITO films were investigated in a comparative manner. The energy dispersive X-ray analysis (EDX) confirms that the ITO films preserve the In2O3:SnO2 weight ratio from the solid ITO target. The SEM and atomic force microscopy (AFM) images prove that the deposited ITO films retain the pattern of the glass substrates. The optical investigations reveal that patterned ITO films present a good optical transmittance. The electrical measurements show that both the non-patterned and patterned ITO films are characterized by a low electrical resistivity (<2.8 × 10−4). However, an improvement in the Hall mobility was achieved in the case of the nanopatterned ITO films, evidencing the potential applications of such nanopatterned TCO films obtained by PLD in photovoltaic and light emitting devices.
APA, Harvard, Vancouver, ISO, and other styles
2

Liu, Dan, Che Azurahanim Che Abdullah, Richard P. Sear, and Joseph L. Keddie. "Cell adhesion on nanopatterned fibronectin substrates." Soft Matter 6, no. 21 (2010): 5408. http://dx.doi.org/10.1039/c0sm00201a.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Selhuber, Christine, Jacques Blümmel, Fabian Czerwinski, and Joachim P. Spatz. "Tuning Surface Energies with Nanopatterned Substrates." Nano Letters 6, no. 2 (February 2006): 267–70. http://dx.doi.org/10.1021/nl052256e.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Saito, Yukio, Maxime Ignacio, and Olivier Pierre-Louis. "Solid-state wetting on nanopatterned substrates." Comptes Rendus Physique 14, no. 7 (August 2013): 619–28. http://dx.doi.org/10.1016/j.crhy.2013.06.010.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Gellini, Cristina, Maurizio Muniz-Miranda, Massimo Innocenti, Francesco Carlà, Francesca Loglio, Maria Luisa Foresti, and Pier Remigio Salvi. "Nanopatterned Ag substrates for SERS spectroscopy." Physical Chemistry Chemical Physics 10, no. 31 (2008): 4555. http://dx.doi.org/10.1039/b807663d.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Vaisman, Michelle, Nikhil Jain, Qiang Li, Kei May Lau, Emily Makoutz, Theresa Saenz, Willian E. McMahon, Adele C. Tamboli, and Emily L. Warren. "GaAs Solar Cells on Nanopatterned Si Substrates." IEEE Journal of Photovoltaics 8, no. 6 (November 2018): 1635–40. http://dx.doi.org/10.1109/jphotov.2018.2871423.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Mandlik, P., S. P. Lacour, J. W. Li, S. Y. Chou, and S. Wagner. "Fully elastic interconnects on nanopatterned elastomeric substrates." IEEE Electron Device Letters 27, no. 8 (August 2006): 650–52. http://dx.doi.org/10.1109/led.2006.879029.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Stafiniak, Andrzej, Joanna Prażmowska, Wojciech Macherzyński, and Regina Paszkiewicz. "Nanostructuring of Si substrates by a metal-assisted chemical etching and dewetting process." RSC Advances 8, no. 54 (2018): 31224–30. http://dx.doi.org/10.1039/c8ra03711f.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Rodríguez-Pereira, Cristina, Anna Lagunas, Ignasi Casanellas, Yolanda Vida, Ezequiel Pérez-Inestrosa, José A. Andrades, José Becerra, Josep Samitier, Francisco J. Blanco, and Joana Magalhães. "RGD-Dendrimer-Poly(L-lactic) Acid Nanopatterned Substrates for the Early Chondrogenesis of Human Mesenchymal Stromal Cells Derived from Osteoarthritic and Healthy Donors." Materials 13, no. 10 (May 13, 2020): 2247. http://dx.doi.org/10.3390/ma13102247.

Full text
Abstract:
Aiming to address a stable chondrogenesis derived from mesenchymal stromal cells (MSCs) to be applied in cartilage repair strategies at the onset of osteoarthritis (OA), we analyzed the effect of arginine–glycine–aspartate (RGD) density on cell condensation that occurs during the initial phase of chondrogenesis. For this, we seeded MSC-derived from OA and healthy (H) donors in RGD-dendrimer-poly(L-lactic) acid (PLLA) nanopatterned substrates (RGD concentrations of 4 × 10−9, 10−8, 2.5 × 10−8, and 10−2 w/w), during three days and compared to a cell pellet conventional three-dimensional culture system. Molecular gene expression (collagens type-I and II–COL1A1 and COL2A1, tenascin-TNC, sex determining region Y-box9-SOX9, and gap junction protein alpha 1–GJA1) was determined as well as the cell aggregates and pellet size, collagen type-II and connexin 43 proteins synthesis. This study showed that RGD-tailored first generation dendrimer (RGD-Cys-D1) PLLA nanopatterned substrates supported the formation of pre-chondrogenic condensates from OA- and H-derived human bone marrow-MSCs with enhanced chondrogenesis regarding the cell pellet conventional system (presence of collagen type-II and connexin 43, both at the gene and protein level). A RGD-density dependent trend was observed for aggregates size, in concordance with previous studies. Moreover, the nanopatterns’ had a higher effect on OA-derived MSC morphology, leading to the formation of bigger and more compact aggregates with improved expression of early chondrogenic markers.
APA, Harvard, Vancouver, ISO, and other styles
10

Jung, Yeon-Ho, Sang-Keun Sung, Kyung-Min Lee, Srivathsava Surabhi, Jun-Ho Jeong, Eung-sug Lee, Jun-Hyuk Choi, and Jong-Ryul Jeong. "Configurable plasmonic substrates from heat-driven imprint-transferred Ag nanopatterns for enhanced photoluminescence." RSC Advances 5, no. 62 (2015): 50047–53. http://dx.doi.org/10.1039/c5ra05260b.

Full text
Abstract:
Despite substantial progress in metal nanopatterning, fabricating ultra-large-area plasmonic substrates with well-defined and well-controlled nanopatterned arrays remains a major technological challenge.
APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "Nanopatterned substrates"

1

Bock, Henry. "Fluids confined by nanopatterned substrates." [S.l.] : [s.n.], 2001. http://edocs.tu-berlin.de/diss/2001/bock_henry.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Boehm, Heike. "Micromechanical properties and structure of the pericellular coat of living cells modulated by nanopatterned substrates." [S.l. : s.n.], 2008. http://nbn-resolving.de/urn:nbn:de:bsz:16-opus-89646.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Migliorini, Elisa. "Nanostructured substrates to control the Embryonic Stem cells differentiation into neuronal lineage." Doctoral thesis, Università degli studi di Trieste, 2012. http://hdl.handle.net/10077/7367.

Full text
Abstract:
2010/2011
The objective of this project was to develop new nanotechnology-based strategies to increase embryonic stem cells (ESCs) differentiation into neuronal lineage. In particular it was chosen to investigate a nanostructured physical support for in vitro stem cell culture in which both the nanometrical topography and mechanical properties are well controlled and characterized. Nanopatterned substrates were designed to have physical properties as close as possible to the in vivo microenvironment where stem cells normally grow and differentiate based on the assumption that mimicking the natural niche equilibrium is of fundamental importance for stem cell fate. First, an original nanotechnological approach to fabricate the substrates for in vitro neuronal precursors culture was developed. Secondly the substrate geometrical and mechanical parameters were optimized in order to achieve the maximum differentiation yield of ESCs-derived neuronal precursors (NPs). It was reached a neuronal yield of 74±7% at 48 hours after NPs differentiation induction, which represents the highest yield ever published using nanopatterned substrates with controlled and highthroughput reproducible nanometrical features for cell culture. Moreover it was demonstrated that the mechanical properties of the substrate play a major role with respect to other parameters, such as substrate composition and geometry. A time-dependent analysis showed that the first hours after cell seeding are crucial in the determination of the final differentiation yield. A further control of ESCs differentiation by manipulating the substrates physical parameters, required a deep understanding of the cell-substrate interaction, therefore it was studied the behavior of neuronal precursors when placed and grown on different artificial substrates using atomic force microscope, scanning electron microscope, and single cell force spectroscopy measurements. The latter lead to a quantification of the forces that develop between neuronal precursors and substrate and provided a clear relationship between adhesion forces and differentiation. My results suggested the importance of the physical parameter involved in the regulation of the neuronal differentiation and to new guidelines for future applications in regenerative medicine.
XXIV Ciclo
1984
APA, Harvard, Vancouver, ISO, and other styles
4

Gojak, Christian Philip [Verfasser], and Joachim P. [Akademischer Betreuer] Spatz. "Directing Neural Stem Cell Differentiation Using Nanopatterned Substrates and Visualization of the Developing Nervous System / Christian Philip Gojak ; Betreuer: Joachim P. Spatz." Heidelberg : Universitätsbibliothek Heidelberg, 2012. http://d-nb.info/1179784928/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Gojak, Christian P. [Verfasser], and Joachim P. [Akademischer Betreuer] Spatz. "Directing Neural Stem Cell Differentiation Using Nanopatterned Substrates and Visualization of the Developing Nervous System / Christian Philip Gojak ; Betreuer: Joachim P. Spatz." Heidelberg : Universitätsbibliothek Heidelberg, 2012. http://nbn-resolving.de/urn:nbn:de:bsz:16-opus-134511.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Trigoulet, Nicolas. "Probing barrier-type anodic alumina films on nano-patterned substrates." Thesis, University of Manchester, 2010. https://www.research.manchester.ac.uk/portal/en/theses/probing-barriertype-anodic-alumina-films-on-nanopatterned-substrates(7c888ffd-f901-4993-b30d-05fc0a3bf514).html.

Full text
Abstract:
The growth of barrier-type anodic alumina films formed by anodizing relatively rough substrates has been shown to proceed by high field ionic conduction. As a result of the ionic transport and the induced plasticity, smoothing of the oxide surfaces and the metal/oxide interfaces arises. However, such a smoothing model was deduced from topographical observations and, therefore little insight was gained about the transport mechanism leading to the flattening of the anodized specimens. Recently, the development of porous anodic alumina has been demonstrated to proceed by coupled ionic migration and material flow resulting from the field-induced mechanical stress. For rough metal surfaces, the electric field distribution is non-uniform across the specimen surface. Considering the square-dependence of the electrostrictive stress on the electric field and the distribution of the electric field across surface, a significant gradient of mechanical stress may arise across the anodic oxide layer during anodizing. As a result, stress-driven transport may participate, in addition to high field ionic conduction, to the smoothing of the specimen surface. Transport mechanisms were investigated during anodizing of patterned superpure aluminium specimens, by examination of the distributions of incorporated species, used as markers and tracers. The nature of the migration processes have been determined in correlation with the changes in the concentration of the tracer profiles as well as the variations in the anodic oxide film compositions.
APA, Harvard, Vancouver, ISO, and other styles
7

Daher, Mansour Michel. "Transition metal nanolines on a nanopatterned silver substrate : self-organized growth and magnetic properties." Thesis, Aix-Marseille, 2019. http://www.theses.fr/2019AIXM0287.

Full text
Abstract:
L'intérêt pour les propriétés magnétiques des nanostructures de métaux de transition et de lanthanides de faible dimensionnalité n’a cessé de croitre au cours des deux dernières décennies, tant pour leur intérêt en recherche fondamentale que pour la perspective d’applications technologiques. De manière remarquable, les propriétés magnétiques des nanostructures peuvent être ajustées en contrôlant leur géométrie, leur structure atomique et leur environnement chimique. Dans cette thèse, un gabarit 1D composé de nanorubans de Si auto-organisés est utilisé pour guider la croissance de nanolignes de métaux de transition dans le but d’étudier leurs propriétés magnétiques. La géométrie et la structure atomique des nanorubans de Si et des nanolignes de métaux ont été étudiées in situ par microscopie par effet tunnel. Concernant le silicium, notre étude montre qu’une température de 490 K est nécessaire pour obtenir un gabarit 1D hautement ordonné. Les résultats obtenus sur les métaux de transition ont permis de déterminer la géométrie et la structure des nanolignes. Pour accéder aux propriétés magnétiques des nanolignes de Co, des mesures par XMCD ont été effectuées en température, en utilisant différentes orientations du champ magnétique. Les résultats montrent que les deux premières couches de Co adsorbées sur les nanorubans présentent une réponse magnétique faible, tandis que les couches supérieures présentent une aimantation exaltée. Deux axes d’anisotropie dans le plan ont été mis en évidence. Les moments magnétiques et l'énergie d’anisotropie magnétique ont été déterminés quantitativement. Les études en température suggèrent un comportement superparamagnétique
Interest in the magnetic properties of low dimensional transition metal and lanthanide nanostructures has seen an unprecedented rise in the last two decades due to both their fundamental interest and perspectives of technological applications. Remarkably, the magnetic properties of nanostructures can be tuned by controlling their geometry, atomic structure and chemical environments. In this thesis, a one-dimensional template composed of self-organized Si nanoribbons is used to grow transition metal nanolines, prior to the characterization of their magnetic properties. The geometries and the atomic structure of both the Si nanoribbons and the metal nanolines were investigated in situ by scanning tunneling microscopy. The growth mechanisms were investigated by exploring a large set of growth conditions. Regarding the Si growth, our study shows that a temperature of 490 K is necessary to obtain a long-range ordered one-dimensional template. Concerning the transition metal study, the results resolved the nanoline geometries and atomic structures.To access the magnetic properties of the Co nanolines on Si, XMCD measurements were performed using different magnetic field orientations and temperatures.The results show that the first two Co layers directly adsorbed onto the Si nanoribbons present a weak magnetic response while the upper Co layers exhibit an enhanced magnetization. Remarkably, two in-plane easy axes of magnetization were evidenced.The magnetic moments and the magnetic anisotropic energy are determined quantitatively.Temperature-dependent investigations strongly suggest a superparamagnetic behavior
APA, Harvard, Vancouver, ISO, and other styles
8

Ozcelik, Hayriye. "Interaction Between Micro And Nano Patterned Polymeric Surfaces And Different Cell Types." Phd thesis, METU, 2012. http://etd.lib.metu.edu.tr/upload/12614798/index.pdf.

Full text
Abstract:
ABSTRACT INTERACTION BETWEEN MICRO AND NANO PATTERNED POLYMERIC SURFACES AND DIFFERENT CELL TYPES Ö

elik, Hayriye Ph.D., Department of Biology Supervisor: Prof. Dr. Vasif Hasirci Co-Supervisor: Dr. Celestino Padeste August 2012, 139 pages Micro and nanopatterned surfaces are powerful experimental platforms for investigating the mechanisms of cell adhesion, cell orientation, differentiation and they enable significant contributions to the fields of basic cell and stem cell biology, and tissue engineering. In this study, interaction between micro and nanopatterned polymeric surfaces and different cell types was investigated. Three types of micropillars were produced by photolithography (Type 1-3), while nanometer sized pillars were produced in the form of an array by electron beam lithography (EBL). Replica of silicon masters were made of polydimethylsiloxane (PDMS). Polymeric [P(L-D,L)LA and a P(L-D,L)LA:PLGA blend] replica were prepared by solvent casting of these on the PDMS template and used in in vitro studies. The final substrates were characterized by various microscopic methods such as light microscopy, atomic force microscopy (AFM) and scanning electron microscopy (SEM). In order to investigate deformation of the nucleus in response to the physical restrictions imposed by micropillars, Type 1 and Type 2 pillars were used. These substrates were covered with pillars with different interpillar distances. While Type 1 is covered with symmetrically (in X-Y directions) distributed pillars, Type 2 pillars were distributed asymmetrically and the inter-pillar distances were increased. Nuclei deformation of five cell v types, two cancer cell lines (MCF7 and Saos-2), one healthy bone cell (hFOB1.19), one stem cell (bone marrow origined mesemchymal stem cells, BMSCs) and one standard biomaterial test cell type, (L929) fibroblasts was examined by using fluorescence microscopy and SEM. The nuclei of Saos-2 and MCF7 cells were found to be deformed most drastically. Nucleus deformation and intactness of nuclear membrane was examined by Anti- Lamin A staining. The interaction of the cells with micropillars was visualized by labelling focal adhesion complexes (FAC). Wettabilities of patterned and smooth surfaces were determined. As the patterns become denser (closer micropillars, Type 1) the hydrophobicity increased. Similar to water droplets, the cells were mostly spread at the top of the Type 1 pillars. The number of cells spread on the substrate surface was much higher on Type 2 patterned films. In order to support these qualitative findings, nucleus deformation was quantified by image analysis. Frequency of nucleus deformation was determined as the ratio of deformed to the total number of nuclei (%). In order to quantify the intensity of nuclei deformation, their circularity was evaluated. In addition to nucleus deformation, alterations in the ratio of cell area-to-nucleus area in response to micropillars were determined by image analysis. The results indicated that cancerous cells were more deformable. The qualitative microscopic evaluation and the data obtained by quantification of the nucleus and cellular deformation were in good agreement. In addition, the findings were consistent with expectations which suggest that cancerous cells are &ldquo
softer&rdquo
. In the second part of the research the force applied by the cells on arrays of micropillars with high aspect ratios (Type 3 substrates) during tugging at the pillars was investigated. Micropillars were produced using P(L-D,L)LA as well as a 60:40 blend of P(L-D,L)LA with PLGA. The blend is a material with lower stiffness than P(L-D,L)LA. The mechanical properties of the two materials were determined by tensile testing of solvent cast films. Deformation of Type 3 micropillars by the cellular tugging force of Saos-2 and L929 was studied by fluorescence and SEM microscopy, both on stiff and softer substrates. Displacements of the centers nodes of the pillars were evaluated from SEM micrographs. On the stiff surface, the two cell types bent the pillars to the same extent. On the other softer substrate (blends), however, the maximum displacements observed with Saos-2 cells were higher than the ones caused on the stiffer substrate or the ones caused by L929 cells. It is reported that stiffness of the substrate can determine stem cell lineage commitment. In order to examine the effects of change of substrate stiffness on osteogenic differentiation of BMSCs, osteopontin (OPN) expression was determined microscopically. It was found that osteogenic differentiation is enhanced when BMSCs are cultured on P(L-D,L)LA Type 3 pillars. vi In the last part of research, arrays of nanopillars whose interpillar distances systematically varied to form different fields were examined in terms of adhesion and alignment in order to determine the differential adhesion of BMSCs and Saos-2 cells. The difference in their adhesion preference on nanopillar arrays was quantified by image analysis. It was observed that BMSCs and Saos-2 cells behaved in an opposite manner with respect to each other on the fields with the highest density of nanopillars. The BMSCs avoided the most densely nanopillar covered fields and occupied the pattern free regions. The Saos-2, on the other hand, occupied the most densely nanopillar covered fields and left the pattern free regions almost unpopulated. It was also found that both BMSCs and Saos-2 cells aligned in the direction of the shorter distance between the pillars. Both BMSCs and Saos-2 cells started to align on the pillars if the distance in any direction was >
1.5 &mu
m. To better understand the effects of chemical and physical cues, protein coating and material stiffness were tested as two additional parameters. After fibronectin coating, the surfaces of P(L-D,L)LA films with the highly dense pillar covered fields, which were avoided when uncoated, were highly populated by the BMSC. Similarly, decreasing the stiffness of a surface which was normally avoided by the BMSCs made it more acceptable for the cells to attach.
APA, Harvard, Vancouver, ISO, and other styles
9

Eisenhuettenstadt. "Fluids confined by nanopatterned substrates." Phd thesis, 2001. http://edocs.tu-berlin.de/diss/2001/bock_henry.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Bock, Henry [Verfasser]. "Fluids confined by nanopatterned substrates / vorgelegt von Henry Bock." 2001. http://d-nb.info/963162276/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Nanopatterned substrates"

1

Kemper, Ricarda Maria, Donat Josef As, and Jörg K. N. Lindner. "Cubic GaN on Nanopatterned 3C-SiC/Si (001) Substrates." In Silicon-based Nanomaterials, 381–405. New York, NY: Springer New York, 2013. http://dx.doi.org/10.1007/978-1-4614-8169-0_15.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Christian, Joel, and Elisabetta Ada Cavalcanti-Adam. "Chapter 7. Micro- and Nanopatterned Substrates for Studies on the Mechanobiology of Cell–Matrix Adhesions." In Biomaterials Science Series, 135–51. Cambridge: Royal Society of Chemistry, 2022. http://dx.doi.org/10.1039/9781839165375-00135.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Yoda, Minami, Jean-Luc Garden, Olivier Bourgeois, Aeraj Haque, Aloke Kumar, Hans Deyhle, Simone Hieber, et al. "Nanopatterned Substrata." In Encyclopedia of Nanotechnology, 1670. Dordrecht: Springer Netherlands, 2012. http://dx.doi.org/10.1007/978-90-481-9751-4_100534.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Riedl, Thomas, and Jörg K. N. Lindner. "Heteroepitaxy of III–V Zinc Blende Semiconductors on Nanopatterned Substrates." In Nanoscaled Films and Layers. InTech, 2017. http://dx.doi.org/10.5772/67572.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

"Nanopatterned Substrata." In Encyclopedia of Nanotechnology, 2597. Dordrecht: Springer Netherlands, 2016. http://dx.doi.org/10.1007/978-94-017-9780-1_100712.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Nanopatterned substrates"

1

Mawst, L. J., J. H. Park, Y. Huang, J. Kirch, Y. Sin, B. Foran, C. C. Liu, P. F. Nealey, and T. F. Kuech. "Nanopatterned quantum dot active region lasers on InP substrates." In SPIE OPTO, edited by Alexey A. Belyanin and Peter M. Smowton. SPIE, 2011. http://dx.doi.org/10.1117/12.875199.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Mangum, John S., San Theingi, William E. McMahon, and Emily L. Warren. "Understanding improvements in coalesced epilayers grown over nanopatterned substrates." In 2021 IEEE 48th Photovoltaic Specialists Conference (PVSC). IEEE, 2021. http://dx.doi.org/10.1109/pvsc43889.2021.9518463.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Sakhuja, M., J. Son, H. V. Le, X. Baojuan, L. K. Verma, H. C. Zeng, H. Yang, A. J. Danner, and C. S. Bhatia. "Nanopatterned and self-cleaning glass substrates for solar cell packaging." In 2011 2nd International Conference on Control, Instrumentation, and Automation (ICCIA). IEEE, 2011. http://dx.doi.org/10.1109/icciautom.2011.6356637.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Ahn, Dae Up, and Erol Sancaktar. "Fabrication of High Density Silicon Nano-Dots by Excimer Laser Irradiation on Block Copolymer Masks." In ASME 2007 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2007. http://dx.doi.org/10.1115/detc2007-35650.

Full text
Abstract:
We report easy and fast fabrication methods to prepare densely packed polystyrene (PS) and silicon nano-dots using one-step excimer laser irradiation on cylindrically nanopatterned block copolymer materials, without any additional selective etching steps before a non-selective etching. Preferential etching in more ultraviolet (UV)-sensitive block component, and non-selective removal of all block components allowed transferring nanopatterns in block copolymer masks to inorganic silicon substrates, when an appropriate laser intensity was used. Surface melt flows of block components, which severely undermine the initial orders of nanopatterns in a block copolymer mask, were observed at the laser intensity near the ablation threshold of the less UV-sensitive component. Thus, in order to obtain mask-image-like topographic nanopatterns on the target material surfaces, the intensity of excimer laser radiation should be sufficiently lower than the ablation threshold of the less UV-sensitive component as long as the intensity is higher than that of the more UV-sensitive component. Numerical analyses on the photothermal excimer laser ablation in binary mixture systems predicted the presence of a matrix-assisted excimer laser ablation in the less UV-sensitive component at the laser intensity lower than its ablation threshold, owing to the heat conduction from the more UV-sensitive component during the nanoscopic level of time duration.
APA, Harvard, Vancouver, ISO, and other styles
5

He, Yunrui, Jun Wang, Haiyang Hu, Qi Wang, Yongqing Huang, and Xiaomin Ren. "Selective growth and coalescence of GaAs on Si (001) substrates using a round-hole nanopatterned SiO2 mask." In Frontiers in Optics. Washington, D.C.: OSA, 2015. http://dx.doi.org/10.1364/fio.2015.fth4b.4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Garner, Grant, Lance Williamson, Robert Seidel, Paulina Rincon Delgadillo, Su-Mi Hur, Roel Gronheid, Paul F. Nealey, and Juan J. de Pablo. "The effects of geometry and chemistry of nanopatterned substrates on the directed self-assembly of block-copolymer melts." In SPIE Advanced Lithography, edited by Douglas J. Resnick and Christopher Bencher. SPIE, 2015. http://dx.doi.org/10.1117/12.2085987.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Hyunjong Jin, Austin Hsiao, and Logan Liu. "Integrated hydrophobic and hydrophilic substrate by nanopatterned surfaces." In 2010 Ninth IEEE Sensors Conference (SENSORS 2010). IEEE, 2010. http://dx.doi.org/10.1109/icsens.2010.5690542.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Zhao, Jiacheng, Francis J. McCallum, Zhen Jiang, Joshua A. Kaitz, James F. Cameron, Peter Trefonas, Idriss Blakey, Hui Peng, and Andrew K. Whittaker. "Spatial arrangement of block copolymer nanopatterns using photoactive homopolymer substrates." In Advances in Patterning Materials and Processes XXXVIII, edited by Douglas Guerrero and Daniel P. Sanders. SPIE, 2021. http://dx.doi.org/10.1117/12.2586516.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Hosseini, Amir Ehsan, Subir Bhattacharjee, and Eric M. V. Hoek. "Colloidal Interactions for Nanopatterned Surfaces Based on Surface Element Integration (SEI) Approach." In ASME 2010 International Mechanical Engineering Congress and Exposition. ASMEDC, 2010. http://dx.doi.org/10.1115/imece2010-38781.

Full text
Abstract:
In this study, van der Waals and electrostatic interaction energies on a nanopatterned rough surface was investigated. Surface element integration method (SEI) was applied to determine the interaction between a nanostructured substrate and an infinite flat plate. Hemispherical protrusions or depressions were mathematically generated on a square lattice to represent the rough surface. The size of the asperities and the pitch (separation) between their centers were varied. From the above calculations, we have analyzed the coupling between the range of the interactions and the roughness features of the substrate by comparing the ratios of the rough surface to smooth surface interaction energies per unit area. At small separations, the rough surface van der Waals interaction is seriously attenuated in the presence of protruding asperities. This attenuation is less pronounced for depressions. The attenuation of the van der Waals interaction due to asperities diminishes at large separations. In contrast, attenuation of the electrostatic interaction is independent of the separation.
APA, Harvard, Vancouver, ISO, and other styles
10

Ko, Jiwoo, Jun-Ho Jeong, and Inkyu Park. "Direct Transfer of Nanopatterned Functional Materials onto Textile Substrate for Optical and Sensing Applications." In 2020 IEEE 33rd International Conference on Micro Electro Mechanical Systems (MEMS). IEEE, 2020. http://dx.doi.org/10.1109/mems46641.2020.9056189.

Full text
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography