Journal articles: 'Nano-interface'

1

Ramsden, J. J. "The bio–nano interface." Nanotechnology Perceptions 5, no. 2 (July 30, 2009): 151–65. http://dx.doi.org/10.4024/n11ra09a.ntp.05.02.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Ostrikov, Kostya (Ken). "Plasma-nano-interface in perspective: from plasma-for-nano to nano-plasmas." Plasma Physics and Controlled Fusion 61, no. 1 (November 21, 2018): 014028. http://dx.doi.org/10.1088/1361-6587/aad770.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Zhang, Liqiang, Ping Yang, Chun Li, Xuenan Wang, Xialong Li, and Yanfang Zhao. "Comparison Approach on Mechanical Behavior of Al /Cr Nano-Interface and Cu/Cr Nano-Interface." Current Nanoscience 8, no. 5 (October 1, 2012): 715–19. http://dx.doi.org/10.2174/157341312802884526.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

NISHINO, Takashi. "Nano Analyses of Polymer/Polymer Interface." Journal of the Japan Society of Colour Material 87, no. 11 (2014): 410–14. http://dx.doi.org/10.4011/shikizai.87.410.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Leszczynski, Jerzy. "Nano meets bio at the interface." Nature Nanotechnology 5, no. 9 (September 2010): 633–34. http://dx.doi.org/10.1038/nnano.2010.182.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Prinz Setter, Ofer, and Ester Segal. "Halloysite nanotubes – the nano-bio interface." Nanoscale 12, no. 46 (2020): 23444–60. http://dx.doi.org/10.1039/d0nr06820a.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Ibach, Harald, Guillermo Beltramo, and Margret Giesen. "Interface capacitance of nano-patterned electrodes." Surface Science 605, no. 1-2 (January 2011): 240–47. http://dx.doi.org/10.1016/j.susc.2010.10.025.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Lin, Ziliang, Wenting Zhao, Lindsey Hanson, Chong Xie, Yi Cui, and Bianxiao Cui. "At the Nano-Bio Interface: Probing Live Cells with Nano Sensors." Biophysical Journal 106, no. 2 (January 2014): 225a. http://dx.doi.org/10.1016/j.bpj.2013.11.1318.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Kumar, Kakara S. J., M. V. Seshagiri Rao, V. Srinivasa Reddy, and S. Shrihari. "Performance evaluation of nano-silica concrete." E3S Web of Conferences 184 (2020): 01076. http://dx.doi.org/10.1051/e3sconf/202018401076.

Full text

Abstract:

In this paper, the study of the influence of nano-silica (nano-SiO2) on the properties of the interface between CSH gel and cement particles and its effect on nano-mechanical properties of the products at the interface zone was examined. In this paper M50 grade SCC mixes were developed using 5% micro-silica and various percentages of 0.5%, 1.0% and 1.5% nano-SiO2. For 1.0% nano-SiO2 addition to M50 grade SCC mix, the compressive strength is maximum. Similarly concrete quality using non-destructive techniques, water absorbtion capacity and porosity are also assessed.

APA, Harvard, Vancouver, ISO, and other styles

10

Du, Zhihong, Xinhua Ni, Xiequan Liu, Zhaogang Cheng, Yunwei Fu, and Jinfeng Yu. "Strength model for composite ceramics with nano-interface and micro-interface." Composite Interfaces 26, no. 4 (August 2018): 357–77. http://dx.doi.org/10.1080/09276440.2018.1504194.

Full text

APA, Harvard, Vancouver, ISO, and other styles

11

Luo, Dong Mei, Ying Long Zhou, Hong Yang, and Li Fen Li. "Two-Scale Analysis for the Mechanical Properties of Nano-Composites with Non-Linear Interface." Advanced Materials Research 168-170 (December 2010): 2498–502. http://dx.doi.org/10.4028/www.scientific.net/amr.168-170.2498.

Full text

Abstract:

Combining the cohesive zone elements into the two-scale homogenization method, the effective mechanical properties of nano-composites with a non-linear interface are analyzed. A periodic microscopic representative volume element (RVE) is modeled using a four-phase composite composed of matrix, nano-tube, bonded, and debonded interfaces. The debonded interface is simultaneously considered as bilinear plastic material satisfying the von Mises conditions in the presented algorithm, and a simple elastic–plastic constitutive model is established to study the non-linear effective elastic properties of nano-composites and equivalent stress for interface and nano-tube. The predicted results show a strong non-linear dependence of the effective mechanical properties on the interfacial modulus and yield stress.

APA, Harvard, Vancouver, ISO, and other styles

12

Kitamura, Takayuki, Hiroyuki Hirakata, and Yoshimasa Takahashi. "Interface Strength of Low-Dimensional Nano-Components." Key Engineering Materials 353-358 (September 2007): 1–8. http://dx.doi.org/10.4028/www.scientific.net/kem.353-358.1.

Full text

Abstract:

The interface strength of low-dimensional nano-components such as films and islands formed on substrates has been investigated in this project, and the focus is put on the mechanics of crack initiation from the free interface edge and propagation along the interface. The series of experiments elucidates the applicability of fracture mechanics concept on the structures. We proposed experimental methods for evaluating the initiation strength of an interface crack in submicron films and islands deposited on substrates. The initiation is governed by the singular stress field, and the criterion is prescribed by the stress intensity parameter. Using special loading apparatus built in a TEM, we developed a crack initiation method for nano-components and the role of plasticity on the delamination is clarified. Subcritical crack growth along an interface between submicron films under fatigue was also investigated by modified four-point bend method.

APA, Harvard, Vancouver, ISO, and other styles

13

Mohapatra, Shyam S. "EDITORIAL: NANOBIO COLLABORATIVE EXPLORES NANO-BIO INTERFACE." Technology & Innovation 13, no. 1 (January 1, 2011): 1–3. http://dx.doi.org/10.3727/194982411x13003853540117.

Full text

APA, Harvard, Vancouver, ISO, and other styles

14

Torimitsu, Keiichi. "Nano-Bio Interface - Neural & Molecular Functions." Advances in Science and Technology 53 (October 2006): 91–96. http://dx.doi.org/10.4028/www.scientific.net/ast.53.91.

Full text

Abstract:

This paper briefly introduces the nano-bio related-research being carried out in our research group. The work is based on a fusion of neuroscience and bio-molecular science with nanotechnology. This interdisciplinary research is extremely promising for creating a new technology and developing a new knowledge. Nano-bio research could be a key to understanding the signal processing mechanism that lies behind memory and the learning system in our brain. Developing a novel biocompatible device that runs with biological functions is one of our research goals.

APA, Harvard, Vancouver, ISO, and other styles

15

Rouse, Ian, David Power, Erik G. Brandt, Matthew Schneemilch, Konstantinos Kotsis, Nick Quirke, Alexander P. Lyubartsev, and Vladimir Lobaskin. "First principles characterisation of bio–nano interface." Physical Chemistry Chemical Physics 23, no. 24 (2021): 13473–82. http://dx.doi.org/10.1039/d1cp01116b.

Full text

Abstract:

We present a multiscale computational approach for the first-principles study of bio-nano interactions. Using titanium dioxide as a case study, we evaluate the affinity of titania nanoparticles to water and biomolecules through atomistic and coarse-grained techniques.

APA, Harvard, Vancouver, ISO, and other styles

16

SAITOH, Ken-ichi, Yuki TATEOKA, Noboru SHINKE, Hayato FUKUMOTO, and Masato TANAKA. "SPIN Simulation of Nano-scale Materials Interface." Proceedings of The Computational Mechanics Conference 2004.17 (2004): 763–64. http://dx.doi.org/10.1299/jsmecmd.2004.17.763.

Full text

APA, Harvard, Vancouver, ISO, and other styles

17

Wang, Jing, Waseem Akthar Quershi, Yiye Li, Jianxun Xu, and Guangjun Nie. "Analytical methods for nano-bio interface interactions." Science China Chemistry 59, no. 11 (October 14, 2016): 1467–78. http://dx.doi.org/10.1007/s11426-016-0340-1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

18

LIANG, JIACHANG, LIPING ZHANG, ZHIPING WANG, YIFEI CHEN, CHAOHUI JI, YANYAN ZHANG, PENG ZHANG, et al. "PREPARATION OF GRADATED NANO-TRANSIENT LAYER AT INTERFACE BETWEEN DEPOSITED FILM AND SUBSTRATE BY HIGH-INTENSITY PULSED ION BEAM IRRADIATION." Surface Review and Letters 17, no. 05n06 (October 2010): 463–68. http://dx.doi.org/10.1142/s0218625x10014296.

Full text

Abstract:

We prepared gradated nano-transient layers at different interfaces between deposited film and substrates by high-intensity pulsed ion beam (HIPIB) irradiation. The deposited film was ( Al–Si ) alloy and substrates were Ni and Ti , respectively. The gradated nano-transient layers at different interfaces were measured by Rutherford backscattering, its spectra were solved by SIMNRA code and then the microstructures of the gradated nano-transient layers at the interfaces of these two irradiated samples were obtained. The experimental results were analyzed by STEIPIB code. The formation of the gradated distribution of element contents in nano-transient layer at the interface can eliminate the abrupt changes of thermal and elastic characteristics at the interface. And, it can greatly reduce the mismatch of thermal expansion coefficients and Young's modulus at the interface between deposited film and substrate. Thus, after the formation of the gradated nano-transient layer, the adhesion at the interface between different materials can be enhanced and the level of thermal stresses can also be reduced in the case of thermal loading.

APA, Harvard, Vancouver, ISO, and other styles

19

Shen, Ying Ming, Fang Juan Qi, Min Xie, and Jian Li. "The Effect of Nano-Cu Particles on Mechanical Properties of Micro-Joining Joint with Lead-Free Solder." Advanced Materials Research 291-294 (July 2011): 929–33. http://dx.doi.org/10.4028/www.scientific.net/amr.291-294.929.

Full text

Abstract:

The effect of nano-Cu particles on mechanical bend reliability of micro-joining joint with Sn-3.5Ag lead free solder was studied in this paper. The results show that 0.5% nano-Cu composite lead free solder show significantly better shearing strength and mechanical bend fatigue properties than eutectic Sn-3.5Ag solder paste, 1.0% nano-Cu composites and 1.5% nano-Cu composites. The further analysis shows that adding nano-Cu particles make much effect on intermetallic (IMC) in the interface of micro-joint and the inside of the solder joint. The different interface of micro-joining joint induced different mechanical properties.

APA, Harvard, Vancouver, ISO, and other styles

20

Luo, Dong Mei, Ying Long Zhou, Wen Liang Zhu, and Wen Xue Wang. "The Influence of Debonding Interface on the Effective Mechanical Properties for Nano-Composites." Advanced Materials Research 415-417 (December 2011): 557–61. http://dx.doi.org/10.4028/www.scientific.net/amr.415-417.557.

Full text

Abstract:

Combining the contact elements into the two-scale homogenization method, the effective mechanical properties of nano-composites with a debonding interface are analyzed. A periodic microscopic representative volume element (RVE) is modeled by using a four-phase composite composed of matrix, nano-tube, bonded, and debonding interfaces. The initial stress and coulomb's friction are considered within debonding interface, which is applied to transfer the shear stress produced by the relative slip between nano-tube and matrix, and a simple elastic–plastic constitutive model is established to study the effective mechanical properties of nano-composites. The predicted results show a strong non-linear dependence of the effective mechanical properties on the elastic modulus, volume fraction, debonding length and the ratio of length with thickness of interface.

APA, Harvard, Vancouver, ISO, and other styles

21

Ou, Jou-Chun, Yi-Yun Tsai, Ting-Chun Lin, Chin-Li Kao, Shih-Chieh Hsiao, Fei-Ya Huang, and Jui-Chao Kuo. "Thermal stability and bonding interface in Cu/SiO₂ hybrid bonding on nano-twinned copper." AIP Advances 12, no. 6 (June 1, 2022): 065201. http://dx.doi.org/10.1063/5.0088158.

Full text

Abstract:

Cu/SiO2 hybrid bonding has been developed for the application of heterogeneous bond interfaces in 3D integrated circuits in which thermal stability and bonding behavior are important. Thus, nano-twinned Cu (NT-Cu) is selected as the bonding material, and the thermal stability of NT-Cu and the bonding behavior of the interface between NT-Cu are investigated using a scanning electron microscope, electron backscatter diffraction, and focused ion beam. In addition to the microstructure analysis, nano-indentation and nano-scratch are employed to characterize the mechanical properties of the matrix and the interface between NT-Cu. As the bonding temperature increases from 200 to 300 °C for NT-Cu, the average grain sizes increase from 0.64 to 0.87 µm, and the rate of grain coarsening increases from 0.14 to 0.25 µm/h1/2. In addition, the fraction of voids at the bonding interface for NT-Cu interconnects decreases from 0.814% to 0.005%, and the penetration depth increases from 228 to 745 nm with an increase in the temperature from 200 to 300 °C. The hardness of the bonding interface obtained by nano-scratch and nano-indentation array testing is ∼1.8 GPa.

APA, Harvard, Vancouver, ISO, and other styles

22

Yu, Guang, Yujia Cheng, and Xiaohong Zhang. "The Dielectric Properties Improvement of Cable Insulation Layer by Different Morphology Nanoparticles Doping into LDPE." Coatings 9, no. 3 (March 21, 2019): 204. http://dx.doi.org/10.3390/coatings9030204.

Full text

Abstract:

Low density polyethylene (LDPE) doped with inorganic nano-MMT and nano-ZnO particles improved the dielectric properties of the cable insulation layer. In this article, nano-MMT/LDPE and nano-ZnO/LDPE composites were prepared by polymer intercalation and melt blending, respectively. The octadecyl quaternary ammonium salt and silane coupling agent were applied for surface modification in nano-MMT and nano-ZnO particles, and this then improved the compatibility of nanoparticles and polymeric matrix. These samples were characterized by FTIR, PLM, DSC and TSC, from which the effect of nanoparticles doping on polymer crystal habit and interface traps would be explored. In these experiments, the AC breakdown characteristics and space charge characteristic of different composites were studied. The experimental results showed that the interface bonding of nanoparticles and polymer was improved by coupling agents modifying. The dispersion of nanoparticles in matrix was better. When the mass fraction of nanoparticles doping was 3 wt.%, the crystallization rate and crystallinity of composites increased, and the crystalline structure was more complete. Besides, the amorphous regions in material decreased and the conducting channel was circuitous. At this time, the breakdown field strength of nano-MMT/LDPE and nano-ZnO/LDPE increased by 10.3% and 11.1%, compared to that of pure LDPE, respectively. Furthermore, the density and depth of interface traps in polymer increased with nanoparticles doping. Nano-MMT and nano-ZnO could both restrain the space charge accumulation, and the inhibiting effect of nano-ZnO was more visible.

APA, Harvard, Vancouver, ISO, and other styles

23

Al-Mufti, A. Wesam, U. Hashim, Md Mijanur Rahman, and Tijjani Adam. "Nano–bio interface: the characterization of functional bio interface on silicon nanowire." Microsystem Technologies 21, no. 8 (July 20, 2014): 1643–49. http://dx.doi.org/10.1007/s00542-014-2241-5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

24

Yin, Xinfeng, Ming Zhang, Lei Wang, and Yang Liu. "Interface debonding performance of precast segmental nano-materials based concrete (PSNBC) beams." Materials Express 10, no. 8 (August 1, 2020): 1317–27. http://dx.doi.org/10.1166/mex.2020.1734.

Full text

Abstract:

The precast segmental concrete (PSC) structures and the nano-materials based concrete beams are widely applied to civil engineering. On the other hand, it is well known that nano-materials have physical effects and can significantly improve the concrete properties of cement-based materials. Therefore, the interface debonding performance of precast segmental nano-materials based concrete (PSNBC) beams is investigated in this study. Two concrete specimens with nano-materials and one concrete specimen without nano-materials were prepared and bonded into PSC beams with a high strength epoxy adhesive. The smart aggregates (SAs) made of piezoceramic Lead Zirconate Titanate (PZT) and concrete are used as the intelligent transducer of monitoring test specimen. The PSC beam was loaded periodically by screw jack to simulate the random debonding damage of different degrees. The experimental results show that the interface debonding performance of the concrete specimens with nano-materials is significantly enhanced and better than that of concrete specimens without nano-materials.

APA, Harvard, Vancouver, ISO, and other styles

25

Koumoulos, E. P., S. A. M. Tofail, C. Silien, D. De Felicis, R. Moscatelli, D. A. Dragatogiannis, E. Bemporad, M. Sebastiani, and C. A. Charitidis. "Metrology and nano-mechanical tests for nano-manufacturing and nano-bio interface: Challenges & future perspectives." Materials & Design 137 (January 2018): 446–62. http://dx.doi.org/10.1016/j.matdes.2017.10.035.

Full text

APA, Harvard, Vancouver, ISO, and other styles

26

Ratiu, Cristian, Adrian Almasi, Anca Porumb, and Alexandrina Muntean. "Nano Filler Composite Restorations Marginal Adaptation. Direct and indirect assessment." Materiale Plastice 54, no. 1 (March 30, 2017): 56–59. http://dx.doi.org/10.37358/mp.17.1.4785.

Full text

Abstract:

Marginal adaptation at composite enamel interface was assessed through direct clinical method, three-dimensional scanning and optical microscopy respectively for three composite materials with Nano filler: Tetric EvoCeram� (Ivoclar Vivadent-), Premise (Kerr Corp.) and experimental material C20 (�Raluca Ripan� Chemistry Research Institute, Cluj-Napoca). Clinical evaluation of marginal adaptation highlights at 6 months and at 12 months a rate of 25-40% marginal defects, regardless the Nano composite material used. Characterisation of interface between Nano-composite material and dental tissue requires a complex multifactorial assessment.

APA, Harvard, Vancouver, ISO, and other styles

27

Du, Chang Hua, Ming Tang, Gui Sheng Gan, Tao Wang, Wen Chao Huang, Ming Ming Cao, and Chun Tian Li. "Effects of Nano-Particles on Properties of Electronic Solders." Applied Mechanics and Materials 236-237 (November 2012): 31–37. http://dx.doi.org/10.4028/www.scientific.net/amm.236-237.31.

Full text

Abstract:

It is analyzed that the mechanisms of nano-particles impact on melting temperature, wet ability, and mechanical properties of electronic solders, based on the characteristics of nano-particles, the crystal lattice structure and the interaction between particles and the matrix. The results indicates that if the interface between nano-particles and the matrix is low-energy state, it increases melting temperature of composite solders on ignoring the dissolution of nano-particles, conversely, the high-energy state reduces it. When nano-particles form appropriate frame structure in the liquid solder, the emergence of capillary adsorption can enhance the wettability, the strengthening mechanisms of nano-particles on solder include the Phase II enhancement, grain boundary strengthening and solid-solution strengthening. During the brazing process, nano-particles hinder the diffusion of atoms and reduce the dissolution rate of base materials in liquid solders, to inhibit the growth of the intermetallic compounds (IMC) of interface, thereby enhancing the strength and reliability of joints.

APA, Harvard, Vancouver, ISO, and other styles

28

Zhang, Qing, Guangwei Hu, Weiliang Ma, Peining Li, Alex Krasnok, Rainer Hillenbrand, Andrea Alù, and Cheng-Wei Qiu. "Interface nano-optics with van der Waals polaritons." Nature 597, no. 7875 (September 8, 2021): 187–95. http://dx.doi.org/10.1038/s41586-021-03581-5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

29

Liang, Jieying, and Kang Liang. "Nano-bio-interface engineering of metal-organic frameworks." Nano Today 40 (October 2021): 101256. http://dx.doi.org/10.1016/j.nantod.2021.101256.

Full text

APA, Harvard, Vancouver, ISO, and other styles

30

Hennig, Andreas, Sheshanath Bhosale, Naomi Sakai, and Stefan Matile. "CD Methods Development at the Bio-Nano Interface." CHIMIA International Journal for Chemistry 62, no. 6 (June 25, 2008): 493–96. http://dx.doi.org/10.2533/chimia.2008.493.

Full text

APA, Harvard, Vancouver, ISO, and other styles

31

Watanabe, Hirobumi, Hirokazu Takahashi, Masayuki Nakao, Kerry Walton, and Rodolfo R. Llinás. "Intra-Vascular Neural Interface with Nano-Wire Electrode." IEEJ Transactions on Electronics, Information and Systems 127, no. 10 (2007): 1537–43. http://dx.doi.org/10.1541/ieejeiss.127.1537.

Full text

APA, Harvard, Vancouver, ISO, and other styles

32

Ye, J. T., Y. J. Zhang, Y. Kasahara, and Y. Iwasa. "Interface transport properties in ion-gated nano-sheets." European Physical Journal Special Topics 222, no. 5 (July 2013): 1185–201. http://dx.doi.org/10.1140/epjst/e2013-01914-0.

Full text

APA, Harvard, Vancouver, ISO, and other styles

33

Yoshida, Y., K. Yoshihara, N. Nagaoka, S. Hayakawa, Y. Torii, T. Ogawa, A. Osaka, and B. Van Meerbeek. "Self-assembled Nano-layering at the Adhesive Interface." Journal of Dental Research 91, no. 4 (February 1, 2012): 376–81. http://dx.doi.org/10.1177/0022034512437375.

Full text

Abstract:

According to the ‘Adhesion–Decalcification’ concept, specific functional monomers within dental adhesives can ionically interact with hydroxyapatite (HAp). Such ionic bonding has been demonstrated for 10-methacryloyloxydecyl dihydrogen phosphate (MDP) to manifest in the form of self-assembled ‘nano-layering’. However, it remained to be explored if such nano-layering also occurs on tooth tissue when commercial MDP-containing adhesives (Clearfil SE Bond, Kuraray; Scotchbond Universal, 3M ESPE) were applied following common clinical application protocols. We therefore characterized adhesive-dentin interfaces chemically, using x-ray diffraction (XRD) and energy-dispersive x-ray spectroscopy (EDS), and ultrastructurally, using (scanning) transmission electron microscopy (TEM/STEM). Both adhesives revealed nano-layering at the adhesive interface, not only within the hybrid layer but also, particularly for Clearfil SE Bond (Kuraray), extending into the adhesive layer. Since such self-assembled nano-layering of two 10-MDP molecules, joined by stable MDP-Ca salt formation, must make the adhesive interface more resistant to biodegradation, it may well explain the documented favorable clinical longevity of bonds produced by 10-MDP-based adhesives.

APA, Harvard, Vancouver, ISO, and other styles

34

ITO, Yoshihiro. "Creation of Functional Surfaces by Nano Interface Technology." KOBUNSHI RONBUNSHU 65, no. 1 (2008): 6–19. http://dx.doi.org/10.1295/koron.65.6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

35

Leventis, Nicholas, Sudhir Mulik, Xiaojiang Wang, Amala Dass, Chariklia Sotiriou-Leventis, and Hongbing Lu. "Stresses at the Interface of Micro with Nano." Journal of the American Chemical Society 129, no. 35 (September 2007): 10660–61. http://dx.doi.org/10.1021/ja074010c.

Full text

APA, Harvard, Vancouver, ISO, and other styles

36

Tsukagoshi, Kazuhito, Iwao Yagi, and Yoshinobu Aoyagi. "Nano-scale interface controls for future plastic transistors." Science and Technology of Advanced Materials 7, no. 3 (January 2006): 231–36. http://dx.doi.org/10.1016/j.stam.2006.01.001.

Full text

APA, Harvard, Vancouver, ISO, and other styles

37

Shang, Li, and G. Ulrich Nienhaus. "Small fluorescent nanoparticles at the nano–bio interface." Materials Today 16, no. 3 (March 2013): 58–66. http://dx.doi.org/10.1016/j.mattod.2013.03.005.

Full text

APA, Harvard, Vancouver, ISO, and other styles

38

Zhang, Longyan, Jinliang Xu, Qicheng Chen, and Sheng Wang. "Switchable heat transfer in nano Janus-interface-system." International Journal of Heat and Mass Transfer 127 (December 2018): 761–71. http://dx.doi.org/10.1016/j.ijheatmasstransfer.2018.07.090.

Full text

APA, Harvard, Vancouver, ISO, and other styles

39

Nel, Andre E., Lutz Mädler, Darrell Velegol, Tian Xia, Eric M. V. Hoek, Ponisseril Somasundaran, Fred Klaessig, Vince Castranova, and Mike Thompson. "Understanding biophysicochemical interactions at the nano–bio interface." Nature Materials 8, no. 7 (June 14, 2009): 543–57. http://dx.doi.org/10.1038/nmat2442.

Full text

APA, Harvard, Vancouver, ISO, and other styles

40

Pulido-Reyes, Gerardo, Francisco Leganes, Francisca Fernández-Piñas, and Roberto Rosal. "Bio-nano interface and environment: A critical review." Environmental Toxicology and Chemistry 36, no. 12 (October 20, 2017): 3181–93. http://dx.doi.org/10.1002/etc.3924.

Full text

APA, Harvard, Vancouver, ISO, and other styles

41

Huang, Bo Fen, Jun Jie Wang, Han Xun Liang, and Zhi Yuan Li. "Study on the Preparation and Properties of Nano-SiC/MC Nylon 6 Composites." Advanced Materials Research 583 (October 2012): 62–65. http://dx.doi.org/10.4028/www.scientific.net/amr.583.62.

Full text

Abstract:

Nano-SiC/MC nylon6 (MCPA6) composites were prepared by in situ anionic polymerization，followed by properties’ characterization of composites and morphology. FTIR shows that there is no change in the functional groups of MCPA6 by adding nano- SiC and only physical interaction happening in the composites. SEM reveales that bonding state of the two-phase interface of the composites has been affected by the ratio of nano-SiC. Nano-SiC (2.5 wt-%) is fine dispersed in MCPA6 matrix, which enhances interface compatibility and bind strength between nano-SiC and MCPA6, the best comprehensive properties of the composite are obtained. Comparing with untreated MCPA6, the notched Izod impact strength, tensile strength and flexural strength are respectively increased by 208.8%, 81.1% and 27.9%, while the Vicat softening temperature is increased by 20.2%.

APA, Harvard, Vancouver, ISO, and other styles

42

Li, Jianhang, Guanbin Gao, Xintong Tang, Meng Yu, Meng He, and Taolei Sun. "Isomeric Effect of Nano-Inhibitors on Aβ40 Fibrillation at The Nano-Bio Interface." ACS Applied Materials & Interfaces 13, no. 4 (January 25, 2021): 4894–904. http://dx.doi.org/10.1021/acsami.0c21906.

Full text

APA, Harvard, Vancouver, ISO, and other styles

43

SUMIGAWA, Takashi, and Takayuki KITAMURA. "322 Fatigue Strength of Cu Nano Film/Si substrate interface in Nano-components." Proceedings of Conference of Kansai Branch 2012.87 (2012): _3–33_. http://dx.doi.org/10.1299/jsmekansai.2012.87._3-33_.

Full text

APA, Harvard, Vancouver, ISO, and other styles

44

Sun, Kai, Ping Zhu, Pinliang Zhang, Qiang Zhang, Puzhen Shao, Zhijun Wang, Wenshu Yang, et al. "Dispersion and Preparation of Nano-AlN/AA6061 Composites by Pressure Infiltration Method." Nanomaterials 12, no. 13 (June 30, 2022): 2258. http://dx.doi.org/10.3390/nano12132258.

Full text

Abstract:

Nanomaterials play an important role in metal matrix composites (MMC). In this study, 3.0 wt.%, 6.0 wt.%, and 9.0 wt.% nano-AlN-particles-reinforced AA6061 (nano-AlN/AA6061) composites were successfully prepared by pressure infiltration technique and then hot extruded (HE) at 500 °C. The microstructural characterization of the composites after HE show that the grain structure of the Al matrix is significantly refined, varying from 2 to 20 μm down to 1 to 3 μm. Nano-AlN particles in the composites are agglomerated around the matrix, and the distribution of nano-AlN is improved after HE. The interface between AA6061 and nano-AlN is clean and smooth, without interface reaction products. The 3.0 wt.% nano-AlN/AA6061 composite shows an uppermost yield and supreme tensile strength of 333 MPa and 445 MPa, respectively. The results show that the deformation procedure of the composite is beneficial to the further dispersion of nano-AlN particles and improves the strength of nano-AlN/AA6061 composite. At the same time, the strengthening mechanism active in the composites was discussed.

APA, Harvard, Vancouver, ISO, and other styles

45

Jiang, Nan, Songsong Zhu, Jihua Li, Li Zhang, Yunmao Liao, and Jing Hu. "Development of a novel biomimetic micro/nano-hierarchical interface for enhancement of osseointegration." RSC Advances 6, no. 55 (2016): 49954–65. http://dx.doi.org/10.1039/c6ra03183h.

Full text

APA, Harvard, Vancouver, ISO, and other styles

46

Chang, Chien-Min, Ching-Han Hsu, Yi-Wei Liu, Tzu-Chiao Chien, Chun-Han Sung, and Ping-Hung Yeh. "Interface engineering: broadband light and low temperature gas detection abilities using a nano-heterojunction device." Nanoscale 7, no. 47 (2015): 20126–31. http://dx.doi.org/10.1039/c5nr05879a.

Full text

APA, Harvard, Vancouver, ISO, and other styles

47

Wu, Yan, B. Y. Zong, and M. T. Wang. "A Simulation of the Abnormal Grain Growth in a Nano-Structural AZ31 Mg Alloy by Phase Field Model." Materials Science Forum 633-634 (November 2009): 697–705. http://dx.doi.org/10.4028/www.scientific.net/msf.633-634.697.

Full text

Abstract:

Abnormal grain growth was simulated by phase field model in order to find ways of producing scattered a few enormous grains in a nano-structural single phase AZ31 alloy to improve its ductility. It is shown that the abnormal grain growth is controlled by the three keys factors of interface energy, strain restored energy and interface mobility. Therefore, the microstructure with scattered a few enormous grains in the nano-structural matrix can be achieved after an annealing treatment if there is a small group of specially orientated nano-size grains in the original nao-structure with local low grain boundary energy or local high strain energy or local high interface mobility. The morphology of abnormal grains is also examined as function of annealing time to optimize the microstructure.

APA, Harvard, Vancouver, ISO, and other styles

48

Ito, Kyosuke, Hui Jang, Koji Sakashita, and Sachio Asaoka. "Catalysis at the interface of nano-oxides and nanozeolites." Pure and Applied Chemistry 80, no. 11 (January 1, 2008): 2273–82. http://dx.doi.org/10.1351/pac200880112273.

Full text

Abstract:

The catalysts that can efficiently hydro-reform higher n-paraffin to lower isoparaffins for environmentally friendly gasoline were studied. The catalysts were examined by the conversion of n-hexadecane, n-C16H34 to i-C6H14~i-C12H26. The tri-modally nanoporous (nanometer-size) catalysts composed of (Ni-Mo)/[γ-Al2O3], nano-oxide, and nanocrystalline zeolite have some active and selective performances because of the cooperation between (Ni-Mo)/[γ-Al2O3] and the composite of nano-oxide-nanozeolite. The (Ni-Mo)/[γ-Al2O3] component holding the skeletal isomerization activity enhances the cracking activity on the composite of nanoporous (np)-Al2O3-USY (ultra-stable Y-type zeolite) to result in i-C6H14~i-C12H26 as the isomerization of n-hexadecane followed the cracking reaction. The catalyst composed of nanocrystalline BEA (beta-type zeolite) or MFI (ZSM-5-type zeolite) zeolite can be more activated with the nano-SiO2 than with the nano-Al2O3. The catalyst composed of the dealuminated zeolite, USY (SiO2/Al2O3 = 12) cannot be activated with the nano-SiO2 but with the nano-Al2O3. This activation depends on the SiO2/Al2O3 ratio of the USY. It is considered that the catalytic property of the three components is partially due to the novel active sites formed concertedly at the interface of the nano-oxides and the nanozeolites. The novel sites have a major role for the isomerization and cracking as the moderate and strong acids and are generated when Si-OH in the nanopores of the USY resulted from the dealumination catches Al-OH in the nano-Al2O3 to form Si-O-Al-O-Al-O-Si instead of Si-O-Al-O-Si-O-Si-O.

APA, Harvard, Vancouver, ISO, and other styles

49

Ling, Cuicui, Bingxin Feng, Xiaomeng Wang, Lingtan Zhang, Tuo Zhang, Min Cao, Daoyong Yu, et al. "A tin oxide/silicon heterojunction with a nano litchi shell structure for ultrafast, high-detectivity, self-powered broadband photodetectors." Journal of Materials Chemistry C 10, no. 6 (2022): 2049–59. http://dx.doi.org/10.1039/d1tc05604b.

Full text

Abstract:

We develop an ultrafast, high-detectivity, self-powered broadband PD based on SnO2 nano litchi shell structure/n-Si heterojunction. The excellent performance attributed to the SnO2 nano litchi shell structure, and meaningful interface barrier.

APA, Harvard, Vancouver, ISO, and other styles

50

Li, Fei, Yuanyuan Chen, Xin Chen, Cai Li, and Yuan Huang. "The Improvement of Bonding Strength of W/Cu Joints via Nano-Treatment of the W Surface." Metals 11, no. 5 (May 20, 2021): 844. http://dx.doi.org/10.3390/met11050844.

Full text

Abstract:

W/Cu joining is key for the fabrication of plasma-facing compounds of fusion reactors. In this work, W and Cu are joined through three steps: (1) hydrothermal treatment and reduction annealing (i.e., nano-treatment), (2) Cu plating and annealing in a pure H2 atmosphere, and (3) W/Cu bonding at 980 °C for 3 h. After nano-treatment, nanosheets structure can be found on the W substrate surface. The tensile strength of the W/Cu joint prepared via nano-treatment reaches as high as approximately 93 MPa, which increases by about 60% compared with the one without nano-treatment. The microhardness curves exhibited continuous variations along the W/Cu interface. The TEM images show that the W/Cu interface is compact without any cracks or voids. This work may also be applied for enhancing bonding strength in other immiscible materials.

APA, Harvard, Vancouver, ISO, and other styles

Journal articles on the topic 'Nano-interface'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles