Relevant bibliographies by topics / NAND SSD

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'NAND SSD'

Author: Grafiati
Published: 6 September 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'NAND SSD.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "NAND SSD"

1

Hong, Duwon, Keonsoo Ha, Minseok Ko, Myoungjun Chun, Yoona Kim, Sungjin Lee, and Jihong Kim. "Reparo: A Fast RAID Recovery Scheme for Ultra-large SSDs." ACM Transactions on Storage 17, no. 3 (August 31, 2021): 1–24. http://dx.doi.org/10.1145/3450977.

Full text
Abstract:
A recent ultra-large SSD (e.g., a 32-TB SSD) provides many benefits in building cost-efficient enterprise storage systems. Owing to its large capacity, however, when such SSDs fail in a RAID storage system, a long rebuild overhead is inevitable for RAID reconstruction that requires a huge amount of data copies among SSDs. Motivated by modern SSD failure characteristics, we propose a new recovery scheme, called reparo , for a RAID storage system with ultra-large SSDs. Unlike existing RAID recovery schemes, reparo repairs a failed SSD at the NAND die granularity without replacing it with a new SSD, thus avoiding most of the inter-SSD data copies during a RAID recovery step. When a NAND die of an SSD fails, reparo exploits a multi-core processor of the SSD controller in identifying failed LBAs from the failed NAND die and recovering data from the failed LBAs. Furthermore, reparo ensures no negative post-recovery impact on the performance and lifetime of the repaired SSD. Experimental results using 32-TB enterprise SSDs show that reparo can recover from a NAND die failure about 57 times faster than the existing rebuild method while little degradation on the SSD performance and lifetime is observed after recovery.
APA, Harvard, Vancouver, ISO, and other styles
2

Hung, Ji Jun, Kai Bu, Zhao Lin Sun, Jie Tao Diao, and Jian Bin Liu. "PCI Express-Based NVMe Solid State Disk." Applied Mechanics and Materials 464 (November 2013): 365–68. http://dx.doi.org/10.4028/www.scientific.net/amm.464.365.

Full text
Abstract:
This paper presents a new architecture SSD based on NVMe (Non-Volatile Memory express) protocol. The NVMe SSD promises to solve the conventional SATA and SAS interface bottleneck. Its aimed to present a PCIe NAND Flash memory card that uses NAND Flash memory chip as the storage media. The paper analyzes the PCIe protocol and the characteristics of SSD controller, and then gives the detailed design of the PCIe SSD. It mainly contains the PCIe port and Flash Translation Layer.
APA, Harvard, Vancouver, ISO, and other styles
3

Kim, Jiho, Myoungsoo Jung, and John Kim. "Decoupled SSD: Reducing Data Movement on NAND-Based Flash SSD." IEEE Computer Architecture Letters 20, no. 2 (July 1, 2021): 150–53. http://dx.doi.org/10.1109/lca.2021.3118688.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Gao, Congming, Min Ye, Chun Jason Xue, Youtao Zhang, Liang Shi, Jiwu Shu, and Jun Yang. "Reprogramming 3D TLC Flash Memory based Solid State Drives." ACM Transactions on Storage 18, no. 1 (February 28, 2022): 1–33. http://dx.doi.org/10.1145/3487064.

Full text
Abstract:
NAND flash memory-based SSDs have been widely adopted. The scaling of SSD has evolved from plannar (2D) to 3D stacking. For reliability and other reasons, the technology node in 3D NAND SSD is larger than in 2D, but data density can be increased via increasing bit-per-cell. In this work, we develop a novel reprogramming scheme for TLCs in 3D NAND SSD, such that a cell can be programmed and reprogrammed several times before it is erased. Such reprogramming can improve the endurance of a cell and the speed of programming, and increase the amount of bits written in a cell per program/erase cycle, i.e., effective capacity. Our work is the first to perform a real 3D NAND SSD test to validate the feasibility of the reprogram operation. From the collected data, we derive the restrictions of performing reprogramming due to reliability challenges. Furthermore, a reprogrammable SSD (ReSSD) is designed to structure reprogram operations. ReSSD is evaluated in a case study in RAID 5 system (RSS-RAID). Experimental results show that RSS-RAID can improve the endurance by 35.7%, boost write performance by 15.9%, and increase effective capacity by 7.71%, with negligible overhead compared with conventional 3D SSD-based RAID 5 system.
APA, Harvard, Vancouver, ISO, and other styles
5

Yang, Yuan Hua, Xian Bin Xu, Shui Bing He, Fang Zhen, and Yu Ping Zhang. "WLVT: A Static Wear-Leveling Algorithm with Variable Threshold." Advanced Materials Research 756-759 (September 2013): 3131–35. http://dx.doi.org/10.4028/www.scientific.net/amr.756-759.3131.

Full text
Abstract:
NAND flash memory has been successfully employed in storage system due to its advantages such as performance, resistance, and capacity. NAND flash memory based solid state disk (SSD) has started to replace disk in numerous environments. However, the poor endurance offered by these SSDs continues to be their key shortcoming. To improve SSD endurance, we propose a static wear-leveling algorithm with variable threshold (WLVT). In contrast with traditional algorithm with fixed threshold, WLVT adjusts the value of threshold, so that each block can simultaneously reach the erasure times that the manufacturer gives when life of SSD is over. Therefore, available erasure time of each block will be fully utilized when SSD fails. Experimental results show that the endurance of the SSD is significantly improved.
APA, Harvard, Vancouver, ISO, and other styles
6

Liu, Weihua, Fei Wu, Xiang Chen, Meng Zhang, Yu Wang, Xiangfeng Lu, and Changsheng Xie. "Characterization Summary of Performance, Reliability, and Threshold Voltage Distribution of 3D Charge-Trap NAND Flash Memory." ACM Transactions on Storage 18, no. 2 (May 31, 2022): 1–25. http://dx.doi.org/10.1145/3491230.

Full text
Abstract:
Solid-state drive (SSD) gradually dominates in the high-performance storage scenarios. Three-dimension (3D) NAND flash memory owning high-storage capacity is becoming a mainstream storage component of SSD. However, the interferences of the new 3D charge-trap (CT) NAND flash are getting unprecedentedly complicated, yielding to many problems regarding reliability and performance. Alleviating these problems needs to understand the characteristics of 3D CT NAND flash memory deeply. To facilitate such understanding, in this article, we delve into characterizing the performance, reliability, and threshold voltage ( V th ) distribution of 3D CT NAND flash memory. We make a summary of these characteristics with multiple interferences and variations and give several new insights and a characterization methodology. Especially, we characterize the skewed ( V th ) distribution, ( V th ) shift laws, and the exclusive layer variation in 3D NAND flash memory. The characterization is the backbone of designing more reliable and efficient flash-based storage solutions.
APA, Harvard, Vancouver, ISO, and other styles
7

Bu, Kai, Hai Jun Liu, Hui Xu, and Zhao Lin Sun. "Lifetime-Aware Capacity Dynamic Adjusting for Solid State Disk." Applied Mechanics and Materials 513-517 (February 2014): 3630–33. http://dx.doi.org/10.4028/www.scientific.net/amm.513-517.3630.

Full text
Abstract:
In this paper, we analyzed the endurance of Nand Flash memory and then proposed a level adjusting scheme to use the MLC Flash dynamically to storage different amount of data levels through the entire lifetime. The result shows that the MLC SSD adopting this method could be totally written 4.8X more data than conventional MLC SSD and 16.5% more than SLC SSD.
APA, Harvard, Vancouver, ISO, and other styles
8

Sassani (Sarrafpour), Bahman A., Mohammed Alkorbi, Noreen Jamil, M. Asif Naeem, and Farhaan Mirza. "Evaluating Encryption Algorithms for Sensitive Data Using Different Storage Devices." Scientific Programming 2020 (May 31, 2020): 1–9. http://dx.doi.org/10.1155/2020/6132312.

Full text
Abstract:
Sensitive data need to be protected from being stolen and read by unauthorized persons regardless of whether the data are stored in hard drives, flash memory, laptops, desktops, and other storage devices. In an enterprise environment where sensitive data is stored on storage devices, such as financial or military data, encryption is used in the storage device to ensure data confidentiality. Nowadays, the SSD-based NAND storage devices are favored over HDD and SSHD to store data because they offer increased performance and reduced access latency to the client. In this paper, the performance of different symmetric encryption algorithms is evaluated on HDD, SSHD, and SSD-based NAND MLC flash memory using two different storage encryption software. Based on the experiments we carried out, Advanced Encryption Standard (AES) algorithm on HDD outperforms Serpent and Twofish algorithms in terms of random read speed and write speed (both sequentially and randomly), whereas Twofish algorithm is slightly faster than AES in sequential reading on SSHD and SSD-based NAND MLC flash memory. By conducting full range of evaluative tests across HDD, SSHD, and SSD, our experimental results can give better idea for the storage consumers to determine which kind of storage device and encryption algorithm is suitable for their purposes. This will give them an opportunity to continuously achieve the best performance of the storage device and secure their sensitive data.
APA, Harvard, Vancouver, ISO, and other styles
9

No, Jaechun, Sung-Soon Park, and Cheol-Su Lim. "ReHypar: A Recursive Hybrid Chunk Partitioning Method Using NAND-Flash Memory SSD." Scientific World Journal 2014 (2014): 1–9. http://dx.doi.org/10.1155/2014/658161.

Full text
Abstract:
Due to the rapid development of flash memory, SSD is considered to be the replacement of HDD in the storage market. Although SSD retains several promising characteristics, such as high random I/O performance and nonvolatility, its high expense per capacity is the main obstacle in replacing HDD in all storage solutions. An alternative is to provide a hybrid structure where a small portion of SSD address space is combined with the much larger HDD address space. In such a structure, maximizing the space utilization of SSD in a cost-effective way is extremely important to generate high I/O performance. We developed ReHypar (recursive hybrid chunk partitioning) that enables improving the space utilization of SSD in the hybrid structure. The first objective of ReHypar is to mitigate the fragmentation overhead of SSD address space, by reusing the remaining free space of I/O units as much as possible. Furthermore, ReHypar allows defining several, logical data sections in SSD address space, with each of those sections being configured with the different I/O unit. We integrated ReHypar with ext2 and ext4 and evaluated it using two public benchmarks including IOzone and Postmark.
APA, Harvard, Vancouver, ISO, and other styles
10

Et.al, Ms Hepisuthar. "Comparative Analysis Study on SSD, HDD, and SSHD." Turkish Journal of Computer and Mathematics Education (TURCOMAT) 12, no. 3 (April 10, 2021): 3635–41. http://dx.doi.org/10.17762/turcomat.v12i3.1644.

Full text
Abstract:
In the Current Century, permeant storage devices and methods of storing data changed from traditional HDD to SDD. In this document, we discuss the merge of HDD and SSD. The Abbreviation of SSHD is called the solid-state hybrid disk. A mixture of both secondary devices to enhance the performance of the system. Inside the SSD, data movement events occur without any user input. Recent research has suggested that SSD has only the Replacement of secondary storage. HDD is also good in life span with longer life. It’s more reliable for long time data contained in this. HDD storage has typical magnetic fields for store data. SSD contains NAND flash memory to write the data in the drive. Based on the method and material of storing different. HDD and SSD feature well to upgrade with technology in Computer filed. For enhancing computing speed and excellent processing SSHD good to use in computer.Ratio increase of SSHD usage in current laptop and in computer system.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "NAND SSD"

1

Budd, Chris. "Buy versus Develop: A NAND Flash Controller Case Study." International Foundation for Telemetering, 2014. http://hdl.handle.net/10150/577401.

Full text
Abstract:
ITC/USA 2014 Conference Proceedings / The Fiftieth Annual International Telemetering Conference and Technical Exhibition / October 20-23, 2014 / Town and Country Resort & Convention Center, San Diego, CA
The decision to buy or develop any system component is a difficult one. Clearly, the development time and cost is less when using an off-the-shelf component; however, these components attempt to meet the requirements of a main-stream market segment. Outside of those markets, a designer may need to add unique features to solve problems for specialty markets; one example is SSDs for telemetry markets where one critical component is the NAND flash controller. This paper will focus on some of the requirement differences and why it is so important for SSD designers to develop their own controller for these markets.
APA, Harvard, Vancouver, ISO, and other styles
2

Budd, Chris. "Future of Flash." International Foundation for Telemetering, 2013. http://hdl.handle.net/10150/579690.

Full text
Abstract:
ITC/USA 2013 Conference Proceedings / The Forty-Ninth Annual International Telemetering Conference and Technical Exhibition / October 21-24, 2013 / Bally's Hotel & Convention Center, Las Vegas, NV
Solid-State Drives (SSDs) are an enabling technology for data recorders. SSDs can survive where Hard-Disk Drives (HDDs) cannot. SSDs deliver better performance with lower power consumption than HDDs. However, the end of Single-Level Cell (SLC) NAND flash may be near; Multi-Level Cell (MLC) NAND flash soon may be the only choice for industrial applications. System designers have two distinct concerns before implementing SSDs: 1. Cost: MLC NAND flash makes SSDs as affordable as HDDs 2. Endurance: SSDs are reliable and endurance assured with today's controller technology SSDs are leading the charge in transforming data storage in several applications, telemetry included.
APA, Harvard, Vancouver, ISO, and other styles
3

Geier, Florian. "The differences between SSD and HDD technology regarding forensic investigations." Thesis, Linnéuniversitetet, Institutionen för datavetenskap (DV), 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-44921.

Full text
Abstract:
In the past years solid state disks have developed drastically and are now gaining increased popularity compared to conventional hard drives. While hard disk drives work predictable, transparent SSD routines work in the background without the user’s knowledge. This work describes the changes to the everyday life for forensic specialists; a forensic investigation includes data recovery and the gathering of a digital image of each acquired memory that provides proof of integrity through a checksum. Due to the internal routines, which cannot be stopped, checksums are falsified. Therefore the images cannot prove integrity of evidence anymore. The report proves the inconsistence of checksums of SSD and shows the differences in data recovery through high recovery rates on hard disk drives while SSD drives scored no recovery or very poor rates.
APA, Harvard, Vancouver, ISO, and other styles
4

Lyrio, Tenorio Correia Carolina. "Le marquage des peptides avec des métaux et détection par MS et l'optimisation des procédures de l'extraction de métalloprotéin dans les échantillons biologiques à des fins de protéomique." Thesis, Pau, 2014. http://www.theses.fr/2014PAUU3008/document.

Full text
Abstract:
Ce travail a développé une nouvelle méthode pour l'identification et la quantification des peptides, par l'optimisation de certaines stratégies disponibles appropriées pour le marquage des peptides avec des métaux lanthanide, une séparation par nano-HPLC et détection UV, et suivi par MALDI MS. Tout d'abord, les peptides ont été marqués avec les trois métaux lanthanides différents et un réactif fonctionnel - DOTA. Les résultats montrent que la réaction de transformation en dérivé à l'aide du réactif chélateur DOTA-NHS-ester a été efficace pour des peptides individuels et des mélanges de peptides, vérifiées à partir de la relation m/z obtenue par MALDI MS. L'application optimisée d’un complexe (Cytochrome C digest) a montré des résultats comparables à ceux obtenus avec des peptides modèles. En parallèle, nous avons effectué l’optimisation pour la purification de métalloprotéine dans la bile de poisson, qui est signalée entant que biomarqueurs de contamination métallique de l'environnement. Des procédures différentes (différents moments de centrifugation et différentes températures de traitement thermique) et les agents (DTT, β-mercaptoéthanol et TCEP) réduisant ont été apliqués pour purifier les MT isolées de la bile et du foie des poissons (Oreochromis niloticus). Des analyses spectrophotométriques ont été utilisées pour quantifier les échantillons de MT, et le gel SDS-PAGE a été utilisé pour évaluer qualitativement les différents résultats de la procédure. Chaque procédure a en suíte été évaluée statistiquement, une méhtode des surfaces de réponse a été appliquée. Les MT de la bile semblent être plus adéquate pour la surveillance de l'environnement en ce qui concerne l'exposition récente à des xénobiotiques qui peuvent influer sur l'expression protéomique et metalloproteomique de cette matrice biologique. Une procédure d’exposition à des métaux dans le laboratoire a montré que les métaux étaient significativement importante pour l’évaluation de la contamination à partir de la quantification de MT, selon le traitement de données par une techinique de réseau neural
This work developed a new method for the identification and quantification of peptides, by optimizing some of the available strategies suitable for labeling peptides with lanthanide metals with subsequent separation by nano-HPLC with UV detection, matrix-assisted laser desorption ionization-mass spectrometry (MALDI MS). First, peptides were labeled with the three different lanthanide metals using a functional DOTA-based reagent. The results demonstrate that the derivatization reaction using the chelating reagent DOTA-NHS-ester was effective for single peptides and peptide mixtures, verified from the m/z relation obtained by MALDI MS. The application of the optimized method in a more complex matrix (Cytochrome C digest) showed results comparable to those obtained with model peptides. In parallel, environmental analyses were conducted, by performing the standardization of metalloprotein purification in fish bile, since this matrix has been reported as a biomarker for environmental metal contamination. Different procedures (varying centrifugation times and heat-treatment temperatures) and reducing agents (DTT, β-mercaptoethanol and TCEP) were applied to purify MT isolated from fish (Oreochromis niloticus) bile and liver. Spectrophotometrical analyses were used to quantify the resulting MT samples, and SDS-PAGE gels were used to qualitatively assess the different procedure results. Each procedure was then statistically evaluated. A response surface methodology was applied for bile samples, in order to further evaluate the responses for this matrix. In an environmental context, biliary MT was lower than liver MT, and, bile MT seems to be more adequate in environmental monitoring scopes regarding recent exposure to xenobiotics that may affect the proteomic and metalloproteomic expression of this biological matrix. A procedure for exposure to metals in the laboratory showed that some metals are significantly important for the assessment of contamination from the quantification of MT, according to the data processing by atifical neural network (ANN)
APA, Harvard, Vancouver, ISO, and other styles
5

Bartůněk, Petr. "Knihovna operací nad konečnými automaty." Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2010. http://www.nusl.cz/ntk/nusl-237128.

Full text
Abstract:
This work deals with two basic operations over finite automata. Determination of nondeterministic finite automata and minimization of deterministic finite automata. For these two operations I proposed sequential algorithms that are parallelizable. I deal mainly with finding the speedup of SSE instructions, or use the OpenMP library. The trend today is mainly in increasing the number of processors, so I propose parallel algorithms for multiple processors. When searching for the optimal solution, I will be to examine other ways to achieve speedup, for example efficient saving of the data structures in memory.
APA, Harvard, Vancouver, ISO, and other styles
6

Ingram, Ian David Victor. "New materials and processes for flexible nanoelectronics." Thesis, University of Manchester, 2013. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.588129.

Full text
Abstract:
Planar electronic devices represent an attractive approach towards roll-to-roll printed electronics without the need for the sequential, precisely aligned, patterning steps inherent in the fabrication of conventional ‘3D’ electronic devices. Self-switching diodes (SSDs) and in-plane-gate field-effect transistors (IPG-FETs) can be patterned using a single process into a substrate precoated with semiconductor.These devices function in depletion mode, requiring the semiconductor to be doped in order for the devices to function. To achieve this, a reliable and controllable method was developed for doping organic semiconducting polymers by the immersion of optimally deposited films in a solution of dopant. The process was shown to apply both semicrystalline and air-stable, amorphous materials indicating that the approach is broadly applicable to a wide range of organic semiconductors.Simultaneously with the development of the doping protocol specialised hot-embossing equipment was designed and constructed and a high-yielding method of patterning the structures of IPG-FETs and SSDs was arrived at. This method allowed for consistent and reliable patterning of features with a minimum line-width of 200nm.Following the development of these doping and patterning processes these were combined to fabricate controllably doped, functioning planar devices. SSDs showed true zero-threshold rectification behaviour with no observed breakdown in the reverse direction up to 100 V. IPG-FETs showed switching behaviour in response to an applied gate potential and were largely free of detectable gate leakage current, verifying the quality of the patterning process.Furthermore, high-performance semiconducting polymer PAAD was synthesised and characterised in field-effect transistors as steps towards its use in planar electronic devices. It was also shown that this material could be doped using the developed immersion doping protocol and that this protocol was compatible with top-gated device architectures and the use of fluoropolymer CYTOP as a dielectric.
APA, Harvard, Vancouver, ISO, and other styles
7

Chivrac, Frédéric Averous Luc. "Nano-biocomposites systèmes structurés à base d'amidon plastifié et d'argiles /." Strasbourg : Université de Strasbourg, 2009. http://eprints-scd-ulp.u-strasbg.fr:8080/1154/01/CHIVRAC_Frederic_2009.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Bordes, Perrine Averous Luc. "Nano-biocomposites études de systèmes structurés à base de polyhydroxyalcanoates et montmorillonites /." Strasbourg : Université Louis Pasteur, 2007. http://eprints-scd-ulp.u-strasbg.fr:8080/916/01/BORDES_Perrine2007.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Jegadeesan, Gautham. "Environmental catalysis using nano-sized bimetallic particles : selenium remediation /." Available to subscribers only, 2005. http://proquest.umi.com/pqdweb?did=1068236761&sid=29&Fmt=2&clientId=1509&RQT=309&VName=PQD.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Li, Lan. "Molecular dynamics simulations of the deformation of nano-structured materials." Diss., Restricted to subscribing institutions, 2007. http://proquest.umi.com/pqdweb?did=1324388961&sid=1&Fmt=2&clientId=1564&RQT=309&VName=PQD.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "NAND SSD"

1

Nana y el árbol que tenía sed. Fundación Musol, D.L, 2019.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

NANA Y EL ÁRBOL QUE TENÍA SED. Fundación Musol, D.L, 2019.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kim, Eunice, Allen Liu, and David Oglesby. Nana the Happy Face Spider's Happy, Sad, Happy Day! Independently Published, 2019.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "NAND SSD"

1

Takeuchi, K. "Low power 3D-integrated SSD." In Inside NAND Flash Memories, 515–36. Dordrecht: Springer Netherlands, 2010. http://dx.doi.org/10.1007/978-90-481-9431-5_18.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Takeuchi, K. "Flash Signal Processing and NAND/ReRAM SSD." In Inside Solid State Drives (SSDs), 357–74. Dordrecht: Springer Netherlands, 2012. http://dx.doi.org/10.1007/978-94-007-5146-0_13.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Crippa, Luca, and Rino Micheloni. "NAND Flash Design." In Inside Solid State Drives (SSDs), 135–80. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-0599-3_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Beug, M. F. "NAND Flash Technology." In Inside Solid State Drives (SSDs), 79–126. Dordrecht: Springer Netherlands, 2012. http://dx.doi.org/10.1007/978-94-007-5146-0_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Crippa, L., and R. Micheloni. "NAND Flash Design." In Inside Solid State Drives (SSDs), 127–71. Dordrecht: Springer Netherlands, 2012. http://dx.doi.org/10.1007/978-94-007-5146-0_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Micheloni, Rino, and Luca Crippa. "NAND Flash Memories." In Solid-State-Drives (SSDs) Modeling, 19–39. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-51735-3_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Beug, M. F. "2D NAND Flash Technology." In Inside Solid State Drives (SSDs), 61–104. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-0599-3_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Micheloni, Rino, Seiichi Aritome, and Luca Crippa. "3D NAND Flash Memories." In Inside Solid State Drives (SSDs), 105–33. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-0599-3_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Chang, Yuan-Hao, and Li-Pin Chang. "Efficient Wear Leveling in NAND Flash Memory." In Inside Solid State Drives (SSDs), 343–67. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-0599-3_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Takeuchi, K. "NAND and Controller Co-design for SSDs." In Inside Solid State Drives (SSDs), 173–201. Dordrecht: Springer Netherlands, 2012. http://dx.doi.org/10.1007/978-94-007-5146-0_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "NAND SSD"

1

No, Jaechun. "Hybrid File System Using NAND-Flash SSD." In 2011 International Conference on Cyber-Enabled Distributed Computing and Knowledge Discovery (CyberC). IEEE, 2011. http://dx.doi.org/10.1109/cyberc.2011.67.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Wilson, Ellis H., Myoungsoo Jung, and Mahmut T. Kandemir. "ZombieNAND: Resurrecting Dead NAND Flash for Improved SSD Longevity." In 2014 IEEE 22nd International Symposium on Modelling, Analysis & Simulation of Computer and Telecommunication Systems (MASCOTS. IEEE, 2014. http://dx.doi.org/10.1109/mascots.2014.37.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Liu, Chun-Yi, Yunju Lee, Myoungsoo Jung, Mahmut Taylan Kandemir, and Wonil Choi. "Prolonging 3D NAND SSD lifetime via read latency relaxation." In ASPLOS '21: 26th ACM International Conference on Architectural Support for Programming Languages and Operating Systems. New York, NY, USA: ACM, 2021. http://dx.doi.org/10.1145/3445814.3446733.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Karakulak, Seyhan, Anthony D. Weathers, and Richard D. Barndt. "Read Level Profiling Algorithms for NAND Based SSD Flash." In GLOBECOM 2016 - 2016 IEEE Global Communications Conference. IEEE, 2016. http://dx.doi.org/10.1109/glocom.2016.7842199.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Sun, Chao, Kousuke Miyaji, Koh Johguchi, and Ken Takeuchi. "SCM capacity and NAND over-provisioning requirements for SCM/NAND flash hybrid enterprise SSD." In 2013 5th IEEE International Memory Workshop (IMW). IEEE, 2013. http://dx.doi.org/10.1109/imw.2013.6582099.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Li, Peng, Kai Liu, Wei Dang, and Tianji Zou. "Reliability assessment of NAND SSD based on acceleration degradation test." In 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM). IEEE, 2017. http://dx.doi.org/10.1109/ieem.2017.8290231.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Kim, Hyeunjee, Hoonha Choi, Youngwoo Kim, and Jaechun No. "MS2: NAND-Flash SSD-Based Multi-Layered Storage Management System." In 2016 International Conference on Cyber-Enabled Distributed Computing and Knowledge Discovery (CyberC). IEEE, 2016. http://dx.doi.org/10.1109/cyberc.2016.28.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Cinar, Yusuf, Junghoon Kim, Eunho Oh, Sungki Lee, Changsik Kwon, and Jonggyu Park. "Analysis of SSD Acoustic Noise Generation Mechanism depending on NAND operation." In 2023 IEEE International Reliability Physics Symposium (IRPS). IEEE, 2023. http://dx.doi.org/10.1109/irps48203.2023.10118247.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

No, Jaechun, and Sung-soon Park. "Exploiting the Effect of NAND Flash-Memory SSD on Filesystem Design." In 2012 International Conference on Cyber-Enabled Distributed Computing and Knowledge Discovery (CyberC). IEEE, 2012. http://dx.doi.org/10.1109/cyberc.2012.93.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Alhasan, Hasan, Yun-Chih Chen, Chien-Chung Ho, and Tei-Wei Kuo. "RUSM: Harnessing Unused Resources in 3D NAND SSD to Enhance Reading Performance." In 2022 IEEE 11th Non-Volatile Memory Systems and Applications Symposium (NVMSA). IEEE, 2022. http://dx.doi.org/10.1109/nvmsa56066.2022.00020.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "NAND SSD"

1

Vuksanović, Vuk, and Srđan Hercigonja. Između emocija i realizma: Dva lica turske spoljne politike na Balkanu. Belgrade Centre for Security Policy, June 2013. http://dx.doi.org/10.55042/dvvy2324.

Full text
Abstract:
U poređenju sa komentarima o delovanju Rusije i Kine, prodornijem odnosu Turske prema Balkanu se ne poklanja dovoljno pažnje. Kako bi se ova praznina popunila, istraživački tim Beogradskog centra za bezbednosnu politiku (BCBP) sproveo je istraživanje zasnovano na analizi sekundarnog izvornog materijala ali, što je još važnije, i na razgovorima koji su sa šesnaest istraživača i pripadnika akademiske zajednice obavljeni u Istanbulu i Ankari. Iako konsultovani izvori imaju različite biografije i političke simpatije, istraživanjem je utvrđeno da su im određene teme svima zajedničke. Turska spoljna politika na Balkanu, naime, ima dva aspekta. Prvi je zasnovan na emocijama, i tu je spoljna politika države definisana njenim posebnim vezama sa tom oblašću, odnosno zajedničkom istorijom, društvenim vezama, faktorima identiteta i nasleđem Otomanskog carstva. S obzirom na društveno-kulturne veze i činjenicu da je Bosna i Hercegovina država u kojoj je to nasleđe najprisutnije, ona se u kontekstu posebnih veza sa Turskom pominje najčešće. Drugi pristup je ukorenjen u tradicionalnom spoljnopolitičkom realizmu koji proizlazi iz objektivne i proračunate procene regionalnog odnosa snaga i sopstvenih interesa. U okviru tog pristupa, Turska iz bezbednosnih i strateških razloga nastoji da deluje pragmatično i ostvaruje svoje namere na Balkanu, a da se pritom ne uplete u krize koje bi mogle da joj ometaju uticaj u regionu. Ovaj pristup Tursku vodi ka aktivnim odnosima sa Srbijom, koja je u strateškom smislu značajna zemlja u regionu, jer je Ankara duboko uverena da, ukoliko želi da bude delotvorna na Balkanu, mora da ima partnerski odnos sa Beogradom. Pri tome, mora da uspostavi ravnotežu između emocija i realizma. Mora pažljivo da neguje odnose sa zajednicama sa kojima ima kulturne i verske veze, kao što su Bošnjačke i Albanske, ali i da istovremeno pazi da od sebe ne odgurne države poput Srbije, čije joj je partnerstvo neophodno ukoliko želi da postigne uspeh na Balkanu. Turska spoljna politika u regionu prošla je kroz dve faze. U prvoj joj je politika prema Balkanu bila previše fokusirana na istoriju i faktore identiteta. Ta praksa je posebno došla do izražaja u fazi koju kritičari vole da nazivaju „neoosmanizmom“, a koja se najčešće povezuje sa Ahmetom Davutogluom, nekadašnjim ministrom inostranih poslova Turske (2009-2014) i kasnije premijerom (2014–2016). Treba naglasiti da je Redžep Tajip Ergodan i tada bio na vlasti, ali je za politiku prema Balkanu bio zadužen prvenstveno Davutoglu. Međutim, upravo zbog retorike kojom se akcenat stavljao na emocije, istoriju i kulturu, spoljna politika Ankare u regionu je tokom tog perioda doživljavala neuspehe jer su lokalni hrišćanski narodi Tursku doživljavali kao ekspanzionističku silu koja se poziva na ranije imperijalno nasleđe, i kao pristrasnog posrednika koji favorizuje muslimanske zajednice kakva je npr. bošnjačka. Realistički impulsi turske spoljne politike su na površinu izbili u drugoj fazi. Ona je započela odlaskom Ahmeta Davutoglua, kada je predsednik Redžep Tajip Erdogan preuzeo čvršću kontrolu nad spoljnom politikom zemlje, pa i prema Balkanu. Ankara od tada stavlja veći naglasak na realizam i pragmatizam, za razliku od ranijeg insistiranja na strastvenoj, istorijskoj retorici. Ovu transformaciju simbolizuju bliže veze sa Srbijom koje balkanskoj politici Ankare daju veću slobodu. Pre nego što se pojavila vest o Erdoganovoj pobedi, tokom predsedničkih i parlamentarnih izbora koji su u Turskoj održani u maju 2023. godine vodila se žestoka debata o budućem smeru spoljne politike zemlje. Dok su neki tvrdili da ona mora da ostane nepromenjena bez obzira na ishod izbora , drugi su verovali u potencijalne promene u sveukupnom odnosu zemlje sa akterima kao što su EU, SAD i Rusija . Međutim, ni pre ni nakon izbora nije bilo naznaka da će se spoljna politika Turske prema Balkanu bitno promeniti. Naprotiv, može da se očekuje da će upornost međunarodnih i domaćih faktora koji su u igri dovesti do dosledne balkanske politike Turske, te da će tamošnje spoljnopolitičke elite, kada se angažuju na Balkanu, i dalje biti prinuđene da balansiraju između emocija i realizma.
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'NAND SSD' for particular source types:
Journal articles Dissertations / Theses
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography