Journal articles: 'Moving plate'

1

Asadi, Hamed, Mohammad M. Aghdam, and Mahmoud Shakeri. "Vibration analysis of axially moving line supported functionally graded plates with temperature-dependent properties." Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 228, no. 6 (July 26, 2013): 953–69. http://dx.doi.org/10.1177/0954406213498033.

Full text

Abstract:

Vibration analysis of axially moving functionally graded plates with internal line supports and temperature-dependent properties is investigated using harmonic differential quadrature method. The plate is subjected to static in-plane forces while out-of-plane loading is dynamic. Stability of an axially moving plate, traveling at a constant velocity between different supports and experiencing small transverse vibrations are considered. The series of internal rigid line supports parallel to the plate edges are considered together with various arbitrary combinations of boundary conditions. Material properties of the plate are assumed temperature-dependent which is a non-linear function of temperature and differ continuously through thickness according to a power-law distribution of the volume fractions of the plate constituents. Two types of micromechanical models, namely, the Voigt and Mori–Tanaka models are considered. Based on the classical plate theory, the governing equations are obtained for functionally graded plate using the Hamilton’s principle. In the frame of a general dynamic analysis, it is shown that the onset of instability takes place in the form of divergence. The plate may experience divergence or flutter instability at a super critical velocity. Results for dynamic analysis of isotropic and laminated plates are validated with available data in the existing literature, which show excellent agreement. Furthermore, some new results are presented for vibration analysis of functionally graded material plates to study effects of the location of line supports, material properties, volume fraction, temperature, loading, aspect ratio and speed.

APA, Harvard, Vancouver, ISO, and other styles

2

Ziegler, Peter A. "Plate tectonics, plate moving mechanisms and rifting." Tectonophysics 215, no. 1-2 (December 1992): 9–34. http://dx.doi.org/10.1016/0040-1951(92)90072-e.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Magyari, E. "The moving plate thermometer." International Journal of Thermal Sciences 47, no. 11 (November 2008): 1436–41. http://dx.doi.org/10.1016/j.ijthermalsci.2007.12.010.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Poojitha, K., V. Pooja, K. Sunitha, and Dr Shruti Bhargava Choubey. "Moving Vehicle Registration Plate Detection." International Journal for Research in Applied Science and Engineering Technology 11, no. 1 (January 31, 2023): 1789–92. http://dx.doi.org/10.22214/ijraset.2023.48784.

Full text

Abstract:

Abstract: Generally, video surveillance system is used for security purpose as well as monitoring but recognition of moving object is a difficult part of video surveillance. Now a days, due to decreasing costs of high quality video surveillance systems, detection and tracking has becomeincreasingly in practical with the help of human activities. Nowadays, these kind of systems have been designed for various tasks, but the task of detecting illegally parked vehicles has been left largely to the human operators of these systems. The recognition of Registration platesof Indian vehicles is the most interesting and challenging part from past few years. It is noticedthat the registration plates of vehicles are in different shapes and sizes and colours in various countries. We need to identify the registration plate of moving vehicles using python librariessuch as OpenCV and Pytesseract. This project will enable us to identify the numbers and characters of a registration plate easily. The major technology which we use here is Edge detection technique.

APA, Harvard, Vancouver, ISO, and other styles

5

Vaidya, Prof Rajeshri, Vaishnavi Bisen, Manjusha Bansod, Ganesh Masurkar, Lokesh Telange, and Piyush Shelke. "Moving Vehicle Registration Plate Detection." International Journal for Research in Applied Science and Engineering Technology 11, no. 4 (April 30, 2023): 544–47. http://dx.doi.org/10.22214/ijraset.2023.50121.

Full text

Abstract:

Abstract: License plate detection and E-challan system is an automated solution for traffic law enforcement that utilizes cameras, image processing algorithms, and software to detect license plates of vehicles and issue electronic challans for traffic rule violations. The system involves the installation of cameras at strategic locations on roads and highways, which capture images of passing vehicles. The E-challan system is an efficient and accurate system that reduces the workload of traffic police and enablesquick identification and penalization of traffic violators. E-Challan System is the online platform aimed at providing a wide rangeof support in managing and monitoring the traffic penalties, helping users regarding the problems they face in paying for their challan. The E-challan System is basically an interaction between Police and drivers easily through an online platform or an app. This project prototype describes how challan becomes easy for users through keeping it online. The online platform aims to reducethe paperwork, manual process and increase the convenience for the users

APA, Harvard, Vancouver, ISO, and other styles

6

Gorla, Rama Subba Reddy, K. Ramalingam, and I. Adluri. "Magnetohydrodynamic Braking." Journal of Tribology 117, no. 4 (October 1, 1995): 724–28. http://dx.doi.org/10.1115/1.2831543.

Full text

Abstract:

A viscous and electrically conductive fluid separates two parallel plates. A magnetic field of intensity B0 is applied perpendicular to the plates. The top plate squeezes downward whereas the bottom plate moves laterally in its own plane. The nonsimilar problem is solved for the conditions of the top plate moving with constant velocity or constant force, while the bottom plate moves with a constant velocity. The effect of magnetic field on the braking action is discussed.

APA, Harvard, Vancouver, ISO, and other styles

7

Luong, Van Hai, Tan Ngoc Than Cao, J. N. Reddy, Kok Keng Ang, Minh Thi Tran, and Jian Dai. "Static and Dynamic Analyses of Mindlin Plates Resting on Viscoelastic Foundation by Using Moving Element Method." International Journal of Structural Stability and Dynamics 18, no. 11 (October 22, 2018): 1850131. http://dx.doi.org/10.1142/s0219455418501316.

Full text

Abstract:

Presented herein is a novel computational approach using the moving element method (MEM) for simulating the dynamic response of Mindlin plate resting on a viscoelastic foundation and subjected to moving loads. The governing equations and the element mass, damping and stiffness matrices are formulated in a convected coordinate system in which the origin is attached to the point of the moving applied load. Thus, the method simply treats moving loads as ‘stationary’ at the nodes of the plate to avoid updating the locations of moving loads due to the change of the contact points on the plate. To verify the accuracy of the proposed computational approach, static and free vibration analyses of plates are investigated first. Next, the dynamic response of plate resting on a viscoelastic foundation subjected to a moving load is examined. A parametric study is performed to determine the effects of the load’s velocity, foundation damping and foundation stiffness on the dynamic response of a plate. Finally, the comparisons of the dynamic response of plates resting on viscoelastic foundation and subjected to moving vehicles with three models of load (single-wheel, single-axle and tandem-axle) are discussed.

APA, Harvard, Vancouver, ISO, and other styles

8

Luong, Van Hai, Tan Ngoc Than Cao, Qui X. Lieu, and Xuan Vu Nguyen. "Moving Element Method for Dynamic Analyses of Functionally Graded Plates Resting on Pasternak Foundation Subjected to Moving Harmonic Load." International Journal of Structural Stability and Dynamics 20, no. 01 (October 25, 2019): 2050003. http://dx.doi.org/10.1142/s0219455420500030.

Full text

Abstract:

This paper presents the moving element method (MEM) for dynamic analyses of functionally graded (FG) plates resting on Pasternak foundation under moving harmonic load. The Mindlin plate theory is used to model the FG plates. Macroscopic material properties of FG plates are assumed to continuously vary across the thickness direction by a simple power-law distribution. The governing equation of the FG plate is formulated in a coordinate system which moves along with the applied load. In addition, the method simply treats the moving load as “stationary” at the discretized node of plate to completely eliminate the update procedure of force vector due to the change of contact point with elements. To verify the accuracy of the computational paradigm, static and free vibration analyses of FG plates are examined first. Dynamic analyses of FG plates subjected to a moving harmonic load are then conducted to investigate the effects of various parameters such as volume fraction exponent, Young’ modulus, load velocity, foundation damping coefficient and load acceleration/deceleration on dynamic responses of the plate.

APA, Harvard, Vancouver, ISO, and other styles

9

Zhang, Man, and Ji-Xian Dong. "Transverse Vibration Analysis of Axially Moving Trapezoidal Plates." Journal of Nanoelectronics and Optoelectronics 16, no. 6 (June 1, 2021): 978–86. http://dx.doi.org/10.1166/jno.2021.3049.

Full text

Abstract:

Transverse vibration of axially moving trapezoidal plates is investigated. The differential equation of transverse vibration for a axially moving trapezoidal plate is established by D'Alembert principle. The original trapezoid region can be replaced by regular square region by the medium parameter method for the convenience of calculation. A generalized complex eigenvalue equation is derived by a discrete method (the differential quadrature method). The complex frequency curve of trapezoidal plate is obtained by calculating the eigenvalue equation. The change of the complex frequencies of the axially moving trapezoidal plates with the dimensionless axially moving speed is analyzed. The effects of the aspect ratio and the trapezoidal angle on instability type of the trapezoidal plate are discussed under different boundary conditions. The results of numerical analysis show that there are two main instability types of axially moving trapezoidal plate: divergence and flutter. The modal orders of the two types of instability are also different, which is related to the trapezoidal angle, aspect ratio and boundary condition of the trapezoidal plate.

APA, Harvard, Vancouver, ISO, and other styles

10

Wang, Yan, and Zhong Min Wang. "Stability Analyses of a Moving Rectangular Plate by the Element Free Galerkin Method." Advanced Materials Research 594-597 (November 2012): 2651–54. http://dx.doi.org/10.4028/www.scientific.net/amr.594-597.2651.

Full text

Abstract:

The element-free Galerkin method is proposed to solve the stability of the moving rectangular plates. Utilizing the extended Hamilton’s principle for the elastic dynamics system, the variational expression of the moving thin plate are established. The dimensionless equations of motion of the moving thin plate are obtained by the element-free Galerkin method, and the complex eigenvalue equation is presented. Via numerical calculation, the variation relationship between the first three complex frequencies of the system and the moving speed is obtained. The effects of dimensionless moving speed on the stability and critical load of the thin plates are analyzed.

APA, Harvard, Vancouver, ISO, and other styles

11

SHAWKY, A., A. HAMDY, H. KESHK, and M. EL_ADAWY. "LICENSE PLATE RECOGNITION OF MOVING VEHICLE." JES. Journal of Engineering Sciences 37, no. 6 (November 1, 2009): 1489–98. http://dx.doi.org/10.21608/jesaun.2009.128533.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

WILSON, M. "Plate-moving mechanisms: constraints and controversies." Journal of the Geological Society 150, no. 5 (September 1993): 923–26. http://dx.doi.org/10.1144/gsjgs.150.5.0923.

Full text

APA, Harvard, Vancouver, ISO, and other styles

13

ZIEGLER, P. A. "Plate-moving mechanisms: their relative importance." Journal of the Geological Society 150, no. 5 (September 1993): 927–40. http://dx.doi.org/10.1144/gsjgs.150.5.0927.

Full text

APA, Harvard, Vancouver, ISO, and other styles

14

V, Ch Ramana Murthy. "MHD Flow Past an Infinite Inclined Moving Plate With Radiation Effects." Journal of Advanced Research in Dynamical and Control Systems 12, no. 3 (March 20, 2020): 560–70. http://dx.doi.org/10.5373/jardcs/v12i3/20201224.

Full text

APA, Harvard, Vancouver, ISO, and other styles

15

Awodola, T. O., and B. Omolofe. "Response to Concentrated Moving Masses of Elastically Supported Rectangular Plates Resting on Winkler Elastic Foundation." Journal of Theoretical and Applied Mechanics 44, no. 3 (September 1, 2014): 65–90. http://dx.doi.org/10.2478/jtam-2014-0017.

Full text

Abstract:

Abstract The dynamic response to moving concentrated masses of elastically supported rectangular plates resting on Winkler elastic foundation is investigated in this work. This problem, involving non-classical boundary conditions, is solved and illustrated with two common examples often encountered in engineering practice. Analysis of the closed form solutions shows that, for the same natural frequency (i) the response amplitude for the moving mass problem is greater than that one of the moving force problem for fixed Rotatory inertia correction factor R0 and foundation modulus F0, (ii) The critical speed for the moving mass problem is smaller than that for the moving force problem and so resonance is reached earlier in the former. The numerical results in plotted curves show that, for the elastically supported plate, as the value of R0 increases, the response amplitudes of the plate decrease and that, for fixed value of R0, the displacements of the plate decrease as F0 increases. The results also show that for fixed R0 and F0, the transverse deflections of the plates under the actions of moving masses are higher than those when only the force effects of the moving load are considered. Hence, the moving force solution is not a save approximation to the moving mass problem. Also, as the mass ratio Γ approaches zero, the response amplitude of the moving mass problem approaches that one of the moving force problem of the elastically supported rectangular plate resting on constant Winkler elastic foundation.

APA, Harvard, Vancouver, ISO, and other styles

16

Wijaya, Marvin Chandra. "Research of Indonesian license plates recognition on moving vehicles." EUREKA: Physics and Engineering, no. 6 (November 29, 2022): 185–98. http://dx.doi.org/10.21303/2461-4262.2022.002424.

Full text

Abstract:

The recognition of the characters in the license plate has been widely studied, but research to recognize the character of the license plate on a moving car is still rarely studied. License plate recognition on a moving car has several difficulties, for example capturing still images on moving images with non-blurred results. In addition, there are also several problems such as environmental disturbances (low lighting levels and heavy rain). In this study, a novel framework for recognizing license plate numbers is proposed that can overcome these problems. The proposed method in this study: detects moving vehicles, judges the existence of moving vehicles, captures moving vehicle images, deblurring images, locates license plates, extracts vertical edges, removes unnecessary edge lines, segments license plate locations, Indonesian license plate cutting character segmenting, character recognition. Experiments were carried out under several conditions: suitable conditions, poor lighting conditions (dawn, evening, and night), and unfavourable weather conditions (heavy rain, moderate rain, and light rain). In the experiment to test the success of the license plate number recognition, it was seen that the proposed method succeeded in recognizing 98.1 % of the total images tested. In unfavorable conditions such as poor lighting or when there are many disturbances such as rain, there is a decrease in the success rate of license plate recognition. Still, the proposed method's experimental results were higher than the method without deblurring by 1.7 %. There is still unsuccessful in recognizing license plates from the whole experiment due to a lot of noise. The noise can occur due to unfavourable environmental conditions such as heavy rain.

APA, Harvard, Vancouver, ISO, and other styles

17

Andreozzi, Assunta. "Numerical study of mixed convection in a horizontal no parallel-plates channel with an unheated moving plate." International Journal of Numerical Methods for Heat & Fluid Flow 28, no. 3 (March 5, 2018): 547–70. http://dx.doi.org/10.1108/hff-09-2016-0340.

Full text

Abstract:

Purpose The purpose of this paper is to analyze the thermal and fluid dynamic behaviors of mixed convection in air because of the interaction between a buoyancy flow and a moving plate induced flow in a horizontal no parallel-plates channel to investigate the effects of the minimum channel spacing, wall heat flux, moving plate velocity and converging angle. Design/methodology/approach The horizontal channel is made up of an upper inclined plate heated at uniform wall heat flux and a lower adiabatic moving surface (belt). The belt moves from the minimum channel spacing section to the maximum channel spacing section at a constant velocity so that its effect interferes with the buoyancy effect. The numerical analysis is accomplished by means of the finite volume method, using the commercial code Fluent. Findings Results in terms of heated upper plate and moving lower plate temperatures and stream function fields are presented. The paper underlines the thermal and fluid dynamic differences when natural convection or mixed convection takes place, varying minimum channel spacing, wall heat flux, moving plate velocity and converging angle. Research limitations/implications The hypotheses on which the present analysis is based are two-dimensional, laminar and steady state flow and constant thermo physical properties with the Boussinesq approximation. The minimum distance between the upper heated plate of the channel and its lower adiabatic moving plate is 10 and 20 mm. The moving plate velocity varies in the range 0-1 m/s; the belt moves from the right reservoir to the left one. Three values of the uniform wall heat flux are considered, 30, 60 and 120 W/m2, whereas the inclination angle of the upper plate θ is 2° and 10°. Practical implications Mixed convection because of moving surfaces in channels is present in many industrial applications; examples of processes include continuous casting, extrusion of plastics and other polymeric materials, bonding, annealing and tempering, cooling and/or drying of paper and textiles, chemical catalytic reactors, nuclear waste repositories, petroleum reservoirs, composite materials manufacturing and many others. The investigated configuration is used in applications such as re-heating of billets in furnaces for hot rolling process, continuous extrusion of materials and chemical vapor deposition, and it could also be used in thermal control of electronic systems. Originality/value This paper evaluates the thermal and velocity fields to detect the maximum temperature location and the presence of fluid recirculation. The paper is useful to thermal designers.

APA, Harvard, Vancouver, ISO, and other styles

18

Tseng, Hung Li, Chao Nan Hung, Sun Yen Tan, Chiu Ching Tuan, Chi Ping Lee, and Wen Tzeng Huang. "Single Camera for Multiple Vehicles License Plate Localization and Recognition on Multilane Highway." Applied Mechanics and Materials 418 (September 2013): 120–23. http://dx.doi.org/10.4028/www.scientific.net/amm.418.120.

Full text

Abstract:

License plate recognition systems can be classified into several categories: systems with single camera for motionless vehicle, systems with single camera for moving vehicle, and systems with multiple cameras for moving vehicles on highways (one camera for each lane). In this paper we present an innovative system which can locate multiple moving vehicles and recognize their license plates with only one single camera. Obviously, our system is highly cost effective in comparison with other systems. Our system has license plate localization success rate 94% and license plate recognition success rate 88%. These success rates are pretty satisfiable considering the system is working on fast moving vehicles on highway.

APA, Harvard, Vancouver, ISO, and other styles

19

Weisensel, G. N., and A. L. Schlack. "Response of Annular Plates to Circumferentially and Radially Moving Loads." Journal of Applied Mechanics 60, no. 3 (September 1, 1993): 649–61. http://dx.doi.org/10.1115/1.2900854.

Full text

Abstract:

The forced dynamic response of annular plates to circumferentially and radially moving concentrated transverse loads is investigated utilizing classical plate theory, with damping included, and solved in integral form. The boundary conditions are that the inner boundary of the plate is clamped and the outer boundary is free. An analytical expression in Fourier-Bessel series form is obtained for the forced deflection response to an arbitrarily moving concentrated load. This study includes radially moving loads and is a significant extension of the understanding of circular and annular plate dynamics. This understanding of radially moving loads is used to examine the nature of resonance conditions and corresponding critical values of the load parameters. The shapes of deflection modes of plate vibration are also presented. Damping and loading parameter sensitivities are studied in detail.

APA, Harvard, Vancouver, ISO, and other styles

20

Zeng, Y., and S. Weinbaum. "Stokes problems for moving half-planes." Journal of Fluid Mechanics 287 (March 25, 1995): 59–74. http://dx.doi.org/10.1017/s0022112095000851.

Full text

Abstract:

New exact solutions of the Navier–Stokes equations are obtained for the unbounded and bounded oscillatory and impulsive tangential edgewise motion of touching half-infinite plates in their own plane. In contrast to Stokes classical solutions for the harmonic and impulsive motion of an infinite plane wall, where the solutions are separable or have a simple similarity form, the present solutions have a two-dimensional structure in the near region of the contact between the half-infinite plates. Nevertheless, it is possible to obtain relatively simple closed-form solutions for the flow field in each case by defining new variables which greatly simplify the r- and θ-dependence of the solutions in the vicinity of the contact region. These solutions for flow in a half-infinite space are then extended to bounded flows in a channel using an image superposition technique. The impulsive motion has application to the motion near geophysical faults, whereas the oscillatory motion has arisen in the design of a novel oscillating half-plate flow chamber for examining the effect of fluid shear stress on cultured cell monolayers.

APA, Harvard, Vancouver, ISO, and other styles

21

Khang, Nguyen Van, and Nguyen Minh Phuong. "Transverse vibration of orthotropic rectangular plates under moving bodies." Vietnam Journal of Mechanics 31, no. 1 (March 18, 2009): 47–56. http://dx.doi.org/10.15625/0866-7136/31/1/5493.

Full text

Abstract:

The use of orthotropic plates is common in all the fields of structural engineering: civil, traffic, aerospace and naval. In this paper the transverse vibration of orthotropic rectangular plates under moving bodies is investigated. The method of substructures is used to derive transverse vibration equations of an orthotropic rectangular plate under the action of moving bodies. For the calculation of dynamic response of orthotropic rectangular plate we use Ritz method and numerical integration method.

APA, Harvard, Vancouver, ISO, and other styles

22

Wang, Yan Qing, Sen Wen Xue, Xiao Bo Huang, and Wei Du. "Vibrations of Axially Moving Vertical Rectangular Plates in Contact with Fluid." International Journal of Structural Stability and Dynamics 16, no. 02 (February 25, 2016): 1450092. http://dx.doi.org/10.1142/s0219455414500928.

Full text

Abstract:

The vibration characteristics of an axially moving vertical plate immersed in fluid and subjected to a pretension are investigated, with a special consideration to natural frequencies, complex mode functions and critical speeds of the system. The classical thin plate theory is adopted for the formulation of the governing equation of motion of the vibrating plates. The effects of free surface waves, compressibility and viscidity of the fluid are neglected in the analysis. The velocity potential and Bernoulli’s equation are used to describe the fluid pressure acting on the moving plate. The effect of fluid on the vibrations of the plate may be regarded as equivalent to an added mass on the plate. The formulation of added mass is obtained from kinematic boundary conditions of the plate–fluid interfaces. The effects of some system parameters such as the moving speed, stiffness ratios, location and aspect ratios of the plate and the fluid-plate density ratios on the above-mentioned vibration characteristics of the plate–fluid system are investigated in detail. Various different boundary conditions are considered in the study.

APA, Harvard, Vancouver, ISO, and other styles

23

Kumaran, V., and G. Ramanaiah. "Effect of Crossflow on Oscillatory Flow in a Porous Medium Between Two Parallel Plates in Relative Motion." Journal of Fluids Engineering 113, no. 1 (March 1, 1991): 151–54. http://dx.doi.org/10.1115/1.2926490.

Full text

Abstract:

This paper deals with the incompressible flow through a porous medium bounded by two parallel permeable plates, one of which is stationary and the other slides and oscillates in its own plane. Also uniform crossflow is superimposed through the plates. Analytical solutions for flow parameters are obtained. The effect of crossflow, permeability, and the frequency of the moving plate on the velocity, skin friction has been investigated. It is shown that skin friction can be reduced considerably by injection at the lower plate.

APA, Harvard, Vancouver, ISO, and other styles

24

Van, Vu Tan, Nguyen Huynh Tan Tai, and Nguyen Ngoc Hung. "Static bending and free vibration analysis of functionally graded porous plates laid on elastic foundation using the meshless method." Journal of Science and Technology in Civil Engineering (STCE) - NUCE 15, no. 2 (April 27, 2021): 141–59. http://dx.doi.org/10.31814/stce.nuce2021-15(2)-12.

Full text

Abstract:

This paper presents a numerical approach for static bending and free vibration analysis of the functionally graded porous plates (FGPP) resting on the elastic foundation using the refined quasi-3D sinusoidal shear deformation theory (RQSSDT) combined with the Moving Kriging–interpolation meshfree method. The plate theory considers both shear deformation and thickness-stretching effects by the sinusoidal distribution of the in-plane displacements, satisfies the stress-free boundary conditions on the top and bottom surfaces of the plate without shear correction coefficient. The advantage of the plate theory is that the displacement field of plate is approximated by only four variables leading to reduce computational efforts. Comparison studies are performed for the square FGPP with simply supported all edges to verify the accuracy of the present approach. The effect of the aspect ratio, volume fraction exponent, and elastic foundation parameters on the static deflections and natural frequency of FGPP are also investigated and discussed. Keywords: meshless method; Moving Kriging interpolation; refined quasi-3D theory; porous functionally\break graded plate; Pasternak foundation.

APA, Harvard, Vancouver, ISO, and other styles

25

Kozerski, Hans-Peter, and Klaus Leuschner. "Plate sediment traps for slowly moving waters." Water Research 33, no. 13 (September 1999): 2913–22. http://dx.doi.org/10.1016/s0043-1354(98)00510-7.

Full text

APA, Harvard, Vancouver, ISO, and other styles

26

Zhou, Yin-Feng, and Zhong-Min Wang. "Dynamic instability of axially moving viscoelastic plate." European Journal of Mechanics - A/Solids 73 (January 2019): 1–10. http://dx.doi.org/10.1016/j.euromechsol.2018.06.009.

Full text

APA, Harvard, Vancouver, ISO, and other styles

27

Yadav, H. S., and P. V. Kamat. "Effect of Moving Plate on Jet-Penetration." Propellants, Explosives, Pyrotechnics 14, no. 1 (February 1989): 12–18. http://dx.doi.org/10.1002/prep.19890140104.

Full text

APA, Harvard, Vancouver, ISO, and other styles

28

Barata, Bruno, Jorge Navalho, and Jose Pereira. "RANS simulations of plane impinging jets: On the influence of plate velocity in the Nusselt number secondary peak." Thermal Science, no. 00 (2023): 127. http://dx.doi.org/10.2298/tsci230206127b.

Full text

Abstract:

In the present work, heat transfer characteristics of a turbulent confined slot jet impinging on a heated moving plate are studied by means of time-averaged Navier-Stokes simulations. Three different plate conditions are considered: zero plate velocity (stationary plate); plate moving with a constant velocity; and plate moving with a constant acceleration. The jet nozzle-to-plate ratio and the jet inlet Reynolds number are equal to 4 and 2 ? 104, respectively. The objective of the present research is to investigate the role of the plate velocity condition on the development of the second peak in the Nusselt number profile along the impingement plate. The k-kl-? transition RANS model was validated against DNS and experimental data and was able to correctly predict both the size and location of the Nusselt number secondary peak. A third recirculation zone appears as the plate velocity increases and the Nusselt number secondary peaks location shifts slightly downstream. The development of the third recirculation zone induces an accentuated decrease in the local and average Nusselt numbers. Furthermore, the plate acceleration delays the movement of the transition in the wall jets and the appearance of the third recirculation zone. Consequently, the average Nusselt number increases with time, and the heat transfer from the plate is enhanced up to 8%.

APA, Harvard, Vancouver, ISO, and other styles

29

Wang, Bao Lin, and Jie Cai Han. "A Nonhomogeneous Piezoelectric Material Plate with a Moving Crack." Key Engineering Materials 324-325 (November 2006): 85–88. http://dx.doi.org/10.4028/www.scientific.net/kem.324-325.85.

Full text

Abstract:

This paper investigates a moving crack in a nonhomogeneous piezoelectric material (NPM) plate. The mechanical and electrical properties of the plate are considered for a class of functional forms for which closed-form expressions for the moving crack tip electromechanical fields are obtained. Effect of material non-homogeneity and crack moving velocity on the crack tip fields are discussed. The crack moving velocity can increase or decrease the stress intensity factor. The cleavage stress, τθz, however, is always an increasing function of crack moving velocity.

APA, Harvard, Vancouver, ISO, and other styles

30

Tran, Thanh Trung, Quoc Hoa Pham, Trung Nguyen-Thoi, and The-Van Tran. "Dynamic Analysis of Sandwich Auxetic Honeycomb Plates Subjected to Moving Oscillator Load on Elastic Foundation." Advances in Materials Science and Engineering 2020 (May 12, 2020): 1–16. http://dx.doi.org/10.1155/2020/6309130.

Full text

Abstract:

Based on Mindlin plate theory and finite element method (FEM), dynamic response analysis of sandwich composite plates with auxetic honeycomb core resting on the elastic foundation (EF) under moving oscillator load is investigated in this work. Moving oscillator load includes spring-elastic k and damper c. The EF with two coefficients was modelled by Winkler and Pasternak. The system of equations of motion of the sandwich composite plate can be solved by Newmark’s direct integration method. The reliability of the present method is verified through comparison with the results other methods available in the literature. In addition, the effects of structural parameters, material properties, and moving oscillator loads to the dynamic response of the auxetic honeycomb plate are studied.

APA, Harvard, Vancouver, ISO, and other styles

31

HATAMI, S., M. AZHARI, and M. M. SAADATPOUR. "NONLINEAR ANALYSIS OF AXIALLY MOVING PLATES USING FEM." International Journal of Structural Stability and Dynamics 07, no. 04 (December 2007): 589–607. http://dx.doi.org/10.1142/s0219455407002447.

Full text

Abstract:

In the present study, a nonlinear finite element formulation is developed for analysis of axially moving two-dimensional materials, based on the classical thin plate theory. Using Green's strain definition, the membrane stresses variation due to transverse displacements is considered. Hamilton's principle is employed to obtain the secant stiffness matrix, the in-plane and out-of-plane gyroscopic matrices and the dynamic stability matrix due to centripetal acceleration for a traveling thin plate. In order to extract the numerical results, a p-version finite element is adopted by selecting only an quadrilateral super element with Lagrangian interpolation functions. With a few test cases, the reliability of the formulation and the solution procedure is shown.

APA, Harvard, Vancouver, ISO, and other styles

32

Šimonová, Karina, and Petr Honzík. "Modeling of MEMS Transducers with Perforated Moving Electrodes." Micromachines 14, no. 5 (April 24, 2023): 921. http://dx.doi.org/10.3390/mi14050921.

Full text

Abstract:

Microfabricated electroacoustic transducers with perforated moving plates used as microphones or acoustic sources have appeared in the literature in recent years. However, optimization of the parameters of such transducers for use in the audio frequency range requires high-precision theoretical modeling. The main objective of the paper is to provide such an analytical model of a miniature transducer with a moving electrode in the form of a perforated plate (rigid elastically supported or elastic clamped at all boundaries) loaded by an air gap surrounded by a small cavity. The formulation for the acoustic pressure field inside the air gap enables expression of the coupling of this field to the displacement field of the moving plate and to the incident acoustic pressure through the holes in the plate. The damping effects of the thermal and viscous boundary layers originating inside the air gap, the cavity, and the holes in the moving plate are also taken into account. The analytical results, namely, the acoustic pressure sensitivity of the transducer used as a microphone, are presented and compared to the numerical (FEM) results.

APA, Harvard, Vancouver, ISO, and other styles

33

Guo, Xu Xia. "Thermoelastic Coupling Vibration of the Moving Rectangular Plate." Applied Mechanics and Materials 319 (May 2013): 435–39. http://dx.doi.org/10.4028/www.scientific.net/amm.319.435.

Full text

Abstract:

The dynamic characteristics and stability of the thermoelastic coupling moving rectangular plate are investigated. Based on the heat conduction equation involving the thermoelastic coupling term and the differential equation of motion of the plate subjected to the thermal shock, the thermoelastic coupling differential equation of the moving plate is derived. Dimensionless complex frequencies of the thermoelastic coupling moving rectangular plate with two opposite edges simply supported and other two edges clamped are calculated by the differential quadrature method. The results show that the first mode behaves divergent instability firstly, and the critical divergent moving speed of the first mode increase with the increase of the thermoelastic coupling factor for the two kinds of boundary conditions.

APA, Harvard, Vancouver, ISO, and other styles

34

Sun, Lu. "Dynamics of Plate Generated by Moving Harmonic Loads." Journal of Applied Mechanics 72, no. 5 (May 20, 2005): 772–77. http://dx.doi.org/10.1115/1.1993669.

Full text

Abstract:

A thin plate resting on a Winkler elastic foundation subject to a moving harmonic load can be used as the model for highway and airport pavement under moving vehicle load and many other applications. The study of dynamic response of the plate thus becomes very important. In this paper we study the dynamic displacement of a plate caused by a moving harmonic line and point load. The solution is represented by the convolution of dynamic Green’s function of plate. An approximate relationship between critical load velocity and critical frequency is established analytically. It is found that the maximum displacement response occurs at the center of the moving load and travels at the same speed with the load.

APA, Harvard, Vancouver, ISO, and other styles

35

Kim, Taehyun, and Usik Lee. "Vibration Analysis of Thin Plate Structures Subjected to a Moving Force Using Frequency-Domain Spectral Element Method." Shock and Vibration 2018 (September 24, 2018): 1–27. http://dx.doi.org/10.1155/2018/1908508.

Full text

Abstract:

A frequency-domain spectral element method (SEM) is proposed for the vibration analysis of thin plate structures subjected to a moving point force. The thin plate structures may consist of multiple rectangular thin plates with arbitrary boundary conditions that form multispan thin plate structures, such as bridges. The time-domain point force moving on a thin rectangular plate with arbitrary trajectory is transformed into a series of stationary point forces in the frequency domain. The vibration responses induced by the moving point force are then obtained by superposing all vibration responses excited by each stationary point force. For the vibration response of a specific stationary point force, the plate subjected to the specific stationary point force is represented by four spectral finite plate elements, which were developed in the authors’ previous work. The SEM-based vibration analysis technique is first presented for single-span thin plate structures and then extended to the multispan thin plate structures. The high accuracy and computational efficiency of the proposed SEM-based vibration analysis technique are verified by comparison with other well-known solution methods, such as the exact theory, integral transform method, finite element method, and the commercial finite element analysis package ANSYS.

APA, Harvard, Vancouver, ISO, and other styles

36

Chang, Boyan, Jifu Zhang, Dong Liang, and Yang Zhou. "Analysis of rotation capacity of a novel 2R1T mechanism based on origami of thick panels." Journal of Physics: Conference Series 2125, no. 1 (November 1, 2021): 012044. http://dx.doi.org/10.1088/1742-6596/2125/1/012044.

Full text

Abstract:

Abstract A foldable and symmetrical lower-mobility parallel mechanism was proposed based on Waterbomb origami of thick panels. It consists of a moving platform, a base plate and three deployable foldable legs between moving platform and base plate. Firstly, constraint wrenches of each leg were formulated based on screw theory and the results illustrated that the moving platform is in possession of two degrees of orientation freedom and one translational degree of freedom. Secondly, it was approved that base and moving platform are always symmetrical about a middle plane and the moving platform can rotate continuously about any axis chosen freely on this plane. Solving models including forward and inverse position problems were established to determine the maximum rotational angle and workspace. Finally, performance indexe of maximum rotational angle of the PM was analyzed, and effects of two structural variables to the performance were summarized. Conclusions obtained can provide a theoretical basis for the structural design and engineering application of this 2T1R parallel mechanism.

APA, Harvard, Vancouver, ISO, and other styles

37

Miao, Ruan, Zhong Min Wang, and Jing Hu Feng. "Transverse Vibration Characteristics of Simply Supported Moving FGM Rectangular Plate." Advanced Materials Research 243-249 (May 2011): 5374–80. http://dx.doi.org/10.4028/www.scientific.net/amr.243-249.5374.

Full text

Abstract:

The present paper investigates the dynamic characteristics and stability of moving functionally graded material rectangular thin plate. Based on Voigt model, the material properties are assumed to vary continuously through their thickness according to a power-law distribution of the volume fractions of the plate constituents. By the first order shear deformation theory, the differential equations of motion of the moving FGM rectangular plate are derived. The vibration frequencies are obtained from the solution of a generalized eigenvalue problem. Entire computational work is carried out in a normalized square domain obtained through an appropriate domain mapping technique. Results of the reduced problem revealed excellent agreement with other studies. The dimensionless complex frequencies of the moving FGM rectangular plate with four edges simply supported are calculated by the differential quadrature method. The effects of gradient index, aspect ratio, and dimensionless moving speed on the transverse vibration and stability of the moving FGM rectangular plate are analyzed. Results are furnished in dimensionless amplitude–frequency vs. dimensionless moving speed in the form of curves and pictorial representations of some vibration mode shapes are made.

APA, Harvard, Vancouver, ISO, and other styles

38

Zhang, Wei, and Ling Yu. "Bidirectional Moving Force Identification on an Orthotropic Rectangular Plate." Advanced Materials Research 378-379 (October 2011): 171–75. http://dx.doi.org/10.4028/www.scientific.net/amr.378-379.171.

Full text

Abstract:

Based on the modal superposition and dynamic programming theory, a method is proposed to identify bidirectional moving forces from orthotropic plate bridge responses in time domain. The bridge deck is modeled as an orthotropic plate and the moving vehicle loads are modeled as two groups of axle loads moving cross the bridge deck in two opposite directions. The equation of motion is formulated in state space and the resulting damped least-square identification problem is solved using the dynamic programming method with regularization on the solution. Some numerical simulations show that the proposed method is effective, accurate and suitable for the bidirectional moving vehicle load identification. Some parameter effects of measurement noise and of eccentricity of moving loads on the identification accuracy are discussed as well.

APA, Harvard, Vancouver, ISO, and other styles

39

SETH, G. S., J. K. SINGH, and G. K. MAHATO. "EFFECTS OF HALL CURRENT AND ROTATION ON UNSTEADY HYDROMAGNETIC COUETTE FLOW WITHIN A POROUS CHANNEL." International Journal of Applied Mechanics 04, no. 02 (June 2012): 1250015. http://dx.doi.org/10.1142/s1758825112500159.

Full text

Abstract:

Unsteady hydromagnetic Couette flow of a viscous, incompressible and electrically conducting fluid between two parallel porous plates taking Hall current into account in a rotating system is studied. Fluid flow within the channel is induced due to impulsive movement of the lower plate of the channel and is permeated by a uniform transverse magnetic field which is fixed relative to the moving plate. Solution of the governing equations is obtained by Laplace transform technique. The expression for the shear stress at the moving plate due to primary and secondary flows is also derived. Asymptotic behavior of the solution valid for small and large values of time t is analyzed to gain some physical insight into the flow pattern. Numerical values of primary and secondary velocities and that of shear stress at the moving plate due to primary and secondary flows are displayed graphically for various values of Hall current parameter m, rotation parameter K2, magnetic parameter M2, suction/injection parameter S and time t.

APA, Harvard, Vancouver, ISO, and other styles

40

Yang, Sheng Fei, Hao Chen, and Chun Ran. "Dynamic Stability Analysis of Functionally Graded Plates Subjected to Complex Loads." Applied Mechanics and Materials 578-579 (July 2014): 679–86. http://dx.doi.org/10.4028/www.scientific.net/amm.578-579.679.

Full text

Abstract:

The paper investigates the dynamic stability of thick functionally graded plates subjected to aero-thermo-mechanical loads, using the moving least squares differential quadrature method. Temperature field is assumed to be a uniform distribution over the plate plane, and varied in the thickness direction only. Material properties are assumed to be temperature dependent and graded in the thickness direction in the simple power law manner. The equilibrium equations governing the dynamic stability of the plate are derived by the Hamilton’s principle, then these equations are discretized by the moving least squares differential quadrature method. The boundaries of the instability region are obtained using the principle of Bolotin’s method and are conveniently represented in the non-dimensional excitation frequency to load amplitude plane. The influence of various factors such as gradient index, temperature, mechanical and aerodynamic loads, thickness and aspect ratios, as well as the boundary conditions on the dynamic instability region are carefully studied.

APA, Harvard, Vancouver, ISO, and other styles

41

Li, Qi, Xing Li, and Qi Wu. "Resonance Analysis of Cantilever Plates Subjected to Moving Forces by a Semi-Analytical Method." International Journal of Structural Stability and Dynamics 20, no. 04 (April 2020): 2050049. http://dx.doi.org/10.1142/s0219455420500492.

Full text

Abstract:

Cantilever plate structures are widely used in civil and aerospace engineering. Here, a semi-analytical method is proposed to calculate the dynamic responses of cantilever plates subjected to moving forces. The Rayleigh–Ritz method is used to obtain the semi-analytical modal frequencies and shapes of a thin, isotropic, and rectangular cantilever plate using the assumed mode shapes that fulfill the boundary conditions of the plate. The modal superposition method is used to decouple the motion equations of the cantilever plate to obtain a series of modal equations. Then, the generalized forces are transformed into a Fourier series in terms of discrete harmonic forces. The dynamic responses of the cantilever plate are obtained by superimposing the analytical responses of a number of single-degree-of-freedom modal systems under discrete harmonic forces. The proposed semi-analytical method is verified through comparison with the numerical method. Then, the vibration of the cantilever plate under the action of moving forces is investigated based on the semi-analytical results. It is found that the contribution of the high-order modes to the dynamic responses of the plate cannot be ignored. In addition, the wavelengths of the mode shapes not only affect the magnitude of the modal forces but also the dominant frequency of the modal forces. Resonant responses of the plate are produced by the moving forces when the load interval equals the wavelength of the mode shape of a high-order mode and the exciting frequency of the moving forces equals the natural frequency of this mode.

APA, Harvard, Vancouver, ISO, and other styles

42

Cao, Tan Ngoc Than, Van Hai Luong, Hoang Nhi Vo, Xuan Vu Nguyen, Van Nhut Bui, Minh Thi Tran, and Kok Keng Ang. "A Moving Element Method for the Dynamic Analysis of Composite Plate Resting on a Pasternak Foundation Subjected to a Moving Load." International Journal of Computational Methods 16, no. 08 (August 29, 2019): 1850124. http://dx.doi.org/10.1142/s0219876218501244.

Full text

Abstract:

The paper proposes a computational approach to simulate the dynamic responses of composite plate resting on a Pasternak foundation subjected a moving load using the moving element method (MEM). The plate element stiffness matrix is formulated in a coordinate system which moves with the load. The main convenience is that the load is static in this coordinate system, which avoids the updating of the load locations due to the change of the contact points with the elements. The effects of the Pasternak foundation, energy dissipation mechanisms, load’s velocity, material properties on the dynamic responses of the composite plates are investigated.

APA, Harvard, Vancouver, ISO, and other styles

43

Wang, Yan, Tao Jing, Jimei Wu, and Min Xie. "Stability of Axially Moving Piezolaminated Viscoelastic Plate Subjected to Follower Force." Advances in Materials Science and Engineering 2015 (2015): 1–12. http://dx.doi.org/10.1155/2015/758472.

Full text

Abstract:

The stability of the moving viscoelastic plate with the piezoelectric layer subjected to uniformly distributed tangential follower force is investigated. The force excited by the piezoelectric layer due to external voltage is modeled as the follower tensile force. The differential equation of the axially moving viscoelastic rectangular plate with piezoelectric layer subjected to uniformly distributed tangential follower force is formulated on the basis of the Kirchhoff thin plate theory and the two-dimensional viscoelastic differential constitutive relation. The complex eigenvalue equations are established by the differential quadrature method. Via numerical calculation, the curves of real parts and imaginary parts of dimensionless complex frequencies versus uniformly distributed tangential follower force and dimensionless moving speed are obtained. The effects of nonconservative force, dimensionless axially moving speed, and dimensionless applied voltages on the stability of axially moving nonconservative viscoelastic plate with piezoelectric layer are analyzed.

APA, Harvard, Vancouver, ISO, and other styles

44

Zhu, X. Q., and S. S. Law. "Identification of Moving Loads on an Orthotropic Plate." Journal of Vibration and Acoustics 123, no. 2 (October 1, 2000): 238–44. http://dx.doi.org/10.1115/1.1349889.

Full text

Abstract:

A method is presented to identify indirectly loads moving on an orthotropic plate. The loads are in a group of two forces or four forces. The dynamic behavior of the plate under the action of these moving loads is analyzed. A method to identify these moving forces from the dynamic responses of the plate is developed basing on the modal superposition principle, and Tikhonov regularization procedure is applied to provide bounds to the solution in the time domain. Prior knowledge on the modal properties of the plate and the velocity of loads is required. The errors in the identified individual loads are discussed. The effect of different combinations of measuring locations on the identification is studied. Numerical results show that acceleration responses would give better and acceptable results than strain measurements.

APA, Harvard, Vancouver, ISO, and other styles

45

SAGARTZAZU, X., and L. HERVELLA-NIETO. "IMPEDANCE PREDICTION FOR SEVERAL POROUS LAYERS ON A MOVING PLATE: APPLICATION TO A PLATE COUPLED TO AN AIR CAVITY." Journal of Computational Acoustics 19, no. 04 (December 2011): 379–94. http://dx.doi.org/10.1142/s0218396x11004468.

Full text

Abstract:

This paper presents the problem of modeling poroelastic material on a moving structure. It presents the ambiguity of using estimated or measured surface impedance on a rigid structure as opposed to transfer impedance, which takes into account the movement of the structure to which a porous material is fixed. Biot's model for prediction of surface impedance is presented, and the transfer impedance is defined on the basis of this model. A case where several layers of porous material are fixed to a moving wall is also studied. Finally, it presents the level of agreement with experimental measurements in a coupled fluid–structure problem when an impedance considering a fixed structure and an impedance considering a moving structure are used.

APA, Harvard, Vancouver, ISO, and other styles

46

Can, Ahmet. "Drying of painted glass plate on moving tape." Thermal Science 23, no. 6 Part B (2019): 3951–63. http://dx.doi.org/10.2298/tsci180327288c.

Full text

Abstract:

While moving on the tape, the surface temperature of the painted glass plate entering the drying oven reaches a required certain temperature after a certain distance. The drying air as reverse flow through the product is directed transversely across the other end of the drying oven and towards the inlet. The convective mass transfer between the surface and the free flow depends on the conditions within the boundary-layer. The relationship between convection mass transfer and concentration boundary-layer are explained with valid equations for mol flux related to diffusion mass transfer. In the study, drying oven and air conditioning cabin has been used to determine the drying properties of two types of tempered glass paint of 1T1405-IR702 and 1T1430-IR702. In the drying process on conveyor tape, the drying oven length has been determined between 5.30 m and 23.3 m for values of conveyor tape velocity of 0.05 m/s, drying temperatures between 50?C and 70?C and forced air velocity of 2.5 m/s. At the end of the study, the theoretical and experimental results have also been evaluated.

APA, Harvard, Vancouver, ISO, and other styles

47

Gaifullin, A. M., and A. B. Zubtsov. "Flow past a plate with a moving surface." Fluid Dynamics 44, no. 4 (August 2009): 540–44. http://dx.doi.org/10.1134/s0015462809040073.

Full text

APA, Harvard, Vancouver, ISO, and other styles

48

Davis, B. R., D. Abbott, and J. M. R. Parrondo. "Thermodynamic energy exchange in a moving plate capacitor." Chaos: An Interdisciplinary Journal of Nonlinear Science 11, no. 3 (September 2001): 747–54. http://dx.doi.org/10.1063/1.1394191.

Full text

APA, Harvard, Vancouver, ISO, and other styles

49

Kim, Seong-Min, and Jose M. Roesset. "Moving Loads on a Plate on Elastic Foundation." Journal of Engineering Mechanics 124, no. 9 (September 1998): 1010–17. http://dx.doi.org/10.1061/(asce)0733-9399(1998)124:9(1010).

Full text

APA, Harvard, Vancouver, ISO, and other styles

50

Saigal, S., O. P. Agrawal, and M. M. Stanišič. "Influence of moving masses on rectangular plate dynamics." Ingenieur-Archiv 57, no. 3 (June 1987): 187–96. http://dx.doi.org/10.1007/bf02570606.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Journal articles on the topic 'Moving plate'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles