Academic literature on the topic 'Molding (forming)'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Molding (forming).'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "Molding (forming)"
Czerwinski, Frank. "Selected Aspects of Semisolid Forming Magnesium Alloys." Materials Science Forum 539-543 (March 2007): 1644–49. http://dx.doi.org/10.4028/www.scientific.net/msf.539-543.1644.
Full textWu, Li Ying. "Study on Form Process of Resin Composite Material and Graphic Artist Designer." Applied Mechanics and Materials 608-609 (October 2014): 41–45. http://dx.doi.org/10.4028/www.scientific.net/amm.608-609.41.
Full textYu, Bei, and He Qing Wang. "Research on Injection Products Molding Defects Warping Based on Moldflow." Applied Mechanics and Materials 365-366 (August 2013): 141–44. http://dx.doi.org/10.4028/www.scientific.net/amm.365-366.141.
Full textJing, Guan. "Analysis of Influence of Fine Aggregate on Void Ratio of Asphalt Mixture." Applied Mechanics and Materials 587-589 (July 2014): 1079–83. http://dx.doi.org/10.4028/www.scientific.net/amm.587-589.1079.
Full textYang, Jie, Yang Guan, Dongdong Gu, Yuzhong Zhang, Zheng Zhang, and Jinfa Shi. "Effect of a stranded hole type on the performance of corn stover composite pipe." PLOS ONE 19, no. 4 (April 10, 2024): e0301590. http://dx.doi.org/10.1371/journal.pone.0301590.
Full textChaisrichawla, Suradej, and Rapeephun Dangtungee. "The Usage of Recycled Material in Rotational Molding Process for Production of Septic Tank." Materials Science Forum 936 (October 2018): 151–58. http://dx.doi.org/10.4028/www.scientific.net/msf.936.151.
Full textChen, Yuan-Yang, and Yung-Jin Weng. "A Novel Continuous Roll-Forming Process of Elastomer Molds." Processes 11, no. 3 (March 18, 2023): 931. http://dx.doi.org/10.3390/pr11030931.
Full textLi, Zhen, Li Xia Xu, Chun Lan Lu, Guo Zhu Liu, and Xin Yue Li. "Internal Structure Changes of Nylon 12 in Balloon Forming Process." Applied Mechanics and Materials 528 (February 2014): 153–61. http://dx.doi.org/10.4028/www.scientific.net/amm.528.153.
Full textHu, Hai Ming, De Bao Yin, and Hui Li. "Forming Process of Segment-Narrow-Bars on the PCR Mold." Key Engineering Materials 561 (July 2013): 270–73. http://dx.doi.org/10.4028/www.scientific.net/kem.561.270.
Full textYanjun, Xiao, Liu Rui, Song Haiping, Jing Ran, and Zhu Jiayu. "The Characteristics of Perlite Sound Absorption Board Formed By Vibration Molding." Open Materials Science Journal 9, no. 1 (June 26, 2015): 39–42. http://dx.doi.org/10.2174/1874088x01509010039.
Full textDissertations / Theses on the topic "Molding (forming)"
Reddy, Mahender Palvai. "Finite element simulation of three-dimensional casting, extrusion and forming processes." Diss., This resource online, 1990. http://scholar.lib.vt.edu/theses/available/etd-07282008-135311/.
Full textSu, Lijuan. "EXPERIMENTAL AND NUMERICAL ANALYSIS OF THERMAL FORMING PROCESSES FOR PRECISION OPTICS." The Ohio State University, 2010. http://rave.ohiolink.edu/etdc/view?acc_num=osu1288024081.
Full textYoung, Robert Thomas. "Processing Behavior of Thermoplastics Reinforced with Melt Processable Glasses." Diss., Virginia Tech, 1999. http://hdl.handle.net/10919/37490.
Full textPh. D.
Chen, Yang. "Thermal Forming Process for Precision Freeform Optical Mirrors and Micro Glass Optics." The Ohio State University, 2010. http://rave.ohiolink.edu/etdc/view?acc_num=osu1267477993.
Full textSmith, Andrew G. "The Development of a Vacuum Forming System for KYDEX® and Other Thermoplastic Sheet." Digital Commons @ East Tennessee State University, 2017. https://dc.etsu.edu/etd/3233.
Full textCordier, Telmar Aurélie. "Etude de déformabilité de tresses en cours de préformage pour la fabrication de composite par le procédé RTM." Thesis, Orléans, 2012. http://www.theses.fr/2012ORLE2045/document.
Full textThis study deals with the manufacture of composite parts by the process "Resin Transert Molding" (RTM), applied to thermal protection tubes. This work aims to demonstrate the feasibility of using this method for the production of these complex parts. This study deals with the first step of the RTM process, the fiber performing. This is critical from the standpoint of the feasibility of injecting step that follows in the RTM process but also to ensure the quality of the final composite part obtained. The aim of the thesis is threefold. Must first develop the manufacturing protocol adapted to ensure repeatable obtaining preforms compliant. This protocol should be viable to the industrial point of view. For this purpose, an experimental approach was implemented. A pilot laboratory and an industrial pilot helped to understand and master the phenomena occurring during forming varying the process parameters for the production of many prototypes. A macroscopic model predictive of overall shape folds obtained from the process parameters has been developed with the experimental observations. A mesoscopic model, the scale of the unit cell was also writing. It can predict, based on the specifications of the material and part geometry, the deformation of compaction and shear stresses. These models mesoscopic and macroscopic allow the development of a global tool that, theoretically predictive and ensures the feasibility of a piece of known geometry with a known material parameters and provides the "process" to ensure its optimum manufacturing future. The phenomena of compaction and shear strain appearing on the braid during preforming are identified and known. The manufacturing process is optimized and the predictive tool allows to explore and test upstream change of material, part geometry in manufacturing or industrial specifications
Wendling-Hivet, Audrey. "Simulation à l'échelle mésoscopique de la mise en forme de renforts de composites tissés." Thesis, Lyon, INSA, 2013. http://www.theses.fr/2013ISAL0079.
Full textNowadays, manufacturers, especially in transport, are increasingly interested in integrating composite parts into their products. These materials have, indeed, many benefits, among which allowing parts mass reduction when properly operated. In order to manufacture these parts, several methods can be used, including the RTM (Resin Transfer Molding) process which consists in forming a dry reinforcement (preform) before a resin being injected. This study deals with the first stage of the RTM process, which is the preforming step. It aims to implement an efficient strategy leading to the finite element simulation of fibrous reinforcements at mesoscopic scale. At this scale, the fibrous reinforcement is modeled by an interlacement of yarns assumed to be homogeneous and continuous. Several steps are then necessary and therefore considered here to achieve this goal. The first consists in creating a 3D geometrical model of unit cells as realistic as possible. It is achieved through the implementation of an iterative strategy based on two main properties. On the one hand, consistency, which ensures a good description of the contact between the yarns, that is to say, the model does not contain spurious spaces or interpenetrations at the contact area. On the other hand, the variation of the yarn section shape along its trajectory that enables to stick as much as possible to the evolutive shape of the yarn inside the reinforcement. Using this tool and a woven architecture freely implementable by the user, a model representative of any type of reinforcement (2D, interlock) can be obtained. The second step consists in creating a 3D consistent hexahedral mesh of these unit cells. Based on the geometrical model obtained in the first step, the meshing tool enables to mesh any type of yarn, whatever its trajectory or section shape. The third step consists in establishing a constitutive equation of the homogeneous material equivalent to a fibrous material from the mechanical behavior of the constituent material of fibers and the structure of the yarn. Based on recent experimental and numerical developments in the mechanical behavior of fibrous structures, a new constitutive law is presented and implemented. Finally, a study of the different parameters involved in the dynamic/explicit scheme is performed. These last two points allow both to a quick convergence of the calculations and approach the reality of the deformation of reinforcements. The entire chain modeling/simulation of fibrous reinforcements at mesoscopic scale created is validated by numerical and experimental comparison tests of reinforcements under simple loadings
Wendling, Audrey. "Simulation à l'échelle mésoscopique de la mise en forme de renforts de composites tissés." Phd thesis, INSA de Lyon, 2013. http://tel.archives-ouvertes.fr/tel-00961196.
Full textSanjon, Cedric, Fabian Kayatz, and Andre Schult. "Materialcharakterisierung von Kunststoffen fürs Thermoformen unter Nutzung neuer Messtechnologien." Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2018. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-236138.
Full textLI, KUI-YU, and 李奎昱. "The Study of Forming Quality of the Counter Pressure Mechanism on Liquid-assisted Injection Molding." Thesis, 2014. http://ndltd.ncl.edu.tw/handle/q6rnxz.
Full text中原大學
機械工程研究所
102
Liquid-Assisted Injection Molding(LAIM) is short shot filling plastic melt. When center layer plastic melt under melting state add liquid let finished presented hollow. The purpose is Use hollow forming and liquid feature can reached save materials and upgrade finished quality. In LAIM, The assisted liquid penetration capability is impact process main factor. Liquid penetration capability than gas higher and Incompressibility capability easy produce finished center layer orderless. Impact liquid penetration capability parameters is liquid pressure and temperature. Control Pressure need mobile directions install pressure sensors, and use liquid assisted machine variable adjustment changes, and observation pressure changes for finished impact. Control temperature need near mold side install temperature sensors, and mobile directions outside pack insulation foam reduce heat diffuse. In this study, use visualization mold and paperclip shape mold insert. Record Gas Counter Pressure(GCP) under finished plastic melt flow state and liquid penetration capability and epidermal layer thickness changes by the visualization window and the plastic join particle. GCP LAIM and GCP GAIM make than penetration capability and thickness changes. Use changes liquid viscosity , the study of viscosity for liquid penetration capability impact. Get on GCP applications in LAIM mold flow analysis and real mobile state prove. Complete LAIM combined GCP database. The results of Experiments analysis, join GCP can subjoin liquid penetration stability, although reduce finished hollow area, but can upgrade finished penetration length cause overall penetration average. In GCP LAIM and GCP GAIM compare section. LAIM because liquid incompressibility and thermal fast, so it need forming pressure hold time short in penetration average and stable also than GAIM. Improve injection liquid viscosity can change heat conduction and viscous force, further change finished penetration length and hollow area.
Books on the topic "Molding (forming)"
Reyne, Maurice. Plastic forming processes. Hoboken, NJ: John Wiley, 2008.
Find full textHuang, Yong. Novel Colloidal Forming of Ceramics. Berlin, Heidelberg: Springer-Verlag Berlin Heidelberg, 2011.
Find full textIgami, Hideo. Purasuchikku shīto fōmingu: Atarashii gijutsu chōryū to sōzōteki sekkei shuhō = Plastic sheet forming : a new technical trend and creative design methods. Tōkyō-to Chiyoda-ku: Kurieito Nippō Shuppanbu, 2012.
Find full textUnited States. Environmental Protection Agency. Office of Water Regulations and Standards. Industrial Technology Division. Development document for effluent limitations guidelines and standards for the plastics molding and forming point source category. Washington, D.C: U.S. Environmental Protection Agency, Office of Water, Office of Water Regulations and Standards, Industrial Technology Division, 1985.
Find full textRongkuan, Shen, ed. Mo zao cheng xing gong yi ming ci ci dian: English Chinese dictionary of metal forming. Taibei Shi Dazhi: Ming shan chu ban she, 1985.
Find full textReyne, Maurice. Plastic Forming Processes. Wiley & Sons, Incorporated, John, 2010.
Find full textReyne, Maurice. Plastic Forming Processes. Wiley & Sons, Incorporated, John, 2013.
Find full textReyne, Maurice. Plastic Forming Processes. Wiley & Sons, Incorporated, John, 2013.
Find full textReyne, Maurice. Plastic Forming Processes. Wiley & Sons, Incorporated, John, 2010.
Find full textComposite sheet forming. Amsterdam: Elsevier, 1997.
Find full textBook chapters on the topic "Molding (forming)"
Sandberg, Dick, Otto Eggert, Andreas Haider, Fred Kamke, and André Wagenführ. "Forming, Densification and Molding." In Springer Handbook of Wood Science and Technology, 943–89. Cham: Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-030-81315-4_18.
Full textYao, Donggang. "Polymer Micro-Molding/Forming Processes." In Micro-Manufacturing, 197–233. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2011. http://dx.doi.org/10.1002/9781118010570.ch7.
Full textLópez-Adrio, David, and David Álvarez. "Polymers Injection Molding, Process & Defects." In Materials Forming, Machining and Tribology, 81–104. Cham: Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-48468-1_5.
Full textGarcía-Collado, Alberto, and Rubén Dorado-Vicente. "Understanding the Virtual Injection Molding Product Design." In Materials Forming, Machining and Tribology, 39–47. Cham: Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-48468-1_3.
Full textKajikawa, Shohei, Masaya Horikoshi, Takashi Kuboki, Soichi Tanaka, Kenji Umemura, and Kozo Kanayama. "Fluidity of Wood Composite Combined with Natural Binder on Injection Molding." In Forming the Future, 2031–40. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-75381-8_171.
Full textHuang, Yong, and Jinlong Yang. "Aqueous Colloidal Injection Molding of Ceramics Based on Gelation." In Novel Colloidal Forming of Ceramics, 1–15. Berlin, Heidelberg: Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-642-12281-1_1.
Full textYang, Jinlong, and Yong Huang. "Aqueous Colloidal Injection Molding of Ceramics (CIMC) Based on Gelation." In Novel Colloidal Forming of Ceramics, 1–16. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-1872-0_1.
Full textLiebl, Michael, Jonas Holder, Tobias Mohr, Albert Dorneich, Florian Liebgott, and Peter Middendorf. "Development, Implementation and Evaluation of a Prototype System for Data-Driven Optimization of a Preforming Process." In Advances in Automotive Production Technology – Towards Software-Defined Manufacturing and Resilient Supply Chains, 296–306. Cham: Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-27933-1_27.
Full textLi, Wenlian, and Wanjing Bo. "Teaching Research and Exploration of “Stamping Forming Technology and Molding Design” Course under the Background of New Engineering." In Advances in Social Science, Education and Humanities Research, 262–70. Paris: Atlantis Press SARL, 2024. http://dx.doi.org/10.2991/978-2-38476-263-7_34.
Full textShinozaki, Akira, and Junpei Kinoshita. "Precision Polishing Techniques for Metal Molding Dies and Glass Forming Technology “Slumping Method”." In Product Life Cycle - Opportunities for Digital and Sustainable Transformation [Working Title]. IntechOpen, 2021. http://dx.doi.org/10.5772/intechopen.99208.
Full textConference papers on the topic "Molding (forming)"
BELLISARIO, D. "Recycling of thermoset fiberglass by direct molding of ground powders." In Material Forming. Materials Research Forum LLC, 2024. http://dx.doi.org/10.21741/9781644903131-265.
Full textVELLA, A. "Rapid tooling development for low volume injection molding of cosmetic compacts." In Material Forming. Materials Research Forum LLC, 2023. http://dx.doi.org/10.21741/9781644902479-23.
Full textRAIMONDI, Luca. "Effects of UD and twill reinforcements in hybrid sheet molding compound laminates." In Material Forming. Materials Research Forum LLC, 2024. http://dx.doi.org/10.21741/9781644903131-58.
Full textSavva, George. "Coatings in Forming and Molding Applications." In 66th Society of Vacuum Coaters Annual Technical Conference. Society of Vacuum Coaters, 2023. http://dx.doi.org/10.14332/svc23.proc.0051.
Full textCLOËZ, Liam. "Machinability of PLA obtained by injection molding under a dry milling process." In Material Forming. Materials Research Forum LLC, 2024. http://dx.doi.org/10.21741/9781644903131-208.
Full textVU, Anh Tuan. "Surrogate modeling for multi-objective optimization in the high-precision production of LiDAR glass optics." In Material Forming. Materials Research Forum LLC, 2024. http://dx.doi.org/10.21741/9781644903131-197.
Full textYamada, J., H. Ibe, K. Sato, and N. Kato. "Functional WC Cemented Carbide by the Direct Selective Laser Forming." In ITSC2017, edited by A. Agarwal, G. Bolelli, A. Concustell, Y. C. Lau, A. McDonald, F. L. Toma, E. Turunen, and C. A. Widener. DVS Media GmbH, 2017. http://dx.doi.org/10.31399/asm.cp.itsc2017p0725.
Full textBELLISARIO, D. "Out-of-autoclave molding of carbon fiber composites pipes with interlaminar carbon nanotubes." In Material Forming. Materials Research Forum LLC, 2023. http://dx.doi.org/10.21741/9781644902479-194.
Full textLÜCKENKÖTTER, J. "Feasibility study of compression molding for large reinforcement structures in the commercial vehicle sector." In Material Forming. Materials Research Forum LLC, 2023. http://dx.doi.org/10.21741/9781644902479-27.
Full textBORTOLETTO, Anna. "Investigation of the effects of gas-counter-pressure injection molding on the properties and manufacturability of post-consumer recycled polypropylene." In Material Forming. Materials Research Forum LLC, 2024. http://dx.doi.org/10.21741/9781644903131-299.
Full text