Relevant bibliographies by topics / Modulu / Dissertations / Theses
To see the other types of publications on this topic, follow the link: Modulu.

Dissertations / Theses on the topic 'Modulu'

Author: Grafiati
Published: 1 April 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 dissertations / theses for your research on the topic 'Modulu.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Bláhová, Romana. "Design obytného modulu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-254324.

Full text
Abstract:
The topic of my diploma thesis is analysis and design proposal of residential module, which will respect functional, constructional, technological, esthetic and ergonomic regularities. The proposal is focused on new solution of shape of the container type residential module.
APA, Harvard, Vancouver, ISO, and other styles
2

Lokvencová, Jana. "Návrh vzdělávacího modulu." Master's thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2013. http://www.nusl.cz/ntk/nusl-374716.

Full text
Abstract:
In this thesis I focus on creating a project for children with special educational needs. The project, which the applicant is true and which school has the potential to be supported from EU funds, addresses the current situation of poor literacy in Czech Republic at primary schools, The thesis proposal to create a quality educational program for this target group not only the professional but also sustainable.
APA, Harvard, Vancouver, ISO, and other styles
3

Šindler, Roman. "Optimalizace sklonu fotovoltaického modulu." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2010. http://www.nusl.cz/ntk/nusl-218366.

Full text
Abstract:
This thesis deals with the solar radiation, which is one of the potential sources of the renewable energy. The purpose of this thesis is to apprise of the methods how to calculate the Sun’s position as well as to learn the basics of software VEE Pro 8.0. Also, create a program simulating the location of the Sun during the day according to the variable latitudes and days and consequently to calculate the Sun irradiation passing through the atmosphere onto the tilted solar module, considering the respective tilt. Theoretical part describes the transmition of the energy between Sun and Earth, global irradiation and its components, which are generated by beams passing through the atmosphere and incident on a solar module. Practical part is dedicated to a program creation according the theoretical basis and it is used for further simulation of the Sun’s position. Another program simulates the total daily and annual irradiation including its components onto the tilted solar module, considering the respective tilt.
APA, Harvard, Vancouver, ISO, and other styles
4

Bayer, Tomáš. "Návrh hardwarového šifrovacího modulu." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2009. http://www.nusl.cz/ntk/nusl-218076.

Full text
Abstract:
This diploma’s thesis discourses the cryptographic systems and ciphers, whose function, usage and practical implementation are analysed. In the first chapter basic cryptographic terms, symmetric and asymetric cryptographic algorithms and are mentioned. Also usage and reliability are analysed. Following chapters mention substitution, transposition, block and stream ciphers, which are elementary for most cryptographic algorithms. There are also mentioned the modes, which the ciphers work in. In the fourth chapter are described the principles of some chosen cryptographic algorithms. The objective is to make clear the essence of the algorithms’ behavior. When describing some more difficult algorithms the block scheme is added. At the end of each algorithm’s description the example of practical usage is written. The chapter no. five discusses the hardware implementation. Hardware and software implementation is compared from the practical point of view. Several design instruments are described and different hardware design programming languages with their progress, advantages and disadvantages are mentioned. Chapter six discourses the hardware implementation design of chosen ciphers. Concretely the design of stream cipher with pseudo-random sequence generator is designed in VHDL and also in Matlab. As the second design was chosen the block cipher GOST, which was designed in VHDL too. Both designs were tested and verified and then the results were summarized.
APA, Harvard, Vancouver, ISO, and other styles
5

Hladíková, Jana. "Zavedení modulu elektronického obchodování." Master's thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2008. http://www.nusl.cz/ntk/nusl-221780.

Full text
Abstract:
The diploma paper deals with the introducing of an e-business module in the MVDr. Ivo Dupal - SANVET company in which I have been currently working. The paper involves the Internet and e-business analyses and an analysis of the MVDr. Ivo Dupal - SANVET company and a proposal for the introduction of e-business in the above mentioned company. The paper also comprises an implementation proposal to solve this problem issue and its economic and managerial evaluation.
APA, Harvard, Vancouver, ISO, and other styles
6

Michálek, Lukáš. "Návrh modulu pro správu dokumentů." Master's thesis, Vysoká škola ekonomická v Praze, 2008. http://www.nusl.cz/ntk/nusl-165184.

Full text
Abstract:
In my diploma thesis I deal with requirements analysis of a document management system and with designing a particular solution of these requirements for the document management module of the web based Inovio portal. In the first part I provide basic information about document management systems and I briefly describe, what palace in the company`s information system they take. Further I describe the Inovio portal, which is under development, and it`s application modules. The document management module is one of these modules and my thesis is contributing to its design. The second part is focused on functional and non-functional requirements on a document management system and on a web application. In this part the reader can find requirements analysis and specific designs of these requirements for the document management module of the Inovio portal.
APA, Harvard, Vancouver, ISO, and other styles
7

Arnošt, Petr. "Návrh řídicího modulu UAV robotu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230255.

Full text
Abstract:
This diploma thesis is focused on the design of the control software for the unmanned aerial vehicle. Parrot Ar.Drone quadrocopter was a representative of the unmanned aerial vehicle. This thesis describes the way of control and communication with the unmanned aerial vehicle. Based of this information the flight control software for Ar.Drone quadrocopter is created.
APA, Harvard, Vancouver, ISO, and other styles
8

Vokoun, Ondřej. "Návrh a výroba kamerového modulu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230260.

Full text
Abstract:
Cílem diplomové práce je navrhnout levný, avšak dostatečně výkonný a univerzální systém, schopný snímání a zpracování obrazu z digitální kamery. Další částí je návrh a implementace funkcí pro zpracování obrazu a komunikace s nadřazeným systémem.
APA, Harvard, Vancouver, ISO, and other styles
9

Kudláček, Martin. "Servisního modulu pro automatickou sanitární techniku." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2018. http://www.nusl.cz/ntk/nusl-377028.

Full text
Abstract:
The aim of this thesis is to inform readers about the basic principle of electronics for which the service module for the automatic sanitary technique will be designed, as well as design and describe the most important parts of the module theoretically. Likewise, the thesis deals with the most common mistakes in the design of printed circuits boards with respect to the resistance of the resulting device against interference. The implementation itself includes both module design and a communication algorithm for connecting multiple service modules and their remote control using the Raspberry Pi minicomputer. The thesis also contains a design of algorithm for verification of data transmission by the transmission system.
APA, Harvard, Vancouver, ISO, and other styles
10

Matyščáková, Petra. "Design přídavného modulu k invalidnímu vozíku." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2009. http://www.nusl.cz/ntk/nusl-228776.

Full text
Abstract:
This graduation theses is engaged in design of additional module to wheelchair. The project should bring new solution of shape of the equipment, but at the same time keep the original frame. Final solution has sporty look and it results from inner construction and stifles sanitary sterility.
APA, Harvard, Vancouver, ISO, and other styles
11

Melichárek, Lukáš. "Návrh hardwaru řídícího modulu pro autobusové klimatizace." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2008. http://www.nusl.cz/ntk/nusl-217241.

Full text
Abstract:
This graduation theses is focus on hardware and software description for control module, which is part of air-condition unit made be company THERMO KING. All circuit connected thought buses like IIC,CAN and display are explain in detail.
APA, Harvard, Vancouver, ISO, and other styles
12

Ranuša, Matúš. "Návrh ventilového bloku rekuperačního hydrostatického modulu vozidla." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231450.

Full text
Abstract:
The Master`s Thesis deals with design and construction of a valve block for a hydrostatic recuperative module of a vehicle with a direct application on pneu tyred roller AP 240H produced by the AMMANN company. The thesis aims to analyze recovery functions of the valve block in several operating modes of the roller, followed by a selection of the right hydraulic components from the perspective of predefined parameters and pressure differences. Design specifications are based on measurements and mathematical simulations on the experimental stand. The experimental stand for this application has been developed at 1:4 scale as compared to a real vehicle. The thesis includes also design of the supporting console for the module on the frame of the vehicle. The Master`s Thesis is a part of project EUREKA with cooperation Bosch Rexroth.
APA, Harvard, Vancouver, ISO, and other styles
13

Stluka, Jakub. "Generování dat pomocí modulu LM Reverse-Miner." Master's thesis, Vysoká škola ekonomická v Praze, 2012. http://www.nusl.cz/ntk/nusl-150066.

Full text
Abstract:
In past years, great attention has been paid to evolutionary algorithms and they have been utilized in wide range of industries including data mining field, which nowadays presents a highly demanded product for many commercial institutions. Both mentioned topics are combined in this work. Main thesis subject is testing of new Reverse-Miner module, which can generate data with hidden properties using evolutionary algorithms while using also other modules of LISp-Miner system, commonly used for the purposes of data mining. Main goal lies in generation of two databases by the module in such way so they would meet explicitly set requirements. Other goals are also set within the thesis in the form of understanding the domain necessary for subsequent modeling. The result of the practical part of the thesis is represented not only by two successfully generated databases, but also by description of steps, methods and techniques used. The common recommendations for data preparation by module Reverse-Miner are later summarized, based on experience with modeling. Previous thesis outputs are furthermore contemplating the conclusion of analysis of technical means used for generation and they also provide several suggestions for possible future extensions.
APA, Harvard, Vancouver, ISO, and other styles
14

Brož, Kamil. "Uživatelská aplikace pro konfiguraci bezdrátového modulu Zigbee." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2012. http://www.nusl.cz/ntk/nusl-219439.

Full text
Abstract:
The diploma thesis includes the ZigBee networks and compares them with other PAN IEEE 802.15.4 networks. It describes the formation of ZigBee networks. It describes physical, MAC, network and application layer in the form of Bitcloud. Thesis includes practical implementation in the form of ZigBee application BeeCon which allows set network parameters on Iris modules.
APA, Harvard, Vancouver, ISO, and other styles
15

Kaščák, Pavol. "Rozšíření použití modulu UIS v mobilních zařízeních." Master's thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2013. http://www.nusl.cz/ntk/nusl-223841.

Full text
Abstract:
This master thesis deals with the design of extending UIS module for mobile devices. First part of this thesis is dedicated to the analysis and justification to the benefit of mobile devices with focus on available mobile platforms. Subsequently, this thesis describes theoretical backgrounds upon which is based my own solution in perspective of software life cycle and SCRUM project management.
APA, Harvard, Vancouver, ISO, and other styles
16

Blaženka, Aleš. "Realizace modulu informačního systému pro příjem objednávek." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2009. http://www.nusl.cz/ntk/nusl-228397.

Full text
Abstract:
The diploma thesis deals with the adaptation of the information system module for receiving electronic orders. The aim of the work is the implementation of changes into the company information system. The thesis describes and analyzes the situation before the beginning of the adaptation process of the information system. The next part of the thesis discusses suggested changes and timetable for the implementation of the adjustments into the system. The final part deals with the implementation of both the changes and new information system module. The practical part of the thesis discusses the issues of replacing the current HW equipment, network interconnection of single devices, adjustments in the ORACLE database and in a part of the information system programmed in the object oriented language SmallTalk.
APA, Harvard, Vancouver, ISO, and other styles
17

Ižarík, Marek. "Automatické ostření s využitím CAN-EF modulu." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2016. http://www.nusl.cz/ntk/nusl-240914.

Full text
Abstract:
The main topic of this master thesis is creating, testing and implementation of algorithms for autofocus with Canon camera lens using CAN-EF interface, while one of the assignments is possibility to continuous focus to the vehicle in traffic monitoring. There are tested a number of criteria for the assessment if sharpness in the image and is designed automatic control system of the lens and camera.
APA, Harvard, Vancouver, ISO, and other styles
18

Kotas, Vojtěch. "Experimentální zkoušení modulu pružnosti podkladních vrstev vozovek." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2017. http://www.nusl.cz/ntk/nusl-265529.

Full text
Abstract:
The thesis is focused on experimental testing of resilient modulus Mr with triaxial test of chosen unbounded and bounded mixtures used in the sub-base layer of pavement. The reason of testing is to compare results with TP 170 – pavement construction guide containing commonly used values of resilient modulus Mr. Thesis should check if those values are correct and real. For classification of chosen materials there are used another tests like grain size distribution, compaction, California bearing ratio CBR for unbounded mixtures and compressive strength for cement-bounded mixtures.
APA, Harvard, Vancouver, ISO, and other styles
19

Rojček, Martin. "Miniaturizace a zvýšení dosahu modulu W-DMX v1.0." Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2010. http://www.nusl.cz/ntk/nusl-235545.

Full text
Abstract:
The aim of this master thesis is to design a wireless system which would be primarily used for a control of stage lighting. Our idea is to establish wireless links, that will carry DMX512 protocol, between individual lighting devices based on wireless transceiver nRF2401A. The foundation of our project comes from a previous design, which was not completely suitable for a practical use because of its rather large proportions and a short RF range. The project resolves the issue of relatively short range coverage through the deployment of RF amplifier RF5722. In the same tme, it also takes into account other technical aspects such as the use of antenas with a higher gain, front-end circuits or increased transmission reliability through frequency hopping scheme. Proper attention is also given to a minimalization of the module dimensions by using SMD components and layout adjustements, so it would be possible to place the whole board inside XLR connector. Set of printed circuit boards with the specified characteristics, which is the expected outcome of our project, were designed with Eagle PCB design environment.
APA, Harvard, Vancouver, ISO, and other styles
20

Ohnút, Lukáš. "Optimalizace procesu vstřikování součásti dávkovacího modulu dieselového motoru." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-445177.

Full text
Abstract:
This diploma thesis deals with optimalization of the injection process of the part and its implementation into serial production. In the first step, the injection mold was tested and injection parameters were initially defined. In the next step, simulations were created in the CADMOULD program. These simulations calculated theoretical injection parameters and these were compared with the parameters set on the injection molding machines. Then, the shape measurement protocols were prepared, according to which the shapes in the cavities of the injection mold were optimized. Finally stress tests were performed, which detected problems in the injection process.
APA, Harvard, Vancouver, ISO, and other styles
21

Saktor, Marek. "Vývoj modulu pro správu dokumentů interaktivní reklamní agentury." Master's thesis, Vysoká škola ekonomická v Praze, 2009. http://www.nusl.cz/ntk/nusl-11611.

Full text
Abstract:
This work documents the whole process of developing an information system for a small advertising agency. Its main sphere of business is the internet, hence the company is classified as a digital or interactive agency. My objectives are: analyzing business processes, assembling the functional specification and developing the core of the application and the module for a document management. I start with gathering some common parameters of DMS along with requirements for a web application framework, which is intended to use for a base of the intranet. Then I move to presenting specifics of our agency and I analyze its processes in order to capture all content and desired functionality of the developed system. Next phase is dedicated to design. First, I set the intranet in the context of global Enterprise architecture. I continue with modeling all architectural layers (conceptual, technological and implemental). The application is modular and benefits from using MVC architectural pattern. DMS module implements workflow functionality and I have used principles of Workflow Management Coalition to design that features. The last part of my work describes developed modules in more detail. My objectives were accomplished, core of the intranet is developed and currently in process of testing.
APA, Harvard, Vancouver, ISO, and other styles
22

Jílek, Tomáš. "Dálkové softwarové ovládání platformy bezdrátového modulu mobilního robotu." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-218894.

Full text
Abstract:
The thesis discusses the possible ways of remote management of devices running Mikrotik RouterOS and choosing appropriate variant for implementation of automated remote management of the device, which is part of a mobile robot. Due to the limited capabilities of embedded system, from which it is necessary to perform automated remote management of device with this operating system, it was not possible to use standardized protocols for this purpose. A substantial part of this work therefore deals with analysis and detailed documentation of proprietary protocols implemented in the MikroTik RouterOS operating system, which are suitable for implementation in an embedded system, from which it is necessary to perform automated remote management. The conclusion describes the principle of the proposed and realized implementation of proprietary protocols in C language. The described implementation is part of the library, which provides automated remote management using these protocols.
APA, Harvard, Vancouver, ISO, and other styles
23

Kuchař, Martin. "Stanovení modulu pružnosti zdiva ve směru ložné spáry." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227159.

Full text
Abstract:
The determination of strain properties of masonry in the direction parallel to bed joints is a fundamental pre-requisite for designing structures, where masonry is subjected to horizontal stresses (e. g. strengthening with prestressing). The diploma thesis summarized techniques of determination of masonry modulus of elasticity presented in available literature. The goal is to suggest suitable methodology of determination of masonry modulus in direction parallel to the bed joints. In the practical part of the diploma thesis is that methodology verified by experimental test and results of tests are analyzed and discussed.
APA, Harvard, Vancouver, ISO, and other styles
24

Šulc, Dalibor. "Návrh softwarového modulu trenažéru přistání na padákovém kluzáku." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229865.

Full text
Abstract:
The aim of this diploma thesis is software designed to simulate landing of the paragliding wing. It means the development of the mathematic model describing the final stage of flight and landing. The model comprises the effects of controls (brakes, speed bar, weight-shifting). One part of the thesis is the description of the implementation in C# language with complete source codes.
APA, Harvard, Vancouver, ISO, and other styles
25

Zigo, Ľubomír. "Návrh inteligentního optimalizačního modulu pro podnikový informační systém." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230194.

Full text
Abstract:
Diplomová práca sa zaoberá návrhom a realizáciou inteligentného optimalizačného modulu pre podnikový informačný systém. Optimalizačný modul bude vytvárať celoročné plány údržby s rovnomerným množstvom údržbárskych aktivít v jednotlivých týždňoch a plány pre výrobu s pravidelnými odstávkami. V úvode je uvedený prehľad použiteľných optimalizačných metód, z ktorých sú vybrané metódy pre ďalšiu fázu, testovanie. Nelineárna metóda najmenších štvorcov z Matlab Optimization Toolbox, genetický algoritmus a ABC algoritmus budú otestované na zadanej plánovacej úlohe. Na základe výsledkov testu bude najlepšia metóda implementovaná v podnikovom informačnom systéme. Takto doplnený informačný systém umožňuje vytvárať kvalitnejšie plány údržby a tým zvýšiť celkovú efektivitu podniku.
APA, Harvard, Vancouver, ISO, and other styles
26

Žalman, David. "Analýza vymezovací pružiny natáčecího světelného modulu světlometu automobilu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231167.

Full text
Abstract:
The topic of this master´s thesis is the strain-stress analysis of the spacer-spring for the swivel light projector of car headlamp. The spacer-spring is used for delimitation of moving swivel light projector in relation to turning drive. During vibration test there is a danger of limit state of fatigue failure.
APA, Harvard, Vancouver, ISO, and other styles
27

Halamová, Romana. "Problematika zjišťování statického modulu pružnosti betonu v konstrukcích." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2017. http://www.nusl.cz/ntk/nusl-265362.

Full text
Abstract:
The thesis deals with the measurement of the elastic modulus of concrete in existing structures and possibilities of applicability of equations for the calculation of characteristic values of concrete compressive strength on the modulus of elasticity. The modulus of elasticity is determined by dynamic and static methods on specimens taken from the concrete blocks, whose composition varies by a water cement ratio and varying amounts of admixtures. In conclusion, the results of the measurements are compared and the characteristic values of the modulus of elasticity is determined.
APA, Harvard, Vancouver, ISO, and other styles
28

Pecho, Ladislav. "Vytvoření modulu jádra a konfigurace síťového serveru pro operační systém Linux." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2010. http://www.nusl.cz/ntk/nusl-218670.

Full text
Abstract:
The goal of my work is to create two computer labs lessons. The first one is a guide in writing a simple Linux kernel module, and in making a file inside the procfs filesystem. The content of the file can be decided as late as at the moment of reading. The second lesson describes the configuration of a server which allows a computer to boot over network. DHCP server is used with a TFTP server for file transfers which are both handled by the dnsmasq program. The example configuration will display a menu on the client station. It is possible to select to boot either a Linux kernel, floppy disk image, Linux network installer, diagnostic tool Memtest, or a text mode game Grub Invaders. The chosen bootloader is pxelinux from the syslinux project.
APA, Harvard, Vancouver, ISO, and other styles
29

Svoboda, Vít. "Návrh alternativních způsobů spojení víka a tělesa olejového modulu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231666.

Full text
Abstract:
This diploma thesis describes the design of new connections and modification of existing connections cover and housing of oil module for trucks. This connection must resist the effects of operating oil trucks modules. These effects include pressure pulsation, temperature fluctuations, vibrations and weather conditions. The most important is the resistance of cover to rotation and loss of tightness. The work includes research of different connections usable for this application. Other research focuses on the use of connection of other manufacturers in the market. The work included a proposal of possible solutions for the modification of cover and housing and their evaluation using specified criteria with rating matrix. The final part deals with the development of the three best evaluated proposed solution. For each solution is made as necessary calculations, drawings and next steps of implementation of individual solutions.
APA, Harvard, Vancouver, ISO, and other styles
30

Michálek, Lukáš. "Vývoj modulu pro správu dokumentů v rámci portálu INOVIO." Master's thesis, Vysoká škola ekonomická v Praze, 2008. http://www.nusl.cz/ntk/nusl-4992.

Full text
Abstract:
In my diploma thesis I deal with requirements analysis of a document management system and with designing a particular solution of these requirements for the document management module of the web based Inovio portal. In the first part I provide basic information about document management systems and I briefly describe, what palace in the company`s information system they take. Further I describe the Inovio portal, which is under development, and it`s application modules. The document management module is one of these modules and my thesis is contributing to its design. The second part is focused on functional and non-functional requirements on a document management system and on a web application. In this part the reader can find requirements analysis and specific designs of these requirements for the document management module of the Inovio portal.
APA, Harvard, Vancouver, ISO, and other styles
31

Frnka, Josef. "Návrh modulu systému komunikace se zákazníkem v průběhu projektu." Master's thesis, Vysoká škola ekonomická v Praze, 2011. http://www.nusl.cz/ntk/nusl-162559.

Full text
Abstract:
Main goal of this thesis is to design module of communication for a small company specializing in development of complex software. There are communication problems in project management, that result in loss of important informations. I will present the theoretical principles of project communication and use them to identify main problems. Using this conclusions I will design a new internal system module and install it into organization, then i will summarize feedback received from employes. At the end of the thesis i will evaluate benefits for the organization.
APA, Harvard, Vancouver, ISO, and other styles
32

Lelek, Martin. "Návrh modulu inteligentní sítě pro 2D sběr radiačních dat." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2018. http://www.nusl.cz/ntk/nusl-376893.

Full text
Abstract:
This thesis describes about theoretical design and practical realization of self-contained module for intensity and absorbed dose measuring of X-Radiation from High Voltage X-RAY industrial sources. In the first part, thesis is focused on ways and solutions of radiation protection and principles of measuring absorbed dose and intensity of radiation and possibilities of sending measured data through sensor networks. In the second part, the complete schematic of measuring module is solved, critical blocks are tested and design of PCB is done. Detection circuit, blocks for optical and acoustic signaling, power management and control of the entire device are designed. Detection circuit uses a GM Tube. Next, main box of whole device is designed and made by 3D printing technology. The next step is putting hardware into operation and writing test firmware included verification of wireless communication through WiFi.
APA, Harvard, Vancouver, ISO, and other styles
33

Bartulíková, Radka. "Vliv provzdušnění a ošetřování na vývoj modulu pružnosti betonu." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2013. http://www.nusl.cz/ntk/nusl-225737.

Full text
Abstract:
Master's thesis deals with influence of various factors on the concrete compressive strength and modulus of elasticity. This work concentrates mainly on the influence of early curing and air entrainment of concrete. One part of this work is the evaluation of laboratory measurement, which was carried out on cubes of standard and norm prisms. The development of elastic moduli was monitored in time to 730 days of age with respect to air entrainment and curing conditions. The second part of the experiment deals with a comparison of theoretical creep curves depending on the value of the modulus of elasticity based on different standards. Again, the air entrainment effect and influence of initial conditions are reflected.
APA, Harvard, Vancouver, ISO, and other styles
34

Grygar, Josef. "Návrh a realizace modulu optického přijímače pro VLC aplikace." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2017. http://www.nusl.cz/ntk/nusl-316402.

Full text
Abstract:
This work is focused on free space optical communication in visible electromagnetic spectrum known as visible light communication (VLC). Basic parameters of standard IEEE 802.15.7, advantages and disadvantages are discussed in the theoretical part of this work. Furthermore, optical link and it´s parts are described. The largest part of the work is focused on design and simulation of optical receiver for visible spectrum. Selection of component, noise and SNR calculation is discussed as well. This work also includes calculation of power energy in different parts of optical connection, PCB design of optical receiver, transmitters and power supply and output board. Behavior and parameters of electronic circuits, components and optical connection are explored, measured and compared with theoretical values.
APA, Harvard, Vancouver, ISO, and other styles
35

Kopička, Marek. "Dynamické modely výrobních modulů." Doctoral thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2021. http://www.nusl.cz/ntk/nusl-446740.

Full text
Abstract:
The dissertation thesis deals with the design of the concept and implementation of models of electrical power system elements with regard to the potential of the use of computer programs – simulations. The solution of the thesis focuses on the compliance simulations of power-generating modules according to RfG (Requirements for Generators), as a document which setting out the requirements for the connection of power-generating facilities and also focuses on the issue of smart grids and MAS (Multi-Agent Systems) respectively. The framework of the thesis is thus defined by the area of requirements for power-generating modules according to legislative requirements (not only RfG, but also related standards incl. DSC (Distribution System Code), CSN EN 50438 and CSN EN 50549), requirements for agent functionalities and power-generating module abilities to operate in synchronous and island operation, including transitions between them, the process of synchronization (phasing) and communication between the individual elements of the power system.
APA, Harvard, Vancouver, ISO, and other styles
36

Molák, Josef. "Základnová stanice pro agentní platformu WSageNt s využitím GSM modulu." Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2012. http://www.nusl.cz/ntk/nusl-236532.

Full text
Abstract:
This master's thesis describes the software and hardware extension of multiagent platform WSageNt to ensure communication between basestation and web interface Control Panel using GSM network. Sensor node FITmote is used as a basestation and modem Teltonika is used as a interface to GSM. The physical interconnection of the devices implementing the newly created bridge to connect different logic voltage levels of their serial interface. Application for basestation was extended to serial communication with modem. This extend provide communication over GSM network to Internet. Application on control server also was modified for TCP/IP communication.
APA, Harvard, Vancouver, ISO, and other styles
37

Rusinský, Jan. "Použití GPRS modulu pro přenos JPG souborů v reálném čase." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2010. http://www.nusl.cz/ntk/nusl-218336.

Full text
Abstract:
This document describes a design procedure of interface between VGA camera and GSM/GPRS modem for displaying JPEG pictures captured by camera on website. Interface is realized by eight-bit micricontroller ATMEL with application written in C language. For picture transfer to server a TCP/IP stack is implemented into modem. The document is divided into two main parts. The first part describes architecture of the system, used components (camera, modem, microcontroller) and electronic circuit design. The second part of the document is focused on the software for the system. Firstly operating system of modem is desribed, OpenAT development environment for modem application design and WIPsoft library, which is used to implement TCP/IP stack. Next is described application for microcontroller which controlls camera and modem. Last part of this document describes server application and web interface.
APA, Harvard, Vancouver, ISO, and other styles
38

Ludva, Stanislav. "Návrh a výroba modulu pro řízení motorů na nízká napětí." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-317187.

Full text
Abstract:
The aim of this diploma thesis is to design and implement a universal driver unit designed to control electric motors of small voltages – electronically commutated, DC and stepper. This involves creating topology and selecting appropriate components based on the required parameters. It also includes the manufacture of printed circuit board (PCB), soldering of the components and programming of the necessary functions. Thesis contains the analysis of three selected types of motors – the principle of operation, wiring and control. Testing of the control unit was performed at the end of the work.
APA, Harvard, Vancouver, ISO, and other styles
39

Potočková, Michaela. "Vliv vícenásobného cyklického zatěžování na hodnotu statického modulu pružnosti betonu v tlaku v konstrukcích." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-240134.

Full text
Abstract:
This thesis deals with the dependence of static modulus of elasticity of concrete in compression on number of load cycles. The deformation of test specimens during multiple cyclic loading was measured with resistive strain gages. Up to 1600 load cycles was conducted. Static modulus of elasticity in compression was determined from measured deformations. The aim of this thesis is assessment changes in the values of static modulus of elasticity depending on the number of load cycles.
APA, Harvard, Vancouver, ISO, and other styles
40

Balíčková, Alžběta. "Řízení výzkumných a vývojových projektů v PS modulu informačního systému SAP." Master's thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2015. http://www.nusl.cz/ntk/nusl-224806.

Full text
Abstract:
This master thesis focuses on the analysis and design of accounting, tax and legal methods of research and development projects. In the first part of this thesis are mention a theoretical background of research and development projects. Another part deals with the management of research and development projects. The following part is a financial and strategic analysis and analysis of the current status of research and development projects in the community. The design part is determined by the accounting, tax and legal methodology for managing research and development projects and is designed to control process research and development project under the previous methodology and using SAP. In conclusion, the benefits of this methodology defined for the selected company.
APA, Harvard, Vancouver, ISO, and other styles
41

Švábíková, Anna. "Návrh optomechanického modulu pro chemické mapování metodou spektroskopie laserem buzeného plazmatu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-402524.

Full text
Abstract:
Tato diplomová práce se zabývá návrhem optomechanického modulu pro chemické mapování metodou spektroskopie laserem buzeného plazmatu (LIBS). Cílem je vyvinout modul, který bude umožňovat analýzu spektrálních čar zinku v ultrafialové (UV) oblasti. V práci jsou popsány teoretické základy metody LIBS a následně je provedena rešerše zaměřená na problematiku dálkové LIBS analýzy. V diplomové práci jsou prezentovány možné optické návrhy fokusační a sběrné optiky, z nichž jsou vybrané následně otestovány. Výsledkem práce je konstrukční návrh modulu.
APA, Harvard, Vancouver, ISO, and other styles
42

Közl, Radim. "Vytvoření modulu SERIZOVNY v programovém subsystému pro řízení nástrojového hospodářství NAHOS." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-228081.

Full text
Abstract:
The aim of this diploma thesis is to create module adjusting of tools for NAHOS information system developed on VÚSSaR FSI VUT Brno a ÚVI FT UTB ZlínTAJMAC - ZPS a.s., where system is applied. Theoretical part contains analysis of preparation activities for tools for manufacturing process – assembling, measuring and adjusting tools. Practical part contains database design and forms for NAHOS system. In this part the SQL language in database system MS Access is used. The solution uses elements of NAHOS system, which are accessible using XML language.
APA, Harvard, Vancouver, ISO, and other styles
43

Fargačová, Tamara. "Komparace funkcionality standardní BI platformy a BI modulu integrovaného v ERP systému." Master's thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2018. http://www.nusl.cz/ntk/nusl-378368.

Full text
Abstract:
This master’s thesis deals with comparison of the standard Business Intelligence platform specifically IBM Cognos BI and BI module integrated in the ERP system QI. In the first part it defines basic concepts of this topic and describes the life cycle of business information systems with emphasis on Business Intelligence. In the next part current situation on the market of these platforms and BI tools which create management information systems is described. Both types of BI solutions are compared with concentration on standard functionality usage. It also describes their ability to analyze through using data warehouse technology, integration with third-party products and business and economic aspects.
APA, Harvard, Vancouver, ISO, and other styles
44

Hoduláková, Michaela. "Experimentální ověření modulu pružnosti v tlaku jemnozrnných kompozitů na bázi silikátových pojiv." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2017. http://www.nusl.cz/ntk/nusl-265508.

Full text
Abstract:
Since their inception, building materials are constantly improving. New ways to explore and improve the material's properties are constantly investigated (especially to improve the mechanical and deformation characteristics of the materials). This thesis is focused on identifying and comparing values of the modulus of elasticity of fine-grained composites. These features are compared with respect to water cement ratio, ageing and compressive strength of the investigated materials. Afterwards, the values of the modulus of elasticity are studied in the relation to the tested materials.
APA, Harvard, Vancouver, ISO, and other styles
45

Vetýška, Jan. "Kritické faktory implementace modulu APO do systému SAP ve vybrané výrobní společnosti." Master's thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2017. http://www.nusl.cz/ntk/nusl-318319.

Full text
Abstract:
The thesis deals with the issue of the implementation of the corporate information system of the ERP category, specifically the introduction of the module of APO for SAP in the chosen manufacturing company. The work presents the theoretical fundamentals describing the basics of ERP along with available methodologies, the implementation of these systems. Also analyzes the frequent causes of delayed implementation projects and provides the basis for the search for the causes of the problems. In the next section it is made an overall analysis of the current state of the ERP system in the company. At the conclusion of this work are defined recommendations, which can be prevented critical factors and implementation could be completed according to the established timetable.
APA, Harvard, Vancouver, ISO, and other styles
46

Soukup, Milan. "Návrh a tvorba nadstavbového softwarového modulu pro správu dokumentů a informací malé firmy." Master's thesis, Vysoká škola ekonomická v Praze, 2012. http://www.nusl.cz/ntk/nusl-113940.

Full text
Abstract:
This thesis deals with the theory of information within the framework of the socio-economic systems. The first part includes consultation of theories that relate to information and other information needs, including drawing implications for the chosen target segment of microfirms. The practical part is devoted to the design and creation of advanced software module for the information management and documents of the selected small company. The resulting application is put into practice, the benefits are measured and recommendations for further development are identified.
APA, Harvard, Vancouver, ISO, and other styles
47

Krejčí, Jan. "Implementace komunikačních protokolů pro IoT s využitím rozšiřujícího modulu UniPi pro Raspberry Pi." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2017. http://www.nusl.cz/ntk/nusl-317015.

Full text
Abstract:
Presented diploma thesis is focused on the implementation of Wireless M-Bus protocol to embedded device RaspberryPi with expansion board UniPi. The protocol is implemented in Python with Wireless M-Bus devices communicating via IQRF transceiver connected to the UART bus. The theoretical part is focused on an overview of embedded devices for the IoT, the possibility of their expansion. Further, the UniPi expansion board and Wireless M-Bus transceiver are detailed. First part of the thesis focuses on the Wireless M-bus layers, which provides a basic knowledge for understanding the practical part. The theoretical part concludes overview of captured devices including a description of their data units. In the practical part is the implementation of the sample application for receriving data from a Wireless M-Bus sensors. The application is able to read data from devices transmitting encrypted communication.
APA, Harvard, Vancouver, ISO, and other styles
48

Albrecht, Ladislav. "Realizace kamerového modulu pro mobilní robot jako nezávislého uzlu systému ROS - Robot Operating System." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417773.

Full text
Abstract:
Stereo vision is one of the most popular elements in the field of mobile robots and significantly contributes to their autonomous behaviour. The aim of the diploma thesis was to design and implement a camera module as a hardware sensor input, which is independent, with the possibility of supplementing the system with other cameras, and to create a depth map from a pair of cameras. The diploma thesis consists of theoretical and practical part, including the conclusion of results. The theoretical part introduces the ROS framework, discusses methods of creating depth maps, and provides an overview of the most popular stereo cameras in robotics. The practical part describes in detail the preparation of the experiment and its implementation. It also describes the camera calibration and the depth map creating. The last chapter contains an evaluation of the experiment.
APA, Harvard, Vancouver, ISO, and other styles
49

Štekbauer, Hynek. "Vypracování algoritmu a příslušného programového modulu pro statické a dynamické řešení lan na kladkách." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227641.

Full text
Abstract:
The goal of this master thesis is to develop an algorithm for solving cables on pulleys, which would be more efficient and accurate than existing algorithm used in software RFEM. This algorithm was integrated to the program for static and dynamic analysis of structures, in the form of particular program module. This work also contains examples of using this algorithm. The comparison of expected results with outcomes from the program is presented. The suitability for common practise is examined based on this comparison. The examples showed that the new algorithm for solving of cables on pulleys is more powerful and more accurate than existing solutions and most likely does not has equivalent competition.
APA, Harvard, Vancouver, ISO, and other styles
50

Petráčková, Klára. "Stanovení modulu pružnosti v tahu tenké vrstvy - numerická analýza zkoušky mikrokompresního vzorku a "bulge testu"." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230777.

Full text
Abstract:
Determination of mechanical properties of very thin films is rather difficult task as all of currently using testing techniques have some weakness. This master’s thesis deals with microcompressive test and bulge test. Finite element simulations of the two methods were carried out in order to better understanding of experimental record. Microcompression combines the sample preparation with the use of focused ion beam (FIB) with a compression test carried out using nanoindenter. Cylindrical specimens (pillars) were prepared from Al film deposited on Si substrate using FIB. Experimentally measured data on pillars needs correction to obtain undistorted material properties of Al thin film. A necessary correction using FE modeling is suggested in the thesis. Second part of the work is focused on modeling of bulge test. Pressure is applied on freestanding SiNx film while deflection of the film is measured. Stress state in the film is biaxial making determination of mechanical properties of the film more complicated. The goal is to present how to model the whole problem. In addition, preparation of the specimens was simulated to estimate residual stress in the film. The paper contributes to a better characterization of very thin surface layers and determination of their mechanical properties.
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the bibliographies on the topic 'Modulu' for other source types:
Journal articles Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography