Relevant bibliographies by topics / Modelling and simulation in information systems

Academic literature on the topic 'Modelling and simulation in information systems'

Author: Grafiati
Published: 10 December 2022
Last updated: 28 January 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Contents

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Modelling and simulation in information systems.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Modelling and simulation in information systems"

1

Ontuzheva, G. A., E. R. Bruchanova, I. N. Rudov, N. O. Pikov, and O. A. Antamoshkin. "Simulation modelling of the heterogeneous distributed information processing systems." IOP Conference Series: Materials Science and Engineering 450 (November 30, 2018): 052018. http://dx.doi.org/10.1088/1757-899x/450/5/052018.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Hilmola, Olli Pekka, and Lauri Lättilä. "Simulation modelling challenge of transportation logistics systems." International Journal of Business Information Systems 14, no. 4 (2013): 429. http://dx.doi.org/10.1504/ijbis.2013.057498.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Dada, Maria. "Queering Geographic Information information Systems." A Peer-Reviewed Journal About 8, no. 1 (August 15, 2019): 58–68. http://dx.doi.org/10.7146/aprja.v8i1.115415.

Full text
Abstract:
What’s the relationship between GIS and the political subject? In an effort to address this question, this paper traces the movement from the map to GIS. The map is shown to be the performative utterance of the state, one that supports its national discourse and narrative. GIS, on the other hand, is shown to be a device of neoliberal governmentality, its non-representational economic practices, divided discourse and subjectivities. Despite the seemingly hopeless situation surrounding GIS, however, certain simulation and modelling practices are attempting to construct subjectivities out of economic neoliberalism’s fractured narratives. They do this by reading meaning into otherwise mathematical datasets and models. These practices could form a basis for queering GIS.
APA, Harvard, Vancouver, ISO, and other styles
4

Sakalauskas, Leonidas. "Modelling and simulation of business systems." European Journal of Operational Research 175, no. 3 (December 2006): 1339. http://dx.doi.org/10.1016/j.ejor.2005.02.010.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Bawden, David. "Information Systems and Databases as Alternatives." Alternatives to Laboratory Animals 18, no. 1_part_1 (November 1990): 83–89. http://dx.doi.org/10.1177/026119299001800112.1.

Full text
Abstract:
The influence of information technology on the development of computerised information systems which can contribute to reduction and replacement of animal experimentation is considered. Particular emphasis is placed on access to information from computer databases as an alternative in itself. The role of databases in support of modelling (molecular and statistical), simulation and risk assessment is also described.
APA, Harvard, Vancouver, ISO, and other styles
6

Ogunbiyi, Niyi, Artie Basukoski, and Thierry Chaussalet. "Investigating the Diffusion of Workload-Induced Stress—A Simulation Approach." Information 12, no. 1 (December 26, 2020): 11. http://dx.doi.org/10.3390/info12010011.

Full text
Abstract:
Work-induced stress is widely acknowledged as harming physical and psychosocial health and has been linked with adverse outcomes such as a decrease in productivity. Recently, workplace stressors have increased due to the COVID-19 pandemic. This study aims to contribute to the literature base in a couple of areas. First, it extends the current knowledge base by utilising generative additive modelling (GAMs) to uncover the nature of the relationship between workload (a key workplace stressor) and productivity based on real-world event logs. Additionally, it uses recursive partitioning modelling to shed light on the factors that drive the relationship between these variables. Secondly, it utilises a simulation-based approach to investigate the diffusion of workload-induced stress in the workplace. Simulation is a valuable tool for exploring the effect of changes in a risk-free manner as it provides the ability to run multiple scenarios in a safe and virtual environment with a view to making recommendations to stakeholders. However, there are several recognised issues with traditional simulation approaches, such as inadequate resource modelling and the limited use of simulations for operational decision making. In this study, we propose an approach which extracts the required parameters from an event log and subsequently utilises them to initialise a workload-induced stress diffusion simulation model accurately. We also explore the effects of varying the parameters to control the spread of workload-induced stress within the network. With suitable amendments, this approach can be extended to model the spread of disease (e.g., COVID-19), diffusion of ideas, among other things, in the workplace.
APA, Harvard, Vancouver, ISO, and other styles
7

Kluska, Kamila. "Automatic simulation modelling of warehouses." Logforum 17, no. 1 (March 30, 2021): 59–69. http://dx.doi.org/10.17270/j.log.2021.547.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Plinta, Dariusz, Martin Krajčovič, Radovan Svitek, and Patrik Grznár. "Computer aided design of logistics systems." Multidisciplinary Aspects of Production Engineering 2, no. 1 (September 1, 2019): 416–24. http://dx.doi.org/10.2478/mape-2019-0042.

Full text
Abstract:
Abstract This paper presents a possibility of applying modelling and simulation in logistic processes management and design in production enterprises. New functionalities of the modelling software, especially those connected with analysing material and information flow, are already necessary for designing and evaluating complex logistic systems. The possibilities of modelling and simulation with the use of the CET Table system are illustrated by practical example.
APA, Harvard, Vancouver, ISO, and other styles
9

Subramanian, Shreyas Vathul. "Modelling and simulation of system-of-systems using P-systems theory." International Journal of System of Systems Engineering 8, no. 3 (2018): 231. http://dx.doi.org/10.1504/ijsse.2018.093893.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Subramanian, Shreyas Vathul. "Modelling and simulation of system-of-systems using P-systems theory." International Journal of System of Systems Engineering 8, no. 3 (2018): 231. http://dx.doi.org/10.1504/ijsse.2018.10014857.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Modelling and simulation in information systems"

1

Eatock, Julie. "Dynamic integrated modelling of information systems and business process simulation." Thesis, Brunel University, 2003. http://bura.brunel.ac.uk/handle/2438/5248.

Full text
Abstract:
Business processes and information technology are two areas that are very closely related to the sustained competitive advantage in organisations. However, investment in information technology often leads to disappointment, which may in part be due to the non-alignment of the information system domain with the business process domain. Simulation modelling is an established technique often used in business process change projects, as it allows a comparison of different possible scenarios without the expense of physically implementing the system. However business process simulation fails to effectively capture the information systems perspective in the model. This thesis contends that by combining information systems modelling techniques with business process simulation the model will be able to capture all the four perspectives (functional, behavioural, organisational and informational) of an organisation, and the design of the business processes and the information system will be better aligned. Initially, attempts were made to integrate business process simulation with computer network simulation in a simple two- or three-layered simulation model, but this gave rise to significant problems the most significant being the underlying assumptions of the original hypothesis. This led to a refined hypothesis in which the layered models were discarded along with the network domain. The revised hypothesis aimed to capture the informational changes that occur in the information system and therefore combines prototyping with business process simulation. This overcomes the unsafe assumptions of the initial hypothesis about whether the system is 'correct' and provides a method of validating the design of the information system within the context of the business processes. The integrated model allows concurrent design of the information system domain and the business process domain and therefore ensures that the domains are better aligned. The framework is tested on a case study and the results indicate that it is an effective tool in the combined design of business processes and information systems.
APA, Harvard, Vancouver, ISO, and other styles
2

Serrano, Rico Alan Edwin. "Stochastic Information Technology Modelling for Business Processes." Thesis, Brunel University, 2002. http://bura.brunel.ac.uk/handle/2438/2035.

Full text
Abstract:
Business Processes (BP) and Information Technology (IT) are two areas that work very closely in helping organisations to keep or retain competitive advantage. Therefore, design in these areas should consider the advantages provided by, and the limitations that each of these domains imposes on each other. BP design tries to ensure that IT specifications are considered during the design of BP. Similarly, Information Systems (IS) design attempts to capture organisational needs, known as IS functional and Non-Functional Requirements (NFR), in order to meet the organisational goals. Despite this, BP and IT modelling techniques barely depict the way IT may affect BP performance or vice versa. For example, Business Process Simulation (BPS) is one of the modelling techniques that has been increasingly used to support process design. The performance measurements obtained from BPS models, though, are obtained considering only organisational issues, and thus cannot be used to assess the impact that IT may have on process performance. Similarly, IT modelling techniques do not provide IS performance measurements, and hence cannot depict the way IS may improve BP performance. The relationship between BP and IT can be alternatively described in terms of the relationships between BP, IS and Computer Networks (CN). By looking at the parameters that govern these relationships a simulation framework was developed, namely ASSESS-IT, that develops simulation models that provide performance measurements of BP, IS and CN, and thus can reflect the impact that IT (IS and CN) may have on BP performance. This research uses a case study to test the proposed framework (theory testing), to understand the way BP, IS, and CN domains interact (discovery), and to propose alternative theories to solve the problems found (theory building). The experimentation with the ASSESS-IT framework suggests that in order to portray the impact that IT may have on BP, analysts in these domains should first identify those performance specifications that describe how well the IS delivers its functionality (also known as non-functional requirements). It was found that when the IS does not depend on determined response time, the relationships between BP, IS and CN can be assessed using only the relationship between BP and IS. An alternative simulation framework, namely BPISS, is proposed to produce BPS models that provide performance measurements of BP and IS. Thus, BP and IT analysts can investigate the impact that a given IS design may have on BP performance, and identify a better BP and IS solution.
APA, Harvard, Vancouver, ISO, and other styles
3

Di, Domenica Nico. "Stochastic programming and scenario generation : decision modelling simulation and information systems perspective." Thesis, Brunel University, 2005. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.415936.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Wang, Qian. "Modelling and simulation of integrated operational and information processing systems in manufacturing." Thesis, University of Sussex, 2002. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.394898.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Hultberg, Ida. "Modelling and Simulation of Unknown Factors in Simulation Based Acquisition." Thesis, University of Skövde, Department of Computer Science, 2002. http://urn.kb.se/resolve?urn=urn:nbn:se:his:diva-715.

Full text
Abstract:

When a new product should be acquired, a model over its functionality is made. A quite new idea in the military area is to use simulations to find out what and how much to acquire. Since the product never has been on the market before it is hard to know how factors in the surroundings, like weather and other active objects, will affect it. Therefore these unknown factors that appear during the creation or acquiring of a new product need to be taken into consideration.

A literature study is performed about how modelling of simulations can be done, and how unknown factors can be considered when modelling a simulation. The study goes into if unknown factors are taken into consideration when modelling in the Process component in Simulation Based Acquisition (SBA). The result of this study shows that SBA facilitates in the process of finding and reducing unknown factors.

APA, Harvard, Vancouver, ISO, and other styles
6

Ghaffari, Abdolali. "Application of geographical information systems (GIS) and crop simulation modelling in sustainable agriculture." Thesis, Imperial College London, 2000. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.312108.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Ulriksson, Jenny. "Consistency management in collaborative modelling and simulation." Licentiate thesis, KTH, Microelectronics and Information Technology, IMIT, 2005. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-571.

Full text
Abstract:

The aim of this thesis is to exploit the technological capabilities of computer supported collaborative work (CSCW) in the field of collaborative Modelling and Simulation (M&S). The thesis focuses on addressing two main problems: (i) providing flexible means of consistency management in collaborative M&S, and (ii) the ability of providing platform and application independent services for collaborative M&S.

In this work, some CSCW technologies and how some of the concepts can be incorporated in a distributed collaborative M&S environment, have been studied. An environment for component based simulation development and visualization, which provides support for collaborative M&S, has been designed. Some consistency policies that can be used in conjunction with distributed simulation and the High Level Architecture (HLA) have been investigated. Furthermore, the efficient utilization of HLA and XML in combination, as the foundation of a CSCW infrastructure has been proved. Two consistency policies were implemented utilizing HLA, a strict and an optimistic, in the distributed collaborative environment. Their performance was compared to the performance of a totally relaxed policy, in various collaboration situations.

APA, Harvard, Vancouver, ISO, and other styles
8

Aramrattana, Maytheewat. "Modelling and Simulation for Evaluation of Cooperative Intelligent Transport System Functions." Licentiate thesis, Högskolan i Halmstad, Centrum för forskning om inbyggda system (CERES), 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:vti:diva-12683.

Full text
Abstract:
Future vehicles are expected to be equipped with wireless communication technology, that enables them to be “connected” to each others and road infrastructures. Complementing current autonomous vehicles and automated driving systems, the wireless communication allows the vehicles to interact, cooperate, and be aware of its surroundings beyond their own sensors’ range. Such sys- tems are often referred to as Cooperative Intelligent Transport Systems (C-ITS), which aims to provide extra safety, efficiency, and sustainability to transporta- tion systems. Several C-ITS applications are under development and will require thorough testing and evaluation before their deployment in the real-world. C- ITS depend on several sub-systems, which increase their complexity, and makes them difficult to evaluate. Simulations are often used to evaluate many different automotive applications, including C-ITS. Although they have been used extensively, simulation tools dedicated to determine all aspects of C-ITS are rare, especially human factors aspects, which are often ignored. The majority of the simulation tools for C-ITS rely heavily on different combinations of network and traffic simulators. The human factors issues have been covered in only a few C-ITS simulation tools, that involve a driving simulator. Therefore, in this thesis, a C-ITS simulation framework that combines driving, network, and traffic simulators is presented. The simulation framework is able to evaluate C-ITS applications from three perspectives; a) human driver; b) wireless communication; and c) traffic systems. Cooperative Adaptive Cruise Control (CACC) and its applications are chosen as the first set of C-ITS functions to be evaluated. Example scenarios from CACC and platoon merging applications are presented, and used as test cases for the simulation framework, as well as to elaborate potential usages of it. Moreover, approaches, results, and challenges from composing the simulation framework are presented and discussed. The results shows the usefulness of the proposed simulation framework.
APA, Harvard, Vancouver, ISO, and other styles
9

Kessels, Henricus. "Wildfire Management in the Southside Region of Canada’s Montane Cordillera - A Systems Modelling Application on Firebreak Strategies." Thesis, Université d'Ottawa / University of Ottawa, 2016. http://hdl.handle.net/10393/35107.

Full text
Abstract:
There is growing recognition of the importance of preserving Canada’s forests. Canada’s 348 million hectares of forest land cover 35% of its land area, representing 9% of the world’s forests and 24% of the world’s boreal forests. As a renewable resource, forests offer significant environmental, economic and recreational benefits and innumerable services contributing to the quality of life. Canada has recently entered an era of increased frequency and severity of natural disasters. Ecosystems and communities especially in western Canada have recently undergone a trend of increasing pressures from natural disturbances. These disturbances include wildfires associated with increased fuel load levels from past fire suppression regimes and a widely spread infestation of the mountain pine beetle in addition to changes in weather patterns. Wildfire activity has reached extreme levels in many of the recent years. This thesis profiles an area of western Canada within the Montane Cordillera covering the Nechako Lakes Electoral District in central British Columbia and assesses its vulnerability to the specific hazard of wildfires caused by natural and man-made sources. The objectives of this research are to review, simulate and assess the impact of various fuel management strategies in a sub-section of the Nechako Lakes Electoral District called the Southside. Values at risk include private property and old growth forest in respectively timber supply areas, provincial parks, woodlots and community forests. Simulation results show that firebreaks are effective in significantly reducing the area burned in different parts of the landscape. The performance of different strategies shows large variation. Although this has not been investigated further, such variation has likely been caused by topographic aspects and the positioning of firebreaks in the landscape in relation to climatic parameters. These results can therefore not be extrapolated beyond the simulated area, but do give an indication of the performance variation that may be expected when similar firebreaks are applied elsewhere. The results also show that model performance of all firebreak strategies is heavily and fairly consistently influenced by weather stream parameters. Sensitivity analyses of weather stream parameters show that although the reduction in total area burned varies, the ranking between strategies in their overall performance is consistent regardless of the weather pattern. Combined dry, warm and windy weather conditions lead to a 3.44-fold increase in total area burned as compared to the scenario with average weather conditions. In favourable weather conditions represented by wet, cold and nearly windless conditions, the model shows an 85% reduction in total burned area as compared to the average scenario. These results illustrate the significant impact of uncontrollable variables on the overall result.
APA, Harvard, Vancouver, ISO, and other styles
10

Gustafsson, Magnus. "Evaluation of StochSD for Epidemic Modelling, Simulation and Stochastic Analysis." Thesis, Uppsala universitet, Institutionen för informationsteknologi, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-426227.

Full text
Abstract:
Classical Continuous System Simulation (CSS) is restricted to modelling continuous flows, and therefore, cannot correctly realise a conceptual model with discrete objects. The development of Full Potential CSS solves this problem by (1) handling discrete quantities as discrete and continuous matter as continuous, (2) preserving the sojourn time distribution of a stage, (3) implementing attributes correctly, and (4) describing different types of uncertainties in a proper way. In order to apply Full Potential CSS a new software, StochSD, has been developed. This thesis evaluates StochSD's ability to model Full Potential CSS, where the points 1-4 above are included. As a test model a well-defined conceptual epidemic model, which includes all aspects of Full Potential CSS, was chosen. The study was performed by starting with a classical SIR model and then stepwise add the different aspects of the Conceptual Model. The effects of each step were demonstrated in terms of size and duration of the epidemic. Finally, the conceptual model was also realised as an Agent Based Model (ABM). The results from 10 000 replications each of the CSS and ABM models were compared and no statistical differences could be confirmed. The conclusion is that StochSD passed the evaluation.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Modelling and simulation in information systems"

1

Dräyer, Dietrich. GIS-gestützte Bodenerosionsmodellierung im Nordwestschweizerischen Tafeljura: Erosionsschadenskartierungen und Modellellergebnisse = GIS-based soil erosion modelling in NW-Switzerland : erosion damage mappings and modelling results. Basler: Wepf, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Vekerdy, Zoltán. Geographical information system based hydrological modelling of alluvial regions: Using the example of the Kisalföld (Hungary). Enschede, the Netherlands: International Institute for Aerospace Survey and Earth Sciences, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Landscape modelling: Geographical space, transformation and future scenarios. Dordrecht: Springer, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

B, Whinston Andrew, and Holsapple C. W, eds. Business modelling: Multidisciplinary approaches, economics, operational, and information systems perspectives : in honor of Andrew B. Whinston. Boston: Kluwer Academic Publishers, 2002.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

F, Abbott L., ed. Theoretical neuroscience: Computational and mathematical modeling of neural systems. Cambridge, Mass: Massachusetts Institute of Technology Press, 2001.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Andrew, Skidmore, ed. Environmental modelling with GIS and remote sensing. London: Taylor & Francis, 2002.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

ARIS design platform: Advanced process modelling and administration. London: Springer, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Kuflik, Tsvi. Advances in ubiquitous user modelling: Revised selected papers. Berlin: Springer, 2009.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Magnus, Nørgaard, ed. Neural networks for modelling and control of dynamic systems: A practitioner's handbook. Berlin: Springer, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Tregub, Ilona, and Tat'yana Goroshnikova. A simulation model of decision-making. ru: INFRA-M Academic Publishing LLC., 2020. http://dx.doi.org/10.12737/1030572.

Full text
Abstract:
A tutorial on the basics of simulation modelling in problems of managerial decision-making, illustrated by numerous practical examples. Contains material contributing to the deepening of theoretical knowledge and practical skills of the student in the application of computer simulation modeling of economic, social and technological systems for the formation, adoption and implementation of managerial decisions. Meets the requirements of Federal state educational standards of higher education of the last generation. Intended for graduate students in the study of disciplines "Mathematical and instrumental methods of decision support" (area of training 09.04.03 Applied Informatics, master's program "Applied information science in analytical Economics") and "simulation modeling of economic and information systems (advanced course)" (specialty 01.04.02 - "Applied mathematics and computer science", master program "Quantitative methods in Finance and Economics"). Will be useful to undergraduate students as well as middle managers and senior managers to understand the methods of computer modeling in support of decision making and developing them on the basis of sound management decisions.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Modelling and simulation in information systems"

1

Jahnen, Sebastian, and Stefan Pickl. "Information Exchange Diagrams for Information Systems and Artificial Intelligence in the Context of Decision Support Systems." In Modelling and Simulation for Autonomous Systems, 393–401. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-14984-0_28.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Litwiller, Steve, Matt Weber, and Frank Klucznik. "Improving Robotic and Autonomous Systems Information Interoperability." In Modelling and Simulation for Autonomous Systems, 24–39. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-22383-4_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Wagner, Gerd. "AOR Modelling and Simulation: Towards a General Architecture for Agent-Based Discrete Event Simulation." In Agent-Oriented Information Systems, 174–88. Berlin, Heidelberg: Springer Berlin Heidelberg, 2004. http://dx.doi.org/10.1007/978-3-540-25943-5_12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Hanne, Thomas, and Rolf Dornberger. "Computational Intelligence in Modelling, Simulation, Optimization, and Control." In Business Information Systems and Technology 4.0, 227–41. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-74322-6_15.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Kot, Tomáš, Petr Novák, Jan Babjak, and Petr Olivka. "Rendering of 3D Maps with Additional Information for Operator of a Coal Mine Mobile Robot." In Modelling and Simulation for Autonomous Systems, 214–25. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-47605-6_18.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Dubeň, Alexander, Robert Pěnička, and Martin Saska. "Information Gathering Planning with Hermite Spline Motion Primitives for Aerial Vehicles with Limited Time of Flight." In Modelling and Simulation for Autonomous Systems, 172–201. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-14984-0_15.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Nohel, Jan. "Possibilities of Raster Mathematical Algorithmic Models Utilization as an Information Support of Military Decision Making Process." In Modelling and Simulation for Autonomous Systems, 553–65. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-14984-0_41.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Spieß, Patrik, Dinh Khoa Nguyen, Ingo Weber, Ivan Markovic, and Michael Beigl. "Modelling, Simulation, and Performance Analysis of Business Processes Involving Ubiquitous Systems." In Advanced Information Systems Engineering, 579–82. Berlin, Heidelberg: Springer Berlin Heidelberg, 2008. http://dx.doi.org/10.1007/978-3-540-69534-9_44.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Ješke, Petr, Štěpán Klouček, and Martin Saska. "Autonomous Compact Monitoring of Large Areas Using Micro Aerial Vehicles with Limited Sensory Information and Computational Resources." In Modelling and Simulation for Autonomous Systems, 158–71. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-14984-0_14.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Hansman, R. John, James K. Kuchar, and Eric N. Johnson. "Human Centered Development of Information Systems and Decision Aids in Advanced Air Traffic Management Systems." In Modelling and Simulation in Air Traffic Management, 169–83. Berlin, Heidelberg: Springer Berlin Heidelberg, 1997. http://dx.doi.org/10.1007/978-3-642-60836-0_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Modelling and simulation in information systems"

1

Grusho, Alexander A., Elena E. Timonina, and Sergey Shorgin. "Modelling For Ensuring Information Security Of The Distributed Information Systems." In 31st Conference on Modelling and Simulation. ECMS, 2017. http://dx.doi.org/10.7148/2017-0656.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Masizana-Katongo, A. N., G. Anderson, D. Mpoeleng, T. Taukobong, G. Mosweunyane, O. T. Eyitayo, and B. Gopolang. "An SMS-based Healthcare Information Storage and Retrieval System." In Modelling and Simulation. Calgary,AB,Canada: ACTAPRESS, 2010. http://dx.doi.org/10.2316/p.2010.687-012.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Bolte, M. A. B. W., G. D. Meier, M. Najafi, and D. P. F. Möller. "Computation Of Spin-Wave Spectra Of Magnetic Nanostructures For Information Storage Systems." In 20th Conference on Modelling and Simulation. ECMS, 2006. http://dx.doi.org/10.7148/2006-0487.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Ivanov, Dmitry A., Boris V. Sokolov, and Evelio A. Dilou. "Integrated Planning Of Supply Chain Business Processes And Disaster-Tolerance Information Systems." In 25th Conference on Modelling and Simulation. ECMS, 2011. http://dx.doi.org/10.7148/2011-0159-0165.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Vachkov, G. "Fault Diagnosis of Complex Systems Based on Modular Knowledge Base and Information Compression." In 20th Conference on Modelling and Simulation. ECMS, 2006. http://dx.doi.org/10.7148/2006-0112.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

"[Publisher's information]." In 2016 International Conference on Systems Informatics, Modelling and Simulation (SIMS). IEEE, 2016. http://dx.doi.org/10.1109/sims.2016.31.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

"Publisher's Information." In 2010 International Conference on Intelligent Systems, Modelling and Simulation (ISMS). IEEE, 2010. http://dx.doi.org/10.1109/isms.2010.95.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Geetha, D. Evangelin, G. Krishna Naidu, T. V. Suresh Kumar, and K. Rajani Kanth. "Simulative Performance Evaluation of Information Retrieval Systems." In 2008 Second Asia International Conference on Modelling & Simulation (AMS). IEEE, 2008. http://dx.doi.org/10.1109/ams.2008.153.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Isiaq, Sakirulai O., Taha Osman, and Evtim Peytchev. "Managing Contextual Information in Semantically-Driven Temporal Information Systems." In 2011 UkSim 13th International Conference on Computer Modelling and Simulation (UKSim). IEEE, 2011. http://dx.doi.org/10.1109/uksim.2011.92.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Herawan, Tutut, and Mustafa Mat Deris. "Rough Set Theory for Topological Spaces in Information Systems." In 2009 Third Asia International Conference on Modelling & Simulation. IEEE, 2009. http://dx.doi.org/10.1109/ams.2009.135.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Modelling and simulation in information systems"

1

de Kemp, E. A., H. A. J. Russell, B. Brodaric, D. B. Snyder, M. J. Hillier, M. St-Onge, C. Harrison, et al. Initiating transformative geoscience practice at the Geological Survey of Canada: Canada in 3D. Natural Resources Canada/CMSS/Information Management, 2022. http://dx.doi.org/10.4095/331097.

Full text
Abstract:
Application of 3D technologies to the wide range of Geosciences knowledge domains is well underway. These have been operationalized in workflows of the hydrocarbon sector for a half-century, and now in mining for over two decades. In Geosciences, algorithms, structured workflows and data integration strategies can support compelling Earth models, however challenges remain to meet the standards of geological plausibility required for most geoscientific studies. There is also missing links in the institutional information infrastructure supporting operational multi-scale 3D data and model development. Canada in 3D (C3D) is a vision and road map for transforming the Geological Survey of Canada's (GSC) work practice by leveraging emerging 3D technologies. Primarily the transformation from 2D geological mapping, to a well-structured 3D modelling practice that is both data-driven and knowledge-driven. It is tempting to imagine that advanced 3D computational methods, coupled with Artificial Intelligence and Big Data tools will automate the bulk of this process. To effectively apply these methods there is a need, however, for data to be in a well-organized, classified, georeferenced (3D) format embedded with key information, such as spatial-temporal relations, and earth process knowledge. Another key challenge for C3D is the relative infancy of 3D geoscience technologies for geological inference and 3D modelling using sparse and heterogeneous regional geoscience information, while preserving the insights and expertise of geoscientists maintaining scientific integrity of digital products. In most geological surveys, there remains considerable educational and operational challenges to achieve this balance of digital automation and expert knowledge. Emerging from the last two decades of research are more efficient workflows, transitioning from cumbersome, explicit (manual) to reproducible implicit semi-automated methods. They are characterized by integrated and iterative, forward and reverse geophysical modelling, coupled with stratigraphic and structural approaches. The full impact of research and development with these 3D tools, geophysical-geological integration and simulation approaches is perhaps unpredictable, but the expectation is that they will produce predictive, instructive models of Canada's geology that will be used to educate, prioritize and influence sustainable policy for stewarding our natural resources. On the horizon are 3D geological modelling methods spanning the gulf between local and frontier or green-fields, as well as deep crustal characterization. These are key components of mineral systems understanding, integrated and coupled hydrological modelling and energy transition applications, e.g. carbon sequestration, in-situ hydrogen mining, and geothermal exploration. Presented are some case study examples at a range of scales from our efforts in C3D.
APA, Harvard, Vancouver, ISO, and other styles
2

Fikus, John. Global Information Enterprise Simulation (GIESIM) Joint Tactical Information Distribution Systems Simulation Experimentation. Fort Belvoir, VA: Defense Technical Information Center, August 2005. http://dx.doi.org/10.21236/ada438999.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Mayk, Israel. Simulation & C2 Information Systems Connectivity Experiments (SINCE). Fort Belvoir, VA: Defense Technical Information Center, January 2003. http://dx.doi.org/10.21236/ada462274.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Rabiti, C., A. Epiney, P. Talbot, J. S. Kim, S. Bragg-Sitton, A. Alfonsi, A. Yigitoglu, et al. Status Report on Modelling and Simulation Capabilities for Nuclear-Renewable Hybrid Energy Systems. Office of Scientific and Technical Information (OSTI), September 2017. http://dx.doi.org/10.2172/1408526.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Gaydarski, Ivan, and Zlatogor Minchev. Modelling, Analysis, Experimental Validation and Verification of Information Security Systems in Corporate Environment. Procon, Ltd, 2019. http://dx.doi.org/10.11610/it4sec.0132.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Moitra, Soumyo D., and Suresh L. Konda. A Simulation Model for Managing Survivability of Networked Information Systems. Fort Belvoir, VA: Defense Technical Information Center, December 2000. http://dx.doi.org/10.21236/ada387453.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Sanz, Asier`. Numerical simulation tools for PVT collectors and systems. IEA SHC Task 60, September 2020. http://dx.doi.org/10.18777/ieashc-task60-2020-0006.

Full text
Abstract:
The computer-based experimentation covers almost the entire activity chain of the PVT sector. The PVT community carries out very different kind of modelling and simulation labours in order to answer to very diverse needs, such as proof-of-concepts, research, design, sizing, controlling, optimization, validation, marketing, sales, O&M, etc.
APA, Harvard, Vancouver, ISO, and other styles
8

McGarrigle, M. Embedding Building Information Modelling into Construction Technology and Documentation Courses. Unitec ePress, November 2014. http://dx.doi.org/10.34074/rsrp.005.

Full text
Abstract:
The aim of this research is to generate a resource to assist construction lecturers in identifying opportunities where Building Information Modelling [BIM] could be employed to augment the delivery of subject content within individual courses on construction technology programmes. The methodology involved a detailed analysis of the learning objectives and underpinning knowledge of the course content by topic area, within the residential Construction Systems 1 course presently delivered at Unitec on the National Diplomas in Architectural Technology[NDAT], Construction Management [NDCM] and Quantity Surveying [NDQS]. The objective is to aid students’ understanding of specific aspects such as planning controls or sub-floor framing by using BIM models, and investigate how these could enhance delivery modes using image,animation and interactive student activity. A framework maps the BIM teaching opportunities against each topic area highlighting where these could be embedded into construction course delivery. This template also records software options and could be used in similar analyses of other courses within similar programmes to assist with embedding BIM in subject delivery.
APA, Harvard, Vancouver, ISO, and other styles
9

McGarrigle, M. Embedding Building Information Modelling into Construction Technology and Documentation Courses. Unitec ePress, November 2014. http://dx.doi.org/10.34074/rsrp.005.

Full text
Abstract:
The aim of this research is to generate a resource to assist construction lecturers in identifying opportunities where Building Information Modelling [BIM] could be employed to augment the delivery of subject content within individual courses on construction technology programmes. The methodology involved a detailed analysis of the learning objectives and underpinning knowledge of the course content by topic area, within the residential Construction Systems 1 course presently delivered at Unitec on the National Diplomas in Architectural Technology[NDAT], Construction Management [NDCM] and Quantity Surveying [NDQS]. The objective is to aid students’ understanding of specific aspects such as planning controls or sub-floor framing by using BIM models, and investigate how these could enhance delivery modes using image,animation and interactive student activity. A framework maps the BIM teaching opportunities against each topic area highlighting where these could be embedded into construction course delivery. This template also records software options and could be used in similar analyses of other courses within similar programmes to assist with embedding BIM in subject delivery.
APA, Harvard, Vancouver, ISO, and other styles
10

Fujimoto, Richard, Michael Hunter, and Haesun Park. Dynamic Systems for Individual Tracking via Heterogeneous Information Integration and Crowd Source Distributed Simulation. Fort Belvoir, VA: Defense Technical Information Center, December 2015. http://dx.doi.org/10.21236/ad1004753.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Modelling and simulation in information systems' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography