Journal articles on the topic 'Mineral Processing'

To see the other types of publications on this topic, follow the link: Mineral Processing.

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Mineral Processing.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Chanturiya, Valentine A., and Igor Zh Bunin. "Advances in Pulsed Power Mineral Processing Technologies." Minerals 12, no. 9 (September 19, 2022): 1177. http://dx.doi.org/10.3390/min12091177.

Full text
APA, Harvard, Vancouver, ISO, and other styles
Abstract:
In Russia and globally, pulsed power technologies have been proposed based on the conversion of energy into a short-pulsed form and exposing geomaterials (minerals, rocks, and ores) to strictly dosed high-power pulsed electric and magnetic fields, beams of charged particles, microwave radiation, neutrons and X-ray quanta, and low-temperature plasma flows. Such pulsed energy impacts are promising methods for the pretreatment of refractory mineral feeds (refractory ores and concentration products) to increase the disintegration, softening, and liberation performance of finely disseminated mineral complexes, as well as the contrast between the physicochemical and process properties of mineral components. In this paper, we briefly review the scientific foundations of the effect of both high-power nanosecond electromagnetic pulses (HPEMP) and dielectric barrier discharge (DBD) in air on semiconductor ore minerals (sulfides, rare metals minerals) and rock-forming dielectric minerals. The underlying mechanisms of mineral intergrowth disintegration and changes in the structural and chemical states of the mineral surface when exposed to HPEMP and DBD irradiation are discussed. The high performance and potential limitations of pulsed energy impact and low-temperature plasma produced by DBD treatment of geomaterials are discussed in terms of the directional change in the process properties of the minerals to improve the concentration performance of refractory minerals and ores.
2

Adorjan, L. A. "Mineral Processing Innovations." Canadian Metallurgical Quarterly 24, no. 1 (January 1985): 15–25. http://dx.doi.org/10.1179/cmq.1985.24.1.15.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Apling, Alan. "Mineral processing technology." Corrosion Science 36, no. 4 (April 1994): 743–44. http://dx.doi.org/10.1016/0010-938x(94)90078-7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Mikhlin, Yuri. "X-ray Photoelectron Spectroscopy in Mineral Processing Studies." Applied Sciences 10, no. 15 (July 26, 2020): 5138. http://dx.doi.org/10.3390/app10155138.

Full text
APA, Harvard, Vancouver, ISO, and other styles
Abstract:
Surface phenomena play the crucial role in the behavior of sulfide minerals in mineral processing of base and precious metal ores, including flotation, leaching, and environmental concerns. X-ray photoelectron spectroscopy (XPS) is the main experimental technique for surface characterization at present. However, there exist a number of problems related with complex composition of natural mineral systems, and instability of surface species and mineral/aqueous phase interfaces in the spectrometer vacuum. This overview describes contemporary XPS methods in terms of categorization and quantitative analysis of oxidation products, adsorbates and non-stoichiometric layers of sulfide phases, depth and lateral spatial resolution for minerals and ores under conditions related to mineral processing and hydrometallurgy. Specific practices allowing to preserve volatile species, e.g., elemental sulfur, polysulfide anions and flotation collectors, as well as solid/liquid interfaces are surveyed; in particular, the prospects of ambient pressure XPS and cryo-XPS of fast-frozen wet mineral pastes are discussed. It is also emphasized that further insights into the surface characteristics of individual minerals in technological slurries need new protocols of sample preparation in conjunction with high spatial resolution photoelectron spectroscopy that is still unavailable or unutilized in practice.
5

Yvon, Jacques, Philippe Marion, Laurent Michot, Frédéric Villieras, Friedrich Ernst Wagner, and Jοspeh Friedl. "Development of mineralogy applications in mineral processing." European Journal of Mineralogy 3, no. 4 (August 27, 1991): 667–76. http://dx.doi.org/10.1127/ejm/3/4/0667.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Han, Xiu Li, Chang Cun Li, and Li Na Liu. "Study on Processing Mineralogy of Xuanhua Iron Ore." Applied Mechanics and Materials 50-51 (February 2011): 751–55. http://dx.doi.org/10.4028/www.scientific.net/amm.50-51.751.

Full text
APA, Harvard, Vancouver, ISO, and other styles
Abstract:
The chemical component, mineral composition and dissemination characteristics of Xuanhua iron ore are researched systematically. The result shows that: the iron ore mainly is oolitic structure and colloform, xenomorphic granular texture, the mineral composition is complex, the primary metallic minerals is hematite, and the rocky minerals mainly is quartz, followed by carbonate, epidote, chlorite, and amphibole. The diffraction size of hematite and rocky minerals is fine. It is difficult to liberate between hematite and rocky minerals and easy to be mud. The iron ore is very hard to separate, and it can be used in the process of stage grinding and concentration.
7

Pham, Luan Van. "Challenges and opportunities for development of the Vietnam mineral processing in the XXI century." Journal of Mining and Earth Sciences 62, no. 3b (July 20, 2021): 1–8. http://dx.doi.org/10.46326/jmes.2021.62(3b).01.

Full text
APA, Harvard, Vancouver, ISO, and other styles
Abstract:
Mineral mining and processing Industry of Vietnam is facing a number of huge challenges at present, but there are also great opportunities for its growth in the future. Mineral processing plants need to make breakthrough improvements in the process designing, technology and equipment utilisation in order to meet requirements of the new era. These challenges force our miners and mineral processing operators to constantly make efforts in researches and to bring best solutions to improve plant operations to ensure the requirements of safety, market demands, product quality, sustainable development and environmental friendliness. Specifically, the issues that need to be addressed urgently are capacity and quality of the workforce, tailings treatment, fine particle processing, ores of low washability, recovery rate increase and maximisation of recoverable valuable minerals, environmental issues and workplace safety monitoring and control, maximasation of production efficiency and reduction of operating costs. This report presents the current key challenges of the mining and mineral processing industry in order to help professionals and policy makers in the field of mineral mining and processing to bring rational directions for action initiate appropriate studies and improve management methods; to help mineral processing plants in improving the production efficiency and recovery of valuable minerals; to reduce operating costs and to become environmentally friendly and to develop sustainably.
8

Herbst, John A., and Donghong Gao. "Mining and mineral processing." International Journal of Computational Fluid Dynamics 23, no. 2 (February 2009): 79–80. http://dx.doi.org/10.1080/10618560902811450.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Attia, Y. A. "Challenges in mineral processing." International Journal of Mineral Processing 31, no. 1-2 (April 1991): 146–47. http://dx.doi.org/10.1016/0301-7516(91)90012-8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Wills, B. A. "Challenges in mineral processing." Minerals Engineering 2, no. 3 (January 1989): 431–34. http://dx.doi.org/10.1016/0892-6875(89)90012-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
11

Deng, Jiushuai, and Hongxiang Xu. "Discussion on the Teaching of “Metallic Mineral Processing” for Mineral Processing Engineering." Journal of Contemporary Educational Research 6, no. 11 (November 17, 2022): 23–27. http://dx.doi.org/10.26689/jcer.v6i11.4485.

Full text
APA, Harvard, Vancouver, ISO, and other styles
Abstract:
Social economic growth and the increasing demand for mineral resources have promoted the development of metallic mineral processing technology. Therefore, in order to satisfy the demands for development in mining, cultivating comprehensive mineral processing engineering professionals with strong innovative practical skills has become the top priority in current education. We have established a new course, “Metallic Mineral Processing,” for students majoring in mineral processing engineering in universities, with coal and other sources of energy as the main focus. This paper analyzes the purpose and significance of setting up this course and the exploration of the reform of the teaching mode, with the aim of improving the teaching quality and ensuring the cultivation of mineral processing engineering undergraduates.
12

Song, Shaoxian. "Dry mineral processing: the new topic of XXXII international mineral processing congress." Minerals and Mineral Materials 2, no. 1 (2023): 2. http://dx.doi.org/10.20517/mmm.2023.01.

Full text
APA, Harvard, Vancouver, ISO, and other styles
13

Ndlovu, Bulelwa, Saeed Farrokhpay, and Dee Bradshaw. "The effect of phyllosilicate minerals on mineral processing industry." International Journal of Mineral Processing 125 (December 2013): 149–56. http://dx.doi.org/10.1016/j.minpro.2013.09.011.

Full text
APA, Harvard, Vancouver, ISO, and other styles
14

Okada, Natsuo, Yohei Maekawa, Narihiro Owada, Kazutoshi Haga, Atsushi Shibayama, and Youhei Kawamura. "Automated Identification of Mineral Types and Grain Size Using Hyperspectral Imaging and Deep Learning for Mineral Processing." Minerals 10, no. 9 (September 13, 2020): 809. http://dx.doi.org/10.3390/min10090809.

Full text
APA, Harvard, Vancouver, ISO, and other styles
Abstract:
In mining operations, an ore is separated into its constituents through mineral processing methods, such as flotation. Identifying the type of minerals contained in the ore in advance aids greatly in performing faster and more efficient mineral processing. The human eye can recognize visual information in three wavelength regions: red, green, and blue. With hyperspectral imaging, high resolution spectral data that contains information from the visible light wavelength region to the near infrared region can be obtained. Using deep learning, the features of the hyperspectral data can be extracted and learned, and the spectral pattern that is unique to each mineral can be identified and analyzed. In this paper, we propose an automatic mineral identification system that can identify mineral types before the mineral processing stage by combining hyperspectral imaging and deep learning. By using this technique, it is possible to quickly identify the types of minerals contained in rocks using a non-destructive method. As a result of experimentation, the identification accuracy of the minerals that underwent deep learning on the red, green, and blue (RGB) image of the mineral was approximately 30%, while the result of the hyperspectral data analysis using deep learning identified the mineral species with a high accuracy of over 90%.
15

Machado, AfrânioFranco. "Mineral technology and mineral processing & hydrometallurgy meetings." Filtration & Separation 30, no. 2 (March 1993): 123–25. http://dx.doi.org/10.1016/0015-1882(93)80099-i.

Full text
APA, Harvard, Vancouver, ISO, and other styles
16

Kholoshyn, Ihor, Natalia Panteleeva, Oleksandr Trunin, Liudmyla Burman, and Olga Kalinichenko. "Infrared spectroscopy as the method for evaluating technological properties of minerals and their behavior in technological processes." E3S Web of Conferences 166 (2020): 02002. http://dx.doi.org/10.1051/e3sconf/202016602002.

Full text
APA, Harvard, Vancouver, ISO, and other styles
Abstract:
Infrared spectroscopy (IR) is a highly effective method for the analysis of minerals, rocks and ores, capable of solving a whole range of problems when choosing innovative solutions for the technological processing of various types of mineral raw materials. The article considers the main directions of using the infrared spectroscopy method in assessing the technological properties of minerals and their behavior in technological processes: evaluation of the grade (quality) of mineral raw materials; analysis of the behavior of minerals in the technological process with prediction of their technological properties; analysis of changes in the structure and properties of minerals in technological processes; operational analysis of mineral substances at various stages of technological processing. The article illustrates all aspects of the use of infrared spectroscopy at various stages of studying the material composition of mineral raw materials in its enrichment assessment by specific examples of solving problems arising from the technological redistribution of various types of ore and non-metallic minerals.
17

CHEN, Jian-ming, Run-qing LIU, Wei SUN, and Guan-zhou QIU. "Effect of mineral processing wastewater on flotation of sulfide minerals." Transactions of Nonferrous Metals Society of China 19, no. 2 (April 2009): 454–57. http://dx.doi.org/10.1016/s1003-6326(08)60294-0.

Full text
APA, Harvard, Vancouver, ISO, and other styles
18

Syvyj, M. "Issue of the rational mineral resources usage of the region." Visnyk of the Lviv University. Series Geography, no. 37 (September 9, 2009): 65–75. http://dx.doi.org/10.30970/vgg.2009.37.2373.

Full text
APA, Harvard, Vancouver, ISO, and other styles
Abstract:
Questions of the rational depths use and guard in the context of rational nature management in the districts of intensive mineral raw resources booty and processing were considered. Key words: mineral raw resources, minerals, mining wastes, rational use, mineral raw resources cadastre.
19

Khat’kova, A. N., L. G. Nikitina, S. A. Pateyuk, and V. G. Cherkasov. "Borogypsum: mineral composition, processing technology." Vestnik of Geosciences 3 (2020): 22–27. http://dx.doi.org/10.19110/geov.2020.3.3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
20

Pomykała, Radosław, and Barbara Tora. "Circular Economy in Mineral Processing." E3S Web of Conferences 18 (2017): 01024. http://dx.doi.org/10.1051/e3sconf/20171801024.

Full text
APA, Harvard, Vancouver, ISO, and other styles
Abstract:
The paper aims to implementation of Circular Economy in mineral processing in Poland. Circular economy represents a completely new approach to product life cycle, based on the departure from the linear model of “take – make – dispose” and turning to the circular or closed-circle model of economy. Challenges and opportunities of implementation of Circular Economy in Mining is presented. The VERAM project, financed by The European Union (by the EUR 1.4 million) to the project is described. The examples of good practice in the area of implementation of circular economy in Poland is presented (Tauron Wydobycie - wasteless mine and ZGH Bolesław - waste management)
21

ROSENKRANZ, Jan, and Pertti LAMBERG. "Sustainable Processing of Mineral Resources." International Journal of the Society of Materials Engineering for Resources 20, no. 1 (2014): 17–22. http://dx.doi.org/10.5188/ijsmer.20.17.

Full text
APA, Harvard, Vancouver, ISO, and other styles
22

Pomykała, Radosław, and Barbara Tora. "Circular Economy in Mineral Processing." E3S Web of Conferences 18 (2017): 01024. http://dx.doi.org/10.1051/e3sconf/201712301024.

Full text
APA, Harvard, Vancouver, ISO, and other styles
23

OGWUEGBU, MARTIN ONWU CHIDOZIE, and FRED CHILESHE. "Coordination Chemistry in Mineral Processing." Mineral Processing and Extractive Metallurgy Review 21, no. 6 (October 2000): 497–525. http://dx.doi.org/10.1080/08827500008914176.

Full text
APA, Harvard, Vancouver, ISO, and other styles
24

TIKHONOV, OLEG N. "Separational Characteristics of Mineral Processing." Mineral Processing and Extractive Metallurgy Review 2, no. 1-2 (October 1985): 105–34. http://dx.doi.org/10.1080/08827508508952602.

Full text
APA, Harvard, Vancouver, ISO, and other styles
25

GUILLANEAU, J. C., J. VILLENEUVE, M. V. DURANCE, S. BROCHOT, and G. FOURNIGUET. "Simulation Improvements in Mineral Processing." Mineral Processing and Extractive Metallurgy Review 15, no. 1-4 (December 1995): 205–16. http://dx.doi.org/10.1080/08827509508914199.

Full text
APA, Harvard, Vancouver, ISO, and other styles
26

Laznicka, Peter. "Mineral Deposits: Processes to Processing." Ore Geology Reviews 17, no. 1-2 (September 2000): 139–40. http://dx.doi.org/10.1016/s0169-1368(00)00005-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
27

Siriluck, Siwarote. "Bio Mineral Processing." Journal of King Mongkut's University of Technology North Bangkok, November 10, 2017. http://dx.doi.org/10.14416/j.kmutnb.2017.11.007.

Full text
APA, Harvard, Vancouver, ISO, and other styles
28

"Recent mineral processing publications." Minerals Engineering 9, no. 4 (April 1996): 487–88. http://dx.doi.org/10.1016/s0892-6875(96)90004-7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
29

"Recent mineral processing publications." Minerals Engineering 9, no. 10 (October 1996): 1099–103. http://dx.doi.org/10.1016/s0892-6875(96)90020-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
30

"Recent mineral processing publications." Minerals Engineering 9, no. 5 (May 1996): 599–602. http://dx.doi.org/10.1016/s0892-6875(96)90031-x.

Full text
APA, Harvard, Vancouver, ISO, and other styles
31

"Recent mineral processing publications." Minerals Engineering 9, no. 3 (March 1996): 378–82. http://dx.doi.org/10.1016/s0892-6875(96)90040-0.

Full text
APA, Harvard, Vancouver, ISO, and other styles
32

"Recent mineral processing publications." Minerals Engineering 9, no. 9 (September 1996): 1015–16. http://dx.doi.org/10.1016/s0892-6875(96)90067-9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
33

"Recent mineral processing publications." Minerals Engineering 9, no. 6 (June 1996): 705–6. http://dx.doi.org/10.1016/s0892-6875(96)90072-2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
34

"Recent mineral processing publications." Minerals Engineering 9, no. 1 (January 1996): 147–56. http://dx.doi.org/10.1016/s0892-6875(96)90078-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
35

"Recent mineral processing publications." Minerals Engineering 9, no. 7 (July 1996): 791–96. http://dx.doi.org/10.1016/s0892-6875(96)90088-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
36

"Recent mineral processing publications." Minerals Engineering 9, no. 12 (December 1996): 1283–85. http://dx.doi.org/10.1016/s0892-6875(96)90103-x.

Full text
APA, Harvard, Vancouver, ISO, and other styles
37

"Recent mineral processing publications." Minerals Engineering 9, no. 11 (November 1996): 1177–79. http://dx.doi.org/10.1016/s0892-6875(96)90143-0.

Full text
APA, Harvard, Vancouver, ISO, and other styles
38

"Recent mineral processing publications." Minerals Engineering 10, no. 8 (August 1997): 889–93. http://dx.doi.org/10.1016/s0892-6875(97)00068-x.

Full text
APA, Harvard, Vancouver, ISO, and other styles
39

"Mineral processing tailings disposal." Minerals Engineering 11, no. 3 (March 1998): 305. http://dx.doi.org/10.1016/s0892-6875(97)83561-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
40

"Recent mineral processing publications." Minerals Engineering 10, no. 12 (December 1997): 1439–43. http://dx.doi.org/10.1016/s0892-6875(97)90043-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
41

"Recent mineral processing publications." Minerals Engineering 10, no. 6 (June 1997): 647–49. http://dx.doi.org/10.1016/s0892-6875(97)90044-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
42

"Recent mineral processing publications." Minerals Engineering 10, no. 10 (October 1997): 1189–92. http://dx.doi.org/10.1016/s0892-6875(97)90089-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
43

"Recent mineral processing publications." Minerals Engineering 10, no. 2 (February 1997): 249–54. http://dx.doi.org/10.1016/s0892-6875(97)90143-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
44

"Recent mineral processing publications." Minerals Engineering 10, no. 4 (April 1997): 457–59. http://dx.doi.org/10.1016/s0892-6875(97)90205-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
45

"Recent mineral processing publications." Minerals Engineering 10, no. 1 (January 1997): 125–26. http://dx.doi.org/10.1016/s0892-6875(97)90239-9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
46

"Recent mineral processing publications." Minerals Engineering 11, no. 6 (June 1998): 589–94. http://dx.doi.org/10.1016/s0892-6875(98)90023-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
47

"Recent mineral processing publications." Minerals Engineering 11, no. 1 (January 1998): 91–112. http://dx.doi.org/10.1016/s0892-6875(98)90039-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
48

"Recent mineral processing publications." Minerals Engineering 11, no. 7 (July 1998): 677–81. http://dx.doi.org/10.1016/s0892-6875(98)90053-x.

Full text
APA, Harvard, Vancouver, ISO, and other styles
49

"Recent mineral processing publications." Minerals Engineering 11, no. 9 (September 1998): 881–90. http://dx.doi.org/10.1016/s0892-6875(98)90055-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
50

"Recent mineral processing publications." Minerals Engineering 11, no. 12 (December 1998): 1237–39. http://dx.doi.org/10.1016/s0892-6875(98)90058-9.

Full text
APA, Harvard, Vancouver, ISO, and other styles

To the bibliography