Academic literature on the topic 'Microwave regeneration'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Microwave regeneration.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "Microwave regeneration"
Wang, Shu Hui, Meng Xu, and Ming Guo Yu. "Effect of Rotary Partition DPF Structure on its Regeneration Characteristics with Microwave." Applied Mechanics and Materials 556-562 (May 2014): 1013–16. http://dx.doi.org/10.4028/www.scientific.net/amm.556-562.1013.
Full textFeng, Quan Li, Chen Xu Wang, Xue Qian Wang, and Ping Ning. "Regeneration of Activated Carbon Fiber Using Microwave under Vacuum Condition." Applied Mechanics and Materials 373-375 (August 2013): 2019–23. http://dx.doi.org/10.4028/www.scientific.net/amm.373-375.2019.
Full textWang, Chen Xu, Xue Qian Wang, Ping Ning, and Quan Li Feng. "Regeneration of Activated Carbon Fiber by Microwave under Nitrogen Condition." Applied Mechanics and Materials 373-375 (August 2013): 2024–29. http://dx.doi.org/10.4028/www.scientific.net/amm.373-375.2024.
Full textGrygierzec, Beata, Krzysztof Słowiński, Stanisław Mazur, Sylwester Tabor, Angelika Kliszcz, Agnieszka Synowiec, Dariusz Roman Ropek, and Lidia Luty. "Condition of Young Japanese Knotweed (Reynoutria japonica Houtt.) Offshoots in Response to Microwave Radiation of Their Rhizomes." Agronomy 13, no. 11 (November 18, 2023): 2838. http://dx.doi.org/10.3390/agronomy13112838.
Full textYang, Dong, and Xin Du. "A review about microwave regeneration technology of waste activated carbon." IOP Conference Series: Earth and Environmental Science 983, no. 1 (February 1, 2022): 012101. http://dx.doi.org/10.1088/1755-1315/983/1/012101.
Full textWang, Yu, Pan Han, Jie Yang, Ya Li Liu, and Run Ping Han. "Reuse of Spent Natural Zeolite for Methylene Blue Adsorption by Microwave Irradiation." Advanced Materials Research 233-235 (May 2011): 2019–22. http://dx.doi.org/10.4028/www.scientific.net/amr.233-235.2019.
Full textLuciano, Giorgio, Maurizio Vignolo, Denise Galante, Cristina D’Arrigo, Franco Furlani, Monica Montesi, and Silvia Panseri. "Designing and Manufacturing of Biocompatible Hydroxyapatite and Sodium Trisilicate Scaffolds by Ordinary Domestic Microwave Oven." Compounds 4, no. 1 (January 30, 2024): 106–18. http://dx.doi.org/10.3390/compounds4010005.
Full textLee, Chang Chuan, Noboru Yoshikawa, and Shoji Taniguchi. "Porous Glass Composite as Diesel Particulate Filter and the Microwave Regeneration." Advanced Materials Research 936 (June 2014): 2050–53. http://dx.doi.org/10.4028/www.scientific.net/amr.936.2050.
Full textKarimifard, Shahab, and Mohammad Reza Alavi Moghaddam. "The effects of microwave regeneration on adsorptive performance of functionalized carbon nanotubes." Water Science and Technology 73, no. 11 (March 5, 2016): 2638–43. http://dx.doi.org/10.2166/wst.2016.117.
Full textBogdanov, Todor, Plamena Marinova, Lubomir Traikov, Pavlina Gateva, Theophil Sedloev, Andrey Petrov, Vlayko Vodenicharov, et al. "The Effect of Low-Temperature Microwave Plasma on Wound Regeneration in Diabetic Rats." Processes 11, no. 12 (December 10, 2023): 3399. http://dx.doi.org/10.3390/pr11123399.
Full textDissertations / Theses on the topic "Microwave regeneration"
Zhang, Ye. "Perovskite coatings in microwave-assisted soot filter regeneration." [S.l. : Amsterdam : s.n.] ; Universiteit van Amsterdam [Host], 2004. http://dare.uva.nl/document/75469.
Full textPopuri, Sriram. "An experimental and computational investigation of microwave regeneration of diesel particulate traps." Morgantown, W. Va. : [West Virginia University Libraries], 1999. http://etd.wvu.edu/templates/showETD.cfm?recnum=987.
Full textTitle from document title page. Document formatted into pages; contains xxvi, 293 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 252-263).
Hajj, Ali. "Coupling microwaves with a CO2 desorption process from amine solvent : experimental and modeling approaches." Electronic Thesis or Diss., Ecole nationale supérieure Mines-Télécom Atlantique Bretagne Pays de la Loire, 2024. http://www.theses.fr/2024IMTA0412.
Full textAs global energy needs will continue to be met by fossil-fuel based sources, a viable solution to reduce CO2 emissions would be to implement carbon capture technologies. CO2 capture by absorption in amine solvents ranks among the most advanced technologies to be implemented on post combustion units. Still, its application is remains constrained large point sources with small sources remaining difficult to decarbonize. Recently, microwave heating has gained in popularity due to its characteristics of selectiveness, volumetric nature, and ease of control; on the other hand, membrane contactors are promising gas-liquid contactors due to their compacity, operational flexibility, and ease scalability in comparison to packed columns. In this work we explore the operation of chemical desorption when a hollow fiber membrane contactor by microwave heating.A comprehensive understanding of the interactions of microwave fields and transfer phenomena is essential for the correct design, operation, and optimization of an industrial scale equipment. Hence CO2 desorption rates were experimentally studied at the local scale of a single millimetric fiber, placed in a mono-mode microwave cavity. Numerical modeling of the fiber allowed the visualization of the temperature gradients formed inside the solvent, and the corresponding local desorption rates. In parallel, a prototype-scale unit was designed for the desorption of CO2 at the scale of a hollow fiber module under microwave fields. To this end we designed a custom-design cavity was made to house a membrane module in such a manner that CO2 desorption would take place simultaneously with electromagnetic heating
Shanks, David. "Design, Synthesis and Evaluation of Catalytic Chalcogenide Antioxidants." Doctoral thesis, Uppsala : Acta Universitatis Upsaliensis, 2005. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-6164.
Full textClem, William Charles. "Mesenchymal stem cell interaction with nanonstructured biomaterials for orthopaedic applications." Birmingham, Ala. : University of Alabama at Birmingham, 2008. https://www.mhsl.uab.edu/dt/2009r/clem.pdf.
Full textAdditional advisors: Yogesh K. Vohra, Xu Feng, Jack E. Lemons, Timothy M. Wick. Description based on contents viewed July 8, 2009; title from PDF t.p. Includes bibliographical references.
Liao, Chih-Kuo, and 廖志國. "Influence of Operating Parameters on Regeneration Efficiency and Reaction Products for Microwave Activated Carbon Regeneration Process." Thesis, 1999. http://ndltd.ncl.edu.tw/handle/39153899308079946924.
Full text國立中山大學
環境工程研究所
87
The objective of this study was to investigate the regeneration of activated carbon by microwave heating process. The multi-component adsorption of both benzene and toluene by spherical activated carbon (SAC) was tested in the research. The regeneration efficiencies of SAC under different experimental parameters included different types of carrier gases (air and nitrogen), carrier flow rates (2.0-10.0 l/min), microwave output power (350-700 W), and regeneration times (0-5 mins). The compositions of flue gas during regeneration were also identified and quantified in the investigation. Experimental results indicated that the decrease in regeneration efficiencies for SAC was detected in the experimental conditions of lower carrier gas flow rates, higher microwave output power, and air as carrier gas. The experimental results were also showed that the SAC pore size was increased and specific surface area was decreased after heating with microwave, which also resulted in the regeneration efficiencies less than 100%. The identified compositions in the flue gas included benzene, toluene, CH4, CO, and CO2. Both benzene and toluene were two major reaction products among these compounds, and the rest compounds mainly resulted from the decomposition of benzene or toluene and oxidation of carbon. The carbon balance for the investigation can be reached up to 90%. Higher concentrations of CH4, CO, and CO2 were observed in the experimental conditions of higher oxygen content in the carrier gas, lower carrier gas flow rates, and greater provided microwave energy. This research provided an innovative process for carbon regeneration.
Chen, Heng. "Microwave heating for adsorbents regeneration and oil sands coke activation." Master's thesis, 2010. http://hdl.handle.net/10048/1422.
Full textEnvironmental Engineering
Yang, Pei-Jung, and 楊斾蓉. "Regeneration and adsorption efficiency of waste activated carbon by microwave treatment." Thesis, 2015. http://ndltd.ncl.edu.tw/handle/17807269680926051234.
Full text國立臺灣大學
環境工程學研究所
103
Activated carbons (AC) have been used widely in the water and wastewater treatment and water reclamation plant. Since the benefit/cost of AC has been considered, the regeneration of AC has played an important role both in the treatment process and the cost reducing. Comparing to traditional regeneration methods, the advantages of microwave radiation process include shorter regeneration time, better efficiency, lower cost, less carbon loss, lower energy consumption, and without secondary pollution and specificity of the adsorbate. The objectives of this study were to regenerate the waste AC, which have been regenerated twice, sampled from water purification plant in Kinmen. The microwave radiation process was used as the regeneration method. Physical and chemical characteristics of regenerated AC were investigated. The diffraction intensity of regenerated AC was determined by XRD, structure changes were observed by SEM, and the specific surface area was analyzed by BET. The adsorption efficiencies of waste and regenerated AC under different operation parameters, such as radiation power, adsorption time, and temperature were investigated by iodine number. The iodine number of waste AC in Kinmen is approximately 450mg/gAC. With 20 mins radiation and power of 100 to 750W, the iodine number of regeneration GAC can all reach more than 800mg/gAC and the regeneration PAC can all reach more than 1050mg/gAC with 10 mins radiation and power of 450W.The iodine number will decrease with power higher than 850W resulted from carbon structure ruined. With using microwave radiation, not only the adsorption efficiency of regeneration AC is two times better than that of original waste AC, but also reducing the AC costs in Kinmenwater purification plant. Therefore, the microwave radiation process hasgreat potential for regeneration of waste AC.
Lee, Shu-fen, and 李淑芬. "Study on microwave-induced regeneration of activated carbon staurated with denudation wastewater from CD plate recycling process." Thesis, 2007. http://ndltd.ncl.edu.tw/handle/28654324350645036510.
Full text大仁科技大學
環境管理研究所
95
In this study, a denudation wastewater from CD plate recycling process was diluted in concentrations of 100 mg-COD/L as adsorbate during a continuous isotherm adsorption of the activated carbon column. Then, thermal regeneration of the saturated activated carbons was carried out under a microwave-induced heating process. The adsorption capacity of the virgin carbon made of bituminous coal (B-AC) was measured ca. 0.5-2.2% lower than that of the virgin carbon made of coconut shell (C-AC). It may be due to various functional groups and amounts are on structures of them. The adsorption capacity of either B-AC or C-AC was also increasing with an increasing concentration of the adsorbate via batch equilibrium adsorption tests. This implies that a multi-layers adsorption may be occurred between the adsorbate and surfaces of the activated carbons. Freundlish coefficients of K and n were calculated to be 10.0786 and 2.8563 with C-AC as well as to be 13.0377 and 3.4916 with B-AC. The adsorption capacities of the regenerated fixed-bed with either B-AC or C-AC increased with an increase of output power of microwave (PMW), gas hourly space velocity (GHSV) of carrier gas, and heating time period (tMW). The regeneration efficiency of the C-AC fixed-bed was calculated highly up to 111.53% and 114.45%, respectively, as a result of the microwave-induced regeneration process was prolonged to either 15 or 18 min. Both the adsorbate and other substances previously adsorbed onto either C-AC or B-AC may be almost desorbed during the microwave regeneration runs. The regenerated fixed-bed of either B-AC or C-AC was found with a higher adsorption capacity than that of the ones filled either virgin B-AC or virgin C-AC. In addition, adsorption capacity of both the regenerated fixed-beds would reach a maximum value at the sixth adsorption/regeneration cycle, and then decreased approximately to a constant value. This means that the field-spent carbon regenerated by microwave-induced heating method can be reused more times than the ones after traditional thermal regeneration runs. The advantage of microwave-induced heating technology is not only can significantly reduce operation time during the regeneration of activated carbon process, but also can save cost of buying virgin carbon and disposal of spent carbon. The optimum conditions for the carbon fixed-bed regeneration process were found for 15 min under microwave energy at a power level of 427.8 W as well as the inert gas at a GHSV of 287.9 h1. Time period for the microwave-induced regeneration of either C-AC or B-AC fixed-bed is recommended for 25 min if water of the carbons is removed by the gravity only. The energy cost of the microwave-induced regeneration runs is calculated approximately 7% of the regeneration runs carried out by heating with a traditional electrical furnace. Furthermore, cost of carrier gas consumed for the microwave-induced regeneration runs is about 30% of the electrical furnace heating runs.
LI, Wei-jun, and 李唯均. "The Regeneration and Reuse of Synthesized Zeolite for Adsorbing Ammonia-N in Wastewater by Using Microwave Plasma Approach." Thesis, 2019. http://ndltd.ncl.edu.tw/handle/5pcxqs.
Full text國立高雄科技大學
化學工程與材料工程系
107
The increasing levels of highly concentrated ammonium nitrogen wastewater in different bodies of water can cause serious ecological damage. Despite the abundance of techniques in treating ammonium nitrogen in water, there is still a lack of method that can be used to rapidly convert it. In this study, synthetic zeolite was utilized to adsorb high concentration of ammonium nitrogen in a simulated solution, and then the zeolite was regenerated via a rapid, dry plasma chemical process in order to convert and remove the ammonium nitrogen. The removal of NH4+-N from water was conducted using 5~20 g-zeolite/L-wastewater, 5-1000 mg-NH4+-N/L of NH4+-N, adsorption time of 0.25-48 hour, and operated at 25℃. The effect of ammonium nitrogen adsorption capacity (mg NH4+-N/g zeolite) and the NH4+-N removal rate (%) were studied. The regeneration of zeolite was then carried out at 1200 W and 200-400℃ for 2 min using nitrogen or air microwave plasma torch. The comparisons of zeolite after regeneration by different methods such as plasma, NaCl solution, and thermal treatment, was also performed in this study. The results from the analyses (crystal structure and morphology) made indicated that the synthetic zeolite is mainly composed of X-type zeolite and a trace of type A zeolite. Based on the conducted experiment, the maximum adsorption capacity could reach up to 41.4 mg NH4+-N/g zeolite and it can reach saturation within 15 minutes. This indicates that the zeolite has a high and rapid adsorption to ammonium nitrogen. Moreover, the ammonium nitrogen desorption rate can reach up to 80% when it was desorbed with 2 M NaCl solution. The study also revealed that at the given parameter: 25℃, initial NH4+-N concentration of 1000 mg-NH4+-N/L, and adsorption time of 15 min, the removal efficiency of NH4+-N reached 60% with an adsorption capacity of 29.8 mg NH4+-N/g-zeolite. The regeneration of zeolite was done using air plasma at 1200 W and 400℃. However, at 400℃, the desorption rate of NH4+-N reached up to 94% but the structure and morphology of zeolite were damaged, which resulted to a difficulty in repeated adsorption. Upon the comparison of plasma and thermal regeneration at 300°C, it is found out that the generated amount of air plasma regeneration and desorption is 79.2% of the theoretical adsorption capacity, which leads to an increased application efficiency. When the plasma is operated below 300℃, the specific surface area and destruction efficiency of NH4+-N have minimal influence in the decrease of adsorption capacity of the regenerated zeolite. However, it was detected that the zeolite retained its original crystal structure and morphology. In conclusion, the regeneration and reuse of synthesized zeolite for adsorbing ammonia -N in wastewater and desorption by dry plasma process, is a promising technique in the treatment of industrial wastewater.
Book chapters on the topic "Microwave regeneration"
Zhang-Steenwinkel, Y., L. M. Zande, and A. Bliek. "Microwave-Assisted Regeneration of Soot Filters." In Mixed Ionic Electronic Conducting Perovskites for Advanced Energy Systems, 137–42. Dordrecht: Springer Netherlands, 2004. http://dx.doi.org/10.1007/978-1-4020-2349-1_11.
Full textZande, L. M., Y. Zhang-Steenwinkel, G. Rothenberg, and A. Bliek. "Microwave Regeneration of Diesel Soot Filters." In Mixed Ionic Electronic Conducting Perovskites for Advanced Energy Systems, 247–51. Dordrecht: Springer Netherlands, 2004. http://dx.doi.org/10.1007/978-1-4020-2349-1_23.
Full textAbdelghaffar, Rehab. "Recycling/Regeneration of AC Using Microwave Technique." In SpringerBriefs in Molecular Science, 53–65. Cham: Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-41145-8_3.
Full textKurien, Caneon, Ajay Kumar Srivastava, Karan Anand, and Niranajan Gandigudi. "Modelling of Microwave-Based Regeneration in Composite Regeneration Emission Control System." In Advances in Intelligent Systems and Computing, 313–20. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-8618-3_33.
Full textDobrotvorskiy, Sergey, Aleksenko Borys, Vitalii Yepifanov, Yevheniia Basova, Ludmila Dobrovolska, and Viktor Popov. "The Absorbents Nanoporous Structures Regeneration for Industrial Dryers by Microwave Energy." In International Conference on Reliable Systems Engineering (ICoRSE) - 2021, 8–22. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-83368-8_2.
Full textKurien, Caneon, and Ajay Kumar Srivastava. "Active Regeneration of Diesel Particulate Filter Using Microwave Energy for Exhaust Emission Control." In Advances in Intelligent Systems and Computing, 1233–41. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-10-5903-2_129.
Full textShang, Xiaobiao, Junruo Chen, Weifeng Zhang, Jinyan Shi, Guo Chen, and Jinhui Peng. "Numerical Simulation of Microwave Absorption of Regenerative Heat Exchangers Subjected to Microwave Heating." In 5th International Symposium on High-Temperature Metallurgical Processing, 605–11. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2014. http://dx.doi.org/10.1002/9781118887998.ch75.
Full textDobrotvorskiy, Sergey S., Ludmila G. Dobrovolska, and Borys A. Aleksenko. "Computer Simulation of the Process of Regenerating the Adsorbent Using Microwave Radiation in Compressed Air Dryers." In Lecture Notes in Mechanical Engineering, 511–19. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-68619-6_49.
Full textRamanarayanan, K. T., Krishna Shankar, Satyapaul A. Singh, and Inkollu Sreedhar. "Microwave-augmented Carbon Capture." In Advances in Microwave-assisted Heterogeneous Catalysis, 217–49. Royal Society of Chemistry, 2023. http://dx.doi.org/10.1039/bk9781837670277-00217.
Full textAslam, Muhammad Shahzad, Yun Jin Kim, and Qian Linchao. "A Bio-Therapeutically Squalene." In Advances in Medical Education, Research, and Ethics, 53–65. IGI Global, 2023. http://dx.doi.org/10.4018/978-1-6684-7828-8.ch004.
Full textConference papers on the topic "Microwave regeneration"
Zappia, S., M. B. Lodi, R. Palmeri, A. Fanti, L. Crocco, and R. Scapaticci. "Bone Tissue Regeneration Monitoring Using Magnetic Scaffold via Microwave Imaging: a feasibility assesment." In 2024 International Conference on Electromagnetics in Advanced Applications (ICEAA), 1. IEEE, 2024. http://dx.doi.org/10.1109/iceaa61917.2024.10702020.
Full textKarpenko, Yu V., S. V. Korneyev, and V. N. Nefyodov. "Microwave soot trap regeneration." In Optical Monitoring of the Environment: CIS Selected Papers, edited by Nicholay N. Belov and Edmund I. Akopov. SPIE, 1993. http://dx.doi.org/10.1117/12.162181.
Full textGarner, C. P., and J. C. Dent. "Microwave Assisted Regeneration of Diesel Particulate Traps." In SAE International Congress and Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1989. http://dx.doi.org/10.4271/890174.
Full textVan Helden, Rinie, Frank Willems, Marc Van Aken, and Hans Strijbos. "Engine Demonstration of Microwave Assisted Particulate Trap Regeneration." In 2005 SAE Brasil Fuels & Lubricants Meeting. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2005. http://dx.doi.org/10.4271/2005-01-2141.
Full textZhi, Ning, Zi Xinyun, and Yongsheng He. "Radio-Frequency (RF) Technology for Filter Microwave Regeneration System." In International Fuels & Lubricants Meeting & Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2000. http://dx.doi.org/10.4271/2000-01-2845.
Full textZhi, Ning, Zhang Guanglong, Lu Yong, Liu Junmin, Gao Xiyan, Liang Iunhui, and Chen Jiahua. "Analysis of Characteristic of Microwave Regeneration for Diesel Particulate Filter." In International Off-Highway & Powerplant Congress & Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1995. http://dx.doi.org/10.4271/952058.
Full textGoncharenko, Yu V., M. I. Golovko, V. N. Gorobets, S. M. Zotov, and A. I. Govorishev. "Resonator for absorbent rapid regeneration in the electromagnetic field." In 2005 15th International Crimean Conference Microwave and Telecommunication Technology. IEEE, 2005. http://dx.doi.org/10.1109/crmico.2005.1565163.
Full textBaikov, A. Yu. "Resotrode with 2Π-regeneration — A promising new source of microwave power." In 2016 International Conference on Actual Problems of Electron Devices Engineering (APEDE). IEEE, 2016. http://dx.doi.org/10.1109/apede.2016.7878842.
Full textIriany, Aga Nugraha, and Erni Misran. "Kinetics study of regeneration spent bleaching earth by microwave-assisted extraction." In THE 4TH TALENTA CONFERENCE ON ENGINEERING, SCIENCE AND TECHNOLOGY (CEST)-2021: Sustainable Infrastructure and Industry in the New Normal Era. AIP Publishing, 2023. http://dx.doi.org/10.1063/5.0129301.
Full textChunrun, Zhang, Min Jiayi, Chen Jiahua, Liang Lunhui, Liu Junmin, and Li Chengbin. "Studies on Regeneration of Diesel Exhaust Particulate Filters by Microwave Energy." In International Off-Highway & Powerplant Congress & Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1994. http://dx.doi.org/10.4271/941774.
Full text