Relevant bibliographies by topics / Microstrip patch antenna

Academic literature on the topic 'Microstrip patch antenna'

Author: Grafiati
Published: 4 June 2021
Last updated: 11 September 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Contents

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Microstrip patch antenna.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Microstrip patch antenna"

1

Xu, Kaihang. "Broadband Microstrip Antenna Overview." Highlights in Science, Engineering and Technology 27 (December 27, 2022): 621–29. http://dx.doi.org/10.54097/hset.v27i.3825.

Full text
Abstract:
Microstrip antennas are widely used in people's daily life. Microstrip antenna has the advantages of low cost, low profile, small space occupation, and high conformal capability. So the design of microstrip antennas can be encountered in daily life. Microstrip antennas include the military, aerospace, medical, and so on. Microstrip antenna has a wide research space. The three microstrip antennas, U-shaped open slit laminated microstrip antenna, dual frequency circularly polarized laminated microstrip antenna, and non-radiating edge-fed broadband double-layer microstrip patch antenna are mainly introduced to understand the research progress and expectation of today's microstrip antennas. This paper firstly introduces the basic theoretical concept of microstrip antenna, then introduces the cavity mode theory, and then mainly lists and introduces three kinds of designed microstrip antenna structures. Finally, these three types of microstrip patch antennas are analyzed. And the advantages, disadvantages, and development fields of the corresponding types of microstrip patch antennas are introduced. The application determines the structure of the method used, and each design has its strengths. Microstrip antennas always have room for research, and continuous research will be applied to more fields.
APA, Harvard, Vancouver, ISO, and other styles
2

Tiwari, Rahul, and Seema Verma. "PROPOSED A COMPACT MULTIBAND AND BROADBAND RECTANGULAR MICROSTRIP PATCH ANTENNA FOR C-BAND AND X-BAND." INTERNATIONAL JOURNAL OF COMPUTERS & TECHNOLOGY 13, no. 3 (April 16, 2014): 4291–301. http://dx.doi.org/10.24297/ijct.v13i3.2760.

Full text
Abstract:
In this communication two proposed antenna described one for broadband at 6.71445GHz to 11.9362GHz with finite ground plane. The antenna designed with 11.4051mm× 8.388 mm radiating copper patch with ground plane design with 21.0051mm x17. 988mm. And this Compact broadband rectangular shape microstrip patch antenna is designed and analyzed for the return loss of -20.08 dB is achieved at the resonant frequency of 7.941GHz, From Antenna2-it is observed that, antenna for multiband at different frequency. The primary radiating elements are Simple Rectangular Microstrip Patch Antenna in upper side with probe feed and use finite ground plane are two parallel crossed printed slot for three different frequency applications which is smaller in size compared to other available multiband antennas. From the result, it is observed that, the return loss of -16.97 dB is achieved at the first resonant frequency of 4.853GHz, -10.30dB at the second resonant frequency of 8.382GHz, -10.73 dB at the third resonant frequency of 9.265GHz, -17.38 dB at the fourth resonant frequency of 10.15GHz and -12.37 dB at the fifth resonant frequency of 11.91GHz. This broadband and multi-band highly efficient antenna for use in C-Band, and X-Band.
APA, Harvard, Vancouver, ISO, and other styles
3

Ulima Achva, RA Jihan, and Mohammad Fadhli. "Optimasi Efisiensi Antena Microstrip Circular Patch menggunakan Optimizer CST, Algoritma Memetika, dan Slot Rectangular pada WiFi 5 GHz." Jurnal RESISTOR (Rekayasa Sistem Komputer) 6, no. 1 (April 30, 2023): 29–33. http://dx.doi.org/10.31598/jurnalresistor.v6i1.1401.

Full text
Abstract:
Wireless communication is an important requirement in various applications, especially in WiFi networks. The efficiency of an antenna is a crucial aspect in designing wireless communication system and plays a significant role in ensuring strong and reliable signal transmission. This research belongs to comparison of the result of optimizing the efficiency of microstrip circular patch antennas for 5GHz WiFi frequencies using the optimizer in CST, memetic algorithm and rectangular slot. From the simulation result, the efficiency values of the microstrip circular patch antennas using different optimization methods are as follows, microstrip circular patch antenna using the optimizer in CST 63,03%, microstrip circular patch antenna using the memetic algorithm 57,23%, and microstrip circular patch with a rectangular slot 56,20%. Additionally, the total efficiency simulation result show that the total efficiency value of the microstrip circular patch antenna using optimizer at cst is 62.8%, the microstrip circular patch uses the memetic algorithm 54.68%, ang the microstrip circular patch slot rectangular antenna is 56.20%.
APA, Harvard, Vancouver, ISO, and other styles
4

Kumar, Ravi, Anchal Garg, Heli Shah, and Bhupinder Kaur. "Survey on performance parameters of planar microwave antennas." International Journal of Experimental Research and Review 31, Spl Volume (July 30, 2023): 186–94. http://dx.doi.org/10.52756/10.52756/ijerr.2023.v31spl.017.

Full text
Abstract:
Planar antennas, which include microstrip antennas and printed circuit board antennas, are used in telecommunications. This study aims to provide an overview of microstrip antennas for diverse applications. Microstrip patch antenna design is a new study topic that has been established for usage in 5th-generation communication applications. An antenna is a group of connected devices that serve as a single antenna to broadcast or receive radio waves. Antennas come in a variety of designs and sizes. The paper discusses several printed microstrip antenna designs, such as rectangular to circular, broadband, dual-band, millimeter-wave and microstrip arrays. The microstrip patch is an antenna layout that is lightweight, low-profile, and results-oriented. Microstrip patch antennas may be employed in various 6G communication system applications in the future. This paper examines antenna geometric structures, antenna analysis methodologies, antenna dimensions and many different types of antennas. It will also go over the substrate materials, loss tangent, thickness, return loss, bandwidth, voltage-standing-wave-ratio (VSWR), gain, and directivity so that an optimized antenna can be designed and fabricated having excellent characteristics for use in modern applications by the promising academic researchers in the near future.
APA, Harvard, Vancouver, ISO, and other styles
5

Giri, Kali Krishna, Raj Kumar Singh, Kumari Mamata, and Ajeet Kumar Shrivastava. "A Theoretical Survey on Patch Antenna for Wideband Communication." International Journal of Research in Engineering, Science and Management 3, no. 11 (November 20, 2020): 69–73. http://dx.doi.org/10.47607/ijresm.2020.376.

Full text
Abstract:
Modern communication system is based on wideband communication. A wideband antenna is designed in such a way that it will receive a wide range of frequencies. Microwave frequency spectrum is classified as ranging from 1GHz to 100GHz and this range is divided into a number of frequency bands. These bands are defined as L Band, S Band, C Band, X Band etc. To fulfil the demands of many users patch antenna is designed in these bands. Among different types of antenna, Microstrip Patch Antenna is most popular in wireless communication system. Microstrip patch Antennas have many advantages over other familiar antennas because microstrip patch antennas are of low profile, low cost, low volume, light weight. Low efficiency, low gain and narrow bandwidth of patch antenna create major challenge to a designer. Slots are created on patch for preparing antenna forwideband applications. In this paper, we have surveyed upon various types of Microstrip Patch Antenna, feeding techniques, design equation Substrate Characteristics, Simulation tools etc.
APA, Harvard, Vancouver, ISO, and other styles
6

Ramacharya, Srinivas. "Microstrip Patch Antenna for Modern Communication Applications." International Journal for Research in Applied Science and Engineering Technology 11, no. 6 (June 30, 2023): 4839–41. http://dx.doi.org/10.22214/ijraset.2023.54539.

Full text
Abstract:
Abstract: In this communication the overview of Microstrip Patch Antenna for modern Communication applications. This paper illustrates the basic structure of the microstrip antenna. The excitation methods are presented. The simulation of these antennas using different software’s is discussed. The applications of microstrip antennas with its modifications are presented.
APA, Harvard, Vancouver, ISO, and other styles
7

Maharjan, Janam, and Dong-You Choi. "Four-Element Microstrip Patch Array Antenna with Corporate-Series Feed Network for 5G Communication." International Journal of Antennas and Propagation 2020 (April 27, 2020): 1–12. http://dx.doi.org/10.1155/2020/8760297.

Full text
Abstract:
The paper proposes a simple four-element microstrip patch array antenna fed with corporate-series technique. The paper compares the proposed design with four-element antennas fed with only series-fed and corporate-fed microstrip antennas. All three antenna designs use rectangular microstrip patch elements with two insets and slots on both sides of the patch. The patch elements are accompanied by Yagi elements: three director elements and two reflector elements. Through comparison of simulation results, the paper shows that four-element array antenna with combined corporate-series feeding technique performs better compared to antennas with only either series or corporate feeding network. The proposed corporate-series fed antenna achieves better performance with wide frequency bandwidth of 25.04–30.87 GHz and gain of 9.5 dB. The antenna has an end-fire radiation pattern. Overall performance shows that the proposed corporate-series-fed microstrip patch antenna with Yagi elements is suitable for next generation 5G communication.
APA, Harvard, Vancouver, ISO, and other styles
8

Singh, Khushboo, Sonal Patil, Ashwini Naik, and Sujata Kadam. "Hexagonal Microstrip Patch Antenna Design for UWB Application." ITM Web of Conferences 44 (2022): 02004. http://dx.doi.org/10.1051/itmconf/20224402004.

Full text
Abstract:
Microstrip patch antennas is one of the most used antennas for wireless communication. Its key features include a limited bandwidth, low cost, and ease of manufacture. This paper describes about the design of microstrip patch antenna over the frequency range of 3.1 GHz to 10.6 GHz for UWB applications. The substrate material chosen is FR4, having a loss tangent of 0.02, dielectric constant of 4.4, and substrate thickness of 1.59 mm. This work presents design of microstrip antenna with hexagonal shaped radiating patch. An antenna is modelled and analysed using HFSS 2021 R2 software. The antenna structure provides return loss which is less than -10 dB and a VSWR less than 2 over the specified frequency range. The simulated results of proposed hexagonal shaped microstrip patch antenna provides a peak gain of 5.32 dB with radiation efficiency of 90.88%. The planned antennas can be used for UWB applications.
APA, Harvard, Vancouver, ISO, and other styles
9

Srishti, Sneha, Siddhi Jain, and Rahul Gowda. "Design and Analysis of MSPA using FR-4 Epoxy Dielectric for Wireless Broadband Application." Middle East Research Journal of Engineering and Technology 3, no. 1 (January 21, 2023): 12–20. http://dx.doi.org/10.36348/merjet.2023.v03i01.003.

Full text
Abstract:
In modern communication devices, microstrip patch antennas are preferred to conventional antennas due to their size. In this review, a survey of commonly used techniques and designs for microstrip antennas is conducted. These techniques and designs were used by the authors to design an effective, low-profile, small, compatible, and affordable microstrip antenna. They were mostly used to design reconfigurable, multiband, and wideband antennas. After that, a initiator patch design with dimensions is provided on which technique will be used to analyze various antenna parameters. In recent years, research into microstrip patch antennas has made significant progress. Microstrip patch horns outperform conventional microstrip patches in a number of ways, including their low cost, ease of integration with integrated microwave circuits (MICs), low volume, small size, high performance, and low weight.
APA, Harvard, Vancouver, ISO, and other styles
10

Eardprab, Sanchai, Chuwong Phongcharoenpanich, and Danai Torrungrueng. "Improvement of a Circular Microstrip Antenna Excited by Four Feeds and Suspended with Artificial Magnetic Conductors." International Journal of Antennas and Propagation 2013 (2013): 1–10. http://dx.doi.org/10.1155/2013/310686.

Full text
Abstract:
The proposed antenna is a circular microstrip structure excited by four feeds and suspended with artificial magnetic conductors (AMCs). The multifeed circular microstrip antennas can generate a high circularly polarized performance by using a different feed arrangement. AMC structures with a square, circular, or octagonal patch on a unit cell are designed and applied to circular microstrip patch antennas for the enhancement of antenna performance. It is found that simulated results of the proposed antenna are well suited. The properties of wide beamwidth with good axial ratio can be achieved when applying the proposed AMC structures to circular microstrip antennas. The antenna prototype was fabricated to validate simulated results.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Microstrip patch antenna"

1

Lai, Hau Wah. "Wideband meandering probe-fed patch antenna /." access full-text access abstract and table of contents, 2005. http://libweb.cityu.edu.hk/cgi-bin/ezdb/thesis.pl?phd-ee-b19887383a.pdf.

Full text
Abstract:
Thesis (Ph. D.)--City University of Hong Kong, 2005.
"Submitted to Department of Electronic Engineering in partial fulfillment of the requirements for the degree of Doctor of Philosophy." Includes bibliographical references (leaves 144-153).
APA, Harvard, Vancouver, ISO, and other styles
2

Chiu, Chi Yuk. "Impedance bandwidth broadening techniques for small patch antennas /." access full-text access abstract and table of contents, 2005. http://libweb.cityu.edu.hk/cgi-bin/ezdb/thesis.pl?phd-ee-b19887796a.pdf.

Full text
Abstract:
Thesis (Ph.D.)--City University of Hong Kong, 2005.
"Submitted to Department of Electronic Engineering in partial fulfillment of the requirements for the degree of Doctor of Philosophy" Includes bibliographical references (leaves 152-162)
APA, Harvard, Vancouver, ISO, and other styles
3

Okuducu, Yusuf. "Dual Band Microstrip Patch Antenna Structures." Master's thesis, METU, 2005. http://etd.lib.metu.edu.tr/upload/2/12606859/index.pdf.

Full text
Abstract:
Wideband and dual band stacked microstrip patch antennas are investigated for the new wideband and dual band applications in the area of telecommunications. In this thesis, aperture-coupled stacked patch antennas are used to increase the bandwidth of the microstrip patch antenna. By this technique, antennas with 51% bandwidth at 6.1 GHz and 43% bandwidth at 8 GHz satisfying S11<
-15 dB are designed, manufactured and measured. A dual-band aperture coupled stacked microstrip patch antenna operating at 1.8 GHz with 3.8% bandwidth and at 2.4 GHz with 1.6% bandwidth is designed, produced and measured for mobile phone and WLAN applications. In addition, an aperture coupled stacked microstrip patch antenna which operates at PCS frequencies in 1.7-1.95 GHz band is designed. Dual and circularly polarized stacked aperture coupled microstrip patch antennas are also investigated. A triple band dual polarized aperture coupled stacked microstrip patch antenna is designed to operate at 900 MHz, at 1.21 GHZ and at 2.15 GHz. Mutual coupling between aperture coupled stacked microstrip patch antennas are examined and compared with the coupling of aperture coupled microstrip patch antennas
APA, Harvard, Vancouver, ISO, and other styles
4

Li, Pei. "Novel wideband dual-frequency L-probe fed patch antenna and array /." access abstract and table of contents access full-text, 2006. http://libweb.cityu.edu.hk/cgi-bin/ezdb/thesis.pl?phd-ee-b21471447a.pdf.

Full text
Abstract:
Thesis (Ph.D.)--City University of Hong Kong, 2006.
"Submitted to Department of Electronic Engineering in partial fulfillment of the requirements for the degree of Doctor of Philosophy" Includes bibliographical references (leaves 179-189)
APA, Harvard, Vancouver, ISO, and other styles
5

Revankar, U. K. "Three-Layer Electromagnetically Coupled Circular Microstrip Antennas." Thesis, Indian Institute of Science, 1995. https://etd.iisc.ac.in/handle/2005/241.

Full text
Abstract:
Presented in this thesis are the following experimental and theoretical investigations carried out on the three-layer electromagnetically coupled (EMC) circular microstrip antennas and their arrays. 1.Three-Layer EMC Circular Microstrip Antenna A three-layer EMC circular microstrip antenna consists of a probe-fed circular microstrip patch having two parasitically excited circular microstrip patches (without ground planes) stacked above it, with air gaps in between successive substrates. In the "inverted" configuration, the parasitic patches are on the lower (nearer to the driven substrate) surface of the substrate. An exhaustive experimental study of the resonant frequencies, input impedance, impedance bandwidth and radiation characteristics of this antenna, has been carried out for both the "normal" and the "inverted" configurations. Based on this experimental study, the design and optimisation of the antenna have been discussed and experimentally tested. In the S-band, it is found that an impedance bandwidth as high as 20 percent coupled with good patterns, high gain and low cross-polarisation levels, have been obtained. 2.Three-Layer EMC Circular Microstrip Antenna Arrays Experimental work has also been carried out on linear arrays of three-layer EMC circular microstrip antennas. The design of a linear array both in the E- and H- planes, of the three-layer microstrip antennas in their "normal" as well as "inverted" configurations, has been discussed and realisation carried out. Impedance bandwidths of the arrays have been experimentally found to be the same as that of the three-layer antenna element High gain and good pattern shape with sidelobes as well as cross-polarisation levels better than -20 dB through a scan angle of 40°, have been realised. A study of the mutual coupling between two-layer as well as three-layer EMC circular patch elements has also been carried out for the useful range of interelement spacings. 3.Theoretical Analysis of Resonant Frequencies of Multilayer Patch Structures Theoretical investigations have been carried out on the resonance properties of single-layer and multilayer EMC patch structures employing the full-wave analysis based on spectral domain immittance approach. The impedance Green's functions for all these structures have been derived from the combination of equivalent transverse transmission lines concept Galerkin's method is employed in the spectral (Hankel) transform domain where two sets of disk current expansions are used for obtaining die characteristic equation. By solving the characteristic equation, the resonant frequencies are obtained for various values of the parameters of the layered antenna.
APA, Harvard, Vancouver, ISO, and other styles
6

Revankar, U. K. "Three-Layer Electromagnetically Coupled Circular Microstrip Antennas." Thesis, Indian Institute of Science, 1995. http://hdl.handle.net/2005/241.

Full text
Abstract:
Presented in this thesis are the following experimental and theoretical investigations carried out on the three-layer electromagnetically coupled (EMC) circular microstrip antennas and their arrays. 1.Three-Layer EMC Circular Microstrip Antenna A three-layer EMC circular microstrip antenna consists of a probe-fed circular microstrip patch having two parasitically excited circular microstrip patches (without ground planes) stacked above it, with air gaps in between successive substrates. In the "inverted" configuration, the parasitic patches are on the lower (nearer to the driven substrate) surface of the substrate. An exhaustive experimental study of the resonant frequencies, input impedance, impedance bandwidth and radiation characteristics of this antenna, has been carried out for both the "normal" and the "inverted" configurations. Based on this experimental study, the design and optimisation of the antenna have been discussed and experimentally tested. In the S-band, it is found that an impedance bandwidth as high as 20 percent coupled with good patterns, high gain and low cross-polarisation levels, have been obtained. 2.Three-Layer EMC Circular Microstrip Antenna Arrays Experimental work has also been carried out on linear arrays of three-layer EMC circular microstrip antennas. The design of a linear array both in the E- and H- planes, of the three-layer microstrip antennas in their "normal" as well as "inverted" configurations, has been discussed and realisation carried out. Impedance bandwidths of the arrays have been experimentally found to be the same as that of the three-layer antenna element High gain and good pattern shape with sidelobes as well as cross-polarisation levels better than -20 dB through a scan angle of 40°, have been realised. A study of the mutual coupling between two-layer as well as three-layer EMC circular patch elements has also been carried out for the useful range of interelement spacings. 3.Theoretical Analysis of Resonant Frequencies of Multilayer Patch Structures Theoretical investigations have been carried out on the resonance properties of single-layer and multilayer EMC patch structures employing the full-wave analysis based on spectral domain immittance approach. The impedance Green's functions for all these structures have been derived from the combination of equivalent transverse transmission lines concept Galerkin's method is employed in the spectral (Hankel) transform domain where two sets of disk current expansions are used for obtaining die characteristic equation. By solving the characteristic equation, the resonant frequencies are obtained for various values of the parameters of the layered antenna.
APA, Harvard, Vancouver, ISO, and other styles
7

Smith, Christopher Brian. "Wideband dual-linear polarized microstrip patch antenna." [College Station, Tex. : Texas A&M University, 2008. http://hdl.handle.net/1969.1/ETD-TAMU-3162.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Belentepe, Bilge. "Electromagnetically coupled microstrip patch antenna array design." Thesis, University of Surrey, 1993. http://epubs.surrey.ac.uk/842825/.

Full text
Abstract:
This work is an effort to investigate and derive a simple equivalent circuit model to represent an electromagnetically coupled microstrip patch antenna. This provides a simple approach to the complicated electromagnetic coupling behaviour in the patch. A simplified theory based on the broadside coupled line and improved transmission line theories is developed to derive the equivalent circuit of EM coupled patch antenna. The design parameters are determined from the above mentioned theory. Computer programs are developed to provide a practical design of such antennas without involving complicated, time consuming, rigorous methods. A number of sample patches are designed, made and tested to verify the theory. These elements are also incorporated into an array to evaluate their performance in an array environment. The impedance and pattern measurements are made for comparison with theoretical results.
APA, Harvard, Vancouver, ISO, and other styles
9

Krier, Peter. "Microstrip patch antennas on gallium arsenide substrates." Thesis, University of Leeds, 1990. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.256366.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Fatthi, Alsager Ahmed. "Design and Analysis of Microstrip Patch Antenna Arrays." Thesis, Högskolan i Borås, Institutionen Ingenjörshögskolan, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:hb:diva-20461.

Full text
Abstract:
The performance and advantages of microstrip patch antennas such as lowweight, low profile, and low cost made them the perfect choice forcommunication systems engineers. They have the capability to integrate withmicrowave circuits and therefore they are very well suited for applications suchas cell devices, WLAN applications, navigation systems and many othersIn this thesis; a compact rectangular patch antennas are designed and tested forGPS devices at 1.57542 GHz, and for a satellite TV signal at 11.843 GHz and11.919 GHz. The final part of this work has been concentrated on studying anarray antenna with two and four elements. The antennas of the design examplesof this work has been manufactured and tested in laboratory.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Microstrip patch antenna"

1

E, Gardiol Fred, ed. Broadband patch antennas. Boston: Artech House, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Simons, Rainee. Feasibility study of optically transparent microstrip patch antenna. [Washington, D.C: National Aeronautics and Space Administration, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Ormiston, Thomas Dominic. A low noise active quarter wavelength microstrip patch antenna. Birmingham: University of Birmingham, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Simons, Rainee N. Suspended patch antennas with electromagnetically coupled inverted microstrip feed for circular polarization: [final report]. [Cleveland, Ohio]: National Aeronautics and Space Administration, Glenn Research Center, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Simons, Rainee N. Novel on-wafer radiation pattern measurement technique for MEMS actuator based reconfigurable patch antennas. Cleveland, Ohio: National Aeronautics and Space Administration, Glenn Research Center, 2003.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Simons, Rainee N. Novel on-wafer radiation pattern measurement technique for MEMS actuator based reconfigurable patch antennas. Cleveland, Ohio: National Aeronautics and Space Administration, Glenn Research Center, 2003.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Simons, Rainee. Novel on-wafer radiation pattern measurement technique for MEMS actuator based reconfigurable patch antennas. Cleveland, Ohio: National Aeronautics and Space Administration, Glenn Research Center, 2003.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Simons, Rainee N. Novel on-wafer radiation pattern measurement technique for MEMS actuator based reconfigurable patch antennas. Cleveland, Ohio: National Aeronautics and Space Administration, Glenn Research Center, 2003.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Lee, Kai Fong. Microstrip patch antennas. London: Imperial College Press, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Waterhouse, R. B. Microstrip patch antennas: A designer's guide. Boston: Kluwer Academic Publishers, 2003.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Microstrip patch antenna"

1

Nkordeh, Nsikan, Francis Idachaba, Oluyinka Oni, and Ibinabo Bob-Manuel. "Microstrip Patch Antenna." In Transactions on Engineering Technologies, 535–46. Singapore: Springer Singapore, 2016. http://dx.doi.org/10.1007/978-981-10-1088-0_39.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Lee, Kai Fong, and Kin-Fai Tong. "Microstrip Patch Antennas." In Handbook of Antenna Technologies, 787–852. Singapore: Springer Singapore, 2016. http://dx.doi.org/10.1007/978-981-4560-44-3_29.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Lee, Kai Fong, and Kin-Fai Tong. "Microstrip Patch Antennas." In Handbook of Antenna Technologies, 1–55. Singapore: Springer Singapore, 2015. http://dx.doi.org/10.1007/978-981-4560-75-7_29-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Singh, Arun Kumar, Rabindranath Bera, and Bansibadan Maji. "Microstrip Patch Antenna: A Review." In Lecture Notes in Electrical Engineering, 317–24. Singapore: Springer Singapore, 2017. http://dx.doi.org/10.1007/978-981-10-4765-7_33.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Singh, Amit K., Mahesh P. Abegaonkar, and Shiban Kishen Koul. "Miniaturization of Microstrip Patch Antennas Using Metamaterials." In Metamaterials for Antenna Applications, 37–75. Boca Raton: CRC Press, 2021. http://dx.doi.org/10.1201/9781003045885-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Rajshri, Saumya Das, and Tanushree Bose. "Multiband Slotted Circular Microstrip Patch Antenna." In Advances in Communication, Devices and Networking, 351–58. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-10-7901-6_38.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Cheng, Yong, ZhenYa Wang, XuWen Liu, and HongBo Zhu. "A Frequency Reconfigurable Microstrip Patch Antenna." In Lecture Notes in Electrical Engineering, 925–31. Cham: Springer International Publishing, 2013. http://dx.doi.org/10.1007/978-3-319-01273-5_104.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Lee, K. F., K. M. Luk, T. Huynh, K. F. Tong, and R. Q. Lee. "U-Slot Patch Wideband Microstrip Antenna." In Directions for the Next Generation of MMIC Devices and Systems, 145–52. Boston, MA: Springer US, 1997. http://dx.doi.org/10.1007/978-1-4899-1480-4_17.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Patel, Vibha, Trushita Chaware, Pooja Gundewar, Anjali Askhedkar, Dipalee Pawar, Anurag Nagdeve, and Pranjali Gaikwad. "Moisture Sensor Using Microstrip Patch Antenna." In Lecture Notes in Electrical Engineering, 689–700. Singapore: Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-16-7985-8_72.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Aghwariya, Mahesh Kumar, and Amit Kumar. "Microstrip Patch Antenna Techniques for Wireless Applications." In Microstrip Antenna Design for Wireless Applications, 3–12. New York: CRC Press, 2021. http://dx.doi.org/10.1201/9781003093558-2.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Microstrip patch antenna"

1

Das, Hangsa Raj, Rajesh Dey, and Sumanta Bhattacharya. "A REVIEW PAPER ON DESIGN FOR MICROSTRIP PATCH ANTENNA." In Topics in Intelligent Computing and Industry Design. Volkson Press, 2021. http://dx.doi.org/10.26480/etit.02.2020.166.168.

Full text
Abstract:
Microstrip patch antenna is mostly used in modern communication devices over conventional antennas mainly because of their size. In this review paper a survey is conducted on commonly used techniques and design used in microstrip antenna papers which has been used by authors for designing of an efficient, low profile, small, compatible, affordable microstrip antenna, mainly used to designed reconfigurable, multiband and wideband antennas, after that a initiator patch design is given with dimensions on which technique will be applied for the analysis of different parameter of antenna.
APA, Harvard, Vancouver, ISO, and other styles
2

Daliri, Ali, Chun H. Wang, Sabu John, Amir Galehdar, Wayne S. T. Rowe, and Kamran Ghorbani. "Multidirectional Circular Microstrip Patch Antenna Strain Sensor." In ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. ASMEDC, 2011. http://dx.doi.org/10.1115/smasis2011-5065.

Full text
Abstract:
In this paper, a new design for microstrip patch antenna strain sensors is proposed. The new antenna sensor works based on the meandered microstrip patch antennas. It is threefold more sensitive than previously proposed circular microstrip patch antenna strain sensors. Also, the overall physical dimension of the new antenna sensor is reduced by the factor of five. The current sensor is able to detect strain in all directions. In order to design the antenna sensor, two available commercial FEM software packages ANSYS™ and HFSS™ are used. Both experimental and FEM results corroborate the multidirectional feature of the new antenna sensor. Also, the effect of the hole size in the structure (for coaxial connection to the antenna) on the antenna performance has been studied. Based on the results obtained, the antenna sensor can be recommended for use in structural health monitoring for strain-based damage detection in aerospace structures.
APA, Harvard, Vancouver, ISO, and other styles
3

Singh, Simerpreet, Gaurav Sethi, and Jaspal Singh Khinda. "A Review Analysis on Microstrip Patch Antenna." In International Conference on Women Researchers in Electronics and Computing. AIJR Publisher, 2021. http://dx.doi.org/10.21467/proceedings.114.40.

Full text
Abstract:
This article presents the general overview of various antennas and a detailed study of Microstrip Antenna (MPA). The MPA designing equations and basic structure is explained in this manuscript. The properties of the materials required for MPA is summarized in table form. Some practical antenna structures are also explained here in order to analyze the overall view of MPAs after explanation of most common patch structure shapes. At last, the properties of Co-axial, Proximity Coupling, Aperture Coupling and stripline feeding are also introduce in terms of ease of fabrication, impedance, modelling, bandwidth etc.
APA, Harvard, Vancouver, ISO, and other styles
4

Daliri, Ali, Sabu John, Amir Galehdar, Wayne S. T. Rowe, and Kamran Ghorbani. "Strain Measurement in Composite Materials Using Microstrip Patch Antennas." In ASME 2010 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. ASMEDC, 2010. http://dx.doi.org/10.1115/smasis2010-3703.

Full text
Abstract:
In this paper the feasibility of using a circular microstrip patch antenna to detect strain in composite plates and the effects of different materials on sensitivity of the patch antenna are investigated. Also the effect of strain direction on the frequency shift is studied. The theoretical model shows a linear relationship between strain and the shift in the resonant frequency of the antenna in any material. A circular microstrip patch antenna is designed and fabricated to work at 1.5GHz and attached to three different materials for testing. Both Finite Element Analysis (FEA) and experimental tests have been undertaken to corroborate the relationship between strain and frequency shift. The ultimate intention of this work is to configure antennas for the detection of relatively small damage zones in structures and to do so wirelessly.
APA, Harvard, Vancouver, ISO, and other styles
5

Sultan, Farooq, and Sheikh Sharif Iqbal. "Beam scannable microstrip patch antenna." In 2014 International Workshop on Antenna Technology: "Small Antennas, Novel EM Structures and Materials, and Applications" (iWAT). IEEE, 2014. http://dx.doi.org/10.1109/iwat.2014.6958600.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Xingguang, Li, Chen Dianren, Zhao Shuang, and Chen Lei. "Monolithic conformai microstrip patch antenna." In 2016 International Conference On Communication Problem-Solving (ICCP). IEEE, 2016. http://dx.doi.org/10.1109/iccps.2016.7751096.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Wahbh, W., Ahmed Abdel Nazir, A. H. Zaki, and A. M. M. A. Allam. "Perforated substrate microstrip patch antenna." In 2011 IEEE Antennas and Propagation Society International Symposium and USNC/URSI National Radio Science Meeting. IEEE, 2011. http://dx.doi.org/10.1109/aps.2011.5997190.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Abdelaziz, Abdelaziz A., and Dalia M. Nashaat. "Compact GPS Microstrip Patch Antenna." In MILCOM 2007 - IEEE Military Communications Conference. IEEE, 2007. http://dx.doi.org/10.1109/milcom.2007.4454936.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Caliskan, Kaan, Salih H. Ozkul, Hasan C. Sarigul, Yunus Emre Ozmen, and Taha Imeci. "Ku Band microstrip patch antenna." In 2015 23th Signal Processing and Communications Applications Conference (SIU). IEEE, 2015. http://dx.doi.org/10.1109/siu.2015.7130040.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Zulqarnain, Anum, Quratulain, Ramlah Baber, and Sarah Saeed. "Square Spiral Microstrip Patch Antenna." In 2019 International Conference on Electrical, Communication, and Computer Engineering (ICECCE). IEEE, 2019. http://dx.doi.org/10.1109/icecce47252.2019.8940649.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Microstrip patch antenna"

1

Thursby, Michael H. Phase Control of a Microstrip Patch Antenna. Fort Belvoir, VA: Defense Technical Information Center, April 1995. http://dx.doi.org/10.21236/ada299162.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Clutter sensitivity test under controlled field conditions Resonant Microstrip Patch Antenna (RMPA) sensor technology. Office of Scientific and Technical Information (OSTI), June 1996. http://dx.doi.org/10.2172/534541.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Microstrip patch antenna' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography