Academic literature on the topic 'Microhardness'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Microhardness.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "Microhardness"
Serebryakova, A. A., D. V. Zaguliaev, V. V. Shlyarov, V. E. Gromov, and K. V. Aksenova. "Study of Microhardness and Plasticity Parameter of Lead in External Magnetic Fields with Induction up to 0.5 T." Izvestiya of Altai State University, no. 4(132) (September 14, 2023): 52–58. http://dx.doi.org/10.14258/izvasu(2023)4-07.
Full textConstantinidis, G., R. D. Tomlinson, and H. Neumann. "Microhardness of CuInSe2." Philosophical Magazine Letters 57, no. 2 (February 1988): 91–97. http://dx.doi.org/10.1080/09500838808229616.
Full textMilosan, Ioan. "Study and Researches about the Microhardness’s Variation of a Special S.G. Cast Iron." Materials Science Forum 638-642 (January 2010): 1233–36. http://dx.doi.org/10.4028/www.scientific.net/msf.638-642.1233.
Full textKazak, Magrur, Safiye Selin Koymen, and Nazmiye Donmez. "Can different polymerization times affect the surface microhardness, water sorption, and water solubility of flowable composite resins?" Bioscience Journal 39 (April 14, 2023): e39073. http://dx.doi.org/10.14393/bj-v39n0a2023-66895.
Full textNeumann, H. "Microhardness scaling and bulk modulus-microhardness relationship in AIIBIVC2V chalcopyrite compounds." Crystal Research and Technology 23, no. 1 (January 1988): 97–102. http://dx.doi.org/10.1002/crat.2170230113.
Full textWang, Su Ping, Xue Gong Bi, and De Ming Weng. "Study on Sinter Microhardness of WISCO." Advanced Materials Research 900 (February 2014): 725–29. http://dx.doi.org/10.4028/www.scientific.net/amr.900.725.
Full textEl Gezawi, M., D. Kaisarly, H. Al-Saleh, A. ArRejaie, F. Al-Harbi, and KH Kunzelmann. "Degradation Potential of Bulk Versus Incrementally Applied and Indirect Composites: Color, Microhardness, and Surface Deterioration." Operative Dentistry 41, no. 6 (November 1, 2016): e195-e208. http://dx.doi.org/10.2341/15-195-l.
Full textAtkarskaya, A. B., S. V. Zaitsev, S. Yu Kabanov, and V. G. Shemanin. "Microhardness of Multilayer Composites." Inorganic Materials: Applied Research 10, no. 4 (July 2019): 884–86. http://dx.doi.org/10.1134/s2075113319040038.
Full textZewen, Wang, and Jie Wanqi. "Microhardness of Hg1−xMnxTe." Materials Science and Engineering: A 452-453 (April 2007): 508–11. http://dx.doi.org/10.1016/j.msea.2006.10.079.
Full textChristodoulou, Periklis, Małgorzata Garbiak, and Bogdan Piekarski. "Materials microhardness “finger prints”." Materials Science and Engineering: A 457, no. 1-2 (May 2007): 350–67. http://dx.doi.org/10.1016/j.msea.2006.12.115.
Full textDissertations / Theses on the topic "Microhardness"
Riches, Philip Edward. "Knoop microhardness of diaphyseal bone." Thesis, University of Bristol, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.285817.
Full textShtefan, V. V., A. S. Yepifanova, I. S. Berezovskyi, and T. V. Shkolnikova. "Study of Morphology and Microhardness of Со-Мо Alloys Films." Thesis, Прикарпатський національний університет ім. Василя Стефаника, 2017. http://repository.kpi.kharkov.ua/handle/KhPI-Press/31678.
Full textSmith, Mackenzie Boeing J. "Developement of a Microhardness Acceptance Criterion for TB Weld Qualification." The Ohio State University, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=osu153175273381454.
Full textCOUTO, ANTONIO A. "Transformacoes de fase e propriedades da liga FECO-2V." reponame:Repositório Institucional do IPEN, 1989. http://repositorio.ipen.br:8080/xmlui/handle/123456789/10246.
Full textMade available in DSpace on 2014-10-09T13:59:26Z (GMT). No. of bitstreams: 1 03869.pdf: 1530426 bytes, checksum: 572e7a2dbb3cf5d7e1b444b448a01e81 (MD5)
Dissertacao (Mestrado)
IPEN/D
Instituto de Pesquisas Energetica e Nucleares IPEN/CNEN-SP
Majeed, Abdul. "An in vitro study of microleakage and surface microhardness of nanocomposite restorative materials." Thesis, University of the Western Cape, 2005. http://etd.uwc.ac.za/index.php?module=etd&.
Full textToker, Sidika Mine. "An Investigation Of Microstructure, Microhardness And Biocompatibility Characteristics Of Yttrium Hydroxyapatite Doped With Fluoride." Master's thesis, METU, 2010. http://etd.lib.metu.edu.tr/upload/12611540/index.pdf.
Full text#61616
C for 1 hour. Increased densities were achieved upon Y3+ doping while F- doping led to a decrease in densities. For structural analysis, XRD, SEM and FTIR spectroscopy examinations were performed. No secondary phases were observed in XRD studies upon doping. Lattice parameters decreased due to substitutions of ions. In SEM analysis, addition of doping ions was observed to result in smaller grains. In FTIR analysis, in addition to the characteristic bands of HA, novel bands indicating the substitution of F- ions were observed in F- ion doped samples. The highest microhardness value was obtained for the sample doped with 2.5%Y3+, 1%F-. Increased F- ion contents resulted in decreased microhardness values. For biocompatibility evaluation, in vitro tests were applied to the materials. MTT assay was performed for Saos-2 cell proliferation analysis. Y3+ and F- ion incorporation was found to improve cell proliferation on HA discs. Cells were found to attach and proliferate on disc surfaces in SEM analysis. ALP assay showed differentiation of cells on the discs can be improved by doping HA with an optimum amount of F- ion. Dissolution tests in DMEM revealed that structural stability of HA was improved with F- ion incorporation. The material exhibiting optimum structural, mechanical and biocompatibility properties was HA doped with 2.5%Y3+, 1%F-.
Godel, Jeffrey Harold. "Diametral Tensile Strength, Microhardness, Surface Modulus, and Surface Morphology of Novel,Antibacterial Orthodontic Adhesives." Master's thesis, Temple University Libraries, 2016. http://cdm16002.contentdm.oclc.org/cdm/ref/collection/p245801coll10/id/410293.
Full textM.S.
Objective: Prior to the advent of bonded orthodontic appliances each tooth was fitted with a band made from stainless steel. Traditionally they were cemented to the tooth with a zinc phosphate cement. This acted more as a luting agent then adding to the actual adherence of the band to the tooth. In addition, often times the cement would wash out and upon the band removal white spot lesions and or carious lesions were present. The development of glass monomer cements had a traumatic improvement over both the adhesion to the tooth and a diminishing of white spot lesions in part due to the release of fluoride. Since the advent of the acid-etch technique and the bonding of orthodontic brackets directly to the enamel various bonding adhesives were developed. The first and most popular bonding resins were chemical curing bonding systems. The general class of self-adhesive and/or self-etching orthodontic adhesives are of several types, including resin-modified cements, such as resin-modified glass ionomer cements, that exhibit self-adhesive properties to enamel, as well as self-etching primers that combine the conditioning and priming agents into one acidic, polymerizable composition for application to the tooth surface, and do not require separate etching and rinsing steps. Not only do resin modified glass ionomers have the benefit of chemically bonding to a clean and un-etched enamel surface, but these self-adhesive cements also release significant and continuous levels of fluoride ion. Recently investigators have explored adding antimicrobial agents in addition to fluoride in orthodontic adhesives. One such approach has been the addition of ZnO powder, a known compound with anti-microbial properties, to an orthodontic resin modified glass ionomer adhesive. It should also be noted that zinc ions and compounds have been shown to positively influence enamel remineralization and enhance apatite formation. The objective of this research is to evaluate the effect of the addition of an antimicrobial agent, zinc oxide powder, on selected mechanical properties of a resin modified glass ionomer orthodontic adhesive. Methods: A resin modified glass ionomer (Fuji Ortho LC), in its two-component, powder/liquid format were utilized in this study. Control specimens, according to manufacturer's directions for use, were prepared for both diametral tensile and microhardness testing with be prepared. Using the powder component provided in the marketed product; powder blends containing both 10 and 20 percent Zinc Oxide (by weight) will be added to the RMGI powder, and thoroughly mixed and blended to create a uniform powder blend. The mechanical testing will be performed on 8-10 disc specimens, approximately 6.2 mm diameter by 3.1 mm in height, using a standardized mixing and molds for each material. The specimens will be tested using the Instron 5569 testing machine at a crosshead speed of 0.75 mm/minute for DTS until failure occurs. Data was recorded in Newton’s (N) force. The microhardness testing was performed on 12 disc specimens, approximately 6.2 mm diameter by 3.1 mm in height, using a standardized mixing and molds for each material. A CSM microindentation testing device was used to measure theVickers microhardness. The surface morphological evaluation of the specimens both control and experimental will be examined at 50 X magnification for comparison of surface characteristics and morphology. One-way ANOVA for comparison of time- and material-specific mean Vickers microhardness values and post hoc pair-wise comparisons was employed to assess statistically significant differences in the mean values (p<0.05). Results: The diametral tensile strength test of all specimens including the modified control and experimental showed incremental decreases in the DTS as compared to the control mixed as per the manufacturer’s specifications. The Vickers values illustrated minimal variation of Vickers microhardness for the control and experimental group. The surface morphological evaluation illustrated various differences between the control, modified control and the Zinc Oxide formulations. Conclusions: Alterations in the liquid powder ration of the orthodontic resin modified glass ionomer adhesive resulted in a reduction of the DTS. The addition of both 10% and 20% zinc oxide powder also resulted in a significant reduction of the DTS as compared to the manufacturers mix proportions of liquid and powder. The Vickers microhardness did not illustrate a significant alteration in any of the specimens. The addition of both 10% and 20% zinc oxide powder to the mixture reduced the modulus and stiffness as compared to both of the control groups. Lastly, the morphology of the experimental samples with the zinc oxide showed a more irregular surface at the fracture site.
Temple University--Theses
Silva, Jo?o Moreno Vilas Boas de Souza. "Adapta??o de um sistema automatizado para medi??o de microdureza." Universidade Federal do Rio Grande do Norte, 2006. http://repositorio.ufrn.br:8080/jspui/handle/123456789/15543.
Full textThe hardness test is thoroughly used in research and evaluation of materials for quality control. However, this test results are subject to uncertainties caused by the process operator in the moment of the mensuration impression diagonals make by the indenter in the sample. With this mind, an automated equipment of hardness mensuration was developed. The hardness value was obtained starting from the mensuration of plastic deformation suffered by the material to a well-known load. The material deformation was calculated through the mensuration of the difference between the progress and retreat of a diamond indenter on the used sample. It was not necessary, therefore, the manual mensuration of the diagonals, decreasing the mistake source caused by the operator. Tension graphs of versus deformation could be analyzed from data obtained by the accomplished analysis, as well as you became possible a complete observation of the whole process. Following, the hardness results calculated by the experimental apparatus were compared with the results calculated by a commercial microhardness machine with the intention of testing its efficiency. All things considered, it became possible the materials hardness mensuration through an automated method, which minimized the mistakes caused by the operator and increased the analysis reliability
O ensaio de dureza ? amplamente empregado em pesquisa e avalia??o de materiais para controle de qualidade. Entretanto, os resultados desse ensaio est?o sujeitos a erros causados pelo operador do processo no momento da medi??o das diagonais da impress?o deixada pelo penetrador na amostra ensaiada. Desse modo, fora desenvolvido um equipamento de medi??o de dureza automatizado. O valor de dureza foi obtido a partir da medi??o da deforma??o pl?stica sofrida pelo material a uma carga conhecida. A deforma??o do material foi calculada atrav?s da medi??o da diferen?a entre o avan?o e o recuo de um penetrador de diamante sobre a amostra utilizada. N?o foi necess?rio, portanto, a medi??o manual das diagonais, excluindo-se a fonte de erro causada pelo operador. Gr?ficos de tens?o versus deforma??o puderam ser analisados a partir de dados obtidos dos ensaios realizados, assim como tomou-se poss?vel um completo monitoramento de todo o processo. Em seguida, as durezas calculadas pelo aparato experimental foram comparadas com as durezas calculadas em um microdur?metro comercial com o intuito de testar sua efici?ncia. Desse forma, tornou-se poss?vel a medi??o de dureza de materiais atrav?s de um m?todo automatizado, que excluiu os erros causados pelo operador e aumentou a confiabilidade dos ensaios
Watts, D. Y. "An investigation of the mechanical properties of InGaAsP and related materials using microhardness indentation techniques." Thesis, University of Southampton, 1986. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.373576.
Full textGromov, V. E., N. A. Soskova, S. V. Raikov, E. A. Budovskikh, A. V. Ionina, I. V. Lushina, and S. V. Konovalov. "Nanosize Structure Phase States of Ti Surface Layer Formed During Electroexplosive Carboborating." Thesis, Сумський державний університет, 2012. http://essuir.sumdu.edu.ua/handle/123456789/34804.
Full textBooks on the topic "Microhardness"
Stoĭko, Fakirov, ed. Microhardness of polymers. Cambridge, [England]: Cambridge University Press, 2000.
Find full textGlazov, V. M., and V. N. Vigdorovich. Microhardness of Metals and Semiconductors. Boston, MA: Springer US, 1995. http://dx.doi.org/10.1007/978-1-4684-8246-1.
Full textBai, Li. Microhardness of normal and rachitic teeth. [Toronto: Faculty of Dentistry, University of Toronto], 1994.
Find full textBai, Li. Microhardness of normal and rachitic teeth. Ottawa: National Library of Canada, 1993.
Find full textBrady, Michael P. Microstructure/oxidation/microhardness correlations in Þ-based and [tau]-based Al-Ti-Cr alloys. [Washington, D.C: National Aeronautics and Space Administration, 1994.
Find full textC, Santos, U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research. Division of Engineering Technology, University of California, Santa Barbara. Dept. of Mechanical Engineering, and Tōhoku Daigaku. Kinzoku Zairyō Kenkyūjo, eds. The characterization of Vicker's microhardness indentations and pile-up profiles as a strain-hardening microprobe. Washington, DC: Division of Engineering Technology, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission, 1998.
Find full textBrady, Michael P. Microstructure/oxidation/microhardness correlations in Þ-based and [tau]-based Al-Ti-Cr alloys. [Washington, D.C: National Aeronautics and Space Administration, 1994.
Find full textAsthana, R. Influence of CR and W alloying on the fiber-matrix interfacial shear strength in cast and directionally solidified sapphire NiAI composites. Washington, DC: National Aeronautics and Space Administration, 1995.
Find full textPolzin, T., and H. Stute. Intercomparison of Microhardness Measurements (Intercomparison of Microhardness Measurements). European Communities / Union (EUR-OP/OOPEC/OPOCE), 1992.
Find full textCalleja, F. J. Baltá, and S. Fakirov. Microhardness of Polymers. Cambridge University Press, 2009.
Find full textBook chapters on the topic "Microhardness"
Gooch, Jan W. "Knoop Microhardness." In Encyclopedic Dictionary of Polymers, 413. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_6695.
Full textCalleja, F. J. Balta, and H. G. Kilian. "Microhardness of Semicrystalline Polymers." In Integration of Fundamental Polymer Science and Technology, 517–26. Dordrecht: Springer Netherlands, 1986. http://dx.doi.org/10.1007/978-94-009-4185-4_65.
Full textBaltá Calleja, F. J. "Microhardness relating to crystalline polymers." In Characterization of Polymers in the Solid State I: Part A: NMR and Other Spectroscopic Methods Part B: Mechanical Methods, 117–48. Berlin, Heidelberg: Springer Berlin Heidelberg, 1985. http://dx.doi.org/10.1007/3-540-13779-3_19.
Full textPoelt, P., and A. Fian. "Steels, Carbon Concentration, and Microhardness." In Modern Developments and Applications in Microbeam Analysis, 201–5. Vienna: Springer Vienna, 1998. http://dx.doi.org/10.1007/978-3-7091-7506-4_28.
Full textBaltá Calleja, F. J. "Structure-Microhardness Correlation of Polymers and Blends." In Structure Development During Polymer Processing, 145–62. Dordrecht: Springer Netherlands, 2000. http://dx.doi.org/10.1007/978-94-011-4138-3_6.
Full textNikiforova, Z. "New Data on Microhardness of Placer Gold." In Springer Proceedings in Earth and Environmental Sciences, 115–18. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-22974-0_26.
Full textChen, Xizhang, Sergey Konovalov, Victor Gromov, and Yurii Ivanov. "Microhardness and Wear Resistance of Modified Layers." In Surface Processing of Light Alloys Subject to Concentrated Energy Flows, 161–70. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-33-4228-6_8.
Full textYu, Li Ping, Han Ning Xiao, and Yin Cheng. "Microhardness and Machinability of Fluorphlogopite-Mullite Glass-Ceramics." In Key Engineering Materials, 1576–79. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-456-1.1576.
Full textDavtyan, L. K., A. G. Nalbandyan, A. L. Pogosyan, and R. O. Sharkhatunyan. "Growth and Microhardness of a Potassium Pentaborate Single Crystal." In Growth of Crystals, 133–40. Boston, MA: Springer US, 1987. http://dx.doi.org/10.1007/978-1-4615-7122-3_12.
Full textSchmitt, Lena, C. Lurtz, D. Behrend, and K. P. Schmitz. "Registered Microhardness of human teeth parts and dental filling composites." In IFMBE Proceedings, 2252–54. Berlin, Heidelberg: Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-540-89208-3_539.
Full textConference papers on the topic "Microhardness"
Marotta, E., S. Mirmira, L. Fletcher, Axel Hanenkamp, E. Marotta, S. Mirmira, L. Fletcher, and Axel Hanenkamp. "Vickers microhardness of ceramic coatings for thermal contact conductance - Microhardness models with experimental comparison." In 32nd Thermophysics Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1997. http://dx.doi.org/10.2514/6.1997-2460.
Full textMartynova, Kateryna, and Elena Rogacheva. "Microhardness of Sb2Te3 - Bi2Te3 solid solutions." In 2015 International Young Scientists Forum on Applied Physics (YSF). IEEE, 2015. http://dx.doi.org/10.1109/ysf.2015.7333243.
Full textFic, S., A. Szewczak, and Ł. Guz. "Microhardness of the slurries and cement mortars." In THE 3RD JOINT INTERNATIONAL CONFERENCE ON ENERGY ENGINEERING AND SMART MATERIALS (ICEESM-2018) AND INTERNATIONAL CONFERENCE ON NANOTECHNOLOGY AND NANOMATERIALS IN ENERGY (ICNNE-2018). Author(s), 2018. http://dx.doi.org/10.1063/1.5051102.
Full textJogad, Rashmi M., Rakesh Kumar, P. S. R. Krishna, M. S. Jogad, G. P. Kothiyal, and R. D. Mathad. "Optical and microhardness measurement of lead silicate." In SOLID STATE PHYSICS: PROCEEDINGS OF THE 57TH DAE SOLID STATE PHYSICS SYMPOSIUM 2012. AIP, 2013. http://dx.doi.org/10.1063/1.4791186.
Full textAkimov, V. V., D. A. Negrov, V. Yu Putintsev, and A. R. Putintseva. "The ion implantation influence on the microhardness." In INTERNATIONAL CONFERENCE ON SCIENCE AND APPLIED SCIENCE (ICSAS2020). AIP Publishing, 2020. http://dx.doi.org/10.1063/5.0028020.
Full textXu, L. S., X. H. Chen, X. J. Liu, Y. Yu, and Y. R. Wu. "Thermal conductivity and microhardness of MWCNTs/copper nanocomposites." In 2011 International Symposium on Advanced Packaging Materials (APM). IEEE, 2011. http://dx.doi.org/10.1109/isapm.2011.6105686.
Full textMironov, Yuri P., Elena G. Barmina, and Vladimir A. Beloborodov. "Microhardness of TiNi alloy after friction stir processing." In PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON PHYSICAL MESOMECHANICS. MATERIALS WITH MULTILEVEL HIERARCHICAL STRUCTURE AND INTELLIGENT MANUFACTURING TECHNOLOGY. AIP Publishing, 2020. http://dx.doi.org/10.1063/5.0035060.
Full textRahmoun, K., A. Iost, V. Keryvin, G. Guillemot, J. C. Sangleboeuf, M. Guendouz, and L. Haji. "Vickers microhardness of oxidized and nonoxidized porous silicon." In 2014 North African Workshop on Dielectric Materials for Photovoltaic Systems (NAWDMPV). IEEE, 2014. http://dx.doi.org/10.1109/nawdmpv.2014.6997620.
Full textBelevskii, S. S., J. I. Bobanova, V. A. Buravets, A. V. Gotelyak, V. V. Danilchuk, S. A. Silkin, N. I. Tsyntsaru, and A. I. Dikusar. "THE INFLUENCE OF GLUCONATE BATH PARAMETERS ON THE RATE OF ELECTRODEPOSITION AND MECHANICAL PROPERTIES OF Co–W COATINGS." In BALTTRIB. Aleksandras Stulginskis University, 2017. http://dx.doi.org/10.15544/balttrib.2017.03.
Full textRevo, S., T. Avramenko, M. Melnichenko, K. Ivanenko, and P. Teselko. "Morphological structure and microhardness of ground thermally expanded graphite." In 2017 IEEE 7th International Conference "Nanomaterials: Application & Properties" (NAP). IEEE, 2017. http://dx.doi.org/10.1109/nap.2017.8190227.
Full textReports on the topic "Microhardness"
Das, B. Rock characterization microhardness technique. Natural Resources Canada/ESS/Scientific and Technical Publishing Services, 1986. http://dx.doi.org/10.4095/304894.
Full textChan, Helen M. High Temperature Microhardness Tester. Fort Belvoir, VA: Defense Technical Information Center, January 1990. http://dx.doi.org/10.21236/ada219567.
Full textChen, I.-Wei. A High Temperature Microhardness Tester for Structural Ceramics. Fort Belvoir, VA: Defense Technical Information Center, July 2001. http://dx.doi.org/10.21236/ada388223.
Full textDas, B. The microhardness technique and its application to coal and coal mining. Natural Resources Canada/ESS/Scientific and Technical Publishing Services, 1985. http://dx.doi.org/10.4095/304819.
Full textOkulov, Artem, Yurii Korobov, Alexander Stepchenkov, Aleksey Makarov, Olga Iusupova, Tatyana Kuznetsova, Yuliya Korkh, and Evgeny Kharanzhevskiy. Microhardness evolution of laser-deposited equiatomic FeNiCr coatings in-situ alloyed with B4C. Peeref, June 2023. http://dx.doi.org/10.54985/peeref.2306p9084629.
Full textAmalia, Nadya Rafika, Ridhofar Akbar Khusnul, Ninuk Hariyani, Alexander Patera Nugraha, Arief Cahyanto, Kaushik Sengupta, Ankur Razdan, and Kamal Hanna. The Comparative Effect of CPP-ACP and TCP for Enamel Microhardness: A Systematic Review. INPLASY - International Platform of Registered Systematic Review and Meta-analysis Protocols, February 2024. http://dx.doi.org/10.37766/inplasy2024.2.0118.
Full textSchmale, D. T., and R. J. Bourcier. Description of the Nano. delta. Indenter/trademark/; An ultra-low-load microhardness indentation test machine. Office of Scientific and Technical Information (OSTI), June 1989. http://dx.doi.org/10.2172/6088256.
Full textSantos, C. Jr, G. R. Odette, G. E. Lucas, B. Schroeter, D. Klinginsmith, and T. Yamamoto. The characterization of Vicker`s microhardness indentations and pile-up profiles as a strain-hardening microprobe. Office of Scientific and Technical Information (OSTI), April 1998. http://dx.doi.org/10.2172/595663.
Full textQuiroz, Josselyn, and Sabina Mungi. Efficacy and Efficiency in vitro, of chemo-mechanical caries removal against rotary system, in permanent teeth: A systematic review. INPLASY - International Platform of Registered Systematic Review and Meta-analysis Protocols, February 2023. http://dx.doi.org/10.37766/inplasy2023.2.0001.
Full text