Relevant bibliographies by topics / Microfluidics – Equipment and supplies

Academic literature on the topic 'Microfluidics – Equipment and supplies'

Author: Grafiati
Published: 10 December 2022
Last updated: 28 January 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Contents

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Microfluidics – Equipment and supplies.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Microfluidics – Equipment and supplies"

1

Grant, Nicholas, Brian Geiss, Stuart Field, August Demann, and Thomas W. Chen. "Design of a Hand-Held and Battery-Operated Digital Microfluidic Device Using EWOD for Lab-on-a-Chip Applications." Micromachines 12, no. 9 (September 1, 2021): 1065. http://dx.doi.org/10.3390/mi12091065.

Full text
Abstract:
Microfluidics offer many advantages to Point of Care (POC) devices through lower reagent use and smaller size. Additionally, POC devices offer the unique potential to conduct tests outside of the laboratory. In particular, Electro-wetting on Dielectric (EWOD) microfluidics has been shown to be an effective way to move and mix liquids enabling many PoC devices. However, much of the research surrounding these microfluidic systems are focused on a single aspect of the system capability, such as droplet control or a specific new application at the device level using the EWOD technology. Often in these experiments the supporting systems required for operation are bench top equipment such as function generators, power supplies, and personal computers. Although various aspects of how an EWOD device is capable of moving and mixing droplets have been demonstrated at various levels, a complete self-contained and portable lab-on-a-chip system based on the EWOD technology has not been well demonstrated. For instance, EWOD systems tend to use high voltage alternating current (AC) signals to actuate electrodes, but little consideration is given to circuitry size or power consumption of such components to make the entire system portable. This paper demonstrates the feasibility of integrating all supporting hardware and software to correctly operate an EWOD device in a completely self-contained and battery-powered handheld unit. We present results that demonstrate a complete sample preparation flow for deoxyribonucleic acid (DNA) extraction and isolation. The device was designed to be a field deployable, hand-held platform capable of performing many other sample preparation tasks automatically. Liquids are transported using EWOD and controlled via a programmable microprocessor. The programmable nature of the device allows it to be configured for a variety of tests for different applications. Many considerations were given towards power consumption, size, and system complexity which make it ideal for use in a mobile environment. The results presented in this paper show a promising step forward to the portable capability of microfluidic devices based on the EWOD technology.
APA, Harvard, Vancouver, ISO, and other styles
2

Zhou, Wuping, Cong Liu, Tao Zhang, Keming Jiang, Haiwen Li, Zhiqiang Zhang, and Yuguo Tang. "Low Cost, Easily-Assembled Centrifugal Buoyancy-Based Emulsification and Digital PCR." Micromachines 13, no. 2 (January 24, 2022): 171. http://dx.doi.org/10.3390/mi13020171.

Full text
Abstract:
Microfluidic-based droplet generation approaches require the design of microfluidic chips and a precise lithography process, which require skilled technicians and a long manufacturing time. Here we developed a centrifugal buoyancy-based emulsification (CBbE) method for producing droplets with high efficiency and minimal fabrication time. Our approach is to fabricate a droplet generation module that can be easily assembled using syringe needles and PCR tubes. With this module and a common centrifuge, high-throughput droplet generation with controllable droplet size could be realized in a few minutes. Experiments showed that the droplet diameter depended mainly on centrifugal speed, and droplets with controllable diameter from 206 to 158 μm could be generated under a centrifugal acceleration range from 14 to 171.9 g. Excellent droplet uniformity was achieved (CV < 3%) when centrifugal acceleration was greater than 108 g. We performed digital PCR tests through the CBbE approach and demonstrated that this cost-effective method not only eliminates the usage of complex microfluidic devices and control systems but also greatly suppresses the loss of materials and cross-contamination. CBbE-enabled droplet generation combines both easiness and robustness, and breaks the technical challenges by using conventional lab equipment and supplies.
APA, Harvard, Vancouver, ISO, and other styles
3

Rumaner, Horowitz, Ovadya, and Folch. "Thread as a Low-Cost Material for Microfluidic Assays on Intact Tumor Slices." Micromachines 10, no. 7 (July 17, 2019): 481. http://dx.doi.org/10.3390/mi10070481.

Full text
Abstract:
In this paper we describe the use of thread as a low-cost material for a microfluidic chemosensitivity assay that uses intact tumor tissue ex vivo. Today, the need for new and effective cancer treatments is greater than ever, but unfortunately, the cost of developing new chemotherapy drugs has never been higher. Implementation of low-cost microfluidic techniques into drug screening devices could potentially mitigate some of the immense cost of drug development. Thread is an ideal material for use in drug screening as it is inexpensive, widely available, and can transport liquid without external pumping hardware, i.e., via capillary action. We have developed an inexpensive microfluidic delivery prototype that uses silk threads to selectively deliver fluids onto subregions of living xenograft tumor slices. Our device can be fabricated completely for less than $0.25 in materials and requires no external equipment to operate. We found that by varying thread materials, we could optimize device characteristics, such as flow rate; we specifically explored the behavior of silk, nylon, cotton, and polyester. The incremental cost of our device is insignificant compared to the tissue culture supplies. The use of thread as a microfluidic material has the potential to produce inexpensive, accessible, and user-friendly devices for drug testing that are especially suited for low-resource settings.
APA, Harvard, Vancouver, ISO, and other styles
4

Kehren, A., MG Procopio, B. Pelz, Z. Siddiqui, K. Roman, S. Adnane, S. Brajkovic, C. Hoyt, DG Dupouy, and A. Soltermann. "P03.07 Fast automated microfluidic-based multiplexed immunofluorescence for tumor microenvironment analysis." Journal for ImmunoTherapy of Cancer 8, Suppl 2 (October 2020): A25.1—A25. http://dx.doi.org/10.1136/jitc-2020-itoc7.47.

Full text
Abstract:
BackgroundImmuno-oncology and targeted molecular therapies have acquired a central role in the treatment of multiple cancers. Consequently, high-throughput biomarker analysis and tumor immune profiling have seen an increased demand. Multiplexed immuno-assays are a powerful tool to address these needs, but still time- and resource-consuming. Our goal is to develop a fast and automated high-plex fluorescent immunostaining procedure, using a microfluidic-based device, that can be easily implemented as routine assay.Materials and MethodsProtocol optimization has been performed on FFPE sections of human tonsil. Slides were manually deparaffinized before being entirely processed (antigen-retrieval, staining, elution and counterstaining) by Lunaphore’s autostainer, LabSatTM. The OPAL® tyramide signal amplification (TSA) system was used as detection method. Signal analysis was done on Mantra® workstation. The 6-plex panel was composed of FoxP3, PD-L1, PD-1, CD68, CD8 and pan-CK, plus DAPI counterstaining. Protocols were subsequently transferred on NSCLC representative specimens and finally assessed on a TMA cohort.ResultsOur platform allowed to reduce drastically the incubation times due to active transport of reagents across the tissue. Thereby, the automated 6-plex assay could be performed in less than 4h30min, within the timeframe of a single IHC standard assay. Protocol optimization resulted in high signal-to-background ratio for each marker and removal of previous step antibodies over 99%. LabSatTM also guaranteed remarkable signal uniformity, even over large tissue sections with less than 10% signal gradient over 1 cm. On NSCLC samples, the detected pattern and expression level for all six biomarkers were comparable to the standard chromogenic stainings performed with standard automated tissue stainer.ConclusionsLabSatTM autostainer enables multistaining runs in a timely manner, opening the perspective of rapid simultaneous detection of multiple markers in their morphological context on a routine-based approach. This versatile analysis tool can offer a better and more quantitative understanding of tumor heterogeneity and microenvironmental interactions, allowing advances in targeted therapy for lung cancer as well as broader spectrum of malignancies.Disclosure InformationA. Kehren: A. Employment (full or part-time); Significant; Lunaphore Technologies SA. C. Other Research Support (supplies, equipment, receipt of drugs or other in-kind support); Significant; Akoya Biosciences. M.G. Procopio: B. Research Grant (principal investigator, collaborator or consultant and pending grants as well as grants already received); Significant; KTI grant (Schweiz). B. Pelz: A. Employment (full or part-time); Significant; Lunaphore Technologies SA. C. Other Research Support (supplies, equipment, receipt of drugs or other in-kind support); Significant; Akoya Biosciences. Z. Siddiqui: A. Employment (full or part-time); Modest; Lunaphore Technologies SA. K. Roman: A. Employment (full or part-time); Significant; Akoya Biosciences. S. Adnane: A. Employment (full or part-time); Modest; Lunaphore Technologies SA. S. Brajkovic: A. Employment (full or part-time); Significant; Lunaphore Technologies SA. C. Hoyt: A. Employment (full or part-time); Significant; Akoya Biosciences. D.G. Dupouy: A. Employment (full or part-time); Significant; Lunaphore Technologies SA. E. Ownership Interest (stock, stock options, patent or other intellectual property); Significant; Lunaphore Technologies SA. A. Soltermann: A. Employment (full or part-time); Significant; Institut für Klinische Pathologie Universitätsspital Zürich.
APA, Harvard, Vancouver, ISO, and other styles
5

Herrasti, Zorione, Erica de la Serna, Gisela Ruiz-Vega, and Eva Baldrich. "Developing enhanced magnetoimmunosensors based on low-cost screen-printed electrode devices." Reviews in Analytical Chemistry 35, no. 2 (July 1, 2016): 53–85. http://dx.doi.org/10.1515/revac-2016-0004.

Full text
Abstract:
AbstractElectrochemical magnetoimmunosensors combine a number of issues that guarantee extremely high performance and also compatibility with the study of complex sample matrices. First, analyte immunocapture exploits the high affinity and specificity of antibodies. Second, magnetic particles (MP) provide faster and more efficient immunocapture than binding on two-dimensional structures, separation from nontarget sample components, and concentration of the target analyte. Finally, electrochemical detection supplies sensitivity and fast signal generation using robust and potentially miniaturized measurement equipment and transducers. On the contrary, MP handling is slightly more complex for end-users and more difficult to integrate in point-of-care devices than the manipulation of a classical biosensor. Attempts have been made to automate immunomagnetic binding, and the first robotized systems and platforms for the fluorescent and spectrophotometric detection of magnetoimmunoassays have already reached the market. Among the different types of electrodes available, screen-printed electrodes (SPE) stand out because of their low production cost and yet acceptable performance and interdevice reproducibility, which make them an excellent choice for analytical applications. In addition, each SPE entails a whole electrochemical cell stamped on a planar physical substrate, which makes it possible detection in small volumes and is especially favorable for the magnetic confinement of MP and the integration of microfluidic structures. In this article, we discuss the advantages obtained by using SPE and MP for the production of electrochemical magnetoimmunosensors and the clues for the successful development of such devices. We then revise some of the most outstanding works published in the literature.
APA, Harvard, Vancouver, ISO, and other styles
6

Zavada, Jack. "Supplies and equipment." Day Care & Early Education 16, no. 2 (December 1988): 47. http://dx.doi.org/10.1007/bf01622989.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Fox, Sandra, Shauna Farr-Jones, and Mary Alice Yund. "High Throughput Screening for Drug Discovery: Continually Transitioning into New Technology." Journal of Biomolecular Screening 4, no. 4 (August 1999): 183–86. http://dx.doi.org/10.1177/108705719900400405.

Full text
Abstract:
Those working in HTS laboratories, pressured to find increasing numbers of drug leads while containing costs, are seeking larger compound sets, more automated systems to screen them faster, and an integrated set of equipment and consumables. Enabling technologies are continually being developed and suppliers are teaming up to supply integrated equipment and consumable sets. Miniaturization, microfluidic chips, subnanoliter dispensing, fluorescence, homogeneous assays for HTS, and virtual screening are just some of the evolving tools that HTS experts are continually evaluating and incorporating into drug discovery operations.
APA, Harvard, Vancouver, ISO, and other styles
8

Bécourt, Philippe. "Blister Packing Equipment for Clinical Supplies." Drug Information Journal 27, no. 3 (July 1993): 889–93. http://dx.doi.org/10.1177/009286159302700330.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Alistar, Mirela. "Mobile Microfluidics." Bioengineering 6, no. 1 (January 3, 2019): 5. http://dx.doi.org/10.3390/bioengineering6010005.

Full text
Abstract:
Microfluidics platforms can program small amounts of fluids to execute a bio-protocol, and thus, can automate the work of a technician and also integrate a large part of laboratory equipment. Although most microfluidic systems have considerably reduced the size of a laboratory, they are still benchtop units, of a size comparable to a desktop computer. In this paper, we argue that achieving true mobility in microfluidics would revolutionize the domain by making laboratory services accessible during traveling or even in daily situations, such as sport and outdoor activities. We review the existing efforts to achieve mobility in microfluidics, and we discuss the conditions mobile biochips need to satisfy. In particular, we show how we adapted an existing biochip for mobile use, and we present the results when using it during a train ride. Based on these results and our systematic discussion, we identify the challenges that need to be overcome at technical, usability and social levels. In analogy to the history of computing, we make some predictions on the future of mobile biochips. In our vision, mobile biochips will disrupt how people interact with a wide range of healthcare processes, including medical testing and synthesis of on-demand medicine.
APA, Harvard, Vancouver, ISO, and other styles
10

Sun, Yang, Xin Wang, Ke Peng Zhang, and Xiao Tang. "Study on Supplies Loading of Equipment Support Force." Applied Mechanics and Materials 333-335 (July 2013): 2089–92. http://dx.doi.org/10.4028/www.scientific.net/amm.333-335.2089.

Full text
Abstract:
This paper mathematically described the supplies loading problem of military equipment support dispatching force. Through taking all supplies average loading as the objective function, taking the same kind of supplies group loading, no overweight and overcapacity, no-repeated loading and packing as constraint conditions, optimization model was put forward. And the effectiveness of the model was validated by the example computation.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Microfluidics – Equipment and supplies"

1

Ashok, Praveen Cheriyan. "Integration methods for enhanced trapping and spectroscopy in optofluidics." Thesis, University of St Andrews, 2011. http://hdl.handle.net/10023/2546.

Full text
Abstract:
“Lab on a Chip” technologies have revolutionized the field of bio-chemical analytics. The crucial role of optical techniques in this revolution resulted in the emergence of a field by itself, which is popularly termed as “optofluidics”. The miniaturization and integration of the optical parts in the majority of optofluidic devices however still remains a technical challenge. The works described in this thesis focuses on developing integration methods to combine various optical techniques with microfluidics in an alignment-free geometry, which could lead to the development of portable analytical devices, suitable for field applications. The integration approach was applied to implement an alignment-free optofluidic chip for optical chromatography; a passive optical fractionation technique fractionation for cells or colloids. This system was realized by embedding large mode area photonic crystal fiber into a microfluidic chip to achieve on-chip laser beam delivery. Another study on passive sorting envisages an optofluidic device for passive sorting of cells using an optical potential energy landscape, generated using an acousto-optic deflector based optical trapping system. On the analytical side, an optofluidic chip with fiber based microfluidic Raman spectroscopy was realized for bio-chemical analysis. A completely alignment-free optofluidic device was realized for rapid bio-chemical analysis in the first generation by embedding a novel split Raman probe into a microfluidic chip. The second generation development of this approach enabled further miniaturization into true microfluidic dimensions through a technique, termed Waveguide Confined Raman Spectroscopy (WCRS). The abilities of WCRS for online process monitoring in a microreactor and for probing microdroplets were explored. Further enhanced detection sensitivity of WCRS with the implementation of wavelength modulation based fluorescent suppression technique was demonstrated. WCRS based microfluidic devices can be an optofluidic analogue to fiber Raman probes when it comes to bio-chemical analysis. This allows faster chemical analysis with reduced required sample volume, without any special sample preparation stage which was demonstrated by analyzing and classifying various brands of Scotch whiskies using this device. The results from this study also show that, along with Raman spectroscopic information, WCRS picks up the fluorescence information as well, which might enhance the classification efficiency. A novel microfabrication method for fabricating polymer microlensed fibers is also discussed. The microlensed fiber, fabricated with this technique, was combined with a microfluidic gene delivery system to achieve an integrated system for optical transfection with localized gene delivery.
APA, Harvard, Vancouver, ISO, and other styles
2

Harty, Michael David. "Statistical process control as a tool for expert system diagnostics." Thesis, Georgia Institute of Technology, 1989. http://hdl.handle.net/1853/24853.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Al-Ansary, Hany A. "Investigation and improvement of ejector-driven heating and refrigeration systems." Diss., Georgia Institute of Technology, 2004. http://hdl.handle.net/1853/36540.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Bares, John Alvin 1951. "Preliminary equipment selection analysis of mining shovels and haulage trucks." Thesis, The University of Arizona, 1987. http://hdl.handle.net/10150/558076.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Rothsching, Norman. "The effect of shaft stiffness on the performance of the ice hockey slap shot." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1997. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape11/PQDD_0001/MQ43940.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Villaseñor-Herrera, Alejandro. "Recoil effect of the ice hockey stick during a slap shot." Thesis, McGill University, 2004. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=81450.

Full text
Abstract:
This thesis examined the 'recoil' effect of the ice hockey stick shaft during a stationary slap shot. Nine subjects were tested. Four were classified as 'elite' and the remaining five as the 'recreational' group. Their performances were evaluated by simultaneously recording stick movement and bending from high-speed video capture (1000 Hz) and puck acceleration from a triaxial accelerometer positioned inside the puck. Data were analyzed with a one-way ANOVA for several dependant variables including final puck velocity, stick shaft bending, blade-puck contact time and stick kinetic energy. The results indicated that: (1) the puck velocity was influenced by skill level, blade-puck contact time and stick bending energy but not puck acceleration. Further studies are needed to address the influence of events before and after blade-puck contact as well as the strength of the player on the mechanical energy and impulse given to the puck.
APA, Harvard, Vancouver, ISO, and other styles
7

Dowler, Patrick McLean 1983. "Effects of ice hockey facial protectors on response time and kinematics." Thesis, McGill University, 2008. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=111600.

Full text
Abstract:
Ice hockey facial protectors are essential to prevent eye and dental injuries but must also not encumber vision and, in turn, players' performance. The purpose of this study was to investigate the effects of three different facial protection conditions on response time (RsT) and kinematics in a goal directed pointing task: helmet (control), visor, and cage. A 13 light target array and six-camera Vicon Mx system were used to collect response time and kinematic data. Subjects recruited were 16 male and 12 female varsity ice hockey players (n=28). Results demonstrated that although kinematics remained largely unaffected, throughout the visual field test RsT increased significantly with the cage (23 ms) as well as delayed head movement for both the visor (14 ms) and cage (18 ms). These differences may well represent a functional disadvantage to a player's performance given the dynamic, open environment where multiple players contest for puck possession. In summary, further research is warranted to achieve both optimal performance and safety.
APA, Harvard, Vancouver, ISO, and other styles
8

Aspelund, Kristinn A. "Optimization of plate-fin-and-tube condenser performance and design for refrigerant R-410A air-conditioner." Thesis, Georgia Institute of Technology, 2001. http://hdl.handle.net/1853/19488.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Triantafillopoulos, Nicholas G. "Fluid dynamics of short-dwell blade coater ponds and their relationship to cross directional coat weight nonuniformities." Diss., Georgia Institute of Technology, 1991. http://hdl.handle.net/1853/5592.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Woo, Timothy Keith. "A three dimensional comparison of elite and recreational ice hockey slap shots /." Thesis, McGill University, 2004. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=81455.

Full text
Abstract:
The purpose of this thesis was to examine the three dimensional kinematic differences between elite and recreational ice hockey players while performing a stationary slap shot. Ten subjects, five elite-level players and five recreational players, each performed five stationary ice hockey slap shots. Data were collected using the UltratrakRTM electromagnetic system (Polhemus Inc., Burlington, VT, USA) at 60 Hz. Kinematics of the torso, arms and hockey stick were examined using a multiple analysis of variance (MANOVA). The results indicated that: (1) the elite subjects shot significantly (p < 0.05) faster due to the translational movement aspect of the stick; (2) the proximal to distal kinematic chain sequence of the elite subjects was better than the recreational subjects; and (3) the elite subjects showed less variability in stick movement within groups, than the recreational subjects. Further studies are needed to address kinematics of the lower limbs and of different ice hockey stick skills.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Microfluidics – Equipment and supplies"

1

Berthier, Jean. Microdrops and digital microfluidics. Norwich, NY: William Andrew Pub., 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Differentiating surgical equipment and supplies. Philadelphia, PA: F.A. Davis Co., 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Cassidy, Victor. Metal welding equipment and supplies. Norwalk, CT: Business Communications Co., 2002.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Bronski, Paula. Synfuels: Equipment, technology, supplies, capital. Norwalk, CT: Business Communications Co., 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Rutherford, Colleen. Differentiating surgical equipment and supplies. Philadelphia, PA: F.A. Davis Co., 2009.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Demolition equipment. Osceola, WI: Motorbooks International, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Canada, Industry Science and Technology Canada. Automotive original equipment parts. Ottawa: Industry, Science and Technology Canada, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Hester, Edward, and Joe Iorillo. World oilfield equipment. Cleveland, Ohio: Freedonia Group, 2003.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

1936-, Robertson Lynne Nannen, ed. Food service equipment. 3rd ed. Ames: Iowa State University Press, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

(Organization), CAPT, ed. Process technology equipment. Upper Saddle River, NJ: Prentice Hall, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Microfluidics – Equipment and supplies"

1

Fisher, Richard C., and Dominic Awariyah Adondaa. "Equipment and Supplies." In Global Orthopedics, 31–37. New York, NY: Springer New York, 2014. http://dx.doi.org/10.1007/978-1-4614-1578-7_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Fisher, Richard C., and Dominic Awariyah Adondaa. "Equipment and Supplies." In Global Orthopedics, 31–36. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-13290-3_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Goltra, Peter S. "Medical Supplies and Equipment." In Medcin, 691–706. New York, NY: Springer New York, 1997. http://dx.doi.org/10.1007/978-1-4612-2286-6_87.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Richardson, Graham T. "Illustrator’s Equipment and Supplies." In Illustrations, 205–70. Totowa, NJ: Humana Press, 1985. http://dx.doi.org/10.1007/978-1-4612-4992-4_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Dykstra, Michael J., and Laura E. Reuss. "Electron Microscopy Equipment and Supplies." In Biological Electron Microscopy, 493–98. Boston, MA: Springer US, 2003. http://dx.doi.org/10.1007/978-1-4419-9244-4_32.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Erickson, Paul A. "Logistics: Expertise, Personnel, Equipment, Supplies." In Effective Environmental Emergency Responses, 23–32. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-05893-6_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Hyman, Stanley. "Ten Suppliers of Electromedical Equipment." In Supplies Management for Health Services, 130–70. London: Routledge, 2022. http://dx.doi.org/10.4324/9781003280231-11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Vandormael, Michel, Thomas Ischinger, and Robert Roth. "Angioplasty Equipment and Supplies: Technical Considerations." In Practice of Coronary Angioplasty, 93–127. Berlin, Heidelberg: Springer Berlin Heidelberg, 1986. http://dx.doi.org/10.1007/978-3-642-70815-2_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Tricker, Ray. "Electrical equipment, components, accessories and supplies." In Wiring Regulations Pocket Book, 187–235. London: Routledge, 2021. http://dx.doi.org/10.1201/9781003165170-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Tricker, Ray. "Electrical equipment, components, accessories and supplies." In Wiring Regulations in Brief, 153–206. Fourth edition. | Abingdon, Oxon ; New York : Routledge, 2021.: Routledge, 2020. http://dx.doi.org/10.1201/9781003001829-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Microfluidics – Equipment and supplies"

1

Asano, Noboru, Kiyoshi Tsutsui, Takashi Yamashita, and Shizuo Furubo. "Power supplies for customer premises telecommunications equipment." In TELESCON '94 - The First International Telecommunications Energy Special Conference. IEEE, 1994. http://dx.doi.org/10.1109/telesc.1994.4794313.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Cucchietti, Flavio, Luca Giacomello, Patrizia Vaccarone, and Sara Rollino. "Ecoefficiency of universal power supplies for customer premises equipment." In INTELEC 2011 - 2011 33rd International Telecommunications Energy Conference. IEEE, 2011. http://dx.doi.org/10.1109/intlec.2011.6099736.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Broadley, E. T. "Autonomous Power Supplies for Remote, Safety Critical Electronic Equipment." In Road Transport Information and Control Conference 2014 (RTIC 2014). Institution of Engineering and Technology, 2014. http://dx.doi.org/10.1049/cp.2014.0804.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Hubel, Allison, Jacob Hanna, Clara Mata, Katie Glass, and Ellen Longmire. "Post Thaw Processing of Red Blood Cells Using Microfluidics." In ASME 2008 Summer Bioengineering Conference. American Society of Mechanical Engineers, 2008. http://dx.doi.org/10.1115/sbc2008-192437.

Full text
Abstract:
Transfusion of red blood cells (RBCs) has been an integral part of medicine since the middle of the last century. In particular, RBCs have been the most transfused blood product in battlefield trauma care[1]. Cryopreservation of red blood cells has been used in particular by the military for a variety of reasons. The ability to preserve cells facilitates transportation of blood from one location to another. Combat can result in sharp increases in blood use for the treatment of civilian and military and frozen blood supplies can be used to meet variations in blood demand. In the civilian blood services, cryopreserved blood is typically used only for rare blood types[2] or for transfusion of neonates[3].
APA, Harvard, Vancouver, ISO, and other styles
5

Mancini, N. "Canadian Standards Association Certification Requirements for Telephone Equipment Power Supplies." In INTELEC '86. IEEE, 1986. http://dx.doi.org/10.1109/intlec.1986.4794500.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Torok, Lajos, and Stig Munk-Nielsen. "Effect of voltage sags on digitally controlled line connected switched-mode power supplies." In 2012 13th International Conference on Optimization of Electrical and Electronic Equipment (OPTIM). IEEE, 2012. http://dx.doi.org/10.1109/optim.2012.6231757.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Yeh, L. T. "Transient Thermal Analysis of Outdoor Electronic Equipment." In ASME 1997 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1997. http://dx.doi.org/10.1115/imece1997-1215.

Full text
Abstract:
Abstract An outdoor electronic equipment is under consideration. In order to attain the desired system performance and reliability, the junction temperature of all electronic components and the base plate temperature of the power supply under the worst environmental conditions must be kept below 105°C and 85°C, respectively. A system level transient analysis is performed to determine the temperatures of the internal air and the power supplies which are mounted to the internal structures of the system. The transient is caused by the daily cycle of ambient temperature and solar flux. The internal air temperature and the base plate temperature of the power supply are computed for a 24-hour period. The above thermal design limits are met with the computed internal air temperatures and flow rates.
APA, Harvard, Vancouver, ISO, and other styles
8

Gherman, Tudor, Dorin Petreus, and Remus Teodorescu. "A Method for Accelerating FPGA Based Digital Control of Switched Mode Power Supplies." In 2019 International Aegean Conference on Electrical Machines and Power Electronics (ACEMP) & 2019 International Conference on Optimization of Electrical and Electronic Equipment (OPTIM). IEEE, 2019. http://dx.doi.org/10.1109/acemp-optim44294.2019.9007156.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Stoegerer, Franz, and Thomas Panhofer. "High-Efficiency Low Voltage/High Current Power Supplies for High Performance Digital Equipment by using GaN FET Technology." In 2019 European Space Power Conference (ESPC). IEEE, 2019. http://dx.doi.org/10.1109/espc.2019.8931977.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Hayasaka, Hiroki, Kaisei Kanetani, Sohei Nakashima, Masahiro Yamazaki, Tadatoshi Babasaki, Risshi Kondo, and Masami Amano. "Method for detection of lot defects for maintenance of ICT power supplies and air conditioning equipment and verification results." In 2017 IEEE International Telecommunications Energy Conference (INTELEC). IEEE, 2017. http://dx.doi.org/10.1109/intlec.2017.8214122.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Microfluidics – Equipment and supplies"

1

CORPS OF ENGINEERS WASHINGTON DC. Maintenance of Supplies and Equipment: Materiel Maintenance Policies. Fort Belvoir, VA: Defense Technical Information Center, February 1999. http://dx.doi.org/10.21236/ada404386.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

ARMY MATERIEL COMMAND ALEXANDRIA VA. Maintenance of Supplies and Equipment, Guide to Reliability-Centered Maintenance. Fort Belvoir, VA: Defense Technical Information Center, June 1985. http://dx.doi.org/10.21236/ada170938.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Stroud, Mary Ann. ARIES oxide production program legacy risk reduction project: Parts, supplies, and equipment assessment 2015 report. Office of Scientific and Technical Information (OSTI), September 2015. http://dx.doi.org/10.2172/1215823.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

DEPARTMENT OF THE ARMY WASHINGTON DC. Requisition and Issue of Supplies and Equipment: Special Authorization and Procedures for Issues, Sales, and Loans. Fort Belvoir, VA: Defense Technical Information Center, February 2002. http://dx.doi.org/10.21236/ada402450.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Sloan, Larry R. Should the Commander in Chief, United States Special Operations Command Have the Authority to Develop and Acquire Special Operations- Peculiar Equipment, Material, Supplies or Services? Fort Belvoir, VA: Defense Technical Information Center, April 1989. http://dx.doi.org/10.21236/ada209781.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Doo, Johnny. Unsettled Issues Concerning the Opportunities and Challenges of eVTOL Applications during a Global Pandemic. SAE International, October 2020. http://dx.doi.org/10.4271/epr2020022.

Full text
Abstract:
Electric vertical takeoff and landing (eVTOL) aircraft technology has developed beyond the traditional aviation industry and now influences the creation of new and novel transportation applications. Some experts even suggest on-demand eVTOL logistics capabilities could be harnessed by crisis response teams to c ombat a future pandemic. The lessons of the COVID-19 crisis highlighted the challenges of managing a global pandemic response due to the difference in regional and local resources, culture, and political systems. Although there may not be a uniform crisis management strategy that the world can agree on, next-generation vertical flight vehicles could be used to distribute limited medical equipment, supplies, and personnel to hot spots faster than conventional aircraft or ground vehicles. However, creating this capability is not easy. This SAE EDGE™ Research Report by Johnny Doo addresses the opportunities and challenges of establishing an eVTOL fleet, including deployment, supporting infrastructure, and fleet management.
APA, Harvard, Vancouver, ISO, and other styles
7

Integration of STI and HIV/AIDS with MCH-FP Services: A case study of the Nakuru Municipal Council's project on strengthening STD/AIDS control. Population Council, 1997. http://dx.doi.org/10.31899/rh1997.1004.

Full text
Abstract:
Kenya’s Nakuru Municipal Council (NMC) operates five clinics located primarily in residential areas with high concentrations of people. The clinics provide basic antenatal, child welfare, STI, and other curative services, and family planning services are available at four of the clinics. One provincial referral hospital operated by the Ministry of Health also provides MCH-FP and HIV/STI services in a special STI treatment clinic. The seven public health facilities in Nakuru Municipality are participating in a collaborative project with the Department of Community Health at the University of Nairobi, the University of Manitoba in Canada, and the Nairobi Municipal City Council. The goal is to reduce the incidence of STD's, including HIV/AIDS in Kenya, through strengthening management of STDs and AIDS at the health facilities and establishing sustainable community-based STD/AIDS control activities with an emphasis on women's participation. This report describes a case study of the integration activities being undertaken by the NMC. NMC clinics have adequate basic infrastructure to provide MCH-FP and STI/HlV/AlDS services using an integrated approach, however they lack basic equipment and supplies to support the integration of these services.
APA, Harvard, Vancouver, ISO, and other styles
8

Situation analysis of LGU Health Centers for integrating RTI management within the Philippines FP/MCH Program. Population Council, 1997. http://dx.doi.org/10.31899/rh1997.1024.

Full text
Abstract:
A Situation Analysis (SA) was conducted in seven local government health centers as part of a larger project studying the feasibility of integrating RTI services within the existing Family Planning/Reproductive Health Program of the Department of Health (DOH). The SA was part of a series of baseline activities conducted by the Family Planning Operations Research and Training Project as part of its study on Integrating RTI Management in Local Government Unit Health Centers. It was conducted by Population Council, Manila, for the DOH. Participating health centers were located in a large and highly urbanized community, a medium-sized city, and two semi-urban municipalities. The research team visited these centers to examine existing facilities and equipment, staff capabilities, and client-provider interactions. Clients related their perceptions about quality of service. SA results showed that FP/MCH and other services offered in the clinics were generally satisfactory. In the clinics that had a laboratory, capacity was limited due to inadequate supplies. None of the centers could conduct basic lab tests for RTIs. As this report indicates, clinic facilities, client-provider interaction, and staff capability, though satisfactory, can still be improved. However, RTI services are either lacking or only addressed inadequately.
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Microfluidics – Equipment and supplies' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography